Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2072 insertions, 0 deletions

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
new file mode 100644
index 000000000..10055c7e4
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -0,0 +1,2072 @@
+/*
+ * This is the Fusion MPT base driver providing common API layer interface
+ * for access to MPT (Message Passing Technology) firmware.
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#ifndef MPT3SAS_BASE_H_INCLUDED
+#define MPT3SAS_BASE_H_INCLUDED
+
+#include "mpi/mpi2_type.h"
+#include "mpi/mpi2.h"
+#include "mpi/mpi2_ioc.h"
+#include "mpi/mpi2_cnfg.h"
+#include "mpi/mpi2_init.h"
+#include "mpi/mpi2_raid.h"
+#include "mpi/mpi2_tool.h"
+#include "mpi/mpi2_sas.h"
+#include "mpi/mpi2_pci.h"
+#include "mpi/mpi2_image.h"
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport_sas.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/irq_poll.h>
+
+#include "mpt3sas_debug.h"
+#include "mpt3sas_trigger_diag.h"
+#include "mpt3sas_trigger_pages.h"
+
+/* driver versioning info */
+#define MPT3SAS_DRIVER_NAME		"mpt3sas"
+#define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
+#define MPT3SAS_DESCRIPTION	"LSI MPT Fusion SAS 3.0 Device Driver"
+#define MPT3SAS_DRIVER_VERSION		"43.100.00.00"
+#define MPT3SAS_MAJOR_VERSION		43
+#define MPT3SAS_MINOR_VERSION		100
+#define MPT3SAS_BUILD_VERSION		0
+#define MPT3SAS_RELEASE_VERSION	00
+
+#define MPT2SAS_DRIVER_NAME		"mpt2sas"
+#define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
+#define MPT2SAS_DRIVER_VERSION		"20.102.00.00"
+#define MPT2SAS_MAJOR_VERSION		20
+#define MPT2SAS_MINOR_VERSION		102
+#define MPT2SAS_BUILD_VERSION		0
+#define MPT2SAS_RELEASE_VERSION	00
+
+/* CoreDump: Default timeout */
+#define MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS	(15) /*15 seconds*/
+#define MPT3SAS_COREDUMP_LOOP_DONE                     (0xFF)
+#define MPT3SAS_TIMESYNC_TIMEOUT_SECONDS		(10) /* 10 seconds */
+#define MPT3SAS_TIMESYNC_UPDATE_INTERVAL		(900) /* 15 minutes */
+#define MPT3SAS_TIMESYNC_UNIT_MASK			(0x80) /* bit 7 */
+#define MPT3SAS_TIMESYNC_MASK				(0x7F) /* 0 - 6 bits */
+#define SECONDS_PER_MIN					(60)
+#define SECONDS_PER_HOUR				(3600)
+#define MPT3SAS_COREDUMP_LOOP_DONE			(0xFF)
+#define MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP		(0x81)
+
+/*
+ * Set MPT3SAS_SG_DEPTH value based on user input.
+ */
+#define MPT_MAX_PHYS_SEGMENTS	SG_CHUNK_SIZE
+#define MPT_MIN_PHYS_SEGMENTS	16
+#define MPT_KDUMP_MIN_PHYS_SEGMENTS	32
+
+#define MCPU_MAX_CHAINS_PER_IO	3
+
+#ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
+#define MPT3SAS_SG_DEPTH		CONFIG_SCSI_MPT3SAS_MAX_SGE
+#else
+#define MPT3SAS_SG_DEPTH		MPT_MAX_PHYS_SEGMENTS
+#endif
+
+#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
+#define MPT2SAS_SG_DEPTH		CONFIG_SCSI_MPT2SAS_MAX_SGE
+#else
+#define MPT2SAS_SG_DEPTH		MPT_MAX_PHYS_SEGMENTS
+#endif
+
+/*
+ * Generic Defines
+ */
+#define MPT3SAS_SATA_QUEUE_DEPTH	32
+#define MPT3SAS_SAS_QUEUE_DEPTH		254
+#define MPT3SAS_RAID_QUEUE_DEPTH	128
+#define MPT3SAS_KDUMP_SCSI_IO_DEPTH	200
+
+#define MPT3SAS_RAID_MAX_SECTORS	8192
+#define MPT3SAS_HOST_PAGE_SIZE_4K	12
+#define MPT3SAS_NVME_QUEUE_DEPTH	128
+#define MPT_NAME_LENGTH			32	/* generic length of strings */
+#define MPT_STRING_LENGTH		64
+#define MPI_FRAME_START_OFFSET		256
+#define REPLY_FREE_POOL_SIZE		512 /*(32 maxcredix *4)*(4 times)*/
+
+#define MPT_MAX_CALLBACKS		32
+
+#define MPT_MAX_HBA_NUM_PHYS		32
+
+#define INTERNAL_CMDS_COUNT		10	/* reserved cmds */
+/* reserved for issuing internally framed scsi io cmds */
+#define INTERNAL_SCSIIO_CMDS_COUNT	3
+
+#define MPI3_HIM_MASK			0xFFFFFFFF /* mask every bit*/
+
+#define MPT3SAS_INVALID_DEVICE_HANDLE	0xFFFF
+
+#define MAX_CHAIN_ELEMT_SZ		16
+#define DEFAULT_NUM_FWCHAIN_ELEMTS	8
+
+#define IO_UNIT_CONTROL_SHUTDOWN_TIMEOUT 6
+#define FW_IMG_HDR_READ_TIMEOUT	15
+
+#define IOC_OPERATIONAL_WAIT_COUNT	10
+
+/*
+ * NVMe defines
+ */
+#define	NVME_PRP_SIZE			8	/* PRP size */
+#define	NVME_ERROR_RESPONSE_SIZE	16	/* Max NVME Error Response */
+#define NVME_TASK_ABORT_MIN_TIMEOUT	6
+#define NVME_TASK_ABORT_MAX_TIMEOUT	60
+#define NVME_TASK_MNGT_CUSTOM_MASK	(0x0010)
+#define	NVME_PRP_PAGE_SIZE		4096	/* Page size */
+
+struct mpt3sas_nvme_cmd {
+	u8	rsvd[24];
+	__le64	prp1;
+	__le64	prp2;
+};
+
+/*
+ * logging format
+ */
+#define ioc_err(ioc, fmt, ...)						\
+	pr_err("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+#define ioc_notice(ioc, fmt, ...)					\
+	pr_notice("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+#define ioc_warn(ioc, fmt, ...)						\
+	pr_warn("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+#define ioc_info(ioc, fmt, ...)						\
+	pr_info("%s: " fmt, (ioc)->name, ##__VA_ARGS__)
+
+/*
+ *  WarpDrive Specific Log codes
+ */
+
+#define MPT2_WARPDRIVE_LOGENTRY		(0x8002)
+#define MPT2_WARPDRIVE_LC_SSDT			(0x41)
+#define MPT2_WARPDRIVE_LC_SSDLW		(0x43)
+#define MPT2_WARPDRIVE_LC_SSDLF		(0x44)
+#define MPT2_WARPDRIVE_LC_BRMF			(0x4D)
+
+/*
+ * per target private data
+ */
+#define MPT_TARGET_FLAGS_RAID_COMPONENT	0x01
+#define MPT_TARGET_FLAGS_VOLUME		0x02
+#define MPT_TARGET_FLAGS_DELETED	0x04
+#define MPT_TARGET_FASTPATH_IO		0x08
+#define MPT_TARGET_FLAGS_PCIE_DEVICE	0x10
+
+#define SAS2_PCI_DEVICE_B0_REVISION	(0x01)
+#define SAS3_PCI_DEVICE_C0_REVISION	(0x02)
+
+/* Atlas PCIe Switch Management Port */
+#define MPI26_ATLAS_PCIe_SWITCH_DEVID	(0x00B2)
+
+/*
+ * Intel HBA branding
+ */
+#define MPT2SAS_INTEL_RMS25JB080_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25JB080"
+#define MPT2SAS_INTEL_RMS25JB040_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25JB040"
+#define MPT2SAS_INTEL_RMS25KB080_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25KB080"
+#define MPT2SAS_INTEL_RMS25KB040_BRANDING    \
+	"Intel(R) Integrated RAID Module RMS25KB040"
+#define MPT2SAS_INTEL_RMS25LB040_BRANDING	\
+	"Intel(R) Integrated RAID Module RMS25LB040"
+#define MPT2SAS_INTEL_RMS25LB080_BRANDING	\
+	"Intel(R) Integrated RAID Module RMS25LB080"
+#define MPT2SAS_INTEL_RMS2LL080_BRANDING	\
+	"Intel Integrated RAID Module RMS2LL080"
+#define MPT2SAS_INTEL_RMS2LL040_BRANDING	\
+	"Intel Integrated RAID Module RMS2LL040"
+#define MPT2SAS_INTEL_RS25GB008_BRANDING       \
+	"Intel(R) RAID Controller RS25GB008"
+#define MPT2SAS_INTEL_SSD910_BRANDING          \
+	"Intel(R) SSD 910 Series"
+
+#define MPT3SAS_INTEL_RMS3JC080_BRANDING       \
+	"Intel(R) Integrated RAID Module RMS3JC080"
+#define MPT3SAS_INTEL_RS3GC008_BRANDING       \
+	"Intel(R) RAID Controller RS3GC008"
+#define MPT3SAS_INTEL_RS3FC044_BRANDING       \
+	"Intel(R) RAID Controller RS3FC044"
+#define MPT3SAS_INTEL_RS3UC080_BRANDING       \
+	"Intel(R) RAID Controller RS3UC080"
+
+/*
+ * Intel HBA SSDIDs
+ */
+#define MPT2SAS_INTEL_RMS25JB080_SSDID		0x3516
+#define MPT2SAS_INTEL_RMS25JB040_SSDID		0x3517
+#define MPT2SAS_INTEL_RMS25KB080_SSDID		0x3518
+#define MPT2SAS_INTEL_RMS25KB040_SSDID		0x3519
+#define MPT2SAS_INTEL_RMS25LB040_SSDID		0x351A
+#define MPT2SAS_INTEL_RMS25LB080_SSDID		0x351B
+#define MPT2SAS_INTEL_RMS2LL080_SSDID		0x350E
+#define MPT2SAS_INTEL_RMS2LL040_SSDID		0x350F
+#define MPT2SAS_INTEL_RS25GB008_SSDID		0x3000
+#define MPT2SAS_INTEL_SSD910_SSDID		0x3700
+
+#define MPT3SAS_INTEL_RMS3JC080_SSDID		0x3521
+#define MPT3SAS_INTEL_RS3GC008_SSDID		0x3522
+#define MPT3SAS_INTEL_RS3FC044_SSDID		0x3523
+#define MPT3SAS_INTEL_RS3UC080_SSDID		0x3524
+
+/*
+ * Dell HBA branding
+ */
+#define MPT2SAS_DELL_BRANDING_SIZE                 32
+
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING        "Dell 6Gbps SAS HBA"
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING    "Dell PERC H200 Adapter"
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
+#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING    "Dell PERC H200 Modular"
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING   "Dell PERC H200 Embedded"
+#define MPT2SAS_DELL_PERC_H200_BRANDING            "Dell PERC H200"
+#define MPT2SAS_DELL_6GBPS_SAS_BRANDING            "Dell 6Gbps SAS"
+
+#define MPT3SAS_DELL_12G_HBA_BRANDING       \
+	"Dell 12Gbps HBA"
+
+/*
+ * Dell HBA SSDIDs
+ */
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID	0x1F1C
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID	0x1F1D
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID	0x1F1E
+#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID	0x1F1F
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID	0x1F20
+#define MPT2SAS_DELL_PERC_H200_SSDID		0x1F21
+#define MPT2SAS_DELL_6GBPS_SAS_SSDID		0x1F22
+
+#define MPT3SAS_DELL_12G_HBA_SSDID		0x1F46
+
+/*
+ * Cisco HBA branding
+ */
+#define MPT3SAS_CISCO_12G_8E_HBA_BRANDING		\
+	"Cisco 9300-8E 12G SAS HBA"
+#define MPT3SAS_CISCO_12G_8I_HBA_BRANDING		\
+	"Cisco 9300-8i 12G SAS HBA"
+#define MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING	\
+	"Cisco 12G Modular SAS Pass through Controller"
+#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING		\
+	"UCS C3X60 12G SAS Pass through Controller"
+/*
+ * Cisco HBA SSSDIDs
+ */
+#define MPT3SAS_CISCO_12G_8E_HBA_SSDID  0x14C
+#define MPT3SAS_CISCO_12G_8I_HBA_SSDID  0x154
+#define MPT3SAS_CISCO_12G_AVILA_HBA_SSDID  0x155
+#define MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID  0x156
+
+/*
+ * status bits for ioc->diag_buffer_status
+ */
+#define MPT3_DIAG_BUFFER_IS_REGISTERED	(0x01)
+#define MPT3_DIAG_BUFFER_IS_RELEASED	(0x02)
+#define MPT3_DIAG_BUFFER_IS_DIAG_RESET	(0x04)
+#define MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED (0x08)
+#define MPT3_DIAG_BUFFER_IS_APP_OWNED (0x10)
+
+/*
+ * HP HBA branding
+ */
+#define MPT2SAS_HP_3PAR_SSVID                0x1590
+
+#define MPT2SAS_HP_2_4_INTERNAL_BRANDING	\
+	"HP H220 Host Bus Adapter"
+#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING	\
+	"HP H221 Host Bus Adapter"
+#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING	\
+	"HP H222 Host Bus Adapter"
+#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING	\
+	"HP H220i Host Bus Adapter"
+#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING	\
+	"HP H210i Host Bus Adapter"
+
+/*
+ * HO HBA SSDIDs
+ */
+#define MPT2SAS_HP_2_4_INTERNAL_SSDID			0x0041
+#define MPT2SAS_HP_2_4_EXTERNAL_SSDID			0x0042
+#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID	0x0043
+#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID		0x0044
+#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID		0x0046
+
+/*
+ * Combined Reply Queue constants,
+ * There are twelve Supplemental Reply Post Host Index Registers
+ * and each register is at offset 0x10 bytes from the previous one.
+ */
+#define MAX_COMBINED_MSIX_VECTORS(gen35) ((gen35 == 1) ? 16 : 8)
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3	12
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35	16
+#define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET	(0x10)
+#define MPT3_MIN_IRQS					1
+
+/* OEM Identifiers */
+#define MFG10_OEM_ID_INVALID                   (0x00000000)
+#define MFG10_OEM_ID_DELL                      (0x00000001)
+#define MFG10_OEM_ID_FSC                       (0x00000002)
+#define MFG10_OEM_ID_SUN                       (0x00000003)
+#define MFG10_OEM_ID_IBM                       (0x00000004)
+
+/* GENERIC Flags 0*/
+#define MFG10_GF0_OCE_DISABLED                 (0x00000001)
+#define MFG10_GF0_R1E_DRIVE_COUNT              (0x00000002)
+#define MFG10_GF0_R10_DISPLAY                  (0x00000004)
+#define MFG10_GF0_SSD_DATA_SCRUB_DISABLE       (0x00000008)
+#define MFG10_GF0_SINGLE_DRIVE_R0              (0x00000010)
+
+#define VIRTUAL_IO_FAILED_RETRY			(0x32010081)
+
+/* High IOPs definitions */
+#define MPT3SAS_DEVICE_HIGH_IOPS_DEPTH		8
+#define MPT3SAS_HIGH_IOPS_REPLY_QUEUES		8
+#define MPT3SAS_HIGH_IOPS_BATCH_COUNT		16
+#define MPT3SAS_GEN35_MAX_MSIX_QUEUES		128
+#define RDPQ_MAX_INDEX_IN_ONE_CHUNK		16
+
+/* OEM Specific Flags will come from OEM specific header files */
+struct Mpi2ManufacturingPage10_t {
+	MPI2_CONFIG_PAGE_HEADER	Header;		/* 00h */
+	U8	OEMIdentifier;			/* 04h */
+	U8	Reserved1;			/* 05h */
+	U16	Reserved2;			/* 08h */
+	U32	Reserved3;			/* 0Ch */
+	U32	GenericFlags0;			/* 10h */
+	U32	GenericFlags1;			/* 14h */
+	U32	Reserved4;			/* 18h */
+	U32	OEMSpecificFlags0;		/* 1Ch */
+	U32	OEMSpecificFlags1;		/* 20h */
+	U32	Reserved5[18];			/* 24h - 60h*/
+};
+
+
+/* Miscellaneous options */
+struct Mpi2ManufacturingPage11_t {
+	MPI2_CONFIG_PAGE_HEADER Header;		/* 00h */
+	__le32	Reserved1;			/* 04h */
+	u8	Reserved2;			/* 08h */
+	u8	EEDPTagMode;			/* 09h */
+	u8	Reserved3;			/* 0Ah */
+	u8	Reserved4;			/* 0Bh */
+	__le32	Reserved5[8];			/* 0Ch-2Ch */
+	u16	AddlFlags2;			/* 2Ch */
+	u8	AddlFlags3;			/* 2Eh */
+	u8	Reserved6;			/* 2Fh */
+	__le32	Reserved7[7];			/* 30h - 4Bh */
+	u8	NVMeAbortTO;			/* 4Ch */
+	u8	NumPerDevEvents;		/* 4Dh */
+	u8	HostTraceBufferDecrementSizeKB;	/* 4Eh */
+	u8	HostTraceBufferFlags;		/* 4Fh */
+	u16	HostTraceBufferMaxSizeKB;	/* 50h */
+	u16	HostTraceBufferMinSizeKB;	/* 52h */
+	u8	CoreDumpTOSec;			/* 54h */
+	u8	TimeSyncInterval;		/* 55h */
+	u16	Reserved9;			/* 56h */
+	__le32	Reserved10;			/* 58h */
+};
+
+/**
+ * struct MPT3SAS_TARGET - starget private hostdata
+ * @starget: starget object
+ * @sas_address: target sas address
+ * @raid_device: raid_device pointer to access volume data
+ * @handle: device handle
+ * @num_luns: number luns
+ * @flags: MPT_TARGET_FLAGS_XXX flags
+ * @deleted: target flaged for deletion
+ * @tm_busy: target is busy with TM request.
+ * @port: hba port entry containing target's port number info
+ * @sas_dev: The sas_device associated with this target
+ * @pcie_dev: The pcie device associated with this target
+ */
+struct MPT3SAS_TARGET {
+	struct scsi_target *starget;
+	u64	sas_address;
+	struct _raid_device *raid_device;
+	u16	handle;
+	int	num_luns;
+	u32	flags;
+	u8	deleted;
+	u8	tm_busy;
+	struct hba_port *port;
+	struct _sas_device *sas_dev;
+	struct _pcie_device *pcie_dev;
+};
+
+
+/*
+ * per device private data
+ */
+#define MPT_DEVICE_FLAGS_INIT		0x01
+
+#define MFG_PAGE10_HIDE_SSDS_MASK	(0x00000003)
+#define MFG_PAGE10_HIDE_ALL_DISKS	(0x00)
+#define MFG_PAGE10_EXPOSE_ALL_DISKS	(0x01)
+#define MFG_PAGE10_HIDE_IF_VOL_PRESENT	(0x02)
+
+/**
+ * struct MPT3SAS_DEVICE - sdev private hostdata
+ * @sas_target: starget private hostdata
+ * @lun: lun number
+ * @flags: MPT_DEVICE_XXX flags
+ * @configured_lun: lun is configured
+ * @block: device is in SDEV_BLOCK state
+ * @tlr_snoop_check: flag used in determining whether to disable TLR
+ * @eedp_enable: eedp support enable bit
+ * @eedp_type: 0(type_1), 1(type_2), 2(type_3)
+ * @eedp_block_length: block size
+ * @ata_command_pending: SATL passthrough outstanding for device
+ */
+struct MPT3SAS_DEVICE {
+	struct MPT3SAS_TARGET *sas_target;
+	unsigned int	lun;
+	u32	flags;
+	u8	configured_lun;
+	u8	block;
+	u8	tlr_snoop_check;
+	u8	ignore_delay_remove;
+	/* Iopriority Command Handling */
+	u8	ncq_prio_enable;
+	/*
+	 * Bug workaround for SATL handling: the mpt2/3sas firmware
+	 * doesn't return BUSY or TASK_SET_FULL for subsequent
+	 * commands while a SATL pass through is in operation as the
+	 * spec requires, it simply does nothing with them until the
+	 * pass through completes, causing them possibly to timeout if
+	 * the passthrough is a long executing command (like format or
+	 * secure erase).  This variable allows us to do the right
+	 * thing while a SATL command is pending.
+	 */
+	unsigned long ata_command_pending;
+
+};
+
+#define MPT3_CMD_NOT_USED	0x8000	/* free */
+#define MPT3_CMD_COMPLETE	0x0001	/* completed */
+#define MPT3_CMD_PENDING	0x0002	/* pending */
+#define MPT3_CMD_REPLY_VALID	0x0004	/* reply is valid */
+#define MPT3_CMD_RESET		0x0008	/* host reset dropped the command */
+#define MPT3_CMD_COMPLETE_ASYNC 0x0010  /* tells whether cmd completes in same thread or not */
+
+/**
+ * struct _internal_cmd - internal commands struct
+ * @mutex: mutex
+ * @done: completion
+ * @reply: reply message pointer
+ * @sense: sense data
+ * @status: MPT3_CMD_XXX status
+ * @smid: system message id
+ */
+struct _internal_cmd {
+	struct mutex mutex;
+	struct completion done;
+	void	*reply;
+	void	*sense;
+	u16	status;
+	u16	smid;
+};
+
+
+
+/**
+ * struct _sas_device - attached device information
+ * @list: sas device list
+ * @starget: starget object
+ * @sas_address: device sas address
+ * @device_name: retrieved from the SAS IDENTIFY frame.
+ * @handle: device handle
+ * @sas_address_parent: sas address of parent expander or sas host
+ * @enclosure_handle: enclosure handle
+ * @enclosure_logical_id: enclosure logical identifier
+ * @volume_handle: volume handle (valid when hidden raid member)
+ * @volume_wwid: volume unique identifier
+ * @device_info: bitfield provides detailed info about the device
+ * @id: target id
+ * @channel: target channel
+ * @slot: number number
+ * @phy: phy identifier provided in sas device page 0
+ * @responding: used in _scsih_sas_device_mark_responding
+ * @fast_path: fast path feature enable bit
+ * @pfa_led_on: flag for PFA LED status
+ * @pend_sas_rphy_add: flag to check if device is in sas_rphy_add()
+ *	addition routine.
+ * @chassis_slot: chassis slot
+ * @is_chassis_slot_valid: chassis slot valid or not
+ * @port: hba port entry containing device's port number info
+ * @rphy: device's sas_rphy address used to identify this device structure in
+ *	target_alloc callback function
+ */
+struct _sas_device {
+	struct list_head list;
+	struct scsi_target *starget;
+	u64	sas_address;
+	u64	device_name;
+	u16	handle;
+	u64	sas_address_parent;
+	u16	enclosure_handle;
+	u64	enclosure_logical_id;
+	u16	volume_handle;
+	u64	volume_wwid;
+	u32	device_info;
+	int	id;
+	int	channel;
+	u16	slot;
+	u8	phy;
+	u8	responding;
+	u8	fast_path;
+	u8	pfa_led_on;
+	u8	pend_sas_rphy_add;
+	u8	enclosure_level;
+	u8	chassis_slot;
+	u8	is_chassis_slot_valid;
+	u8	connector_name[5];
+	struct kref refcount;
+	u8	port_type;
+	struct hba_port *port;
+	struct sas_rphy *rphy;
+};
+
+static inline void sas_device_get(struct _sas_device *s)
+{
+	kref_get(&s->refcount);
+}
+
+static inline void sas_device_free(struct kref *r)
+{
+	kfree(container_of(r, struct _sas_device, refcount));
+}
+
+static inline void sas_device_put(struct _sas_device *s)
+{
+	kref_put(&s->refcount, sas_device_free);
+}
+
+/*
+ * struct _pcie_device - attached PCIe device information
+ * @list: pcie device list
+ * @starget: starget object
+ * @wwid: device WWID
+ * @handle: device handle
+ * @device_info: bitfield provides detailed info about the device
+ * @id: target id
+ * @channel: target channel
+ * @slot: slot number
+ * @port_num: port number
+ * @responding: used in _scsih_pcie_device_mark_responding
+ * @fast_path: fast path feature enable bit
+ * @nvme_mdts: MaximumDataTransferSize from PCIe Device Page 2 for
+ *		NVMe device only
+ * @enclosure_handle: enclosure handle
+ * @enclosure_logical_id: enclosure logical identifier
+ * @enclosure_level: The level of device's enclosure from the controller
+ * @connector_name: ASCII value of the Connector's name
+ * @serial_number: pointer of serial number string allocated runtime
+ * @access_status: Device's Access Status
+ * @shutdown_latency: NVMe device's RTD3 Entry Latency
+ * @refcount: reference count for deletion
+ */
+struct _pcie_device {
+	struct list_head list;
+	struct scsi_target *starget;
+	u64	wwid;
+	u16	handle;
+	u32	device_info;
+	int	id;
+	int	channel;
+	u16	slot;
+	u8	port_num;
+	u8	responding;
+	u8	fast_path;
+	u32	nvme_mdts;
+	u16	enclosure_handle;
+	u64	enclosure_logical_id;
+	u8	enclosure_level;
+	u8	connector_name[4];
+	u8	*serial_number;
+	u8	reset_timeout;
+	u8	access_status;
+	u16	shutdown_latency;
+	struct kref refcount;
+};
+/**
+ * pcie_device_get - Increment the pcie device reference count
+ *
+ * @p: pcie_device object
+ *
+ * When ever this function called it will increment the
+ * reference count of the pcie device for which this function called.
+ *
+ */
+static inline void pcie_device_get(struct _pcie_device *p)
+{
+	kref_get(&p->refcount);
+}
+
+/**
+ * pcie_device_free - Release the pcie device object
+ * @r - kref object
+ *
+ * Free's the pcie device object. It will be called when reference count
+ * reaches to zero.
+ */
+static inline void pcie_device_free(struct kref *r)
+{
+	kfree(container_of(r, struct _pcie_device, refcount));
+}
+
+/**
+ * pcie_device_put - Decrement the pcie device reference count
+ *
+ * @p: pcie_device object
+ *
+ * When ever this function called it will decrement the
+ * reference count of the pcie device for which this function called.
+ *
+ * When refernce count reaches to Zero, this will call pcie_device_free to the
+ * pcie_device object.
+ */
+static inline void pcie_device_put(struct _pcie_device *p)
+{
+	kref_put(&p->refcount, pcie_device_free);
+}
+/**
+ * struct _raid_device - raid volume link list
+ * @list: sas device list
+ * @starget: starget object
+ * @sdev: scsi device struct (volumes are single lun)
+ * @wwid: unique identifier for the volume
+ * @handle: device handle
+ * @block_size: Block size of the volume
+ * @id: target id
+ * @channel: target channel
+ * @volume_type: the raid level
+ * @device_info: bitfield provides detailed info about the hidden components
+ * @num_pds: number of hidden raid components
+ * @responding: used in _scsih_raid_device_mark_responding
+ * @percent_complete: resync percent complete
+ * @direct_io_enabled: Whether direct io to PDs are allowed or not
+ * @stripe_exponent: X where 2powX is the stripe sz in blocks
+ * @block_exponent: X where 2powX is the block sz in bytes
+ * @max_lba: Maximum number of LBA in the volume
+ * @stripe_sz: Stripe Size of the volume
+ * @device_info: Device info of the volume member disk
+ * @pd_handle: Array of handles of the physical drives for direct I/O in le16
+ */
+#define MPT_MAX_WARPDRIVE_PDS		8
+struct _raid_device {
+	struct list_head list;
+	struct scsi_target *starget;
+	struct scsi_device *sdev;
+	u64	wwid;
+	u16	handle;
+	u16	block_sz;
+	int	id;
+	int	channel;
+	u8	volume_type;
+	u8	num_pds;
+	u8	responding;
+	u8	percent_complete;
+	u8	direct_io_enabled;
+	u8	stripe_exponent;
+	u8	block_exponent;
+	u64	max_lba;
+	u32	stripe_sz;
+	u32	device_info;
+	u16	pd_handle[MPT_MAX_WARPDRIVE_PDS];
+};
+
+/**
+ * struct _boot_device - boot device info
+ *
+ * @channel: sas, raid, or pcie channel
+ * @device: holds pointer for struct _sas_device, struct _raid_device or
+ *     struct _pcie_device
+ */
+struct _boot_device {
+	int channel;
+	void *device;
+};
+
+/**
+ * struct _sas_port - wide/narrow sas port information
+ * @port_list: list of ports belonging to expander
+ * @num_phys: number of phys belonging to this port
+ * @remote_identify: attached device identification
+ * @rphy: sas transport rphy object
+ * @port: sas transport wide/narrow port object
+ * @hba_port: hba port entry containing port's port number info
+ * @phy_list: _sas_phy list objects belonging to this port
+ */
+struct _sas_port {
+	struct list_head port_list;
+	u8	num_phys;
+	struct sas_identify remote_identify;
+	struct sas_rphy *rphy;
+	struct sas_port *port;
+	struct hba_port *hba_port;
+	struct list_head phy_list;
+};
+
+/**
+ * struct _sas_phy - phy information
+ * @port_siblings: list of phys belonging to a port
+ * @identify: phy identification
+ * @remote_identify: attached device identification
+ * @phy: sas transport phy object
+ * @phy_id: unique phy id
+ * @handle: device handle for this phy
+ * @attached_handle: device handle for attached device
+ * @phy_belongs_to_port: port has been created for this phy
+ * @port: hba port entry containing port number info
+ */
+struct _sas_phy {
+	struct list_head port_siblings;
+	struct sas_identify identify;
+	struct sas_identify remote_identify;
+	struct sas_phy *phy;
+	u8	phy_id;
+	u16	handle;
+	u16	attached_handle;
+	u8	phy_belongs_to_port;
+	u8	hba_vphy;
+	struct hba_port *port;
+};
+
+/**
+ * struct _sas_node - sas_host/expander information
+ * @list: list of expanders
+ * @parent_dev: parent device class
+ * @num_phys: number phys belonging to this sas_host/expander
+ * @sas_address: sas address of this sas_host/expander
+ * @handle: handle for this sas_host/expander
+ * @sas_address_parent: sas address of parent expander or sas host
+ * @enclosure_handle: handle for this a member of an enclosure
+ * @device_info: bitwise defining capabilities of this sas_host/expander
+ * @responding: used in _scsih_expander_device_mark_responding
+ * @nr_phys_allocated: Allocated memory for this many count phys
+ * @phy: a list of phys that make up this sas_host/expander
+ * @sas_port_list: list of ports attached to this sas_host/expander
+ * @port: hba port entry containing node's port number info
+ * @rphy: sas_rphy object of this expander
+ */
+struct _sas_node {
+	struct list_head list;
+	struct device *parent_dev;
+	u8	num_phys;
+	u64	sas_address;
+	u16	handle;
+	u64	sas_address_parent;
+	u16	enclosure_handle;
+	u64	enclosure_logical_id;
+	u8	responding;
+	u8	nr_phys_allocated;
+	struct hba_port *port;
+	struct	_sas_phy *phy;
+	struct list_head sas_port_list;
+	struct sas_rphy *rphy;
+};
+
+/**
+ * struct _enclosure_node - enclosure information
+ * @list: list of enclosures
+ * @pg0: enclosure pg0;
+ */
+struct _enclosure_node {
+	struct list_head list;
+	Mpi2SasEnclosurePage0_t pg0;
+};
+
+/**
+ * enum reset_type - reset state
+ * @FORCE_BIG_HAMMER: issue diagnostic reset
+ * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
+ */
+enum reset_type {
+	FORCE_BIG_HAMMER,
+	SOFT_RESET,
+};
+
+/**
+ * struct pcie_sg_list - PCIe SGL buffer (contiguous per I/O)
+ * @pcie_sgl: PCIe native SGL for NVMe devices
+ * @pcie_sgl_dma: physical address
+ */
+struct pcie_sg_list {
+	void            *pcie_sgl;
+	dma_addr_t      pcie_sgl_dma;
+};
+
+/**
+ * struct chain_tracker - firmware chain tracker
+ * @chain_buffer: chain buffer
+ * @chain_buffer_dma: physical address
+ * @tracker_list: list of free request (ioc->free_chain_list)
+ */
+struct chain_tracker {
+	void *chain_buffer;
+	dma_addr_t chain_buffer_dma;
+};
+
+struct chain_lookup {
+	struct chain_tracker *chains_per_smid;
+	atomic_t	chain_offset;
+};
+
+/**
+ * struct scsiio_tracker - scsi mf request tracker
+ * @smid: system message id
+ * @cb_idx: callback index
+ * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
+ * @chain_list: list of associated firmware chain tracker
+ * @msix_io: IO's msix
+ */
+struct scsiio_tracker {
+	u16	smid;
+	struct scsi_cmnd *scmd;
+	u8	cb_idx;
+	u8	direct_io;
+	struct pcie_sg_list pcie_sg_list;
+	struct list_head chain_list;
+	u16     msix_io;
+};
+
+/**
+ * struct request_tracker - firmware request tracker
+ * @smid: system message id
+ * @cb_idx: callback index
+ * @tracker_list: list of free request (ioc->free_list)
+ */
+struct request_tracker {
+	u16	smid;
+	u8	cb_idx;
+	struct list_head tracker_list;
+};
+
+/**
+ * struct _tr_list - target reset list
+ * @handle: device handle
+ * @state: state machine
+ */
+struct _tr_list {
+	struct list_head list;
+	u16	handle;
+	u16	state;
+};
+
+/**
+ * struct _sc_list - delayed SAS_IO_UNIT_CONTROL message list
+ * @handle: device handle
+ */
+struct _sc_list {
+	struct list_head list;
+	u16     handle;
+};
+
+/**
+ * struct _event_ack_list - delayed event acknowledgment list
+ * @Event: Event ID
+ * @EventContext: used to track the event uniquely
+ */
+struct _event_ack_list {
+	struct list_head list;
+	U16     Event;
+	U32     EventContext;
+};
+
+/**
+ * struct adapter_reply_queue - the reply queue struct
+ * @ioc: per adapter object
+ * @msix_index: msix index into vector table
+ * @vector: irq vector
+ * @reply_post_host_index: head index in the pool where FW completes IO
+ * @reply_post_free: reply post base virt address
+ * @name: the name registered to request_irq()
+ * @busy: isr is actively processing replies on another cpu
+ * @os_irq: irq number
+ * @irqpoll: irq_poll object
+ * @irq_poll_scheduled: Tells whether irq poll is scheduled or not
+ * @is_iouring_poll_q: Tells whether reply queues is assigned
+ *			to io uring poll queues or not
+ * @list: this list
+*/
+struct adapter_reply_queue {
+	struct MPT3SAS_ADAPTER	*ioc;
+	u8			msix_index;
+	u32			reply_post_host_index;
+	Mpi2ReplyDescriptorsUnion_t *reply_post_free;
+	char			name[MPT_NAME_LENGTH];
+	atomic_t		busy;
+	u32			os_irq;
+	struct irq_poll         irqpoll;
+	bool			irq_poll_scheduled;
+	bool			irq_line_enable;
+	bool			is_iouring_poll_q;
+	struct list_head	list;
+};
+
+/**
+ * struct io_uring_poll_queue - the io uring poll queue structure
+ * @busy: Tells whether io uring poll queue is busy or not
+ * @pause: Tells whether IOs are paused on io uring poll queue or not
+ * @reply_q: reply queue mapped for io uring poll queue
+ */
+struct io_uring_poll_queue {
+	atomic_t	busy;
+	atomic_t	pause;
+	struct adapter_reply_queue *reply_q;
+};
+
+typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
+
+/* SAS3.0 support */
+typedef int (*MPT_BUILD_SG_SCMD)(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device);
+typedef void (*MPT_BUILD_SG)(struct MPT3SAS_ADAPTER *ioc, void *psge,
+		dma_addr_t data_out_dma, size_t data_out_sz,
+		dma_addr_t data_in_dma, size_t data_in_sz);
+typedef void (*MPT_BUILD_ZERO_LEN_SGE)(struct MPT3SAS_ADAPTER *ioc,
+		void *paddr);
+
+/* SAS3.5 support */
+typedef void (*NVME_BUILD_PRP)(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request,
+	dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma,
+	size_t data_in_sz);
+
+/* To support atomic and non atomic descriptors*/
+typedef void (*PUT_SMID_IO_FP_HIP) (struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 funcdep);
+typedef void (*PUT_SMID_DEFAULT) (struct MPT3SAS_ADAPTER *ioc, u16 smid);
+typedef u32 (*BASE_READ_REG) (const volatile void __iomem *addr);
+/*
+ * To get high iops reply queue's msix index when high iops mode is enabled
+ * else get the msix index of general reply queues.
+ */
+typedef u8 (*GET_MSIX_INDEX) (struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd);
+
+/* IOC Facts and Port Facts converted from little endian to cpu */
+union mpi3_version_union {
+	MPI2_VERSION_STRUCT		Struct;
+	u32				Word;
+};
+
+struct mpt3sas_facts {
+	u16			MsgVersion;
+	u16			HeaderVersion;
+	u8			IOCNumber;
+	u8			VP_ID;
+	u8			VF_ID;
+	u16			IOCExceptions;
+	u16			IOCStatus;
+	u32			IOCLogInfo;
+	u8			MaxChainDepth;
+	u8			WhoInit;
+	u8			NumberOfPorts;
+	u8			MaxMSIxVectors;
+	u16			RequestCredit;
+	u16			ProductID;
+	u32			IOCCapabilities;
+	union mpi3_version_union	FWVersion;
+	u16			IOCRequestFrameSize;
+	u16			IOCMaxChainSegmentSize;
+	u16			MaxInitiators;
+	u16			MaxTargets;
+	u16			MaxSasExpanders;
+	u16			MaxEnclosures;
+	u16			ProtocolFlags;
+	u16			HighPriorityCredit;
+	u16			MaxReplyDescriptorPostQueueDepth;
+	u8			ReplyFrameSize;
+	u8			MaxVolumes;
+	u16			MaxDevHandle;
+	u16			MaxPersistentEntries;
+	u16			MinDevHandle;
+	u8			CurrentHostPageSize;
+};
+
+struct mpt3sas_port_facts {
+	u8			PortNumber;
+	u8			VP_ID;
+	u8			VF_ID;
+	u8			PortType;
+	u16			MaxPostedCmdBuffers;
+};
+
+struct reply_post_struct {
+	Mpi2ReplyDescriptorsUnion_t	*reply_post_free;
+	dma_addr_t			reply_post_free_dma;
+};
+
+/**
+ * struct virtual_phy - vSES phy structure
+ * sas_address: SAS Address of vSES device
+ * phy_mask: vSES device's phy number
+ * flags: flags used to manage this structure
+ */
+struct virtual_phy {
+	struct	list_head list;
+	u64	sas_address;
+	u32	phy_mask;
+	u8	flags;
+};
+
+#define MPT_VPHY_FLAG_DIRTY_PHY	0x01
+
+/**
+ * struct hba_port - Saves each HBA's Wide/Narrow port info
+ * @sas_address: sas address of this wide/narrow port's attached device
+ * @phy_mask: HBA PHY's belonging to this port
+ * @port_id: port number
+ * @flags: hba port flags
+ * @vphys_mask : mask of vSES devices Phy number
+ * @vphys_list : list containing vSES device structures
+ */
+struct hba_port {
+	struct list_head list;
+	u64	sas_address;
+	u32	phy_mask;
+	u8      port_id;
+	u8	flags;
+	u32	vphys_mask;
+	struct list_head vphys_list;
+};
+
+/* hba port flags */
+#define HBA_PORT_FLAG_DIRTY_PORT       0x01
+#define HBA_PORT_FLAG_NEW_PORT         0x02
+
+#define MULTIPATH_DISABLED_PORT_ID     0xFF
+
+/**
+ * struct htb_rel_query - diagnostic buffer release reason
+ * @unique_id - unique id associated with this buffer.
+ * @buffer_rel_condition - Release condition ioctl/sysfs/reset
+ * @reserved
+ * @trigger_type - Master/Event/scsi/MPI
+ * @trigger_info_dwords - Data Correspondig to trigger type
+ */
+struct htb_rel_query {
+	u16	buffer_rel_condition;
+	u16	reserved;
+	u32	trigger_type;
+	u32	trigger_info_dwords[2];
+};
+
+/* Buffer_rel_condition bit fields */
+
+/* Bit 0 - Diag Buffer not Released */
+#define MPT3_DIAG_BUFFER_NOT_RELEASED	(0x00)
+/* Bit 0 - Diag Buffer Released */
+#define MPT3_DIAG_BUFFER_RELEASED	(0x01)
+
+/*
+ * Bit 1 - Diag Buffer Released by IOCTL,
+ * This bit is valid only if Bit 0 is one
+ */
+#define MPT3_DIAG_BUFFER_REL_IOCTL	(0x02 | MPT3_DIAG_BUFFER_RELEASED)
+
+/*
+ * Bit 2 - Diag Buffer Released by Trigger,
+ * This bit is valid only if Bit 0 is one
+ */
+#define MPT3_DIAG_BUFFER_REL_TRIGGER	(0x04 | MPT3_DIAG_BUFFER_RELEASED)
+
+/*
+ * Bit 3 - Diag Buffer Released by SysFs,
+ * This bit is valid only if Bit 0 is one
+ */
+#define MPT3_DIAG_BUFFER_REL_SYSFS	(0x08 | MPT3_DIAG_BUFFER_RELEASED)
+
+/* DIAG RESET Master trigger flags */
+#define MPT_DIAG_RESET_ISSUED_BY_DRIVER 0x00000000
+#define MPT_DIAG_RESET_ISSUED_BY_USER	0x00000001
+
+typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
+/**
+ * struct MPT3SAS_ADAPTER - per adapter struct
+ * @list: ioc_list
+ * @shost: shost object
+ * @id: unique adapter id
+ * @cpu_count: number online cpus
+ * @name: generic ioc string
+ * @tmp_string: tmp string used for logging
+ * @pdev: pci pdev object
+ * @pio_chip: physical io register space
+ * @chip: memory mapped register space
+ * @chip_phys: physical addrss prior to mapping
+ * @logging_level: see mpt3sas_debug.h
+ * @fwfault_debug: debuging FW timeouts
+ * @ir_firmware: IR firmware present
+ * @bars: bitmask of BAR's that must be configured
+ * @mask_interrupts: ignore interrupt
+ * @pci_access_mutex: Mutex to synchronize ioctl, sysfs show path and
+ *			pci resource handling
+ * @fault_reset_work_q_name: fw fault work queue
+ * @fault_reset_work_q: ""
+ * @fault_reset_work: ""
+ * @firmware_event_name: fw event work queue
+ * @firmware_event_thread: ""
+ * @fw_event_lock:
+ * @fw_event_list: list of fw events
+ * @current_evet: current processing firmware event
+ * @fw_event_cleanup: set to one while cleaning up the fw events
+ * @aen_event_read_flag: event log was read
+ * @broadcast_aen_busy: broadcast aen waiting to be serviced
+ * @shost_recovery: host reset in progress
+ * @ioc_reset_in_progress_lock:
+ * @ioc_link_reset_in_progress: phy/hard reset in progress
+ * @ignore_loginfos: ignore loginfos during task management
+ * @remove_host: flag for when driver unloads, to avoid sending dev resets
+ * @pci_error_recovery: flag to prevent ioc access until slot reset completes
+ * @wait_for_discovery_to_complete: flag set at driver load time when
+ *                                               waiting on reporting devices
+ * @is_driver_loading: flag set at driver load time
+ * @port_enable_failed: flag set when port enable has failed
+ * @start_scan: flag set from scan_start callback, cleared from _mpt3sas_fw_work
+ * @start_scan_failed: means port enable failed, return's the ioc_status
+ * @msix_enable: flag indicating msix is enabled
+ * @msix_vector_count: number msix vectors
+ * @cpu_msix_table: table for mapping cpus to msix index
+ * @cpu_msix_table_sz: table size
+ * @total_io_cnt: Gives total IO count, used to load balance the interrupts
+ * @ioc_coredump_loop: will have non-zero value when FW is in CoreDump state
+ * @timestamp_update_count: Counter to fire timeSync command
+ * time_sync_interval: Time sync interval read from man page 11
+ * @high_iops_outstanding: used to load balance the interrupts
+ *				within high iops reply queues
+ * @msix_load_balance: Enables load balancing of interrupts across
+ * the multiple MSIXs
+ * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands
+ * @thresh_hold: Max number of reply descriptors processed
+ *				before updating Host Index
+ * @iopoll_q_start_index: starting index of io uring poll queues
+ *				in reply queue list
+ * @drv_internal_flags: Bit map internal to driver
+ * @drv_support_bitmap: driver's supported feature bit map
+ * @use_32bit_dma: Flag to use 32 bit consistent dma mask
+ * @scsi_io_cb_idx: shost generated commands
+ * @tm_cb_idx: task management commands
+ * @scsih_cb_idx: scsih internal commands
+ * @transport_cb_idx: transport internal commands
+ * @ctl_cb_idx: clt internal commands
+ * @base_cb_idx: base internal commands
+ * @config_cb_idx: base internal commands
+ * @tm_tr_cb_idx : device removal target reset handshake
+ * @tm_tr_volume_cb_idx : volume removal target reset
+ * @base_cmds:
+ * @transport_cmds:
+ * @scsih_cmds:
+ * @tm_cmds:
+ * @ctl_cmds:
+ * @config_cmds:
+ * @base_add_sg_single: handler for either 32/64 bit sgl's
+ * @event_type: bits indicating which events to log
+ * @event_context: unique id for each logged event
+ * @event_log: event log pointer
+ * @event_masks: events that are masked
+ * @max_shutdown_latency: timeout value for NVMe shutdown operation,
+ *			which is equal that NVMe drive's RTD3 Entry Latency
+ *			which has reported maximum RTD3 Entry Latency value
+ *			among attached NVMe drives.
+ * @facts: static facts data
+ * @prev_fw_facts: previous fw facts data
+ * @pfacts: static port facts data
+ * @manu_pg0: static manufacturing page 0
+ * @manu_pg10: static manufacturing page 10
+ * @manu_pg11: static manufacturing page 11
+ * @bios_pg2: static bios page 2
+ * @bios_pg3: static bios page 3
+ * @ioc_pg8: static ioc page 8
+ * @iounit_pg0: static iounit page 0
+ * @iounit_pg1: static iounit page 1
+ * @iounit_pg8: static iounit page 8
+ * @sas_hba: sas host object
+ * @sas_expander_list: expander object list
+ * @enclosure_list: enclosure object list
+ * @sas_node_lock:
+ * @sas_device_list: sas device object list
+ * @sas_device_init_list: sas device object list (used only at init time)
+ * @sas_device_lock:
+ * @pcie_device_list: pcie device object list
+ * @pcie_device_init_list: pcie device object list (used only at init time)
+ * @pcie_device_lock:
+ * @io_missing_delay: time for IO completed by fw when PDR enabled
+ * @device_missing_delay: time for device missing by fw when PDR enabled
+ * @sas_id : used for setting volume target IDs
+ * @pcie_target_id: used for setting pcie target IDs
+ * @blocking_handles: bitmask used to identify which devices need blocking
+ * @pd_handles : bitmask for PD handles
+ * @pd_handles_sz : size of pd_handle bitmask
+ * @config_page_sz: config page size
+ * @config_page: reserve memory for config page payload
+ * @config_page_dma:
+ * @hba_queue_depth: hba request queue depth
+ * @sge_size: sg element size for either 32/64 bit
+ * @scsiio_depth: SCSI_IO queue depth
+ * @request_sz: per request frame size
+ * @request: pool of request frames
+ * @request_dma:
+ * @request_dma_sz:
+ * @scsi_lookup: firmware request tracker list
+ * @scsi_lookup_lock:
+ * @free_list: free list of request
+ * @pending_io_count:
+ * @reset_wq:
+ * @chain: pool of chains
+ * @chain_dma:
+ * @max_sges_in_main_message: number sg elements in main message
+ * @max_sges_in_chain_message: number sg elements per chain
+ * @chains_needed_per_io: max chains per io
+ * @chain_depth: total chains allocated
+ * @chain_segment_sz: gives the max number of
+ *			SGEs accommodate on single chain buffer
+ * @hi_priority_smid:
+ * @hi_priority:
+ * @hi_priority_dma:
+ * @hi_priority_depth:
+ * @hpr_lookup:
+ * @hpr_free_list:
+ * @internal_smid:
+ * @internal:
+ * @internal_dma:
+ * @internal_depth:
+ * @internal_lookup:
+ * @internal_free_list:
+ * @sense: pool of sense
+ * @sense_dma:
+ * @sense_dma_pool:
+ * @reply_depth: hba reply queue depth:
+ * @reply_sz: per reply frame size:
+ * @reply: pool of replys:
+ * @reply_dma:
+ * @reply_dma_pool:
+ * @reply_free_queue_depth: reply free depth
+ * @reply_free: pool for reply free queue (32 bit addr)
+ * @reply_free_dma:
+ * @reply_free_dma_pool:
+ * @reply_free_host_index: tail index in pool to insert free replys
+ * @reply_post_queue_depth: reply post queue depth
+ * @reply_post_struct: struct for reply_post_free physical & virt address
+ * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
+ * @rdpq_array_enable: rdpq_array support is enabled in the driver
+ * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
+ *				is assigned only ones
+ * @reply_queue_count: number of reply queue's
+ * @reply_queue_list: link list contaning the reply queue info
+ * @msix96_vector: 96 MSI-X vector support
+ * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue
+ * @delayed_tr_list: target reset link list
+ * @delayed_tr_volume_list: volume target reset link list
+ * @delayed_sc_list:
+ * @delayed_event_ack_list:
+ * @temp_sensors_count: flag to carry the number of temperature sensors
+ * @pci_access_mutex: Mutex to synchronize ioctl,sysfs show path and
+ *	pci resource handling. PCI resource freeing will lead to free
+ *	vital hardware/memory resource, which might be in use by cli/sysfs
+ *	path functions resulting in Null pointer reference followed by kernel
+ *	crash. To avoid the above race condition we use mutex syncrhonization
+ *	which ensures the syncrhonization between cli/sysfs_show path.
+ * @atomic_desc_capable: Atomic Request Descriptor support.
+ * @GET_MSIX_INDEX: Get the msix index of high iops queues.
+ * @multipath_on_hba: flag to determine multipath on hba is enabled or not
+ * @port_table_list: list containing HBA's wide/narrow port's info
+ */
+struct MPT3SAS_ADAPTER {
+	struct list_head list;
+	struct Scsi_Host *shost;
+	u8		id;
+	int		cpu_count;
+	char		name[MPT_NAME_LENGTH];
+	char		driver_name[MPT_NAME_LENGTH - 8];
+	char		tmp_string[MPT_STRING_LENGTH];
+	struct pci_dev	*pdev;
+	Mpi2SystemInterfaceRegs_t __iomem *chip;
+	phys_addr_t	chip_phys;
+	int		logging_level;
+	int		fwfault_debug;
+	u8		ir_firmware;
+	int		bars;
+	u8		mask_interrupts;
+
+	/* fw fault handler */
+	char		fault_reset_work_q_name[20];
+	struct workqueue_struct *fault_reset_work_q;
+	struct delayed_work fault_reset_work;
+
+	/* fw event handler */
+	char		firmware_event_name[20];
+	struct workqueue_struct	*firmware_event_thread;
+	spinlock_t	fw_event_lock;
+	struct list_head fw_event_list;
+	struct fw_event_work	*current_event;
+	u8		fw_events_cleanup;
+
+	 /* misc flags */
+	int		aen_event_read_flag;
+	u8		broadcast_aen_busy;
+	u16		broadcast_aen_pending;
+	u8		shost_recovery;
+	u8		got_task_abort_from_ioctl;
+
+	struct mutex	reset_in_progress_mutex;
+	spinlock_t	ioc_reset_in_progress_lock;
+	u8		ioc_link_reset_in_progress;
+
+	u8		ignore_loginfos;
+	u8		remove_host;
+	u8		pci_error_recovery;
+	u8		wait_for_discovery_to_complete;
+	u8		is_driver_loading;
+	u8		port_enable_failed;
+	u8		start_scan;
+	u16		start_scan_failed;
+
+	u8		msix_enable;
+	u16		msix_vector_count;
+	u8		*cpu_msix_table;
+	u16		cpu_msix_table_sz;
+	resource_size_t __iomem **reply_post_host_index;
+	u32		ioc_reset_count;
+	MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
+	u32             non_operational_loop;
+	u8              ioc_coredump_loop;
+	u32		timestamp_update_count;
+	u32		time_sync_interval;
+	atomic64_t      total_io_cnt;
+	atomic64_t	high_iops_outstanding;
+	bool            msix_load_balance;
+	u16		thresh_hold;
+	u8		high_iops_queues;
+	u8		iopoll_q_start_index;
+	u32             drv_internal_flags;
+	u32		drv_support_bitmap;
+	u32             dma_mask;
+	bool		enable_sdev_max_qd;
+	bool		use_32bit_dma;
+	struct io_uring_poll_queue *io_uring_poll_queues;
+
+	/* internal commands, callback index */
+	u8		scsi_io_cb_idx;
+	u8		tm_cb_idx;
+	u8		transport_cb_idx;
+	u8		scsih_cb_idx;
+	u8		ctl_cb_idx;
+	u8		base_cb_idx;
+	u8		port_enable_cb_idx;
+	u8		config_cb_idx;
+	u8		tm_tr_cb_idx;
+	u8		tm_tr_volume_cb_idx;
+	u8		tm_sas_control_cb_idx;
+	struct _internal_cmd base_cmds;
+	struct _internal_cmd port_enable_cmds;
+	struct _internal_cmd transport_cmds;
+	struct _internal_cmd scsih_cmds;
+	struct _internal_cmd tm_cmds;
+	struct _internal_cmd ctl_cmds;
+	struct _internal_cmd config_cmds;
+
+	MPT_ADD_SGE	base_add_sg_single;
+
+	/* function ptr for either IEEE or MPI sg elements */
+	MPT_BUILD_SG_SCMD build_sg_scmd;
+	MPT_BUILD_SG    build_sg;
+	MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge;
+	u16             sge_size_ieee;
+	u16		hba_mpi_version_belonged;
+
+	/* function ptr for MPI sg elements only */
+	MPT_BUILD_SG    build_sg_mpi;
+	MPT_BUILD_ZERO_LEN_SGE build_zero_len_sge_mpi;
+
+	/* function ptr for NVMe PRP elements only */
+	NVME_BUILD_PRP  build_nvme_prp;
+
+	/* event log */
+	u32		event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+	u32		event_context;
+	void		*event_log;
+	u32		event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+
+	u8		tm_custom_handling;
+	u8		nvme_abort_timeout;
+	u16		max_shutdown_latency;
+	u16		max_wideport_qd;
+	u16		max_narrowport_qd;
+	u16		max_nvme_qd;
+	u8		max_sata_qd;
+
+	/* static config pages */
+	struct mpt3sas_facts facts;
+	struct mpt3sas_facts prev_fw_facts;
+	struct mpt3sas_port_facts *pfacts;
+	Mpi2ManufacturingPage0_t manu_pg0;
+	struct Mpi2ManufacturingPage10_t manu_pg10;
+	struct Mpi2ManufacturingPage11_t manu_pg11;
+	Mpi2BiosPage2_t	bios_pg2;
+	Mpi2BiosPage3_t	bios_pg3;
+	Mpi2IOCPage8_t ioc_pg8;
+	Mpi2IOUnitPage0_t iounit_pg0;
+	Mpi2IOUnitPage1_t iounit_pg1;
+	Mpi2IOUnitPage8_t iounit_pg8;
+	Mpi2IOCPage1_t	ioc_pg1_copy;
+
+	struct _boot_device req_boot_device;
+	struct _boot_device req_alt_boot_device;
+	struct _boot_device current_boot_device;
+
+	/* sas hba, expander, and device list */
+	struct _sas_node sas_hba;
+	struct list_head sas_expander_list;
+	struct list_head enclosure_list;
+	spinlock_t	sas_node_lock;
+	struct list_head sas_device_list;
+	struct list_head sas_device_init_list;
+	spinlock_t	sas_device_lock;
+	struct list_head pcie_device_list;
+	struct list_head pcie_device_init_list;
+	spinlock_t      pcie_device_lock;
+
+	struct list_head raid_device_list;
+	spinlock_t	raid_device_lock;
+	u8		io_missing_delay;
+	u16		device_missing_delay;
+	int		sas_id;
+	int		pcie_target_id;
+
+	void		*blocking_handles;
+	void		*pd_handles;
+	u16		pd_handles_sz;
+
+	void		*pend_os_device_add;
+	u16		pend_os_device_add_sz;
+
+	/* config page */
+	u16		config_page_sz;
+	void		*config_page;
+	dma_addr_t	config_page_dma;
+	void		*config_vaddr;
+
+	/* scsiio request */
+	u16		hba_queue_depth;
+	u16		sge_size;
+	u16		scsiio_depth;
+	u16		request_sz;
+	u8		*request;
+	dma_addr_t	request_dma;
+	u32		request_dma_sz;
+	struct pcie_sg_list *pcie_sg_lookup;
+	spinlock_t	scsi_lookup_lock;
+	int		pending_io_count;
+	wait_queue_head_t reset_wq;
+	u16		*io_queue_num;
+
+	/* PCIe SGL */
+	struct dma_pool *pcie_sgl_dma_pool;
+	/* Host Page Size */
+	u32		page_size;
+
+	/* chain */
+	struct chain_lookup *chain_lookup;
+	struct list_head free_chain_list;
+	struct dma_pool *chain_dma_pool;
+	ulong		chain_pages;
+	u16		max_sges_in_main_message;
+	u16		max_sges_in_chain_message;
+	u16		chains_needed_per_io;
+	u32		chain_depth;
+	u16		chain_segment_sz;
+	u16		chains_per_prp_buffer;
+
+	/* hi-priority queue */
+	u16		hi_priority_smid;
+	u8		*hi_priority;
+	dma_addr_t	hi_priority_dma;
+	u16		hi_priority_depth;
+	struct request_tracker *hpr_lookup;
+	struct list_head hpr_free_list;
+
+	/* internal queue */
+	u16		internal_smid;
+	u8		*internal;
+	dma_addr_t	internal_dma;
+	u16		internal_depth;
+	struct request_tracker *internal_lookup;
+	struct list_head internal_free_list;
+
+	/* sense */
+	u8		*sense;
+	dma_addr_t	sense_dma;
+	struct dma_pool *sense_dma_pool;
+
+	/* reply */
+	u16		reply_sz;
+	u8		*reply;
+	dma_addr_t	reply_dma;
+	u32		reply_dma_max_address;
+	u32		reply_dma_min_address;
+	struct dma_pool *reply_dma_pool;
+
+	/* reply free queue */
+	u16		reply_free_queue_depth;
+	__le32		*reply_free;
+	dma_addr_t	reply_free_dma;
+	struct dma_pool *reply_free_dma_pool;
+	u32		reply_free_host_index;
+
+	/* reply post queue */
+	u16		reply_post_queue_depth;
+	struct reply_post_struct *reply_post;
+	u8		rdpq_array_capable;
+	u8		rdpq_array_enable;
+	u8		rdpq_array_enable_assigned;
+	struct dma_pool *reply_post_free_dma_pool;
+	struct dma_pool *reply_post_free_array_dma_pool;
+	Mpi2IOCInitRDPQArrayEntry *reply_post_free_array;
+	dma_addr_t reply_post_free_array_dma;
+	u8		reply_queue_count;
+	struct list_head reply_queue_list;
+
+	u8		combined_reply_queue;
+	u8		combined_reply_index_count;
+	u8		smp_affinity_enable;
+	/* reply post register index */
+	resource_size_t	__iomem **replyPostRegisterIndex;
+
+	struct list_head delayed_tr_list;
+	struct list_head delayed_tr_volume_list;
+	struct list_head delayed_sc_list;
+	struct list_head delayed_event_ack_list;
+	u8		temp_sensors_count;
+	struct mutex pci_access_mutex;
+
+	/* diag buffer support */
+	u8		*diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
+	dma_addr_t	diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT];
+	u8		diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		unique_id[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23];
+	u32		diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
+	u32		ring_buffer_offset;
+	u32		ring_buffer_sz;
+	struct htb_rel_query htb_rel;
+	u8 reset_from_user;
+	u8		is_warpdrive;
+	u8		is_mcpu_endpoint;
+	u8		hide_ir_msg;
+	u8		mfg_pg10_hide_flag;
+	u8		hide_drives;
+	spinlock_t	diag_trigger_lock;
+	u8		diag_trigger_active;
+	u8		atomic_desc_capable;
+	BASE_READ_REG	base_readl;
+	BASE_READ_REG	base_readl_ext_retry;
+	struct SL_WH_MASTER_TRIGGER_T diag_trigger_master;
+	struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event;
+	struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi;
+	struct SL_WH_MPI_TRIGGERS_T diag_trigger_mpi;
+	u8		supports_trigger_pages;
+	void		*device_remove_in_progress;
+	u16		device_remove_in_progress_sz;
+	u8		is_gen35_ioc;
+	u8		is_aero_ioc;
+	struct dentry	*debugfs_root;
+	struct dentry	*ioc_dump;
+	PUT_SMID_IO_FP_HIP put_smid_scsi_io;
+	PUT_SMID_IO_FP_HIP put_smid_fast_path;
+	PUT_SMID_IO_FP_HIP put_smid_hi_priority;
+	PUT_SMID_DEFAULT put_smid_default;
+	GET_MSIX_INDEX get_msix_index_for_smlio;
+
+	u8		multipath_on_hba;
+	struct list_head port_table_list;
+};
+
+struct mpt3sas_debugfs_buffer {
+	void	*buf;
+	u32	len;
+};
+
+#define MPT_DRV_SUPPORT_BITMAP_MEMMOVE 0x00000001
+#define MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY	0x00000002
+
+#define MPT_DRV_INTERNAL_FIRST_PE_ISSUED		0x00000001
+
+typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+
+/*
+ * struct ATTO_SAS_NVRAM - ATTO NVRAM settings stored
+ *				in Manufacturing page 1 used to get
+ *				ATTO SasAddr.
+ */
+struct ATTO_SAS_NVRAM {
+	u8		Signature[4];
+	u8		Version;
+#define ATTO_SASNVR_VERSION		0
+
+	u8		Checksum;
+#define ATTO_SASNVR_CKSUM_SEED	0x5A
+	u8		Pad[10];
+	u8		SasAddr[8];
+#define ATTO_SAS_ADDR_ALIGN		64
+	u8		Reserved[232];
+};
+
+#define ATTO_SAS_ADDR_DEVNAME_BIAS		63
+
+union ATTO_SAS_ADDRESS {
+	U8		b[8];
+	U16		w[4];
+	U32		d[2];
+	U64		q;
+};
+
+/* base shared API */
+extern struct list_head mpt3sas_ioc_list;
+extern char    driver_name[MPT_NAME_LENGTH];
+/* spinlock on list operations over IOCs
+ * Case: when multiple warpdrive cards(IOCs) are in use
+ * Each IOC will added to the ioc list structure on initialization.
+ * Watchdog threads run at regular intervals to check IOC for any
+ * fault conditions which will trigger the dead_ioc thread to
+ * deallocate pci resource, resulting deleting the IOC netry from list,
+ * this deletion need to protected by spinlock to enusre that
+ * ioc removal is syncrhonized, if not synchronized it might lead to
+ * list_del corruption as the ioc list is traversed in cli path.
+ */
+extern spinlock_t gioc_lock;
+
+void mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc);
+
+int mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc);
+int mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_free_enclosure_list(struct MPT3SAS_ADAPTER *ioc);
+int mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
+	enum reset_type type);
+
+void *mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void *mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+__le32 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc,
+	u16 smid);
+void *mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+dma_addr_t mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc, u8 poll);
+void mpt3sas_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc);
+
+void mpt3sas_base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 handle);
+void mpt3sas_base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u16 msix_task);
+void mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+/* hi-priority queue */
+u16 mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx);
+u16 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
+		struct scsi_cmnd *scmd);
+void mpt3sas_base_clear_st(struct MPT3SAS_ADAPTER *ioc,
+		struct scsiio_tracker *st);
+
+u16 mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx);
+void mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+void mpt3sas_base_initialize_callback_handler(void);
+u8 mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func);
+void mpt3sas_base_release_callback_handler(u8 cb_idx);
+
+u8 mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+u8 mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid,
+	u8 msix_index, u32 reply);
+void *mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc,
+	u32 phys_addr);
+
+u32 mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked);
+
+void mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code);
+#define mpt3sas_print_fault_code(ioc, fault_code) \
+do { pr_err("%s fault info from func: %s\n", ioc->name, __func__); \
+	mpt3sas_base_fault_info(ioc, fault_code); } while (0)
+
+void mpt3sas_base_coredump_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code);
+#define mpt3sas_print_coredump_info(ioc, fault_code) \
+do { pr_err("%s fault info from func: %s\n", ioc->name, __func__); \
+	mpt3sas_base_coredump_info(ioc, fault_code); } while (0)
+
+int mpt3sas_base_wait_for_coredump_completion(struct MPT3SAS_ADAPTER *ioc,
+		const char *caller);
+int mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SasIoUnitControlReply_t *mpi_reply,
+	Mpi2SasIoUnitControlRequest_t *mpi_request);
+int mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request);
+
+void mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc,
+	u32 *event_type);
+
+void mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc);
+
+void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
+	u16 device_missing_delay, u8 io_missing_delay);
+
+int mpt3sas_base_check_for_fault_and_issue_reset(
+	struct MPT3SAS_ADAPTER *ioc);
+
+int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc);
+
+void
+mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc);
+
+u8 mpt3sas_base_check_cmd_timeout(struct MPT3SAS_ADAPTER *ioc,
+	u8 status, void *mpi_request, int sz);
+#define mpt3sas_check_cmd_timeout(ioc, status, mpi_request, sz, issue_reset) \
+do {	ioc_err(ioc, "In func: %s\n", __func__); \
+	issue_reset = mpt3sas_base_check_cmd_timeout(ioc, \
+	status, mpi_request, sz); } while (0)
+
+int mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int wait_count);
+int mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type);
+void mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc);
+int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num);
+void mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc);
+
+/* scsih shared API */
+struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc,
+	u16 smid);
+u8 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
+	u32 reply);
+void mpt3sas_scsih_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_scsih_clear_outstanding_scsi_tm_commands(
+	struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_scsih_reset_done_handler(struct MPT3SAS_ADAPTER *ioc);
+
+int mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	uint channel, uint id, u64 lun, u8 type, u16 smid_task,
+	u16 msix_task, u8 timeout, u8 tr_method);
+int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	uint channel, uint id, u64 lun, u8 type, u16 smid_task,
+	u16 msix_task, u8 timeout, u8 tr_method);
+
+void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	struct hba_port *port);
+void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, struct hba_port *port);
+u8 mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc,
+	u16 smid);
+struct hba_port *
+mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port,
+	u8 bypass_dirty_port_flag);
+
+struct _sas_node *mpt3sas_scsih_expander_find_by_handle(
+	struct MPT3SAS_ADAPTER *ioc, u16 handle);
+struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address(
+	struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	struct hba_port *port);
+struct _sas_device *mpt3sas_get_sdev_by_addr(
+	 struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	 struct hba_port *port);
+struct _sas_device *__mpt3sas_get_sdev_by_addr(
+	 struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	 struct hba_port *port);
+struct _sas_device *mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle);
+struct _pcie_device *mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle);
+
+void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle);
+void mpt3sas_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
+struct _sas_device *
+__mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc, struct sas_rphy *rphy);
+struct virtual_phy *
+mpt3sas_get_vphy_by_phy(struct MPT3SAS_ADAPTER *ioc,
+	struct hba_port *port, u32 phy);
+
+/* config shared API */
+u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+int mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc,
+	u8 *num_phys);
+int mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
+int mpt3sas_config_get_manufacturing_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage1_t *config_page);
+
+int mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage10_t *config_page);
+
+int mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t  *config_page);
+int mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply,
+	struct Mpi2ManufacturingPage11_t *config_page);
+
+int mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2BiosPage2_t *config_page);
+int mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2BiosPage3_t *config_page);
+int mpt3sas_config_set_bios_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page,
+	int sz_config_page);
+int mpt3sas_config_get_bios_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage4_t *config_page,
+	int sz_config_page);
+int mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage0_t *config_page);
+int mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_pcie_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeIOUnitPage1_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
+int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage8_t *config_page);
+int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz);
+int mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
+	u16 sz);
+int mpt3sas_config_get_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOCPage1_t *config_page);
+int mpt3sas_config_set_ioc_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOCPage1_t *config_page);
+int mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOCPage8_t *config_page);
+int mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2ExpanderPage1_t *config_page,
+	u32 phy_number, u16 handle);
+int mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2SasEnclosurePage0_t *config_page,
+	u32 form, u32 handle);
+int mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number);
+int mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number);
+int mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
+	u32 handle);
+int mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle,
+	u8 *num_pds);
+int mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
+	u32 handle, u16 sz);
+int mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page,
+	u32 form, u32 form_specific);
+int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
+	u16 *volume_handle);
+int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc,
+	u16 volume_handle, u64 *wwid);
+int
+mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page);
+int
+mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page);
+int
+mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page);
+int
+mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page);
+int
+mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page);
+int
+mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set);
+int
+mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set);
+int
+mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set);
+int
+mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_MPI_TRIGGERS_T *mpi_tg, bool set);
+
+/* ctl shared API */
+extern const struct attribute_group *mpt3sas_host_groups[];
+extern const struct attribute_group *mpt3sas_dev_groups[];
+void mpt3sas_ctl_init(ushort hbas_to_enumerate);
+void mpt3sas_ctl_exit(ushort hbas_to_enumerate);
+u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_ctl_clear_outstanding_ioctls(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_ctl_reset_done_handler(struct MPT3SAS_ADAPTER *ioc);
+u8 mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc,
+	u8 msix_index, u32 reply);
+void mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventNotificationReply_t *mpi_reply);
+
+void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc,
+	u8 bits_to_register);
+int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
+	u8 *issue_reset);
+
+/* transport shared API */
+extern struct scsi_transport_template *mpt3sas_transport_template;
+u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+	u32 reply);
+struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc,
+	u16 handle, u64 sas_address, struct hba_port *port);
+void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
+	u64 sas_address_parent, struct hba_port *port);
+int mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy
+	*mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
+int mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_phy *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1,
+	struct device *parent_dev);
+void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
+	u64 sas_address, u16 handle, u8 phy_number, u8 link_rate,
+	struct hba_port *port);
+extern struct sas_function_template mpt3sas_transport_functions;
+extern struct scsi_transport_template *mpt3sas_transport_template;
+void
+mpt3sas_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy);
+void
+mpt3sas_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
+	struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy,
+	u64 sas_address, struct hba_port *port);
+/* trigger data externs */
+void mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data);
+void mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data);
+void mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc,
+	u32 trigger_bitmask);
+void mpt3sas_trigger_event(struct MPT3SAS_ADAPTER *ioc, u16 event,
+	u16 log_entry_qualifier);
+void mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key,
+	u8 asc, u8 ascq);
+void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status,
+	u32 loginfo);
+
+/* warpdrive APIs */
+u8 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device);
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	struct _raid_device *raid_device, Mpi25SCSIIORequest_t *mpi_request);
+
+/* NCQ Prio Handling Check */
+bool scsih_ncq_prio_supp(struct scsi_device *sdev);
+
+void mpt3sas_setup_debugfs(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_destroy_debugfs(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_init_debugfs(void);
+void mpt3sas_exit_debugfs(void);
+
+/**
+ * _scsih_is_pcie_scsi_device - determines if device is an pcie scsi device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Returns 1 if scsi device.
+ */
+static inline int
+mpt3sas_scsih_is_pcie_scsi_device(u32 device_info)
+{
+	if ((device_info &
+	    MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE) == MPI26_PCIE_DEVINFO_SCSI)
+		return 1;
+	else
+		return 0;
+}
+#endif /* MPT3SAS_BASE_H_INCLUDED */