Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 345 insertions, 0 deletions

diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
new file mode 100644
index 000000000..792c3e9c9
--- /dev/null
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * drivers/uio/uio_dmem_genirq.c
+ *
+ * Userspace I/O platform driver with generic IRQ handling code.
+ *
+ * Copyright (C) 2012 Damian Hobson-Garcia
+ *
+ * Based on uio_pdrv_genirq.c by Magnus Damm
+ */
+
+#include <linux/platform_device.h>
+#include <linux/uio_driver.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_data/uio_dmem_genirq.h>
+#include <linux/stringify.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#define DRIVER_NAME "uio_dmem_genirq"
+#define DMEM_MAP_ERROR (~0)
+
+struct uio_dmem_genirq_platdata {
+	struct uio_info *uioinfo;
+	spinlock_t lock;
+	unsigned long flags;
+	struct platform_device *pdev;
+	unsigned int dmem_region_start;
+	unsigned int num_dmem_regions;
+	void *dmem_region_vaddr[MAX_UIO_MAPS];
+	struct mutex alloc_lock;
+	unsigned int refcnt;
+};
+
+static int uio_dmem_genirq_open(struct uio_info *info, struct inode *inode)
+{
+	struct uio_dmem_genirq_platdata *priv = info->priv;
+	struct uio_mem *uiomem;
+	int dmem_region = priv->dmem_region_start;
+
+	uiomem = &priv->uioinfo->mem[priv->dmem_region_start];
+
+	mutex_lock(&priv->alloc_lock);
+	while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) {
+		void *addr;
+		if (!uiomem->size)
+			break;
+
+		addr = dma_alloc_coherent(&priv->pdev->dev, uiomem->size,
+				(dma_addr_t *)&uiomem->addr, GFP_KERNEL);
+		if (!addr) {
+			uiomem->addr = DMEM_MAP_ERROR;
+		}
+		priv->dmem_region_vaddr[dmem_region++] = addr;
+		++uiomem;
+	}
+	priv->refcnt++;
+
+	mutex_unlock(&priv->alloc_lock);
+	/* Wait until the Runtime PM code has woken up the device */
+	pm_runtime_get_sync(&priv->pdev->dev);
+	return 0;
+}
+
+static int uio_dmem_genirq_release(struct uio_info *info, struct inode *inode)
+{
+	struct uio_dmem_genirq_platdata *priv = info->priv;
+	struct uio_mem *uiomem;
+	int dmem_region = priv->dmem_region_start;
+
+	/* Tell the Runtime PM code that the device has become idle */
+	pm_runtime_put_sync(&priv->pdev->dev);
+
+	uiomem = &priv->uioinfo->mem[priv->dmem_region_start];
+
+	mutex_lock(&priv->alloc_lock);
+
+	priv->refcnt--;
+	while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) {
+		if (!uiomem->size)
+			break;
+		if (priv->dmem_region_vaddr[dmem_region]) {
+			dma_free_coherent(&priv->pdev->dev, uiomem->size,
+					priv->dmem_region_vaddr[dmem_region],
+					uiomem->addr);
+		}
+		uiomem->addr = DMEM_MAP_ERROR;
+		++dmem_region;
+		++uiomem;
+	}
+
+	mutex_unlock(&priv->alloc_lock);
+	return 0;
+}
+
+static irqreturn_t uio_dmem_genirq_handler(int irq, struct uio_info *dev_info)
+{
+	struct uio_dmem_genirq_platdata *priv = dev_info->priv;
+
+	/* Just disable the interrupt in the interrupt controller, and
+	 * remember the state so we can allow user space to enable it later.
+	 */
+
+	spin_lock(&priv->lock);
+	if (!test_and_set_bit(0, &priv->flags))
+		disable_irq_nosync(irq);
+	spin_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
+{
+	struct uio_dmem_genirq_platdata *priv = dev_info->priv;
+	unsigned long flags;
+
+	/* Allow user space to enable and disable the interrupt
+	 * in the interrupt controller, but keep track of the
+	 * state to prevent per-irq depth damage.
+	 *
+	 * Serialize this operation to support multiple tasks and concurrency
+	 * with irq handler on SMP systems.
+	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (irq_on) {
+		if (test_and_clear_bit(0, &priv->flags))
+			enable_irq(dev_info->irq);
+	} else {
+		if (!test_and_set_bit(0, &priv->flags))
+			disable_irq_nosync(dev_info->irq);
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static void uio_dmem_genirq_pm_disable(void *data)
+{
+	struct device *dev = data;
+
+	pm_runtime_disable(dev);
+}
+
+static int uio_dmem_genirq_probe(struct platform_device *pdev)
+{
+	struct uio_dmem_genirq_pdata *pdata = dev_get_platdata(&pdev->dev);
+	struct uio_info *uioinfo = &pdata->uioinfo;
+	struct uio_dmem_genirq_platdata *priv;
+	struct uio_mem *uiomem;
+	int ret = -EINVAL;
+	int i;
+
+	if (pdev->dev.of_node) {
+		/* alloc uioinfo for one device */
+		uioinfo = devm_kzalloc(&pdev->dev, sizeof(*uioinfo), GFP_KERNEL);
+		if (!uioinfo) {
+			dev_err(&pdev->dev, "unable to kmalloc\n");
+			return -ENOMEM;
+		}
+		uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOFn",
+					       pdev->dev.of_node);
+		uioinfo->version = "devicetree";
+	}
+
+	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
+		dev_err(&pdev->dev, "missing platform_data\n");
+		return -EINVAL;
+	}
+
+	if (uioinfo->handler || uioinfo->irqcontrol ||
+	    uioinfo->irq_flags & IRQF_SHARED) {
+		dev_err(&pdev->dev, "interrupt configuration error\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "unable to kmalloc\n");
+		return -ENOMEM;
+	}
+
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(&pdev->dev, "DMA enable failed\n");
+		return ret;
+	}
+
+	priv->uioinfo = uioinfo;
+	spin_lock_init(&priv->lock);
+	priv->flags = 0; /* interrupt is enabled to begin with */
+	priv->pdev = pdev;
+	mutex_init(&priv->alloc_lock);
+
+	if (!uioinfo->irq) {
+		/* Multiple IRQs are not supported */
+		ret = platform_get_irq(pdev, 0);
+		if (ret == -ENXIO && pdev->dev.of_node)
+			ret = UIO_IRQ_NONE;
+		else if (ret < 0)
+			return ret;
+		uioinfo->irq = ret;
+	}
+
+	if (uioinfo->irq) {
+		struct irq_data *irq_data = irq_get_irq_data(uioinfo->irq);
+
+		/*
+		 * If a level interrupt, dont do lazy disable. Otherwise the
+		 * irq will fire again since clearing of the actual cause, on
+		 * device level, is done in userspace
+		 * irqd_is_level_type() isn't used since isn't valid until
+		 * irq is configured.
+		 */
+		if (irq_data &&
+		    irqd_get_trigger_type(irq_data) & IRQ_TYPE_LEVEL_MASK) {
+			dev_dbg(&pdev->dev, "disable lazy unmask\n");
+			irq_set_status_flags(uioinfo->irq, IRQ_DISABLE_UNLAZY);
+		}
+	}
+
+	uiomem = &uioinfo->mem[0];
+
+	for (i = 0; i < pdev->num_resources; ++i) {
+		struct resource *r = &pdev->resource[i];
+
+		if (r->flags != IORESOURCE_MEM)
+			continue;
+
+		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+			dev_warn(&pdev->dev, "device has more than "
+					__stringify(MAX_UIO_MAPS)
+					" I/O memory resources.\n");
+			break;
+		}
+
+		uiomem->memtype = UIO_MEM_PHYS;
+		uiomem->addr = r->start;
+		uiomem->size = resource_size(r);
+		++uiomem;
+	}
+
+	priv->dmem_region_start = uiomem - &uioinfo->mem[0];
+	priv->num_dmem_regions = pdata->num_dynamic_regions;
+
+	for (i = 0; i < pdata->num_dynamic_regions; ++i) {
+		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+			dev_warn(&pdev->dev, "device has more than "
+					__stringify(MAX_UIO_MAPS)
+					" dynamic and fixed memory regions.\n");
+			break;
+		}
+		uiomem->memtype = UIO_MEM_PHYS;
+		uiomem->addr = DMEM_MAP_ERROR;
+		uiomem->size = pdata->dynamic_region_sizes[i];
+		++uiomem;
+	}
+
+	while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
+		uiomem->size = 0;
+		++uiomem;
+	}
+
+	/* This driver requires no hardware specific kernel code to handle
+	 * interrupts. Instead, the interrupt handler simply disables the
+	 * interrupt in the interrupt controller. User space is responsible
+	 * for performing hardware specific acknowledge and re-enabling of
+	 * the interrupt in the interrupt controller.
+	 *
+	 * Interrupt sharing is not supported.
+	 */
+
+	uioinfo->handler = uio_dmem_genirq_handler;
+	uioinfo->irqcontrol = uio_dmem_genirq_irqcontrol;
+	uioinfo->open = uio_dmem_genirq_open;
+	uioinfo->release = uio_dmem_genirq_release;
+	uioinfo->priv = priv;
+
+	/* Enable Runtime PM for this device:
+	 * The device starts in suspended state to allow the hardware to be
+	 * turned off by default. The Runtime PM bus code should power on the
+	 * hardware and enable clocks at open().
+	 */
+	pm_runtime_enable(&pdev->dev);
+
+	ret = devm_add_action_or_reset(&pdev->dev, uio_dmem_genirq_pm_disable, &pdev->dev);
+	if (ret)
+		return ret;
+
+	return devm_uio_register_device(&pdev->dev, priv->uioinfo);
+}
+
+static int uio_dmem_genirq_runtime_nop(struct device *dev)
+{
+	/* Runtime PM callback shared between ->runtime_suspend()
+	 * and ->runtime_resume(). Simply returns success.
+	 *
+	 * In this driver pm_runtime_get_sync() and pm_runtime_put_sync()
+	 * are used at open() and release() time. This allows the
+	 * Runtime PM code to turn off power to the device while the
+	 * device is unused, ie before open() and after release().
+	 *
+	 * This Runtime PM callback does not need to save or restore
+	 * any registers since user space is responsbile for hardware
+	 * register reinitialization after open().
+	 */
+	return 0;
+}
+
+static const struct dev_pm_ops uio_dmem_genirq_dev_pm_ops = {
+	.runtime_suspend = uio_dmem_genirq_runtime_nop,
+	.runtime_resume = uio_dmem_genirq_runtime_nop,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id uio_of_genirq_match[] = {
+	{ /* empty for now */ },
+};
+MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
+#endif
+
+static struct platform_driver uio_dmem_genirq = {
+	.probe = uio_dmem_genirq_probe,
+	.driver = {
+		.name = DRIVER_NAME,
+		.pm = &uio_dmem_genirq_dev_pm_ops,
+		.of_match_table = of_match_ptr(uio_of_genirq_match),
+	},
+};
+
+module_platform_driver(uio_dmem_genirq);
+
+MODULE_AUTHOR("Damian Hobson-Garcia");
+MODULE_DESCRIPTION("Userspace I/O platform driver with dynamic memory.");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);