Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 167 insertions, 0 deletions

diff --git a/drivers/video/fbdev/mmp/hw/mmp_spi.c b/drivers/video/fbdev/mmp/hw/mmp_spi.c
new file mode 100644
index 000000000..16401eb95
--- /dev/null
+++ b/drivers/video/fbdev/mmp/hw/mmp_spi.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * linux/drivers/video/mmp/hw/mmp_spi.c
+ * using the spi in LCD controler for commands send
+ *
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Authors:  Guoqing Li <ligq@marvell.com>
+ *          Lisa Du <cldu@marvell.com>
+ *          Zhou Zhu <zzhu3@marvell.com>
+ */
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include "mmp_ctrl.h"
+
+/**
+ * spi_write - write command to the SPI port
+ * @spi:  the SPI device.
+ * @data: can be 8/16/32-bit, MSB justified data to write.
+ *
+ * Wait bus transfer complete IRQ.
+ * The caller is expected to perform the necessary locking.
+ *
+ * Returns:
+ *   %-ETIMEDOUT	timeout occurred
+ *   0			success
+ */
+static inline int lcd_spi_write(struct spi_device *spi, u32 data)
+{
+	int timeout = 100000, isr, ret = 0;
+	u32 tmp;
+	void __iomem *reg_base = (void __iomem *)
+		*(void **)spi_master_get_devdata(spi->master);
+
+	/* clear ISR */
+	writel_relaxed(~SPI_IRQ_MASK, reg_base + SPU_IRQ_ISR);
+
+	switch (spi->bits_per_word) {
+	case 8:
+		writel_relaxed((u8)data, reg_base + LCD_SPU_SPI_TXDATA);
+		break;
+	case 16:
+		writel_relaxed((u16)data, reg_base + LCD_SPU_SPI_TXDATA);
+		break;
+	case 32:
+		writel_relaxed((u32)data, reg_base + LCD_SPU_SPI_TXDATA);
+		break;
+	default:
+		dev_err(&spi->dev, "Wrong spi bit length\n");
+	}
+
+	/* SPI start to send command */
+	tmp = readl_relaxed(reg_base + LCD_SPU_SPI_CTRL);
+	tmp &= ~CFG_SPI_START_MASK;
+	tmp |= CFG_SPI_START(1);
+	writel(tmp, reg_base + LCD_SPU_SPI_CTRL);
+
+	isr = readl_relaxed(reg_base + SPU_IRQ_ISR);
+	while (!(isr & SPI_IRQ_ENA_MASK)) {
+		udelay(100);
+		isr = readl_relaxed(reg_base + SPU_IRQ_ISR);
+		if (!--timeout) {
+			ret = -ETIMEDOUT;
+			dev_err(&spi->dev, "spi cmd send time out\n");
+			break;
+		}
+	}
+
+	tmp = readl_relaxed(reg_base + LCD_SPU_SPI_CTRL);
+	tmp &= ~CFG_SPI_START_MASK;
+	tmp |= CFG_SPI_START(0);
+	writel_relaxed(tmp, reg_base + LCD_SPU_SPI_CTRL);
+
+	writel_relaxed(~SPI_IRQ_MASK, reg_base + SPU_IRQ_ISR);
+
+	return ret;
+}
+
+static int lcd_spi_setup(struct spi_device *spi)
+{
+	void __iomem *reg_base = (void __iomem *)
+		*(void **)spi_master_get_devdata(spi->master);
+	u32 tmp;
+
+	tmp = CFG_SCLKCNT(16) |
+		CFG_TXBITS(spi->bits_per_word) |
+		CFG_SPI_SEL(1) | CFG_SPI_ENA(1) |
+		CFG_SPI_3W4WB(1);
+	writel(tmp, reg_base + LCD_SPU_SPI_CTRL);
+
+	/*
+	 * After set mode it need a time to pull up the spi singals,
+	 * or it would cause the wrong waveform when send spi command,
+	 * especially on pxa910h
+	 */
+	tmp = readl_relaxed(reg_base + SPU_IOPAD_CONTROL);
+	if ((tmp & CFG_IOPADMODE_MASK) != IOPAD_DUMB18SPI)
+		writel_relaxed(IOPAD_DUMB18SPI |
+			(tmp & ~CFG_IOPADMODE_MASK),
+			reg_base + SPU_IOPAD_CONTROL);
+	udelay(20);
+	return 0;
+}
+
+static int lcd_spi_one_transfer(struct spi_device *spi, struct spi_message *m)
+{
+	struct spi_transfer *t;
+	int i;
+
+	list_for_each_entry(t, &m->transfers, transfer_list) {
+		switch (spi->bits_per_word) {
+		case 8:
+			for (i = 0; i < t->len; i++)
+				lcd_spi_write(spi, ((u8 *)t->tx_buf)[i]);
+			break;
+		case 16:
+			for (i = 0; i < t->len/2; i++)
+				lcd_spi_write(spi, ((u16 *)t->tx_buf)[i]);
+			break;
+		case 32:
+			for (i = 0; i < t->len/4; i++)
+				lcd_spi_write(spi, ((u32 *)t->tx_buf)[i]);
+			break;
+		default:
+			dev_err(&spi->dev, "Wrong spi bit length\n");
+		}
+	}
+
+	m->status = 0;
+	if (m->complete)
+		m->complete(m->context);
+	return 0;
+}
+
+int lcd_spi_register(struct mmphw_ctrl *ctrl)
+{
+	struct spi_master *master;
+	void **p_regbase;
+	int err;
+
+	master = spi_alloc_master(ctrl->dev, sizeof(void *));
+	if (!master) {
+		dev_err(ctrl->dev, "unable to allocate SPI master\n");
+		return -ENOMEM;
+	}
+	p_regbase = spi_master_get_devdata(master);
+	*p_regbase = (void __force *)ctrl->reg_base;
+
+	/* set bus num to 5 to avoid conflict with other spi hosts */
+	master->bus_num = 5;
+	master->num_chipselect = 1;
+	master->setup = lcd_spi_setup;
+	master->transfer = lcd_spi_one_transfer;
+
+	err = spi_register_master(master);
+	if (err < 0) {
+		dev_err(ctrl->dev, "unable to register SPI master\n");
+		spi_master_put(master);
+		return err;
+	}
+
+	dev_info(&master->dev, "registered\n");
+
+	return 0;
+}