diff options
Diffstat (limited to 'Documentation/arm/memory.rst')
| -rw-r--r-- | Documentation/arm/memory.rst | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/Documentation/arm/memory.rst b/Documentation/arm/memory.rst new file mode 100644 index 000000000..0cb1e2938 --- /dev/null +++ b/Documentation/arm/memory.rst @@ -0,0 +1,103 @@ +================================= +Kernel Memory Layout on ARM Linux +================================= + + Russell King <rmk@arm.linux.org.uk> + + November 17, 2005 (2.6.15) + +This document describes the virtual memory layout which the Linux +kernel uses for ARM processors. It indicates which regions are +free for platforms to use, and which are used by generic code. + +The ARM CPU is capable of addressing a maximum of 4GB virtual memory +space, and this must be shared between user space processes, the +kernel, and hardware devices. + +As the ARM architecture matures, it becomes necessary to reserve +certain regions of VM space for use for new facilities; therefore +this document may reserve more VM space over time. + +=============== =============== =============================================== +Start End Use +=============== =============== =============================================== +ffff8000 ffffffff copy_user_page / clear_user_page use. + For SA11xx and Xscale, this is used to + setup a minicache mapping. + +ffff4000 ffffffff cache aliasing on ARMv6 and later CPUs. + +ffff1000 ffff7fff Reserved. + Platforms must not use this address range. + +ffff0000 ffff0fff CPU vector page. + The CPU vectors are mapped here if the + CPU supports vector relocation (control + register V bit.) + +fffe0000 fffeffff XScale cache flush area. This is used + in proc-xscale.S to flush the whole data + cache. (XScale does not have TCM.) + +fffe8000 fffeffff DTCM mapping area for platforms with + DTCM mounted inside the CPU. + +fffe0000 fffe7fff ITCM mapping area for platforms with + ITCM mounted inside the CPU. + +ffc80000 ffefffff Fixmap mapping region. Addresses provided + by fix_to_virt() will be located here. + +ffc00000 ffc7ffff Guard region + +ff800000 ffbfffff Permanent, fixed read-only mapping of the + firmware provided DT blob + +fee00000 feffffff Mapping of PCI I/O space. This is a static + mapping within the vmalloc space. + +VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space. + Memory returned by vmalloc/ioremap will + be dynamically placed in this region. + Machine specific static mappings are also + located here through iotable_init(). + VMALLOC_START is based upon the value + of the high_memory variable, and VMALLOC_END + is equal to 0xff800000. + +PAGE_OFFSET high_memory-1 Kernel direct-mapped RAM region. + This maps the platforms RAM, and typically + maps all platform RAM in a 1:1 relationship. + +PKMAP_BASE PAGE_OFFSET-1 Permanent kernel mappings + One way of mapping HIGHMEM pages into kernel + space. + +MODULES_VADDR MODULES_END-1 Kernel module space + Kernel modules inserted via insmod are + placed here using dynamic mappings. + +TASK_SIZE MODULES_VADDR-1 KASAn shadow memory when KASan is in use. + The range from MODULES_VADDR to the top + of the memory is shadowed here with 1 bit + per byte of memory. + +00001000 TASK_SIZE-1 User space mappings + Per-thread mappings are placed here via + the mmap() system call. + +00000000 00000fff CPU vector page / null pointer trap + CPUs which do not support vector remapping + place their vector page here. NULL pointer + dereferences by both the kernel and user + space are also caught via this mapping. +=============== =============== =============================================== + +Please note that mappings which collide with the above areas may result +in a non-bootable kernel, or may cause the kernel to (eventually) panic +at run time. + +Since future CPUs may impact the kernel mapping layout, user programs +must not access any memory which is not mapped inside their 0x0001000 +to TASK_SIZE address range. If they wish to access these areas, they +must set up their own mappings using open() and mmap(). |