diff options
Diffstat (limited to 'Documentation/devicetree/bindings/power')
112 files changed, 8745 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt new file mode 100644 index 000000000..a3571937b --- /dev/null +++ b/Documentation/devicetree/bindings/power/actions,owl-sps.txt @@ -0,0 +1,21 @@ +Actions Semi Owl Smart Power System (SPS) + +Required properties: +- compatible : "actions,s500-sps" for S500 + "actions,s700-sps" for S700 + "actions,s900-sps" for S900 +- reg : Offset and length of the register set for the device. +- #power-domain-cells : Must be 1. + See macros in: + include/dt-bindings/power/owl-s500-powergate.h for S500 + include/dt-bindings/power/owl-s700-powergate.h for S700 + include/dt-bindings/power/owl-s900-powergate.h for S900 + + +Example: + + sps: power-controller@b01b0100 { + compatible = "actions,s500-sps"; + reg = <0xb01b0100 0x100>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml new file mode 100644 index 000000000..43a932237 --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson Everything-Else Power Domains + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: |+ + The Everything-Else Power Domains node should be the child of a syscon + node with the required property: + + - compatible: Should be the following: + "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" + + Refer to the bindings described in + Documentation/devicetree/bindings/mfd/syscon.yaml + +properties: + compatible: + enum: + - amlogic,meson8-pwrc + - amlogic,meson8b-pwrc + - amlogic,meson8m2-pwrc + - amlogic,meson-gxbb-pwrc + - amlogic,meson-axg-pwrc + - amlogic,meson-g12a-pwrc + - amlogic,meson-sm1-pwrc + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: vpu + - const: vapb + + resets: + minItems: 5 + maxItems: 12 + + reset-names: + minItems: 5 + maxItems: 12 + + "#power-domain-cells": + const: 1 + + amlogic,ao-sysctrl: + description: phandle to the AO sysctrl node + $ref: /schemas/types.yaml#/definitions/phandle + +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson8b-pwrc + - amlogic,meson8m2-pwrc + then: + properties: + reset-names: + items: + - const: dblk + - const: pic_dc + - const: hdmi_apb + - const: hdmi_system + - const: venci + - const: vencp + - const: vdac + - const: vencl + - const: viu + - const: venc + - const: rdma + required: + - resets + - reset-names + + - if: + properties: + compatible: + enum: + - amlogic,meson-gxbb-pwrc + then: + properties: + reset-names: + items: + - const: viu + - const: venc + - const: vcbus + - const: bt656 + - const: dvin + - const: rdma + - const: venci + - const: vencp + - const: vdac + - const: vdi6 + - const: vencl + - const: vid_lock + required: + - resets + - reset-names + + - if: + properties: + compatible: + enum: + - amlogic,meson-axg-pwrc + then: + properties: + reset-names: + items: + - const: viu + - const: venc + - const: vcbus + - const: vencl + - const: vid_lock + required: + - resets + - reset-names + + - if: + properties: + compatible: + enum: + - amlogic,meson-g12a-pwrc + - amlogic,meson-sm1-pwrc + then: + properties: + reset-names: + items: + - const: viu + - const: venc + - const: vcbus + - const: bt656 + - const: rdma + - const: venci + - const: vencp + - const: vdac + - const: vdi6 + - const: vencl + - const: vid_lock + required: + - resets + - reset-names + +required: + - compatible + - clocks + - clock-names + - "#power-domain-cells" + - amlogic,ao-sysctrl + +additionalProperties: false + +examples: + - | + pwrc: power-controller { + compatible = "amlogic,meson-sm1-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&rti>; + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_bt656>, + <&reset_rdma>, + <&reset_venci>, + <&reset_vencp>, + <&reset_vdac>, + <&reset_vdi6>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "bt656", + "rdma", "venci", "vencp", "vdac", + "vdi6", "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; + }; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt new file mode 100644 index 000000000..99b5b10cd --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt @@ -0,0 +1,63 @@ +Amlogic Meson Power Controller +============================== + +The Amlogic Meson SoCs embeds an internal Power domain controller. + +VPU Power Domain +---------------- + +The Video Processing Unit power domain is controlled by this power controller, +but the domain requires some external resources to meet the correct power +sequences. +The bindings must respect the power domain bindings as described in the file +power-domain.yaml + +Device Tree Bindings: +--------------------- + +Required properties: +- compatible: should be one of the following : + - "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs + - "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs +- #power-domain-cells: should be 0 +- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node +- resets: phandles to the reset lines needed for this power demain sequence + as described in ../reset/reset.txt +- clocks: from common clock binding: handle to VPU and VAPB clocks +- clock-names: from common clock binding: must contain "vpu", "vapb" + corresponding to entry in the clocks property. + +Parent node should have the following properties : +- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" +- reg: base address and size of the AO system control register space. + +Example: +------- + +ao_sysctrl: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-gx-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&sysctrl>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + }; +}; + + diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml new file mode 100644 index 000000000..eab21bb20 --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +# Copyright (c) 2019 Amlogic, Inc +# Author: Jianxin Pan <jianxin.pan@amlogic.com> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson Secure Power Domains + +maintainers: + - Jianxin Pan <jianxin.pan@amlogic.com> + +description: |+ + Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node + of secure-monitor. + +properties: + compatible: + enum: + - amlogic,meson-a1-pwrc + - amlogic,meson-s4-pwrc + + "#power-domain-cells": + const: 1 + +required: + - compatible + - "#power-domain-cells" + +additionalProperties: false + +examples: + - | + secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,meson-a1-pwrc"; + #power-domain-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml new file mode 100644 index 000000000..94d369eb8 --- /dev/null +++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/apple,pmgr-pwrstate.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SoC PMGR Power States + +maintainers: + - Hector Martin <marcan@marcan.st> + +allOf: + - $ref: power-domain.yaml# + +description: | + Apple SoCs include PMGR blocks responsible for power management, + which can control various clocks, resets, power states, and + performance features. This binding describes the device power + state registers, which control power states and resets. + + Each instance of a power controller within the PMGR syscon node + represents a generic power domain provider, as documented in + Documentation/devicetree/bindings/power/power-domain.yaml. + The provider controls a single SoC block. The power hierarchy is + represented via power-domains relationships between these nodes. + + See Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml + for the top-level PMGR node documentation. + +properties: + compatible: + items: + - enum: + - apple,t8103-pmgr-pwrstate + - apple,t6000-pmgr-pwrstate + - const: apple,pmgr-pwrstate + + reg: + maxItems: 1 + + "#power-domain-cells": + const: 0 + + "#reset-cells": + const: 0 + + power-domains: + description: + Reference to parent power domains. A domain may have multiple parents, + and all will be powered up when it is powered. + minItems: 1 + maxItems: 8 # Arbitrary, should be enough + + label: + description: + Specifies the name of the SoC domain being controlled. This is used to + name the power/reset domains. + + apple,always-on: + description: + Forces this power domain to always be powered up. + type: boolean + + apple,min-state: + description: + Specifies the minimum power state for auto-PM. + 0 = power gated, 4 = clock gated, 15 = on. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + +required: + - compatible + - reg + - "#power-domain-cells" + - "#reset-cells" + - label + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml new file mode 100644 index 000000000..301db7daf --- /dev/null +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Core Power Reduction (CPR) bindings + +maintainers: + - Niklas Cassel <nks@flawful.org> + +description: | + CPR (Core Power Reduction) is a technology to reduce core power on a CPU + or other device. Each OPP of a device corresponds to a "corner" that has + a range of valid voltages for a particular frequency. While the device is + running at a particular frequency, CPR monitors dynamic factors such as + temperature, etc. and suggests adjustments to the voltage to save power + and meet silicon characteristic requirements. + +properties: + compatible: + items: + - enum: + - qcom,qcs404-cpr + - const: qcom,cpr + + reg: + description: Base address and size of the RBCPR register region. + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Reference clock. + + clock-names: + items: + - const: ref + + vdd-apc-supply: + description: APC regulator supply. + + '#power-domain-cells': + const: 0 + + operating-points-v2: + description: | + A phandle to the OPP table containing the performance states + supported by the CPR power domain. + + acc-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the syscon used for writing ACC settings. + + nvmem-cells: + items: + - description: Corner 1 quotient offset + - description: Corner 2 quotient offset + - description: Corner 3 quotient offset + - description: Corner 1 initial voltage + - description: Corner 2 initial voltage + - description: Corner 3 initial voltage + - description: Corner 1 quotient + - description: Corner 2 quotient + - description: Corner 3 quotient + - description: Corner 1 ring oscillator + - description: Corner 2 ring oscillator + - description: Corner 3 ring oscillator + - description: Fuse revision + + nvmem-cell-names: + items: + - const: cpr_quotient_offset1 + - const: cpr_quotient_offset2 + - const: cpr_quotient_offset3 + - const: cpr_init_voltage1 + - const: cpr_init_voltage2 + - const: cpr_init_voltage3 + - const: cpr_quotient1 + - const: cpr_quotient2 + - const: cpr_quotient3 + - const: cpr_ring_osc1 + - const: cpr_ring_osc2 + - const: cpr_ring_osc3 + - const: cpr_fuse_revision + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vdd-apc-supply + - '#power-domain-cells' + - operating-points-v2 + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cpr_opp_table: opp-table-cpr { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + + power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; + clocks = <&xo_board>; + clock-names = "ref"; + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + acc-syscon = <&tcsr>; + + nvmem-cells = <&cpr_efuse_quot_offset1>, + <&cpr_efuse_quot_offset2>, + <&cpr_efuse_quot_offset3>, + <&cpr_efuse_init_voltage1>, + <&cpr_efuse_init_voltage2>, + <&cpr_efuse_init_voltage3>, + <&cpr_efuse_quot1>, + <&cpr_efuse_quot2>, + <&cpr_efuse_quot3>, + <&cpr_efuse_ring1>, + <&cpr_efuse_ring2>, + <&cpr_efuse_ring3>, + <&cpr_efuse_revision>; + nvmem-cell-names = "cpr_quotient_offset1", + "cpr_quotient_offset2", + "cpr_quotient_offset3", + "cpr_init_voltage1", + "cpr_init_voltage2", + "cpr_init_voltage3", + "cpr_quotient1", + "cpr_quotient2", + "cpr_quotient3", + "cpr_ring_osc1", + "cpr_ring_osc2", + "cpr_ring_osc3", + "cpr_fuse_revision"; + }; diff --git a/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml new file mode 100644 index 000000000..f8e7ddbd2 --- /dev/null +++ b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom PMB (Power Management Bus) controller + +description: This document describes Broadcom's PMB controller. It supports + powering various types of connected devices (e.g. PCIe, USB, SATA). + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +properties: + compatible: + enum: + - brcm,bcm4908-pmb + - brcm,bcm63138-pmb + + reg: + description: register space of one or more buses + maxItems: 1 + + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: Flag to use for block working in big endian mode. + + "#power-domain-cells": + description: cell specifies device ID (see bcm-pmb.h) + const: 1 + +required: + - reg + - "#power-domain-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/bcm-pmb.h> + + pmb: power-controller@802800e0 { + compatible = "brcm,bcm4908-pmb"; + reg = <0x802800e0 0x40>; + #power-domain-cells = <1>; + }; + + foo { + power-domains = <&pmb BCM_PMB_PCIE0>; + }; diff --git a/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml new file mode 100644 index 000000000..d867bd697 --- /dev/null +++ b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM63xx power domain driver + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + +description: | + BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller + to enable/disable certain components in order to save power. + +properties: + compatible: + items: + - enum: + - brcm,bcm6318-power-controller + - brcm,bcm6328-power-controller + - brcm,bcm6362-power-controller + - brcm,bcm63268-power-controller + + reg: + maxItems: 1 + + "#power-domain-cells": + const: 1 + +required: + - compatible + - reg + - "#power-domain-cells" + +additionalProperties: false + +examples: + - | + periph_pwr: power-controller@10001848 { + compatible = "brcm,bcm6328-power-controller"; + reg = <0x10001848 0x4>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml new file mode 100644 index 000000000..4ee920a1d --- /dev/null +++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/domain-idle-state.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PM Domain Idle States binding description + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: + A domain idle state node represents the state parameters that will be used to + select the state when there are no active components in the PM domain. + +properties: + $nodename: + const: domain-idle-states + +patternProperties: + "^(cpu|cluster|domain)-": + type: object + additionalProperties: false + description: + Each state node represents a domain idle state description. + + properties: + compatible: + const: domain-idle-state + + entry-latency-us: + description: + The worst case latency in microseconds required to enter the idle + state. Note that, the exit-latency-us duration may be guaranteed only + after the entry-latency-us has passed. + + exit-latency-us: + description: + The worst case latency in microseconds required to exit the idle + state. + + min-residency-us: + description: + The minimum residency duration in microseconds after which the idle + state will yield power benefits, after overcoming the overhead while + entering the idle state. + + arm,psci-suspend-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + power_state parameter to pass to the ARM PSCI suspend call. + + Device tree nodes that require usage of PSCI CPU_SUSPEND function + (i.e. idle states node with entry-method property is set to "psci") + must specify this property. + + required: + - compatible + - entry-latency-us + - exit-latency-us + - min-residency-us + +additionalProperties: false + +examples: + - | + + domain-idle-states { + domain_retention: domain-retention { + compatible = "domain-idle-state"; + entry-latency-us = <20>; + exit-latency-us = <40>; + min-residency-us = <80>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml new file mode 100644 index 000000000..777e1d852 --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/fsl,imx-gpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX General Power Controller + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + The i.MX6 General Power Control (GPC) block contains DVFS load tracking + counters and Power Gating Control (PGC). + + The power domains are generic power domain providers as documented in + Documentation/devicetree/bindings/power/power-domain.yaml. They are + described as subnodes of the power gating controller 'pgc' node of the GPC. + + IP cores belonging to a power domain should contain a 'power-domains' + property that is a phandle pointing to the power domain the device belongs + to. + +properties: + compatible: + enum: + - fsl,imx6q-gpc + - fsl,imx6qp-gpc + - fsl,imx6sl-gpc + - fsl,imx6sx-gpc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipg + + pgc: + type: object + additionalProperties: false + description: list of power domains provided by this controller. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "power-domain@[0-9]$": + type: object + additionalProperties: false + + properties: + + '#power-domain-cells': + const: 0 + + reg: + description: | + The following DOMAIN_INDEX values are valid for i.MX6Q: + ARM_DOMAIN 0 + PU_DOMAIN 1 + The following additional DOMAIN_INDEX value is valid for i.MX6SL: + DISPLAY_DOMAIN 2 + The following additional DOMAIN_INDEX value is valid for i.MX6SX: + PCI_DOMAIN 3 + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing to ensure reset propagation into devices located + inside this power domain. + minItems: 1 + maxItems: 7 + + power-supply: true + + required: + - '#power-domain-cells' + - reg + + required: + - '#address-cells' + - '#size-cells' + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - pgc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpc@20dc000 { + compatible = "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml new file mode 100644 index 000000000..dfdb8dfb6 --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX General Power Controller v2 + +maintainers: + - Andrey Smirnov <andrew.smirnov@gmail.com> + +description: | + The i.MX7S/D General Power Control (GPC) block contains Power Gating + Control (PGC) for various power domains. + + Power domains contained within GPC node are generic power domain + providers, documented in + Documentation/devicetree/bindings/power/power-domain.yaml, which are + described as subnodes of the power gating controller 'pgc' node. + + IP cores belonging to a power domain should contain a 'power-domains' + property that is a phandle for PGC node representing the domain. + +properties: + compatible: + enum: + - fsl,imx7d-gpc + - fsl,imx8mn-gpc + - fsl,imx8mq-gpc + - fsl,imx8mm-gpc + - fsl,imx8mp-gpc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + '#interrupt-cells': + const: 3 + + pgc: + type: object + additionalProperties: false + description: list of power domains provided by this controller. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "power-domain@[0-9a-f]+$": + type: object + additionalProperties: false + + properties: + + '#power-domain-cells': + const: 0 + + reg: + description: | + Power domain index. Valid values are defined in + include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and + include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc + include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc + include/dt-bindings/power/imx8mp-power.h for fsl,imx8mp-gpc + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing to ensure reset propagation into devices located + inside this power domain. + minItems: 1 + maxItems: 5 + + power-supply: true + + power-domains: + maxItems: 1 + + resets: + description: | + A number of phandles to resets that need to be asserted during + power-up sequencing of the domain. The resets belong to devices + located inside the power domain, which need to be held in reset + across the power-up sequence. So no means to specify what each + reset is in a generic power-domain binding. + minItems: 1 + maxItems: 4 + + required: + - '#power-domain-cells' + - reg + + required: + - '#address-cells' + - '#size-cells' + +required: + - compatible + - reg + - interrupts + - pgc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpc@303a0000 { + compatible = "fsl,imx7d-gpc"; + reg = <0x303a0000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_mipi_phy: power-domain@0 { + #power-domain-cells = <0>; + reg = <0>; + power-supply = <®_1p0d>; + }; + + pgc_pcie_phy: power-domain@1 { + #power-domain-cells = <0>; + reg = <1>; + power-supply = <®_1p0d>; + }; + + pgc_hsic_phy: power-domain@2 { + #power-domain-cells = <0>; + reg = <2>; + power-supply = <®_1p2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml new file mode 100644 index 000000000..1f72b18ca --- /dev/null +++ b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Power domain bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + Power domain bindings based on SCU Message Protocol + +allOf: + - $ref: power-domain.yaml# + +properties: + compatible: + items: + - enum: + - fsl,imx8qm-scu-pd + - fsl,imx8qxp-scu-pd + - const: fsl,scu-pd + + '#power-domain-cells': + const: 1 + +required: + - compatible + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + power-controller { + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml new file mode 100644 index 000000000..605ec7ab5 --- /dev/null +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Power Domains Controller + +maintainers: + - MandyJH Liu <mandyjh.liu@mediatek.com> + - Matthias Brugger <mbrugger@suse.com> + +description: | + Mediatek processors include support for multiple power domains which can be + powered up/down by software based on different application scenes to save power. + + IP cores belonging to a power domain should contain a 'power-domains' + property that is a phandle for SCPSYS node representing the domain. + +properties: + $nodename: + pattern: '^power-controller(@[0-9a-f]+)?$' + + compatible: + enum: + - mediatek,mt6795-power-controller + - mediatek,mt8167-power-controller + - mediatek,mt8173-power-controller + - mediatek,mt8183-power-controller + - mediatek,mt8186-power-controller + - mediatek,mt8192-power-controller + - mediatek,mt8195-power-controller + + '#power-domain-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^power-domain@[0-9a-f]+$": + $ref: "#/$defs/power-domain-node" + patternProperties: + "^power-domain@[0-9a-f]+$": + $ref: "#/$defs/power-domain-node" + patternProperties: + "^power-domain@[0-9a-f]+$": + $ref: "#/$defs/power-domain-node" + patternProperties: + "^power-domain@[0-9a-f]+$": + $ref: "#/$defs/power-domain-node" + unevaluatedProperties: false + unevaluatedProperties: false + unevaluatedProperties: false + unevaluatedProperties: false + +$defs: + power-domain-node: + type: object + description: | + Represents the power domains within the power controller node as documented + in Documentation/devicetree/bindings/power/power-domain.yaml. + + properties: + + '#power-domain-cells': + description: + Must be 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + description: | + Power domain index. Valid values are defined in: + "include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain. + "include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain. + "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain. + "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain. + "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain. + "include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain. + maxItems: 1 + + clocks: + description: | + A number of phandles to clocks that need to be enabled during domain + power-up sequencing. + + clock-names: + description: | + List of names of clocks, in order to match the power-up sequencing + for each power domain we need to group the clocks by name. BASIC + clocks need to be enabled before enabling the corresponding power + domain, and should not have a '-' in their name (i.e mm, mfg, venc). + SUSBYS clocks need to be enabled before releasing the bus protection, + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0). + + In order to follow properly the power-up sequencing, the clocks must + be specified by order, adding first the BASIC clocks followed by the + SUSBSYS clocks. + + domain-supply: + description: domain regulator supply. + + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the device containing the INFRACFG register range. + + mediatek,smi: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the device containing the SMI register range. + + required: + - reg + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + scpsys: syscon@10006000 { + compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + + spm: power-controller { + compatible = "mediatek,mt8173-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domains of the SoC */ + power-domain@MT8173_POWER_DOMAIN_VDEC { + reg = <MT8173_POWER_DOMAIN_VDEC>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_VENC { + reg = <MT8173_POWER_DOMAIN_VENC>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "mm", "venc"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_ISP { + reg = <MT8173_POWER_DOMAIN_ISP>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_MM { + reg = <MT8173_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + power-domain@MT8173_POWER_DOMAIN_VENC_LT { + reg = <MT8173_POWER_DOMAIN_VENC_LT>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "mm", "venclt"; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_AUDIO { + reg = <MT8173_POWER_DOMAIN_AUDIO>; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_USB { + reg = <MT8173_POWER_DOMAIN_USB>; + #power-domain-cells = <0>; + }; + power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC { + reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>; + clocks = <&clk26m>; + clock-names = "mfg"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8173_POWER_DOMAIN_MFG_2D { + reg = <MT8173_POWER_DOMAIN_MFG_2D>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT8173_POWER_DOMAIN_MFG { + reg = <MT8173_POWER_DOMAIN_MFG>; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml new file mode 100644 index 000000000..be447ccfd --- /dev/null +++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/mti,mips-cpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPS Cluster Power Controller + +description: | + Defines a location of the MIPS Cluster Power Controller registers. + +maintainers: + - Paul Burton <paulburton@kernel.org> + +properties: + compatible: + const: mti,mips-cpc + + reg: + description: | + Base address and size of an unoccupied memory region, which will be + used to map the MIPS CPC registers block. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cpc@1bde0000 { + compatible = "mti,mips-cpc"; + reg = <0x1bde0000 0x8000>; + }; +... diff --git a/Documentation/devicetree/bindings/power/pd-samsung.yaml b/Documentation/devicetree/bindings/power/pd-samsung.yaml new file mode 100644 index 000000000..9c2c51133 --- /dev/null +++ b/Documentation/devicetree/bindings/power/pd-samsung.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/pd-samsung.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Power Domains + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: |+ + Exynos processors include support for multiple power domains which are used + to gate power to one or more peripherals on the processor. + +allOf: + - $ref: power-domain.yaml# + +properties: + compatible: + enum: + - samsung,exynos4210-pd + - samsung,exynos5433-pd + + reg: + maxItems: 1 + + clocks: + deprecated: true + maxItems: 1 + + clock-names: + deprecated: true + maxItems: 1 + + label: + description: + Human readable string with domain name. Will be visible in userspace + to let user to distinguish between multiple domains in SoC. + + "#power-domain-cells": + const: 0 + + power-domains: + maxItems: 1 + +required: + - compatible + - "#power-domain-cells" + - reg + +unevaluatedProperties: false + +examples: + - | + lcd0_pd: power-domain@10023c80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023c80 0x20>; + #power-domain-cells = <0>; + label = "LCD0"; + }; + + mfc_pd: power-domain@10044060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044060 0x20>; + #power-domain-cells = <0>; + label = "MFC"; + }; diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt new file mode 100644 index 000000000..e45affea8 --- /dev/null +++ b/Documentation/devicetree/bindings/power/power-controller.txt @@ -0,0 +1,17 @@ +* Generic system power control capability + +Power-management integrated circuits or miscellaneous hardware components are +sometimes able to control the system power. The device driver associated with these +components might need to define this capability, which tells the kernel that +it can be used to switch off the system. The corresponding device must have the +standard property "system-power-controller" in its device node. This property +marks the device as able to control the system power. In order to test if this +property is found programmatically, use the helper function +"of_device_is_system_power_controller" from of.h . + +Example: + +act8846: act8846@5 { + compatible = "active-semi,act8846"; + system-power-controller; +} diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml new file mode 100644 index 000000000..889091b98 --- /dev/null +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/power-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic PM domains + +maintainers: + - Rafael J. Wysocki <rjw@rjwysocki.net> + - Kevin Hilman <khilman@kernel.org> + - Ulf Hansson <ulf.hansson@linaro.org> + +description: |+ + System on chip designs are often divided into multiple PM domains that can be + used for power gating of selected IP blocks for power saving by reduced leakage + current. + + This device tree binding can be used to bind PM domain consumer devices with + their PM domains provided by PM domain providers. A PM domain provider can be + represented by any node in the device tree and can provide one or more PM + domains. A consumer node can refer to the provider by a phandle and a set of + phandle arguments (so called PM domain specifiers) of length specified by the + \#power-domain-cells property in the PM domain provider node. + +properties: + $nodename: + pattern: "^(power-controller|power-domain)([@-].*)?$" + + domain-idle-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: | + Phandles of idle states that defines the available states for the + power-domain provider. The idle state definitions are compatible with the + domain-idle-state bindings, specified in ./domain-idle-state.yaml. + + Note that, the domain-idle-state property reflects the idle states of this + PM domain and not the idle states of the devices or sub-domains in the PM + domain. Devices and sub-domains have their own idle states independent of + the parent domain's idle states. In the absence of this property, the + domain would be considered as capable of being powered-on or powered-off. + + operating-points-v2: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: + Phandles to the OPP tables of power domains provided by a power domain + provider. If the provider provides a single power domain only or all + the power domains provided by the provider have identical OPP tables, + then this shall contain a single phandle. Refer to ../opp/opp-v2-base.yaml + for more information. + + "#power-domain-cells": + description: + Number of cells in a PM domain specifier. Typically 0 for nodes + representing a single PM domain and 1 for nodes providing multiple PM + domains (e.g. power controllers), but can be any value as specified + by device tree binding documentation of particular provider. + + power-domains: + description: + A phandle and PM domain specifier as defined by bindings of the power + controller specified by phandle. Some power domains might be powered + from another power domain (or have other hardware specific + dependencies). For representing such dependency a standard PM domain + consumer binding is used. When provided, all domains created + by the given provider should be subdomains of the domain specified + by this binding. + +required: + - "#power-domain-cells" + +additionalProperties: true + +examples: + - | + power: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <1>; + }; + + // The node above defines a power controller that is a PM domain provider and + // expects one cell as its phandle argument. + + - | + parent2: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <1>; + }; + + child2: power-controller@12341000 { + compatible = "foo,power-controller"; + reg = <0x12341000 0x1000>; + power-domains = <&parent2 0>; + #power-domain-cells = <1>; + }; + + // The nodes above define two power controllers: 'parent' and 'child'. + // Domains created by the 'child' power controller are subdomains of '0' power + // domain provided by the 'parent' power controller. + + - | + parent3: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <0>; + domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>; + }; + + child3: power-controller@12341000 { + compatible = "foo,power-controller"; + reg = <0x12341000 0x1000>; + power-domains = <&parent3>; + #power-domain-cells = <0>; + domain-idle-states = <&DOMAIN_PWR_DN>; + }; + + domain-idle-states { + DOMAIN_RET: domain-retention { + compatible = "domain-idle-state"; + entry-latency-us = <1000>; + exit-latency-us = <2000>; + min-residency-us = <10000>; + }; + + DOMAIN_PWR_DN: domain-pwr-dn { + compatible = "domain-idle-state"; + entry-latency-us = <5000>; + exit-latency-us = <8000>; + min-residency-us = <7000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt new file mode 100644 index 000000000..08497ef26 --- /dev/null +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -0,0 +1,112 @@ +* Generic PM domains + +System on chip designs are often divided into multiple PM domains that can be +used for power gating of selected IP blocks for power saving by reduced leakage +current. + +This device tree binding can be used to bind PM domain consumer devices with +their PM domains provided by PM domain providers. A PM domain provider can be +represented by any node in the device tree and can provide one or more PM +domains. A consumer node can refer to the provider by a phandle and a set of +phandle arguments (so called PM domain specifiers) of length specified by the +#power-domain-cells property in the PM domain provider node. + +==PM domain providers== + +See power-domain.yaml. + +==PM domain consumers== + +Required properties: + - power-domains : A list of PM domain specifiers, as defined by bindings of + the power controller that is the PM domain provider. + +Optional properties: + - power-domain-names : A list of power domain name strings sorted in the same + order as the power-domains property. Consumers drivers will use + power-domain-names to match power domains with power-domains + specifiers. + +Example: + + leaky-device@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&power 0>; + power-domain-names = "io"; + }; + + leaky-device@12351000 { + compatible = "foo,i-leak-current"; + reg = <0x12351000 0x1000>; + power-domains = <&power 0>, <&power 1> ; + power-domain-names = "io", "clk"; + }; + +The first example above defines a typical PM domain consumer device, which is +located inside a PM domain with index 0 of a power controller represented by a +node with the label "power". +In the second example the consumer device are partitioned across two PM domains, +the first with index 0 and the second with index 1, of a power controller that +is represented by a node with the label "power". + +Optional properties: +- required-opps: This contains phandle to an OPP node in another device's OPP + table. It may contain an array of phandles, where each phandle points to an + OPP of a different device. It should not contain multiple phandles to the OPP + nodes in the same OPP table. This specifies the minimum required OPP of the + device(s), whose OPP's phandle is present in this property, for the + functioning of the current device at the current OPP (where this property is + present). + +Example: +- OPP table for domain provider that provides two domains. + + domain0_opp_table: opp-table0 { + compatible = "operating-points-v2"; + + domain0_opp_0: opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + }; + domain0_opp_1: opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + }; + }; + + domain1_opp_table: opp-table1 { + compatible = "operating-points-v2"; + + domain1_opp_0: opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <975000 970000 985000>; + }; + domain1_opp_1: opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1000000 980000 1010000>; + }; + }; + + power: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <1>; + operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>; + }; + + leaky-device0@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&power 0>; + required-opps = <&domain0_opp_0>; + }; + + leaky-device1@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&power 1>; + required-opps = <&domain1_opp_1>; + }; + +[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml new file mode 100644 index 000000000..5b4eda919 --- /dev/null +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -0,0 +1,192 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/qcom,rpmpd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPM/RPMh Power domains + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh + which then translates it into a corresponding voltage on a rail. + +properties: + compatible: + enum: + - qcom,mdm9607-rpmpd + - qcom,msm8226-rpmpd + - qcom,msm8909-rpmpd + - qcom,msm8916-rpmpd + - qcom,msm8939-rpmpd + - qcom,msm8953-rpmpd + - qcom,msm8976-rpmpd + - qcom,msm8994-rpmpd + - qcom,msm8996-rpmpd + - qcom,msm8998-rpmpd + - qcom,qcm2290-rpmpd + - qcom,qcs404-rpmpd + - qcom,sa8540p-rpmhpd + - qcom,sdm660-rpmpd + - qcom,sc7180-rpmhpd + - qcom,sc7280-rpmhpd + - qcom,sc8180x-rpmhpd + - qcom,sc8280xp-rpmhpd + - qcom,sdm845-rpmhpd + - qcom,sdx55-rpmhpd + - qcom,sdx65-rpmhpd + - qcom,sm6115-rpmpd + - qcom,sm6125-rpmpd + - qcom,sm6350-rpmhpd + - qcom,sm6375-rpmpd + - qcom,sm8150-rpmhpd + - qcom,sm8250-rpmhpd + - qcom,sm8350-rpmhpd + - qcom,sm8450-rpmhpd + + '#power-domain-cells': + const: 1 + + operating-points-v2: true + + opp-table: + type: object + +required: + - compatible + - '#power-domain-cells' + - operating-points-v2 + +additionalProperties: false + +examples: + - | + + // Example 1 (rpmh power domain controller and OPP table): + + #include <dt-bindings/power/qcom-rpmpd.h> + + rpmhpd: power-controller { + compatible = "qcom,sdm845-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + - | + + // Example 2 (rpm power domain controller and OPP table): + + rpmpd: power-controller { + compatible = "qcom,msm8996-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_low: opp1 { + opp-level = <1>; + }; + + rpmpd_opp_ret: opp2 { + opp-level = <2>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <3>; + }; + + rpmpd_opp_normal: opp4 { + opp-level = <4>; + }; + + rpmpd_opp_high: opp5 { + opp-level = <5>; + }; + + rpmpd_opp_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + + - | + + // Example 3 (Client/Consumer device using OPP table): + + leaky-device0@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&leaky_opp_table>; + }; + + leaky_opp_table: opp-table { + compatible = "operating-points-v2"; + opp1 { + opp-hz = /bits/ 64 <144000>; + required-opps = <&rpmhpd_opp_low>; + }; + + opp2 { + opp-hz = /bits/ 64 <400000>; + required-opps = <&rpmhpd_opp_ret>; + }; + + opp3 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp4 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_normal>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml new file mode 100644 index 000000000..f2cc89e7f --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/renesas,apmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Advanced Power Management Unit + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: + Renesas R-Car Gen2 and RZ/G1 SoCs utilize one or more APMU hardware units for + CPU core power domain control including SMP boot and CPU Hotplug. + +properties: + compatible: + items: + - enum: + - renesas,r8a7742-apmu # RZ/G1H + - renesas,r8a7743-apmu # RZ/G1M + - renesas,r8a7744-apmu # RZ/G1N + - renesas,r8a7745-apmu # RZ/G1E + - renesas,r8a77470-apmu # RZ/G1C + - renesas,r8a7790-apmu # R-Car H2 + - renesas,r8a7791-apmu # R-Car M2-W + - renesas,r8a7792-apmu # R-Car V2H + - renesas,r8a7793-apmu # R-Car M2-N + - renesas,r8a7794-apmu # R-Car E2 + - const: renesas,apmu + + reg: + maxItems: 1 + + cpus: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + minItems: 1 + maxItems: 4 + description: | + Array of phandles pointing to CPU cores, which should match the order of + CPU cores used by the WUPCR and PSTR registers in the Advanced Power + Management Unit section of the device's datasheet. + +required: + - compatible + - reg + - cpus + +additionalProperties: false + +examples: + - | + apmu@e6152000 { + compatible = "renesas,r8a7791-apmu", "renesas,apmu"; + reg = <0xe6152000 0x188>; + cpus = <&cpu0>, <&cpu1>; + }; diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml new file mode 100644 index 000000000..0720b5488 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car and RZ/G System Controller + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: | + The R-Car (RZ/G) System Controller provides power management for the CPU + cores and various coprocessors. + The power domain IDs for consumers are defined in header files:: + include/dt-bindings/power/r8*-sysc.h + +properties: + compatible: + enum: + - renesas,r8a7742-sysc # RZ/G1H + - renesas,r8a7743-sysc # RZ/G1M + - renesas,r8a7744-sysc # RZ/G1N + - renesas,r8a7745-sysc # RZ/G1E + - renesas,r8a77470-sysc # RZ/G1C + - renesas,r8a774a1-sysc # RZ/G2M + - renesas,r8a774b1-sysc # RZ/G2N + - renesas,r8a774c0-sysc # RZ/G2E + - renesas,r8a774e1-sysc # RZ/G2H + - renesas,r8a7779-sysc # R-Car H1 + - renesas,r8a7790-sysc # R-Car H2 + - renesas,r8a7791-sysc # R-Car M2-W + - renesas,r8a7792-sysc # R-Car V2H + - renesas,r8a7793-sysc # R-Car M2-N + - renesas,r8a7794-sysc # R-Car E2 + - renesas,r8a7795-sysc # R-Car H3 + - renesas,r8a77961-sysc # R-Car M3-W+ + - renesas,r8a77965-sysc # R-Car M3-N + - renesas,r8a7796-sysc # R-Car M3-W + - renesas,r8a77970-sysc # R-Car V3M + - renesas,r8a77980-sysc # R-Car V3H + - renesas,r8a77990-sysc # R-Car E3 + - renesas,r8a77995-sysc # R-Car D3 + - renesas,r8a779a0-sysc # R-Car V3U + - renesas,r8a779f0-sysc # R-Car S4-8 + - renesas,r8a779g0-sysc # R-Car V4H + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + // System Controller node + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7791-sysc"; + reg = <0xe6180000 0x0200>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml new file mode 100644 index 000000000..559718997 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/renesas,sysc-rmobile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Mobile System Controller + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Magnus Damm <magnus.damm@gmail.com> + +description: | + The R-Mobile System Controller provides the following functions: + - Boot mode management, + - Reset generation, + - Power management. + +properties: + compatible: + items: + - enum: + - renesas,sysc-r8a73a4 # R-Mobile APE6 + - renesas,sysc-r8a7740 # R-Mobile A1 + - renesas,sysc-sh73a0 # SH-Mobile AG5 + - const: renesas,sysc-rmobile # Generic SH/R-Mobile + + reg: + items: + - description: Normally accessible register block + - description: Register block protected by the HPB semaphore + + pm-domains: + type: object + description: | + This node contains a hierarchy of PM domain nodes, which should match the + Power Area Hierarchy in the Power Domain Specifications section of the + device's datasheet. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + additionalProperties: + $ref: "#/$defs/pd-node" + +required: + - compatible + - reg + - pm-domains + +additionalProperties: false + +$defs: + pd-node: + type: object + description: + PM domain node representing a PM domain. This node hould be named by + the real power area name, and thus its name should be unique. + + properties: + reg: + maxItems: 1 + description: + If the PM domain is not always-on, this property must contain the + bit index number for the corresponding power area in the various + Power Control and Status Registers. + If the PM domain is always-on, this property must be omitted. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#power-domain-cells': + const: 0 + + required: + - '#power-domain-cells' + + additionalProperties: + $ref: "#/$defs/pd-node" + +examples: + - | + // This shows a subset of the r8a7740 PM domain hierarchy, containing the + // C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP + // domain, which is a subdomain of A4S. + sysc: system-controller@e6180000 { + compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile"; + reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>; + + pm-domains { + pd_c5: c5 { + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a4s: a4s@10 { + reg = <10>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <0>; + + pd_a3sp: a3sp@11 { + reg = <11>; + #power-domain-cells = <0>; + }; + }; + + pd_a4su: a4su@20 { + reg = <20>; + #power-domain-cells = <0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/reset/axxia-reset.txt b/Documentation/devicetree/bindings/power/reset/axxia-reset.txt new file mode 100644 index 000000000..47e720d24 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/axxia-reset.txt @@ -0,0 +1,20 @@ +Axxia Restart Driver + +This driver can do reset of the Axxia SoC. It uses the registers in the syscon +block to initiate a chip reset. + +Required Properties: + -compatible: "lsi,axm55xx-reset" + -syscon: phandle to the syscon node. + +Example: + + syscon: syscon@2010030000 { + compatible = "lsi,axxia-syscon", "syscon"; + reg = <0x20 0x10030000 0 0x2000>; + }; + + reset: reset@2010031000 { + compatible = "lsi,axm55xx-reset"; + syscon = <&syscon>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt new file mode 100644 index 000000000..93f31ca1e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt @@ -0,0 +1,14 @@ +Broadcom Kona Family Reset Manager +---------------------------------- + +The reset manager is used on the Broadcom BCM21664 SoC. + +Required properties: + - compatible: brcm,bcm21664-resetmgr + - reg: memory address & range + +Example: + brcm,resetmgr@35001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x35001f00 0x24>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt new file mode 100644 index 000000000..7fec3e100 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt @@ -0,0 +1,17 @@ +* Device-Tree bindings for Cortina Systems Gemini Poweroff + +This is a special IP block in the Cortina Gemini SoC that only +deals with different ways to power the system down. + +Required properties: +- compatible: should be "cortina,gemini-power-controller" +- reg: should contain the physical memory base and size +- interrupts: should contain the power management interrupt + +Example: + +power-controller@4b000000 { + compatible = "cortina,gemini-power-controller"; + reg = <0x4b000000 0x100>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml new file mode 100644 index 000000000..45d66c775 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled power off + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: > + System power off support via a GPIO line. When a shutdown is + executed the operating system is expected to switch the GPIO + from inactive to active. After a delay (active-delay-ms) it + is expected to be switched back to inactive. After another + delay (inactive-delay-ms) it is configured as active again. + Finally the operating system assumes the power off failed if + the system is still running after waiting some time (timeout-ms). + +properties: + compatible: + const: gpio-poweroff + + gpios: + maxItems: 1 + + input: + type: boolean + description: > + Initially configure the GPIO line as an input. Only reconfigure + it to an output when the power-off sequence is initiated. If this optional + property is not specified, the GPIO is initialized as an output in its inactive state. + + active-delay-ms: + default: 100 + description: Delay to wait after driving gpio active + + inactive-delay-ms: + default: 100 + description: Delay to wait after driving gpio inactive + + timeout-ms: + default: 3000 + description: Time to wait before assuming the power off sequence failed. + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 4 0>; + timeout-ms = <3000>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml new file mode 100644 index 000000000..a72d5c721 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO controlled reset + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: > + Drive a GPIO line that can be used to restart the system from a restart handler. + + This binding supports level and edge triggered reset. At driver load time, the driver will + request the given gpio line and install a restart handler. If the optional properties + 'open-source' is not found, the GPIO line will be driven in the inactive state. Otherwise its + not driven until the restart is initiated. + + When the system is restarted, the restart handler will be invoked in priority order. The GPIO + is configured as an output, and driven active, triggering a level triggered reset condition. + This will also cause an inactive->active edge condition, triggering positive edge triggered + reset. After a delay specified by active-delay, the GPIO is set to inactive, thus causing an + active->inactive edge, triggering negative edge triggered reset. After a delay specified by + inactive-delay, the GPIO is driven active again. After a delay specified by wait-delay, the + restart handler completes allowing other restart handlers to be attempted. + +properties: + compatible: + const: gpio-restart + + gpios: + description: The GPIO to set high/low, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be low to reset the board + set it to "Active Low", otherwise set GPIO to "Active High". + + open-source: + $ref: /schemas/types.yaml#/definitions/flag + description: Treat the GPIO as being open source and defer driving it to when the restart is + initiated. If this optional property is not specified, the GPIO is initialized as an output + in its inactive state. + + priority: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + A priority ranging from 0 to 255 (default 129) according to the following guidelines: + + 0: Restart handler of last resort, with limited restart capabilities. + 128: Default restart handler; use if no other restart handler is expected to be available, + and/or if restart functionality is sufficient to restart the entire system. + 255: Highest priority restart handler, will preempt all other restart handlers. + minimum: 0 + maximum: 255 + default: 129 + + active-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Delay (default 100) to wait after driving gpio active [ms] + default: 100 + + inactive-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Delay (default 100) to wait after driving gpio inactive [ms] + default: 100 + + wait-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Delay (default 3000) to wait after completing restart sequence [ms] + default: 100 + +additionalProperties: false + +required: + - compatible + - gpios + +examples: + - | + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 4 0>; + priority = <128>; + active-delay = <100>; + inactive-delay = <100>; + wait-delay = <3000>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt new file mode 100644 index 000000000..c5c03789e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt @@ -0,0 +1,67 @@ +* Device tree bindings for Texas Instruments keystone reset + +This node is intended to allow SoC reset in case of software reset +of selected watchdogs. + +The Keystone SoCs can contain up to 4 watchdog timers to reset +SoC. Each watchdog timer event input is connected to the Reset Mux +block. The Reset Mux block can be configured to cause reset or not. + +Additionally soft or hard reset can be configured. + +Required properties: + +- compatible: ti,keystone-reset + +- ti,syscon-pll: phandle/offset pair. The phandle to syscon used to + access pll controller registers and the offset to use + reset control registers. + +- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to + access device state control registers and the offset + in order to use mux block registers for all watchdogs. + +Optional properties: + +- ti,soft-reset: Boolean option indicating soft reset. + By default hard reset is used. + +- ti,wdt-list: WDT list that can cause SoC reset. It's not related + to WDT driver, it's just needed to enable a SoC related + reset that's triggered by one of WDTs. The list is + in format: <0>, <2>; It can be in random order and + begins from 0 to 3, as keystone can contain up to 4 SoC + reset watchdogs and can be in random order. + +Example 1: +Setup keystone reset so that in case software reset or +WDT0 is triggered it issues hard reset for SoC. + +pllctrl: pll-controller@2310000 { + compatible = "ti,keystone-pllctrl", "syscon"; + reg = <0x02310000 0x200>; +}; + +devctrl: device-state-control@2620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; +}; + +rstctrl: reset-controller { + compatible = "ti,keystone-reset"; + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>; +}; + +Example 2: +Setup keystone reset so that in case of software reset or +WDT0 or WDT2 is triggered it issues soft reset for SoC. + +rstctrl: reset-controller { + compatible = "ti,keystone-reset"; + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>, <2>; + ti,soft-reset; +}; diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt new file mode 100644 index 000000000..38e54b3fd --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt @@ -0,0 +1,33 @@ +Binding for the LTC2952 PowerPath controller + +This chip is used to externally trigger a system shut down. Once the trigger has +been sent, the chip's watchdog has to be reset to gracefully shut down. +A full powerdown can be triggered via the kill signal. + +Required properties: + +- compatible: Must contain: "lltc,ltc2952" +- watchdog-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's watchdog line +- kill-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's kill line + +Optional properties: +- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's trigger line. If this property is not set, the + trigger function is ignored and the chip is kept alive + until an explicit kill signal is received +- trigger-delay-ms The number of milliseconds to wait after trigger line + assertion before executing shut down procedure. + The default is 2500ms. + +Example: + +ltc2952 { + compatible = "lltc,ltc2952"; + + trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + trigger-delay-ms = <2000>; + watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt new file mode 100644 index 000000000..933f0c48e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt @@ -0,0 +1,20 @@ +Device Tree Bindings for Power Controller on MediaTek PMIC + +The power controller which could be found on PMIC is responsible for externally +powering off or on the remote MediaTek SoC through the circuit BBPU. + +Required properties: +- compatible: Should be one of follows + "mediatek,mt6323-pwrc": for MT6323 PMIC + +Example: + + pmic { + compatible = "mediatek,mt6323"; + + ... + + power-controller { + compatible = "mediatek,mt6323-pwrc"; + }; + } diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt new file mode 100644 index 000000000..752d6126d --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt @@ -0,0 +1,26 @@ +NVMEM reboot mode driver + +This driver gets reboot mode magic value from reboot-mode driver +and stores it in a NVMEM cell named "reboot-mode". Then the bootloader +can read it and take different action according to the magic +value stored. + +Required properties: +- compatible: should be "nvmem-reboot-mode". +- nvmem-cells: A phandle to the reboot mode provided by a nvmem device. +- nvmem-cell-names: Should be "reboot-mode". + +The rest of the properties should follow the generic reboot-mode description +found in reboot-mode.txt + +Example: + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_mode>; + nvmem-cell-names = "reboot-mode"; + + mode-normal = <0xAAAA5501>; + mode-bootloader = <0xBBBB5500>; + mode-recovery = <0xCCCC5502>; + mode-test = <0xDDDD5503>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt new file mode 100644 index 000000000..c5de7b555 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt @@ -0,0 +1,19 @@ +Microsemi Ocelot reset controller + +The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the +SoC core. + +The reset registers are both present in the MSCC vcoreiii MIPS and +microchip Sparx5 armv8 SoC's. + +Required Properties: + + - compatible: "mscc,ocelot-chip-reset", "mscc,luton-chip-reset", + "mscc,jaguar2-chip-reset" or "microchip,sparx5-chip-reset" + +Example: + reset@1070008 { + compatible = "mscc,ocelot-chip-reset"; + reg = <0x1070008 0x4>; + }; + diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml new file mode 100644 index 000000000..0b1eca734 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PON Device + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: | + The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey + and resin along with the Android reboot-mode. + + This DT node has pwrkey and resin as sub nodes. + +properties: + compatible: + enum: + - qcom,pm8916-pon + - qcom,pms405-pon + - qcom,pm8998-pon + - qcom,pmk8350-pon + + reg: + description: | + Specifies the SPMI base address for the PON (power-on) peripheral. For + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS + peripherals. In that case, the PON_PBS address needs to be specified to + facilitate software debouncing on some PMIC. + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + maxItems: 2 + + pwrkey: + type: object + $ref: /schemas/input/qcom,pm8941-pwrkey.yaml# + + resin: + type: object + $ref: /schemas/input/qcom,pm8941-pwrkey.yaml# + + watchdog: + type: object + $ref: /schemas/watchdog/qcom,pm8916-wdt.yaml + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8916-pon + - qcom,pms405-pon + - qcom,pm8998-pon + then: + allOf: + - $ref: reboot-mode.yaml# + + properties: + reg: + maxItems: 1 + reg-names: + items: + - const: pon + - if: + properties: + compatible: + contains: + const: qcom,pmk8350-pon + then: + properties: + reg: + minItems: 1 + maxItems: 2 + reg-names: + minItems: 1 + items: + - const: hlos + - const: pbs + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/spmi/spmi.h> + spmi_bus: spmi@c440000 { + reg = <0x0c440000 0x1100>; + #address-cells = <2>; + #size-cells = <0>; + pmk8350: pmic@0 { + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + pmk8350_pon: pon_hlos@1300 { + reg = <0x1300>; + compatible = "qcom,pm8998-pon"; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml new file mode 100644 index 000000000..527962d54 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/qcom,pshold.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoC restart and power off + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + A power supply hold (ps-hold) bit is set to power the Qualcomm chipsets. + Clearing that bit allows us to restart/power off. The difference between + power off and restart is determined by unique power manager IC settings. + +properties: + compatible: + const: qcom,pshold + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + reset-controller@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt new file mode 100644 index 000000000..c363d7173 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt @@ -0,0 +1,15 @@ +* QNAP Power Off + +QNAP NAS devices have a microcontroller controlling the main power +supply. This microcontroller is connected to UART1 of the Kirkwood and +Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the +microcontroller to turn the power off. + +Synology NAS devices use a similar scheme, but a different baud rate, +9600, and a different character, '1'. + +Required Properties: +- compatible: Should be "qnap,power-off" or "synology,power-off" + +- reg: Address and length of the register set for UART1 +- clocks: tclk clock diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml new file mode 100644 index 000000000..ad0a0b95c --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic reboot mode core map + +maintainers: + - Andy Yan <andy.yan@rock-chips.com> + +description: | + This driver get reboot mode arguments and call the write + interface to store the magic value in special register + or ram. Then the bootloader can read it and take different + action according to the argument stored. + + All mode properties are vendor specific, it is a indication to tell + the bootloader what to do when the system reboots, and should be named + as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value). + + For example, modes common Android platform are: + - normal: Normal reboot mode, system reboot with command "reboot". + - recovery: Android Recovery mode, it is a mode to format the device or update a new image. + - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device. + - loader: A bootloader mode, it's a mode used to download image on Rockchip platform, + usually used in development. + +properties: + mode-normal: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Default value to set on a reboot if no command was provided. + +patternProperties: + "^mode-.*$": + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true + +examples: + - | + reboot-mode { + mode-normal = <0>; + mode-recovery = <1>; + mode-bootloader = <2>; + mode-loader = <3>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml new file mode 100644 index 000000000..e9417557c --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/regulator-poweroff.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Force-disable power regulator to turn the power off. + +maintainers: + - Michael Klein <michael@fossekall.de> + +description: | + When the power-off handler is called, a power regulator is disabled by + calling regulator_force_disable(). If the power is still on and the + CPU still running after a 3000ms delay, a warning is emitted. + +properties: + compatible: + const: regulator-poweroff + + cpu-supply: + description: + regulator to disable on power-down + +required: + - compatible + - cpu-supply + +additionalProperties: false + +examples: + - | + regulator-poweroff { + compatible = "regulator-poweroff"; + cpu-supply = <®_vcc1v2>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt b/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt new file mode 100644 index 000000000..5776e684a --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt @@ -0,0 +1,8 @@ +* Restart Power Off + +Buffalo Linkstation LS-XHL and LS-CHLv2, and other devices power off +by restarting and letting u-boot keep hold of the machine until the +user presses a button. + +Required Properties: +- compatible: Should be "restart-poweroff" diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt new file mode 100644 index 000000000..b63948737 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt @@ -0,0 +1,11 @@ +*Device-Tree bindings for ST SW reset functionality + +Required properties: +- compatible: should be "stih407-restart". +- st,syscfg: should be a phandle of the syscfg node. + +Example node: + restart { + compatible = "st,stih407-restart"; + st,syscfg = <&syscfg_sbc_reg>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml new file mode 100644 index 000000000..3412fe7e1 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/syscon-poweroff.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SYSCON mapped register poweroff driver + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: |+ + This is a generic poweroff driver using syscon to map the poweroff register. + The poweroff is generally performed with a write to the poweroff register + defined by the register map pointed by syscon reference plus the offset + with the value and mask defined in the poweroff node. + Default will be little endian mode, 32 bit access only. + +properties: + compatible: + const: syscon-poweroff + + mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Update only the register bits defined by the mask (32 bit). + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset in the register map for the poweroff register (in bytes). + + regmap: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the register map node. + + value: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The poweroff value written to the poweroff register (32 bit access). + +required: + - compatible + - regmap + - offset + +additionalProperties: false + +allOf: + - if: + not: + required: + - mask + then: + required: + - value + +examples: + - | + poweroff { + compatible = "syscon-poweroff"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x7a>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml new file mode 100644 index 000000000..9b1ffceef --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/syscon-reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SYSCON reboot mode driver + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + This driver gets reboot mode magic value from reboot-mode driver + and stores it in a SYSCON mapped register. Then the bootloader + can read it and take different action according to the magic + value stored. The SYSCON mapped register is retrieved from the + parental dt-node plus the offset. So the SYSCON reboot-mode node + should be represented as a sub-node of a "syscon", "simple-mfd" node. + +properties: + compatible: + const: syscon-reboot-mode + + mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Update only the register bits defined by the mask (32 bit) + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset in the register map for the mode register (in bytes) + +patternProperties: + "^mode-.+": + $ref: /schemas/types.yaml#/definitions/uint32 + description: Vendor-specific mode value written to the mode register + +additionalProperties: false + +required: + - compatible + - offset + +examples: + - | + #include <dt-bindings/soc/rockchip,boot-mode.h> + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x40>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-bootloader = <BOOT_FASTBOOT>; + mode-loader = <BOOT_BL_DOWNLOAD>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml new file mode 100644 index 000000000..da2509724 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/syscon-reboot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SYSCON mapped register reset driver + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: |+ + This is a generic reset driver using syscon to map the reset register. + The reset is generally performed with a write to the reset register + defined by the SYSCON register map base plus the offset with the value and + mask defined in the reboot node. Default will be little endian mode, 32 bit + access only. The SYSCON registers map is normally retrieved from the + parental dt-node. So the SYSCON reboot node should be represented as a + sub-node of a "syscon", "simple-mfd" node. Though the regmap property + pointing to the system controller node is also supported. + +properties: + compatible: + const: syscon-reboot + + mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Update only the register bits defined by the mask (32 bit). + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset in the register map for the reboot register (in bytes). + + regmap: + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + description: | + Phandle to the register map node. This property is deprecated in favor of + the syscon-reboot node been a child of a system controller node. + + value: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The reset value written to the reboot register (32 bit access). + +required: + - compatible + - offset + +additionalProperties: false + +allOf: + - if: + not: + required: + - mask + then: + required: + - value + +examples: + - | + reboot { + compatible = "syscon-reboot"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x1>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml new file mode 100644 index 000000000..46de35861 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/xlnx,zynqmp-power.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq MPSoC Power Management Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +description: | + The zynqmp-power node describes the power management configurations. + It will control remote suspend/shutdown interfaces. + +properties: + compatible: + const: xlnx,zynqmp-power + + interrupts: + maxItems: 1 + + mboxes: + description: | + Standard property to specify a Mailbox. Each value of + the mboxes property should contain a phandle to the + mailbox controller device node and an args specifier + that will be the phandle to the intended sub-mailbox + child node to be used for communication. See + Documentation/devicetree/bindings/mailbox/mailbox.txt + for more details about the generic mailbox controller + and client driver bindings. Also see + Documentation/devicetree/bindings/mailbox/ \ + xlnx,zynqmp-ipi-mailbox.txt for typical controller that + is used to communicate with this System controllers. + items: + - description: tx channel + - description: rx channel + + mbox-names: + description: + Name given to channels seen in the 'mboxes' property. + items: + - const: tx + - const: rx + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + - |+ + + // Example with interrupt method: + + firmware { + zynqmp-firmware { + zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupts = <0 35 4>; + }; + }; + }; + + - |+ + + // Example with IPI mailbox method: + + firmware { + zynqmp-firmware { + zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupt-parent = <&gic>; + interrupts = <0 35 4>; + mboxes = <&ipi_mailbox_pmu1 0>, + <&ipi_mailbox_pmu1 1>; + mbox-names = "tx", "rx"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml new file mode 100644 index 000000000..0d5e999a5 --- /dev/null +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml @@ -0,0 +1,254 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Power Domains + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + Rockchip processors include support for multiple power domains + which can be powered up/down by software based on different + application scenarios to save power. + + Power domains contained within power-controller node are + generic power domain providers documented in + Documentation/devicetree/bindings/power/power-domain.yaml. + + IP cores belonging to a power domain should contain a + "power-domains" property that is a phandle for the + power domain node representing the domain. + +properties: + $nodename: + const: power-controller + + compatible: + enum: + - rockchip,px30-power-controller + - rockchip,rk3036-power-controller + - rockchip,rk3066-power-controller + - rockchip,rk3128-power-controller + - rockchip,rk3188-power-controller + - rockchip,rk3228-power-controller + - rockchip,rk3288-power-controller + - rockchip,rk3328-power-controller + - rockchip,rk3366-power-controller + - rockchip,rk3368-power-controller + - rockchip,rk3399-power-controller + - rockchip,rk3568-power-controller + - rockchip,rk3588-power-controller + - rockchip,rv1126-power-controller + + "#power-domain-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - "#power-domain-cells" + +additionalProperties: false + +patternProperties: + "^power-domain@[0-9a-f]+$": + + $ref: "#/$defs/pd-node" + + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^power-domain@[0-9a-f]+$": + + $ref: "#/$defs/pd-node" + + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^power-domain@[0-9a-f]+$": + + $ref: "#/$defs/pd-node" + + unevaluatedProperties: false + + properties: + "#power-domain-cells": + const: 0 + +$defs: + pd-node: + type: object + description: | + Represents the power domains within the power controller node. + + properties: + reg: + maxItems: 1 + description: | + Power domain index. Valid values are defined in + "include/dt-bindings/power/px30-power.h" + "include/dt-bindings/power/rk3036-power.h" + "include/dt-bindings/power/rk3066-power.h" + "include/dt-bindings/power/rk3128-power.h" + "include/dt-bindings/power/rk3188-power.h" + "include/dt-bindings/power/rk3228-power.h" + "include/dt-bindings/power/rk3288-power.h" + "include/dt-bindings/power/rk3328-power.h" + "include/dt-bindings/power/rk3366-power.h" + "include/dt-bindings/power/rk3368-power.h" + "include/dt-bindings/power/rk3399-power.h" + "include/dt-bindings/power/rk3568-power.h" + "include/dt-bindings/power/rk3588-power.h" + "include/dt-bindings/power/rockchip,rv1126-power.h" + + clocks: + minItems: 1 + maxItems: 30 + description: | + A number of phandles to clocks that need to be enabled + while power domain switches state. + + pm_qos: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: | + A number of phandles to qos blocks which need to be saved and restored + while power domain switches state. + + "#power-domain-cells": + enum: [0, 1] + description: + Must be 0 for nodes representing a single PM domain and 1 for nodes + providing multiple PM domains. + + required: + - reg + - "#power-domain-cells" + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/power/rk3399-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + qos_hdcp: qos@ffa90000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa90000 0x0 0x20>; + }; + + qos_iep: qos@ffa98000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffa98000 0x0 0x20>; + }; + + qos_rga_r: qos@ffab0000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffab0000 0x0 0x20>; + }; + + qos_rga_w: qos@ffab0080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffab0080 0x0 0x20>; + }; + + qos_video_m0: qos@ffab8000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffab8000 0x0 0x20>; + }; + + qos_video_m1_r: qos@ffac0000 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffac0000 0x0 0x20>; + }; + + qos_video_m1_w: qos@ffac0080 { + compatible = "rockchip,rk3399-qos", "syscon"; + reg = <0x0 0xffac0080 0x0 0x20>; + }; + + power-management@ff310000 { + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff310000 0x0 0x1000>; + + power-controller { + compatible = "rockchip,rk3399-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_CENTER */ + power-domain@RK3399_PD_IEP { + reg = <RK3399_PD_IEP>; + clocks = <&cru ACLK_IEP>, + <&cru HCLK_IEP>; + pm_qos = <&qos_iep>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_RGA { + reg = <RK3399_PD_RGA>; + clocks = <&cru ACLK_RGA>, + <&cru HCLK_RGA>; + pm_qos = <&qos_rga_r>, + <&qos_rga_w>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VCODEC { + reg = <RK3399_PD_VCODEC>; + clocks = <&cru ACLK_VCODEC>, + <&cru HCLK_VCODEC>; + pm_qos = <&qos_video_m0>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VDU { + reg = <RK3399_PD_VDU>; + clocks = <&cru ACLK_VDU>, + <&cru HCLK_VDU>; + pm_qos = <&qos_video_m1_r>, + <&qos_video_m1_w>; + #power-domain-cells = <0>; + }; + power-domain@RK3399_PD_VIO { + reg = <RK3399_PD_VIO>; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3399_PD_HDCP { + reg = <RK3399_PD_HDCP>; + clocks = <&cru ACLK_HDCP>, + <&cru HCLK_HDCP>, + <&cru PCLK_HDCP>; + pm_qos = <&qos_hdcp>; + #power-domain-cells = <0>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml new file mode 100644 index 000000000..d71fc72d4 --- /dev/null +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml @@ -0,0 +1,390 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SRAM for IO Voltage Domains + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: | + IO domain voltages on some Rockchip SoCs are variable but need to be + kept in sync between the regulators and the SoC using a special + register. + + A specific example using rk3288 + If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then + bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to + that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1. + + Said another way, this driver simply handles keeping bits in the SoCs + General Register File (GRF) in sync with the actual value of a voltage + hooked up to the pins. + + Note that this driver specifically does not include + any logic for deciding what voltage we should set regulators to + any logic for deciding whether regulators (or internal SoC blocks) + should have power or not have power + + If there were some other software that had the smarts of making + decisions about regulators, it would work in conjunction with this + driver. When that other software adjusted a regulators voltage then + this driver would handle telling the SoC about it. A good example is + vqmmc for SD. In that case the dw_mmc driver simply is told about a + regulator. It changes the regulator between 3.3V and 1.8V at the + right time. This driver notices the change and makes sure that the + SoC is on the same page. + + You specify supplies using the standard regulator bindings by including + a phandle the relevant regulator. All specified supplies must be able + to report their voltage. The IO Voltage Domain for any non-specified + supplies will be not be touched. + +properties: + compatible: + enum: + - rockchip,px30-io-voltage-domain + - rockchip,px30-pmu-io-voltage-domain + - rockchip,rk3188-io-voltage-domain + - rockchip,rk3228-io-voltage-domain + - rockchip,rk3288-io-voltage-domain + - rockchip,rk3328-io-voltage-domain + - rockchip,rk3368-io-voltage-domain + - rockchip,rk3368-pmu-io-voltage-domain + - rockchip,rk3399-io-voltage-domain + - rockchip,rk3399-pmu-io-voltage-domain + - rockchip,rk3568-pmu-io-voltage-domain + - rockchip,rv1108-io-voltage-domain + - rockchip,rv1108-pmu-io-voltage-domain + - rockchip,rv1126-pmu-io-voltage-domain + +required: + - compatible + +unevaluatedProperties: false + +allOf: + - $ref: "#/$defs/px30" + - $ref: "#/$defs/px30-pmu" + - $ref: "#/$defs/rk3188" + - $ref: "#/$defs/rk3228" + - $ref: "#/$defs/rk3288" + - $ref: "#/$defs/rk3328" + - $ref: "#/$defs/rk3368" + - $ref: "#/$defs/rk3368-pmu" + - $ref: "#/$defs/rk3399" + - $ref: "#/$defs/rk3399-pmu" + - $ref: "#/$defs/rk3568-pmu" + - $ref: "#/$defs/rv1108" + - $ref: "#/$defs/rv1108-pmu" + - $ref: "#/$defs/rv1126-pmu" + +$defs: + px30: + if: + properties: + compatible: + contains: + const: rockchip,px30-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio-oscgpi-supply: + description: The supply connected to VCCIO_OSCGPI. + + px30-pmu: + if: + properties: + compatible: + contains: + const: rockchip,px30-pmu-io-voltage-domain + + then: + properties: + pmuio1-supply: + description: The supply connected to PMUIO1. + pmuio2-supply: + description: The supply connected to PMUIO2. + + rk3188: + if: + properties: + compatible: + contains: + const: rockchip,rk3188-io-voltage-domain + + then: + properties: + ap0-supply: + description: The supply connected to AP0_VCC. + ap1-supply: + description: The supply connected to AP1_VCC. + cif-supply: + description: The supply connected to CIF_VCC. + flash-supply: + description: The supply connected to FLASH_VCC. + lcdc0-supply: + description: The supply connected to LCD0_VCC. + lcdc1-supply: + description: The supply connected to LCD1_VCC. + vccio0-supply: + description: The supply connected to VCCIO0. + vccio1-supply: + description: The supply connected to VCCIO1. Also labeled as VCCIO2. + + rk3228: + if: + properties: + compatible: + contains: + const: rockchip,rk3228-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + + rk3288: + if: + properties: + compatible: + contains: + const: rockchip,rk3288-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO4_VDD. + bb-supply: + description: The supply connected to APIO5_VDD. + dvp-supply: + description: The supply connected to DVPIO_VDD. + flash0-supply: + description: The supply connected to FLASH0_VDD. Typically for eMMC. + flash1-supply: + description: The supply connected to FLASH1_VDD. Also known as SDIO1. + gpio30-supply: + description: The supply connected to APIO1_VDD. + gpio1830-supply: + description: The supply connected to APIO2_VDD. + lcdc-supply: + description: The supply connected to LCDC_VDD. + sdcard-supply: + description: The supply connected to SDMMC0_VDD. + wifi-supply: + description: The supply connected to APIO3_VDD. Also known as SDIO0. + + rk3328: + if: + properties: + compatible: + contains: + const: rockchip,rk3328-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + pmuio-supply: + description: The supply connected to VCCIO_PMU. + + rk3368: + if: + properties: + compatible: + contains: + const: rockchip,rk3368-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO3_VDD. + dvp-supply: + description: The supply connected to DVPIO_VDD. + flash0-supply: + description: The supply connected to FLASH0_VDD. Typically for eMMC. + gpio30-supply: + description: The supply connected to APIO1_VDD. + gpio1830-supply: + description: The supply connected to APIO4_VDD. + sdcard-supply: + description: The supply connected to SDMMC0_VDD. + wifi-supply: + description: The supply connected to APIO2_VDD. Also known as SDIO0. + + rk3368-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3368-pmu-io-voltage-domain + + then: + properties: + pmu-supply: + description: The supply connected to PMUIO_VDD. + vop-supply: + description: The supply connected to LCDC_VDD. + + rk3399: + if: + properties: + compatible: + contains: + const: rockchip,rk3399-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO5_VDD. + bt656-supply: + description: The supply connected to APIO2_VDD. + gpio1830-supply: + description: The supply connected to APIO4_VDD. + sdmmc-supply: + description: The supply connected to SDMMC0_VDD. + + rk3399-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3399-pmu-io-voltage-domain + + then: + properties: + pmu1830-supply: + description: The supply connected to PMUIO2_VDD. + + rk3568-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3568-pmu-io-voltage-domain + + then: + properties: + pmuio1-supply: + description: The supply connected to PMUIO1. + pmuio2-supply: + description: The supply connected to PMUIO2. + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio7-supply: + description: The supply connected to VCCIO7. + + rv1108: + if: + properties: + compatible: + contains: + const: rockchip,rv1108-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to APIO1_VDD. + vccio2-supply: + description: The supply connected to APIO2_VDD. + vccio3-supply: + description: The supply connected to APIO3_VDD. + vccio5-supply: + description: The supply connected to APIO5_VDD. + vccio6-supply: + description: The supply connected to APIO6_VDD. + + rv1108-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rv1108-pmu-io-voltage-domain + + then: + properties: + pmu-supply: + description: The supply connected to PMUIO_VDD. + + rv1126-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rv1126-pmu-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio7-supply: + description: The supply connected to VCCIO7. + pmuio0-supply: + description: The supply connected to PMUIO0. + pmuio1-supply: + description: The supply connected to PMUIO1. + +examples: + - | + io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + audio-supply = <&vcc18_codec>; + bb-supply = <&vcc33_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc18_flashio>; + gpio1830-supply = <&vcc33_io>; + gpio30-supply = <&vcc33_pmuio>; + lcdc-supply = <&vcc33_lcd>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc18_wl>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml new file mode 100644 index 000000000..5220d9cb1 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Active-semi ACT8945A Charger Function + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: active-semi,act8945a-charger + + interrupts: + maxItems: 1 + + active-semi,chglev-gpios: + maxItems: 1 + description: charge current level GPIO + + active-semi,lbo-gpios: + maxItems: 1 + description: low battery voltage detect GPIO + + active-semi,input-voltage-threshold-microvolt: + description: | + Specifies the charger's input over-voltage threshold value. + Despite the name, specified values are in millivolt (mV). + Defaults to 6.6 V + enum: [ 6600, 7000, 7500, 8000 ] + + active-semi,precondition-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the charger's PRECONDITION safety timer setting value in minutes. + If 0, it means to disable this timer. + Defaults to 40 minutes. + enum: [ 0, 40, 60, 80 ] + + active-semi,total-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specifies the charger's total safety timer setting value in hours; + If 0, it means to disable this timer; + Defaults to 3 hours. + enum: [ 0, 3, 4, 5 ] + +required: + - compatible + - interrupts + - active-semi,chglev-gpios + - active-semi,lbo-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + charger { + compatible = "active-semi,act8945a-charger"; + interrupt-parent = <&pioA>; + interrupts = <45 IRQ_TYPE_LEVEL_LOW>; + active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; + active-semi,input-voltage-threshold-microvolt = <6600>; + active-semi,precondition-timeout = <40>; + active-semi,total-timeout = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml new file mode 100644 index 000000000..491488e7b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery Characteristics + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + The devicetree battery node provides static battery characteristics. + In smart batteries, these are typically stored in non-volatile memory + on a fuel gauge chip. The battery node should be used where there is + no appropriate non-volatile memory, or it is unprogrammed/incorrect. + + Upstream dts files should not include battery nodes, unless the battery + represented cannot easily be replaced in the system by one of a + different type. This prevents unpredictable, potentially harmful, + behavior should a replacement that changes the battery type occur + without a corresponding update to the dtb. + + Battery properties are named, where possible, for the corresponding elements + in enum power_supply_property, defined in include/linux/power_supply.h + + Batteries must be referenced by chargers and/or fuel-gauges using a phandle. + The phandle's property should be named "monitored-battery". + +properties: + compatible: + const: simple-battery + + device-chemistry: + description: This describes the chemical technology of the battery. + oneOf: + - const: nickel-cadmium + - const: nickel-metal-hydride + - const: lithium-ion + description: This is a blanket type for all lithium-ion batteries, + including those below. If possible, a precise compatible string + from below should be used, but sometimes it is unknown which specific + lithium ion battery is employed and this wide compatible can be used. + - const: lithium-ion-polymer + - const: lithium-ion-iron-phosphate + - const: lithium-ion-manganese-oxide + + over-voltage-threshold-microvolt: + description: battery over-voltage limit + + re-charge-voltage-microvolt: + description: limit to automatically start charging again + + voltage-min-design-microvolt: + description: drained battery voltage + + voltage-max-design-microvolt: + description: fully charged battery voltage + + energy-full-design-microwatt-hours: + description: battery design energy + + charge-full-design-microamp-hours: + description: battery design capacity + + trickle-charge-current-microamp: + description: current for trickle-charge phase + + precharge-current-microamp: + description: current for pre-charge phase + + precharge-upper-limit-microvolt: + description: limit when to change to constant charging + + charge-term-current-microamp: + description: current for charge termination phase + + constant-charge-current-max-microamp: + description: maximum constant input current + + constant-charge-voltage-max-microvolt: + description: maximum constant input voltage + + factory-internal-resistance-micro-ohms: + description: battery factory internal resistance + + resistance-temp-table: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: the temperature in degree Celsius + - description: battery internal resistance percent + description: | + A table providing the temperature in degree Celsius + and corresponding battery internal resistance percent, which is used to + look up the resistance percent according to current temperature to get an + accurate batterty internal resistance in different temperatures. + + ocv-capacity-celsius: + description: | + An array containing the temperature in degree Celsius, + for each of the battery capacity lookup table. + + operating-range-celsius: + description: operating temperature range of a battery + items: + - description: minimum temperature at which battery can operate + - description: maximum temperature at which battery can operate + + ambient-celsius: + description: safe range of ambient temperature + items: + - description: alert when ambient temperature is lower than this value + - description: alert when ambient temperature is higher than this value + + alert-celsius: + description: safe range of battery temperature + items: + - description: alert when battery temperature is lower than this value + - description: alert when battery temperature is higher than this value + +required: + - compatible + +patternProperties: + '^ocv-capacity-table-[0-9]+$': + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + An array providing the open circuit voltage (OCV) + of the battery and corresponding battery capacity percent, which is used + to look up battery capacity according to current OCV value. And the open + circuit voltage unit is microvolt. + maxItems: 100 + items: + items: + - description: open circuit voltage (OCV) in microvolts + - description: battery capacity percent + maximum: 100 + +additionalProperties: false + +examples: + - | + power { + #address-cells = <1>; + #size-cells = <0>; + + battery: battery { + compatible = "simple-battery"; + over-voltage-threshold-microvolt = <4500000>; + re-charge-voltage-microvolt = <250000>; + voltage-min-design-microvolt = <3200000>; + voltage-max-design-microvolt = <4200000>; + energy-full-design-microwatt-hours = <5290000>; + charge-full-design-microamp-hours = <1430000>; + precharge-current-microamp = <256000>; + precharge-upper-limit-microvolt = <2500000>; + charge-term-current-microamp = <128000>; + constant-charge-current-max-microamp = <900000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <250000>; + ocv-capacity-celsius = <(-10) 0 10>; + /* table for -10 degree Celsius */ + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>; + /* table for 0 degree Celsius */ + ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>; + /* table for 10 degree Celsius */ + ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>; + resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>; + operating-range-celsius = <(-30) 50>; + ambient-celsius = <(-5) 50>; + alert-celsius = <0 40>; + }; + + charger@11 { + reg = <0x11>; + monitored-battery = <&battery>; + }; + + fuel-gauge@22 { + reg = <0x22>; + monitored-battery = <&battery>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml new file mode 100644 index 000000000..a3c00e078 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq2415x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for TI bq2415x Li-Ion Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq24150 + - ti,bq24150a + - ti,bq24151 + - ti,bq24151a + - ti,bq24152 + - ti,bq24153 + - ti,bq24153a + - ti,bq24155 + - ti,bq24156 + - ti,bq24156a + - ti,bq24158 + + reg: + maxItems: 1 + + ti,current-limit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: initial maximum current charger can pull from power supply in mA. + + ti,weak-battery-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + weak battery voltage threshold in mV. + The chip will use slow precharge if battery voltage is below this value. + + ti,battery-regulation-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging voltage in mV. + + ti,charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging current in mA. + + ti,termination-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + charge will be terminated when current in constant-voltage phase drops + below this value (in mA). + + ti,resistor-sense: + $ref: /schemas/types.yaml#/definitions/uint32 + description: value of sensing resistor in milliohm. + + ti,usb-charger-detection: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to usb charger detection device (required for auto mode) + +required: + - compatible + - reg + - ti,current-limit + - ti,weak-battery-voltage + - ti,battery-regulation-voltage + - ti,charge-current + - ti,termination-current + - ti,resistor-sense + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6b { + compatible = "ti,bq24150a"; + reg = <0x6b>; + + ti,current-limit = <100>; + ti,weak-battery-voltage = <3400>; + ti,battery-regulation-voltage = <4200>; + ti,charge-current = <650>; + ti,termination-current = <100>; + ti,resistor-sense = <68>; + + ti,usb-charger-detection = <&isp1704>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml new file mode 100644 index 000000000..4884ec90e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq24190.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for TI BQ2419x Li-Ion Battery Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq24190 + - ti,bq24192 + - ti,bq24192i + - ti,bq24196 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + usb-otg-vbus: + $ref: /schemas/regulator/regulator.yaml# + description: | + Regulator that is used to control the VBUS voltage direction for + either USB host mode or for charging on the OTG port + + ti,system-minimum-microvolt: + description: | + when power is connected and the battery is below minimum system voltage, + the system will be regulated above this setting. + + omit-battery-class: + type: boolean + description: | + If this property is set, the operating system does not try to create a + battery device. + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to a "simple-battery" compatible node. + + This property must be a phandle to a node using the format described + in battery.yaml, with the following properties being required: + - precharge-current-microamp: maximum charge current during precharge phase + (typically 20% of battery capacity). + - charge-term-current-microamp: a charge cycle terminates when the battery voltage is + above recharge threshold, and the current is below this + setting (typically 10% of battery capacity). + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + bat: battery { + compatible = "simple-battery"; + precharge-current-microamp = <256000>; + charge-term-current-microamp = <128000>; + }; + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6a { + compatible = "ti,bq24190"; + reg = <0x6a>; + interrupt-parent = <&gpiochip>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + monitored-battery = <&bat>; + ti,system-minimum-microvolt = <3200000>; + + usb_otg_vbus: usb-otg-vbus { }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml new file mode 100644 index 000000000..c7406bef0 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq24257.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq24250 + - ti,bq24251 + - ti,bq24257 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,battery-regulation-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging voltage in uV + + ti,charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging current in uA + + ti,termination-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + charge will be terminated when current in constant-voltage phase + drops below this value (in uA) + + pg-gpios: + description: | + GPIO used for connecting the bq2425x device PG (Power Good) pin. + This pin is not available on all devices however it should be used if + possible as this is the recommended way to obtain the charger's input PG + state. If this pin is not specified a software-based approach for PG + detection is used. + maxItems: 1 + + ti,current-limit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The maximum current to be drawn from the charger's input (in uA). + If this property is not specified, the input limit current is set + automatically using USB D+/D- signal based charger type detection. + If the hardware does not support the D+/D- based detection, a default + of 500,000 is used (=500mA) instead. + + ti,ovp-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Configures the over voltage protection voltage (in uV). + If not specified a default of 6,5000,000 (=6.5V) is used. + + ti,in-dpm-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Configures the threshold input voltage for the dynamic power path management (in uV). + If not specified a default of 4,360,000 (=4.36V) is used. + +required: + - compatible + - reg + - interrupts + - ti,battery-regulation-voltage + - ti,charge-current + - ti,termination-current + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6a { + compatible = "ti,bq24257"; + reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + + pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <1000000>; + ti,termination-current = <50000>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6a { + compatible = "ti,bq24250"; + reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <500000>; + ti,termination-current = <50000>; + ti,current-limit = <900000>; + ti,ovp-voltage = <9500000>; + ti,in-dpm-voltage = <4440000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml new file mode 100644 index 000000000..dd9176ce7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq24735.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for TI BQ24735 Li-Ion Battery Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,bq24735 + + reg: + maxItems: 1 + + interrupts: + description: AC adapter plug event interrupt + maxItems: 1 + + ti,ac-detect-gpios: + maxItems: 1 + description: | + This GPIO is optionally used to read the AC adapter status. This is a Host GPIO + that is configured as an input and connected to the ACOK pin on the bq24735. + Note: for backwards compatibility reasons, the GPIO must be active on AC adapter + absence despite ACOK being active (high) on AC adapter presence. + + ti,charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Used to control and set the charging current. + This value must be between 128mA and 8.128A with a 64mA step resolution. + The POR value is 0x0000h. This number is in mA (e.g. 8192). + See spec for more information about the ChargeCurrent (0x14h) register. + + ti,charge-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Used to control and set the charging voltage. + This value must be between 1.024V and 19.2V with a 16mV step resolution. + The POR value is 0x0000h. This number is in mV (e.g. 19200). + See spec for more information about the ChargeVoltage (0x15h) register. + + ti,input-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Used to control and set the charger input current. + This value must be between 128mA and 8.064A with a 128mA step resolution. + The POR value is 0x1000h. This number is in mA (e.g. 8064). + See the spec for more information about the InputCurrent (0x3fh) register. + + ti,external-control: + type: boolean + description: | + Indicates that the charger is configured externally and that the host should not + attempt to enable/disable charging or set the charge voltage/current. + + poll-interval: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds). + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + ti,ac-detect-gpios = <&gpio 72 0x1>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml new file mode 100644 index 000000000..1a1b24003 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq2515x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI bq2515x 500-mA Linear charger family + +maintainers: + - Andrew Davis <afd@ti.com> + +description: | + The BQ2515x family is a highly integrated battery charge management IC that + integrates the most common functions for wearable devices, namely a charger, + an output voltage rail, ADC for battery and system monitoring, and + push-button controller. + + Specifications about the charger can be found at: + http://www.ti.com/lit/ds/symlink/bq25150.pdf + http://www.ti.com/lit/ds/symlink/bq25155.pdf + +properties: + compatible: + enum: + - ti,bq25150 + - ti,bq25155 + + reg: + maxItems: 1 + description: I2C address of the charger. + + ac-detect-gpios: + description: | + GPIO used for connecting the bq2515x device PG (AC Detect) + pin. + maxItems: 1 + + reset-gpios: + description: GPIO used for hardware reset. + maxItems: 1 + + powerdown-gpios: + description: GPIO used for low power mode of IC. + maxItems: 1 + + charge-enable-gpios: + description: GPIO used to turn on and off charging. + maxItems: 1 + + input-current-limit-microamp: + description: Maximum input current in micro Amps. + minimum: 50000 + maximum: 500000 + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the battery node being monitored + +required: + - compatible + - reg + - monitored-battery + +additionalProperties: false + +examples: + - | + bat: battery { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <50000>; + precharge-current-microamp = <2500>; + constant-charge-voltage-max-microvolt = <4000000>; + }; + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + bq25150: charger@6b { + compatible = "ti,bq25150"; + reg = <0x6b>; + monitored-battery = <&bat>; + input-current-limit-microamp = <100000>; + + ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml new file mode 100644 index 000000000..82f382a7f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq256xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI bq256xx Switch Mode Buck Charger + +maintainers: + - Andrew Davis <afd@ti.com> + +description: | + The bq256xx devices are a family of highly-integrated battery charge + management and system power management ICs for single cell Li-ion and Li- + polymer batteries. + + Datasheets: + - https://www.ti.com/lit/ds/symlink/bq25600.pdf + - https://www.ti.com/lit/ds/symlink/bq25601.pdf + - https://www.ti.com/lit/ds/symlink/bq25600d.pdf + - https://www.ti.com/lit/ds/symlink/bq25601d.pdf + - https://www.ti.com/lit/ds/symlink/bq25611d.pdf + - https://www.ti.com/lit/ds/symlink/bq25618.pdf + - https://www.ti.com/lit/ds/symlink/bq25619.pdf + +properties: + compatible: + enum: + - ti,bq25600 + - ti,bq25601 + - ti,bq25600d + - ti,bq25601d + - ti,bq25611d + - ti,bq25618 + - ti,bq25619 + + reg: + maxItems: 1 + + ti,watchdog-timeout-ms: + default: 0 + description: | + Watchdog timer in ms. 0 (default) disables the watchdog + minimum: 0 + maximum: 160000 + enum: [ 0, 40000, 80000, 160000] + + input-voltage-limit-microvolt: + description: | + Minimum input voltage limit in µV with a 100000 µV step + minimum: 3900000 + maximum: 5400000 + + input-current-limit-microamp: + description: | + Maximum input current limit in µA with a 100000 µA step + minimum: 100000 + maximum: 3200000 + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the battery node being monitored + + interrupts: + maxItems: 1 + description: | + Interrupt sends an active low, 256 μs pulse to host to report the charger + device status and faults. + +required: + - compatible + - reg + - monitored-battery + +additionalProperties: false + +examples: + - | + bat: battery { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <2040000>; + constant-charge-voltage-max-microvolt = <4352000>; + precharge-current-microamp = <180000>; + charge-term-current-microamp = <180000>; + }; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + charger@6b { + compatible = "ti,bq25601"; + reg = <0x6b>; + monitored-battery = <&bat>; + + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,watchdog-timeout-ms = <40000>; + + input-voltage-limit-microvolt = <4500000>; + input-current-limit-microamp = <2400000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml new file mode 100644 index 000000000..204c01471 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq25890.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq25890 + - ti,bq25892 + - ti,bq25895 + - ti,bq25896 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,battery-regulation-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging voltage (in uV) + + ti,charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charging current (in uA) + + ti,termination-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + charge will be terminated when current in constant-voltage phase + drops below this value (in uA) + + ti,precharge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum charge current during precharge phase (in uA) + + ti,minimum-sys-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + when battery is charging and it is below minimum system voltage, + the system will be regulated above minimum-sys-voltage setting (in uV) + + ti,boost-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: VBUS voltage level in boost mode (in uV) + + ti,boost-max-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum allowed current draw in boost mode (in uA) + + ti,boost-low-freq: + description: boost mode frequency will be 500kHz, otherwise 1.5MHz + type: boolean + + ti,use-ilim-pin: + description: | + ILIM resistor will be used and the input current will be the lower + between the resistor setting and the IINLIM register setting + type: boolean + + ti,thermal-regulation-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + temperature above which the charge current is lowered, to avoid overheating + (in degrees Celsius). If omitted, the default setting will be used (120 degrees) + + ti,ibatcomp-micro-ohms: + description: value of a resistor in series with the battery (in Micro Ohms) + + ti,ibatcomp-clamp-microvolt: + description: max. charging voltage adjustment due to expected voltage drop on in-series resistor + +required: + - compatible + - reg + - interrupts + - ti,battery-regulation-voltage + - ti,charge-current + - ti,termination-current + - ti,precharge-current + - ti,minimum-sys-voltage + - ti,boost-voltage + - ti,boost-max-current + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@6a { + compatible = "ti,bq25890"; + reg = <0x6a>; + + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <1000000>; + ti,termination-current = <50000>; + ti,precharge-current = <128000>; + ti,minimum-sys-voltage = <3600000>; + ti,boost-voltage = <5000000>; + ti,boost-max-current = <1000000>; + + ti,use-ilim-pin; + ti,thermal-regulation-threshold = <120>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml new file mode 100644 index 000000000..b687b8bcd --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq25980.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI BQ25980 Flash Charger + +maintainers: + - Andrew Davis <afd@ti.com> + +description: | + The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended + for use in high-power density portable electronics. These inductorless + switching chargers can provide over 97% efficiency by making use of the + switched capacitor architecture. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq25980 + - ti,bq25975 + - ti,bq25960 + + reg: + maxItems: 1 + + ti,watchdog-timeout-ms: + description: | + Watchdog timer in milli seconds. 0 disables the watchdog. + default: 0 + minimum: 0 + maximum: 300000 + enum: [ 0, 5000, 10000, 50000, 300000] + + ti,sc-ovp-limit-microvolt: + description: | + Minimum input voltage limit in micro volts with a when the charger is in + switch cap mode. 100000 micro volt step. + default: 17800000 + minimum: 14000000 + maximum: 22000000 + + ti,sc-ocp-limit-microamp: + description: | + Maximum input current limit in micro amps with a 100000 micro amp step. + minimum: 100000 + maximum: 3300000 + + ti,bypass-ovp-limit-microvolt: + description: | + Minimum input voltage limit in micro volts with a when the charger is in + switch cap mode. 50000 micro volt step. + minimum: 7000000 + maximum: 12750000 + + ti,bypass-ocp-limit-microamp: + description: | + Maximum input current limit in micro amps with a 100000 micro amp step. + minimum: 100000 + maximum: 3300000 + + ti,bypass-enable: + type: boolean + description: Enables bypass mode at boot time + + interrupts: + maxItems: 1 + description: | + Indicates that the device state has changed. + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the battery node being monitored + +required: + - compatible + - reg + - monitored-battery + +unevaluatedProperties: false + +examples: + - | + bat: battery { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <4000000>; + constant-charge-voltage-max-microvolt = <8400000>; + precharge-current-microamp = <160000>; + charge-term-current-microamp = <160000>; + }; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + bq25980: charger@65 { + compatible = "ti,bq25980"; + reg = <0x65>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,watchdog-timeout-ms = <0>; + ti,sc-ocp-limit-microamp = <2000000>; + ti,sc-ovp-limit-microvolt = <17800000>; + monitored-battery = <&bat>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml new file mode 100644 index 000000000..65fc6049e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/bq27xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI BQ27XXX fuel gauge family + +maintainers: + - Pali Rohár <pali@kernel.org> + - Andrew F. Davis <afd@ti.com> + - Sebastian Reichel <sre@kernel.org> + +description: | + Support various Texas Instruments fuel gauge devices that share similar + register maps and power supply properties + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - ti,bq27200 + - ti,bq27210 + - ti,bq27500 # deprecated, use revision specific property below + - ti,bq27510 # deprecated, use revision specific property below + - ti,bq27520 # deprecated, use revision specific property below + - ti,bq27500-1 + - ti,bq27510g1 + - ti,bq27510g2 + - ti,bq27510g3 + - ti,bq27520g1 + - ti,bq27520g2 + - ti,bq27520g3 + - ti,bq27520g4 + - ti,bq27521 + - ti,bq27530 + - ti,bq27531 + - ti,bq27541 + - ti,bq27542 + - ti,bq27546 + - ti,bq27742 + - ti,bq27545 + - ti,bq27411 + - ti,bq27421 + - ti,bq27425 + - ti,bq27426 + - ti,bq27441 + - ti,bq27621 + - ti,bq27z561 + - ti,bq28z610 + - ti,bq34z100 + - ti,bq78z100 + + reg: + maxItems: 1 + description: integer, I2C address of the fuel gauge. + + monitored-battery: + description: | + phandle of battery characteristics node. + The fuel gauge uses the following battery properties: + - energy-full-design-microwatt-hours + - charge-full-design-microamp-hours + - voltage-min-design-microvolt + Both or neither of the *-full-design-*-hours properties must be set. + See Documentation/devicetree/bindings/power/supply/battery.yaml + + power-supplies: true + +required: + - compatible + - reg +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + bat: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3200000>; + energy-full-design-microwatt-hours = <5290000>; + charge-full-design-microamp-hours = <1430000>; + }; + + bq27510g3: fuel-gauge@55 { + compatible = "ti,bq27510g3"; + reg = <0x55>; + monitored-battery = <&bat>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml new file mode 100644 index 000000000..5af1e0bea --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml @@ -0,0 +1,217 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Charger Manager + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + Binding for the legacy charger manager driver. + Please do not use for new products. + +properties: + compatible: + const: charger-manager + + cm-chargers: + description: name of chargers + $ref: /schemas/types.yaml#/definitions/string-array + + cm-num-chargers: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + + cm-fuel-gauge: + description: name of battery fuel gauge + $ref: /schemas/types.yaml#/definitions/string + + cm-name: + description: name of the charger manager + default: battery + $ref: /schemas/types.yaml#/definitions/string + + cm-poll-mode: + description: polling mode + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + enum: + - 0 # disabled + - 1 # always + - 2 # when external power is connected + - 3 # when charging + + cm-poll-interval: + description: polling interval (in ms) + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-stat: + description: battery status + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # battery always present + - 1 # no battery + - 2 # check presence via fuel gauge + - 3 # check presence via charger + + cm-fullbatt-vchkdrop-volt: + description: voltage drop before restarting charging in uV + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-fullbatt-vchkdrop-ms: + deprecated: true + + cm-fullbatt-voltage: + description: voltage of full battery in uV + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-fullbatt-soc: + description: state of charge to consider as full battery in % + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-fullbatt-capacity: + description: capcity to consider as full battery in uAh + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-thermal-zone: + description: name of external thermometer's thermal zone + $ref: /schemas/types.yaml#/definitions/string + + cm-discharging-max: + description: limits of discharging duration in ms + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-charging-max: + description: limits of charging duration in ms + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-cold: + description: critical cold temperature of battery for charging in deci-degree celsius + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-cold-in-minus: + description: if set cm-battery-cold temperature is in minus degrees + type: boolean + + cm-battery-hot: + description: critical hot temperature of battery for charging in deci-degree celsius + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-battery-temp-diff: + description: temperature difference to allow recharging in deci-degree celsius + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + "-supply$": + description: regulator consumer, named according to cm-regulator-name + $ref: /schemas/types.yaml#/definitions/phandle + + "^regulator[@-][0-9]$": + type: object + properties: + cm-regulator-name: + description: name of charger regulator + $ref: /schemas/types.yaml#/definitions/string + + required: + - cm-regulator-name + + additionalProperties: false + + patternProperties: + "^cable[@-][0-9]$": + type: object + properties: + cm-cable-name: + description: name of charger cable + enum: + - USB + - USB-HOST + - SDP + - DCP + - CDP + - ACA + - FAST-CHARGER + - SLOW-CHARGER + - WPT + - PD + - DOCK + - JIG + - MECHANICAL + + cm-cable-extcon: + description: name of extcon dev + $ref: /schemas/types.yaml#/definitions/string + + cm-cable-min: + description: minimum current of cable in uA + $ref: /schemas/types.yaml#/definitions/uint32 + + cm-cable-max: + description: maximum current of cable in uA + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - cm-cable-name + - cm-cable-extcon + + additionalProperties: false + +required: + - compatible + - cm-chargers + - cm-fuel-gauge + +additionalProperties: false + +examples: + - | + charger-manager { + compatible = "charger-manager"; + chg-reg-supply = <&charger_regulator>; + + cm-name = "battery"; + /* Always polling ON : 30s */ + cm-poll-mode = <1>; + cm-poll-interval = <30000>; + + cm-fullbatt-vchkdrop-volt = <150000>; + cm-fullbatt-soc = <100>; + + cm-battery-stat = <3>; + + cm-chargers = "charger0", "charger1", "charger2"; + + cm-fuel-gauge = "fuelgauge0"; + + cm-thermal-zone = "thermal_zone.1"; + /* in deci centigrade */ + cm-battery-cold = <50>; + cm-battery-cold-in-minus; + cm-battery-hot = <800>; + cm-battery-temp-diff = <100>; + + /* Allow charging for 5hr */ + cm-charging-max = <18000000>; + /* Allow discharging for 2hr */ + cm-discharging-max = <7200000>; + + regulator-0 { + cm-regulator-name = "chg-reg"; + cable-0 { + cm-cable-name = "USB"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <475000>; + cm-cable-max = <500000>; + }; + cable-1 { + cm-cable-name = "SDP"; + cm-cable-extcon = "extcon-dev.0"; + cm-cable-min = <650000>; + cm-cable-max = <675000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml new file mode 100644 index 000000000..694bfdb58 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/cpcap-battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Motorola CPCAP PMIC battery + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Sebastian Reichel <sre@kernel.org> + +description: | + Motorola CPCAP is a PMIC found in some mobile phones, e.g. + the Droid 4. This binding describes its battery fuel gauge + sub-function. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: motorola,cpcap-battery + + interrupts: + items: + - description: eol interrupt + - description: low battery percentage interrupt + - description: critical battery percentage interrupt + - description: charger detect interrupt + - description: battery detect interrupt + - description: coulomb counter calibration interrupt + + interrupt-names: + items: + - const: eol + - const: lowbph + - const: lowbpl + - const: chrgcurr1 + - const: battdetb + - const: cccal + + io-channels: + items: + - description: battery temperature + - description: battery voltage + - description: battery charge current + - description: battery current + + io-channel-names: + items: + - const: battdetb + - const: battp + - const: chg_isense + - const: batti + + power-supplies: true + +required: + - compatible + - interrupts + - interrupt-names + - io-channels + - io-channel-names + - power-supplies + +additionalProperties: false + +examples: + - | + cpcap { + battery { + compatible = "motorola,cpcap-battery"; + interrupts-extended = + <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>, + <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>; + interrupt-names = + "eol", "lowbph", "lowbpl", + "chrgcurr1", "battdetb", "cccal"; + io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>, + <&cpcap_adc 5>, <&cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "chg_isense", "batti"; + power-supplies = <&cpcap_charger>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml new file mode 100644 index 000000000..7e6bf30a0 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/cpcap-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Motorola CPCAP PMIC charger + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Sebastian Reichel <sre@kernel.org> + +description: | + Motorola CPCAP is a PMIC found in some mobile phones, e.g. + the Droid 4. This binding describes its battery charger + sub-function. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: motorola,mapphone-cpcap-charger + + interrupts: + items: + - description: charger detection interrupt + - description: reverse charge interrupt + - description: SE1 charger detection interrupt + - description: SE0 charger detection interrupt + - description: reverse mode interrupt + - description: charge current 2 interrupt + - description: charge current 1 interrupt + - description: VBUS valid interrupt + - description: battery detect interrupt + + interrupt-names: + items: + - const: chrg_det + - const: rvrs_chrg + - const: chrg_se1b + - const: se0conn + - const: rvrs_mode + - const: chrgcurr2 + - const: chrgcurr1 + - const: vbusvld + - const: battdetb + + io-channels: + items: + - description: battery temperature + - description: battery voltage + - description: VBUS voltage + - description: battery charge current + - description: battery current + + io-channel-names: + items: + - const: battdetb + - const: battp + - const: vbus + - const: chg_isense + - const: batti + + mode-gpios: + description: | + Optionally CPCAP charger can have a companion wireless + charge controller that is controlled with two GPIOs + that are active low. + minItems: 2 + maxItems: 2 + +required: + - compatible + - interrupts + - interrupt-names + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + cpcap { + charger { + compatible = "motorola,mapphone-cpcap-charger"; + interrupts-extended = + <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, <&cpcap 28 0>, + <&cpcap 22 0>, <&cpcap 21 0>, <&cpcap 20 0>, <&cpcap 19 0>, + <&cpcap 54 0>; + interrupt-names = + "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", + "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", + "battdetb"; + mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>, + <&gpio3 23 GPIO_ACTIVE_LOW>; + io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>, + <&cpcap_adc 2>, <&cpcap_adc 5>, + <&cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "vbus", "chg_isense", + "batti"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml new file mode 100644 index 000000000..dc697b614 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery driver for CW2015 shuntless fuel gauge by CellWise. + +maintainers: + - Tobias Schramm <t.schramm@manjaro.org> + +description: | + The driver can utilize information from a simple-battery linked via a + phandle in monitored-battery. If specified the driver uses the + charge-full-design-microamp-hours property of the battery. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: cellwise,cw2015 + + reg: + maxItems: 1 + + cellwise,battery-profile: + description: | + This property specifies characteristics of the battery used. The format + of this binary blob is kept secret by CellWise. The only way to obtain + it is to mail two batteries to a test facility of CellWise and receive + back a test report with the binary blob. + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 64 + maxItems: 64 + + cellwise,monitor-interval-ms: + description: + Specifies the interval in milliseconds gauge values are polled at + minimum: 250 + + power-supplies: + minItems: 1 + maxItems: 8 # Should be enough + + monitored-battery: + description: + Specifies the phandle of a simple-battery connected to this gauge + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cw2015@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + cellwise,battery-profile = /bits/ 8 < + 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 + 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 + 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 + 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 + 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 + 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D + 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 + >; + cellwise,monitor-interval-ms = <5000>; + monitored-battery = <&bat>; + power-supplies = <&mains_charger>, <&usb_charger>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml new file mode 100644 index 000000000..b28938895 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA9150 Charger Power Supply bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: dlg,da9150-charger + + io-channels: + items: + - description: ADC channel for current + - description: ADC channel for bus voltage + - description: ADC channel for junction temperature + - description: ADC channel for battery voltage + + io-channel-names: + items: + - const: CHAN_IBUS + - const: CHAN_VBUS + - const: CHAN_TJUNC + - const: CHAN_VBAT + +required: + - compatible + +additionalProperties: false + +examples: + - | + pmic { + charger { + compatible = "dlg,da9150-charger"; + io-channels = <&gpadc 0>, + <&gpadc 2>, + <&gpadc 8>, + <&gpadc 5>; + io-channel-names = "CHAN_IBUS", + "CHAN_VBUS", + "CHAN_TJUNC", + "CHAN_VBAT"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml new file mode 100644 index 000000000..d47caf59d --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: dlg,da9150-fuel-gauge + + dlg,update-interval: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Interval time (milliseconds) between battery level checks. + + dlg,warn-soc-level: + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 100 + description: Battery discharge level (%) where warning event raised. + + dlg,crit-soc-level: + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 100 + description: | + Battery discharge level (%) where critical event raised. + This value should be lower than the warning level. + +required: + - compatible + +additionalProperties: false + +examples: + - | + pmic { + battery { + compatible = "dlg,da9150-fuel-gauge"; + dlg,update-interval = <10000>; + dlg,warn-soc-level = /bits/ 8 <15>; + dlg,crit-soc-level = /bits/ 8 <5>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml new file mode 100644 index 000000000..89f8e2bcb --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/gpio-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: simple battery chargers only communicating through GPIOs + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: + This binding is for all chargers, which are working more or less + autonomously, only providing some status GPIOs and possibly some + GPIOs for limited control over the charging process. + +properties: + compatible: + const: gpio-charger + + charger-type: + enum: + - unknown + - battery + - ups + - mains + - usb-sdp # USB standard downstream port + - usb-dcp # USB dedicated charging port + - usb-cdp # USB charging downstream port + - usb-aca # USB accessory charger adapter + description: + Type of the charger, e.g. "mains" for a wall charger. + + gpios: + maxItems: 1 + description: GPIO indicating the charger presence + + charge-status-gpios: + maxItems: 1 + description: GPIO indicating the charging status + + charge-current-limit-gpios: + minItems: 1 + maxItems: 32 + description: GPIOs used for current limiting + + charge-current-limit-mapping: + description: List of tuples with current in uA and a GPIO bitmap (in + this order). The tuples must be provided in descending order of the + current limit. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: + Current limit in uA + - description: + Encoded GPIO setting. Bit 0 represents last GPIO from the + charge-current-limit-gpios property. Bit 1 second to last + GPIO and so on. + +required: + - compatible + +anyOf: + - required: + - gpios + - required: + - charge-status-gpios + - required: + - charge-current-limit-gpios + +dependencies: + charge-current-limit-gpios: [ charge-current-limit-mapping ] + charge-current-limit-mapping: [ charge-current-limit-gpios ] + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + charger { + compatible = "gpio-charger"; + charger-type = "usb-sdp"; + + gpios = <&gpd 28 GPIO_ACTIVE_LOW>; + charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>; + + charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>, + <&gpioA 12 GPIO_ACTIVE_HIGH>; + charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low + <700000 0x01>, // 700 mA => GPIO A.12 high + <0 0x02>; // 0 mA => GPIO A.11 high + }; diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml new file mode 100644 index 000000000..46527038b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019-2020 Artur Rojek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/ingenic,battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic JZ47xx battery bindings + +maintainers: + - Artur Rojek <contact@artur-rojek.eu> + +properties: + compatible: + oneOf: + - const: ingenic,jz4740-battery + - items: + - enum: + - ingenic,jz4725b-battery + - ingenic,jz4770-battery + - const: ingenic,jz4740-battery + + io-channels: + maxItems: 1 + + io-channel-names: + const: battery + + monitored-battery: + description: > + phandle to a "simple-battery" compatible node. + + This property must be a phandle to a node using the format described + in battery.yaml, with the following properties being required: + - voltage-min-design-microvolt: drained battery voltage, + - voltage-max-design-microvolt: fully charged battery voltage. + +required: + - compatible + - io-channels + - io-channel-names + - monitored-battery + +additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/adc/ingenic,adc.h> + + simple_battery: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3600000>; + voltage-max-design-microvolt = <4200000>; + }; + + ingenic-battery { + compatible = "ingenic,jz4740-battery"; + io-channels = <&adc INGENIC_ADC_BATTERY>; + io-channel-names = "battery"; + monitored-battery = <&simple_battery>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/isp1704.yaml b/Documentation/devicetree/bindings/power/supply/isp1704.yaml new file mode 100644 index 000000000..7e3449ed7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/isp1704.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/isp1704.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for NXP ISP1704 USB Charger Detection + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: nxp,isp1704 + + nxp,enable-gpio: + maxItems: 1 + description: GPIO connected to the chip's enable pin + + usb-phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: USB PHY the ISP1704 is connected to + +required: + - compatible + - nxp,enable-gpio + - usb-phy + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + charger-detect { + compatible = "nxp,isp1704"; + nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + usb-phy = <&usb2_phy>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml new file mode 100644 index 000000000..a99d989f1 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LEGO MINDSTORMS EV3 Battery + +maintainers: + - David Lechner <david@lechnology.com> + - Sebastian Reichel <sre@kernel.org> + +description: | + LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery. + It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is + detected by a key switch in the battery compartment. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: lego,ev3-battery + + io-channels: + items: + - description: ADC channel for battery voltage + - description: ADC channel for battery current + + io-channel-names: + items: + - const: voltage + - const: current + + rechargeable-gpios: + maxItems: 1 + description: Rechargeable battery indication gpio + +required: + - compatible + - io-channels + - io-channel-names + - rechargeable-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + battery { + compatible = "lego,ev3-battery"; + io-channels = <&adc 4>, <&adc 3>; + io-channel-names = "voltage", "current"; + rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml new file mode 100644 index 000000000..76cedf95a --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LT3651 Charger Power Supply bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - lltc,lt3651-charger + - lltc,ltc3651-charger # deprecated, use lltc,lt3651-charger + + lltc,acpr-gpios: + maxItems: 1 + + lltc,fault-gpios: + maxItems: 1 + + lltc,chrg-gpios: + maxItems: 1 + +required: + - compatible + - lltc,acpr-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + charger { + compatible = "lltc,lt3651-charger"; + lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; + lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; + lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml new file mode 100644 index 000000000..109b41a0d --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges + +description: | + All chips measure battery capacity. + The LTC2942 is pin compatible with the LTC2941, it adds voltage and + temperature monitoring, and is runtime detected. LTC2943 and LTC2944 + are software compatible, uses a slightly different conversion formula + for the charge counter and adds voltage, current and temperature monitoring. + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - lltc,ltc2941 + - lltc,ltc2942 + - lltc,ltc2943 + - lltc,ltc2944 + + reg: + maxItems: 1 + + lltc,resistor-sense: + $ref: /schemas/types.yaml#/definitions/int32 + description: | + Sense resistor value in milli-ohms. + Can be negative value when the battery has been connected to the wrong end of the resistor. + + lltc,prescaler-exponent: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The prescaler exponent as explained in the datasheet. + This determines the range and accuracy of the gauge. + The value is programmed into the chip only if it differs from the current setting. + The setting is lost when the battery is disconnected. + +required: + - compatible + - reg + - lltc,resistor-sense + - lltc,prescaler-exponent + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + battery@64 { + compatible = "lltc,ltc2943"; + reg = <0x64>; + lltc,resistor-sense = <15>; + lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */ + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml new file mode 100644 index 000000000..cfffaeef8 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2020 Topic Embedded Products +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/ltc4162-l.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Linear Technology (Analog Devices) LTC4162-L Charger + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +description: | + The LTC ® 4162-L is an advanced monolithic synchronous step-down switching + battery charger and PowerPath (TM) manager that seamlessly manages power + distribution between input sources such as wall adapters, backplanes, solar + panels, etc., and a rechargeable Lithium-Ion/Polymer battery. + + Specifications about the charger can be found at: + https://www.analog.com/en/products/ltc4162-s.html + +properties: + compatible: + enum: + - lltc,ltc4162-l + + reg: + maxItems: 1 + description: I2C address of the charger. + + lltc,rsnsb-micro-ohms: + description: Battery sense resistor in microohm. + minimum: 1000 + + lltc,rsnsi-micro-ohms: + description: Input current sense resistor in microohm. + minimum: 1000 + + lltc,cell-count: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Number of battery cells. If not provided, will be obtained from the chip + once the external power is applied. Omit this when the number of cells + is somewhat dynamic. Without it, several measurements will return 0 until + the charger is connected to an external supply. + +required: + - compatible + - reg + - lltc,rsnsb-micro-ohms + - lltc,rsnsi-micro-ohms + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + charger: battery-charger@68 { + compatible = "lltc,ltc4162-l"; + reg = <0x68>; + lltc,rsnsb-micro-ohms = <10000>; + lltc,rsnsi-micro-ohms = <16000>; + lltc,cell-count = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml new file mode 100644 index 000000000..62eeddb65 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/max77650-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery charger driver for MAX77650 PMIC from Maxim Integrated. + +maintainers: + - Bartosz Golaszewski <bgolaszewski@baylibre.com> + +description: | + This module is part of the MAX77650 MFD device. For more details + see Documentation/devicetree/bindings/mfd/max77650.yaml. + + The charger is represented as a sub-node of the PMIC node on the device tree. + +properties: + compatible: + const: maxim,max77650-charger + + input-voltage-min-microvolt: + description: + Minimum CHGIN regulation voltage. + enum: [ 4000000, 4100000, 4200000, 4300000, + 4400000, 4500000, 4600000, 4700000 ] + + input-current-limit-microamp: + description: + CHGIN input current limit (in microamps). + enum: [ 95000, 190000, 285000, 380000, 475000 ] + +required: + - compatible +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/power/supply/max8925_battery.txt b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt new file mode 100644 index 000000000..d7e3e0c0f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt @@ -0,0 +1,18 @@ +max8925-battery bindings +~~~~~~~~~~~~~~~~ + +Optional properties : + - batt-detect: whether support battery detect + - topoff-threshold: set charging current in topoff mode + - fast-charge: set charging current in fast mode + - no-temp-support: whether support temperature protection detect + - no-insert-detect: whether support insert detect + +Example: + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml new file mode 100644 index 000000000..c838efcf7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim DS2760 DT bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + The ds2760 is a w1 slave device and must hence have its sub-node in + DT under a w1 bus master node. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: maxim,ds2760 + + maxim,pmod-enabled: + description: | + Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds + and leave sleep Mode when the DQ line goes high. + type: boolean + + maxim,cache-time-ms: + description: | + Time im milliseconds to cache the data for. + When this time expires, the values are read again from the hardware. + Defaults to 1000. + + rated-capacity-microamp-hours: + description: | + The rated capacity of the battery, in mAh. + If not specified, the value stored in the non-volatile chip memory is used. + +required: + - compatible + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml new file mode 100644 index 000000000..4d3a1d090 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for + additional information and example. + +properties: + compatible: + enum: + - maxim,max14577-charger + - maxim,max77836-charger + + maxim,constant-uvolt: + description: + Battery Constant Voltage in uV + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 4000000 + maximum: 4350000 + + maxim,eoc-uamp: + description: | + Current in uA for End-Of-Charge mode. + MAX14577: 50000-20000 + MAX77836: 5000-100000 + $ref: /schemas/types.yaml#/definitions/uint32 + + maxim,fast-charge-uamp: + description: | + Current in uA for Fast Charge + MAX14577: 90000-950000 + MAX77836: 45000-475000 + $ref: /schemas/types.yaml#/definitions/uint32 + + maxim,ovp-uvolt: + description: + OverVoltage Protection Threshold in uV; In an overvoltage condition, INT + asserts and charging stops. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [6000000, 6500000, 7000000, 7500000] + +required: + - compatible + - maxim,constant-uvolt + - maxim,eoc-uamp + - maxim,fast-charge-uamp + - maxim,ovp-uvolt + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577-charger + then: + properties: + maxim,eoc-uamp: + minimum: 50000 + maximum: 200000 + maxim,fast-charge-uamp: + minimum: 90000 + maximum: 950000 + else: + # max77836 + properties: + maxim,eoc-uamp: + minimum: 5000 + maximum: 100000 + maxim,fast-charge-uamp: + minimum: 45000 + maximum: 475000 + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml new file mode 100644 index 000000000..070ef6f96 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max14656.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14656 DT bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: maxim,max14656 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger-detector@35 { + compatible = "maxim,max14656"; + reg = <0x35>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml new file mode 100644 index 000000000..3a529326e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max17040.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim 17040 fuel gauge series + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - maxim,max17040 + - maxim,max17041 + - maxim,max17043 + - maxim,max17044 + - maxim,max17048 + - maxim,max17049 + - maxim,max17058 + - maxim,max17059 + - maxim,max77836-battery + + reg: + maxItems: 1 + + maxim,alert-low-soc-level: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + description: | + The alert threshold that sets the state of charge level (%) where an interrupt is generated. + If skipped the power up default value of 4 (%) will be used. + + maxim,double-soc: + type: boolean + description: | + Certain devices return double the capacity. + Specify this to divide the reported value in 2 and thus normalize it. + SoC == State of Charge == Capacity. + + maxim,rcomp: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 2 + description: | + A value to compensate readings for various battery chemistries and operating temperatures. + max17040,41 have 2 byte rcomp, default to 0x97 0x00. + All other devices have one byte rcomp, default to 0x97. + + interrupts: + maxItems: 1 + + wakeup-source: + type: boolean + description: | + Use this property to use alert low SoC level interrupt as wake up source. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + battery@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + maxim,rcomp = /bits/ 8 <0x56>; + maxim,alert-low-soc-level = <10>; + maxim,double-soc; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + battery@36 { + compatible = "maxim,max77836-battery"; + reg = <0x36>; + maxim,alert-low-soc-level = <10>; + interrupt-parent = <&gpio7>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml new file mode 100644 index 000000000..aff5d0792 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max17042.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim 17042 fuel gauge series + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - maxim,max17042 + - maxim,max17047 + - maxim,max17050 + - maxim,max17055 + - maxim,max77849-battery + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: | + The ALRT pin, an open-drain interrupt. + + maxim,rsns-microohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000). + Defining this property enables current-sense functionality. + + maxim,cold-temp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Temperature threshold to report battery as cold (in tenths of degree Celsius). + Default is not to report cold events. + + maxim,over-heat-temp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Temperature threshold to report battery as over heated (in tenths of degree Celsius). + Default is not to report over heating events. + + maxim,dead-volt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Voltage threshold to report battery as dead (in mV). + Default is not to report dead battery events. + + maxim,over-volt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Voltage threshold to report battery as over voltage (in mV). + Default is not to report over-voltage events. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + battery@36 { + compatible = "maxim,max17042"; + reg = <0x36>; + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,over-volt = <4300>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml new file mode 100644 index 000000000..f5fd53deb --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77693-charger + + maxim,constant-microvolt: + description: | + Battery constant voltage in uV. The charger will operate in fast + charge constant current mode till battery voltage reaches this level. + Then the charger will switch to fast charge constant voltage mode. + Also vsys (system voltage) will be set to this value when DC power is + supplied but charger is not enabled. + Valid values: 3650000 - 4400000, step by 25000 (rounded down) + minimum: 3650000 + maximum: 4400000 + default: 4200000 + + maxim,min-system-microvolt: + description: | + Minimal system voltage in uV. + enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000, + 3600000, 3700000] + default: 3600000 + + maxim,thermal-regulation-celsius: + description: | + Temperature in Celsius for entering high temperature charging mode. + If die temperature exceeds this value the charging current will be + reduced by 105 mA/Celsius. + enum: [70, 85, 100, 115] + default: 100 + + maxim,battery-overcurrent-microamp: + description: | + Overcurrent protection threshold in uA (current from battery to + system). + Valid values: 2000000 - 3500000, step by 250000 (rounded down) + minimum: 2000000 + maximum: 3500000 + default: 3500000 + + maxim,charge-input-threshold-microvolt: + description: | + Threshold voltage in uV for triggering input voltage regulation loop. + If input voltage decreases below this value, the input current will + be reduced to reach the threshold voltage. + enum: [4300000, 4700000, 4800000, 4900000] + default: 4300000 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml new file mode 100644 index 000000000..f23dcc507 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max77976.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX77976 Battery charger + +maintainers: + - Luca Ceresoli <luca.ceresoli@bootlin.com> + +description: | + The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger + configured via I2C. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: maxim,max77976 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@6b { + compatible = "maxim,max77976"; + reg = <0x6b>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml new file mode 100644 index 000000000..a8d625f28 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max8903.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Semiconductor MAX8903 Battery Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: maxim,max8903 + + dok-gpios: + maxItems: 1 + description: Valid DC power has been detected (active low, input) + + uok-gpios: + maxItems: 1 + description: Valid USB power has been detected (active low, input) + + cen-gpios: + maxItems: 1 + description: Charge enable pin (active low, output) + + chg-gpios: + maxItems: 1 + description: Charger status pin (active low, input) + + flt-gpios: + maxItems: 1 + description: Fault pin (active low, output) + + dcm-gpios: + maxItems: 1 + description: Current limit mode setting (DC=1 or USB=0, output) + + usus-gpios: + maxItems: 1 + description: USB suspend pin (active high, output) + +required: + - compatible + +anyOf: + - required: + - dok-gpios + - required: + - uok-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + charger { + compatible = "maxim,max8903"; + dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml new file mode 100644 index 000000000..fd491c598 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6370 Battery Charger + +maintainers: + - ChiaEn Wu <chiaen_wu@richtek.com> + +description: | + This module is part of the MT6370 MFD device. + Provides Battery Charger, Boost for OTG devices and BC1.2 detection. + +properties: + compatible: + const: mediatek,mt6370-charger + + interrupts: + description: | + Specify what irqs are needed to be handled by MT6370 Charger driver. + We need to use the IRQ "MT6370_IRQ_OVPCTRL_UVP_D" to know when USB + is plugged in, and then the driver will enable BC1.2 detection. + After the hardware of MT6370 completes the BC1.2 detection, + IRQ "MT6370_IRQ_ATTACH" will be triggered, and the driver will know + the result of BC1.2 detection. + When the IRQ "MT6370_IRQ_CHG_MIVR" is triggered, it means that the + hardware enters the "Minimum Input Voltage Regulation loop" and + a workaround needs to be applied at this time. + In summary, "MT6370_IRQ_OVPCTRL_UVP_D", "MT6370_IRQ_ATTACH" and + "MT6370_IRQ_CHG_MIVR" are required in this charger driver. + items: + - description: irq of "USB is plugged in" + - description: irq of "BC1.2 is done" + - description: irq of "Minimum Input Voltage Regulation loop is active" + + interrupt-names: + items: + - const: uvp_d_evt + - const: attach_i + - const: mivr + + io-channels: + description: | + Use ADC channel to read VBUS, IBUS, IBAT, etc., info. + minItems: 1 + items: + - description: | + VBUS voltage with lower accuracy (+-75mV) but higher measure + range (1~22V) + - description: | + VBUS voltage with higher accuracy (+-30mV) but lower measure + range (1~9.76V) + - description: the main system input voltage + - description: battery voltage + - description: battery temperature-sense input voltage + - description: IBUS current (required) + - description: battery current + - description: | + regulated output voltage to supply for the PWM low-side gate driver + and the bootstrap capacitor + - description: IC junction temperature + + io-channel-names: + minItems: 1 + items: + - const: vbusdiv5 + - const: vbusdiv2 + - const: vsys + - const: vbat + - const: ts_bat + - const: ibus + - const: ibat + - const: chg_vddp + - const: temp_jc + + usb-otg-vbus-regulator: + type: object + description: OTG boost regulator. + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml# + + properties: + enable-gpios: + maxItems: 1 + +required: + - compatible + - interrupts + - interrupt-names + - io-channels + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml new file mode 100644 index 000000000..b9bd1591e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/microchip,ucs1002.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip UCS1002 USB Port Power Controller + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +properties: + compatible: + const: microchip,ucs1002 + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + interrupt-names: + oneOf: + - items: + - const: a_det + - const: alert + - const: a_det + - const: alert + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@32 { + compatible = "microchip,ucs1002"; + reg = <0x32>; + interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>, + <&gpio3 21 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "a_det", "alert"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml new file mode 100644 index 000000000..b89b15a5b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery charger driver for MT6360 PMIC from MediaTek Integrated. + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + This module is part of the MT6360 MFD device. + Provides Battery Charger, Boost for OTG devices and BC1.2 detection. + +properties: + compatible: + const: mediatek,mt6360-chg + + richtek,vinovp-microvolt: + description: Maximum CHGIN regulation voltage in uV. + enum: [ 5500000, 6500000, 11000000, 14500000 ] + + + usb-otg-vbus-regulator: + type: object + description: OTG boost regulator. + $ref: /schemas/regulator/regulator.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + mt6360_charger: charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml new file mode 100644 index 000000000..5178e6207 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nokia N900 battery + +maintainers: + - Pali Rohár <pali@kernel.org> + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: nokia,n900-battery + + io-channels: + items: + - description: ADC channel for temperature reading + - description: ADC channel for battery size identification + - description: ADC channel to measure the battery voltage + + io-channel-names: + items: + - const: temp + - const: bsi + - const: vbat + +required: + - compatible + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + battery { + compatible = "nokia,n900-battery"; + io-channels = <&twl4030_madc 0>, + <&twl4030_madc 4>, + <&twl4030_madc 12>; + io-channel-names = "temp", + "bsi", + "vbat"; + }; diff --git a/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml new file mode 100644 index 000000000..dd89e2532 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/olpc-battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OLPC Battery + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - items: + - const: olpc,xo1.5-battery + - const: olpc,xo1-battery + - items: + - const: olpc,xo1-battery + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml new file mode 100644 index 000000000..2f672e6e8 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/power-supply.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power Supply Core Support + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +properties: + power-supplies: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: + This property is added to a supply in order to list the devices which + supply it power, referenced by their phandles. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml new file mode 100644 index 000000000..cbac55d3c --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Switch-Mode Battery Charger and Boost + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +properties: + compatible: + enum: + - qcom,pm8226-charger + - qcom,pm8941-charger + + reg: + maxItems: 1 + + interrupts: + items: + - description: charge done + - description: charge fast mode + - description: charge trickle mode + - description: battery temperature ok + - description: battery present + - description: charger disconnected + - description: USB-in valid + - description: DC-in valid + + interrupt-names: + items: + - const: chg-done + - const: chg-fast + - const: chg-trkl + - const: bat-temp-ok + - const: bat-present + - const: chg-gone + - const: usb-valid + - const: dc-valid + + qcom,fast-charge-current-limit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 100000 + maximum: 3000000 + description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A + + qcom,fast-charge-low-threshold-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2100000 + maximum: 3600000 + description: | + Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V + Below this value linear or switch-mode auto-trickle-charging will operate. + + qcom,fast-charge-high-threshold-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 3240000 + maximum: 5000000 + description: | + Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V + The fast charger will attempt to charge the battery to this voltage. + May be clamped to safety limits. + + qcom,fast-charge-safe-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 3240000 + maximum: 5000000 + description: | + Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case, + setting this will harmlessly fail. The property 'fast-charge-high-watermark' will + be clamped by this value. Defaults to 4.2V. + + qcom,fast-charge-safe-current: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 100000 + maximum: 3000000 + description: | + Maximum safe battery charge current in uA; May pre-set by bootloader, in which case, + setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit' + will be clamped by this value. Defaults to 1A. + + qcom,auto-recharge-threshold-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 3240000 + maximum: 5000000 + description: | + Battery voltage limit in uV below which auto-recharge functionality will restart charging + after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value. + Defaults to 4.1V. + + qcom,minimum-input-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 4200000 + maximum: 9600000 + description: | + Input voltage level in uV above which charging may operate. Defaults to 4.3V. + + qcom,dc-current-limit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 100000 + maximum: 2500000 + description: | + Default DC charge current limit in uA. Defaults to 100mA. + + qcom,disable-dc: + type: boolean + description: Disable DC charger + + qcom,jeita-extended-temp-range: + type: boolean + description: | + Enable JEITA extended temperature range; This does *not* adjust the maximum charge + voltage or current in the extended temperature range. It only allows charging when + the battery is in the extended temperature range. Voltage/current regulation must + be done externally to fully comply with the JEITA safety guidelines if this flag + is set. + + usb-charge-current-limit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 100000 + maximum: 2500000 + description: | + Default USB charge current limit in uA. + + usb-otg-in-supply: + description: Reference to the regulator supplying power to the USB_OTG_IN pin. + + otg-vbus: + $ref: /schemas/regulator/regulator.yaml# + description: | + This node defines a regulator used to control the direction of VBUS voltage. + Specifically whether to supply voltage to VBUS for host mode operation of the OTG port, + or allow input voltage from external VBUS for charging. In the hardware, the supply for + this regulator comes from usb_otg_in-supply. + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + charger@1000 { + compatible = "qcom,pm8941-charger"; + reg = <0x1000>; + interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "chg-done", + "chg-fast", + "chg-trkl", + "bat-temp-ok", + "bat-present", + "chg-gone", + "usb-valid", + "dc-valid"; + qcom,fast-charge-current-limit = <1000000>; + qcom,dc-current-limit = <1000000>; + usb-otg-in-supply = <&pm8941_5vs1>; + + otg-vbus {}; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml new file mode 100644 index 000000000..0450f4dd4 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-coincell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Coincell Charger + +description: | + The hardware block controls charging for a coincell or capacitor that is + used to provide power backup for certain features of the power management + IC (PMIC) + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +properties: + compatible: + const: qcom,pm8941-coincell + + reg: + maxItems: 1 + + qcom,rset-ohms: + description: resistance (in ohms) for current-limiting resistor + enum: [ 800, 1200, 1700, 2100 ] + + qcom,vset-millivolts: + $ref: /schemas/types.yaml#/definitions/uint32 + description: voltage (in millivolts) to apply for charging + enum: [ 2500, 3000, 3100, 3200 ] + + qcom,charger-disable: + type: boolean + description: defining this property disables charging + +required: + - compatible + - reg + - qcom,rset-ohms + - qcom,vset-millivolts + +additionalProperties: false + +examples: + - | + pmic { + #address-cells = <1>; + #size-cells = <0>; + + charger@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml new file mode 100644 index 000000000..756c16d17 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 PMIC Fuel Gauge + +maintainers: + - Stephan Gerhold <stephan@gerhold.net> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: richtek,rt5033-battery + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml new file mode 100644 index 000000000..bce151013 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for Richtek rt9455 battery charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: richtek,rt9455 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + richtek,output-charge-current: + $ref: /schemas/types.yaml#/definitions/uint32 + description: output current from the charger to the battery, in uA. + + richtek,end-of-charge-percentage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + percent of the output charge current. When the current in constant-voltage phase drops + below output_charge_current x end-of-charge-percentage, charge is terminated. + + richtek,battery-regulation-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum battery voltage in uV. + + richtek,boost-output-voltage: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + maximum voltage provided to consumer devices, when the charger is in boost mode, in uV. + + richtek,min-input-voltage-regulation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + input voltage level in uV, used to decrease voltage level when the over current of the + input power source occurs. This prevents input voltage drop due to insufficient + current provided by the power source. Defaults to 4500000 uV (4.5V). + + richtek,avg-input-current-regulation: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + input current value in uA drained by the charger from the power source. + Defaults to 500000 uA (500mA). + +required: + - compatible + - reg + - interrupts + - richtek,output-charge-current + - richtek,end-of-charge-percentage + - richtek,battery-regulation-voltage + - richtek,boost-output-voltage + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + charger@22 { + compatible = "richtek,rt9455"; + reg = <0x22>; + + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + richtek,output-charge-current = <500000>; + richtek,end-of-charge-percentage = <10>; + richtek,battery-regulation-voltage = <4200000>; + richtek,boost-output-voltage = <5050000>; + + richtek,min-input-voltage-regulation = <4500000>; + richtek,avg-input-current-regulation = <500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml new file mode 100644 index 000000000..24b06957b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD99954 Battery charger + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Markus Laine <markus.laine@fi.rohmeurope.com> + - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com> + +description: | + The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion + secondary battery intended to be used in space-constraint equipment such + as Low profile Notebook PC, Tablets and other applications. BD99954 + provides a Dual-source Battery Charger, two port BC1.2 detection and a + Battery Monitor. + + +properties: + compatible: + const: rohm,bd99954 +# +# The battery charging profile of BD99954. +# +# Curve (1) represents charging current. +# Curve (2) represents battery voltage. +# +# The BD99954 data sheet divides charging to three phases. +# a) Trickle-charge with constant current (8). +# b) pre-charge with constant current (6) +# c) fast-charge with: +# First a constant current (5) phase (CC) +# Then constant voltage (CV) phase (after the battery voltage has reached +# target level - until charging current has dropped to termination +# level (7) +# +# V ^ ^ I +# . . +# . . +# (4)- -.- - - - - - - - - - - - - - +++++++++++++++++++++++++++. +# . / . +# . ++++++/++ - - - - - - - - - - - - -.- - (5) +# . + / + . +# . + - -- . +# . + - + . +# . +.- -: . +# . .+ +` . +# . .- + | `/ . +# . .." + .: . +# . -" + -- . +# . (2) ..." + | :- . +# . ..."" + -: . +# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6) +# . + `:. . +# . + | -: . +# . + -: . +# . + .. . +# . (1) + | "+++- - - -.- - (7) +# -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8) +# . + - +# -------------------------------------------------+++++++++--> +# | | | CC | CV | +# | --trickle-- | -pre- | ---------fast----------- | +# +# The charger uses the following battery properties +# - trickle-charge-current-microamp: +# Current used at trickle-charge phase (8 in above chart) +# minimum: 64000 +# maximum: 1024000 +# multipleOf: 64000 +# - precharge-current-microamp: +# Current used at pre-charge phase (6 in above chart) +# minimum: 64000 +# maximum: 1024000 +# multipleOf: 64000 +# - constant-charge-current-max-microamp +# Current used at fast charge constant current phase (5 in above chart) +# minimum: 64000 +# maximum: 1024000 +# multipleOf: 64000 +# - constant-charge-voltage-max-microvolt +# The constant voltage used in fast charging phase (4 in above chart) +# minimum: 2560000 +# maximum: 19200000 +# multipleOf: 16000 +# - precharge-upper-limit-microvolt +# charging mode is changed from trickle charging to pre-charging +# when battery voltage exceeds this limit voltage (3 in above chart) +# minimum: 2048000 +# maximum: 19200000 +# multipleOf: 64000 +# - re-charge-voltage-microvolt +# minimum: 2560000 +# maximum: 19200000 +# multipleOf: 16000 +# re-charging is automatically started when battry has been discharging +# to the point where the battery voltage drops below this limit +# - over-voltage-threshold-microvolt +# battery is expected to be faulty if battery voltage exceeds this limit. +# Charger will then enter to a "battery faulty" -state +# minimum: 2560000 +# maximum: 19200000 +# multipleOf: 16000 +# - charge-term-current-microamp +# minimum: 0 +# maximum: 1024000 +# multipleOf: 64000 +# a charge cycle terminates when the battery voltage is above recharge +# threshold, and the current is below this setting (7 in above chart) +# See also Documentation/devicetree/bindings/power/supply/battery.yaml + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + monitored-battery: + description: + phandle of battery characteristics devicetree node + + rohm,vsys-regulation-microvolt: + description: system specific lower limit for system voltage. + minimum: 2560000 + maximum: 19200000 + multipleOf: 64000 + + rohm,vbus-input-current-limit-microamp: + description: system specific VBUS input current limit (in microamps). + minimum: 32000 + maximum: 16352000 + multipleOf: 32000 + + rohm,vcc-input-current-limit-microamp: + description: system specific VCC/VACP input current limit (in microamps). + minimum: 32000 + maximum: 16352000 + multipleOf: 32000 + +required: + - compatible + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + charger@9 { + compatible = "rohm,bd99954"; + monitored-battery = <&battery>; + reg = <0x9>; + interrupt-parent = <&gpio1>; + interrupts = <29 8>; + rohm,vsys-regulation-microvolt = <8960000>; + rohm,vbus-input-current-limit-microamp = <1472000>; + rohm,vcc-input-current-limit-microamp = <1472000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml new file mode 100644 index 000000000..40292d581 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/samsung,battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SDI Batteries + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + Samsung SDI (Samsung Digital Interface) batteries are all different versions + of lithium ion chemistry devices used for mobile phones, laptops and other + portable electronics. The batteries are adapted to a specific product and + the physical restrictions make it impossible to use another battery with the + product, so product device trees can specify these batteries. Operating + systems should determine hardware characteristics of the batteries from the + compatible string. + +properties: + compatible: + oneOf: + - const: samsung,eb-l1m7flu + description: 3.8V 1500 mAh battery used in Samsung GT-I8190 + - const: samsung,eb425161la + description: 3.8V 1500 mAh battery used in Samsung SGH-T599 and SGH-I407 + - const: samsung,eb425161lu + description: 3.8V 1500 mAh battery used in Samsung GT-I8160 + - const: samsung,eb485159lu + description: 3.8V 1700 mAh battery used in Samsung GT-S7710 + - const: samsung,eb535151vu + description: 3.8V 1500 mAh battery used in Samsung GT-I9070 + - const: samsung,eb585157lu + description: 3.8V 2000 mAh battery used in Samsung GT-I8530 + +required: + - compatible + +additionalProperties: false + +examples: + - | + power { + #address-cells = <1>; + #size-cells = <0>; + + battery: battery { + compatible = "samsung,eb425161la"; + }; + + charger@11 { + reg = <0x11>; + monitored-battery = <&battery>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml new file mode 100644 index 000000000..90b9d3d88 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SBS compliant battery + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + Battery compatible with the smart battery system specifications + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,bq20z45 + - ti,bq20z65 + - ti,bq20z75 + - enum: + - sbs,sbs-battery + - items: + - const: sbs,sbs-battery + + reg: + maxItems: 1 + + sbs,i2c-retry-count: + description: + The number of times to retry I2C transactions on I2C IO failure. + default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + + sbs,poll-retry-count: + description: + The number of times to try looking for new status after an external + change notification. + default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + + sbs,battery-detect-gpios: + description: + GPIO which signals battery detection. If this is not supplied, the bus + needs to be polled to detect the battery. + maxItems: 1 + + sbs,disable-charger-broadcasts: + description: + SBS batteries by default send broadcast messages to SBS compliant chargers to + configure max. charge current/voltage. If your hardware does not have an SBS + compliant charger it should be disabled via this property to avoid blocking + the bus. Also some SBS battery fuel gauges are known to have a buggy multi- + master implementation. + type: boolean + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + battery@b { + compatible = "ti,bq20z75", "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; + sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>; + sbs,disable-charger-broadcasts; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml new file mode 100644 index 000000000..cb73ffa47 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/sbs,sbs-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SBS compliant charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + Charger compatible with the smart battery system specifications + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - lltc,ltc4100 + - enum: + - sbs,sbs-charger + - items: + - const: sbs,sbs-charger + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@9 { + compatible = "lltc,ltc4100", "sbs,sbs-charger"; + reg = <0x9>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml new file mode 100644 index 000000000..99f506d6b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SBS compliant manger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - lltc,ltc1760 + - enum: + - sbs,sbs-manager + - items: + - const: sbs,sbs-manager + + reg: + const: 0xa + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + gpio-controller: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "^i2c@[1-4]$": + type: object + $ref: /schemas/i2c/i2c-controller.yaml# + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + batman: battery-manager@a { + compatible = "lltc,ltc1760", "sbs,sbs-manager"; + reg = <0x0a>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + battery@b { + compatible = "ti,bq20z65", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 1 1>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + battery@b { + compatible = "ti,bq20z65", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 2 1>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + battery@b { + compatible = "ti,bq20z65", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 3 1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml new file mode 100644 index 000000000..eeb043f9b --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/sc2731-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC2731 PMICs battery charger binding + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: sprd,sc2731-charger + + reg: + maxItems: 1 + + phys: + maxItems: 1 + description: phandle to the USB phy + + monitored-battery: + description: | + The charger uses the following battery properties + - charge-term-current-microamp: current for charge termination phase. + - constant-charge-voltage-max-microvolt: maximum constant input voltage. + See Documentation/devicetree/bindings/power/supply/battery.yaml + +additionalProperties: false + +examples: + - | + bat: battery { + compatible = "simple-battery"; + charge-term-current-microamp = <120000>; + constant-charge-voltage-max-microvolt = <4350000>; + }; + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + battery@a00 { + compatible = "sprd,sc2731-charger"; + reg = <0x0>; + phys = <&ssphy>; + monitored-battery = <&bat>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml new file mode 100644 index 000000000..d90a838a1 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - sprd,sc2720-fgu + - sprd,sc2721-fgu + - sprd,sc2723-fgu + - sprd,sc2730-fgu + - sprd,sc2731-fgu + + reg: + maxItems: 1 + + battery-detect-gpios: + maxItems: 1 + + io-channels: + items: + - description: Battery Temperature ADC + - description: Battery Charge Voltage ADC + + io-channel-names: + items: + - const: bat-temp + - const: charge-vol + + nvmem-cells: + maxItems: 1 + description: Calibration cells provided by eFuse device + + nvmem-cell-names: + const: fgu_calib + + sprd,calib-resistance-micro-ohms: + description: real resistance of coulomb counter chip in micro Ohms + + monitored-battery: true + +required: + - compatible + - reg + - battery-detect-gpios + - io-channels + - io-channel-names + - nvmem-cells + - nvmem-cell-names + - sprd,calib-resistance-micro-ohms + - monitored-battery + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + bat: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <1900000>; + constant-charge-voltage-max-microvolt = <4350000>; + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, + <4022000 85>, <3983000 80>, <3949000 75>, + <3917000 70>, <3889000 65>, <3864000 60>, + <3835000 55>, <3805000 50>, <3787000 45>, + <3777000 40>, <3773000 35>, <3770000 30>, + <3765000 25>, <3752000 20>, <3724000 15>, + <3680000 10>, <3605000 5>, <3400000 0>; + // ... + }; + + pmic { + #address-cells = <1>; + #size-cells = <0>; + + battery@a00 { + compatible = "sprd,sc2731-fgu"; + reg = <0xa00>; + battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; + io-channels = <&pmic_adc 5>, <&pmic_adc 14>; + io-channel-names = "bat-temp", "charge-vol"; + nvmem-cells = <&fgu_calib>; + nvmem-cell-names = "fgu_calib"; + monitored-battery = <&bat>; + sprd,calib-resistance-micro-ohms = <21500>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt new file mode 100644 index 000000000..ee125cb0e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt @@ -0,0 +1,34 @@ +AB85000 PMIC contains a node, which contains shared +information about the battery connected to the PMIC. +The node has no compatible property. + +Properties of this node are: + +thermistor-on-batctrl: + A boolean value indicating thermistor interface to battery + + Note: + 'btemp' and 'batctrl' are the pins interfaced for battery temperature + measurement, 'btemp' signal is used when NTC(negative temperature + coefficient) resister is interfaced external to battery whereas + 'batctrl' pin is used when NTC resister is internal to battery. + + Example: + ab8500_battery: ab8500_battery { + thermistor-on-batctrl; + }; + indicates: NTC resister is internal to battery, 'batctrl' is used + for thermal measurement. + + The absence of property 'thermal-on-batctrl' indicates + NTC resister is external to battery and 'btemp' signal is used + for thermal measurement. + +battery-type: + This shall be the battery manufacturing technology type, + allowed types are: + "UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn" + Example: + ab8500_battery: ab8500_battery { + stericsson,battery-type = "LIPO"; + } diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml new file mode 100644 index 000000000..525abdfb3 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AB8500 Battery Temperature Monitor + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: stericsson,ab8500-btemp + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to battery node + + battery: + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + + interrupts: + maxItems: 5 + + interrupt-names: + items: + - const: BAT_CTRL_INDB + - const: BTEMP_LOW + - const: BTEMP_HIGH + - const: BTEMP_LOW_MEDIUM + - const: BTEMP_MEDIUM_HIGH + + io-channels: + maxItems: 2 + + io-channel-names: + items: + - const: btemp_ball + - const: bat_ctrl + +required: + - compatible + - monitored-battery + - interrupts + - interrupt-names + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + battery-temperature { + compatible = "stericsson,ab8500-btemp"; + monitored-battery = <&battery>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "BAT_CTRL_INDB", + "BTEMP_LOW", + "BTEMP_HIGH", + "BTEMP_LOW_MEDIUM", + "BTEMP_MEDIUM_HIGH"; + io-channels = <&gpadc 0x02>, <&gpadc 0x01>; + io-channel-names = "btemp_ball", "bat_ctrl"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml new file mode 100644 index 000000000..10bbdcfc8 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AB8500 Charging Algorithm + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: stericsson,ab8500-chargalg + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to battery node + + battery: + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + +required: + - compatible + - monitored-battery + +additionalProperties: false + +examples: + - | + pmic { + charging-algorithm { + compatible = "stericsson,ab8500-chargalg"; + monitored-battery = <&ab8500_battery>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml new file mode 100644 index 000000000..e33329b3a --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AB8500 Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: stericsson,ab8500-charger + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to battery node + + battery: + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + + vddadc-supply: + description: Supply for USB and Main charger + + autopower_cfg: + type: boolean + description: automatic poweron after powerloss + + interrupts: + maxItems: 14 + + interrupt-names: + items: + - const: MAIN_CH_UNPLUG_DET + - const: MAIN_CHARGE_PLUG_DET + - const: MAIN_EXT_CH_NOT_OK + - const: MAIN_CH_TH_PROT_R + - const: MAIN_CH_TH_PROT_F + - const: VBUS_DET_F + - const: VBUS_DET_R + - const: USB_LINK_STATUS + - const: USB_CH_TH_PROT_R + - const: USB_CH_TH_PROT_F + - const: USB_CHARGER_NOT_OKR + - const: VBUS_OVV + - const: CH_WD_EXP + - const: VBUS_CH_DROP_END + + io-channels: + minItems: 2 + maxItems: 4 + + io-channel-names: + oneOf: + - items: + - const: main_charger_v + - const: main_charger_c + - const: vbus_v + - const: usb_charger_c + - items: + - const: vbus_v + - const: usb_charger_c + + +required: + - compatible + - monitored-battery + - vddadc-supply + - interrupts + - interrupt-names + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + charger { + compatible = "stericsson,ab8500-charger"; + monitored-battery = <&battery>; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <11 IRQ_TYPE_LEVEL_HIGH>, + <0 IRQ_TYPE_LEVEL_HIGH>, + <107 IRQ_TYPE_LEVEL_HIGH>, + <106 IRQ_TYPE_LEVEL_HIGH>, + <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>, + <105 IRQ_TYPE_LEVEL_HIGH>, + <104 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <22 IRQ_TYPE_LEVEL_HIGH>, + <21 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "MAIN_CH_UNPLUG_DET", + "MAIN_CHARGE_PLUG_DET", + "MAIN_EXT_CH_NOT_OK", + "MAIN_CH_TH_PROT_R", + "MAIN_CH_TH_PROT_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_CH_TH_PROT_R", + "USB_CH_TH_PROT_F", + "USB_CHARGER_NOT_OKR", + "VBUS_OVV", + "CH_WD_EXP", + "VBUS_CH_DROP_END"; + io-channels = <&gpadc 0x03>, + <&gpadc 0x0a>, + <&gpadc 0x09>, + <&gpadc 0x0b>; + io-channel-names = "main_charger_v", + "main_charger_c", + "vbus_v", + "usb_charger_c"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml new file mode 100644 index 000000000..6a724ca90 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2021 Sebastian Reichel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AB8500 Fuel Gauge + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: stericsson,ab8500-fg + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to battery node + + battery: + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + + line-impedance-micro-ohms: + description: The line impedance between the battery and the + AB8500 inputs, to compensate for this when determining internal + resistance. + + interrupts: + maxItems: 5 + + interrupt-names: + items: + - const: NCONV_ACCU + - const: BATT_OVV + - const: LOW_BAT_F + - const: CC_INT_CALIB + - const: CCEOC + + io-channels: + maxItems: 1 + + io-channel-names: + items: + - const: main_bat_v + +required: + - compatible + - monitored-battery + - interrupts + - interrupt-names + - io-channels + - io-channel-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + fuel-gauge { + compatible = "stericsson,ab8500-fg"; + monitored-battery = <&battery>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <8 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "NCONV_ACCU", + "BATT_OVV", + "LOW_BAT_F", + "CC_INT_CALIB", + "CCEOC"; + io-channels = <&gpadc 0x08>; + io-channel-names = "main_bat_v"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml new file mode 100644 index 000000000..2d552becb --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery charger driver for SMB345, SMB347 and SMB358 + +maintainers: + - David Heidelberg <david@ixit.cz> + - Dmitry Osipenko <digetx@gmail.com> + +properties: + compatible: + enum: + - summit,smb345 + - summit,smb347 + - summit,smb358 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + monitored-battery: + description: phandle to the battery node + $ref: /schemas/types.yaml#/definitions/phandle + + summit,enable-usb-charging: + type: boolean + description: Enable charging through USB. + + summit,enable-otg-charging: + type: boolean + description: Provide power for USB OTG + + summit,enable-mains-charging: + type: boolean + description: Enable charging through mains + + summit,enable-charge-control: + description: Enable charging control + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface) + - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low) + - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High) + + summit,fast-voltage-threshold-microvolt: + description: Voltage threshold to transit to fast charge mode (in uV) + minimum: 2400000 + maximum: 3000000 + + summit,mains-current-limit-microamp: + description: Maximum input current from AC/DC input (in uA) + + summit,usb-current-limit-microamp: + description: Maximum input current from USB input (in uA) + + summit,charge-current-compensation-microamp: + description: Charge current compensation (in uA) + + summit,chip-temperature-threshold-celsius: + description: Chip temperature for thermal regulation in °C. + enum: [100, 110, 120, 130] + + summit,soft-compensation-method: + description: Soft temperature limit compensation method + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none + - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation + - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation + + summit,inok-polarity: + description: | + Polarity of INOK signal indicating presence of external power supply. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # SMB3XX_SYSOK_INOK_ACTIVE_LOW + - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH + + usb-vbus: + $ref: /schemas/regulator/regulator.yaml# + type: object + + properties: + summit,needs-inok-toggle: + type: boolean + description: INOK signal is fixed and polarity needs to be toggled + in order to enable/disable output mode. + + unevaluatedProperties: false + +allOf: + - if: + properties: + compatible: + enum: + - summit,smb345 + - summit,smb358 + + then: + properties: + summit,mains-current-limit-microamp: + enum: [ 300000, 500000, 700000, 1000000, + 1500000, 1800000, 2000000] + + summit,usb-current-limit-microamp: + enum: [ 300000, 500000, 700000, 1000000, + 1500000, 1800000, 2000000] + + summit,charge-current-compensation-microamp: + enum: [200000, 450000, 600000, 900000] + + else: + properties: + summit,mains-current-limit-microamp: + enum: [ 300000, 500000, 700000, 900000, 1200000, + 1500000, 1800000, 2000000, 2200000, 2500000] + + summit,usb-current-limit-microamp: + enum: [ 300000, 500000, 700000, 900000, 1200000, + 1500000, 1800000, 2000000, 2200000, 2500000] + + summit,charge-current-compensation-microamp: + enum: [250000, 700000, 900000, 1200000] + +required: + - compatible + - reg + +anyOf: + - required: + - summit,enable-usb-charging + - required: + - summit,enable-otg-charging + - required: + - summit,enable-mains-charging + +additionalProperties: false + +examples: + - | + #include <dt-bindings/power/summit,smb347-charger.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@7f { + compatible = "summit,smb347"; + reg = <0x7f>; + + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>; + summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>; + summit,chip-temperature-threshold-celsius = <110>; + summit,mains-current-limit-microamp = <2000000>; + summit,usb-current-limit-microamp = <500000>; + summit,enable-usb-charging; + summit,enable-mains-charging; + + monitored-battery = <&battery>; + + usb-vbus { + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-min-microamp = <750000>; + regulator-max-microamp = <750000>; + summit,needs-inok-toggle; + }; + }; + }; + + battery: battery-cell { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <1800000>; + operating-range-celsius = <0 45>; + alert-celsius = <3 42>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml new file mode 100644 index 000000000..93654e732 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for TI/National Semiconductor LP8727 Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,lp8727 + + reg: + const: 0x27 + + interrupts: + maxItems: 1 + + debounce-ms: + description: interrupt debounce time in ms + +patternProperties: + '^(ac|usb)$': + type: object + description: USB/AC charging parameters + properties: + charger-type: + enum: + - ac + - usb + + eoc-level: + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 0 + maximum: 6 + description: | + End of Charge Percentage with the following mapping: + 0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50% + + charging-current: + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 0 + maximum: 9 + description: | + Charging current with the following mapping: + 0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA, + 6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + lp8727: charger@27 { + compatible = "ti,lp8727"; + reg = <0x27>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + debounce-ms = <300>; + + /* AC charger: 5% EOC and 500mA charging current */ + ac { + charger-type = "ac"; + eoc-level = /bits/ 8 <0>; + charging-current = /bits/ 8 <4>; + }; + + /* USB charger: 10% EOC and 400mA charging current */ + usb { + charger-type = "usb"; + eoc-level = /bits/ 8 <1>; + charging-current = /bits/ 8 <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml new file mode 100644 index 000000000..586745426 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/tps65090-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TPS65090 Frontend PMU with Switchmode Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,tps65090-charger + + ti,enable-low-current-chrg: + type: boolean + description: | + Enables charging when a low current is detected while the default logic is to stop charging. + +required: + - compatible + +additionalProperties: false + +examples: + - | + pmic { + charger { + compatible = "ti,tps65090-charger"; + ti,enable-low-current-chrg; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml new file mode 100644 index 000000000..7ccf0cdff --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/tps65217-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TPS65217 Charger + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,tps65217-charger + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + items: + - const: USB + - const: AC + +required: + - compatible + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + pmic { + charger { + compatible = "ti,tps65217-charger"; + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml new file mode 100644 index 000000000..d8d3154f9 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/twl4030-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TWL4030 BCI (Battery Charger Interface) + +description: | + The battery charger needs to interact with the USB phy in order to know when + charging is permissible, and when there is a connection or disconnection. + + The choice of phy cannot be configured at a hardware level, so there is no + value in explicit configuration in device-tree. Rather if there is a sibling + of the BCI node which is compatible with "ti,twl4030-usb", then that is used + to determine when and how use USB power for charging. + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + const: ti,twl4030-bci + + interrupts: + minItems: 2 + maxItems: 2 + + ti,bb-uvolt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: microvolts for charging the backup battery + + ti,bb-uamp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: microamps for charging the backup battery + + io-channels: + items: + - description: Accessory Charger Voltage Channel + + io-channel-names: + items: + - const: vac + + bci3v1-supply: + description: 3.1V USB regulator + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + - | + pmic { + charger { + compatible = "ti,twl4030-bci"; + interrupts = <9>, <2>; + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; + io-channels = <&twl_madc 11>; + io-channel-names = "vac"; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml new file mode 100644 index 000000000..5c8369fd3 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXP20x AC power-supply + +description: | + The AXP20X can read the current current and voltage supplied by AC by + reading ADC channels from the AXP20X ADC. The AXP22X is only able to + tell if an AC power supply is present and usable. AXP813/AXP803 are + able to limit current and supply voltage + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - const: x-powers,axp202-ac-power-supply + - const: x-powers,axp221-ac-power-supply + - items: + - const: x-powers,axp803-ac-power-supply + - const: x-powers,axp813-ac-power-supply + - const: x-powers,axp813-ac-power-supply + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml new file mode 100644 index 000000000..e0b95ecbb --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXP20x Battery power-supply + +description: | + The supported devices can read the battery voltage, charge and discharge + currents of the battery by reading ADC channels from the ADC. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - const: x-powers,axp202-battery-power-supply + - const: x-powers,axp209-battery-power-supply + - const: x-powers,axp221-battery-power-supply + - items: + - const: x-powers,axp803-battery-power-supply + - const: x-powers,axp813-battery-power-supply + - const: x-powers,axp813-battery-power-supply + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml new file mode 100644 index 000000000..3ce648dd9 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AXP20x USB power-supply + +description: | + The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight + variations such as the former being able to set the VBUS power supply max + current to 100mA, unlike the latter. + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Sebastian Reichel <sre@kernel.org> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - enum: + - x-powers,axp202-usb-power-supply + - x-powers,axp221-usb-power-supply + - x-powers,axp223-usb-power-supply + - x-powers,axp813-usb-power-supply + - items: + - const: x-powers,axp803-usb-power-supply + - const: x-powers,axp813-usb-power-supply + + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt new file mode 100644 index 000000000..21ef14d6a --- /dev/null +++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt @@ -0,0 +1,47 @@ +Texas Instruments SmartReflex binding + +SmartReflex is used to set and adjust the SoC operating points. + + +Required properties: + +compatible: Shall be one of the following: + "ti,omap3-smartreflex-core" + "ti,omap3-smartreflex-mpu-iva" + "ti,omap4-smartreflex-core" + "ti,omap4-smartreflex-mpu" + "ti,omap4-smartreflex-iva" + +reg: Shall contain the device instance IO range + +interrupts: Shall contain the device instance interrupt + + +Optional properties: + +ti,hwmods: Shall contain the TI interconnect module name if needed + by the SoC + + +Example: + + smartreflex_iva: smartreflex@4a0db000 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x4a0db000 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_iva"; + }; + + smartreflex_core: smartreflex@4a0dd000 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x4a0dd000 0x80>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_core"; + }; + + smartreflex_mpu: smartreflex@4a0d9000 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x4a0d9000 0x80>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_mpu"; + }; diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt new file mode 100644 index 000000000..cfd74659f --- /dev/null +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -0,0 +1,70 @@ +Specifying wakeup capability for devices +============================================ + +Any device nodes +---------------- +Nodes that describe devices which has wakeup capability must contain an +"wakeup-source" boolean property. + +Also, if device is marked as a wakeup source, then all the primary +interrupt(s) can be used as wakeup interrupt(s). + +However if the devices have dedicated interrupt as the wakeup source +then they need to specify/identify the same using device specific +interrupt name. In such cases only that interrupt can be used as wakeup +interrupt. + +List of legacy properties and respective binding document +--------------------------------------------------------- + +1. "enable-sdio-wakeup" Documentation/devicetree/bindings/mmc/mmc.txt +2. "gpio-key,wakeup" Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt +3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt +4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt + Documentation/devicetree/bindings/mfd/tc3589x.txt + Documentation/devicetree/bindings/input/touchscreen/ads7846.txt +5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt +6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt +7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt + +Examples +-------- + +1. With "wakeup" interrupt name + + device@10000 { + compatible = "vendor,device-id"; + reg = <0x10000 0x1000>; + interrupts = <0 19 4>, <0 21 4>, <0 22 4>; + interrupt-names = "ack", "err", "wakeup"; + wakeup-source; + }; + +2. Without "wakeup" interrupt name + + embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + wakeup-source; + }; + +3. Without interrupts + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce-interval = <50>; + wakeup-source; + linux,code = <116>; + label = "POWER"; + gpios = <&iofpga_gpio0 0 0x4>; + }; + [....] + }; diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt new file mode 100644 index 000000000..54b9f9d0f --- /dev/null +++ b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt @@ -0,0 +1,34 @@ +----------------------------------------------------------- +Device Tree Bindings for the Xilinx Zynq MPSoC PM domains +----------------------------------------------------------- +The binding for zynqmp-power-controller follow the common +generic PM domain binding[1]. + +[1] Documentation/devicetree/bindings/power/power-domain.yaml + +== Zynq MPSoC Generic PM Domain Node == + +Required property: + - Below property should be in zynqmp-firmware node. + - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1. + +Power domain ID indexes are mentioned in +include/dt-bindings/power/xlnx-zynqmp-power.h. + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + ... + #power-domain-cells = <1>; + ... + }; +}; + +sata { + ... + power-domains = <&zynqmp_firmware 28>; + ... +}; |