diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml new file mode 100644 index 000000000..60b49562f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung's Exynos USI (Universal Serial Interface) binding + +maintainers: + - Sam Protsenko <semen.protsenko@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C). + USI shares almost all internal circuits within each protocol, so only one + protocol can be chosen at a time. USI is modeled as a node with zero or more + child nodes, each representing a serial sub-node device. The mode setting + selects which particular function will be used. + +properties: + $nodename: + pattern: "^usi@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - const: samsung,exynosautov9-usi + - const: samsung,exynos850-usi + - enum: + - samsung,exynos850-usi + + reg: true + + clocks: true + + clock-names: true + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register syscon node + - description: offset of SW_CONF register for this USI controller + description: + Should be phandle/offset pair. The phandle to System Register syscon node + (for the same domain where this USI controller resides) and the offset + of SW_CONF register for this USI controller. + + samsung,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects USI function (which serial protocol to use). Refer to + <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values. + + samsung,clkreq-on: + type: boolean + description: + Enable this property if underlying protocol requires the clock to be + continuously provided without automatic gating. As suggested by SoC + manual, it should be set in case of SPI/I2C slave, UART Rx and I2C + multi-master mode. Usually this property is needed if USI mode is set + to "UART". + + This property is optional. + +patternProperties: + "^i2c@[0-9a-f]+$": + $ref: /schemas/i2c/i2c-exynos5.yaml + description: Child node describing underlying I2C + + "^serial@[0-9a-f]+$": + $ref: /schemas/serial/samsung_uart.yaml + description: Child node describing underlying UART/serial + + "^spi@[0-9a-f]+$": + $ref: /schemas/spi/samsung,spi.yaml + description: Child node describing underlying SPI + +required: + - compatible + - ranges + - "#address-cells" + - "#size-cells" + - samsung,sysreg + - samsung,mode + +if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-usi + +then: + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Bus (APB) clock + - description: Operating clock for UART/SPI/I2C protocol + + clock-names: + items: + - const: pclk + - const: ipclk + + required: + - reg + - clocks + - clock-names + +else: + properties: + reg: false + clocks: false + clock-names: false + samsung,clkreq-on: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/samsung,exynos-usi.h> + + usi0: usi@138200c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x138200c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1010>; + samsung,mode = <USI_V2_UART>; + samsung,clkreq-on; /* needed for UART mode */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "pclk", "ipclk"; + + serial_0: serial@13820000 { + compatible = "samsung,exynos850-uart"; + reg = <0x13820000 0xc0>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + hsi2c_0: i2c@13820000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x13820000 0xc0>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peri 31>, <&cmu_peri 32>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + }; |