summaryrefslogtreecommitdiffstats
path: root/Documentation/mhi/mhi.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/mhi/mhi.rst')
-rw-r--r--Documentation/mhi/mhi.rst218
1 files changed, 218 insertions, 0 deletions
diff --git a/Documentation/mhi/mhi.rst b/Documentation/mhi/mhi.rst
new file mode 100644
index 000000000..803ff84f7
--- /dev/null
+++ b/Documentation/mhi/mhi.rst
@@ -0,0 +1,218 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+MHI (Modem Host Interface)
+==========================
+
+This document provides information about the MHI protocol.
+
+Overview
+========
+
+MHI is a protocol developed by Qualcomm Innovation Center, Inc. It is used
+by the host processors to control and communicate with modem devices over high
+speed peripheral buses or shared memory. Even though MHI can be easily adapted
+to any peripheral buses, it is primarily used with PCIe based devices. MHI
+provides logical channels over the physical buses and allows transporting the
+modem protocols, such as IP data packets, modem control messages, and
+diagnostics over at least one of those logical channels. Also, the MHI
+protocol provides data acknowledgment feature and manages the power state of the
+modems via one or more logical channels.
+
+MHI Internals
+=============
+
+MMIO
+----
+
+MMIO (Memory mapped IO) consists of a set of registers in the device hardware,
+which are mapped to the host memory space by the peripheral buses like PCIe.
+Following are the major components of MMIO register space:
+
+MHI control registers: Access to MHI configurations registers
+
+MHI BHI registers: BHI (Boot Host Interface) registers are used by the host
+for downloading the firmware to the device before MHI initialization.
+
+Channel Doorbell array: Channel Doorbell (DB) registers used by the host to
+notify the device when there is new work to do.
+
+Event Doorbell array: Associated with event context array, the Event Doorbell
+(DB) registers are used by the host to notify the device when new events are
+available.
+
+Debug registers: A set of registers and counters used by the device to expose
+debugging information like performance, functional, and stability to the host.
+
+Data structures
+---------------
+
+All data structures used by MHI are in the host system memory. Using the
+physical interface, the device accesses those data structures. MHI data
+structures and data buffers in the host system memory regions are mapped for
+the device.
+
+Channel context array: All channel configurations are organized in channel
+context data array.
+
+Transfer rings: Used by the host to schedule work items for a channel. The
+transfer rings are organized as a circular queue of Transfer Descriptors (TD).
+
+Event context array: All event configurations are organized in the event context
+data array.
+
+Event rings: Used by the device to send completion and state transition messages
+to the host
+
+Command context array: All command configurations are organized in command
+context data array.
+
+Command rings: Used by the host to send MHI commands to the device. The command
+rings are organized as a circular queue of Command Descriptors (CD).
+
+Channels
+--------
+
+MHI channels are logical, unidirectional data pipes between a host and a device.
+The concept of channels in MHI is similar to endpoints in USB. MHI supports up
+to 256 channels. However, specific device implementations may support less than
+the maximum number of channels allowed.
+
+Two unidirectional channels with their associated transfer rings form a
+bidirectional data pipe, which can be used by the upper-layer protocols to
+transport application data packets (such as IP packets, modem control messages,
+diagnostics messages, and so on). Each channel is associated with a single
+transfer ring.
+
+Transfer rings
+--------------
+
+Transfers between the host and device are organized by channels and defined by
+Transfer Descriptors (TD). TDs are managed through transfer rings, which are
+defined for each channel between the device and host and reside in the host
+memory. TDs consist of one or more ring elements (or transfer blocks)::
+
+ [Read Pointer (RP)] ----------->[Ring Element] } TD
+ [Write Pointer (WP)]- [Ring Element]
+ - [Ring Element]
+ --------->[Ring Element]
+ [Ring Element]
+
+Below is the basic usage of transfer rings:
+
+* Host allocates memory for transfer ring.
+* Host sets the base pointer, read pointer, and write pointer in corresponding
+ channel context.
+* Ring is considered empty when RP == WP.
+* Ring is considered full when WP + 1 == RP.
+* RP indicates the next element to be serviced by the device.
+* When the host has a new buffer to send, it updates the ring element with
+ buffer information, increments the WP to the next element and rings the
+ associated channel DB.
+
+Event rings
+-----------
+
+Events from the device to host are organized in event rings and defined by Event
+Descriptors (ED). Event rings are used by the device to report events such as
+data transfer completion status, command completion status, and state changes
+to the host. Event rings are the array of EDs that resides in the host
+memory. EDs consist of one or more ring elements (or transfer blocks)::
+
+ [Read Pointer (RP)] ----------->[Ring Element] } ED
+ [Write Pointer (WP)]- [Ring Element]
+ - [Ring Element]
+ --------->[Ring Element]
+ [Ring Element]
+
+Below is the basic usage of event rings:
+
+* Host allocates memory for event ring.
+* Host sets the base pointer, read pointer, and write pointer in corresponding
+ channel context.
+* Both host and device has a local copy of RP, WP.
+* Ring is considered empty (no events to service) when WP + 1 == RP.
+* Ring is considered full of events when RP == WP.
+* When there is a new event the device needs to send, the device updates ED
+ pointed by RP, increments the RP to the next element and triggers the
+ interrupt.
+
+Ring Element
+------------
+
+A Ring Element is a data structure used to transfer a single block
+of data between the host and the device. Transfer ring element types contain a
+single buffer pointer, the size of the buffer, and additional control
+information. Other ring element types may only contain control and status
+information. For single buffer operations, a ring descriptor is composed of a
+single element. For large multi-buffer operations (such as scatter and gather),
+elements can be chained to form a longer descriptor.
+
+MHI Operations
+==============
+
+MHI States
+----------
+
+MHI_STATE_RESET
+~~~~~~~~~~~~~~~
+MHI is in reset state after power-up or hardware reset. The host is not allowed
+to access device MMIO register space.
+
+MHI_STATE_READY
+~~~~~~~~~~~~~~~
+MHI is ready for initialization. The host can start MHI initialization by
+programming MMIO registers.
+
+MHI_STATE_M0
+~~~~~~~~~~~~
+MHI is running and operational in the device. The host can start channels by
+issuing channel start command.
+
+MHI_STATE_M1
+~~~~~~~~~~~~
+MHI operation is suspended by the device. This state is entered when the
+device detects inactivity at the physical interface within a preset time.
+
+MHI_STATE_M2
+~~~~~~~~~~~~
+MHI is in low power state. MHI operation is suspended and the device may
+enter lower power mode.
+
+MHI_STATE_M3
+~~~~~~~~~~~~
+MHI operation stopped by the host. This state is entered when the host suspends
+MHI operation.
+
+MHI Initialization
+------------------
+
+After system boots, the device is enumerated over the physical interface.
+In the case of PCIe, the device is enumerated and assigned BAR-0 for
+the device's MMIO register space. To initialize the MHI in a device,
+the host performs the following operations:
+
+* Allocates the MHI context for event, channel and command arrays.
+* Initializes the context array, and prepares interrupts.
+* Waits until the device enters READY state.
+* Programs MHI MMIO registers and sets device into MHI_M0 state.
+* Waits for the device to enter M0 state.
+
+MHI Data Transfer
+-----------------
+
+MHI data transfer is initiated by the host to transfer data to the device.
+Following are the sequence of operations performed by the host to transfer
+data to device:
+
+* Host prepares TD with buffer information.
+* Host increments the WP of the corresponding channel transfer ring.
+* Host rings the channel DB register.
+* Device wakes up to process the TD.
+* Device generates a completion event for the processed TD by updating ED.
+* Device increments the RP of the corresponding event ring.
+* Device triggers IRQ to wake up the host.
+* Host wakes up and checks the event ring for completion event.
+* Host updates the WP of the corresponding event ring to indicate that the
+ data transfer has been completed successfully.
+