summaryrefslogtreecommitdiffstats
path: root/Documentation/scsi/ufs.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/scsi/ufs.rst')
-rw-r--r--Documentation/scsi/ufs.rst210
1 files changed, 210 insertions, 0 deletions
diff --git a/Documentation/scsi/ufs.rst b/Documentation/scsi/ufs.rst
new file mode 100644
index 000000000..885b1a736
--- /dev/null
+++ b/Documentation/scsi/ufs.rst
@@ -0,0 +1,210 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+Universal Flash Storage
+=======================
+
+
+.. Contents
+
+ 1. Overview
+ 2. UFS Architecture Overview
+ 2.1 Application Layer
+ 2.2 UFS Transport Protocol (UTP) layer
+ 2.3 UFS Interconnect (UIC) Layer
+ 3. UFSHCD Overview
+ 3.1 UFS controller initialization
+ 3.2 UTP Transfer requests
+ 3.3 UFS error handling
+ 3.4 SCSI Error handling
+ 4. BSG Support
+ 5. UFS Reference Clock Frequency configuration
+
+
+1. Overview
+===========
+
+Universal Flash Storage (UFS) is a storage specification for flash devices.
+It aims to provide a universal storage interface for both
+embedded and removable flash memory-based storage in mobile
+devices such as smart phones and tablet computers. The specification
+is defined by JEDEC Solid State Technology Association. UFS is based
+on the MIPI M-PHY physical layer standard. UFS uses MIPI M-PHY as the
+physical layer and MIPI Unipro as the link layer.
+
+The main goals of UFS are to provide:
+
+ * Optimized performance:
+
+ For UFS version 1.0 and 1.1 the target performance is as follows:
+
+ - Support for Gear1 is mandatory (rate A: 1248Mbps, rate B: 1457.6Mbps)
+ - Support for Gear2 is optional (rate A: 2496Mbps, rate B: 2915.2Mbps)
+
+ Future version of the standard,
+
+ - Gear3 (rate A: 4992Mbps, rate B: 5830.4Mbps)
+
+ * Low power consumption
+ * High random IOPs and low latency
+
+
+2. UFS Architecture Overview
+============================
+
+UFS has a layered communication architecture which is based on SCSI
+SAM-5 architectural model.
+
+UFS communication architecture consists of the following layers.
+
+2.1 Application Layer
+---------------------
+
+ The Application layer is composed of the UFS command set layer (UCS),
+ Task Manager and Device manager. The UFS interface is designed to be
+ protocol agnostic, however SCSI has been selected as a baseline
+ protocol for versions 1.0 and 1.1 of the UFS protocol layer.
+
+ UFS supports a subset of SCSI commands defined by SPC-4 and SBC-3.
+
+ * UCS:
+ It handles SCSI commands supported by UFS specification.
+ * Task manager:
+ It handles task management functions defined by the
+ UFS which are meant for command queue control.
+ * Device manager:
+ It handles device level operations and device
+ configuration operations. Device level operations mainly involve
+ device power management operations and commands to Interconnect
+ layers. Device level configurations involve handling of query
+ requests which are used to modify and retrieve configuration
+ information of the device.
+
+2.2 UFS Transport Protocol (UTP) layer
+--------------------------------------
+
+ The UTP layer provides services for
+ the higher layers through Service Access Points. UTP defines 3
+ service access points for higher layers.
+
+ * UDM_SAP: Device manager service access point is exposed to device
+ manager for device level operations. These device level operations
+ are done through query requests.
+ * UTP_CMD_SAP: Command service access point is exposed to UFS command
+ set layer (UCS) to transport commands.
+ * UTP_TM_SAP: Task management service access point is exposed to task
+ manager to transport task management functions.
+
+ UTP transports messages through UFS protocol information unit (UPIU).
+
+2.3 UFS Interconnect (UIC) Layer
+--------------------------------
+
+ UIC is the lowest layer of the UFS layered architecture. It handles
+ the connection between UFS host and UFS device. UIC consists of
+ MIPI UniPro and MIPI M-PHY. UIC provides 2 service access points
+ to upper layer:
+
+ * UIC_SAP: To transport UPIU between UFS host and UFS device.
+ * UIO_SAP: To issue commands to Unipro layers.
+
+
+3. UFSHCD Overview
+==================
+
+The UFS host controller driver is based on the Linux SCSI Framework.
+UFSHCD is a low-level device driver which acts as an interface between
+the SCSI Midlayer and PCIe-based UFS host controllers.
+
+The current UFSHCD implementation supports the following functionality:
+
+3.1 UFS controller initialization
+---------------------------------
+
+ The initialization module brings the UFS host controller to active state
+ and prepares the controller to transfer commands/responses between
+ UFSHCD and UFS device.
+
+3.2 UTP Transfer requests
+-------------------------
+
+ Transfer request handling module of UFSHCD receives SCSI commands
+ from the SCSI Midlayer, forms UPIUs and issues the UPIUs to the UFS Host
+ controller. Also, the module decodes responses received from the UFS
+ host controller in the form of UPIUs and intimates the SCSI Midlayer
+ of the status of the command.
+
+3.3 UFS error handling
+----------------------
+
+ Error handling module handles Host controller fatal errors,
+ Device fatal errors and UIC interconnect layer-related errors.
+
+3.4 SCSI Error handling
+-----------------------
+
+ This is done through UFSHCD SCSI error handling routines registered
+ with the SCSI Midlayer. Examples of some of the error handling commands
+ issues by the SCSI Midlayer are Abort task, LUN reset and host reset.
+ UFSHCD Routines to perform these tasks are registered with
+ SCSI Midlayer through .eh_abort_handler, .eh_device_reset_handler and
+ .eh_host_reset_handler.
+
+In this version of UFSHCD, Query requests and power management
+functionality are not implemented.
+
+4. BSG Support
+==============
+
+This transport driver supports exchanging UFS protocol information units
+(UPIUs) with a UFS device. Typically, user space will allocate
+struct ufs_bsg_request and struct ufs_bsg_reply (see ufs_bsg.h) as
+request_upiu and reply_upiu respectively. Filling those UPIUs should
+be done in accordance with JEDEC spec UFS2.1 paragraph 10.7.
+*Caveat emptor*: The driver makes no further input validations and sends the
+UPIU to the device as it is. Open the bsg device in /dev/ufs-bsg and
+send SG_IO with the applicable sg_io_v4::
+
+ io_hdr_v4.guard = 'Q';
+ io_hdr_v4.protocol = BSG_PROTOCOL_SCSI;
+ io_hdr_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_TRANSPORT;
+ io_hdr_v4.response = (__u64)reply_upiu;
+ io_hdr_v4.max_response_len = reply_len;
+ io_hdr_v4.request_len = request_len;
+ io_hdr_v4.request = (__u64)request_upiu;
+ if (dir == SG_DXFER_TO_DEV) {
+ io_hdr_v4.dout_xfer_len = (uint32_t)byte_cnt;
+ io_hdr_v4.dout_xferp = (uintptr_t)(__u64)buff;
+ } else {
+ io_hdr_v4.din_xfer_len = (uint32_t)byte_cnt;
+ io_hdr_v4.din_xferp = (uintptr_t)(__u64)buff;
+ }
+
+If you wish to read or write a descriptor, use the appropriate xferp of
+sg_io_v4.
+
+The userspace tool that interacts with the ufs-bsg endpoint and uses its
+UPIU-based protocol is available at:
+
+ https://github.com/westerndigitalcorporation/ufs-tool
+
+For more detailed information about the tool and its supported
+features, please see the tool's README.
+
+UFS specifications can be found at:
+
+- UFS - http://www.jedec.org/sites/default/files/docs/JESD220.pdf
+- UFSHCI - http://www.jedec.org/sites/default/files/docs/JESD223.pdf
+
+5. UFS Reference Clock Frequency configuration
+==============================================
+
+Devicetree can define a clock named "ref_clk" under the UFS controller node
+to specify the intended reference clock frequency for the UFS storage
+parts. ACPI-based system can specify the frequency using ACPI
+Device-Specific Data property named "ref-clk-freq". In both ways the value
+is interpreted as frequency in Hz and must match one of the values given in
+the UFS specification. UFS subsystem will attempt to read the value when
+executing common controller initialization. If the value is available, UFS
+subsytem will ensure the bRefClkFreq attribute of the UFS storage device is
+set accordingly and will modify it if there is a mismatch.