diff options
Diffstat (limited to 'arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts | 394 |
1 files changed, 394 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts new file mode 100644 index 000000000..f7a2430d6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts @@ -0,0 +1,394 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC8641 HPCN Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/include/ "mpc8641si-pre.dtsi" + +/ { + model = "MPC8641HPCN"; + compatible = "fsl,mpc8641hpcn"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; // 1G at 0x0 + }; + + lbc: localbus@ffe05000 { + reg = <0xffe05000 0x1000>; + + ranges = <0 0 0xef800000 0x00800000 + 2 0 0xffdf8000 0x00008000 + 3 0 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00300000>; + }; + partition@300000 { + label = "firmware b"; + reg = <0x00300000 0x00100000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <0x00400000 0x00300000>; + }; + partition@700000 { + label = "firmware a"; + reg = <0x00700000 0x00100000>; + read-only; + }; + }; + }; + + soc: soc8641@ffe00000 { + ranges = <0x00000000 0xffe00000 0x00100000>; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupts = <10 1 0 0>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupts = <10 1 0 0>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 53 2 0 0 /* msg1_tx_irq */ + 54 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 55 2 0 0 /* msg2_tx_irq */ + 56 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 49 2 0 0 /* bell_outb_irq */ + 50 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <48 2 0 0>; + }; + }; + }; + + pci0: pcie@ffe08000 { + reg = <0xffe08000 0x1000>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 func 0 - PCI slot 1 */ + 0x8800 0 0 1 &mpic 2 1 0 0 + 0x8800 0 0 2 &mpic 3 1 0 0 + 0x8800 0 0 3 &mpic 4 1 0 0 + 0x8800 0 0 4 &mpic 1 1 0 0 + + /* IDSEL 0x11 func 1 - PCI slot 1 */ + 0x8900 0 0 1 &mpic 2 1 0 0 + 0x8900 0 0 2 &mpic 3 1 0 0 + 0x8900 0 0 3 &mpic 4 1 0 0 + 0x8900 0 0 4 &mpic 1 1 0 0 + + /* IDSEL 0x11 func 2 - PCI slot 1 */ + 0x8a00 0 0 1 &mpic 2 1 0 0 + 0x8a00 0 0 2 &mpic 3 1 0 0 + 0x8a00 0 0 3 &mpic 4 1 0 0 + 0x8a00 0 0 4 &mpic 1 1 0 0 + + /* IDSEL 0x11 func 3 - PCI slot 1 */ + 0x8b00 0 0 1 &mpic 2 1 0 0 + 0x8b00 0 0 2 &mpic 3 1 0 0 + 0x8b00 0 0 3 &mpic 4 1 0 0 + 0x8b00 0 0 4 &mpic 1 1 0 0 + + /* IDSEL 0x11 func 4 - PCI slot 1 */ + 0x8c00 0 0 1 &mpic 2 1 0 0 + 0x8c00 0 0 2 &mpic 3 1 0 0 + 0x8c00 0 0 3 &mpic 4 1 0 0 + 0x8c00 0 0 4 &mpic 1 1 0 0 + + /* IDSEL 0x11 func 5 - PCI slot 1 */ + 0x8d00 0 0 1 &mpic 2 1 0 0 + 0x8d00 0 0 2 &mpic 3 1 0 0 + 0x8d00 0 0 3 &mpic 4 1 0 0 + 0x8d00 0 0 4 &mpic 1 1 0 0 + + /* IDSEL 0x11 func 6 - PCI slot 1 */ + 0x8e00 0 0 1 &mpic 2 1 0 0 + 0x8e00 0 0 2 &mpic 3 1 0 0 + 0x8e00 0 0 3 &mpic 4 1 0 0 + 0x8e00 0 0 4 &mpic 1 1 0 0 + + /* IDSEL 0x11 func 7 - PCI slot 1 */ + 0x8f00 0 0 1 &mpic 2 1 0 0 + 0x8f00 0 0 2 &mpic 3 1 0 0 + 0x8f00 0 0 3 &mpic 4 1 0 0 + 0x8f00 0 0 4 &mpic 1 1 0 0 + + /* IDSEL 0x12 func 0 - PCI slot 2 */ + 0x9000 0 0 1 &mpic 3 1 0 0 + 0x9000 0 0 2 &mpic 4 1 0 0 + 0x9000 0 0 3 &mpic 1 1 0 0 + 0x9000 0 0 4 &mpic 2 1 0 0 + + /* IDSEL 0x12 func 1 - PCI slot 2 */ + 0x9100 0 0 1 &mpic 3 1 0 0 + 0x9100 0 0 2 &mpic 4 1 0 0 + 0x9100 0 0 3 &mpic 1 1 0 0 + 0x9100 0 0 4 &mpic 2 1 0 0 + + /* IDSEL 0x12 func 2 - PCI slot 2 */ + 0x9200 0 0 1 &mpic 3 1 0 0 + 0x9200 0 0 2 &mpic 4 1 0 0 + 0x9200 0 0 3 &mpic 1 1 0 0 + 0x9200 0 0 4 &mpic 2 1 0 0 + + /* IDSEL 0x12 func 3 - PCI slot 2 */ + 0x9300 0 0 1 &mpic 3 1 0 0 + 0x9300 0 0 2 &mpic 4 1 0 0 + 0x9300 0 0 3 &mpic 1 1 0 0 + 0x9300 0 0 4 &mpic 2 1 0 0 + + /* IDSEL 0x12 func 4 - PCI slot 2 */ + 0x9400 0 0 1 &mpic 3 1 0 0 + 0x9400 0 0 2 &mpic 4 1 0 0 + 0x9400 0 0 3 &mpic 1 1 0 0 + 0x9400 0 0 4 &mpic 2 1 0 0 + + /* IDSEL 0x12 func 5 - PCI slot 2 */ + 0x9500 0 0 1 &mpic 3 1 0 0 + 0x9500 0 0 2 &mpic 4 1 0 0 + 0x9500 0 0 3 &mpic 1 1 0 0 + 0x9500 0 0 4 &mpic 2 1 0 0 + + /* IDSEL 0x12 func 6 - PCI slot 2 */ + 0x9600 0 0 1 &mpic 3 1 0 0 + 0x9600 0 0 2 &mpic 4 1 0 0 + 0x9600 0 0 3 &mpic 1 1 0 0 + 0x9600 0 0 4 &mpic 2 1 0 0 + + /* IDSEL 0x12 func 7 - PCI slot 2 */ + 0x9700 0 0 1 &mpic 3 1 0 0 + 0x9700 0 0 2 &mpic 4 1 0 0 + 0x9700 0 0 3 &mpic 1 1 0 0 + 0x9700 0 0 4 &mpic 2 1 0 0 + + // IDSEL 0x1c USB + 0xe000 0 0 1 &i8259 12 2 + 0xe100 0 0 2 &i8259 9 2 + 0xe200 0 0 3 &i8259 10 2 + 0xe300 0 0 4 &i8259 11 2 + + // IDSEL 0x1d Audio + 0xe800 0 0 1 &i8259 6 2 + + // IDSEL 0x1e Legacy + 0xf000 0 0 1 &i8259 7 2 + 0xf100 0 0 1 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0 0 1 &i8259 14 2 + 0xf900 0 0 1 &i8259 5 2 + >; + + pcie@0 { + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00010000>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00010000>; + isa@1e { + device_type = "isa"; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0 0 0 0>; + ranges = <1 0 0x01000000 0 0 + 0x00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 0x20 2 + 1 0xa0 2 + 1 0x4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 0x60 1 1 0x64 1>; + interrupts = <1 3 12 3>; + interrupt-parent = <&i8259>; + + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = + "pnpPNP,b00"; + reg = <1 0x70 2>; + }; + + gpio@400 { + reg = <1 0x400 0x80>; + }; + }; + }; + }; + + }; + + pci1: pcie@ffe09000 { + reg = <0xffe09000 0x1000>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>; + + pcie@0 { + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00010000>; + }; + }; +/* + * Only one of Rapid IO or PCI can be present due to HW limitations and + * due to the fact that the 2 now share address space in the new memory + * map. The most likely case is that we have PCI, so comment out the + * rapidio node. Leave it here for reference. + + rapidio@ffec0000 { + reg = <0xffec0000 0x11000>; + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + ranges = <0 0 0x80000000 0 0x20000000>; + }; + }; +*/ + +}; + +/include/ "mpc8641si-post.dtsi" |