diff options
Diffstat (limited to 'arch/powerpc/platforms/86xx/gef_sbc310.c')
| -rw-r--r-- | arch/powerpc/platforms/86xx/gef_sbc310.c | 196 |
1 files changed, 196 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c new file mode 100644 index 000000000..b5b273356 --- /dev/null +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * GE SBC310 board support + * + * Author: Martyn Welch <martyn.welch@ge.com> + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) + * Copyright 2006 Freescale Semiconductor Inc. + * + * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#include <asm/mpic.h> +#include <asm/nvram.h> + +#include <sysdev/fsl_pci.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/ge/ge_pic.h> + +#include "mpc86xx.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG (fmt...) do { printk(KERN_ERR "SBC310: " fmt); } while (0) +#else +#define DBG (fmt...) do { } while (0) +#endif + +void __iomem *sbc310_regs; + +static void __init gef_sbc310_init_irq(void) +{ + struct device_node *cascade_node = NULL; + + mpc86xx_init_irq(); + + /* + * There is a simple interrupt handler in the main FPGA, this needs + * to be cascaded into the MPIC + */ + cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic"); + if (!cascade_node) { + printk(KERN_WARNING "SBC310: No FPGA PIC\n"); + return; + } + + gef_pic_init(cascade_node); + of_node_put(cascade_node); +} + +static void __init gef_sbc310_setup_arch(void) +{ + struct device_node *regs; + printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n"); + +#ifdef CONFIG_SMP + mpc86xx_smp_init(); +#endif + + fsl_pci_assign_primary(); + + /* Remap basic board registers */ + regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); + if (regs) { + sbc310_regs = of_iomap(regs, 0); + if (sbc310_regs == NULL) + printk(KERN_WARNING "Unable to map board registers\n"); + of_node_put(regs); + } + +#if defined(CONFIG_MMIO_NVRAM) + mmio_nvram_init(); +#endif +} + +/* Return the PCB revision */ +static unsigned int gef_sbc310_get_board_id(void) +{ + unsigned int reg; + + reg = ioread32(sbc310_regs); + return reg & 0xff; +} + +/* Return the PCB revision */ +static unsigned int gef_sbc310_get_pcb_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc310_regs); + return (reg >> 8) & 0xff; +} + +/* Return the board (software) revision */ +static unsigned int gef_sbc310_get_board_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc310_regs); + return (reg >> 16) & 0xff; +} + +/* Return the FPGA revision */ +static unsigned int gef_sbc310_get_fpga_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc310_regs); + return (reg >> 24) & 0xf; +} + +static void gef_sbc310_show_cpuinfo(struct seq_file *m) +{ + uint svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); + + seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id()); + seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(), + ('A' + gef_sbc310_get_board_rev() - 1)); + seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc310_get_fpga_rev()); + + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + +} + +static void gef_sbc310_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + /* Do not do the fixup on other platforms! */ + if (!machine_is(gef_sbc310)) + return; + + printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); + + /* Ensure only ports 1 & 2 are enabled */ + pci_read_config_dword(pdev, 0xe0, &val); + pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2); + + /* System clock is 48-MHz Oscillator and EHCI Enabled. */ + pci_write_config_dword(pdev, 0xe4, 1 << 5); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + gef_sbc310_nec_fixup); + +/* + * Called very early, device-tree isn't unflattened + * + * This function is called to determine whether the BSP is compatible with the + * supplied device-tree, which is assumed to be the correct one for the actual + * board. It is expected that, in the future, a kernel may support multiple + * boards. + */ +static int __init gef_sbc310_probe(void) +{ + if (of_machine_is_compatible("gef,sbc310")) + return 1; + + return 0; +} + +machine_arch_initcall(gef_sbc310, mpc86xx_common_publish_devices); + +define_machine(gef_sbc310) { + .name = "GE SBC310", + .probe = gef_sbc310_probe, + .setup_arch = gef_sbc310_setup_arch, + .init_IRQ = gef_sbc310_init_irq, + .show_cpuinfo = gef_sbc310_show_cpuinfo, + .get_irq = mpic_get_irq, + .time_init = mpc86xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; |