diff options
Diffstat (limited to 'arch/powerpc/platforms/8xx/Kconfig')
| -rw-r--r-- | arch/powerpc/platforms/8xx/Kconfig | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig new file mode 100644 index 000000000..60cc5b537 --- /dev/null +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: GPL-2.0 +config CPM1 + bool + select CPM + +choice + prompt "8xx Machine Type" + depends on PPC_8xx + default MPC885ADS + +config MPC8XXFADS + bool "FADS" + +config MPC86XADS + bool "MPC86XADS" + select CPM1 + help + MPC86x Application Development System by Freescale Semiconductor. + The MPC86xADS is meant to serve as a platform for s/w and h/w + development around the MPC86X processor families. + +config MPC885ADS + bool "MPC885ADS" + select CPM1 + select OF_DYNAMIC + help + Freescale Semiconductor MPC885 Application Development System (ADS). + Also known as DUET. + The MPC885ADS is meant to serve as a platform for s/w and h/w + development around the MPC885 processor family. + +config PPC_EP88XC + bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)" + select CPM1 + help + This enables support for the Embedded Planet EP88xC board. + + This board is also resold by Freescale as the QUICCStart + MPC885 Evaluation System and/or the CWH-PPC-885XN-VE. + +config PPC_ADDER875 + bool "Analogue & Micro Adder 875" + select CPM1 + help + This enables support for the Analogue & Micro Adder 875 + board. + +config TQM8XX + bool "TQM8XX" + select CPM1 + help + support for the mpc8xx based boards from TQM. + +endchoice + +menu "Freescale Ethernet driver platform-specific options" + depends on (FS_ENET && MPC885ADS) + + config MPC8xx_SECOND_ETH + bool "Second Ethernet channel" + depends on MPC885ADS + default y + help + This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. + The latter will use SCC1, for 885ADS you can select it below. + + choice + prompt "Second Ethernet channel" + depends on MPC8xx_SECOND_ETH + default MPC8xx_SECOND_ETH_FEC2 + + config MPC8xx_SECOND_ETH_FEC2 + bool "FEC2" + depends on MPC885ADS + help + Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 + (often 2-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC3 + bool "SCC3" + depends on MPC885ADS + help + Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + endchoice + +endmenu + +# +# MPC8xx Communication options +# + +menu "MPC8xx CPM Options" + depends on PPC_8xx + +# This doesn't really belong here, but it is convenient to ask +# 8xx specific questions. +comment "Generic MPC8xx Options" + +config 8xx_GPIO + bool "GPIO API Support" + select GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + +config 8xx_CPU15 + bool "CPU15 Silicon Errata" + depends on !HUGETLB_PAGE + default y + help + This enables a workaround for erratum CPU15 on MPC8xx chips. + This bug can cause incorrect code execution under certain + circumstances. This workaround adds some overhead (a TLB miss + every time execution crosses a page boundary), and you may wish + to disable it if you have worked around the bug in the compiler + (by not placing conditional branches or branches to LR or CTR + in the last word of a page, with a target of the last cache + line in the next page), or if you have used some other + workaround. + + If in doubt, say Y here. + +choice + prompt "Microcode patch selection" + default NO_UCODE_PATCH + help + Help not implemented yet, coming soon. + +config NO_UCODE_PATCH + bool "None" + +config USB_SOF_UCODE_PATCH + bool "USB SOF patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_UCODE_PATCH + bool "I2C/SPI relocation patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_SMC1_UCODE_PATCH + bool "I2C/SPI/SMC1 relocation patch" + help + Help not implemented yet, coming soon. + +config SMC_UCODE_PATCH + bool "SMC relocation patch" + help + This microcode relocates SMC1 and SMC2 parameter RAMs at + offset 0x1ec0 and 0x1fc0 to allow extended parameter RAM + for SCC3 and SCC4. + +endchoice + +config UCODE_PATCH + bool + default y + depends on !NO_UCODE_PATCH + +menu "8xx advanced setup" + depends on PPC_8xx + +config PIN_TLB + bool "Pinned Kernel TLBs" + depends on ADVANCED_OPTIONS + help + On the 8xx, we have 32 instruction TLBs and 32 data TLBs. In each + table 4 TLBs can be pinned. + + It reduces the amount of usable TLBs to 28 (ie by 12%). That's the + reason why we make it selectable. + + This option does nothing, it just activate the selection of what + to pin. + +config PIN_TLB_DATA + bool "Pinned TLB for DATA" + depends on PIN_TLB + default y + help + This pins the first 32 Mbytes of memory with 8M pages. + +config PIN_TLB_IMMR + bool "Pinned TLB for IMMR" + depends on PIN_TLB + default y + help + This pins the IMMR area with a 512kbytes page. In case + CONFIG_PIN_TLB_DATA is also selected, it will reduce + CONFIG_PIN_TLB_DATA to 24 Mbytes. + +endmenu + +endmenu |