diff options
Diffstat (limited to 'drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c')
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c new file mode 100644 index 000000000..882546897 --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright (C) 2012 Invensense, Inc. +*/ + +#include <linux/pm_runtime.h> +#include "inv_mpu_iio.h" + +static unsigned int inv_scan_query_mpu6050(struct iio_dev *indio_dev) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + unsigned int mask; + + /* + * If the MPU6050 is just used as a trigger, then the scan mask + * is not allocated so we simply enable the temperature channel + * as a dummy and bail out. + */ + if (!indio_dev->active_scan_mask) { + st->chip_config.temp_fifo_enable = true; + return INV_MPU6050_SENSOR_TEMP; + } + + st->chip_config.gyro_fifo_enable = + test_bit(INV_MPU6050_SCAN_GYRO_X, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_GYRO_Y, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_GYRO_Z, + indio_dev->active_scan_mask); + + st->chip_config.accl_fifo_enable = + test_bit(INV_MPU6050_SCAN_ACCL_X, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_ACCL_Y, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_ACCL_Z, + indio_dev->active_scan_mask); + + st->chip_config.temp_fifo_enable = + test_bit(INV_MPU6050_SCAN_TEMP, indio_dev->active_scan_mask); + + mask = 0; + if (st->chip_config.gyro_fifo_enable) + mask |= INV_MPU6050_SENSOR_GYRO; + if (st->chip_config.accl_fifo_enable) + mask |= INV_MPU6050_SENSOR_ACCL; + if (st->chip_config.temp_fifo_enable) + mask |= INV_MPU6050_SENSOR_TEMP; + + return mask; +} + +static unsigned int inv_scan_query_mpu9x50(struct iio_dev *indio_dev) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + unsigned int mask; + + mask = inv_scan_query_mpu6050(indio_dev); + + /* no magnetometer if i2c auxiliary bus is used */ + if (st->magn_disabled) + return mask; + + st->chip_config.magn_fifo_enable = + test_bit(INV_MPU9X50_SCAN_MAGN_X, + indio_dev->active_scan_mask) || + test_bit(INV_MPU9X50_SCAN_MAGN_Y, + indio_dev->active_scan_mask) || + test_bit(INV_MPU9X50_SCAN_MAGN_Z, + indio_dev->active_scan_mask); + if (st->chip_config.magn_fifo_enable) + mask |= INV_MPU6050_SENSOR_MAGN; + + return mask; +} + +static unsigned int inv_scan_query(struct iio_dev *indio_dev) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + switch (st->chip_type) { + case INV_MPU9150: + case INV_MPU9250: + case INV_MPU9255: + return inv_scan_query_mpu9x50(indio_dev); + default: + return inv_scan_query_mpu6050(indio_dev); + } +} + +static unsigned int inv_compute_skip_samples(const struct inv_mpu6050_state *st) +{ + unsigned int skip_samples = 0; + + /* mag first sample is always not ready, skip it */ + if (st->chip_config.magn_fifo_enable) + skip_samples = 1; + + return skip_samples; +} + +int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable) +{ + uint8_t d; + int ret; + + if (enable) { + st->it_timestamp = 0; + /* reset FIFO */ + d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST; + ret = regmap_write(st->map, st->reg->user_ctrl, d); + if (ret) + return ret; + /* enable sensor output to FIFO */ + d = 0; + if (st->chip_config.gyro_fifo_enable) + d |= INV_MPU6050_BITS_GYRO_OUT; + if (st->chip_config.accl_fifo_enable) + d |= INV_MPU6050_BIT_ACCEL_OUT; + if (st->chip_config.temp_fifo_enable) + d |= INV_MPU6050_BIT_TEMP_OUT; + if (st->chip_config.magn_fifo_enable) + d |= INV_MPU6050_BIT_SLAVE_0; + ret = regmap_write(st->map, st->reg->fifo_en, d); + if (ret) + return ret; + /* enable FIFO reading */ + d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_EN; + ret = regmap_write(st->map, st->reg->user_ctrl, d); + if (ret) + return ret; + /* enable interrupt */ + ret = regmap_write(st->map, st->reg->int_enable, + INV_MPU6050_BIT_DATA_RDY_EN); + } else { + ret = regmap_write(st->map, st->reg->int_enable, 0); + if (ret) + return ret; + ret = regmap_write(st->map, st->reg->fifo_en, 0); + if (ret) + return ret; + /* restore user_ctrl for disabling FIFO reading */ + ret = regmap_write(st->map, st->reg->user_ctrl, + st->chip_config.user_ctrl); + } + + return ret; +} + +/** + * inv_mpu6050_set_enable() - enable chip functions. + * @indio_dev: Device driver instance. + * @enable: enable/disable + */ +static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + struct device *pdev = regmap_get_device(st->map); + unsigned int scan; + int result; + + if (enable) { + scan = inv_scan_query(indio_dev); + result = pm_runtime_resume_and_get(pdev); + if (result) + return result; + /* + * In case autosuspend didn't trigger, turn off first not + * required sensors. + */ + result = inv_mpu6050_switch_engine(st, false, ~scan); + if (result) + goto error_power_off; + result = inv_mpu6050_switch_engine(st, true, scan); + if (result) + goto error_power_off; + st->skip_samples = inv_compute_skip_samples(st); + result = inv_mpu6050_prepare_fifo(st, true); + if (result) + goto error_power_off; + } else { + result = inv_mpu6050_prepare_fifo(st, false); + if (result) + goto error_power_off; + pm_runtime_mark_last_busy(pdev); + pm_runtime_put_autosuspend(pdev); + } + + return 0; + +error_power_off: + pm_runtime_put_autosuspend(pdev); + return result; +} + +/** + * inv_mpu_data_rdy_trigger_set_state() - set data ready interrupt state + * @trig: Trigger instance + * @state: Desired trigger state + */ +static int inv_mpu_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int result; + + mutex_lock(&st->lock); + result = inv_mpu6050_set_enable(indio_dev, state); + mutex_unlock(&st->lock); + + return result; +} + +static const struct iio_trigger_ops inv_mpu_trigger_ops = { + .set_trigger_state = &inv_mpu_data_rdy_trigger_set_state, +}; + +int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type) +{ + int ret; + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + st->trig = devm_iio_trigger_alloc(&indio_dev->dev, + "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!st->trig) + return -ENOMEM; + + ret = devm_request_irq(&indio_dev->dev, st->irq, + &iio_trigger_generic_data_rdy_poll, + irq_type, + "inv_mpu", + st->trig); + if (ret) + return ret; + + st->trig->dev.parent = regmap_get_device(st->map); + st->trig->ops = &inv_mpu_trigger_ops; + iio_trigger_set_drvdata(st->trig, indio_dev); + + ret = devm_iio_trigger_register(&indio_dev->dev, st->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(st->trig); + + return 0; +} |