diff options
Diffstat (limited to 'drivers/iio/temperature/max31865.c')
-rw-r--r-- | drivers/iio/temperature/max31865.c | 351 |
1 files changed, 351 insertions, 0 deletions
diff --git a/drivers/iio/temperature/max31865.c b/drivers/iio/temperature/max31865.c new file mode 100644 index 000000000..29e23652b --- /dev/null +++ b/drivers/iio/temperature/max31865.c @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Copyright (c) Linumiz 2021 + * + * max31865.c - Maxim MAX31865 RTD-to-Digital Converter sensor driver + * + * Author: Navin Sankar Velliangiri <navin@linumiz.com> + */ + +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/property.h> +#include <linux/spi/spi.h> +#include <asm/unaligned.h> + +/* + * The MSB of the register value determines whether the following byte will + * be written or read. If it is 0, read will follow and if it is 1, write + * will follow. + */ +#define MAX31865_RD_WR_BIT BIT(7) + +#define MAX31865_CFG_VBIAS BIT(7) +#define MAX31865_CFG_1SHOT BIT(5) +#define MAX31865_3WIRE_RTD BIT(4) +#define MAX31865_FAULT_STATUS_CLEAR BIT(1) +#define MAX31865_FILTER_50HZ BIT(0) + +/* The MAX31865 registers */ +#define MAX31865_CFG_REG 0x00 +#define MAX31865_RTD_MSB 0x01 +#define MAX31865_FAULT_STATUS 0x07 + +#define MAX31865_FAULT_OVUV BIT(2) + +static const char max31865_show_samp_freq[] = "50 60"; + +static const struct iio_chan_spec max31865_channels[] = { + { /* RTD Temperature */ + .type = IIO_TEMP, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) + }, +}; + +struct max31865_data { + struct spi_device *spi; + struct mutex lock; + bool filter_50hz; + bool three_wire; + u8 buf[2] __aligned(IIO_DMA_MINALIGN); +}; + +static int max31865_read(struct max31865_data *data, u8 reg, + unsigned int read_size) +{ + return spi_write_then_read(data->spi, ®, 1, data->buf, read_size); +} + +static int max31865_write(struct max31865_data *data, size_t len) +{ + return spi_write(data->spi, data->buf, len); +} + +static int enable_bias(struct max31865_data *data) +{ + u8 cfg; + int ret; + + ret = max31865_read(data, MAX31865_CFG_REG, 1); + if (ret) + return ret; + + cfg = data->buf[0]; + + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; + data->buf[1] = cfg | MAX31865_CFG_VBIAS; + + return max31865_write(data, 2); +} + +static int disable_bias(struct max31865_data *data) +{ + u8 cfg; + int ret; + + ret = max31865_read(data, MAX31865_CFG_REG, 1); + if (ret) + return ret; + + cfg = data->buf[0]; + cfg &= ~MAX31865_CFG_VBIAS; + + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; + data->buf[1] = cfg; + + return max31865_write(data, 2); +} + +static int max31865_rtd_read(struct max31865_data *data, int *val) +{ + u8 reg; + int ret; + + /* Enable BIAS to start the conversion */ + ret = enable_bias(data); + if (ret) + return ret; + + /* wait 10.5ms before initiating the conversion */ + msleep(11); + + ret = max31865_read(data, MAX31865_CFG_REG, 1); + if (ret) + return ret; + + reg = data->buf[0]; + reg |= MAX31865_CFG_1SHOT | MAX31865_FAULT_STATUS_CLEAR; + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; + data->buf[1] = reg; + + ret = max31865_write(data, 2); + if (ret) + return ret; + + if (data->filter_50hz) { + /* 50Hz filter mode requires 62.5ms to complete */ + msleep(63); + } else { + /* 60Hz filter mode requires 52ms to complete */ + msleep(52); + } + + ret = max31865_read(data, MAX31865_RTD_MSB, 2); + if (ret) + return ret; + + *val = get_unaligned_be16(&data->buf) >> 1; + + return disable_bias(data); +} + +static int max31865_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max31865_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->lock); + ret = max31865_rtd_read(data, val); + mutex_unlock(&data->lock); + if (ret) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* Temp. Data resolution is 0.03125 degree centigrade */ + *val = 31; + *val2 = 250000; /* 1000 * 0.03125 */ + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int max31865_init(struct max31865_data *data) +{ + u8 cfg; + int ret; + + ret = max31865_read(data, MAX31865_CFG_REG, 1); + if (ret) + return ret; + + cfg = data->buf[0]; + + if (data->three_wire) + /* 3-wire RTD connection */ + cfg |= MAX31865_3WIRE_RTD; + + if (data->filter_50hz) + /* 50Hz noise rejection filter */ + cfg |= MAX31865_FILTER_50HZ; + + data->buf[0] = MAX31865_CFG_REG | MAX31865_RD_WR_BIT; + data->buf[1] = cfg; + + return max31865_write(data, 2); +} + +static ssize_t show_fault(struct device *dev, u8 faultbit, char *buf) +{ + int ret; + bool fault; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct max31865_data *data = iio_priv(indio_dev); + + ret = max31865_read(data, MAX31865_FAULT_STATUS, 1); + if (ret) + return ret; + + fault = data->buf[0] & faultbit; + + return sysfs_emit(buf, "%d\n", fault); +} + +static ssize_t show_fault_ovuv(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return show_fault(dev, MAX31865_FAULT_OVUV, buf); +} + +static ssize_t show_filter(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct max31865_data *data = iio_priv(indio_dev); + + return sysfs_emit(buf, "%d\n", data->filter_50hz ? 50 : 60); +} + +static ssize_t set_filter(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct max31865_data *data = iio_priv(indio_dev); + unsigned int freq; + int ret; + + ret = kstrtouint(buf, 10, &freq); + if (ret) + return ret; + + switch (freq) { + case 50: + data->filter_50hz = true; + break; + case 60: + data->filter_50hz = false; + break; + default: + return -EINVAL; + } + + mutex_lock(&data->lock); + ret = max31865_init(data); + mutex_unlock(&data->lock); + if (ret) + return ret; + + return len; +} + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(max31865_show_samp_freq); +static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0); +static IIO_DEVICE_ATTR(in_filter_notch_center_frequency, 0644, + show_filter, set_filter, 0); + +static struct attribute *max31865_attributes[] = { + &iio_dev_attr_fault_ovuv.dev_attr.attr, + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_filter_notch_center_frequency.dev_attr.attr, + NULL, +}; + +static const struct attribute_group max31865_group = { + .attrs = max31865_attributes, +}; + +static const struct iio_info max31865_info = { + .read_raw = max31865_read_raw, + .attrs = &max31865_group, +}; + +static int max31865_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + struct iio_dev *indio_dev; + struct max31865_data *data; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->spi = spi; + data->filter_50hz = false; + mutex_init(&data->lock); + + indio_dev->info = &max31865_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = max31865_channels; + indio_dev->num_channels = ARRAY_SIZE(max31865_channels); + + if (device_property_read_bool(&spi->dev, "maxim,3-wire")) { + /* select 3 wire */ + data->three_wire = 1; + } else { + /* select 2 or 4 wire */ + data->three_wire = 0; + } + + ret = max31865_init(data); + if (ret) { + dev_err(&spi->dev, "error: Failed to configure max31865\n"); + return ret; + } + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct spi_device_id max31865_id[] = { + { "max31865", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, max31865_id); + +static const struct of_device_id max31865_of_match[] = { + { .compatible = "maxim,max31865" }, + { } +}; +MODULE_DEVICE_TABLE(of, max31865_of_match); + +static struct spi_driver max31865_driver = { + .driver = { + .name = "max31865", + .of_match_table = max31865_of_match, + }, + .probe = max31865_probe, + .id_table = max31865_id, +}; +module_spi_driver(max31865_driver); + +MODULE_AUTHOR("Navin Sankar Velliangiri <navin@linumiz.com>"); +MODULE_DESCRIPTION("Maxim MAX31865 RTD-to-Digital Converter sensor driver"); +MODULE_LICENSE("GPL v2"); |