diff options
Diffstat (limited to 'drivers/mmc/host/alcor.c')
| -rw-r--r-- | drivers/mmc/host/alcor.c | 1192 |
1 files changed, 1192 insertions, 0 deletions
diff --git a/drivers/mmc/host/alcor.c b/drivers/mmc/host/alcor.c new file mode 100644 index 000000000..d01df01d4 --- /dev/null +++ b/drivers/mmc/host/alcor.c @@ -0,0 +1,1192 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Oleksij Rempel <linux@rempel-privat.de> + * + * Driver for Alcor Micro AU6601 and AU6621 controllers + */ + +/* Note: this driver was created without any documentation. Based + * on sniffing, testing and in some cases mimic of original driver. + * As soon as some one with documentation or more experience in SD/MMC, or + * reverse engineering then me, please review this driver and question every + * thing what I did. 2018 Oleksij Rempel <linux@rempel-privat.de> + */ + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/pm.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> + +#include <linux/alcor_pci.h> + +enum alcor_cookie { + COOKIE_UNMAPPED, + COOKIE_PRE_MAPPED, + COOKIE_MAPPED, +}; + +struct alcor_pll_conf { + unsigned int clk_src_freq; + unsigned int clk_src_reg; + unsigned int min_div; + unsigned int max_div; +}; + +struct alcor_sdmmc_host { + struct device *dev; + struct alcor_pci_priv *alcor_pci; + + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + unsigned int dma_on:1; + + struct mutex cmd_mutex; + + struct delayed_work timeout_work; + + struct sg_mapping_iter sg_miter; /* SG state for PIO */ + struct scatterlist *sg; + unsigned int blocks; /* remaining PIO blocks */ + int sg_count; + + u32 irq_status_sd; + unsigned char cur_power_mode; +}; + +static const struct alcor_pll_conf alcor_pll_cfg[] = { + /* MHZ, CLK src, max div, min div */ + { 31250000, AU6601_CLK_31_25_MHZ, 1, 511}, + { 48000000, AU6601_CLK_48_MHZ, 1, 511}, + {125000000, AU6601_CLK_125_MHZ, 1, 511}, + {384000000, AU6601_CLK_384_MHZ, 1, 511}, +}; + +static inline void alcor_rmw8(struct alcor_sdmmc_host *host, unsigned int addr, + u8 clear, u8 set) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + u32 var; + + var = alcor_read8(priv, addr); + var &= ~clear; + var |= set; + alcor_write8(priv, var, addr); +} + +/* As soon as irqs are masked, some status updates may be missed. + * Use this with care. + */ +static inline void alcor_mask_sd_irqs(struct alcor_sdmmc_host *host) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + + alcor_write32(priv, 0, AU6601_REG_INT_ENABLE); +} + +static inline void alcor_unmask_sd_irqs(struct alcor_sdmmc_host *host) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + + alcor_write32(priv, AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK | + AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE | + AU6601_INT_OVER_CURRENT_ERR, + AU6601_REG_INT_ENABLE); +} + +static void alcor_reset(struct alcor_sdmmc_host *host, u8 val) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + int i; + + alcor_write8(priv, val | AU6601_BUF_CTRL_RESET, + AU6601_REG_SW_RESET); + for (i = 0; i < 100; i++) { + if (!(alcor_read8(priv, AU6601_REG_SW_RESET) & val)) + return; + udelay(50); + } + dev_err(host->dev, "%s: timeout\n", __func__); +} + +/* + * Perform DMA I/O of a single page. + */ +static void alcor_data_set_dma(struct alcor_sdmmc_host *host) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + u32 addr; + + if (!host->sg_count) + return; + + if (!host->sg) { + dev_err(host->dev, "have blocks, but no SG\n"); + return; + } + + if (!sg_dma_len(host->sg)) { + dev_err(host->dev, "DMA SG len == 0\n"); + return; + } + + + addr = (u32)sg_dma_address(host->sg); + + alcor_write32(priv, addr, AU6601_REG_SDMA_ADDR); + host->sg = sg_next(host->sg); + host->sg_count--; +} + +static void alcor_trigger_data_transfer(struct alcor_sdmmc_host *host) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + struct mmc_data *data = host->data; + u8 ctrl = 0; + + if (data->flags & MMC_DATA_WRITE) + ctrl |= AU6601_DATA_WRITE; + + if (data->host_cookie == COOKIE_MAPPED) { + /* + * For DMA transfers, this function is called just once, + * at the start of the operation. The hardware can only + * perform DMA I/O on a single page at a time, so here + * we kick off the transfer with the first page, and expect + * subsequent pages to be transferred upon IRQ events + * indicating that the single-page DMA was completed. + */ + alcor_data_set_dma(host); + ctrl |= AU6601_DATA_DMA_MODE; + host->dma_on = 1; + alcor_write32(priv, data->sg_count * 0x1000, + AU6601_REG_BLOCK_SIZE); + } else { + /* + * For PIO transfers, we break down each operation + * into several sector-sized transfers. When one sector has + * complete, the IRQ handler will call this function again + * to kick off the transfer of the next sector. + */ + alcor_write32(priv, data->blksz, AU6601_REG_BLOCK_SIZE); + } + + alcor_write8(priv, ctrl | AU6601_DATA_START_XFER, + AU6601_DATA_XFER_CTRL); +} + +static void alcor_trf_block_pio(struct alcor_sdmmc_host *host, bool read) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + size_t blksize, len; + u8 *buf; + + if (!host->blocks) + return; + + if (host->dma_on) { + dev_err(host->dev, "configured DMA but got PIO request.\n"); + return; + } + + if (!!(host->data->flags & MMC_DATA_READ) != read) { + dev_err(host->dev, "got unexpected direction %i != %i\n", + !!(host->data->flags & MMC_DATA_READ), read); + } + + if (!sg_miter_next(&host->sg_miter)) + return; + + blksize = host->data->blksz; + len = min(host->sg_miter.length, blksize); + + dev_dbg(host->dev, "PIO, %s block size: 0x%zx\n", + read ? "read" : "write", blksize); + + host->sg_miter.consumed = len; + host->blocks--; + + buf = host->sg_miter.addr; + + if (read) + ioread32_rep(priv->iobase + AU6601_REG_BUFFER, buf, len >> 2); + else + iowrite32_rep(priv->iobase + AU6601_REG_BUFFER, buf, len >> 2); + + sg_miter_stop(&host->sg_miter); +} + +static void alcor_prepare_sg_miter(struct alcor_sdmmc_host *host) +{ + unsigned int flags = SG_MITER_ATOMIC; + struct mmc_data *data = host->data; + + if (data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); +} + +static void alcor_prepare_data(struct alcor_sdmmc_host *host, + struct mmc_command *cmd) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + struct mmc_data *data = cmd->data; + + if (!data) + return; + + + host->data = data; + host->data->bytes_xfered = 0; + host->blocks = data->blocks; + host->sg = data->sg; + host->sg_count = data->sg_count; + dev_dbg(host->dev, "prepare DATA: sg %i, blocks: %i\n", + host->sg_count, host->blocks); + + if (data->host_cookie != COOKIE_MAPPED) + alcor_prepare_sg_miter(host); + + alcor_write8(priv, 0, AU6601_DATA_XFER_CTRL); +} + +static void alcor_send_cmd(struct alcor_sdmmc_host *host, + struct mmc_command *cmd, bool set_timeout) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + unsigned long timeout = 0; + u8 ctrl = 0; + + host->cmd = cmd; + alcor_prepare_data(host, cmd); + + dev_dbg(host->dev, "send CMD. opcode: 0x%02x, arg; 0x%08x\n", + cmd->opcode, cmd->arg); + alcor_write8(priv, cmd->opcode | 0x40, AU6601_REG_CMD_OPCODE); + alcor_write32be(priv, cmd->arg, AU6601_REG_CMD_ARG); + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + ctrl = AU6601_CMD_NO_RESP; + break; + case MMC_RSP_R1: + ctrl = AU6601_CMD_6_BYTE_CRC; + break; + case MMC_RSP_R1B: + ctrl = AU6601_CMD_6_BYTE_CRC | AU6601_CMD_STOP_WAIT_RDY; + break; + case MMC_RSP_R2: + ctrl = AU6601_CMD_17_BYTE_CRC; + break; + case MMC_RSP_R3: + ctrl = AU6601_CMD_6_BYTE_WO_CRC; + break; + default: + dev_err(host->dev, "%s: cmd->flag (0x%02x) is not valid\n", + mmc_hostname(mmc_from_priv(host)), mmc_resp_type(cmd)); + break; + } + + if (set_timeout) { + if (!cmd->data && cmd->busy_timeout) + timeout = cmd->busy_timeout; + else + timeout = 10000; + + schedule_delayed_work(&host->timeout_work, + msecs_to_jiffies(timeout)); + } + + dev_dbg(host->dev, "xfer ctrl: 0x%02x; timeout: %lu\n", ctrl, timeout); + alcor_write8(priv, ctrl | AU6601_CMD_START_XFER, + AU6601_CMD_XFER_CTRL); +} + +static void alcor_request_complete(struct alcor_sdmmc_host *host, + bool cancel_timeout) +{ + struct mmc_request *mrq; + + /* + * If this work gets rescheduled while running, it will + * be run again afterwards but without any active request. + */ + if (!host->mrq) + return; + + if (cancel_timeout) + cancel_delayed_work(&host->timeout_work); + + mrq = host->mrq; + + host->mrq = NULL; + host->cmd = NULL; + host->data = NULL; + host->dma_on = 0; + + mmc_request_done(mmc_from_priv(host), mrq); +} + +static void alcor_finish_data(struct alcor_sdmmc_host *host) +{ + struct mmc_data *data; + + data = host->data; + host->data = NULL; + host->dma_on = 0; + + /* + * The specification states that the block count register must + * be updated, but it does not specify at what point in the + * data flow. That makes the register entirely useless to read + * back so we have to assume that nothing made it to the card + * in the event of an error. + */ + if (data->error) + data->bytes_xfered = 0; + else + data->bytes_xfered = data->blksz * data->blocks; + + /* + * Need to send CMD12 if - + * a) open-ended multiblock transfer (no CMD23) + * b) error in multiblock transfer + */ + if (data->stop && + (data->error || + !host->mrq->sbc)) { + + /* + * The controller needs a reset of internal state machines + * upon error conditions. + */ + if (data->error) + alcor_reset(host, AU6601_RESET_CMD | AU6601_RESET_DATA); + + alcor_unmask_sd_irqs(host); + alcor_send_cmd(host, data->stop, false); + return; + } + + alcor_request_complete(host, 1); +} + +static void alcor_err_irq(struct alcor_sdmmc_host *host, u32 intmask) +{ + dev_dbg(host->dev, "ERR IRQ %x\n", intmask); + + if (host->cmd) { + if (intmask & AU6601_INT_CMD_TIMEOUT_ERR) + host->cmd->error = -ETIMEDOUT; + else + host->cmd->error = -EILSEQ; + } + + if (host->data) { + if (intmask & AU6601_INT_DATA_TIMEOUT_ERR) + host->data->error = -ETIMEDOUT; + else + host->data->error = -EILSEQ; + + host->data->bytes_xfered = 0; + } + + alcor_reset(host, AU6601_RESET_CMD | AU6601_RESET_DATA); + alcor_request_complete(host, 1); +} + +static int alcor_cmd_irq_done(struct alcor_sdmmc_host *host, u32 intmask) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + + intmask &= AU6601_INT_CMD_END; + + if (!intmask) + return true; + + /* got CMD_END but no CMD is in progress, wake thread an process the + * error + */ + if (!host->cmd) + return false; + + if (host->cmd->flags & MMC_RSP_PRESENT) { + struct mmc_command *cmd = host->cmd; + + cmd->resp[0] = alcor_read32be(priv, AU6601_REG_CMD_RSP0); + dev_dbg(host->dev, "RSP0: 0x%04x\n", cmd->resp[0]); + if (host->cmd->flags & MMC_RSP_136) { + cmd->resp[1] = + alcor_read32be(priv, AU6601_REG_CMD_RSP1); + cmd->resp[2] = + alcor_read32be(priv, AU6601_REG_CMD_RSP2); + cmd->resp[3] = + alcor_read32be(priv, AU6601_REG_CMD_RSP3); + dev_dbg(host->dev, "RSP1,2,3: 0x%04x 0x%04x 0x%04x\n", + cmd->resp[1], cmd->resp[2], cmd->resp[3]); + } + + } + + host->cmd->error = 0; + + /* Processed actual command. */ + if (!host->data) + return false; + + alcor_trigger_data_transfer(host); + host->cmd = NULL; + return true; +} + +static void alcor_cmd_irq_thread(struct alcor_sdmmc_host *host, u32 intmask) +{ + intmask &= AU6601_INT_CMD_END; + + if (!intmask) + return; + + if (!host->cmd && intmask & AU6601_INT_CMD_END) { + dev_dbg(host->dev, "Got command interrupt 0x%08x even though no command operation was in progress.\n", + intmask); + } + + /* Processed actual command. */ + if (!host->data) + alcor_request_complete(host, 1); + else + alcor_trigger_data_transfer(host); + host->cmd = NULL; +} + +static int alcor_data_irq_done(struct alcor_sdmmc_host *host, u32 intmask) +{ + u32 tmp; + + intmask &= AU6601_INT_DATA_MASK; + + /* nothing here to do */ + if (!intmask) + return 1; + + /* we was too fast and got DATA_END after it was processed? + * lets ignore it for now. + */ + if (!host->data && intmask == AU6601_INT_DATA_END) + return 1; + + /* looks like an error, so lets handle it. */ + if (!host->data) + return 0; + + tmp = intmask & (AU6601_INT_READ_BUF_RDY | AU6601_INT_WRITE_BUF_RDY + | AU6601_INT_DMA_END); + switch (tmp) { + case 0: + break; + case AU6601_INT_READ_BUF_RDY: + alcor_trf_block_pio(host, true); + return 1; + case AU6601_INT_WRITE_BUF_RDY: + alcor_trf_block_pio(host, false); + return 1; + case AU6601_INT_DMA_END: + if (!host->sg_count) + break; + + alcor_data_set_dma(host); + break; + default: + dev_err(host->dev, "Got READ_BUF_RDY and WRITE_BUF_RDY at same time\n"); + break; + } + + if (intmask & AU6601_INT_DATA_END) { + if (!host->dma_on && host->blocks) { + alcor_trigger_data_transfer(host); + return 1; + } else { + return 0; + } + } + + return 1; +} + +static void alcor_data_irq_thread(struct alcor_sdmmc_host *host, u32 intmask) +{ + intmask &= AU6601_INT_DATA_MASK; + + if (!intmask) + return; + + if (!host->data) { + dev_dbg(host->dev, "Got data interrupt 0x%08x even though no data operation was in progress.\n", + intmask); + alcor_reset(host, AU6601_RESET_DATA); + return; + } + + if (alcor_data_irq_done(host, intmask)) + return; + + if ((intmask & AU6601_INT_DATA_END) || !host->blocks || + (host->dma_on && !host->sg_count)) + alcor_finish_data(host); +} + +static void alcor_cd_irq(struct alcor_sdmmc_host *host, u32 intmask) +{ + dev_dbg(host->dev, "card %s\n", + intmask & AU6601_INT_CARD_REMOVE ? "removed" : "inserted"); + + if (host->mrq) { + dev_dbg(host->dev, "cancel all pending tasks.\n"); + + if (host->data) + host->data->error = -ENOMEDIUM; + + if (host->cmd) + host->cmd->error = -ENOMEDIUM; + else + host->mrq->cmd->error = -ENOMEDIUM; + + alcor_request_complete(host, 1); + } + + mmc_detect_change(mmc_from_priv(host), msecs_to_jiffies(1)); +} + +static irqreturn_t alcor_irq_thread(int irq, void *d) +{ + struct alcor_sdmmc_host *host = d; + irqreturn_t ret = IRQ_HANDLED; + u32 intmask, tmp; + + mutex_lock(&host->cmd_mutex); + + intmask = host->irq_status_sd; + + /* some thing bad */ + if (unlikely(!intmask || AU6601_INT_ALL_MASK == intmask)) { + dev_dbg(host->dev, "unexpected IRQ: 0x%04x\n", intmask); + ret = IRQ_NONE; + goto exit; + } + + tmp = intmask & (AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK); + if (tmp) { + if (tmp & AU6601_INT_ERROR_MASK) + alcor_err_irq(host, tmp); + else { + alcor_cmd_irq_thread(host, tmp); + alcor_data_irq_thread(host, tmp); + } + intmask &= ~(AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK); + } + + if (intmask & (AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE)) { + alcor_cd_irq(host, intmask); + intmask &= ~(AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE); + } + + if (intmask & AU6601_INT_OVER_CURRENT_ERR) { + dev_warn(host->dev, + "warning: over current detected!\n"); + intmask &= ~AU6601_INT_OVER_CURRENT_ERR; + } + + if (intmask) + dev_dbg(host->dev, "got not handled IRQ: 0x%04x\n", intmask); + +exit: + mutex_unlock(&host->cmd_mutex); + alcor_unmask_sd_irqs(host); + return ret; +} + + +static irqreturn_t alcor_irq(int irq, void *d) +{ + struct alcor_sdmmc_host *host = d; + struct alcor_pci_priv *priv = host->alcor_pci; + u32 status, tmp; + irqreturn_t ret; + int cmd_done, data_done; + + status = alcor_read32(priv, AU6601_REG_INT_STATUS); + if (!status) + return IRQ_NONE; + + alcor_write32(priv, status, AU6601_REG_INT_STATUS); + + tmp = status & (AU6601_INT_READ_BUF_RDY | AU6601_INT_WRITE_BUF_RDY + | AU6601_INT_DATA_END | AU6601_INT_DMA_END + | AU6601_INT_CMD_END); + if (tmp == status) { + cmd_done = alcor_cmd_irq_done(host, tmp); + data_done = alcor_data_irq_done(host, tmp); + /* use fast path for simple tasks */ + if (cmd_done && data_done) { + ret = IRQ_HANDLED; + goto alcor_irq_done; + } + } + + host->irq_status_sd = status; + ret = IRQ_WAKE_THREAD; + alcor_mask_sd_irqs(host); +alcor_irq_done: + return ret; +} + +static void alcor_set_clock(struct alcor_sdmmc_host *host, unsigned int clock) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + int i, diff = 0x7fffffff, tmp_clock = 0; + u16 clk_src = 0; + u8 clk_div = 0; + + if (clock == 0) { + alcor_write16(priv, 0, AU6601_CLK_SELECT); + return; + } + + for (i = 0; i < ARRAY_SIZE(alcor_pll_cfg); i++) { + unsigned int tmp_div, tmp_diff; + const struct alcor_pll_conf *cfg = &alcor_pll_cfg[i]; + + tmp_div = DIV_ROUND_UP(cfg->clk_src_freq, clock); + if (cfg->min_div > tmp_div || tmp_div > cfg->max_div) + continue; + + tmp_clock = DIV_ROUND_UP(cfg->clk_src_freq, tmp_div); + tmp_diff = abs(clock - tmp_clock); + + if (tmp_diff < diff) { + diff = tmp_diff; + clk_src = cfg->clk_src_reg; + clk_div = tmp_div; + } + } + + clk_src |= ((clk_div - 1) << 8); + clk_src |= AU6601_CLK_ENABLE; + + dev_dbg(host->dev, "set freq %d cal freq %d, use div %d, mod %x\n", + clock, tmp_clock, clk_div, clk_src); + + alcor_write16(priv, clk_src, AU6601_CLK_SELECT); + +} + +static void alcor_set_timing(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + + if (ios->timing == MMC_TIMING_LEGACY) { + alcor_rmw8(host, AU6601_CLK_DELAY, + AU6601_CLK_POSITIVE_EDGE_ALL, 0); + } else { + alcor_rmw8(host, AU6601_CLK_DELAY, + 0, AU6601_CLK_POSITIVE_EDGE_ALL); + } +} + +static void alcor_set_bus_width(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + struct alcor_pci_priv *priv = host->alcor_pci; + + if (ios->bus_width == MMC_BUS_WIDTH_1) { + alcor_write8(priv, 0, AU6601_REG_BUS_CTRL); + } else if (ios->bus_width == MMC_BUS_WIDTH_4) { + alcor_write8(priv, AU6601_BUS_WIDTH_4BIT, + AU6601_REG_BUS_CTRL); + } else + dev_err(host->dev, "Unknown BUS mode\n"); + +} + +static int alcor_card_busy(struct mmc_host *mmc) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + struct alcor_pci_priv *priv = host->alcor_pci; + u8 status; + + /* Check whether dat[0:3] low */ + status = alcor_read8(priv, AU6601_DATA_PIN_STATE); + + return !(status & AU6601_BUS_STAT_DAT_MASK); +} + +static int alcor_get_cd(struct mmc_host *mmc) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + struct alcor_pci_priv *priv = host->alcor_pci; + u8 detect; + + detect = alcor_read8(priv, AU6601_DETECT_STATUS) + & AU6601_DETECT_STATUS_M; + /* check if card is present then send command and data */ + return (detect == AU6601_SD_DETECTED); +} + +static int alcor_get_ro(struct mmc_host *mmc) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + struct alcor_pci_priv *priv = host->alcor_pci; + u8 status; + + /* get write protect pin status */ + status = alcor_read8(priv, AU6601_INTERFACE_MODE_CTRL); + + return !!(status & AU6601_SD_CARD_WP); +} + +static void alcor_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + + mutex_lock(&host->cmd_mutex); + + host->mrq = mrq; + + /* check if card is present then send command and data */ + if (alcor_get_cd(mmc)) + alcor_send_cmd(host, mrq->cmd, true); + else { + mrq->cmd->error = -ENOMEDIUM; + alcor_request_complete(host, 1); + } + + mutex_unlock(&host->cmd_mutex); +} + +static void alcor_pre_req(struct mmc_host *mmc, + struct mmc_request *mrq) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + struct mmc_command *cmd = mrq->cmd; + struct scatterlist *sg; + unsigned int i, sg_len; + + if (!data || !cmd) + return; + + data->host_cookie = COOKIE_UNMAPPED; + + /* FIXME: looks like the DMA engine works only with CMD18 */ + if (cmd->opcode != MMC_READ_MULTIPLE_BLOCK + && cmd->opcode != MMC_WRITE_MULTIPLE_BLOCK) + return; + /* + * We don't do DMA on "complex" transfers, i.e. with + * non-word-aligned buffers or lengths. A future improvement + * could be made to use temporary DMA bounce-buffers when these + * requirements are not met. + * + * Also, we don't bother with all the DMA setup overhead for + * short transfers. + */ + if (data->blocks * data->blksz < AU6601_MAX_DMA_BLOCK_SIZE) + return; + + if (data->blksz & 3) + return; + + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->length != AU6601_MAX_DMA_BLOCK_SIZE) + return; + if (sg->offset != 0) + return; + } + + /* This data might be unmapped at this time */ + + sg_len = dma_map_sg(host->dev, data->sg, data->sg_len, + mmc_get_dma_dir(data)); + if (sg_len) + data->host_cookie = COOKIE_MAPPED; + + data->sg_count = sg_len; +} + +static void alcor_post_req(struct mmc_host *mmc, + struct mmc_request *mrq, + int err) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (!data) + return; + + if (data->host_cookie == COOKIE_MAPPED) { + dma_unmap_sg(host->dev, + data->sg, + data->sg_len, + mmc_get_dma_dir(data)); + } + + data->host_cookie = COOKIE_UNMAPPED; +} + +static void alcor_set_power_mode(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + struct alcor_pci_priv *priv = host->alcor_pci; + + switch (ios->power_mode) { + case MMC_POWER_OFF: + alcor_set_clock(host, ios->clock); + /* set all pins to input */ + alcor_write8(priv, 0, AU6601_OUTPUT_ENABLE); + /* turn of VDD */ + alcor_write8(priv, 0, AU6601_POWER_CONTROL); + break; + case MMC_POWER_UP: + break; + case MMC_POWER_ON: + /* This is most trickiest part. The order and timings of + * instructions seems to play important role. Any changes may + * confuse internal state engine if this HW. + * FIXME: If we will ever get access to documentation, then this + * part should be reviewed again. + */ + + /* enable SD card mode */ + alcor_write8(priv, AU6601_SD_CARD, + AU6601_ACTIVE_CTRL); + /* set signal voltage to 3.3V */ + alcor_write8(priv, 0, AU6601_OPT); + /* no documentation about clk delay, for now just try to mimic + * original driver. + */ + alcor_write8(priv, 0x20, AU6601_CLK_DELAY); + /* set BUS width to 1 bit */ + alcor_write8(priv, 0, AU6601_REG_BUS_CTRL); + /* set CLK first time */ + alcor_set_clock(host, ios->clock); + /* power on VDD */ + alcor_write8(priv, AU6601_SD_CARD, + AU6601_POWER_CONTROL); + /* wait until the CLK will get stable */ + mdelay(20); + /* set CLK again, mimic original driver. */ + alcor_set_clock(host, ios->clock); + + /* enable output */ + alcor_write8(priv, AU6601_SD_CARD, + AU6601_OUTPUT_ENABLE); + /* The clk will not work on au6621. We need to trigger data + * transfer. + */ + alcor_write8(priv, AU6601_DATA_WRITE, + AU6601_DATA_XFER_CTRL); + /* configure timeout. Not clear what exactly it means. */ + alcor_write8(priv, 0x7d, AU6601_TIME_OUT_CTRL); + mdelay(100); + break; + default: + dev_err(host->dev, "Unknown power parameter\n"); + } +} + +static void alcor_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + + mutex_lock(&host->cmd_mutex); + + dev_dbg(host->dev, "set ios. bus width: %x, power mode: %x\n", + ios->bus_width, ios->power_mode); + + if (ios->power_mode != host->cur_power_mode) { + alcor_set_power_mode(mmc, ios); + host->cur_power_mode = ios->power_mode; + } else { + alcor_set_timing(mmc, ios); + alcor_set_bus_width(mmc, ios); + alcor_set_clock(host, ios->clock); + } + + mutex_unlock(&host->cmd_mutex); +} + +static int alcor_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct alcor_sdmmc_host *host = mmc_priv(mmc); + + mutex_lock(&host->cmd_mutex); + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + alcor_rmw8(host, AU6601_OPT, AU6601_OPT_SD_18V, 0); + break; + case MMC_SIGNAL_VOLTAGE_180: + alcor_rmw8(host, AU6601_OPT, 0, AU6601_OPT_SD_18V); + break; + default: + /* No signal voltage switch required */ + break; + } + + mutex_unlock(&host->cmd_mutex); + return 0; +} + +static const struct mmc_host_ops alcor_sdc_ops = { + .card_busy = alcor_card_busy, + .get_cd = alcor_get_cd, + .get_ro = alcor_get_ro, + .post_req = alcor_post_req, + .pre_req = alcor_pre_req, + .request = alcor_request, + .set_ios = alcor_set_ios, + .start_signal_voltage_switch = alcor_signal_voltage_switch, +}; + +static void alcor_timeout_timer(struct work_struct *work) +{ + struct delayed_work *d = to_delayed_work(work); + struct alcor_sdmmc_host *host = container_of(d, struct alcor_sdmmc_host, + timeout_work); + mutex_lock(&host->cmd_mutex); + + dev_dbg(host->dev, "triggered timeout\n"); + if (host->mrq) { + dev_err(host->dev, "Timeout waiting for hardware interrupt.\n"); + + if (host->data) { + host->data->error = -ETIMEDOUT; + } else { + if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + host->mrq->cmd->error = -ETIMEDOUT; + } + + alcor_reset(host, AU6601_RESET_CMD | AU6601_RESET_DATA); + alcor_request_complete(host, 0); + } + + mutex_unlock(&host->cmd_mutex); +} + +static void alcor_hw_init(struct alcor_sdmmc_host *host) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + struct alcor_dev_cfg *cfg = priv->cfg; + + /* FIXME: This part is a mimics HW init of original driver. + * If we will ever get access to documentation, then this part + * should be reviewed again. + */ + + /* reset command state engine */ + alcor_reset(host, AU6601_RESET_CMD); + + alcor_write8(priv, 0, AU6601_DMA_BOUNDARY); + /* enable sd card mode */ + alcor_write8(priv, AU6601_SD_CARD, AU6601_ACTIVE_CTRL); + + /* set BUS width to 1 bit */ + alcor_write8(priv, 0, AU6601_REG_BUS_CTRL); + + /* reset data state engine */ + alcor_reset(host, AU6601_RESET_DATA); + /* Not sure if a voodoo with AU6601_DMA_BOUNDARY is really needed */ + alcor_write8(priv, 0, AU6601_DMA_BOUNDARY); + + alcor_write8(priv, 0, AU6601_INTERFACE_MODE_CTRL); + /* not clear what we are doing here. */ + alcor_write8(priv, 0x44, AU6601_PAD_DRIVE0); + alcor_write8(priv, 0x44, AU6601_PAD_DRIVE1); + alcor_write8(priv, 0x00, AU6601_PAD_DRIVE2); + + /* for 6601 - dma_boundary; for 6621 - dma_page_cnt + * exact meaning of this register is not clear. + */ + alcor_write8(priv, cfg->dma, AU6601_DMA_BOUNDARY); + + /* make sure all pins are set to input and VDD is off */ + alcor_write8(priv, 0, AU6601_OUTPUT_ENABLE); + alcor_write8(priv, 0, AU6601_POWER_CONTROL); + + alcor_write8(priv, AU6601_DETECT_EN, AU6601_DETECT_STATUS); + /* now we should be safe to enable IRQs */ + alcor_unmask_sd_irqs(host); +} + +static void alcor_hw_uninit(struct alcor_sdmmc_host *host) +{ + struct alcor_pci_priv *priv = host->alcor_pci; + + alcor_mask_sd_irqs(host); + alcor_reset(host, AU6601_RESET_CMD | AU6601_RESET_DATA); + + alcor_write8(priv, 0, AU6601_DETECT_STATUS); + + alcor_write8(priv, 0, AU6601_OUTPUT_ENABLE); + alcor_write8(priv, 0, AU6601_POWER_CONTROL); + + alcor_write8(priv, 0, AU6601_OPT); +} + +static void alcor_init_mmc(struct alcor_sdmmc_host *host) +{ + struct mmc_host *mmc = mmc_from_priv(host); + + mmc->f_min = AU6601_MIN_CLOCK; + mmc->f_max = AU6601_MAX_CLOCK; + mmc->ocr_avail = MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED + | MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 + | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50; + mmc->caps2 = MMC_CAP2_NO_SDIO; + mmc->ops = &alcor_sdc_ops; + + /* The hardware does DMA data transfer of 4096 bytes to/from a single + * buffer address. Scatterlists are not supported at the hardware + * level, however we can work with them at the driver level, + * provided that each segment is exactly 4096 bytes in size. + * Upon DMA completion of a single segment (signalled via IRQ), we + * immediately proceed to transfer the next segment from the + * scatterlist. + * + * The overall request is limited to 240 sectors, matching the + * original vendor driver. + */ + mmc->max_segs = AU6601_MAX_DMA_SEGMENTS; + mmc->max_seg_size = AU6601_MAX_DMA_BLOCK_SIZE; + mmc->max_blk_count = 240; + mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; + dma_set_max_seg_size(host->dev, mmc->max_seg_size); +} + +static int alcor_pci_sdmmc_drv_probe(struct platform_device *pdev) +{ + struct alcor_pci_priv *priv = pdev->dev.platform_data; + struct mmc_host *mmc; + struct alcor_sdmmc_host *host; + int ret; + + mmc = mmc_alloc_host(sizeof(*host), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "Can't allocate MMC\n"); + return -ENOMEM; + } + + host = mmc_priv(mmc); + host->dev = &pdev->dev; + host->cur_power_mode = MMC_POWER_UNDEFINED; + host->alcor_pci = priv; + + /* make sure irqs are disabled */ + alcor_write32(priv, 0, AU6601_REG_INT_ENABLE); + alcor_write32(priv, 0, AU6601_MS_INT_ENABLE); + + ret = devm_request_threaded_irq(&pdev->dev, priv->irq, + alcor_irq, alcor_irq_thread, IRQF_SHARED, + DRV_NAME_ALCOR_PCI_SDMMC, host); + + if (ret) { + dev_err(&pdev->dev, "Failed to get irq for data line\n"); + goto free_host; + } + + mutex_init(&host->cmd_mutex); + INIT_DELAYED_WORK(&host->timeout_work, alcor_timeout_timer); + + alcor_init_mmc(host); + alcor_hw_init(host); + + dev_set_drvdata(&pdev->dev, host); + ret = mmc_add_host(mmc); + if (ret) + goto free_host; + + return 0; + +free_host: + mmc_free_host(mmc); + return ret; +} + +static int alcor_pci_sdmmc_drv_remove(struct platform_device *pdev) +{ + struct alcor_sdmmc_host *host = dev_get_drvdata(&pdev->dev); + struct mmc_host *mmc = mmc_from_priv(host); + + if (cancel_delayed_work_sync(&host->timeout_work)) + alcor_request_complete(host, 0); + + alcor_hw_uninit(host); + mmc_remove_host(mmc); + mmc_free_host(mmc); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int alcor_pci_sdmmc_suspend(struct device *dev) +{ + struct alcor_sdmmc_host *host = dev_get_drvdata(dev); + + if (cancel_delayed_work_sync(&host->timeout_work)) + alcor_request_complete(host, 0); + + alcor_hw_uninit(host); + + return 0; +} + +static int alcor_pci_sdmmc_resume(struct device *dev) +{ + struct alcor_sdmmc_host *host = dev_get_drvdata(dev); + + alcor_hw_init(host); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(alcor_mmc_pm_ops, alcor_pci_sdmmc_suspend, + alcor_pci_sdmmc_resume); + +static const struct platform_device_id alcor_pci_sdmmc_ids[] = { + { + .name = DRV_NAME_ALCOR_PCI_SDMMC, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, alcor_pci_sdmmc_ids); + +static struct platform_driver alcor_pci_sdmmc_driver = { + .probe = alcor_pci_sdmmc_drv_probe, + .remove = alcor_pci_sdmmc_drv_remove, + .id_table = alcor_pci_sdmmc_ids, + .driver = { + .name = DRV_NAME_ALCOR_PCI_SDMMC, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .pm = &alcor_mmc_pm_ops + }, +}; +module_platform_driver(alcor_pci_sdmmc_driver); + +MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>"); +MODULE_DESCRIPTION("PCI driver for Alcor Micro AU6601 Secure Digital Host Controller Interface"); +MODULE_LICENSE("GPL"); |