diff options
Diffstat (limited to 'drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h')
| -rw-r--r-- | drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h | 318 |
1 files changed, 318 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h new file mode 100644 index 000000000..d9247a8f3 --- /dev/null +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h @@ -0,0 +1,318 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright(c) 2009-2012 Realtek Corporation.*/ + +#ifndef __RTL8723E_PWRSEQ_H__ +#define __RTL8723E_PWRSEQ_H__ + +#include "../pwrseqcmd.h" +/* + * Check document WM-20110607-Paul-RTL8723A_Power_Architecture-R02.vsd + * There are 6 HW Power States: + * 0: POFF--Power Off + * 1: PDN--Power Down + * 2: CARDEMU--Card Emulation + * 3: ACT--Active Mode + * 4: LPS--Low Power State + * 5: SUS--Suspend + * + * The transision from different states are defined below + * TRANS_CARDEMU_TO_ACT + * TRANS_ACT_TO_CARDEMU + * TRANS_CARDEMU_TO_SUS + * TRANS_SUS_TO_CARDEMU + * TRANS_CARDEMU_TO_PDN + * TRANS_ACT_TO_LPS + * TRANS_LPS_TO_ACT + * + * TRANS_END + */ + +#define RTL8723A_TRANS_CARDEMU_TO_ACT_STEPS 10 +#define RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS 10 +#define RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS 10 +#define RTL8723A_TRANS_SUS_TO_CARDEMU_STEPS 10 +#define RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS 10 +#define RTL8723A_TRANS_PDN_TO_CARDEMU_STEPS 10 +#define RTL8723A_TRANS_ACT_TO_LPS_STEPS 15 +#define RTL8723A_TRANS_LPS_TO_ACT_STEPS 15 +#define RTL8723A_TRANS_END_STEPS 1 + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }*/ + +#define RTL8723A_TRANS_CARDEMU_TO_ACT \ + /* disable SW LPS 0x04[10]=0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(2), 0},\ + /* wait till 0x04[17] = 1 power ready*/ \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)},\ + /* release WLON reset 0x04[16]=1*/ \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},\ + /* disable HWPDN 0x04[15]=0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},\ + /* disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0},\ + /* polling until return 0*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)},\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_ACT_TO_CARDEMU \ + /*0x1F[7:0] = 0 turn off RF*/ \ + {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \ + {0x004E, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/ +#define RTL8723A_TRANS_CARDEMU_TO_SUS \ + /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, \ + BIT(4)|BIT(3), (BIT(4)|BIT(3))},\ +/*0x04[12:11] = 2b'01 enable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK| \ + PWR_INTF_SDIO_MSK,\ + PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, \ + BIT(3)|BIT(4), BIT(3)}, \ +/*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, \ + PWR_CMD_WRITE, BIT(3)|BIT(4), \ + BIT(3)|BIT(4)}, \ +/*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_WRITE, BIT(0), BIT(0)}, \ +/*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_POLLING, BIT(1), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_SUS_TO_CARDEMU \ + /*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\ + PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0},\ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK,\ + PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)},\ + /*0x04[12:11] = 2b'00 disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_CARDEMU_TO_CARDDIS \ + /*0x04[12:11] = 2b'01 enable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \ + PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \ +/*0x04[10] = 1, enable SW LPS*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(2), BIT(2)}, \ +/*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_WRITE, BIT(0), BIT(0)}, \ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_POLLING, BIT(1), 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_CARDDIS_TO_CARDEMU\ +/*Set SDIO suspend local register*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_WRITE, BIT(0), 0}, \ + /*wait power state to suspend*/ \ + {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_POLLING, BIT(1), BIT(1)},\ + /*0x04[12:11] = 2b'00 disable WL suspend*/ \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(3)|BIT(4), 0},\ +/*PCIe DMA start*/ \ + {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0}, + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ +#define RTL8723A_TRANS_CARDEMU_TO_PDN \ + {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/\ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/ + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ +#define RTL8723A_TRANS_PDN_TO_CARDEMU \ + {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/ + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_ACT_TO_LPS \ + {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0xFF},/*PCIe DMA stop*/ \ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \ + /*Should be zero if no packet is transmitting*/ \ + {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, 0xFF, 0},\ + /*Should be zero if no packet is transmitting*/ \ + {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, 0xFF, 0},\ + /*Should be zero if no packet is transmitting*/ \ + {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, 0xFF, 0},\ + /*Should be zero if no packet is transmitting*/ \ + {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, 0xFF, 0},\ + /*CCK and OFDM are disabled,and clock are gated*/ \ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(0), 0},\ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/\ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(1), 0},/*Whole BB is reset*/ \ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(1), 0},/*check if removed later*/ \ + /*Respond TxOK to scheduler*/ \ + {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(5), BIT(5)},\ + +#define RTL8723A_TRANS_LPS_TO_ACT\ +/* format */ \ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ \ + {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO,\ + PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/\ + {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_USB_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/\ + {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/\ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/\ + /*. 0x08[4] = 0 switch TSF to 40M*/\ + {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(4), 0}, \ + /*Polling 0x109[7]=0 TSF in 40M*/\ + {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_POLLING, BIT(7), 0}, \ + /*. 0x29[7:6] = 2b'00 enable BB clock*/\ + {0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(6)|BIT(7), 0},\ + /*. 0x101[1] = 1*/\ + {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(1), BIT(1)},\ + /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\ + {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0xFF},\ + /*. 0x02[1:0] = 2b'11 enable BB macro*/\ + {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)},\ + {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \ + PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC,\ + PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/ + +/* format */ +/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */ + +#define RTL8723A_TRANS_END \ + {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\ + 0, PWR_CMD_END, 0, 0} + +extern struct wlan_pwr_cfg rtl8723A_power_on_flow + [RTL8723A_TRANS_CARDEMU_TO_ACT_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_radio_off_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_card_disable_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_card_enable_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_suspend_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_resume_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_hwpdn_flow + [RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS + + RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS + + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_enter_lps_flow + [RTL8723A_TRANS_ACT_TO_LPS_STEPS + RTL8723A_TRANS_END_STEPS]; +extern struct wlan_pwr_cfg rtl8723A_leave_lps_flow + [RTL8723A_TRANS_LPS_TO_ACT_STEPS + RTL8723A_TRANS_END_STEPS]; + +/* RTL8723 Power Configuration CMDs for PCIe interface */ +#define RTL8723_NIC_PWR_ON_FLOW rtl8723A_power_on_flow +#define RTL8723_NIC_RF_OFF_FLOW rtl8723A_radio_off_flow +#define RTL8723_NIC_DISABLE_FLOW rtl8723A_card_disable_flow +#define RTL8723_NIC_ENABLE_FLOW rtl8723A_card_enable_flow +#define RTL8723_NIC_SUSPEND_FLOW rtl8723A_suspend_flow +#define RTL8723_NIC_RESUME_FLOW rtl8723A_resume_flow +#define RTL8723_NIC_PDN_FLOW rtl8723A_hwpdn_flow +#define RTL8723_NIC_LPS_ENTER_FLOW rtl8723A_enter_lps_flow +#define RTL8723_NIC_LPS_LEAVE_FLOW rtl8723A_leave_lps_flow + +#endif |