diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_transport.c')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_transport.c | 2200 |
1 files changed, 2200 insertions, 0 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c new file mode 100644 index 000000000..e8a4750f6 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -0,0 +1,2200 @@ +/* + * SAS Transport Layer for MPT (Message Passing Technology) based controllers + * + * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c + * Copyright (C) 2012-2014 LSI Corporation + * Copyright (C) 2013-2014 Avago Technologies + * (mailto: MPT-FusionLinux.pdl@avagotech.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * NO WARRANTY + * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR + * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT + * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is + * solely responsible for determining the appropriateness of using and + * distributing the Program and assumes all risks associated with its + * exercise of rights under this Agreement, including but not limited to + * the risks and costs of program errors, damage to or loss of data, + * programs or equipment, and unavailability or interruption of operations. + + * DISCLAIMER OF LIABILITY + * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED + * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport_sas.h> +#include <scsi/scsi_dbg.h> + +#include "mpt3sas_base.h" + +/** + * _transport_get_port_id_by_sas_phy - get zone's port id that Phy belong to + * @phy: sas_phy object + * + * Return Port number + */ +static inline u8 +_transport_get_port_id_by_sas_phy(struct sas_phy *phy) +{ + u8 port_id = 0xFF; + struct hba_port *port = phy->hostdata; + + if (port) + port_id = port->port_id; + + return port_id; +} + +/** + * _transport_sas_node_find_by_sas_address - sas node search + * @ioc: per adapter object + * @sas_address: sas address of expander or sas host + * @port: hba port entry + * Context: Calling function should acquire ioc->sas_node_lock. + * + * Search for either hba phys or expander device based on handle, then returns + * the sas_node object. + */ +static struct _sas_node * +_transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address, struct hba_port *port) +{ + if (ioc->sas_hba.sas_address == sas_address) + return &ioc->sas_hba; + else + return mpt3sas_scsih_expander_find_by_sas_address(ioc, + sas_address, port); +} + +/** + * _transport_get_port_id_by_rphy - Get Port number from rphy object + * @ioc: per adapter object + * @rphy: sas_rphy object + * + * Returns Port number. + */ +static u8 +_transport_get_port_id_by_rphy(struct MPT3SAS_ADAPTER *ioc, + struct sas_rphy *rphy) +{ + struct _sas_node *sas_expander; + struct _sas_device *sas_device; + unsigned long flags; + u8 port_id = 0xFF; + + if (!rphy) + return port_id; + + if (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE || + rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_for_each_entry(sas_expander, + &ioc->sas_expander_list, list) { + if (sas_expander->rphy == rphy) { + port_id = sas_expander->port->port_id; + break; + } + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + } else if (rphy->identify.device_type == SAS_END_DEVICE) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); + if (sas_device) { + port_id = sas_device->port->port_id; + sas_device_put(sas_device); + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } + + return port_id; +} + +/** + * _transport_convert_phy_link_rate - + * @link_rate: link rate returned from mpt firmware + * + * Convert link_rate from mpi fusion into sas_transport form. + */ +static enum sas_linkrate +_transport_convert_phy_link_rate(u8 link_rate) +{ + enum sas_linkrate rc; + + switch (link_rate) { + case MPI2_SAS_NEG_LINK_RATE_1_5: + rc = SAS_LINK_RATE_1_5_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_3_0: + rc = SAS_LINK_RATE_3_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_6_0: + rc = SAS_LINK_RATE_6_0_GBPS; + break; + case MPI25_SAS_NEG_LINK_RATE_12_0: + rc = SAS_LINK_RATE_12_0_GBPS; + break; + case MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED: + rc = SAS_PHY_DISABLED; + break; + case MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED: + rc = SAS_LINK_RATE_FAILED; + break; + case MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR: + rc = SAS_SATA_PORT_SELECTOR; + break; + case MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS: + rc = SAS_PHY_RESET_IN_PROGRESS; + break; + + default: + case MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE: + case MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE: + rc = SAS_LINK_RATE_UNKNOWN; + break; + } + return rc; +} + +/** + * _transport_set_identify - set identify for phys and end devices + * @ioc: per adapter object + * @handle: device handle + * @identify: sas identify info + * + * Populates sas identify info. + * + * Return: 0 for success, non-zero for failure. + */ +static int +_transport_set_identify(struct MPT3SAS_ADAPTER *ioc, u16 handle, + struct sas_identify *identify) +{ + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2ConfigReply_t mpi_reply; + u32 device_info; + u32 ioc_status; + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + ioc_info(ioc, "%s: host reset in progress!\n", __func__); + return -EFAULT; + } + + if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -ENXIO; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + ioc_err(ioc, "handle(0x%04x), ioc_status(0x%04x) failure at %s:%d/%s()!\n", + handle, ioc_status, __FILE__, __LINE__, __func__); + return -EIO; + } + + memset(identify, 0, sizeof(struct sas_identify)); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + + /* sas_address */ + identify->sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + + /* phy number of the parent device this device is linked to */ + identify->phy_identifier = sas_device_pg0.PhyNum; + + /* device_type */ + switch (device_info & MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { + case MPI2_SAS_DEVICE_INFO_NO_DEVICE: + identify->device_type = SAS_PHY_UNUSED; + break; + case MPI2_SAS_DEVICE_INFO_END_DEVICE: + identify->device_type = SAS_END_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER: + identify->device_type = SAS_EDGE_EXPANDER_DEVICE; + break; + case MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER: + identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; + break; + } + + /* initiator_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_HOST) + identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; + + /* target_port_protocols */ + if (device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SSP; + if (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_STP; + if (device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SMP; + if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + identify->target_port_protocols |= SAS_PROTOCOL_SATA; + + return 0; +} + +/** + * mpt3sas_transport_done - internal transport layer callback handler. + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Callback handler when sending internal generated transport cmds. + * The callback index passed is `ioc->transport_cb_idx` + * + * Return: 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + + mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); + if (ioc->transport_cmds.status == MPT3_CMD_NOT_USED) + return 1; + if (ioc->transport_cmds.smid != smid) + return 1; + ioc->transport_cmds.status |= MPT3_CMD_COMPLETE; + if (mpi_reply) { + memcpy(ioc->transport_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + ioc->transport_cmds.status |= MPT3_CMD_REPLY_VALID; + } + ioc->transport_cmds.status &= ~MPT3_CMD_PENDING; + complete(&ioc->transport_cmds.done); + return 1; +} + +/* report manufacture request structure */ +struct rep_manu_request { + u8 smp_frame_type; + u8 function; + u8 reserved; + u8 request_length; +}; + +/* report manufacture reply structure */ +struct rep_manu_reply { + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x01 */ + u8 function_result; + u8 response_length; + u16 expander_change_count; + u8 reserved0[2]; + u8 sas_format; + u8 reserved2[3]; + u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; + u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; + u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; + u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; + u16 component_id; + u8 component_revision_id; + u8 reserved3; + u8 vendor_specific[8]; +}; + +/** + * _transport_expander_report_manufacture - obtain SMP report_manufacture + * @ioc: per adapter object + * @sas_address: expander sas address + * @edev: the sas_expander_device object + * @port_id: Port ID number + * + * Fills in the sas_expander_device object when SMP port is created. + * + * Return: 0 for success, non-zero for failure. + */ +static int +_transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address, struct sas_expander_device *edev, u8 port_id) +{ + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + struct rep_manu_reply *manufacture_reply; + struct rep_manu_request *manufacture_request; + int rc; + u16 smid; + void *psge; + u8 issue_reset = 0; + void *data_out = NULL; + dma_addr_t data_out_dma; + dma_addr_t data_in_dma; + size_t data_in_sz; + size_t data_out_sz; + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + ioc_info(ioc, "%s: host reset in progress!\n", __func__); + return -EFAULT; + } + + mutex_lock(&ioc->transport_cmds.mutex); + + if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { + ioc_err(ioc, "%s: transport_cmds in use\n", __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT3_CMD_PENDING; + + rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); + if (rc) + goto out; + + smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); + rc = -EAGAIN; + goto out; + } + + rc = 0; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + data_out_sz = sizeof(struct rep_manu_request); + data_in_sz = sizeof(struct rep_manu_reply); + data_out = dma_alloc_coherent(&ioc->pdev->dev, data_out_sz + data_in_sz, + &data_out_dma, GFP_KERNEL); + if (!data_out) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + rc = -ENOMEM; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + + data_in_dma = data_out_dma + sizeof(struct rep_manu_request); + + manufacture_request = data_out; + manufacture_request->smp_frame_type = 0x40; + manufacture_request->function = 1; + manufacture_request->reserved = 0; + manufacture_request->request_length = 0; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = port_id; + mpi_request->SASAddress = cpu_to_le64(sas_address); + mpi_request->RequestDataLength = cpu_to_le16(data_out_sz); + psge = &mpi_request->SGL; + + ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma, + data_in_sz); + + dtransportprintk(ioc, + ioc_info(ioc, "report_manufacture - send to sas_addr(0x%016llx)\n", + (u64)sas_address)); + init_completion(&ioc->transport_cmds.done); + ioc->put_smid_default(ioc, smid); + wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); + + if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { + ioc_err(ioc, "%s: timeout\n", __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, ioc_info(ioc, "report_manufacture - complete\n")); + + if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { + u8 *tmp; + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, + ioc_info(ioc, "report_manufacture - reply data transfer size(%d)\n", + le16_to_cpu(mpi_reply->ResponseDataLength))); + + if (le16_to_cpu(mpi_reply->ResponseDataLength) != + sizeof(struct rep_manu_reply)) + goto out; + + manufacture_reply = data_out + sizeof(struct rep_manu_request); + strncpy(edev->vendor_id, manufacture_reply->vendor_id, + SAS_EXPANDER_VENDOR_ID_LEN); + strncpy(edev->product_id, manufacture_reply->product_id, + SAS_EXPANDER_PRODUCT_ID_LEN); + strncpy(edev->product_rev, manufacture_reply->product_rev, + SAS_EXPANDER_PRODUCT_REV_LEN); + edev->level = manufacture_reply->sas_format & 1; + if (edev->level) { + strncpy(edev->component_vendor_id, + manufacture_reply->component_vendor_id, + SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); + tmp = (u8 *)&manufacture_reply->component_id; + edev->component_id = tmp[0] << 8 | tmp[1]; + edev->component_revision_id = + manufacture_reply->component_revision_id; + } + } else + dtransportprintk(ioc, + ioc_info(ioc, "report_manufacture - no reply\n")); + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); + out: + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + if (data_out) + dma_free_coherent(&ioc->pdev->dev, data_out_sz + data_in_sz, + data_out, data_out_dma); + + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + + +/** + * _transport_delete_port - helper function to removing a port + * @ioc: per adapter object + * @mpt3sas_port: mpt3sas per port object + */ +static void +_transport_delete_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_port *mpt3sas_port) +{ + u64 sas_address = mpt3sas_port->remote_identify.sas_address; + struct hba_port *port = mpt3sas_port->hba_port; + enum sas_device_type device_type = + mpt3sas_port->remote_identify.device_type; + + dev_printk(KERN_INFO, &mpt3sas_port->port->dev, + "remove: sas_addr(0x%016llx)\n", + (unsigned long long) sas_address); + + ioc->logging_level |= MPT_DEBUG_TRANSPORT; + if (device_type == SAS_END_DEVICE) + mpt3sas_device_remove_by_sas_address(ioc, + sas_address, port); + else if (device_type == SAS_EDGE_EXPANDER_DEVICE || + device_type == SAS_FANOUT_EXPANDER_DEVICE) + mpt3sas_expander_remove(ioc, sas_address, port); + ioc->logging_level &= ~MPT_DEBUG_TRANSPORT; +} + +/** + * _transport_delete_phy - helper function to removing single phy from port + * @ioc: per adapter object + * @mpt3sas_port: mpt3sas per port object + * @mpt3sas_phy: mpt3sas per phy object + */ +static void +_transport_delete_phy(struct MPT3SAS_ADAPTER *ioc, + struct _sas_port *mpt3sas_port, struct _sas_phy *mpt3sas_phy) +{ + u64 sas_address = mpt3sas_port->remote_identify.sas_address; + + dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, + "remove: sas_addr(0x%016llx), phy(%d)\n", + (unsigned long long) sas_address, mpt3sas_phy->phy_id); + + list_del(&mpt3sas_phy->port_siblings); + mpt3sas_port->num_phys--; + sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy); + mpt3sas_phy->phy_belongs_to_port = 0; +} + +/** + * _transport_add_phy - helper function to adding single phy to port + * @ioc: per adapter object + * @mpt3sas_port: mpt3sas per port object + * @mpt3sas_phy: mpt3sas per phy object + */ +static void +_transport_add_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_port *mpt3sas_port, + struct _sas_phy *mpt3sas_phy) +{ + u64 sas_address = mpt3sas_port->remote_identify.sas_address; + + dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, + "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long) + sas_address, mpt3sas_phy->phy_id); + + list_add_tail(&mpt3sas_phy->port_siblings, &mpt3sas_port->phy_list); + mpt3sas_port->num_phys++; + sas_port_add_phy(mpt3sas_port->port, mpt3sas_phy->phy); + mpt3sas_phy->phy_belongs_to_port = 1; +} + +/** + * mpt3sas_transport_add_phy_to_an_existing_port - adding new phy to existing port + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @mpt3sas_phy: mpt3sas per phy object + * @sas_address: sas address of device/expander were phy needs to be added to + * @port: hba port entry + */ +void +mpt3sas_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy, + u64 sas_address, struct hba_port *port) +{ + struct _sas_port *mpt3sas_port; + struct _sas_phy *phy_srch; + + if (mpt3sas_phy->phy_belongs_to_port == 1) + return; + + if (!port) + return; + + list_for_each_entry(mpt3sas_port, &sas_node->sas_port_list, + port_list) { + if (mpt3sas_port->remote_identify.sas_address != + sas_address) + continue; + if (mpt3sas_port->hba_port != port) + continue; + list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, + port_siblings) { + if (phy_srch == mpt3sas_phy) + return; + } + _transport_add_phy(ioc, mpt3sas_port, mpt3sas_phy); + return; + } + +} + +/** + * mpt3sas_transport_del_phy_from_an_existing_port - delete phy from existing port + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @mpt3sas_phy: mpt3sas per phy object + */ +void +mpt3sas_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy) +{ + struct _sas_port *mpt3sas_port, *next; + struct _sas_phy *phy_srch; + + if (mpt3sas_phy->phy_belongs_to_port == 0) + return; + + list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, + port_list) { + list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, + port_siblings) { + if (phy_srch != mpt3sas_phy) + continue; + + /* + * Don't delete port during host reset, + * just delete phy. + */ + if (mpt3sas_port->num_phys == 1 && !ioc->shost_recovery) + _transport_delete_port(ioc, mpt3sas_port); + else + _transport_delete_phy(ioc, mpt3sas_port, + mpt3sas_phy); + return; + } + } +} + +/** + * _transport_sanity_check - sanity check when adding a new port + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @sas_address: sas address of device being added + * @port: hba port entry + * + * See the explanation above from _transport_delete_duplicate_port + */ +static void +_transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, + u64 sas_address, struct hba_port *port) +{ + int i; + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address != sas_address) + continue; + if (sas_node->phy[i].port != port) + continue; + if (sas_node->phy[i].phy_belongs_to_port == 1) + mpt3sas_transport_del_phy_from_an_existing_port(ioc, + sas_node, &sas_node->phy[i]); + } +} + +/** + * mpt3sas_transport_port_add - insert port to the list + * @ioc: per adapter object + * @handle: handle of attached device + * @sas_address: sas address of parent expander or sas host + * @hba_port: hba port entry + * Context: This function will acquire ioc->sas_node_lock. + * + * Adding new port object to the sas_node->sas_port_list. + * + * Return: mpt3sas_port. + */ +struct _sas_port * +mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, + u64 sas_address, struct hba_port *hba_port) +{ + struct _sas_phy *mpt3sas_phy, *next; + struct _sas_port *mpt3sas_port; + unsigned long flags; + struct _sas_node *sas_node; + struct sas_rphy *rphy; + struct _sas_device *sas_device = NULL; + int i; + struct sas_port *port; + struct virtual_phy *vphy = NULL; + + if (!hba_port) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return NULL; + } + + mpt3sas_port = kzalloc(sizeof(struct _sas_port), + GFP_KERNEL); + if (!mpt3sas_port) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return NULL; + } + + INIT_LIST_HEAD(&mpt3sas_port->port_list); + INIT_LIST_HEAD(&mpt3sas_port->phy_list); + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_sas_address(ioc, + sas_address, hba_port); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!sas_node) { + ioc_err(ioc, "%s: Could not find parent sas_address(0x%016llx)!\n", + __func__, (u64)sas_address); + goto out_fail; + } + + if ((_transport_set_identify(ioc, handle, + &mpt3sas_port->remote_identify))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + + if (mpt3sas_port->remote_identify.device_type == SAS_PHY_UNUSED) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + + mpt3sas_port->hba_port = hba_port; + _transport_sanity_check(ioc, sas_node, + mpt3sas_port->remote_identify.sas_address, hba_port); + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address != + mpt3sas_port->remote_identify.sas_address) + continue; + if (sas_node->phy[i].port != hba_port) + continue; + list_add_tail(&sas_node->phy[i].port_siblings, + &mpt3sas_port->phy_list); + mpt3sas_port->num_phys++; + if (sas_node->handle <= ioc->sas_hba.num_phys) { + if (!sas_node->phy[i].hba_vphy) { + hba_port->phy_mask |= (1 << i); + continue; + } + + vphy = mpt3sas_get_vphy_by_phy(ioc, hba_port, i); + if (!vphy) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + } + } + + if (!mpt3sas_port->num_phys) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + + if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { + sas_device = mpt3sas_get_sdev_by_addr(ioc, + mpt3sas_port->remote_identify.sas_address, + mpt3sas_port->hba_port); + if (!sas_device) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + sas_device->pend_sas_rphy_add = 1; + } + + if (!sas_node->parent_dev) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + port = sas_port_alloc_num(sas_node->parent_dev); + if (!port || (sas_port_add(port))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + + list_for_each_entry(mpt3sas_phy, &mpt3sas_port->phy_list, + port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &port->dev, + "add: handle(0x%04x), sas_addr(0x%016llx), phy(%d)\n", + handle, (unsigned long long) + mpt3sas_port->remote_identify.sas_address, + mpt3sas_phy->phy_id); + sas_port_add_phy(port, mpt3sas_phy->phy); + mpt3sas_phy->phy_belongs_to_port = 1; + mpt3sas_phy->port = hba_port; + } + + mpt3sas_port->port = port; + if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { + rphy = sas_end_device_alloc(port); + sas_device->rphy = rphy; + if (sas_node->handle <= ioc->sas_hba.num_phys) { + if (!vphy) + hba_port->sas_address = + sas_device->sas_address; + else + vphy->sas_address = + sas_device->sas_address; + } + } else { + rphy = sas_expander_alloc(port, + mpt3sas_port->remote_identify.device_type); + if (sas_node->handle <= ioc->sas_hba.num_phys) + hba_port->sas_address = + mpt3sas_port->remote_identify.sas_address; + } + + if (!rphy) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_delete_port; + } + + rphy->identify = mpt3sas_port->remote_identify; + + if ((sas_rphy_add(rphy))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + sas_rphy_free(rphy); + rphy = NULL; + goto out_delete_port; + } + + if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { + sas_device->pend_sas_rphy_add = 0; + sas_device_put(sas_device); + } + + dev_info(&rphy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n", handle, + (unsigned long long)mpt3sas_port->remote_identify.sas_address); + + mpt3sas_port->rphy = rphy; + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_add_tail(&mpt3sas_port->port_list, &sas_node->sas_port_list); + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* fill in report manufacture */ + if (mpt3sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + mpt3sas_port->remote_identify.device_type == + MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) + _transport_expander_report_manufacture(ioc, + mpt3sas_port->remote_identify.sas_address, + rphy_to_expander_device(rphy), hba_port->port_id); + return mpt3sas_port; + +out_delete_port: + sas_port_delete(port); + +out_fail: + list_for_each_entry_safe(mpt3sas_phy, next, &mpt3sas_port->phy_list, + port_siblings) + list_del(&mpt3sas_phy->port_siblings); + kfree(mpt3sas_port); + return NULL; +} + +/** + * mpt3sas_transport_port_remove - remove port from the list + * @ioc: per adapter object + * @sas_address: sas address of attached device + * @sas_address_parent: sas address of parent expander or sas host + * @port: hba port entry + * Context: This function will acquire ioc->sas_node_lock. + * + * Removing object and freeing associated memory from the + * ioc->sas_port_list. + */ +void +mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + u64 sas_address_parent, struct hba_port *port) +{ + int i; + unsigned long flags; + struct _sas_port *mpt3sas_port, *next; + struct _sas_node *sas_node; + u8 found = 0; + struct _sas_phy *mpt3sas_phy, *next_phy; + struct hba_port *hba_port_next, *hba_port = NULL; + struct virtual_phy *vphy, *vphy_next = NULL; + + if (!port) + return; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_sas_address(ioc, + sas_address_parent, port); + if (!sas_node) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return; + } + list_for_each_entry_safe(mpt3sas_port, next, &sas_node->sas_port_list, + port_list) { + if (mpt3sas_port->remote_identify.sas_address != sas_address) + continue; + if (mpt3sas_port->hba_port != port) + continue; + found = 1; + list_del(&mpt3sas_port->port_list); + goto out; + } + out: + if (!found) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return; + } + + if (sas_node->handle <= ioc->sas_hba.num_phys && + (ioc->multipath_on_hba)) { + if (port->vphys_mask) { + list_for_each_entry_safe(vphy, vphy_next, + &port->vphys_list, list) { + if (vphy->sas_address != sas_address) + continue; + ioc_info(ioc, + "remove vphy entry: %p of port:%p,from %d port's vphys list\n", + vphy, port, port->port_id); + port->vphys_mask &= ~vphy->phy_mask; + list_del(&vphy->list); + kfree(vphy); + } + } + + list_for_each_entry_safe(hba_port, hba_port_next, + &ioc->port_table_list, list) { + if (hba_port != port) + continue; + /* + * Delete hba_port object if + * - hba_port object's sas address matches with current + * removed device's sas address and no vphy's + * associated with it. + * - Current removed device is a vSES device and + * none of the other direct attached device have + * this vSES device's port number (hence hba_port + * object sas_address field will be zero). + */ + if ((hba_port->sas_address == sas_address || + !hba_port->sas_address) && !hba_port->vphys_mask) { + ioc_info(ioc, + "remove hba_port entry: %p port: %d from hba_port list\n", + hba_port, hba_port->port_id); + list_del(&hba_port->list); + kfree(hba_port); + } else if (hba_port->sas_address == sas_address && + hba_port->vphys_mask) { + /* + * Current removed device is a non vSES device + * and a vSES device has the same port number + * as of current device's port number. Hence + * only clear the sas_address filed, don't + * delete the hba_port object. + */ + ioc_info(ioc, + "clearing sas_address from hba_port entry: %p port: %d from hba_port list\n", + hba_port, hba_port->port_id); + port->sas_address = 0; + } + break; + } + } + + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address == sas_address) + memset(&sas_node->phy[i].remote_identify, 0 , + sizeof(struct sas_identify)); + } + + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + list_for_each_entry_safe(mpt3sas_phy, next_phy, + &mpt3sas_port->phy_list, port_siblings) { + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt3sas_port->port->dev, + "remove: sas_addr(0x%016llx), phy(%d)\n", + (unsigned long long) + mpt3sas_port->remote_identify.sas_address, + mpt3sas_phy->phy_id); + mpt3sas_phy->phy_belongs_to_port = 0; + if (!ioc->remove_host) + sas_port_delete_phy(mpt3sas_port->port, + mpt3sas_phy->phy); + list_del(&mpt3sas_phy->port_siblings); + } + if (!ioc->remove_host) + sas_port_delete(mpt3sas_port->port); + ioc_info(ioc, "%s: removed: sas_addr(0x%016llx)\n", + __func__, (unsigned long long)sas_address); + kfree(mpt3sas_port); +} + +/** + * mpt3sas_transport_add_host_phy - report sas_host phy to transport + * @ioc: per adapter object + * @mpt3sas_phy: mpt3sas per phy object + * @phy_pg0: sas phy page 0 + * @parent_dev: parent device class object + * + * Return: 0 for success, non-zero for failure. + */ +int +mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy + *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt3sas_phy->phy_id; + + + INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt3sas_phy->handle, + &mpt3sas_phy->identify))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + phy->identify = mpt3sas_phy->identify; + mpt3sas_phy->attached_handle = le16_to_cpu(phy_pg0.AttachedDevHandle); + if (mpt3sas_phy->attached_handle) + _transport_set_identify(ioc, mpt3sas_phy->attached_handle, + &mpt3sas_phy->remote_identify); + phy->identify.phy_identifier = mpt3sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + phy_pg0.NegotiatedLinkRate & MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + phy_pg0.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate >> 4); + phy->hostdata = mpt3sas_phy->port; + + if ((sas_phy_add(phy))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt3sas_phy->handle, (unsigned long long) + mpt3sas_phy->identify.sas_address, + mpt3sas_phy->attached_handle, + (unsigned long long) + mpt3sas_phy->remote_identify.sas_address); + mpt3sas_phy->phy = phy; + return 0; +} + + +/** + * mpt3sas_transport_add_expander_phy - report expander phy to transport + * @ioc: per adapter object + * @mpt3sas_phy: mpt3sas per phy object + * @expander_pg1: expander page 1 + * @parent_dev: parent device class object + * + * Return: 0 for success, non-zero for failure. + */ +int +mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy + *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1, + struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mpt3sas_phy->phy_id; + + INIT_LIST_HEAD(&mpt3sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + if ((_transport_set_identify(ioc, mpt3sas_phy->handle, + &mpt3sas_phy->identify))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + phy->identify = mpt3sas_phy->identify; + mpt3sas_phy->attached_handle = + le16_to_cpu(expander_pg1.AttachedDevHandle); + if (mpt3sas_phy->attached_handle) + _transport_set_identify(ioc, mpt3sas_phy->attached_handle, + &mpt3sas_phy->remote_identify); + phy->identify.phy_identifier = mpt3sas_phy->phy_id; + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + expander_pg1.NegotiatedLinkRate & + MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + phy->minimum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate & MPI2_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = _transport_convert_phy_link_rate( + expander_pg1.HwLinkRate >> 4); + phy->minimum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + expander_pg1.ProgrammedLinkRate >> 4); + phy->hostdata = mpt3sas_phy->port; + + if ((sas_phy_add(phy))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &phy->dev, + "add: handle(0x%04x), sas_addr(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + mpt3sas_phy->handle, (unsigned long long) + mpt3sas_phy->identify.sas_address, + mpt3sas_phy->attached_handle, + (unsigned long long) + mpt3sas_phy->remote_identify.sas_address); + mpt3sas_phy->phy = phy; + return 0; +} + +/** + * mpt3sas_transport_update_links - refreshing phy link changes + * @ioc: per adapter object + * @sas_address: sas address of parent expander or sas host + * @handle: attached device handle + * @phy_number: phy number + * @link_rate: new link rate + * @port: hba port entry + * + * Return nothing. + */ +void +mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address, u16 handle, u8 phy_number, u8 link_rate, + struct hba_port *port) +{ + unsigned long flags; + struct _sas_node *sas_node; + struct _sas_phy *mpt3sas_phy; + struct hba_port *hba_port = NULL; + + if (ioc->shost_recovery || ioc->pci_error_recovery) + return; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + sas_node = _transport_sas_node_find_by_sas_address(ioc, + sas_address, port); + if (!sas_node) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return; + } + + mpt3sas_phy = &sas_node->phy[phy_number]; + mpt3sas_phy->attached_handle = handle; + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) { + _transport_set_identify(ioc, handle, + &mpt3sas_phy->remote_identify); + if ((sas_node->handle <= ioc->sas_hba.num_phys) && + (ioc->multipath_on_hba)) { + list_for_each_entry(hba_port, + &ioc->port_table_list, list) { + if (hba_port->sas_address == sas_address && + hba_port == port) + hba_port->phy_mask |= + (1 << mpt3sas_phy->phy_id); + } + } + mpt3sas_transport_add_phy_to_an_existing_port(ioc, sas_node, + mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address, + port); + } else + memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct + sas_identify)); + + if (mpt3sas_phy->phy) + mpt3sas_phy->phy->negotiated_linkrate = + _transport_convert_phy_link_rate(link_rate); + + if ((ioc->logging_level & MPT_DEBUG_TRANSPORT)) + dev_printk(KERN_INFO, &mpt3sas_phy->phy->dev, + "refresh: parent sas_addr(0x%016llx),\n" + "\tlink_rate(0x%02x), phy(%d)\n" + "\tattached_handle(0x%04x), sas_addr(0x%016llx)\n", + (unsigned long long)sas_address, + link_rate, phy_number, handle, (unsigned long long) + mpt3sas_phy->remote_identify.sas_address); +} + +static inline void * +phy_to_ioc(struct sas_phy *phy) +{ + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + return shost_priv(shost); +} + +static inline void * +rphy_to_ioc(struct sas_rphy *rphy) +{ + struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); + return shost_priv(shost); +} + +/* report phy error log structure */ +struct phy_error_log_request { + u8 smp_frame_type; /* 0x40 */ + u8 function; /* 0x11 */ + u8 allocated_response_length; + u8 request_length; /* 02 */ + u8 reserved_1[5]; + u8 phy_identifier; + u8 reserved_2[2]; +}; + +/* report phy error log reply structure */ +struct phy_error_log_reply { + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x11 */ + u8 function_result; + u8 response_length; + __be16 expander_change_count; + u8 reserved_1[3]; + u8 phy_identifier; + u8 reserved_2[2]; + __be32 invalid_dword; + __be32 running_disparity_error; + __be32 loss_of_dword_sync; + __be32 phy_reset_problem; +}; + +/** + * _transport_get_expander_phy_error_log - return expander counters + * @ioc: per adapter object + * @phy: The sas phy object + * + * Return: 0 for success, non-zero for failure. + * + */ +static int +_transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc, + struct sas_phy *phy) +{ + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + struct phy_error_log_request *phy_error_log_request; + struct phy_error_log_reply *phy_error_log_reply; + int rc; + u16 smid; + void *psge; + u8 issue_reset = 0; + void *data_out = NULL; + dma_addr_t data_out_dma; + u32 sz; + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + ioc_info(ioc, "%s: host reset in progress!\n", __func__); + return -EFAULT; + } + + mutex_lock(&ioc->transport_cmds.mutex); + + if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { + ioc_err(ioc, "%s: transport_cmds in use\n", __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT3_CMD_PENDING; + + rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); + if (rc) + goto out; + + smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); + rc = -EAGAIN; + goto out; + } + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + sz = sizeof(struct phy_error_log_request) + + sizeof(struct phy_error_log_reply); + data_out = dma_alloc_coherent(&ioc->pdev->dev, sz, &data_out_dma, + GFP_KERNEL); + if (!data_out) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + rc = -ENOMEM; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + + rc = -EINVAL; + memset(data_out, 0, sz); + phy_error_log_request = data_out; + phy_error_log_request->smp_frame_type = 0x40; + phy_error_log_request->function = 0x11; + phy_error_log_request->request_length = 2; + phy_error_log_request->allocated_response_length = 0; + phy_error_log_request->phy_identifier = phy->number; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy); + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); + mpi_request->RequestDataLength = + cpu_to_le16(sizeof(struct phy_error_log_request)); + psge = &mpi_request->SGL; + + ioc->build_sg(ioc, psge, data_out_dma, + sizeof(struct phy_error_log_request), + data_out_dma + sizeof(struct phy_error_log_request), + sizeof(struct phy_error_log_reply)); + + dtransportprintk(ioc, + ioc_info(ioc, "phy_error_log - send to sas_addr(0x%016llx), phy(%d)\n", + (u64)phy->identify.sas_address, + phy->number)); + init_completion(&ioc->transport_cmds.done); + ioc->put_smid_default(ioc, smid); + wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); + + if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { + ioc_err(ioc, "%s: timeout\n", __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, ioc_info(ioc, "phy_error_log - complete\n")); + + if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, + ioc_info(ioc, "phy_error_log - reply data transfer size(%d)\n", + le16_to_cpu(mpi_reply->ResponseDataLength))); + + if (le16_to_cpu(mpi_reply->ResponseDataLength) != + sizeof(struct phy_error_log_reply)) + goto out; + + phy_error_log_reply = data_out + + sizeof(struct phy_error_log_request); + + dtransportprintk(ioc, + ioc_info(ioc, "phy_error_log - function_result(%d)\n", + phy_error_log_reply->function_result)); + + phy->invalid_dword_count = + be32_to_cpu(phy_error_log_reply->invalid_dword); + phy->running_disparity_error_count = + be32_to_cpu(phy_error_log_reply->running_disparity_error); + phy->loss_of_dword_sync_count = + be32_to_cpu(phy_error_log_reply->loss_of_dword_sync); + phy->phy_reset_problem_count = + be32_to_cpu(phy_error_log_reply->phy_reset_problem); + rc = 0; + } else + dtransportprintk(ioc, + ioc_info(ioc, "phy_error_log - no reply\n")); + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); + out: + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + if (data_out) + dma_free_coherent(&ioc->pdev->dev, sz, data_out, data_out_dma); + + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +/** + * _transport_get_linkerrors - return phy counters for both hba and expanders + * @phy: The sas phy object + * + * Return: 0 for success, non-zero for failure. + * + */ +static int +_transport_get_linkerrors(struct sas_phy *phy) +{ + struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); + unsigned long flags; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasPhyPage1_t phy_pg1; + struct hba_port *port = phy->hostdata; + int port_id = port->port_id; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + if (_transport_sas_node_find_by_sas_address(ioc, + phy->identify.sas_address, + mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return -EINVAL; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (phy->identify.sas_address != ioc->sas_hba.sas_address) + return _transport_get_expander_phy_error_log(ioc, phy); + + /* get hba phy error logs */ + if ((mpt3sas_config_get_phy_pg1(ioc, &mpi_reply, &phy_pg1, + phy->number))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + ioc_info(ioc, "phy(%d), ioc_status (0x%04x), loginfo(0x%08x)\n", + phy->number, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + phy->invalid_dword_count = le32_to_cpu(phy_pg1.InvalidDwordCount); + phy->running_disparity_error_count = + le32_to_cpu(phy_pg1.RunningDisparityErrorCount); + phy->loss_of_dword_sync_count = + le32_to_cpu(phy_pg1.LossDwordSynchCount); + phy->phy_reset_problem_count = + le32_to_cpu(phy_pg1.PhyResetProblemCount); + return 0; +} + +/** + * _transport_get_enclosure_identifier - + * @rphy: The sas phy object + * @identifier: ? + * + * Obtain the enclosure logical id for an expander. + * Return: 0 for success, non-zero for failure. + */ +static int +_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) +{ + struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_device *sas_device; + unsigned long flags; + int rc; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); + if (sas_device) { + *identifier = sas_device->enclosure_logical_id; + rc = 0; + sas_device_put(sas_device); + } else { + *identifier = 0; + rc = -ENXIO; + } + + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return rc; +} + +/** + * _transport_get_bay_identifier - + * @rphy: The sas phy object + * + * Return: the slot id for a device that resides inside an enclosure. + */ +static int +_transport_get_bay_identifier(struct sas_rphy *rphy) +{ + struct MPT3SAS_ADAPTER *ioc = rphy_to_ioc(rphy); + struct _sas_device *sas_device; + unsigned long flags; + int rc; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); + if (sas_device) { + rc = sas_device->slot; + sas_device_put(sas_device); + } else { + rc = -ENXIO; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return rc; +} + +/* phy control request structure */ +struct phy_control_request { + u8 smp_frame_type; /* 0x40 */ + u8 function; /* 0x91 */ + u8 allocated_response_length; + u8 request_length; /* 0x09 */ + u16 expander_change_count; + u8 reserved_1[3]; + u8 phy_identifier; + u8 phy_operation; + u8 reserved_2[13]; + u64 attached_device_name; + u8 programmed_min_physical_link_rate; + u8 programmed_max_physical_link_rate; + u8 reserved_3[6]; +}; + +/* phy control reply structure */ +struct phy_control_reply { + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x11 */ + u8 function_result; + u8 response_length; +}; + +#define SMP_PHY_CONTROL_LINK_RESET (0x01) +#define SMP_PHY_CONTROL_HARD_RESET (0x02) +#define SMP_PHY_CONTROL_DISABLE (0x03) + +/** + * _transport_expander_phy_control - expander phy control + * @ioc: per adapter object + * @phy: The sas phy object + * @phy_operation: ? + * + * Return: 0 for success, non-zero for failure. + * + */ +static int +_transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc, + struct sas_phy *phy, u8 phy_operation) +{ + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + struct phy_control_request *phy_control_request; + struct phy_control_reply *phy_control_reply; + int rc; + u16 smid; + void *psge; + u8 issue_reset = 0; + void *data_out = NULL; + dma_addr_t data_out_dma; + u32 sz; + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + ioc_info(ioc, "%s: host reset in progress!\n", __func__); + return -EFAULT; + } + + mutex_lock(&ioc->transport_cmds.mutex); + + if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { + ioc_err(ioc, "%s: transport_cmds in use\n", __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT3_CMD_PENDING; + + rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); + if (rc) + goto out; + + smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); + rc = -EAGAIN; + goto out; + } + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + sz = sizeof(struct phy_control_request) + + sizeof(struct phy_control_reply); + data_out = dma_alloc_coherent(&ioc->pdev->dev, sz, &data_out_dma, + GFP_KERNEL); + if (!data_out) { + pr_err("failure at %s:%d/%s()!\n", __FILE__, + __LINE__, __func__); + rc = -ENOMEM; + mpt3sas_base_free_smid(ioc, smid); + goto out; + } + + rc = -EINVAL; + memset(data_out, 0, sz); + phy_control_request = data_out; + phy_control_request->smp_frame_type = 0x40; + phy_control_request->function = 0x91; + phy_control_request->request_length = 9; + phy_control_request->allocated_response_length = 0; + phy_control_request->phy_identifier = phy->number; + phy_control_request->phy_operation = phy_operation; + phy_control_request->programmed_min_physical_link_rate = + phy->minimum_linkrate << 4; + phy_control_request->programmed_max_physical_link_rate = + phy->maximum_linkrate << 4; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy); + mpi_request->VF_ID = 0; /* TODO */ + mpi_request->VP_ID = 0; + mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); + mpi_request->RequestDataLength = + cpu_to_le16(sizeof(struct phy_error_log_request)); + psge = &mpi_request->SGL; + + ioc->build_sg(ioc, psge, data_out_dma, + sizeof(struct phy_control_request), + data_out_dma + sizeof(struct phy_control_request), + sizeof(struct phy_control_reply)); + + dtransportprintk(ioc, + ioc_info(ioc, "phy_control - send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n", + (u64)phy->identify.sas_address, + phy->number, phy_operation)); + init_completion(&ioc->transport_cmds.done); + ioc->put_smid_default(ioc, smid); + wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); + + if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { + ioc_err(ioc, "%s: timeout\n", __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) + issue_reset = 1; + goto issue_host_reset; + } + + dtransportprintk(ioc, ioc_info(ioc, "phy_control - complete\n")); + + if (ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID) { + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, + ioc_info(ioc, "phy_control - reply data transfer size(%d)\n", + le16_to_cpu(mpi_reply->ResponseDataLength))); + + if (le16_to_cpu(mpi_reply->ResponseDataLength) != + sizeof(struct phy_control_reply)) + goto out; + + phy_control_reply = data_out + + sizeof(struct phy_control_request); + + dtransportprintk(ioc, + ioc_info(ioc, "phy_control - function_result(%d)\n", + phy_control_reply->function_result)); + + rc = 0; + } else + dtransportprintk(ioc, + ioc_info(ioc, "phy_control - no reply\n")); + + issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); + out: + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + if (data_out) + dma_free_coherent(&ioc->pdev->dev, sz, data_out, + data_out_dma); + + mutex_unlock(&ioc->transport_cmds.mutex); + return rc; +} + +/** + * _transport_phy_reset - + * @phy: The sas phy object + * @hard_reset: + * + * Return: 0 for success, non-zero for failure. + */ +static int +_transport_phy_reset(struct sas_phy *phy, int hard_reset) +{ + struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); + Mpi2SasIoUnitControlReply_t mpi_reply; + Mpi2SasIoUnitControlRequest_t mpi_request; + struct hba_port *port = phy->hostdata; + int port_id = port->port_id; + unsigned long flags; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + if (_transport_sas_node_find_by_sas_address(ioc, + phy->identify.sas_address, + mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return -EINVAL; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* handle expander phys */ + if (phy->identify.sas_address != ioc->sas_hba.sas_address) + return _transport_expander_phy_control(ioc, phy, + (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET : + SMP_PHY_CONTROL_LINK_RESET); + + /* handle hba phys */ + memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; + mpi_request.Operation = hard_reset ? + MPI2_SAS_OP_PHY_HARD_RESET : MPI2_SAS_OP_PHY_LINK_RESET; + mpi_request.PhyNum = phy->number; + + if ((mpt3sas_base_sas_iounit_control(ioc, &mpi_reply, &mpi_request))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) + ioc_info(ioc, "phy(%d), ioc_status(0x%04x), loginfo(0x%08x)\n", + phy->number, le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo)); + + return 0; +} + +/** + * _transport_phy_enable - enable/disable phys + * @phy: The sas phy object + * @enable: enable phy when true + * + * Only support sas_host direct attached phys. + * Return: 0 for success, non-zero for failure. + */ +static int +_transport_phy_enable(struct sas_phy *phy, int enable) +{ + struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 sz; + int rc = 0; + unsigned long flags; + int i, discovery_active; + struct hba_port *port = phy->hostdata; + int port_id = port->port_id; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + if (_transport_sas_node_find_by_sas_address(ioc, + phy->identify.sas_address, + mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return -EINVAL; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + /* handle expander phys */ + if (phy->identify.sas_address != ioc->sas_hba.sas_address) + return _transport_expander_phy_control(ioc, phy, + (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET : + SMP_PHY_CONTROL_DISABLE); + + /* handle hba phys */ + + /* read sas_iounit page 0 */ + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENOMEM; + goto out; + } + if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -EIO; + goto out; + } + + /* unable to enable/disable phys when when discovery is active */ + for (i = 0, discovery_active = 0; i < ioc->sas_hba.num_phys ; i++) { + if (sas_iounit_pg0->PhyData[i].PortFlags & + MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS) { + ioc_err(ioc, "discovery is active on port = %d, phy = %d: unable to enable/disable phys, try again later!\n", + sas_iounit_pg0->PhyData[i].Port, i); + discovery_active = 1; + } + } + + if (discovery_active) { + rc = -EAGAIN; + goto out; + } + + /* read sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENOMEM; + goto out; + } + if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -EIO; + goto out; + } + + /* copy Port/PortFlags/PhyFlags from page 0 */ + for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + sas_iounit_pg1->PhyData[i].Port = + sas_iounit_pg0->PhyData[i].Port; + sas_iounit_pg1->PhyData[i].PortFlags = + (sas_iounit_pg0->PhyData[i].PortFlags & + MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG); + sas_iounit_pg1->PhyData[i].PhyFlags = + (sas_iounit_pg0->PhyData[i].PhyFlags & + (MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED + + MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED)); + } + + if (enable) + sas_iounit_pg1->PhyData[phy->number].PhyFlags + &= ~MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; + else + sas_iounit_pg1->PhyData[phy->number].PhyFlags + |= MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; + + mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, sz); + + /* link reset */ + if (enable) + _transport_phy_reset(phy, 0); + + out: + kfree(sas_iounit_pg1); + kfree(sas_iounit_pg0); + return rc; +} + +/** + * _transport_phy_speed - set phy min/max link rates + * @phy: The sas phy object + * @rates: rates defined in sas_phy_linkrates + * + * Only support sas_host direct attached phys. + * + * Return: 0 for success, non-zero for failure. + */ +static int +_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) +{ + struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasPhyPage0_t phy_pg0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + u16 sz; + int i; + int rc = 0; + unsigned long flags; + struct hba_port *port = phy->hostdata; + int port_id = port->port_id; + + spin_lock_irqsave(&ioc->sas_node_lock, flags); + if (_transport_sas_node_find_by_sas_address(ioc, + phy->identify.sas_address, + mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return -EINVAL; + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + + if (!rates->minimum_linkrate) + rates->minimum_linkrate = phy->minimum_linkrate; + else if (rates->minimum_linkrate < phy->minimum_linkrate_hw) + rates->minimum_linkrate = phy->minimum_linkrate_hw; + + if (!rates->maximum_linkrate) + rates->maximum_linkrate = phy->maximum_linkrate; + else if (rates->maximum_linkrate > phy->maximum_linkrate_hw) + rates->maximum_linkrate = phy->maximum_linkrate_hw; + + /* handle expander phys */ + if (phy->identify.sas_address != ioc->sas_hba.sas_address) { + phy->minimum_linkrate = rates->minimum_linkrate; + phy->maximum_linkrate = rates->maximum_linkrate; + return _transport_expander_phy_control(ioc, phy, + SMP_PHY_CONTROL_LINK_RESET); + } + + /* handle hba phys */ + + /* sas_iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * + sizeof(Mpi2SasIOUnit1PhyData_t)); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENOMEM; + goto out; + } + if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -EIO; + goto out; + } + + for (i = 0; i < ioc->sas_hba.num_phys; i++) { + if (phy->number != i) { + sas_iounit_pg1->PhyData[i].MaxMinLinkRate = + (ioc->sas_hba.phy[i].phy->minimum_linkrate + + (ioc->sas_hba.phy[i].phy->maximum_linkrate << 4)); + } else { + sas_iounit_pg1->PhyData[i].MaxMinLinkRate = + (rates->minimum_linkrate + + (rates->maximum_linkrate << 4)); + } + } + + if (mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, + sz)) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + + /* link reset */ + _transport_phy_reset(phy, 0); + + /* read phy page 0, then update the rates in the sas transport phy */ + if (!mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, + phy->number)) { + phy->minimum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = _transport_convert_phy_link_rate( + phy_pg0.ProgrammedLinkRate >> 4); + phy->negotiated_linkrate = _transport_convert_phy_link_rate( + phy_pg0.NegotiatedLinkRate & + MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL); + } + + out: + kfree(sas_iounit_pg1); + return rc; +} + +static int +_transport_map_smp_buffer(struct device *dev, struct bsg_buffer *buf, + dma_addr_t *dma_addr, size_t *dma_len, void **p) +{ + /* Check if the request is split across multiple segments */ + if (buf->sg_cnt > 1) { + *p = dma_alloc_coherent(dev, buf->payload_len, dma_addr, + GFP_KERNEL); + if (!*p) + return -ENOMEM; + *dma_len = buf->payload_len; + } else { + if (!dma_map_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL)) + return -ENOMEM; + *dma_addr = sg_dma_address(buf->sg_list); + *dma_len = sg_dma_len(buf->sg_list); + *p = NULL; + } + + return 0; +} + +static void +_transport_unmap_smp_buffer(struct device *dev, struct bsg_buffer *buf, + dma_addr_t dma_addr, void *p) +{ + if (p) + dma_free_coherent(dev, buf->payload_len, p, dma_addr); + else + dma_unmap_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL); +} + +/** + * _transport_smp_handler - transport portal for smp passthru + * @job: ? + * @shost: shost object + * @rphy: sas transport rphy object + * + * This used primarily for smp_utils. + * Example: + * smp_rep_general /sys/class/bsg/expander-5:0 + */ +static void +_transport_smp_handler(struct bsg_job *job, struct Scsi_Host *shost, + struct sas_rphy *rphy) +{ + struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + Mpi2SmpPassthroughRequest_t *mpi_request; + Mpi2SmpPassthroughReply_t *mpi_reply; + int rc; + u16 smid; + void *psge; + dma_addr_t dma_addr_in; + dma_addr_t dma_addr_out; + void *addr_in = NULL; + void *addr_out = NULL; + size_t dma_len_in; + size_t dma_len_out; + unsigned int reslen = 0; + + if (ioc->shost_recovery || ioc->pci_error_recovery) { + ioc_info(ioc, "%s: host reset in progress!\n", __func__); + rc = -EFAULT; + goto job_done; + } + + rc = mutex_lock_interruptible(&ioc->transport_cmds.mutex); + if (rc) + goto job_done; + + if (ioc->transport_cmds.status != MPT3_CMD_NOT_USED) { + ioc_err(ioc, "%s: transport_cmds in use\n", + __func__); + rc = -EAGAIN; + goto out; + } + ioc->transport_cmds.status = MPT3_CMD_PENDING; + + rc = _transport_map_smp_buffer(&ioc->pdev->dev, &job->request_payload, + &dma_addr_out, &dma_len_out, &addr_out); + if (rc) + goto out; + if (addr_out) { + sg_copy_to_buffer(job->request_payload.sg_list, + job->request_payload.sg_cnt, addr_out, + job->request_payload.payload_len); + } + + rc = _transport_map_smp_buffer(&ioc->pdev->dev, &job->reply_payload, + &dma_addr_in, &dma_len_in, &addr_in); + if (rc) + goto unmap_out; + + rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); + if (rc) + goto unmap_in; + + smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx); + if (!smid) { + ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); + rc = -EAGAIN; + goto unmap_in; + } + + rc = 0; + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->transport_cmds.smid = smid; + + memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); + mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; + mpi_request->PhysicalPort = _transport_get_port_id_by_rphy(ioc, rphy); + mpi_request->SASAddress = (rphy) ? + cpu_to_le64(rphy->identify.sas_address) : + cpu_to_le64(ioc->sas_hba.sas_address); + mpi_request->RequestDataLength = cpu_to_le16(dma_len_out - 4); + psge = &mpi_request->SGL; + + ioc->build_sg(ioc, psge, dma_addr_out, dma_len_out - 4, dma_addr_in, + dma_len_in - 4); + + dtransportprintk(ioc, + ioc_info(ioc, "%s: sending smp request\n", __func__)); + + init_completion(&ioc->transport_cmds.done); + ioc->put_smid_default(ioc, smid); + wait_for_completion_timeout(&ioc->transport_cmds.done, 10*HZ); + + if (!(ioc->transport_cmds.status & MPT3_CMD_COMPLETE)) { + ioc_err(ioc, "%s: timeout\n", __func__); + _debug_dump_mf(mpi_request, + sizeof(Mpi2SmpPassthroughRequest_t)/4); + if (!(ioc->transport_cmds.status & MPT3_CMD_RESET)) { + mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); + rc = -ETIMEDOUT; + goto unmap_in; + } + } + + dtransportprintk(ioc, ioc_info(ioc, "%s - complete\n", __func__)); + + if (!(ioc->transport_cmds.status & MPT3_CMD_REPLY_VALID)) { + dtransportprintk(ioc, + ioc_info(ioc, "%s: no reply\n", __func__)); + rc = -ENXIO; + goto unmap_in; + } + + mpi_reply = ioc->transport_cmds.reply; + + dtransportprintk(ioc, + ioc_info(ioc, "%s: reply data transfer size(%d)\n", + __func__, + le16_to_cpu(mpi_reply->ResponseDataLength))); + + memcpy(job->reply, mpi_reply, sizeof(*mpi_reply)); + job->reply_len = sizeof(*mpi_reply); + reslen = le16_to_cpu(mpi_reply->ResponseDataLength); + + if (addr_in) { + sg_copy_to_buffer(job->reply_payload.sg_list, + job->reply_payload.sg_cnt, addr_in, + job->reply_payload.payload_len); + } + + rc = 0; + unmap_in: + _transport_unmap_smp_buffer(&ioc->pdev->dev, &job->reply_payload, + dma_addr_in, addr_in); + unmap_out: + _transport_unmap_smp_buffer(&ioc->pdev->dev, &job->request_payload, + dma_addr_out, addr_out); + out: + ioc->transport_cmds.status = MPT3_CMD_NOT_USED; + mutex_unlock(&ioc->transport_cmds.mutex); +job_done: + bsg_job_done(job, rc, reslen); +} + +struct sas_function_template mpt3sas_transport_functions = { + .get_linkerrors = _transport_get_linkerrors, + .get_enclosure_identifier = _transport_get_enclosure_identifier, + .get_bay_identifier = _transport_get_bay_identifier, + .phy_reset = _transport_phy_reset, + .phy_enable = _transport_phy_enable, + .set_phy_speed = _transport_phy_speed, + .smp_handler = _transport_smp_handler, +}; + +struct scsi_transport_template *mpt3sas_transport_template; |