diff options
Diffstat (limited to 'drivers/video/backlight/qcom-wled.c')
| -rw-r--r-- | drivers/video/backlight/qcom-wled.c | 1755 |
1 files changed, 1755 insertions, 0 deletions
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c new file mode 100644 index 000000000..527210e85 --- /dev/null +++ b/drivers/video/backlight/qcom-wled.c @@ -0,0 +1,1755 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2015, Sony Mobile Communications, AB. + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/ktime.h> +#include <linux/kernel.h> +#include <linux/backlight.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/regmap.h> + +/* From DT binding */ +#define WLED_MAX_STRINGS 4 +#define MOD_A 0 +#define MOD_B 1 + +#define WLED_DEFAULT_BRIGHTNESS 2048 +#define WLED_SOFT_START_DLY_US 10000 +#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_12B 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_15B 0x7FFF + +/* WLED3/WLED4 control registers */ +#define WLED3_CTRL_REG_FAULT_STATUS 0x08 +#define WLED3_CTRL_REG_ILIM_FAULT_BIT BIT(0) +#define WLED3_CTRL_REG_OVP_FAULT_BIT BIT(1) +#define WLED4_CTRL_REG_SC_FAULT_BIT BIT(2) +#define WLED5_CTRL_REG_OVP_PRE_ALARM_BIT BIT(4) + +#define WLED3_CTRL_REG_INT_RT_STS 0x10 +#define WLED3_CTRL_REG_OVP_FAULT_STATUS BIT(1) + +#define WLED3_CTRL_REG_MOD_EN 0x46 +#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) +#define WLED3_CTRL_REG_MOD_EN_SHIFT 7 + +#define WLED3_CTRL_REG_FEEDBACK_CONTROL 0x48 + +#define WLED3_CTRL_REG_FREQ 0x4c +#define WLED3_CTRL_REG_FREQ_MASK GENMASK(3, 0) + +#define WLED3_CTRL_REG_OVP 0x4d +#define WLED3_CTRL_REG_OVP_MASK GENMASK(1, 0) +#define WLED5_CTRL_REG_OVP_MASK GENMASK(3, 0) + +#define WLED3_CTRL_REG_ILIMIT 0x4e +#define WLED3_CTRL_REG_ILIMIT_MASK GENMASK(2, 0) + +/* WLED3/WLED4 sink registers */ +#define WLED3_SINK_REG_SYNC 0x47 +#define WLED3_SINK_REG_SYNC_CLEAR 0x00 + +#define WLED3_SINK_REG_CURR_SINK 0x4f +#define WLED3_SINK_REG_CURR_SINK_MASK GENMASK(7, 5) +#define WLED3_SINK_REG_CURR_SINK_SHFT 5 + +/* WLED3 specific per-'string' registers below */ +#define WLED3_SINK_REG_BRIGHT(n) (0x40 + n) + +#define WLED3_SINK_REG_STR_MOD_EN(n) (0x60 + (n * 0x10)) +#define WLED3_SINK_REG_STR_MOD_MASK BIT(7) + +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR(n) (0x62 + (n * 0x10)) +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(4, 0) + +#define WLED3_SINK_REG_STR_MOD_SRC(n) (0x63 + (n * 0x10)) +#define WLED3_SINK_REG_STR_MOD_SRC_MASK BIT(0) +#define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 +#define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01 + +#define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10)) +#define WLED3_SINK_REG_STR_CABC_MASK BIT(7) + +/* WLED4 specific control registers */ +#define WLED4_CTRL_REG_SHORT_PROTECT 0x5e +#define WLED4_CTRL_REG_SHORT_EN_MASK BIT(7) + +#define WLED4_CTRL_REG_SEC_ACCESS 0xd0 +#define WLED4_CTRL_REG_SEC_UNLOCK 0xa5 + +#define WLED4_CTRL_REG_TEST1 0xe2 +#define WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2 0x09 + +/* WLED4 specific sink registers */ +#define WLED4_SINK_REG_CURR_SINK 0x46 +#define WLED4_SINK_REG_CURR_SINK_MASK GENMASK(7, 4) +#define WLED4_SINK_REG_CURR_SINK_SHFT 4 + +/* WLED4 specific per-'string' registers below */ +#define WLED4_SINK_REG_STR_MOD_EN(n) (0x50 + (n * 0x10)) +#define WLED4_SINK_REG_STR_MOD_MASK BIT(7) + +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n) (0x52 + (n * 0x10)) +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(3, 0) + +#define WLED4_SINK_REG_STR_MOD_SRC(n) (0x53 + (n * 0x10)) +#define WLED4_SINK_REG_STR_MOD_SRC_MASK BIT(0) +#define WLED4_SINK_REG_STR_MOD_SRC_INT 0x00 +#define WLED4_SINK_REG_STR_MOD_SRC_EXT 0x01 + +#define WLED4_SINK_REG_STR_CABC(n) (0x56 + (n * 0x10)) +#define WLED4_SINK_REG_STR_CABC_MASK BIT(7) + +#define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10)) + +/* WLED5 specific control registers */ +#define WLED5_CTRL_REG_OVP_INT_CTL 0x5f +#define WLED5_CTRL_REG_OVP_INT_TIMER_MASK GENMASK(2, 0) + +/* WLED5 specific sink registers */ +#define WLED5_SINK_REG_MOD_A_EN 0x50 +#define WLED5_SINK_REG_MOD_B_EN 0x60 +#define WLED5_SINK_REG_MOD_EN_MASK BIT(7) + +#define WLED5_SINK_REG_MOD_A_SRC_SEL 0x51 +#define WLED5_SINK_REG_MOD_B_SRC_SEL 0x61 +#define WLED5_SINK_REG_MOD_SRC_SEL_HIGH 0 +#define WLED5_SINK_REG_MOD_SRC_SEL_EXT 0x03 +#define WLED5_SINK_REG_MOD_SRC_SEL_MASK GENMASK(1, 0) + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL 0x52 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL 0x62 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B 0 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B 1 + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB 0x53 +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_MSB 0x54 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB 0x63 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_MSB 0x64 + +#define WLED5_SINK_REG_MOD_SYNC_BIT 0x65 +#define WLED5_SINK_REG_SYNC_MOD_A_BIT BIT(0) +#define WLED5_SINK_REG_SYNC_MOD_B_BIT BIT(1) +#define WLED5_SINK_REG_SYNC_MASK GENMASK(1, 0) + +/* WLED5 specific per-'string' registers below */ +#define WLED5_SINK_REG_STR_FULL_SCALE_CURR(n) (0x72 + (n * 0x10)) + +#define WLED5_SINK_REG_STR_SRC_SEL(n) (0x73 + (n * 0x10)) +#define WLED5_SINK_REG_SRC_SEL_MOD_A 0 +#define WLED5_SINK_REG_SRC_SEL_MOD_B 1 +#define WLED5_SINK_REG_SRC_SEL_MASK GENMASK(1, 0) + +struct wled_var_cfg { + const u32 *values; + u32 (*fn)(u32); + int size; +}; + +struct wled_u32_opts { + const char *name; + u32 *val_ptr; + const struct wled_var_cfg *cfg; +}; + +struct wled_bool_opts { + const char *name; + bool *val_ptr; +}; + +struct wled_config { + u32 boost_i_limit; + u32 ovp; + u32 switch_freq; + u32 num_strings; + u32 string_i_limit; + u32 enabled_strings[WLED_MAX_STRINGS]; + u32 mod_sel; + u32 cabc_sel; + bool cs_out_en; + bool ext_gen; + bool cabc; + bool external_pfet; + bool auto_detection_enabled; +}; + +struct wled { + const char *name; + struct device *dev; + struct regmap *regmap; + struct mutex lock; /* Lock to avoid race from thread irq handler */ + ktime_t last_short_event; + ktime_t start_ovp_fault_time; + u16 ctrl_addr; + u16 sink_addr; + u16 max_string_count; + u16 auto_detection_ovp_count; + u32 brightness; + u32 max_brightness; + u32 short_count; + u32 auto_detect_count; + u32 version; + bool disabled_by_short; + bool has_short_detect; + bool cabc_disabled; + int short_irq; + int ovp_irq; + + struct wled_config cfg; + struct delayed_work ovp_work; + + /* Configures the brightness. Applicable for wled3, wled4 and wled5 */ + int (*wled_set_brightness)(struct wled *wled, u16 brightness); + + /* Configures the cabc register. Applicable for wled4 and wled5 */ + int (*wled_cabc_config)(struct wled *wled, bool enable); + + /* + * Toggles the sync bit for the brightness update to take place. + * Applicable for WLED3, WLED4 and WLED5. + */ + int (*wled_sync_toggle)(struct wled *wled); + + /* + * Time to wait before checking the OVP status after wled module enable. + * Applicable for WLED4 and WLED5. + */ + int (*wled_ovp_delay)(struct wled *wled); + + /* + * Determines if the auto string detection is required. + * Applicable for WLED4 and WLED5 + */ + bool (*wled_auto_detection_required)(struct wled *wled); +}; + +static int wled3_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, i; + __le16 v; + + v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX); + + for (i = 0; i < wled->cfg.num_strings; ++i) { + rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr + + WLED3_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]), + &v, sizeof(v)); + if (rc < 0) + return rc; + } + + return 0; +} + +static int wled4_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, i; + u16 low_limit = wled->max_brightness * 4 / 1000; + __le16 v; + + /* WLED4's lower limit of operation is 0.4% */ + if (brightness > 0 && brightness < low_limit) + brightness = low_limit; + + v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX); + + for (i = 0; i < wled->cfg.num_strings; ++i) { + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]), + &v, sizeof(v)); + if (rc < 0) + return rc; + } + + return 0; +} + +static int wled5_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, offset; + u16 low_limit = wled->max_brightness * 1 / 1000; + __le16 v; + + /* WLED5's lower limit is 0.1% */ + if (brightness < low_limit) + brightness = low_limit; + + v = cpu_to_le16(brightness & WLED5_SINK_REG_BRIGHT_MAX_15B); + + offset = (wled->cfg.mod_sel == MOD_A) ? + WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB : + WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB; + + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset, + &v, sizeof(v)); + return rc; +} + +static void wled_ovp_work(struct work_struct *work) +{ + struct wled *wled = container_of(work, + struct wled, ovp_work.work); + enable_irq(wled->ovp_irq); +} + +static int wled_module_enable(struct wled *wled, int val) +{ + int rc; + + if (wled->disabled_by_short) + return -ENXIO; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + val << WLED3_CTRL_REG_MOD_EN_SHIFT); + if (rc < 0) + return rc; + + if (wled->ovp_irq > 0) { + if (val) { + /* + * The hardware generates a storm of spurious OVP + * interrupts during soft start operations. So defer + * enabling the IRQ for 10ms to ensure that the + * soft start is complete. + */ + schedule_delayed_work(&wled->ovp_work, HZ / 100); + } else { + if (!cancel_delayed_work_sync(&wled->ovp_work)) + disable_irq(wled->ovp_irq); + } + } + + return 0; +} + +static int wled3_sync_toggle(struct wled *wled) +{ + int rc; + unsigned int mask = GENMASK(wled->max_string_count - 1, 0); + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED3_SINK_REG_SYNC, + mask, WLED3_SINK_REG_SYNC_CLEAR); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED3_SINK_REG_SYNC, + mask, mask); + + return rc; +} + +static int wled5_mod_sync_toggle(struct wled *wled) +{ + int rc; + u8 val; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, 0); + if (rc < 0) + return rc; + + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT : + WLED5_SINK_REG_SYNC_MOD_B_BIT; + return regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, val); +} + +static int wled_ovp_fault_status(struct wled *wled, bool *fault_set) +{ + int rc; + u32 int_rt_sts, fault_sts; + + *fault_set = false; + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, + &int_rt_sts); + if (rc < 0) { + dev_err(wled->dev, "Failed to read INT_RT_STS rc=%d\n", rc); + return rc; + } + + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS, + &fault_sts); + if (rc < 0) { + dev_err(wled->dev, "Failed to read FAULT_STATUS rc=%d\n", rc); + return rc; + } + + if (int_rt_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS) + *fault_set = true; + + if (wled->version == 4 && (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT)) + *fault_set = true; + + if (wled->version == 5 && (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT | + WLED5_CTRL_REG_OVP_PRE_ALARM_BIT))) + *fault_set = true; + + if (*fault_set) + dev_dbg(wled->dev, "WLED OVP fault detected, int_rt_sts=0x%x fault_sts=0x%x\n", + int_rt_sts, fault_sts); + + return rc; +} + +static int wled4_ovp_delay(struct wled *wled) +{ + return WLED_SOFT_START_DLY_US; +} + +static int wled5_ovp_delay(struct wled *wled) +{ + int rc, delay_us; + u32 val; + u8 ovp_timer_ms[8] = {1, 2, 4, 8, 12, 16, 20, 24}; + + /* For WLED5, get the delay based on OVP timer */ + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED5_CTRL_REG_OVP_INT_CTL, &val); + if (rc < 0) + delay_us = + ovp_timer_ms[val & WLED5_CTRL_REG_OVP_INT_TIMER_MASK] * 1000; + else + delay_us = 2 * WLED_SOFT_START_DLY_US; + + dev_dbg(wled->dev, "delay_time_us: %d\n", delay_us); + + return delay_us; +} + +static int wled_update_status(struct backlight_device *bl) +{ + struct wled *wled = bl_get_data(bl); + u16 brightness = backlight_get_brightness(bl); + int rc = 0; + + mutex_lock(&wled->lock); + if (brightness) { + rc = wled->wled_set_brightness(wled, brightness); + if (rc < 0) { + dev_err(wled->dev, "wled failed to set brightness rc:%d\n", + rc); + goto unlock_mutex; + } + + if (wled->version < 5) { + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "wled sync failed rc:%d\n", rc); + goto unlock_mutex; + } + } else { + /* + * For WLED5 toggling the MOD_SYNC_BIT updates the + * brightness + */ + rc = wled5_mod_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "wled mod sync failed rc:%d\n", + rc); + goto unlock_mutex; + } + } + } + + if (!!brightness != !!wled->brightness) { + rc = wled_module_enable(wled, !!brightness); + if (rc < 0) { + dev_err(wled->dev, "wled enable failed rc:%d\n", rc); + goto unlock_mutex; + } + } + + wled->brightness = brightness; + +unlock_mutex: + mutex_unlock(&wled->lock); + + return rc; +} + +static int wled4_cabc_config(struct wled *wled, bool enable) +{ + int i, j, rc; + u8 val; + + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + + val = enable ? WLED4_SINK_REG_STR_CABC_MASK : 0; + rc = regmap_update_bits(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_CABC(j), + WLED4_SINK_REG_STR_CABC_MASK, val); + if (rc < 0) + return rc; + } + + return 0; +} + +static int wled5_cabc_config(struct wled *wled, bool enable) +{ + int rc, offset; + u8 reg; + + if (wled->cabc_disabled) + return 0; + + reg = enable ? wled->cfg.cabc_sel : 0; + offset = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_A_SRC_SEL : + WLED5_SINK_REG_MOD_B_SRC_SEL; + + rc = regmap_update_bits(wled->regmap, wled->sink_addr + offset, + WLED5_SINK_REG_MOD_SRC_SEL_MASK, reg); + if (rc < 0) { + pr_err("Error in configuring CABC rc=%d\n", rc); + return rc; + } + + if (!wled->cfg.cabc_sel) + wled->cabc_disabled = true; + + return 0; +} + +#define WLED_SHORT_DLY_MS 20 +#define WLED_SHORT_CNT_MAX 5 +#define WLED_SHORT_RESET_CNT_DLY_US USEC_PER_SEC + +static irqreturn_t wled_short_irq_handler(int irq, void *_wled) +{ + struct wled *wled = _wled; + int rc; + s64 elapsed_time; + + wled->short_count++; + mutex_lock(&wled->lock); + rc = wled_module_enable(wled, false); + if (rc < 0) { + dev_err(wled->dev, "wled disable failed rc:%d\n", rc); + goto unlock_mutex; + } + + elapsed_time = ktime_us_delta(ktime_get(), + wled->last_short_event); + if (elapsed_time > WLED_SHORT_RESET_CNT_DLY_US) + wled->short_count = 1; + + if (wled->short_count > WLED_SHORT_CNT_MAX) { + dev_err(wled->dev, "Short triggered %d times, disabling WLED forever!\n", + wled->short_count); + wled->disabled_by_short = true; + goto unlock_mutex; + } + + wled->last_short_event = ktime_get(); + + msleep(WLED_SHORT_DLY_MS); + rc = wled_module_enable(wled, true); + if (rc < 0) + dev_err(wled->dev, "wled enable failed rc:%d\n", rc); + +unlock_mutex: + mutex_unlock(&wled->lock); + + return IRQ_HANDLED; +} + +#define AUTO_DETECT_BRIGHTNESS 200 + +static void wled_auto_string_detection(struct wled *wled) +{ + int rc = 0, i, j, delay_time_us; + u32 sink_config = 0; + u8 sink_test = 0, sink_valid = 0, val; + bool fault_set; + + /* Read configured sink configuration */ + rc = regmap_read(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, &sink_config); + if (rc < 0) { + dev_err(wled->dev, "Failed to read SINK configuration rc=%d\n", + rc); + goto failed_detect; + } + + /* Disable the module before starting detection */ + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to disable WLED module rc=%d\n", rc); + goto failed_detect; + } + + /* Set low brightness across all sinks */ + rc = wled4_set_brightness(wled, AUTO_DETECT_BRIGHTNESS); + if (rc < 0) { + dev_err(wled->dev, "Failed to set brightness for auto detection rc=%d\n", + rc); + goto failed_detect; + } + + if (wled->cfg.cabc) { + rc = wled->wled_cabc_config(wled, false); + if (rc < 0) + goto failed_detect; + } + + /* Disable all sinks */ + rc = regmap_write(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to disable all sinks rc=%d\n", rc); + goto failed_detect; + } + + /* Iterate through the strings one by one */ + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + j)); + + /* Enable feedback control */ + rc = regmap_write(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_FEEDBACK_CONTROL, j + 1); + if (rc < 0) { + dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n", + j + 1, rc); + goto failed_detect; + } + + /* Enable the sink */ + rc = regmap_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, sink_test); + if (rc < 0) { + dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n", + j + 1, rc); + goto failed_detect; + } + + /* Enable the module */ + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + WLED3_CTRL_REG_MOD_EN_MASK); + if (rc < 0) { + dev_err(wled->dev, "Failed to enable WLED module rc=%d\n", + rc); + goto failed_detect; + } + + delay_time_us = wled->wled_ovp_delay(wled); + usleep_range(delay_time_us, delay_time_us + 1000); + + rc = wled_ovp_fault_status(wled, &fault_set); + if (rc < 0) { + dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n", + rc); + goto failed_detect; + } + + if (fault_set) + dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n", + j + 1); + else + sink_valid |= sink_test; + + /* Disable the module */ + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to disable WLED module rc=%d\n", + rc); + goto failed_detect; + } + } + + if (!sink_valid) { + dev_err(wled->dev, "No valid WLED sinks found\n"); + wled->disabled_by_short = true; + goto failed_detect; + } + + if (sink_valid != sink_config) { + dev_warn(wled->dev, "%x is not a valid sink configuration - using %x instead\n", + sink_config, sink_valid); + sink_config = sink_valid; + } + + /* Write the new sink configuration */ + rc = regmap_write(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + sink_config); + if (rc < 0) { + dev_err(wled->dev, "Failed to reconfigure the default sink rc=%d\n", + rc); + goto failed_detect; + } + + /* Enable valid sinks */ + if (wled->version == 4) { + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + if (sink_config & + BIT(WLED4_SINK_REG_CURR_SINK_SHFT + j)) + val = WLED4_SINK_REG_STR_MOD_MASK; + else + /* Disable modulator_en for unused sink */ + val = 0; + + rc = regmap_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_MOD_EN(j), val); + if (rc < 0) { + dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n", + rc); + goto failed_detect; + } + } + } + + /* Enable CABC */ + rc = wled->wled_cabc_config(wled, true); + if (rc < 0) + goto failed_detect; + + /* Restore the feedback setting */ + rc = regmap_write(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FEEDBACK_CONTROL, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to restore feedback setting rc=%d\n", + rc); + goto failed_detect; + } + + /* Restore brightness */ + rc = wled4_set_brightness(wled, wled->brightness); + if (rc < 0) { + dev_err(wled->dev, "Failed to set brightness after auto detection rc=%d\n", + rc); + goto failed_detect; + } + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + WLED3_CTRL_REG_MOD_EN_MASK); + if (rc < 0) { + dev_err(wled->dev, "Failed to enable WLED module rc=%d\n", rc); + goto failed_detect; + } + +failed_detect: + return; +} + +#define WLED_AUTO_DETECT_OVP_COUNT 5 +#define WLED_AUTO_DETECT_CNT_DLY_US USEC_PER_SEC + +static bool wled4_auto_detection_required(struct wled *wled) +{ + s64 elapsed_time_us; + + if (!wled->cfg.auto_detection_enabled) + return false; + + /* + * Check if the OVP fault was an occasional one + * or if it's firing continuously, the latter qualifies + * for an auto-detection check. + */ + if (!wled->auto_detection_ovp_count) { + wled->start_ovp_fault_time = ktime_get(); + wled->auto_detection_ovp_count++; + } else { + elapsed_time_us = ktime_us_delta(ktime_get(), + wled->start_ovp_fault_time); + if (elapsed_time_us > WLED_AUTO_DETECT_CNT_DLY_US) + wled->auto_detection_ovp_count = 0; + else + wled->auto_detection_ovp_count++; + + if (wled->auto_detection_ovp_count >= + WLED_AUTO_DETECT_OVP_COUNT) { + wled->auto_detection_ovp_count = 0; + return true; + } + } + + return false; +} + +static bool wled5_auto_detection_required(struct wled *wled) +{ + if (!wled->cfg.auto_detection_enabled) + return false; + + /* + * Unlike WLED4, WLED5 has OVP fault density interrupt configuration + * i.e. to count the number of OVP alarms for a certain duration before + * triggering OVP fault interrupt. By default, number of OVP fault + * events counted before an interrupt is fired is 32 and the time + * interval is 12 ms. If we see one OVP fault interrupt, then that + * should qualify for a real OVP fault condition to run auto detection + * algorithm. + */ + return true; +} + +static int wled_auto_detection_at_init(struct wled *wled) +{ + int rc; + bool fault_set; + + if (!wled->cfg.auto_detection_enabled) + return 0; + + rc = wled_ovp_fault_status(wled, &fault_set); + if (rc < 0) { + dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n", + rc); + return rc; + } + + if (fault_set) { + mutex_lock(&wled->lock); + wled_auto_string_detection(wled); + mutex_unlock(&wled->lock); + } + + return rc; +} + +static irqreturn_t wled_ovp_irq_handler(int irq, void *_wled) +{ + struct wled *wled = _wled; + int rc; + u32 int_sts, fault_sts; + + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, &int_sts); + if (rc < 0) { + dev_err(wled->dev, "Error in reading WLED3_INT_RT_STS rc=%d\n", + rc); + return IRQ_HANDLED; + } + + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_FAULT_STATUS, &fault_sts); + if (rc < 0) { + dev_err(wled->dev, "Error in reading WLED_FAULT_STATUS rc=%d\n", + rc); + return IRQ_HANDLED; + } + + if (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT | + WLED3_CTRL_REG_ILIM_FAULT_BIT)) + dev_dbg(wled->dev, "WLED OVP fault detected, int_sts=%x fault_sts= %x\n", + int_sts, fault_sts); + + if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) { + if (wled->wled_auto_detection_required(wled)) { + mutex_lock(&wled->lock); + wled_auto_string_detection(wled); + mutex_unlock(&wled->lock); + } + } + + return IRQ_HANDLED; +} + +static int wled3_setup(struct wled *wled) +{ + u16 addr; + u8 sink_en = 0; + int rc, i, j; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc) + return rc; + + for (i = 0; i < wled->cfg.num_strings; ++i) { + j = wled->cfg.enabled_strings[i]; + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_EN(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_MOD_MASK, + WLED3_SINK_REG_STR_MOD_MASK); + if (rc) + return rc; + + if (wled->cfg.ext_gen) { + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_SRC(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_MOD_SRC_MASK, + WLED3_SINK_REG_STR_MOD_SRC_EXT); + if (rc) + return rc; + } + + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc) + return rc; + + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_CABC(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_CABC_MASK, + wled->cfg.cabc ? + WLED3_SINK_REG_STR_CABC_MASK : 0); + if (rc) + return rc; + + sink_en |= BIT(j + WLED3_SINK_REG_CURR_SINK_SHFT); + } + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_SINK_REG_CURR_SINK, + WLED3_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc) + return rc; + + return 0; +} + +static const struct wled_config wled3_config_defaults = { + .boost_i_limit = 3, + .string_i_limit = 20, + .ovp = 2, + .num_strings = 3, + .switch_freq = 5, + .cs_out_en = false, + .ext_gen = false, + .cabc = false, + .enabled_strings = {0, 1, 2}, +}; + +static int wled4_setup(struct wled *wled) +{ + int rc, temp, i, j; + u16 addr; + u8 sink_en = 0; + u32 sink_cfg; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc < 0) + return rc; + + if (wled->cfg.external_pfet) { + /* Unlock the secure register access */ + rc = regmap_write(wled->regmap, wled->ctrl_addr + + WLED4_CTRL_REG_SEC_ACCESS, + WLED4_CTRL_REG_SEC_UNLOCK); + if (rc < 0) + return rc; + + rc = regmap_write(wled->regmap, + wled->ctrl_addr + WLED4_CTRL_REG_TEST1, + WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2); + if (rc < 0) + return rc; + } + + rc = regmap_read(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, &sink_cfg); + if (rc < 0) + return rc; + + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; + sink_en |= 1 << temp; + } + + if (sink_cfg == sink_en) { + rc = wled_auto_detection_at_init(wled); + return rc; + } + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, 0); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) + return rc; + + /* Per sink/string configuration */ + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_MOD_EN(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_MOD_MASK, + WLED4_SINK_REG_STR_MOD_MASK); + if (rc < 0) + return rc; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc < 0) + return rc; + } + + rc = wled4_cabc_config(wled, wled->cfg.cabc); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + WLED3_CTRL_REG_MOD_EN_MASK); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc < 0) + return rc; + + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc); + return rc; + } + + rc = wled_auto_detection_at_init(wled); + + return rc; +} + +static const struct wled_config wled4_config_defaults = { + .boost_i_limit = 4, + .string_i_limit = 10, + .ovp = 1, + .num_strings = 4, + .switch_freq = 11, + .cabc = false, + .external_pfet = false, + .auto_detection_enabled = false, + .enabled_strings = {0, 1, 2, 3}, +}; + +static int wled5_setup(struct wled *wled) +{ + int rc, temp, i, j, offset; + u8 sink_en = 0; + u16 addr; + u32 val; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED5_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc < 0) + return rc; + + /* Per sink/string configuration */ + for (i = 0; i < wled->cfg.num_strings; ++i) { + j = wled->cfg.enabled_strings[i]; + addr = wled->sink_addr + + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_STR_SRC_SEL(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_SRC_SEL_MASK, + wled->cfg.mod_sel == MOD_A ? + WLED5_SINK_REG_SRC_SEL_MOD_A : + WLED5_SINK_REG_SRC_SEL_MOD_B); + + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; + sink_en |= 1 << temp; + } + + rc = wled5_cabc_config(wled, wled->cfg.cabc_sel ? true : false); + if (rc < 0) + return rc; + + /* Enable one of the modulators A or B based on mod_sel */ + addr = wled->sink_addr + WLED5_SINK_REG_MOD_A_EN; + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_MOD_B_EN; + val = (wled->cfg.mod_sel == MOD_B) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + offset = (wled->cfg.mod_sel == MOD_A) ? + WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL : + WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL; + + addr = wled->sink_addr + offset; + val = (wled->max_brightness == WLED5_SINK_REG_BRIGHT_MAX_15B) ? + WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B : + WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B; + rc = regmap_write(wled->regmap, addr, val); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc < 0) + return rc; + + /* This updates only FSC configuration in WLED5 */ + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + pr_err("Failed to toggle sync reg rc:%d\n", rc); + return rc; + } + + rc = wled_auto_detection_at_init(wled); + if (rc < 0) + return rc; + + return 0; +} + +static const struct wled_config wled5_config_defaults = { + .boost_i_limit = 5, + .string_i_limit = 10, + .ovp = 4, + .num_strings = 4, + .switch_freq = 11, + .mod_sel = 0, + .cabc_sel = 0, + .cabc = false, + .external_pfet = false, + .auto_detection_enabled = false, + .enabled_strings = {0, 1, 2, 3}, +}; + +static const u32 wled3_boost_i_limit_values[] = { + 105, 385, 525, 805, 980, 1260, 1400, 1680, +}; + +static const struct wled_var_cfg wled3_boost_i_limit_cfg = { + .values = wled3_boost_i_limit_values, + .size = ARRAY_SIZE(wled3_boost_i_limit_values), +}; + +static const u32 wled4_boost_i_limit_values[] = { + 105, 280, 450, 620, 970, 1150, 1300, 1500, +}; + +static const struct wled_var_cfg wled4_boost_i_limit_cfg = { + .values = wled4_boost_i_limit_values, + .size = ARRAY_SIZE(wled4_boost_i_limit_values), +}; + +static inline u32 wled5_boost_i_limit_values_fn(u32 idx) +{ + return 525 + (idx * 175); +} + +static const struct wled_var_cfg wled5_boost_i_limit_cfg = { + .fn = wled5_boost_i_limit_values_fn, + .size = 8, +}; + +static const u32 wled3_ovp_values[] = { + 35, 32, 29, 27, +}; + +static const struct wled_var_cfg wled3_ovp_cfg = { + .values = wled3_ovp_values, + .size = ARRAY_SIZE(wled3_ovp_values), +}; + +static const u32 wled4_ovp_values[] = { + 31100, 29600, 19600, 18100, +}; + +static const struct wled_var_cfg wled4_ovp_cfg = { + .values = wled4_ovp_values, + .size = ARRAY_SIZE(wled4_ovp_values), +}; + +static inline u32 wled5_ovp_values_fn(u32 idx) +{ + /* + * 0000 - 38.5 V + * 0001 - 37 V .. + * 1111 - 16 V + */ + return 38500 - (idx * 1500); +} + +static const struct wled_var_cfg wled5_ovp_cfg = { + .fn = wled5_ovp_values_fn, + .size = 16, +}; + +static u32 wled3_switch_freq_values_fn(u32 idx) +{ + return 19200 / (2 * (1 + idx)); +} + +static const struct wled_var_cfg wled3_switch_freq_cfg = { + .fn = wled3_switch_freq_values_fn, + .size = 16, +}; + +static const struct wled_var_cfg wled3_string_i_limit_cfg = { + .size = 26, +}; + +static const u32 wled4_string_i_limit_values[] = { + 0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000, + 22500, 25000, 27500, 30000, +}; + +static const struct wled_var_cfg wled4_string_i_limit_cfg = { + .values = wled4_string_i_limit_values, + .size = ARRAY_SIZE(wled4_string_i_limit_values), +}; + +static const struct wled_var_cfg wled5_mod_sel_cfg = { + .size = 2, +}; + +static const struct wled_var_cfg wled5_cabc_sel_cfg = { + .size = 4, +}; + +static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) +{ + if (idx >= cfg->size) + return UINT_MAX; + if (cfg->fn) + return cfg->fn(idx); + if (cfg->values) + return cfg->values[idx]; + return idx; +} + +static int wled_configure(struct wled *wled) +{ + struct wled_config *cfg = &wled->cfg; + struct device *dev = wled->dev; + const __be32 *prop_addr; + u32 size, val, c; + int rc, i, j, string_len; + + const struct wled_u32_opts *u32_opts = NULL; + const struct wled_u32_opts wled3_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled3_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled3_string_i_limit_cfg, + }, + { + .name = "qcom,ovp", + .val_ptr = &cfg->ovp, + .cfg = &wled3_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + }; + + const struct wled_u32_opts wled4_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled4_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit-microamp", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled4_string_i_limit_cfg, + }, + { + .name = "qcom,ovp-millivolt", + .val_ptr = &cfg->ovp, + .cfg = &wled4_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + }; + + const struct wled_u32_opts wled5_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled5_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit-microamp", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled4_string_i_limit_cfg, + }, + { + .name = "qcom,ovp-millivolt", + .val_ptr = &cfg->ovp, + .cfg = &wled5_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + { + .name = "qcom,modulator-sel", + .val_ptr = &cfg->mod_sel, + .cfg = &wled5_mod_sel_cfg, + }, + { + .name = "qcom,cabc-sel", + .val_ptr = &cfg->cabc_sel, + .cfg = &wled5_cabc_sel_cfg, + }, + }; + + const struct wled_bool_opts bool_opts[] = { + { "qcom,cs-out", &cfg->cs_out_en, }, + { "qcom,ext-gen", &cfg->ext_gen, }, + { "qcom,cabc", &cfg->cabc, }, + { "qcom,external-pfet", &cfg->external_pfet, }, + { "qcom,auto-string-detection", &cfg->auto_detection_enabled, }, + }; + + prop_addr = of_get_address(dev->of_node, 0, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->ctrl_addr = be32_to_cpu(*prop_addr); + + rc = of_property_read_string(dev->of_node, "label", &wled->name); + if (rc) + wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node); + + switch (wled->version) { + case 3: + u32_opts = wled3_opts; + size = ARRAY_SIZE(wled3_opts); + *cfg = wled3_config_defaults; + wled->wled_set_brightness = wled3_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; + wled->max_string_count = 3; + wled->sink_addr = wled->ctrl_addr; + break; + + case 4: + u32_opts = wled4_opts; + size = ARRAY_SIZE(wled4_opts); + *cfg = wled4_config_defaults; + wled->wled_set_brightness = wled4_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; + wled->wled_cabc_config = wled4_cabc_config; + wled->wled_ovp_delay = wled4_ovp_delay; + wled->wled_auto_detection_required = + wled4_auto_detection_required; + wled->max_string_count = 4; + + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->sink_addr = be32_to_cpu(*prop_addr); + break; + + case 5: + u32_opts = wled5_opts; + size = ARRAY_SIZE(wled5_opts); + *cfg = wled5_config_defaults; + wled->wled_set_brightness = wled5_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; + wled->wled_cabc_config = wled5_cabc_config; + wled->wled_ovp_delay = wled5_ovp_delay; + wled->wled_auto_detection_required = + wled5_auto_detection_required; + wled->max_string_count = 4; + + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->sink_addr = be32_to_cpu(*prop_addr); + break; + + default: + dev_err(wled->dev, "Invalid WLED version\n"); + return -EINVAL; + } + + for (i = 0; i < size; ++i) { + rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); + if (rc == -EINVAL) { + continue; + } else if (rc) { + dev_err(dev, "error reading '%s'\n", u32_opts[i].name); + return rc; + } + + c = UINT_MAX; + for (j = 0; c != val; j++) { + c = wled_values(u32_opts[i].cfg, j); + if (c == UINT_MAX) { + dev_err(dev, "invalid value for '%s'\n", + u32_opts[i].name); + return -EINVAL; + } + + if (c == val) + break; + } + + dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c); + *u32_opts[i].val_ptr = j; + } + + for (i = 0; i < ARRAY_SIZE(bool_opts); ++i) { + if (of_property_read_bool(dev->of_node, bool_opts[i].name)) + *bool_opts[i].val_ptr = true; + } + + string_len = of_property_count_elems_of_size(dev->of_node, + "qcom,enabled-strings", + sizeof(u32)); + if (string_len > 0) { + if (string_len > wled->max_string_count) { + dev_err(dev, "Cannot have more than %d strings\n", + wled->max_string_count); + return -EINVAL; + } + + rc = of_property_read_u32_array(dev->of_node, + "qcom,enabled-strings", + wled->cfg.enabled_strings, + string_len); + if (rc) { + dev_err(dev, "Failed to read %d elements from qcom,enabled-strings: %d\n", + string_len, rc); + return rc; + } + + for (i = 0; i < string_len; ++i) { + if (wled->cfg.enabled_strings[i] >= wled->max_string_count) { + dev_err(dev, + "qcom,enabled-strings index %d at %d is out of bounds\n", + wled->cfg.enabled_strings[i], i); + return -EINVAL; + } + } + + cfg->num_strings = string_len; + } + + rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val); + if (!rc) { + if (val < 1 || val > wled->max_string_count) { + dev_err(dev, "qcom,num-strings must be between 1 and %d\n", + wled->max_string_count); + return -EINVAL; + } + + if (string_len > 0) { + dev_warn(dev, "Only one of qcom,num-strings or qcom,enabled-strings" + " should be set\n"); + if (val > string_len) { + dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n"); + return -EINVAL; + } + } + + cfg->num_strings = val; + } + + return 0; +} + +static int wled_configure_short_irq(struct wled *wled, + struct platform_device *pdev) +{ + int rc; + + if (!wled->has_short_detect) + return 0; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED4_CTRL_REG_SHORT_PROTECT, + WLED4_CTRL_REG_SHORT_EN_MASK, + WLED4_CTRL_REG_SHORT_EN_MASK); + if (rc < 0) + return rc; + + wled->short_irq = platform_get_irq_byname(pdev, "short"); + if (wled->short_irq < 0) { + dev_dbg(&pdev->dev, "short irq is not used\n"); + return 0; + } + + rc = devm_request_threaded_irq(wled->dev, wled->short_irq, + NULL, wled_short_irq_handler, + IRQF_ONESHOT, + "wled_short_irq", wled); + if (rc < 0) + dev_err(wled->dev, "Unable to request short_irq (err:%d)\n", + rc); + + return rc; +} + +static int wled_configure_ovp_irq(struct wled *wled, + struct platform_device *pdev) +{ + int rc; + u32 val; + + wled->ovp_irq = platform_get_irq_byname(pdev, "ovp"); + if (wled->ovp_irq < 0) { + dev_dbg(&pdev->dev, "OVP IRQ not found - disabling automatic string detection\n"); + return 0; + } + + rc = devm_request_threaded_irq(wled->dev, wled->ovp_irq, NULL, + wled_ovp_irq_handler, IRQF_ONESHOT, + "wled_ovp_irq", wled); + if (rc < 0) { + dev_err(wled->dev, "Unable to request ovp_irq (err:%d)\n", + rc); + wled->ovp_irq = 0; + return 0; + } + + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, &val); + if (rc < 0) + return rc; + + /* Keep OVP irq disabled until module is enabled */ + if (!(val & WLED3_CTRL_REG_MOD_EN_MASK)) + disable_irq(wled->ovp_irq); + + return 0; +} + +static const struct backlight_ops wled_ops = { + .update_status = wled_update_status, +}; + +static int wled_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct backlight_device *bl; + struct wled *wled; + struct regmap *regmap; + u32 val; + int rc; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) { + dev_err(&pdev->dev, "Unable to get regmap\n"); + return -EINVAL; + } + + wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL); + if (!wled) + return -ENOMEM; + + wled->regmap = regmap; + wled->dev = &pdev->dev; + + wled->version = (uintptr_t)of_device_get_match_data(&pdev->dev); + if (!wled->version) { + dev_err(&pdev->dev, "Unknown device version\n"); + return -ENODEV; + } + + mutex_init(&wled->lock); + rc = wled_configure(wled); + if (rc) + return rc; + + val = WLED3_SINK_REG_BRIGHT_MAX; + of_property_read_u32(pdev->dev.of_node, "max-brightness", &val); + wled->max_brightness = val; + + switch (wled->version) { + case 3: + wled->cfg.auto_detection_enabled = false; + rc = wled3_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled3_setup failed\n"); + return rc; + } + break; + + case 4: + wled->has_short_detect = true; + rc = wled4_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled4_setup failed\n"); + return rc; + } + break; + + case 5: + wled->has_short_detect = true; + if (wled->cfg.cabc_sel) + wled->max_brightness = WLED5_SINK_REG_BRIGHT_MAX_12B; + + rc = wled5_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled5_setup failed\n"); + return rc; + } + break; + + default: + dev_err(wled->dev, "Invalid WLED version\n"); + break; + } + + INIT_DELAYED_WORK(&wled->ovp_work, wled_ovp_work); + + rc = wled_configure_short_irq(wled, pdev); + if (rc < 0) + return rc; + + rc = wled_configure_ovp_irq(wled, pdev); + if (rc < 0) + return rc; + + val = WLED_DEFAULT_BRIGHTNESS; + of_property_read_u32(pdev->dev.of_node, "default-brightness", &val); + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.brightness = val; + props.max_brightness = wled->max_brightness; + bl = devm_backlight_device_register(&pdev->dev, wled->name, + &pdev->dev, wled, + &wled_ops, &props); + return PTR_ERR_OR_ZERO(bl); +}; + +static int wled_remove(struct platform_device *pdev) +{ + struct wled *wled = platform_get_drvdata(pdev); + + mutex_destroy(&wled->lock); + cancel_delayed_work_sync(&wled->ovp_work); + disable_irq(wled->short_irq); + disable_irq(wled->ovp_irq); + + return 0; +} + +static const struct of_device_id wled_match_table[] = { + { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, + { .compatible = "qcom,pmi8994-wled", .data = (void *)4 }, + { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, + { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, + { .compatible = "qcom,pm6150l-wled", .data = (void *)5 }, + { .compatible = "qcom,pm8150l-wled", .data = (void *)5 }, + {} +}; +MODULE_DEVICE_TABLE(of, wled_match_table); + +static struct platform_driver wled_driver = { + .probe = wled_probe, + .remove = wled_remove, + .driver = { + .name = "qcom,wled", + .of_match_table = wled_match_table, + }, +}; + +module_platform_driver(wled_driver); + +MODULE_DESCRIPTION("Qualcomm WLED driver"); +MODULE_LICENSE("GPL v2"); |