1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Rockchip RK3xxx I2C controller
description:
This driver interfaces with the native I2C controller present in Rockchip
RK3xxx SoCs.
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
maintainers:
- Heiko Stuebner <heiko@sntech.de>
# Everything else is described in the common file
properties:
compatible:
oneOf:
- const: rockchip,rv1108-i2c
- const: rockchip,rk3066-i2c
- const: rockchip,rk3188-i2c
- const: rockchip,rk3228-i2c
- const: rockchip,rk3288-i2c
- const: rockchip,rk3399-i2c
- items:
- enum:
- rockchip,rk3036-i2c
- rockchip,rk3128-i2c
- rockchip,rk3368-i2c
- const: rockchip,rk3288-i2c
- items:
- enum:
- rockchip,px30-i2c
- rockchip,rk3308-i2c
- rockchip,rk3328-i2c
- rockchip,rk3568-i2c
- rockchip,rk3588-i2c
- rockchip,rv1126-i2c
- const: rockchip,rk3399-i2c
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
minItems: 1
items:
- description:
For older hardware (rk3066, rk3188, rk3228, rk3288)
there is one clock that is used both to derive the functional clock
for the device and as the bus clock.
For newer hardware (rk3399) this clock is used to derive
the functional clock
- description:
For newer hardware (rk3399) this is the bus clock
clock-names:
minItems: 1
items:
- const: i2c
- const: pclk
rockchip,grf:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Required on RK3066, RK3188 the phandle of the syscon node for
the general register file (GRF)
On those SoCs an alias with the correct I2C bus ID
(bit offset in the GRF) is also required.
clock-frequency:
default: 100000
description:
SCL frequency to use (in Hz). If omitted, 100kHz is used.
i2c-scl-rising-time-ns:
default: 1000
description:
Number of nanoseconds the SCL signal takes to rise
(t(r) in I2C specification). If not specified this is assumed to be
the maximum the specification allows(1000 ns for Standard-mode,
300 ns for Fast-mode) which might cause slightly slower communication.
i2c-scl-falling-time-ns:
default: 300
description:
Number of nanoseconds the SCL signal takes to fall
(t(f) in the I2C specification). If not specified this is assumed to
be the maximum the specification allows (300 ns) which might cause
slightly slower communication.
i2c-sda-falling-time-ns:
default: 300
description:
Number of nanoseconds the SDA signal takes to fall
(t(f) in the I2C specification). If not specified we will use the SCL
value since they are the same in nearly all cases.
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
if:
properties:
compatible:
contains:
enum:
- rockchip,rk3066-i2c
- rockchip,rk3188-i2c
then:
required:
- rockchip,grf
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/rk3188-cru-common.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c0: i2c@2002d000 {
compatible = "rockchip,rk3188-i2c";
reg = <0x2002d000 0x1000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_I2C0>;
clock-names = "i2c";
rockchip,grf = <&grf>;
i2c-scl-falling-time-ns = <100>;
i2c-scl-rising-time-ns = <800>;
#address-cells = <1>;
#size-cells = <0>;
};
|
