1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9360.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Semtech's SX9360 capacitive proximity sensor
maintainers:
- Gwendal Grignou <gwendal@chromium.org>
- Daniel Campello <campello@chromium.org>
description: |
Semtech's SX9360 proximity sensor.
properties:
compatible:
const: semtech,sx9360
reg:
maxItems: 1
interrupts:
description:
Generated by device to announce preceding read request has finished
and data is available or that a close/far proximity event has happened.
maxItems: 1
vdd-supply:
description: Main power supply
svdd-supply:
description: Host interface power supply
"#io-channel-cells":
const: 1
semtech,resolution:
$ref: /schemas/types.yaml#/definitions/uint32-array
enum: [8, 16, 32, 64, 128, 256, 512, 1024]
description:
Capacitance measurement resolution. For both phases, "reference" and
"measurement". Higher the number, higher the resolution.
default: 128
semtech,proxraw-strength:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
default: 1
description:
PROXRAW filter strength for both phases. A value of 0 represents off,
and other values represent 1-1/2^N.
semtech,avg-pos-strength:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
default: 16
description: |
Average positive filter strength. A value of 0 represents off and
UINT_MAX (4294967295) represents infinite. Other values
represent 1-1/N.
semtech,input-precharge-resistor-ohms:
default: 0
multipleOf: 2000
minimum: 0
maximum: 30000
description:
Pre-charge input resistance in Ohm.
required:
- compatible
- reg
- "#io-channel-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
proximity@28 {
compatible = "semtech,sx9360";
reg = <0x28>;
interrupt-parent = <&pio>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
vdd-supply = <&pp3300_a>;
svdd-supply = <&pp1800_prox>;
#io-channel-cells = <1>;
semtech,resolution = <256>;
semtech,proxraw-strength = <2>;
semtech,avg-pos-strength = <64>;
semtech,input-precharge-resistor-ohms = <4000>;
};
};
|
