blob: e80d5891b7eddf53e499c64446e0df41b03cfad5 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
|
Toshiba et8ek8 5MP sensor
Toshiba et8ek8 5MP sensor is an image sensor found in Nokia N900 device
More detailed documentation can be found in
Documentation/devicetree/bindings/media/video-interfaces.txt .
Mandatory properties
--------------------
- compatible: "toshiba,et8ek8"
- reg: I2C address (0x3e, or an alternative address)
- vana-supply: Analogue voltage supply (VANA), 2.8 volts
- clocks: External clock to the sensor
- clock-frequency: Frequency of the external clock to the sensor. Camera
driver will set this frequency on the external clock. The clock frequency is
a pre-determined frequency known to be suitable to the board.
- reset-gpios: XSHUTDOWN GPIO. The XSHUTDOWN signal is active low. The sensor
is in hardware standby mode when the signal is in the low state.
Optional properties
-------------------
- flash-leds: See ../video-interfaces.txt
- lens-focus: See ../video-interfaces.txt
Endpoint node mandatory properties
----------------------------------
- remote-endpoint: A phandle to the bus receiver's endpoint node.
Example
-------
&i2c3 {
clock-frequency = <400000>;
cam1: camera@3e {
compatible = "toshiba,et8ek8";
reg = <0x3e>;
vana-supply = <&vaux4>;
clocks = <&isp 0>;
clock-frequency = <9600000>;
reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
port {
csi_cam1: endpoint {
remote-endpoint = <&csi_out1>;
};
};
};
};
|
