1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx SuperSpeed DWC3 USB SoC controller
maintainers:
- Manish Narani <manish.narani@xilinx.com>
properties:
compatible:
items:
- enum:
- xlnx,zynqmp-dwc3
- xlnx,versal-dwc3
reg:
maxItems: 1
"#address-cells":
enum: [ 1, 2 ]
"#size-cells":
enum: [ 1, 2 ]
ranges: true
power-domains:
description: specifies a phandle to PM domain provider node
maxItems: 1
clocks:
description:
A list of phandle and clock-specifier pairs for the clocks
listed in clock-names.
items:
- description: Master/Core clock, has to be >= 125 MHz
for SS operation and >= 60MHz for HS operation.
- description: Clock source to core during PHY power down.
clock-names:
items:
- const: bus_clk
- const: ref_clk
resets:
description:
A list of phandles for resets listed in reset-names.
items:
- description: USB core reset
- description: USB hibernation reset
- description: USB APB reset
reset-names:
items:
- const: usb_crst
- const: usb_hibrst
- const: usb_apbrst
phys:
minItems: 1
maxItems: 2
phy-names:
minItems: 1
maxItems: 2
items:
enum:
- usb2-phy
- usb3-phy
reset-gpios:
description: GPIO used for the reset ulpi-phy
maxItems: 1
# Required child node:
patternProperties:
"^usb@[0-9a-f]+$":
$ref: snps,dwc3.yaml#
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- ranges
- power-domains
- clocks
- clock-names
- resets
- reset-names
additionalProperties: false
examples:
- |
#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
#include <dt-bindings/phy/phy.h>
axi {
#address-cells = <2>;
#size-cells = <2>;
usb@0 {
#address-cells = <0x2>;
#size-cells = <0x2>;
compatible = "xlnx,zynqmp-dwc3";
reg = <0x0 0xff9d0000 0x0 0x100>;
clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
clock-names = "bus_clk", "ref_clk";
power-domains = <&zynqmp_firmware PD_USB_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
<&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
<&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
phy-names = "usb3-phy";
ranges;
usb@fe200000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe200000 0x0 0x40000>;
interrupt-names = "host", "otg";
interrupts = <0 65 4>, <0 69 4>;
dr_mode = "host";
dma-coherent;
};
};
};
|
