1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* This contain platform specific code for APM PPC460EX based Canyonlands
* board.
*
* Copyright (c) 2010, Applied Micro Circuits Corporation
* Author: Rupjyoti Sarmah <rsarmah@apm.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/pci-bridge.h>
#include <asm/ppc4xx.h>
#include <asm/udbg.h>
#include <asm/uic.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include "44x.h"
#define BCSR_USB_EN 0x11
static const struct of_device_id ppc460ex_of_bus[] __initconst = {
{ .compatible = "ibm,plb4", },
{ .compatible = "ibm,opb", },
{ .compatible = "ibm,ebc", },
{ .compatible = "simple-bus", },
{},
};
static int __init ppc460ex_device_probe(void)
{
of_platform_bus_probe(NULL, ppc460ex_of_bus, NULL);
return 0;
}
machine_device_initcall(canyonlands, ppc460ex_device_probe);
/* Using this code only for the Canyonlands board. */
static int __init ppc460ex_probe(void)
{
if (of_machine_is_compatible("amcc,canyonlands")) {
pci_set_flags(PCI_REASSIGN_ALL_RSRC);
return 1;
}
return 0;
}
/* USB PHY fixup code on Canyonlands kit. */
static int __init ppc460ex_canyonlands_fixup(void)
{
u8 __iomem *bcsr ;
void __iomem *vaddr;
struct device_node *np;
int ret = 0;
np = of_find_compatible_node(NULL, NULL, "amcc,ppc460ex-bcsr");
if (!np) {
printk(KERN_ERR "failed did not find amcc, ppc460ex bcsr node\n");
return -ENODEV;
}
bcsr = of_iomap(np, 0);
of_node_put(np);
if (!bcsr) {
printk(KERN_CRIT "Could not remap bcsr\n");
ret = -ENODEV;
goto err_bcsr;
}
np = of_find_compatible_node(NULL, NULL, "ibm,ppc4xx-gpio");
if (!np) {
printk(KERN_ERR "failed did not find ibm,ppc4xx-gpio node\n");
return -ENODEV;
}
vaddr = of_iomap(np, 0);
of_node_put(np);
if (!vaddr) {
printk(KERN_CRIT "Could not get gpio node address\n");
ret = -ENODEV;
goto err_gpio;
}
/* Disable USB, through the BCSR7 bits */
setbits8(&bcsr[7], BCSR_USB_EN);
/* Wait for a while after reset */
msleep(100);
/* Enable USB here */
clrbits8(&bcsr[7], BCSR_USB_EN);
/*
* Configure multiplexed gpio16 and gpio19 as alternate1 output
* source after USB reset. In this configuration gpio16 will be
* USB2HStop and gpio19 will be USB2DStop. For more details refer to
* table 34-7 of PPC460EX user manual.
*/
setbits32((vaddr + GPIO0_OSRH), 0x42000000);
setbits32((vaddr + GPIO0_TSRH), 0x42000000);
err_gpio:
iounmap(vaddr);
err_bcsr:
iounmap(bcsr);
return ret;
}
machine_device_initcall(canyonlands, ppc460ex_canyonlands_fixup);
define_machine(canyonlands) {
.name = "Canyonlands",
.probe = ppc460ex_probe,
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
|
