Adding upstream version 252.22.upstream/252.22

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 198 insertions, 0 deletions

diff --git a/src/basic/linux/can/netlink.h b/src/basic/linux/can/netlink.h
new file mode 100644
index 0000000..02ec32d
--- /dev/null
+++ b/src/basic/linux/can/netlink.h
@@ -0,0 +1,185 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+/*
+ * linux/can/netlink.h
+ *
+ * Definitions for the CAN netlink interface
+ *
+ * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _UAPI_CAN_NETLINK_H
+#define _UAPI_CAN_NETLINK_H
+
+#include <linux/types.h>
+
+/*
+ * CAN bit-timing parameters
+ *
+ * For further information, please read chapter "8 BIT TIMING
+ * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
+ * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
+ */
+struct can_bittiming {
+	__u32 bitrate;		/* Bit-rate in bits/second */
+	__u32 sample_point;	/* Sample point in one-tenth of a percent */
+	__u32 tq;		/* Time quanta (TQ) in nanoseconds */
+	__u32 prop_seg;		/* Propagation segment in TQs */
+	__u32 phase_seg1;	/* Phase buffer segment 1 in TQs */
+	__u32 phase_seg2;	/* Phase buffer segment 2 in TQs */
+	__u32 sjw;		/* Synchronisation jump width in TQs */
+	__u32 brp;		/* Bit-rate prescaler */
+};
+
+/*
+ * CAN hardware-dependent bit-timing constant
+ *
+ * Used for calculating and checking bit-timing parameters
+ */
+struct can_bittiming_const {
+	char name[16];		/* Name of the CAN controller hardware */
+	__u32 tseg1_min;	/* Time segment 1 = prop_seg + phase_seg1 */
+	__u32 tseg1_max;
+	__u32 tseg2_min;	/* Time segment 2 = phase_seg2 */
+	__u32 tseg2_max;
+	__u32 sjw_max;		/* Synchronisation jump width */
+	__u32 brp_min;		/* Bit-rate prescaler */
+	__u32 brp_max;
+	__u32 brp_inc;
+};
+
+/*
+ * CAN clock parameters
+ */
+struct can_clock {
+	__u32 freq;		/* CAN system clock frequency in Hz */
+};
+
+/*
+ * CAN operational and error states
+ */
+enum can_state {
+	CAN_STATE_ERROR_ACTIVE = 0,	/* RX/TX error count < 96 */
+	CAN_STATE_ERROR_WARNING,	/* RX/TX error count < 128 */
+	CAN_STATE_ERROR_PASSIVE,	/* RX/TX error count < 256 */
+	CAN_STATE_BUS_OFF,		/* RX/TX error count >= 256 */
+	CAN_STATE_STOPPED,		/* Device is stopped */
+	CAN_STATE_SLEEPING,		/* Device is sleeping */
+	CAN_STATE_MAX
+};
+
+/*
+ * CAN bus error counters
+ */
+struct can_berr_counter {
+	__u16 txerr;
+	__u16 rxerr;
+};
+
+/*
+ * CAN controller mode
+ */
+struct can_ctrlmode {
+	__u32 mask;
+	__u32 flags;
+};
+
+#define CAN_CTRLMODE_LOOPBACK		0x01	/* Loopback mode */
+#define CAN_CTRLMODE_LISTENONLY		0x02	/* Listen-only mode */
+#define CAN_CTRLMODE_3_SAMPLES		0x04	/* Triple sampling mode */
+#define CAN_CTRLMODE_ONE_SHOT		0x08	/* One-Shot mode */
+#define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
+#define CAN_CTRLMODE_FD			0x20	/* CAN FD mode */
+#define CAN_CTRLMODE_PRESUME_ACK	0x40	/* Ignore missing CAN ACKs */
+#define CAN_CTRLMODE_FD_NON_ISO		0x80	/* CAN FD in non-ISO mode */
+#define CAN_CTRLMODE_CC_LEN8_DLC	0x100	/* Classic CAN DLC option */
+#define CAN_CTRLMODE_TDC_AUTO		0x200	/* CAN transiver automatically calculates TDCV */
+#define CAN_CTRLMODE_TDC_MANUAL		0x400	/* TDCV is manually set up by user */
+
+/*
+ * CAN device statistics
+ */
+struct can_device_stats {
+	__u32 bus_error;	/* Bus errors */
+	__u32 error_warning;	/* Changes to error warning state */
+	__u32 error_passive;	/* Changes to error passive state */
+	__u32 bus_off;		/* Changes to bus off state */
+	__u32 arbitration_lost; /* Arbitration lost errors */
+	__u32 restarts;		/* CAN controller re-starts */
+};
+
+/*
+ * CAN netlink interface
+ */
+enum {
+	IFLA_CAN_UNSPEC,
+	IFLA_CAN_BITTIMING,
+	IFLA_CAN_BITTIMING_CONST,
+	IFLA_CAN_CLOCK,
+	IFLA_CAN_STATE,
+	IFLA_CAN_CTRLMODE,
+	IFLA_CAN_RESTART_MS,
+	IFLA_CAN_RESTART,
+	IFLA_CAN_BERR_COUNTER,
+	IFLA_CAN_DATA_BITTIMING,
+	IFLA_CAN_DATA_BITTIMING_CONST,
+	IFLA_CAN_TERMINATION,
+	IFLA_CAN_TERMINATION_CONST,
+	IFLA_CAN_BITRATE_CONST,
+	IFLA_CAN_DATA_BITRATE_CONST,
+	IFLA_CAN_BITRATE_MAX,
+	IFLA_CAN_TDC,
+	IFLA_CAN_CTRLMODE_EXT,
+
+	/* add new constants above here */
+	__IFLA_CAN_MAX,
+	IFLA_CAN_MAX = __IFLA_CAN_MAX - 1
+};
+
+/*
+ * CAN FD Transmitter Delay Compensation (TDC)
+ *
+ * Please refer to struct can_tdc_const and can_tdc in
+ * include/linux/can/bittiming.h for further details.
+ */
+enum {
+	IFLA_CAN_TDC_UNSPEC,
+	IFLA_CAN_TDC_TDCV_MIN,	/* u32 */
+	IFLA_CAN_TDC_TDCV_MAX,	/* u32 */
+	IFLA_CAN_TDC_TDCO_MIN,	/* u32 */
+	IFLA_CAN_TDC_TDCO_MAX,	/* u32 */
+	IFLA_CAN_TDC_TDCF_MIN,	/* u32 */
+	IFLA_CAN_TDC_TDCF_MAX,	/* u32 */
+	IFLA_CAN_TDC_TDCV,	/* u32 */
+	IFLA_CAN_TDC_TDCO,	/* u32 */
+	IFLA_CAN_TDC_TDCF,	/* u32 */
+
+	/* add new constants above here */
+	__IFLA_CAN_TDC,
+	IFLA_CAN_TDC_MAX = __IFLA_CAN_TDC - 1
+};
+
+/*
+ * IFLA_CAN_CTRLMODE_EXT nest: controller mode extended parameters
+ */
+enum {
+	IFLA_CAN_CTRLMODE_UNSPEC,
+	IFLA_CAN_CTRLMODE_SUPPORTED,	/* u32 */
+
+	/* add new constants above here */
+	__IFLA_CAN_CTRLMODE,
+	IFLA_CAN_CTRLMODE_MAX = __IFLA_CAN_CTRLMODE - 1
+};
+
+/* u16 termination range: 1..65535 Ohms */
+#define CAN_TERMINATION_DISABLED 0
+
+#endif /* !_UAPI_CAN_NETLINK_H */
diff --git a/src/basic/linux/can/vxcan.h b/src/basic/linux/can/vxcan.h
new file mode 100644
index 0000000..4fa9d87
--- /dev/null
+++ b/src/basic/linux/can/vxcan.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+#ifndef _UAPI_CAN_VXCAN_H
+#define _UAPI_CAN_VXCAN_H
+
+enum {
+	VXCAN_INFO_UNSPEC,
+	VXCAN_INFO_PEER,
+
+	__VXCAN_INFO_MAX
+#define VXCAN_INFO_MAX	(__VXCAN_INFO_MAX - 1)
+};
+
+#endif