diff options
Diffstat (limited to 'src/basic/linux')
37 files changed, 21089 insertions, 0 deletions
diff --git a/src/basic/linux/README b/src/basic/linux/README new file mode 100644 index 0000000..790b4fe --- /dev/null +++ b/src/basic/linux/README @@ -0,0 +1,8 @@ +The files in this directory are copied from current kernel master +(b06ed1e7a2fa9b636f368a9e97c3c8877623f8b2) or WireGuard master +(8416093498ac2c754536dad4757c5d86c9ba8809), and the following +modifications are applied: +- btrfs.h: drop '__user' attributes +- if.h: drop '#include <linux/compiler.h>' and '__user' attributes +- stddef.h: drop '#include <linux/compiler_types.h>' +- guard linux/fs.h include to avoid conflict with glibc 2.36 diff --git a/src/basic/linux/batman_adv.h b/src/basic/linux/batman_adv.h new file mode 100644 index 0000000..35dc016 --- /dev/null +++ b/src/basic/linux/batman_adv.h @@ -0,0 +1,704 @@ +/* SPDX-License-Identifier: MIT */ +/* Copyright (C) B.A.T.M.A.N. contributors: + * + * Matthias Schiffer + */ + +#ifndef _UAPI_LINUX_BATMAN_ADV_H_ +#define _UAPI_LINUX_BATMAN_ADV_H_ + +#define BATADV_NL_NAME "batadv" + +#define BATADV_NL_MCAST_GROUP_CONFIG "config" +#define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter" + +/** + * enum batadv_tt_client_flags - TT client specific flags + * + * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire. + * Bits from 8 to 15 are called _local flags_ because they are used for local + * computations only. + * + * Bits from 4 to 7 - a subset of remote flags - are ensured to be in sync with + * the other nodes in the network. To achieve this goal these flags are included + * in the TT CRC computation. + */ +enum batadv_tt_client_flags { + /** + * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table + */ + BATADV_TT_CLIENT_DEL = (1 << 0), + + /** + * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and + * the new update telling its new real location has not been + * received/sent yet + */ + BATADV_TT_CLIENT_ROAM = (1 << 1), + + /** + * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi + * interface. This information is used by the "AP Isolation" feature + */ + BATADV_TT_CLIENT_WIFI = (1 << 4), + + /** + * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This + * information is used by the Extended Isolation feature + */ + BATADV_TT_CLIENT_ISOLA = (1 << 5), + + /** + * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from + * the table + */ + BATADV_TT_CLIENT_NOPURGE = (1 << 8), + + /** + * @BATADV_TT_CLIENT_NEW: this client has been added to the local table + * but has not been announced yet + */ + BATADV_TT_CLIENT_NEW = (1 << 9), + + /** + * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it + * is kept in the table for one more originator interval for consistency + * purposes + */ + BATADV_TT_CLIENT_PENDING = (1 << 10), + + /** + * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be + * part of the network but no node has already announced it + */ + BATADV_TT_CLIENT_TEMP = (1 << 11), +}; + +/** + * enum batadv_mcast_flags_priv - Private, own multicast flags + * + * These are internal, multicast related flags. Currently they describe certain + * multicast related attributes of the segment this originator bridges into the + * mesh. + * + * Those attributes are used to determine the public multicast flags this + * originator is going to announce via TT. + * + * For netlink, if BATADV_MCAST_FLAGS_BRIDGED is unset then all querier + * related flags are undefined. + */ +enum batadv_mcast_flags_priv { + /** + * @BATADV_MCAST_FLAGS_BRIDGED: There is a bridge on top of the mesh + * interface. + */ + BATADV_MCAST_FLAGS_BRIDGED = (1 << 0), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS: Whether an IGMP querier + * exists in the mesh + */ + BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS = (1 << 1), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS: Whether an MLD querier + * exists in the mesh + */ + BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS = (1 << 2), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING: If an IGMP querier + * exists, whether it is potentially shadowing multicast listeners + * (i.e. querier is behind our own bridge segment) + */ + BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING = (1 << 3), + + /** + * @BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING: If an MLD querier + * exists, whether it is potentially shadowing multicast listeners + * (i.e. querier is behind our own bridge segment) + */ + BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING = (1 << 4), +}; + +/** + * enum batadv_gw_modes - gateway mode of node + */ +enum batadv_gw_modes { + /** @BATADV_GW_MODE_OFF: gw mode disabled */ + BATADV_GW_MODE_OFF, + + /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */ + BATADV_GW_MODE_CLIENT, + + /** @BATADV_GW_MODE_SERVER: announce itself as gateway server */ + BATADV_GW_MODE_SERVER, +}; + +/** + * enum batadv_nl_attrs - batman-adv netlink attributes + */ +enum batadv_nl_attrs { + /** + * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors + */ + BATADV_ATTR_UNSPEC, + + /** + * @BATADV_ATTR_VERSION: batman-adv version string + */ + BATADV_ATTR_VERSION, + + /** + * @BATADV_ATTR_ALGO_NAME: name of routing algorithm + */ + BATADV_ATTR_ALGO_NAME, + + /** + * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface + */ + BATADV_ATTR_MESH_IFINDEX, + + /** + * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface + */ + BATADV_ATTR_MESH_IFNAME, + + /** + * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface + */ + BATADV_ATTR_MESH_ADDRESS, + + /** + * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface + */ + BATADV_ATTR_HARD_IFINDEX, + + /** + * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface + */ + BATADV_ATTR_HARD_IFNAME, + + /** + * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv + * interface + */ + BATADV_ATTR_HARD_ADDRESS, + + /** + * @BATADV_ATTR_ORIG_ADDRESS: originator mac address + */ + BATADV_ATTR_ORIG_ADDRESS, + + /** + * @BATADV_ATTR_TPMETER_RESULT: result of run (see + * batadv_tp_meter_status) + */ + BATADV_ATTR_TPMETER_RESULT, + + /** + * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took + */ + BATADV_ATTR_TPMETER_TEST_TIME, + + /** + * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run + */ + BATADV_ATTR_TPMETER_BYTES, + + /** + * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session + */ + BATADV_ATTR_TPMETER_COOKIE, + + /** + * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment + */ + BATADV_ATTR_PAD, + + /** + * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active + */ + BATADV_ATTR_ACTIVE, + + /** + * @BATADV_ATTR_TT_ADDRESS: Client MAC address + */ + BATADV_ATTR_TT_ADDRESS, + + /** + * @BATADV_ATTR_TT_TTVN: Translation table version + */ + BATADV_ATTR_TT_TTVN, + + /** + * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version + */ + BATADV_ATTR_TT_LAST_TTVN, + + /** + * @BATADV_ATTR_TT_CRC32: CRC32 over translation table + */ + BATADV_ATTR_TT_CRC32, + + /** + * @BATADV_ATTR_TT_VID: VLAN ID + */ + BATADV_ATTR_TT_VID, + + /** + * @BATADV_ATTR_TT_FLAGS: Translation table client flags + */ + BATADV_ATTR_TT_FLAGS, + + /** + * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best + */ + BATADV_ATTR_FLAG_BEST, + + /** + * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen + */ + BATADV_ATTR_LAST_SEEN_MSECS, + + /** + * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address + */ + BATADV_ATTR_NEIGH_ADDRESS, + + /** + * @BATADV_ATTR_TQ: TQ to neighbour + */ + BATADV_ATTR_TQ, + + /** + * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour + */ + BATADV_ATTR_THROUGHPUT, + + /** + * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth + */ + BATADV_ATTR_BANDWIDTH_UP, + + /** + * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth + */ + BATADV_ATTR_BANDWIDTH_DOWN, + + /** + * @BATADV_ATTR_ROUTER: Gateway router MAC address + */ + BATADV_ATTR_ROUTER, + + /** + * @BATADV_ATTR_BLA_OWN: Flag indicating own originator + */ + BATADV_ATTR_BLA_OWN, + + /** + * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address + */ + BATADV_ATTR_BLA_ADDRESS, + + /** + * @BATADV_ATTR_BLA_VID: BLA VLAN ID + */ + BATADV_ATTR_BLA_VID, + + /** + * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address + */ + BATADV_ATTR_BLA_BACKBONE, + + /** + * @BATADV_ATTR_BLA_CRC: BLA CRC + */ + BATADV_ATTR_BLA_CRC, + + /** + * @BATADV_ATTR_DAT_CACHE_IP4ADDRESS: Client IPv4 address + */ + BATADV_ATTR_DAT_CACHE_IP4ADDRESS, + + /** + * @BATADV_ATTR_DAT_CACHE_HWADDRESS: Client MAC address + */ + BATADV_ATTR_DAT_CACHE_HWADDRESS, + + /** + * @BATADV_ATTR_DAT_CACHE_VID: VLAN ID + */ + BATADV_ATTR_DAT_CACHE_VID, + + /** + * @BATADV_ATTR_MCAST_FLAGS: Per originator multicast flags + */ + BATADV_ATTR_MCAST_FLAGS, + + /** + * @BATADV_ATTR_MCAST_FLAGS_PRIV: Private, own multicast flags + */ + BATADV_ATTR_MCAST_FLAGS_PRIV, + + /** + * @BATADV_ATTR_VLANID: VLAN id on top of soft interface + */ + BATADV_ATTR_VLANID, + + /** + * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol + * messages of the mesh interface shall be aggregated or not. + */ + BATADV_ATTR_AGGREGATED_OGMS_ENABLED, + + /** + * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going + * from a wireless client to another wireless client will be silently + * dropped. + */ + BATADV_ATTR_AP_ISOLATION_ENABLED, + + /** + * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to + * classify clients as "isolated" by the Extended Isolation feature. + */ + BATADV_ATTR_ISOLATION_MARK, + + /** + * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to + * classify clients as "isolated" by the Extended Isolation feature. + */ + BATADV_ATTR_ISOLATION_MASK, + + /** + * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through + * the mesh will be sent using multiple interfaces at the same time. + */ + BATADV_ATTR_BONDING_ENABLED, + + /** + * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop + * avoidance feature is enabled. This feature detects and avoids loops + * between the mesh and devices bridged with the soft interface + */ + BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED, + + /** + * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed + * arp table feature is enabled. This feature uses a distributed hash + * table to answer ARP requests without flooding the request through + * the whole mesh. + */ + BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED, + + /** + * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going + * through the mesh will be fragmented or silently discarded if the + * packet size exceeds the outgoing interface MTU. + */ + BATADV_ATTR_FRAGMENTATION_ENABLED, + + /** + * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_DOWN, + + /** + * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which + * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set + * to 'server'. + */ + BATADV_ATTR_GW_BANDWIDTH_UP, + + /** + * @BATADV_ATTR_GW_MODE: defines the state of the gateway features. + * Possible values are specified in enum batadv_gw_modes + */ + BATADV_ATTR_GW_MODE, + + /** + * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node + * will use to choose a gateway if gw_mode was set to 'client'. + */ + BATADV_ATTR_GW_SEL_CLASS, + + /** + * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied + * to an originator message's tq-field on every hop and/or per + * hard interface + */ + BATADV_ATTR_HOP_PENALTY, + + /** + * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages + * should be send to the debug log/trace ring buffer + */ + BATADV_ATTR_LOG_LEVEL, + + /** + * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED: whether multicast + * optimizations should be replaced by simple broadcast-like flooding + * of multicast packets. If set to non-zero then all nodes in the mesh + * are going to use classic flooding for any multicast packet with no + * optimizations. + */ + BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED, + + /** + * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using + * some magic to send fewer wifi packets but still the same content) is + * enabled or not. + */ + BATADV_ATTR_NETWORK_CODING_ENABLED, + + /** + * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in + * which batman sends its protocol messages. + */ + BATADV_ATTR_ORIG_INTERVAL, + + /** + * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in + * which batman emits probing packets for neighbor sensing (ELP). + */ + BATADV_ATTR_ELP_INTERVAL, + + /** + * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be + * used by B.A.T.M.A.N. V when estimating the link throughput using + * this interface. If the value is set to 0 then batman-adv will try to + * estimate the throughput by itself. + */ + BATADV_ATTR_THROUGHPUT_OVERRIDE, + + /** + * @BATADV_ATTR_MULTICAST_FANOUT: defines the maximum number of packet + * copies that may be generated for a multicast-to-unicast conversion. + * Once this limit is exceeded distribution will fall back to broadcast. + */ + BATADV_ATTR_MULTICAST_FANOUT, + + /* add attributes above here, update the policy in netlink.c */ + + /** + * @__BATADV_ATTR_AFTER_LAST: internal use + */ + __BATADV_ATTR_AFTER_LAST, + + /** + * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available + */ + NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST, + + /** + * @BATADV_ATTR_MAX: highest attribute number currently defined + */ + BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1 +}; + +/** + * enum batadv_nl_commands - supported batman-adv netlink commands + */ +enum batadv_nl_commands { + /** + * @BATADV_CMD_UNSPEC: unspecified command to catch errors + */ + BATADV_CMD_UNSPEC, + + /** + * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh + */ + BATADV_CMD_GET_MESH, + + /** + * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH + */ + BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH, + + /** + * @BATADV_CMD_TP_METER: Start a tp meter session + */ + BATADV_CMD_TP_METER, + + /** + * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session + */ + BATADV_CMD_TP_METER_CANCEL, + + /** + * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms. + */ + BATADV_CMD_GET_ROUTING_ALGOS, + + /** + * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the + * current softif + */ + BATADV_CMD_GET_HARDIF, + + /** + * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF + */ + BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF, + + /** + * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations + */ + BATADV_CMD_GET_TRANSTABLE_LOCAL, + + /** + * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations + */ + BATADV_CMD_GET_TRANSTABLE_GLOBAL, + + /** + * @BATADV_CMD_GET_ORIGINATORS: Query list of originators + */ + BATADV_CMD_GET_ORIGINATORS, + + /** + * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours + */ + BATADV_CMD_GET_NEIGHBORS, + + /** + * @BATADV_CMD_GET_GATEWAYS: Query list of gateways + */ + BATADV_CMD_GET_GATEWAYS, + + /** + * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims + */ + BATADV_CMD_GET_BLA_CLAIM, + + /** + * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance + * backbones + */ + BATADV_CMD_GET_BLA_BACKBONE, + + /** + * @BATADV_CMD_GET_DAT_CACHE: Query list of DAT cache entries + */ + BATADV_CMD_GET_DAT_CACHE, + + /** + * @BATADV_CMD_GET_MCAST_FLAGS: Query list of multicast flags + */ + BATADV_CMD_GET_MCAST_FLAGS, + + /** + * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh + */ + BATADV_CMD_SET_MESH, + + /** + * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the + * current softif + */ + BATADV_CMD_SET_HARDIF, + + /** + * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the + * current softif + */ + BATADV_CMD_GET_VLAN, + + /** + * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the + * current softif + */ + BATADV_CMD_SET_VLAN, + + /* add new commands above here */ + + /** + * @__BATADV_CMD_AFTER_LAST: internal use + */ + __BATADV_CMD_AFTER_LAST, + + /** + * @BATADV_CMD_MAX: highest used command number + */ + BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1 +}; + +/** + * enum batadv_tp_meter_reason - reason of a tp meter test run stop + */ +enum batadv_tp_meter_reason { + /** + * @BATADV_TP_REASON_COMPLETE: sender finished tp run + */ + BATADV_TP_REASON_COMPLETE = 3, + + /** + * @BATADV_TP_REASON_CANCEL: sender was stopped during run + */ + BATADV_TP_REASON_CANCEL = 4, + + /* error status >= 128 */ + + /** + * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or + * didn't answer + */ + BATADV_TP_REASON_DST_UNREACHABLE = 128, + + /** + * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit + */ + BATADV_TP_REASON_RESEND_LIMIT = 129, + + /** + * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node + * already ongoing + */ + BATADV_TP_REASON_ALREADY_ONGOING = 130, + + /** + * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory + */ + BATADV_TP_REASON_MEMORY_ERROR = 131, + + /** + * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface + */ + BATADV_TP_REASON_CANT_SEND = 132, + + /** + * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions + */ + BATADV_TP_REASON_TOO_MANY = 133, +}; + +/** + * enum batadv_ifla_attrs - batman-adv ifla nested attributes + */ +enum batadv_ifla_attrs { + /** + * @IFLA_BATADV_UNSPEC: unspecified attribute which is not parsed by + * rtnetlink + */ + IFLA_BATADV_UNSPEC, + + /** + * @IFLA_BATADV_ALGO_NAME: routing algorithm (name) which should be + * used by the newly registered batadv net_device. + */ + IFLA_BATADV_ALGO_NAME, + + /* add attributes above here, update the policy in soft-interface.c */ + + /** + * @__IFLA_BATADV_MAX: internal use + */ + __IFLA_BATADV_MAX, +}; + +#define IFLA_BATADV_MAX (__IFLA_BATADV_MAX - 1) + +#endif /* _UAPI_LINUX_BATMAN_ADV_H_ */ diff --git a/src/basic/linux/btrfs.h b/src/basic/linux/btrfs.h new file mode 100644 index 0000000..74ed908 --- /dev/null +++ b/src/basic/linux/btrfs.h @@ -0,0 +1,1173 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2007 Oracle. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#ifndef _UAPI_LINUX_BTRFS_H +#define _UAPI_LINUX_BTRFS_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include <linux/types.h> +#include <linux/ioctl.h> +#if WANT_LINUX_FS_H +#include <linux/fs.h> +#endif + +#define BTRFS_IOCTL_MAGIC 0x94 +#define BTRFS_VOL_NAME_MAX 255 +#define BTRFS_LABEL_SIZE 256 + +/* this should be 4k */ +#define BTRFS_PATH_NAME_MAX 4087 +struct btrfs_ioctl_vol_args { + __s64 fd; + char name[BTRFS_PATH_NAME_MAX + 1]; +}; + +#define BTRFS_DEVICE_PATH_NAME_MAX 1024 +#define BTRFS_SUBVOL_NAME_MAX 4039 + +#ifndef __KERNEL__ +/* Deprecated since 5.7 */ +# define BTRFS_SUBVOL_CREATE_ASYNC (1ULL << 0) +#endif +#define BTRFS_SUBVOL_RDONLY (1ULL << 1) +#define BTRFS_SUBVOL_QGROUP_INHERIT (1ULL << 2) + +#define BTRFS_DEVICE_SPEC_BY_ID (1ULL << 3) + +#define BTRFS_SUBVOL_SPEC_BY_ID (1ULL << 4) + +#define BTRFS_VOL_ARG_V2_FLAGS_SUPPORTED \ + (BTRFS_SUBVOL_RDONLY | \ + BTRFS_SUBVOL_QGROUP_INHERIT | \ + BTRFS_DEVICE_SPEC_BY_ID | \ + BTRFS_SUBVOL_SPEC_BY_ID) + +#define BTRFS_FSID_SIZE 16 +#define BTRFS_UUID_SIZE 16 +#define BTRFS_UUID_UNPARSED_SIZE 37 + +/* + * flags definition for qgroup limits + * + * Used by: + * struct btrfs_qgroup_limit.flags + * struct btrfs_qgroup_limit_item.flags + */ +#define BTRFS_QGROUP_LIMIT_MAX_RFER (1ULL << 0) +#define BTRFS_QGROUP_LIMIT_MAX_EXCL (1ULL << 1) +#define BTRFS_QGROUP_LIMIT_RSV_RFER (1ULL << 2) +#define BTRFS_QGROUP_LIMIT_RSV_EXCL (1ULL << 3) +#define BTRFS_QGROUP_LIMIT_RFER_CMPR (1ULL << 4) +#define BTRFS_QGROUP_LIMIT_EXCL_CMPR (1ULL << 5) + +struct btrfs_qgroup_limit { + __u64 flags; + __u64 max_rfer; + __u64 max_excl; + __u64 rsv_rfer; + __u64 rsv_excl; +}; + +/* + * flags definition for qgroup inheritance + * + * Used by: + * struct btrfs_qgroup_inherit.flags + */ +#define BTRFS_QGROUP_INHERIT_SET_LIMITS (1ULL << 0) + +struct btrfs_qgroup_inherit { + __u64 flags; + __u64 num_qgroups; + __u64 num_ref_copies; + __u64 num_excl_copies; + struct btrfs_qgroup_limit lim; + __u64 qgroups[]; +}; + +struct btrfs_ioctl_qgroup_limit_args { + __u64 qgroupid; + struct btrfs_qgroup_limit lim; +}; + +/* + * Arguments for specification of subvolumes or devices, supporting by-name or + * by-id and flags + * + * The set of supported flags depends on the ioctl + * + * BTRFS_SUBVOL_RDONLY is also provided/consumed by the following ioctls: + * - BTRFS_IOC_SUBVOL_GETFLAGS + * - BTRFS_IOC_SUBVOL_SETFLAGS + */ + +/* Supported flags for BTRFS_IOC_RM_DEV_V2 */ +#define BTRFS_DEVICE_REMOVE_ARGS_MASK \ + (BTRFS_DEVICE_SPEC_BY_ID) + +/* Supported flags for BTRFS_IOC_SNAP_CREATE_V2 and BTRFS_IOC_SUBVOL_CREATE_V2 */ +#define BTRFS_SUBVOL_CREATE_ARGS_MASK \ + (BTRFS_SUBVOL_RDONLY | \ + BTRFS_SUBVOL_QGROUP_INHERIT) + +/* Supported flags for BTRFS_IOC_SNAP_DESTROY_V2 */ +#define BTRFS_SUBVOL_DELETE_ARGS_MASK \ + (BTRFS_SUBVOL_SPEC_BY_ID) + +struct btrfs_ioctl_vol_args_v2 { + __s64 fd; + __u64 transid; + __u64 flags; + union { + struct { + __u64 size; + struct btrfs_qgroup_inherit *qgroup_inherit; + }; + __u64 unused[4]; + }; + union { + char name[BTRFS_SUBVOL_NAME_MAX + 1]; + __u64 devid; + __u64 subvolid; + }; +}; + +/* + * structure to report errors and progress to userspace, either as a + * result of a finished scrub, a canceled scrub or a progress inquiry + */ +struct btrfs_scrub_progress { + __u64 data_extents_scrubbed; /* # of data extents scrubbed */ + __u64 tree_extents_scrubbed; /* # of tree extents scrubbed */ + __u64 data_bytes_scrubbed; /* # of data bytes scrubbed */ + __u64 tree_bytes_scrubbed; /* # of tree bytes scrubbed */ + __u64 read_errors; /* # of read errors encountered (EIO) */ + __u64 csum_errors; /* # of failed csum checks */ + __u64 verify_errors; /* # of occurrences, where the metadata + * of a tree block did not match the + * expected values, like generation or + * logical */ + __u64 no_csum; /* # of 4k data block for which no csum + * is present, probably the result of + * data written with nodatasum */ + __u64 csum_discards; /* # of csum for which no data was found + * in the extent tree. */ + __u64 super_errors; /* # of bad super blocks encountered */ + __u64 malloc_errors; /* # of internal kmalloc errors. These + * will likely cause an incomplete + * scrub */ + __u64 uncorrectable_errors; /* # of errors where either no intact + * copy was found or the writeback + * failed */ + __u64 corrected_errors; /* # of errors corrected */ + __u64 last_physical; /* last physical address scrubbed. In + * case a scrub was aborted, this can + * be used to restart the scrub */ + __u64 unverified_errors; /* # of occurrences where a read for a + * full (64k) bio failed, but the re- + * check succeeded for each 4k piece. + * Intermittent error. */ +}; + +#define BTRFS_SCRUB_READONLY 1 +struct btrfs_ioctl_scrub_args { + __u64 devid; /* in */ + __u64 start; /* in */ + __u64 end; /* in */ + __u64 flags; /* in */ + struct btrfs_scrub_progress progress; /* out */ + /* pad to 1k */ + __u64 unused[(1024-32-sizeof(struct btrfs_scrub_progress))/8]; +}; + +#define BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_ALWAYS 0 +#define BTRFS_IOCTL_DEV_REPLACE_CONT_READING_FROM_SRCDEV_MODE_AVOID 1 +struct btrfs_ioctl_dev_replace_start_params { + __u64 srcdevid; /* in, if 0, use srcdev_name instead */ + __u64 cont_reading_from_srcdev_mode; /* in, see #define + * above */ + __u8 srcdev_name[BTRFS_DEVICE_PATH_NAME_MAX + 1]; /* in */ + __u8 tgtdev_name[BTRFS_DEVICE_PATH_NAME_MAX + 1]; /* in */ +}; + +#define BTRFS_IOCTL_DEV_REPLACE_STATE_NEVER_STARTED 0 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED 1 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_FINISHED 2 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_CANCELED 3 +#define BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED 4 +struct btrfs_ioctl_dev_replace_status_params { + __u64 replace_state; /* out, see #define above */ + __u64 progress_1000; /* out, 0 <= x <= 1000 */ + __u64 time_started; /* out, seconds since 1-Jan-1970 */ + __u64 time_stopped; /* out, seconds since 1-Jan-1970 */ + __u64 num_write_errors; /* out */ + __u64 num_uncorrectable_read_errors; /* out */ +}; + +#define BTRFS_IOCTL_DEV_REPLACE_CMD_START 0 +#define BTRFS_IOCTL_DEV_REPLACE_CMD_STATUS 1 +#define BTRFS_IOCTL_DEV_REPLACE_CMD_CANCEL 2 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_NO_ERROR 0 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_NOT_STARTED 1 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_ALREADY_STARTED 2 +#define BTRFS_IOCTL_DEV_REPLACE_RESULT_SCRUB_INPROGRESS 3 +struct btrfs_ioctl_dev_replace_args { + __u64 cmd; /* in */ + __u64 result; /* out */ + + union { + struct btrfs_ioctl_dev_replace_start_params start; + struct btrfs_ioctl_dev_replace_status_params status; + }; /* in/out */ + + __u64 spare[64]; +}; + +struct btrfs_ioctl_dev_info_args { + __u64 devid; /* in/out */ + __u8 uuid[BTRFS_UUID_SIZE]; /* in/out */ + __u64 bytes_used; /* out */ + __u64 total_bytes; /* out */ + __u64 unused[379]; /* pad to 4k */ + __u8 path[BTRFS_DEVICE_PATH_NAME_MAX]; /* out */ +}; + +/* + * Retrieve information about the filesystem + */ + +/* Request information about checksum type and size */ +#define BTRFS_FS_INFO_FLAG_CSUM_INFO (1 << 0) + +/* Request information about filesystem generation */ +#define BTRFS_FS_INFO_FLAG_GENERATION (1 << 1) +/* Request information about filesystem metadata UUID */ +#define BTRFS_FS_INFO_FLAG_METADATA_UUID (1 << 2) + +struct btrfs_ioctl_fs_info_args { + __u64 max_id; /* out */ + __u64 num_devices; /* out */ + __u8 fsid[BTRFS_FSID_SIZE]; /* out */ + __u32 nodesize; /* out */ + __u32 sectorsize; /* out */ + __u32 clone_alignment; /* out */ + /* See BTRFS_FS_INFO_FLAG_* */ + __u16 csum_type; /* out */ + __u16 csum_size; /* out */ + __u64 flags; /* in/out */ + __u64 generation; /* out */ + __u8 metadata_uuid[BTRFS_FSID_SIZE]; /* out */ + __u8 reserved[944]; /* pad to 1k */ +}; + +/* + * feature flags + * + * Used by: + * struct btrfs_ioctl_feature_flags + */ +#define BTRFS_FEATURE_COMPAT_RO_FREE_SPACE_TREE (1ULL << 0) +/* + * Older kernels (< 4.9) on big-endian systems produced broken free space tree + * bitmaps, and btrfs-progs also used to corrupt the free space tree (versions + * < 4.7.3). If this bit is clear, then the free space tree cannot be trusted. + * btrfs-progs can also intentionally clear this bit to ask the kernel to + * rebuild the free space tree, however this might not work on older kernels + * that do not know about this bit. If not sure, clear the cache manually on + * first mount when booting older kernel versions. + */ +#define BTRFS_FEATURE_COMPAT_RO_FREE_SPACE_TREE_VALID (1ULL << 1) +#define BTRFS_FEATURE_COMPAT_RO_VERITY (1ULL << 2) + +/* + * Put all block group items into a dedicated block group tree, greatly + * reducing mount time for large filesystem due to better locality. + */ +#define BTRFS_FEATURE_COMPAT_RO_BLOCK_GROUP_TREE (1ULL << 3) + +#define BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF (1ULL << 0) +#define BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL (1ULL << 1) +#define BTRFS_FEATURE_INCOMPAT_MIXED_GROUPS (1ULL << 2) +#define BTRFS_FEATURE_INCOMPAT_COMPRESS_LZO (1ULL << 3) +#define BTRFS_FEATURE_INCOMPAT_COMPRESS_ZSTD (1ULL << 4) + +/* + * older kernels tried to do bigger metadata blocks, but the + * code was pretty buggy. Lets not let them try anymore. + */ +#define BTRFS_FEATURE_INCOMPAT_BIG_METADATA (1ULL << 5) + +#define BTRFS_FEATURE_INCOMPAT_EXTENDED_IREF (1ULL << 6) +#define BTRFS_FEATURE_INCOMPAT_RAID56 (1ULL << 7) +#define BTRFS_FEATURE_INCOMPAT_SKINNY_METADATA (1ULL << 8) +#define BTRFS_FEATURE_INCOMPAT_NO_HOLES (1ULL << 9) +#define BTRFS_FEATURE_INCOMPAT_METADATA_UUID (1ULL << 10) +#define BTRFS_FEATURE_INCOMPAT_RAID1C34 (1ULL << 11) +#define BTRFS_FEATURE_INCOMPAT_ZONED (1ULL << 12) +#define BTRFS_FEATURE_INCOMPAT_EXTENT_TREE_V2 (1ULL << 13) + +struct btrfs_ioctl_feature_flags { + __u64 compat_flags; + __u64 compat_ro_flags; + __u64 incompat_flags; +}; + +/* balance control ioctl modes */ +#define BTRFS_BALANCE_CTL_PAUSE 1 +#define BTRFS_BALANCE_CTL_CANCEL 2 + +/* + * this is packed, because it should be exactly the same as its disk + * byte order counterpart (struct btrfs_disk_balance_args) + */ +struct btrfs_balance_args { + __u64 profiles; + + /* + * usage filter + * BTRFS_BALANCE_ARGS_USAGE with a single value means '0..N' + * BTRFS_BALANCE_ARGS_USAGE_RANGE - range syntax, min..max + */ + union { + __u64 usage; + struct { + __u32 usage_min; + __u32 usage_max; + }; + }; + __u64 devid; + __u64 pstart; + __u64 pend; + __u64 vstart; + __u64 vend; + + __u64 target; + + __u64 flags; + + /* + * BTRFS_BALANCE_ARGS_LIMIT with value 'limit' + * BTRFS_BALANCE_ARGS_LIMIT_RANGE - the extend version can use minimum + * and maximum + */ + union { + __u64 limit; /* limit number of processed chunks */ + struct { + __u32 limit_min; + __u32 limit_max; + }; + }; + + /* + * Process chunks that cross stripes_min..stripes_max devices, + * BTRFS_BALANCE_ARGS_STRIPES_RANGE + */ + __u32 stripes_min; + __u32 stripes_max; + + __u64 unused[6]; +} __attribute__ ((__packed__)); + +/* report balance progress to userspace */ +struct btrfs_balance_progress { + __u64 expected; /* estimated # of chunks that will be + * relocated to fulfill the request */ + __u64 considered; /* # of chunks we have considered so far */ + __u64 completed; /* # of chunks relocated so far */ +}; + +/* + * flags definition for balance + * + * Restriper's general type filter + * + * Used by: + * btrfs_ioctl_balance_args.flags + * btrfs_balance_control.flags (internal) + */ +#define BTRFS_BALANCE_DATA (1ULL << 0) +#define BTRFS_BALANCE_SYSTEM (1ULL << 1) +#define BTRFS_BALANCE_METADATA (1ULL << 2) + +#define BTRFS_BALANCE_TYPE_MASK (BTRFS_BALANCE_DATA | \ + BTRFS_BALANCE_SYSTEM | \ + BTRFS_BALANCE_METADATA) + +#define BTRFS_BALANCE_FORCE (1ULL << 3) +#define BTRFS_BALANCE_RESUME (1ULL << 4) + +/* + * flags definitions for per-type balance args + * + * Balance filters + * + * Used by: + * struct btrfs_balance_args + */ +#define BTRFS_BALANCE_ARGS_PROFILES (1ULL << 0) +#define BTRFS_BALANCE_ARGS_USAGE (1ULL << 1) +#define BTRFS_BALANCE_ARGS_DEVID (1ULL << 2) +#define BTRFS_BALANCE_ARGS_DRANGE (1ULL << 3) +#define BTRFS_BALANCE_ARGS_VRANGE (1ULL << 4) +#define BTRFS_BALANCE_ARGS_LIMIT (1ULL << 5) +#define BTRFS_BALANCE_ARGS_LIMIT_RANGE (1ULL << 6) +#define BTRFS_BALANCE_ARGS_STRIPES_RANGE (1ULL << 7) +#define BTRFS_BALANCE_ARGS_USAGE_RANGE (1ULL << 10) + +#define BTRFS_BALANCE_ARGS_MASK \ + (BTRFS_BALANCE_ARGS_PROFILES | \ + BTRFS_BALANCE_ARGS_USAGE | \ + BTRFS_BALANCE_ARGS_DEVID | \ + BTRFS_BALANCE_ARGS_DRANGE | \ + BTRFS_BALANCE_ARGS_VRANGE | \ + BTRFS_BALANCE_ARGS_LIMIT | \ + BTRFS_BALANCE_ARGS_LIMIT_RANGE | \ + BTRFS_BALANCE_ARGS_STRIPES_RANGE | \ + BTRFS_BALANCE_ARGS_USAGE_RANGE) + +/* + * Profile changing flags. When SOFT is set we won't relocate chunk if + * it already has the target profile (even though it may be + * half-filled). + */ +#define BTRFS_BALANCE_ARGS_CONVERT (1ULL << 8) +#define BTRFS_BALANCE_ARGS_SOFT (1ULL << 9) + + +/* + * flags definition for balance state + * + * Used by: + * struct btrfs_ioctl_balance_args.state + */ +#define BTRFS_BALANCE_STATE_RUNNING (1ULL << 0) +#define BTRFS_BALANCE_STATE_PAUSE_REQ (1ULL << 1) +#define BTRFS_BALANCE_STATE_CANCEL_REQ (1ULL << 2) + +struct btrfs_ioctl_balance_args { + __u64 flags; /* in/out */ + __u64 state; /* out */ + + struct btrfs_balance_args data; /* in/out */ + struct btrfs_balance_args meta; /* in/out */ + struct btrfs_balance_args sys; /* in/out */ + + struct btrfs_balance_progress stat; /* out */ + + __u64 unused[72]; /* pad to 1k */ +}; + +#define BTRFS_INO_LOOKUP_PATH_MAX 4080 +struct btrfs_ioctl_ino_lookup_args { + __u64 treeid; + __u64 objectid; + char name[BTRFS_INO_LOOKUP_PATH_MAX]; +}; + +#define BTRFS_INO_LOOKUP_USER_PATH_MAX (4080 - BTRFS_VOL_NAME_MAX - 1) +struct btrfs_ioctl_ino_lookup_user_args { + /* in, inode number containing the subvolume of 'subvolid' */ + __u64 dirid; + /* in */ + __u64 treeid; + /* out, name of the subvolume of 'treeid' */ + char name[BTRFS_VOL_NAME_MAX + 1]; + /* + * out, constructed path from the directory with which the ioctl is + * called to dirid + */ + char path[BTRFS_INO_LOOKUP_USER_PATH_MAX]; +}; + +/* Search criteria for the btrfs SEARCH ioctl family. */ +struct btrfs_ioctl_search_key { + /* + * The tree we're searching in. 1 is the tree of tree roots, 2 is the + * extent tree, etc... + * + * A special tree_id value of 0 will cause a search in the subvolume + * tree that the inode which is passed to the ioctl is part of. + */ + __u64 tree_id; /* in */ + + /* + * When doing a tree search, we're actually taking a slice from a + * linear search space of 136-bit keys. + * + * A full 136-bit tree key is composed as: + * (objectid << 72) + (type << 64) + offset + * + * The individual min and max values for objectid, type and offset + * define the min_key and max_key values for the search range. All + * metadata items with a key in the interval [min_key, max_key] will be + * returned. + * + * Additionally, we can filter the items returned on transaction id of + * the metadata block they're stored in by specifying a transid range. + * Be aware that this transaction id only denotes when the metadata + * page that currently contains the item got written the last time as + * result of a COW operation. The number does not have any meaning + * related to the transaction in which an individual item that is being + * returned was created or changed. + */ + __u64 min_objectid; /* in */ + __u64 max_objectid; /* in */ + __u64 min_offset; /* in */ + __u64 max_offset; /* in */ + __u64 min_transid; /* in */ + __u64 max_transid; /* in */ + __u32 min_type; /* in */ + __u32 max_type; /* in */ + + /* + * input: The maximum amount of results desired. + * output: The actual amount of items returned, restricted by any of: + * - reaching the upper bound of the search range + * - reaching the input nr_items amount of items + * - completely filling the supplied memory buffer + */ + __u32 nr_items; /* in/out */ + + /* align to 64 bits */ + __u32 unused; + + /* some extra for later */ + __u64 unused1; + __u64 unused2; + __u64 unused3; + __u64 unused4; +}; + +struct btrfs_ioctl_search_header { + __u64 transid; + __u64 objectid; + __u64 offset; + __u32 type; + __u32 len; +} __attribute__ ((__may_alias__)); + +#define BTRFS_SEARCH_ARGS_BUFSIZE (4096 - sizeof(struct btrfs_ioctl_search_key)) +/* + * the buf is an array of search headers where + * each header is followed by the actual item + * the type field is expanded to 32 bits for alignment + */ +struct btrfs_ioctl_search_args { + struct btrfs_ioctl_search_key key; + char buf[BTRFS_SEARCH_ARGS_BUFSIZE]; +}; + +/* + * Extended version of TREE_SEARCH ioctl that can return more than 4k of bytes. + * The allocated size of the buffer is set in buf_size. + */ +struct btrfs_ioctl_search_args_v2 { + struct btrfs_ioctl_search_key key; /* in/out - search parameters */ + __u64 buf_size; /* in - size of buffer + * out - on EOVERFLOW: needed size + * to store item */ + __u64 buf[]; /* out - found items */ +}; + +/* With a @src_length of zero, the range from @src_offset->EOF is cloned! */ +struct btrfs_ioctl_clone_range_args { + __s64 src_fd; + __u64 src_offset, src_length; + __u64 dest_offset; +}; + +/* + * flags definition for the defrag range ioctl + * + * Used by: + * struct btrfs_ioctl_defrag_range_args.flags + */ +#define BTRFS_DEFRAG_RANGE_COMPRESS 1 +#define BTRFS_DEFRAG_RANGE_START_IO 2 +struct btrfs_ioctl_defrag_range_args { + /* start of the defrag operation */ + __u64 start; + + /* number of bytes to defrag, use (u64)-1 to say all */ + __u64 len; + + /* + * flags for the operation, which can include turning + * on compression for this one defrag + */ + __u64 flags; + + /* + * any extent bigger than this will be considered + * already defragged. Use 0 to take the kernel default + * Use 1 to say every single extent must be rewritten + */ + __u32 extent_thresh; + + /* + * which compression method to use if turning on compression + * for this defrag operation. If unspecified, zlib will + * be used + */ + __u32 compress_type; + + /* spare for later */ + __u32 unused[4]; +}; + + +#define BTRFS_SAME_DATA_DIFFERS 1 +/* For extent-same ioctl */ +struct btrfs_ioctl_same_extent_info { + __s64 fd; /* in - destination file */ + __u64 logical_offset; /* in - start of extent in destination */ + __u64 bytes_deduped; /* out - total # of bytes we were able + * to dedupe from this file */ + /* status of this dedupe operation: + * 0 if dedup succeeds + * < 0 for error + * == BTRFS_SAME_DATA_DIFFERS if data differs + */ + __s32 status; /* out - see above description */ + __u32 reserved; +}; + +struct btrfs_ioctl_same_args { + __u64 logical_offset; /* in - start of extent in source */ + __u64 length; /* in - length of extent */ + __u16 dest_count; /* in - total elements in info array */ + __u16 reserved1; + __u32 reserved2; + struct btrfs_ioctl_same_extent_info info[]; +}; + +struct btrfs_ioctl_space_info { + __u64 flags; + __u64 total_bytes; + __u64 used_bytes; +}; + +struct btrfs_ioctl_space_args { + __u64 space_slots; + __u64 total_spaces; + struct btrfs_ioctl_space_info spaces[]; +}; + +struct btrfs_data_container { + __u32 bytes_left; /* out -- bytes not needed to deliver output */ + __u32 bytes_missing; /* out -- additional bytes needed for result */ + __u32 elem_cnt; /* out */ + __u32 elem_missed; /* out */ + __u64 val[]; /* out */ +}; + +struct btrfs_ioctl_ino_path_args { + __u64 inum; /* in */ + __u64 size; /* in */ + __u64 reserved[4]; + /* struct btrfs_data_container *fspath; out */ + __u64 fspath; /* out */ +}; + +struct btrfs_ioctl_logical_ino_args { + __u64 logical; /* in */ + __u64 size; /* in */ + __u64 reserved[3]; /* must be 0 for now */ + __u64 flags; /* in, v2 only */ + /* struct btrfs_data_container *inodes; out */ + __u64 inodes; +}; + +/* + * Return every ref to the extent, not just those containing logical block. + * Requires logical == extent bytenr. + */ +#define BTRFS_LOGICAL_INO_ARGS_IGNORE_OFFSET (1ULL << 0) + +enum btrfs_dev_stat_values { + /* disk I/O failure stats */ + BTRFS_DEV_STAT_WRITE_ERRS, /* EIO or EREMOTEIO from lower layers */ + BTRFS_DEV_STAT_READ_ERRS, /* EIO or EREMOTEIO from lower layers */ + BTRFS_DEV_STAT_FLUSH_ERRS, /* EIO or EREMOTEIO from lower layers */ + + /* stats for indirect indications for I/O failures */ + BTRFS_DEV_STAT_CORRUPTION_ERRS, /* checksum error, bytenr error or + * contents is illegal: this is an + * indication that the block was damaged + * during read or write, or written to + * wrong location or read from wrong + * location */ + BTRFS_DEV_STAT_GENERATION_ERRS, /* an indication that blocks have not + * been written */ + + BTRFS_DEV_STAT_VALUES_MAX +}; + +/* Reset statistics after reading; needs SYS_ADMIN capability */ +#define BTRFS_DEV_STATS_RESET (1ULL << 0) + +struct btrfs_ioctl_get_dev_stats { + __u64 devid; /* in */ + __u64 nr_items; /* in/out */ + __u64 flags; /* in/out */ + + /* out values: */ + __u64 values[BTRFS_DEV_STAT_VALUES_MAX]; + + /* + * This pads the struct to 1032 bytes. It was originally meant to pad to + * 1024 bytes, but when adding the flags field, the padding calculation + * was not adjusted. + */ + __u64 unused[128 - 2 - BTRFS_DEV_STAT_VALUES_MAX]; +}; + +#define BTRFS_QUOTA_CTL_ENABLE 1 +#define BTRFS_QUOTA_CTL_DISABLE 2 +#define BTRFS_QUOTA_CTL_RESCAN__NOTUSED 3 +struct btrfs_ioctl_quota_ctl_args { + __u64 cmd; + __u64 status; +}; + +struct btrfs_ioctl_quota_rescan_args { + __u64 flags; + __u64 progress; + __u64 reserved[6]; +}; + +struct btrfs_ioctl_qgroup_assign_args { + __u64 assign; + __u64 src; + __u64 dst; +}; + +struct btrfs_ioctl_qgroup_create_args { + __u64 create; + __u64 qgroupid; +}; +struct btrfs_ioctl_timespec { + __u64 sec; + __u32 nsec; +}; + +struct btrfs_ioctl_received_subvol_args { + char uuid[BTRFS_UUID_SIZE]; /* in */ + __u64 stransid; /* in */ + __u64 rtransid; /* out */ + struct btrfs_ioctl_timespec stime; /* in */ + struct btrfs_ioctl_timespec rtime; /* out */ + __u64 flags; /* in */ + __u64 reserved[16]; /* in */ +}; + +/* + * Caller doesn't want file data in the send stream, even if the + * search of clone sources doesn't find an extent. UPDATE_EXTENT + * commands will be sent instead of WRITE commands. + */ +#define BTRFS_SEND_FLAG_NO_FILE_DATA 0x1 + +/* + * Do not add the leading stream header. Used when multiple snapshots + * are sent back to back. + */ +#define BTRFS_SEND_FLAG_OMIT_STREAM_HEADER 0x2 + +/* + * Omit the command at the end of the stream that indicated the end + * of the stream. This option is used when multiple snapshots are + * sent back to back. + */ +#define BTRFS_SEND_FLAG_OMIT_END_CMD 0x4 + +/* + * Read the protocol version in the structure + */ +#define BTRFS_SEND_FLAG_VERSION 0x8 + +/* + * Send compressed data using the ENCODED_WRITE command instead of decompressing + * the data and sending it with the WRITE command. This requires protocol + * version >= 2. + */ +#define BTRFS_SEND_FLAG_COMPRESSED 0x10 + +#define BTRFS_SEND_FLAG_MASK \ + (BTRFS_SEND_FLAG_NO_FILE_DATA | \ + BTRFS_SEND_FLAG_OMIT_STREAM_HEADER | \ + BTRFS_SEND_FLAG_OMIT_END_CMD | \ + BTRFS_SEND_FLAG_VERSION | \ + BTRFS_SEND_FLAG_COMPRESSED) + +struct btrfs_ioctl_send_args { + __s64 send_fd; /* in */ + __u64 clone_sources_count; /* in */ + __u64 *clone_sources; /* in */ + __u64 parent_root; /* in */ + __u64 flags; /* in */ + __u32 version; /* in */ + __u8 reserved[28]; /* in */ +}; + +/* + * Information about a fs tree root. + * + * All items are filled by the ioctl + */ +struct btrfs_ioctl_get_subvol_info_args { + /* Id of this subvolume */ + __u64 treeid; + + /* Name of this subvolume, used to get the real name at mount point */ + char name[BTRFS_VOL_NAME_MAX + 1]; + + /* + * Id of the subvolume which contains this subvolume. + * Zero for top-level subvolume or a deleted subvolume. + */ + __u64 parent_id; + + /* + * Inode number of the directory which contains this subvolume. + * Zero for top-level subvolume or a deleted subvolume + */ + __u64 dirid; + + /* Latest transaction id of this subvolume */ + __u64 generation; + + /* Flags of this subvolume */ + __u64 flags; + + /* UUID of this subvolume */ + __u8 uuid[BTRFS_UUID_SIZE]; + + /* + * UUID of the subvolume of which this subvolume is a snapshot. + * All zero for a non-snapshot subvolume. + */ + __u8 parent_uuid[BTRFS_UUID_SIZE]; + + /* + * UUID of the subvolume from which this subvolume was received. + * All zero for non-received subvolume. + */ + __u8 received_uuid[BTRFS_UUID_SIZE]; + + /* Transaction id indicating when change/create/send/receive happened */ + __u64 ctransid; + __u64 otransid; + __u64 stransid; + __u64 rtransid; + /* Time corresponding to c/o/s/rtransid */ + struct btrfs_ioctl_timespec ctime; + struct btrfs_ioctl_timespec otime; + struct btrfs_ioctl_timespec stime; + struct btrfs_ioctl_timespec rtime; + + /* Must be zero */ + __u64 reserved[8]; +}; + +#define BTRFS_MAX_ROOTREF_BUFFER_NUM 255 +struct btrfs_ioctl_get_subvol_rootref_args { + /* in/out, minimum id of rootref's treeid to be searched */ + __u64 min_treeid; + + /* out */ + struct { + __u64 treeid; + __u64 dirid; + } rootref[BTRFS_MAX_ROOTREF_BUFFER_NUM]; + + /* out, number of found items */ + __u8 num_items; + __u8 align[7]; +}; + +/* + * Data and metadata for an encoded read or write. + * + * Encoded I/O bypasses any encoding automatically done by the filesystem (e.g., + * compression). This can be used to read the compressed contents of a file or + * write pre-compressed data directly to a file. + * + * BTRFS_IOC_ENCODED_READ and BTRFS_IOC_ENCODED_WRITE are essentially + * preadv/pwritev with additional metadata about how the data is encoded and the + * size of the unencoded data. + * + * BTRFS_IOC_ENCODED_READ fills the given iovecs with the encoded data, fills + * the metadata fields, and returns the size of the encoded data. It reads one + * extent per call. It can also read data which is not encoded. + * + * BTRFS_IOC_ENCODED_WRITE uses the metadata fields, writes the encoded data + * from the iovecs, and returns the size of the encoded data. Note that the + * encoded data is not validated when it is written; if it is not valid (e.g., + * it cannot be decompressed), then a subsequent read may return an error. + * + * Since the filesystem page cache contains decoded data, encoded I/O bypasses + * the page cache. Encoded I/O requires CAP_SYS_ADMIN. + */ +struct btrfs_ioctl_encoded_io_args { + /* Input parameters for both reads and writes. */ + + /* + * iovecs containing encoded data. + * + * For reads, if the size of the encoded data is larger than the sum of + * iov[n].iov_len for 0 <= n < iovcnt, then the ioctl fails with + * ENOBUFS. + * + * For writes, the size of the encoded data is the sum of iov[n].iov_len + * for 0 <= n < iovcnt. This must be less than 128 KiB (this limit may + * increase in the future). This must also be less than or equal to + * unencoded_len. + */ + const struct iovec *iov; + /* Number of iovecs. */ + unsigned long iovcnt; + /* + * Offset in file. + * + * For writes, must be aligned to the sector size of the filesystem. + */ + __s64 offset; + /* Currently must be zero. */ + __u64 flags; + + /* + * For reads, the following members are output parameters that will + * contain the returned metadata for the encoded data. + * For writes, the following members must be set to the metadata for the + * encoded data. + */ + + /* + * Length of the data in the file. + * + * Must be less than or equal to unencoded_len - unencoded_offset. For + * writes, must be aligned to the sector size of the filesystem unless + * the data ends at or beyond the current end of the file. + */ + __u64 len; + /* + * Length of the unencoded (i.e., decrypted and decompressed) data. + * + * For writes, must be no more than 128 KiB (this limit may increase in + * the future). If the unencoded data is actually longer than + * unencoded_len, then it is truncated; if it is shorter, then it is + * extended with zeroes. + */ + __u64 unencoded_len; + /* + * Offset from the first byte of the unencoded data to the first byte of + * logical data in the file. + * + * Must be less than unencoded_len. + */ + __u64 unencoded_offset; + /* + * BTRFS_ENCODED_IO_COMPRESSION_* type. + * + * For writes, must not be BTRFS_ENCODED_IO_COMPRESSION_NONE. + */ + __u32 compression; + /* Currently always BTRFS_ENCODED_IO_ENCRYPTION_NONE. */ + __u32 encryption; + /* + * Reserved for future expansion. + * + * For reads, always returned as zero. Users should check for non-zero + * bytes. If there are any, then the kernel has a newer version of this + * structure with additional information that the user definition is + * missing. + * + * For writes, must be zeroed. + */ + __u8 reserved[64]; +}; + +/* Data is not compressed. */ +#define BTRFS_ENCODED_IO_COMPRESSION_NONE 0 +/* Data is compressed as a single zlib stream. */ +#define BTRFS_ENCODED_IO_COMPRESSION_ZLIB 1 +/* + * Data is compressed as a single zstd frame with the windowLog compression + * parameter set to no more than 17. + */ +#define BTRFS_ENCODED_IO_COMPRESSION_ZSTD 2 +/* + * Data is compressed sector by sector (using the sector size indicated by the + * name of the constant) with LZO1X and wrapped in the format documented in + * fs/btrfs/lzo.c. For writes, the compression sector size must match the + * filesystem sector size. + */ +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_4K 3 +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_8K 4 +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_16K 5 +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_32K 6 +#define BTRFS_ENCODED_IO_COMPRESSION_LZO_64K 7 +#define BTRFS_ENCODED_IO_COMPRESSION_TYPES 8 + +/* Data is not encrypted. */ +#define BTRFS_ENCODED_IO_ENCRYPTION_NONE 0 +#define BTRFS_ENCODED_IO_ENCRYPTION_TYPES 1 + +/* Error codes as returned by the kernel */ +enum btrfs_err_code { + BTRFS_ERROR_DEV_RAID1_MIN_NOT_MET = 1, + BTRFS_ERROR_DEV_RAID10_MIN_NOT_MET, + BTRFS_ERROR_DEV_RAID5_MIN_NOT_MET, + BTRFS_ERROR_DEV_RAID6_MIN_NOT_MET, + BTRFS_ERROR_DEV_TGT_REPLACE, + BTRFS_ERROR_DEV_MISSING_NOT_FOUND, + BTRFS_ERROR_DEV_ONLY_WRITABLE, + BTRFS_ERROR_DEV_EXCL_RUN_IN_PROGRESS, + BTRFS_ERROR_DEV_RAID1C3_MIN_NOT_MET, + BTRFS_ERROR_DEV_RAID1C4_MIN_NOT_MET, +}; + +#define BTRFS_IOC_SNAP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 1, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_DEFRAG _IOW(BTRFS_IOCTL_MAGIC, 2, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_RESIZE _IOW(BTRFS_IOCTL_MAGIC, 3, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_SCAN_DEV _IOW(BTRFS_IOCTL_MAGIC, 4, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_FORGET_DEV _IOW(BTRFS_IOCTL_MAGIC, 5, \ + struct btrfs_ioctl_vol_args) +/* trans start and trans end are dangerous, and only for + * use by applications that know how to avoid the + * resulting deadlocks + */ +#define BTRFS_IOC_TRANS_START _IO(BTRFS_IOCTL_MAGIC, 6) +#define BTRFS_IOC_TRANS_END _IO(BTRFS_IOCTL_MAGIC, 7) +#define BTRFS_IOC_SYNC _IO(BTRFS_IOCTL_MAGIC, 8) + +#define BTRFS_IOC_CLONE _IOW(BTRFS_IOCTL_MAGIC, 9, int) +#define BTRFS_IOC_ADD_DEV _IOW(BTRFS_IOCTL_MAGIC, 10, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_RM_DEV _IOW(BTRFS_IOCTL_MAGIC, 11, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_BALANCE _IOW(BTRFS_IOCTL_MAGIC, 12, \ + struct btrfs_ioctl_vol_args) + +#define BTRFS_IOC_CLONE_RANGE _IOW(BTRFS_IOCTL_MAGIC, 13, \ + struct btrfs_ioctl_clone_range_args) + +#define BTRFS_IOC_SUBVOL_CREATE _IOW(BTRFS_IOCTL_MAGIC, 14, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_SNAP_DESTROY _IOW(BTRFS_IOCTL_MAGIC, 15, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_DEFRAG_RANGE _IOW(BTRFS_IOCTL_MAGIC, 16, \ + struct btrfs_ioctl_defrag_range_args) +#define BTRFS_IOC_TREE_SEARCH _IOWR(BTRFS_IOCTL_MAGIC, 17, \ + struct btrfs_ioctl_search_args) +#define BTRFS_IOC_TREE_SEARCH_V2 _IOWR(BTRFS_IOCTL_MAGIC, 17, \ + struct btrfs_ioctl_search_args_v2) +#define BTRFS_IOC_INO_LOOKUP _IOWR(BTRFS_IOCTL_MAGIC, 18, \ + struct btrfs_ioctl_ino_lookup_args) +#define BTRFS_IOC_DEFAULT_SUBVOL _IOW(BTRFS_IOCTL_MAGIC, 19, __u64) +#define BTRFS_IOC_SPACE_INFO _IOWR(BTRFS_IOCTL_MAGIC, 20, \ + struct btrfs_ioctl_space_args) +#define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64) +#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64) +#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \ + struct btrfs_ioctl_vol_args_v2) +#define BTRFS_IOC_SUBVOL_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 24, \ + struct btrfs_ioctl_vol_args_v2) +#define BTRFS_IOC_SUBVOL_GETFLAGS _IOR(BTRFS_IOCTL_MAGIC, 25, __u64) +#define BTRFS_IOC_SUBVOL_SETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 26, __u64) +#define BTRFS_IOC_SCRUB _IOWR(BTRFS_IOCTL_MAGIC, 27, \ + struct btrfs_ioctl_scrub_args) +#define BTRFS_IOC_SCRUB_CANCEL _IO(BTRFS_IOCTL_MAGIC, 28) +#define BTRFS_IOC_SCRUB_PROGRESS _IOWR(BTRFS_IOCTL_MAGIC, 29, \ + struct btrfs_ioctl_scrub_args) +#define BTRFS_IOC_DEV_INFO _IOWR(BTRFS_IOCTL_MAGIC, 30, \ + struct btrfs_ioctl_dev_info_args) +#define BTRFS_IOC_FS_INFO _IOR(BTRFS_IOCTL_MAGIC, 31, \ + struct btrfs_ioctl_fs_info_args) +#define BTRFS_IOC_BALANCE_V2 _IOWR(BTRFS_IOCTL_MAGIC, 32, \ + struct btrfs_ioctl_balance_args) +#define BTRFS_IOC_BALANCE_CTL _IOW(BTRFS_IOCTL_MAGIC, 33, int) +#define BTRFS_IOC_BALANCE_PROGRESS _IOR(BTRFS_IOCTL_MAGIC, 34, \ + struct btrfs_ioctl_balance_args) +#define BTRFS_IOC_INO_PATHS _IOWR(BTRFS_IOCTL_MAGIC, 35, \ + struct btrfs_ioctl_ino_path_args) +#define BTRFS_IOC_LOGICAL_INO _IOWR(BTRFS_IOCTL_MAGIC, 36, \ + struct btrfs_ioctl_logical_ino_args) +#define BTRFS_IOC_SET_RECEIVED_SUBVOL _IOWR(BTRFS_IOCTL_MAGIC, 37, \ + struct btrfs_ioctl_received_subvol_args) +#define BTRFS_IOC_SEND _IOW(BTRFS_IOCTL_MAGIC, 38, struct btrfs_ioctl_send_args) +#define BTRFS_IOC_DEVICES_READY _IOR(BTRFS_IOCTL_MAGIC, 39, \ + struct btrfs_ioctl_vol_args) +#define BTRFS_IOC_QUOTA_CTL _IOWR(BTRFS_IOCTL_MAGIC, 40, \ + struct btrfs_ioctl_quota_ctl_args) +#define BTRFS_IOC_QGROUP_ASSIGN _IOW(BTRFS_IOCTL_MAGIC, 41, \ + struct btrfs_ioctl_qgroup_assign_args) +#define BTRFS_IOC_QGROUP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 42, \ + struct btrfs_ioctl_qgroup_create_args) +#define BTRFS_IOC_QGROUP_LIMIT _IOR(BTRFS_IOCTL_MAGIC, 43, \ + struct btrfs_ioctl_qgroup_limit_args) +#define BTRFS_IOC_QUOTA_RESCAN _IOW(BTRFS_IOCTL_MAGIC, 44, \ + struct btrfs_ioctl_quota_rescan_args) +#define BTRFS_IOC_QUOTA_RESCAN_STATUS _IOR(BTRFS_IOCTL_MAGIC, 45, \ + struct btrfs_ioctl_quota_rescan_args) +#define BTRFS_IOC_QUOTA_RESCAN_WAIT _IO(BTRFS_IOCTL_MAGIC, 46) +#define BTRFS_IOC_GET_FSLABEL FS_IOC_GETFSLABEL +#define BTRFS_IOC_SET_FSLABEL FS_IOC_SETFSLABEL +#define BTRFS_IOC_GET_DEV_STATS _IOWR(BTRFS_IOCTL_MAGIC, 52, \ + struct btrfs_ioctl_get_dev_stats) +#define BTRFS_IOC_DEV_REPLACE _IOWR(BTRFS_IOCTL_MAGIC, 53, \ + struct btrfs_ioctl_dev_replace_args) +#define BTRFS_IOC_FILE_EXTENT_SAME _IOWR(BTRFS_IOCTL_MAGIC, 54, \ + struct btrfs_ioctl_same_args) +#define BTRFS_IOC_GET_FEATURES _IOR(BTRFS_IOCTL_MAGIC, 57, \ + struct btrfs_ioctl_feature_flags) +#define BTRFS_IOC_SET_FEATURES _IOW(BTRFS_IOCTL_MAGIC, 57, \ + struct btrfs_ioctl_feature_flags[2]) +#define BTRFS_IOC_GET_SUPPORTED_FEATURES _IOR(BTRFS_IOCTL_MAGIC, 57, \ + struct btrfs_ioctl_feature_flags[3]) +#define BTRFS_IOC_RM_DEV_V2 _IOW(BTRFS_IOCTL_MAGIC, 58, \ + struct btrfs_ioctl_vol_args_v2) +#define BTRFS_IOC_LOGICAL_INO_V2 _IOWR(BTRFS_IOCTL_MAGIC, 59, \ + struct btrfs_ioctl_logical_ino_args) +#define BTRFS_IOC_GET_SUBVOL_INFO _IOR(BTRFS_IOCTL_MAGIC, 60, \ + struct btrfs_ioctl_get_subvol_info_args) +#define BTRFS_IOC_GET_SUBVOL_ROOTREF _IOWR(BTRFS_IOCTL_MAGIC, 61, \ + struct btrfs_ioctl_get_subvol_rootref_args) +#define BTRFS_IOC_INO_LOOKUP_USER _IOWR(BTRFS_IOCTL_MAGIC, 62, \ + struct btrfs_ioctl_ino_lookup_user_args) +#define BTRFS_IOC_SNAP_DESTROY_V2 _IOW(BTRFS_IOCTL_MAGIC, 63, \ + struct btrfs_ioctl_vol_args_v2) +#define BTRFS_IOC_ENCODED_READ _IOR(BTRFS_IOCTL_MAGIC, 64, \ + struct btrfs_ioctl_encoded_io_args) +#define BTRFS_IOC_ENCODED_WRITE _IOW(BTRFS_IOCTL_MAGIC, 64, \ + struct btrfs_ioctl_encoded_io_args) + +#ifdef __cplusplus +} +#endif + +#endif /* _UAPI_LINUX_BTRFS_H */ diff --git a/src/basic/linux/btrfs_tree.h b/src/basic/linux/btrfs_tree.h new file mode 100644 index 0000000..ab38d0f --- /dev/null +++ b/src/basic/linux/btrfs_tree.h @@ -0,0 +1,1260 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _BTRFS_CTREE_H_ +#define _BTRFS_CTREE_H_ + +#include <linux/btrfs.h> +#include <linux/types.h> +#ifdef __KERNEL__ +#include <linux/stddef.h> +#else +#include <stddef.h> +#endif + +/* ASCII for _BHRfS_M, no terminating nul */ +#define BTRFS_MAGIC 0x4D5F53665248425FULL + +#define BTRFS_MAX_LEVEL 8 + +/* + * We can actually store much bigger names, but lets not confuse the rest of + * linux. + */ +#define BTRFS_NAME_LEN 255 + +/* + * Theoretical limit is larger, but we keep this down to a sane value. That + * should limit greatly the possibility of collisions on inode ref items. + */ +#define BTRFS_LINK_MAX 65535U + +/* + * This header contains the structure definitions and constants used + * by file system objects that can be retrieved using + * the BTRFS_IOC_SEARCH_TREE ioctl. That means basically anything that + * is needed to describe a leaf node's key or item contents. + */ + +/* holds pointers to all of the tree roots */ +#define BTRFS_ROOT_TREE_OBJECTID 1ULL + +/* stores information about which extents are in use, and reference counts */ +#define BTRFS_EXTENT_TREE_OBJECTID 2ULL + +/* + * chunk tree stores translations from logical -> physical block numbering + * the super block points to the chunk tree + */ +#define BTRFS_CHUNK_TREE_OBJECTID 3ULL + +/* + * stores information about which areas of a given device are in use. + * one per device. The tree of tree roots points to the device tree + */ +#define BTRFS_DEV_TREE_OBJECTID 4ULL + +/* one per subvolume, storing files and directories */ +#define BTRFS_FS_TREE_OBJECTID 5ULL + +/* directory objectid inside the root tree */ +#define BTRFS_ROOT_TREE_DIR_OBJECTID 6ULL + +/* holds checksums of all the data extents */ +#define BTRFS_CSUM_TREE_OBJECTID 7ULL + +/* holds quota configuration and tracking */ +#define BTRFS_QUOTA_TREE_OBJECTID 8ULL + +/* for storing items that use the BTRFS_UUID_KEY* types */ +#define BTRFS_UUID_TREE_OBJECTID 9ULL + +/* tracks free space in block groups. */ +#define BTRFS_FREE_SPACE_TREE_OBJECTID 10ULL + +/* Holds the block group items for extent tree v2. */ +#define BTRFS_BLOCK_GROUP_TREE_OBJECTID 11ULL + +/* device stats in the device tree */ +#define BTRFS_DEV_STATS_OBJECTID 0ULL + +/* for storing balance parameters in the root tree */ +#define BTRFS_BALANCE_OBJECTID -4ULL + +/* orphan objectid for tracking unlinked/truncated files */ +#define BTRFS_ORPHAN_OBJECTID -5ULL + +/* does write ahead logging to speed up fsyncs */ +#define BTRFS_TREE_LOG_OBJECTID -6ULL +#define BTRFS_TREE_LOG_FIXUP_OBJECTID -7ULL + +/* for space balancing */ +#define BTRFS_TREE_RELOC_OBJECTID -8ULL +#define BTRFS_DATA_RELOC_TREE_OBJECTID -9ULL + +/* + * extent checksums all have this objectid + * this allows them to share the logging tree + * for fsyncs + */ +#define BTRFS_EXTENT_CSUM_OBJECTID -10ULL + +/* For storing free space cache */ +#define BTRFS_FREE_SPACE_OBJECTID -11ULL + +/* + * The inode number assigned to the special inode for storing + * free ino cache + */ +#define BTRFS_FREE_INO_OBJECTID -12ULL + +/* dummy objectid represents multiple objectids */ +#define BTRFS_MULTIPLE_OBJECTIDS -255ULL + +/* + * All files have objectids in this range. + */ +#define BTRFS_FIRST_FREE_OBJECTID 256ULL +#define BTRFS_LAST_FREE_OBJECTID -256ULL +#define BTRFS_FIRST_CHUNK_TREE_OBJECTID 256ULL + + +/* + * the device items go into the chunk tree. The key is in the form + * [ 1 BTRFS_DEV_ITEM_KEY device_id ] + */ +#define BTRFS_DEV_ITEMS_OBJECTID 1ULL + +#define BTRFS_BTREE_INODE_OBJECTID 1 + +#define BTRFS_EMPTY_SUBVOL_DIR_OBJECTID 2 + +#define BTRFS_DEV_REPLACE_DEVID 0ULL + +/* + * inode items have the data typically returned from stat and store other + * info about object characteristics. There is one for every file and dir in + * the FS + */ +#define BTRFS_INODE_ITEM_KEY 1 +#define BTRFS_INODE_REF_KEY 12 +#define BTRFS_INODE_EXTREF_KEY 13 +#define BTRFS_XATTR_ITEM_KEY 24 + +/* + * fs verity items are stored under two different key types on disk. + * The descriptor items: + * [ inode objectid, BTRFS_VERITY_DESC_ITEM_KEY, offset ] + * + * At offset 0, we store a btrfs_verity_descriptor_item which tracks the size + * of the descriptor item and some extra data for encryption. + * Starting at offset 1, these hold the generic fs verity descriptor. The + * latter are opaque to btrfs, we just read and write them as a blob for the + * higher level verity code. The most common descriptor size is 256 bytes. + * + * The merkle tree items: + * [ inode objectid, BTRFS_VERITY_MERKLE_ITEM_KEY, offset ] + * + * These also start at offset 0, and correspond to the merkle tree bytes. When + * fsverity asks for page 0 of the merkle tree, we pull up one page starting at + * offset 0 for this key type. These are also opaque to btrfs, we're blindly + * storing whatever fsverity sends down. + */ +#define BTRFS_VERITY_DESC_ITEM_KEY 36 +#define BTRFS_VERITY_MERKLE_ITEM_KEY 37 + +#define BTRFS_ORPHAN_ITEM_KEY 48 +/* reserve 2-15 close to the inode for later flexibility */ + +/* + * dir items are the name -> inode pointers in a directory. There is one + * for every name in a directory. BTRFS_DIR_LOG_ITEM_KEY is no longer used + * but it's still defined here for documentation purposes and to help avoid + * having its numerical value reused in the future. + */ +#define BTRFS_DIR_LOG_ITEM_KEY 60 +#define BTRFS_DIR_LOG_INDEX_KEY 72 +#define BTRFS_DIR_ITEM_KEY 84 +#define BTRFS_DIR_INDEX_KEY 96 +/* + * extent data is for file data + */ +#define BTRFS_EXTENT_DATA_KEY 108 + +/* + * extent csums are stored in a separate tree and hold csums for + * an entire extent on disk. + */ +#define BTRFS_EXTENT_CSUM_KEY 128 + +/* + * root items point to tree roots. They are typically in the root + * tree used by the super block to find all the other trees + */ +#define BTRFS_ROOT_ITEM_KEY 132 + +/* + * root backrefs tie subvols and snapshots to the directory entries that + * reference them + */ +#define BTRFS_ROOT_BACKREF_KEY 144 + +/* + * root refs make a fast index for listing all of the snapshots and + * subvolumes referenced by a given root. They point directly to the + * directory item in the root that references the subvol + */ +#define BTRFS_ROOT_REF_KEY 156 + +/* + * extent items are in the extent map tree. These record which blocks + * are used, and how many references there are to each block + */ +#define BTRFS_EXTENT_ITEM_KEY 168 + +/* + * The same as the BTRFS_EXTENT_ITEM_KEY, except it's metadata we already know + * the length, so we save the level in key->offset instead of the length. + */ +#define BTRFS_METADATA_ITEM_KEY 169 + +#define BTRFS_TREE_BLOCK_REF_KEY 176 + +#define BTRFS_EXTENT_DATA_REF_KEY 178 + +#define BTRFS_EXTENT_REF_V0_KEY 180 + +#define BTRFS_SHARED_BLOCK_REF_KEY 182 + +#define BTRFS_SHARED_DATA_REF_KEY 184 + +/* + * block groups give us hints into the extent allocation trees. Which + * blocks are free etc etc + */ +#define BTRFS_BLOCK_GROUP_ITEM_KEY 192 + +/* + * Every block group is represented in the free space tree by a free space info + * item, which stores some accounting information. It is keyed on + * (block_group_start, FREE_SPACE_INFO, block_group_length). + */ +#define BTRFS_FREE_SPACE_INFO_KEY 198 + +/* + * A free space extent tracks an extent of space that is free in a block group. + * It is keyed on (start, FREE_SPACE_EXTENT, length). + */ +#define BTRFS_FREE_SPACE_EXTENT_KEY 199 + +/* + * When a block group becomes very fragmented, we convert it to use bitmaps + * instead of extents. A free space bitmap is keyed on + * (start, FREE_SPACE_BITMAP, length); the corresponding item is a bitmap with + * (length / sectorsize) bits. + */ +#define BTRFS_FREE_SPACE_BITMAP_KEY 200 + +#define BTRFS_DEV_EXTENT_KEY 204 +#define BTRFS_DEV_ITEM_KEY 216 +#define BTRFS_CHUNK_ITEM_KEY 228 + +/* + * Records the overall state of the qgroups. + * There's only one instance of this key present, + * (0, BTRFS_QGROUP_STATUS_KEY, 0) + */ +#define BTRFS_QGROUP_STATUS_KEY 240 +/* + * Records the currently used space of the qgroup. + * One key per qgroup, (0, BTRFS_QGROUP_INFO_KEY, qgroupid). + */ +#define BTRFS_QGROUP_INFO_KEY 242 +/* + * Contains the user configured limits for the qgroup. + * One key per qgroup, (0, BTRFS_QGROUP_LIMIT_KEY, qgroupid). + */ +#define BTRFS_QGROUP_LIMIT_KEY 244 +/* + * Records the child-parent relationship of qgroups. For + * each relation, 2 keys are present: + * (childid, BTRFS_QGROUP_RELATION_KEY, parentid) + * (parentid, BTRFS_QGROUP_RELATION_KEY, childid) + */ +#define BTRFS_QGROUP_RELATION_KEY 246 + +/* + * Obsolete name, see BTRFS_TEMPORARY_ITEM_KEY. + */ +#define BTRFS_BALANCE_ITEM_KEY 248 + +/* + * The key type for tree items that are stored persistently, but do not need to + * exist for extended period of time. The items can exist in any tree. + * + * [subtype, BTRFS_TEMPORARY_ITEM_KEY, data] + * + * Existing items: + * + * - balance status item + * (BTRFS_BALANCE_OBJECTID, BTRFS_TEMPORARY_ITEM_KEY, 0) + */ +#define BTRFS_TEMPORARY_ITEM_KEY 248 + +/* + * Obsolete name, see BTRFS_PERSISTENT_ITEM_KEY + */ +#define BTRFS_DEV_STATS_KEY 249 + +/* + * The key type for tree items that are stored persistently and usually exist + * for a long period, eg. filesystem lifetime. The item kinds can be status + * information, stats or preference values. The item can exist in any tree. + * + * [subtype, BTRFS_PERSISTENT_ITEM_KEY, data] + * + * Existing items: + * + * - device statistics, store IO stats in the device tree, one key for all + * stats + * (BTRFS_DEV_STATS_OBJECTID, BTRFS_DEV_STATS_KEY, 0) + */ +#define BTRFS_PERSISTENT_ITEM_KEY 249 + +/* + * Persistently stores the device replace state in the device tree. + * The key is built like this: (0, BTRFS_DEV_REPLACE_KEY, 0). + */ +#define BTRFS_DEV_REPLACE_KEY 250 + +/* + * Stores items that allow to quickly map UUIDs to something else. + * These items are part of the filesystem UUID tree. + * The key is built like this: + * (UUID_upper_64_bits, BTRFS_UUID_KEY*, UUID_lower_64_bits). + */ +#if BTRFS_UUID_SIZE != 16 +#error "UUID items require BTRFS_UUID_SIZE == 16!" +#endif +#define BTRFS_UUID_KEY_SUBVOL 251 /* for UUIDs assigned to subvols */ +#define BTRFS_UUID_KEY_RECEIVED_SUBVOL 252 /* for UUIDs assigned to + * received subvols */ + +/* + * string items are for debugging. They just store a short string of + * data in the FS + */ +#define BTRFS_STRING_ITEM_KEY 253 + +/* Maximum metadata block size (nodesize) */ +#define BTRFS_MAX_METADATA_BLOCKSIZE 65536 + +/* 32 bytes in various csum fields */ +#define BTRFS_CSUM_SIZE 32 + +/* csum types */ +enum btrfs_csum_type { + BTRFS_CSUM_TYPE_CRC32 = 0, + BTRFS_CSUM_TYPE_XXHASH = 1, + BTRFS_CSUM_TYPE_SHA256 = 2, + BTRFS_CSUM_TYPE_BLAKE2 = 3, +}; + +/* + * flags definitions for directory entry item type + * + * Used by: + * struct btrfs_dir_item.type + * + * Values 0..7 must match common file type values in fs_types.h. + */ +#define BTRFS_FT_UNKNOWN 0 +#define BTRFS_FT_REG_FILE 1 +#define BTRFS_FT_DIR 2 +#define BTRFS_FT_CHRDEV 3 +#define BTRFS_FT_BLKDEV 4 +#define BTRFS_FT_FIFO 5 +#define BTRFS_FT_SOCK 6 +#define BTRFS_FT_SYMLINK 7 +#define BTRFS_FT_XATTR 8 +#define BTRFS_FT_MAX 9 +/* Directory contains encrypted data */ +#define BTRFS_FT_ENCRYPTED 0x80 + +static inline __u8 btrfs_dir_flags_to_ftype(__u8 flags) +{ + return flags & ~BTRFS_FT_ENCRYPTED; +} + +/* + * Inode flags + */ +#define BTRFS_INODE_NODATASUM (1U << 0) +#define BTRFS_INODE_NODATACOW (1U << 1) +#define BTRFS_INODE_READONLY (1U << 2) +#define BTRFS_INODE_NOCOMPRESS (1U << 3) +#define BTRFS_INODE_PREALLOC (1U << 4) +#define BTRFS_INODE_SYNC (1U << 5) +#define BTRFS_INODE_IMMUTABLE (1U << 6) +#define BTRFS_INODE_APPEND (1U << 7) +#define BTRFS_INODE_NODUMP (1U << 8) +#define BTRFS_INODE_NOATIME (1U << 9) +#define BTRFS_INODE_DIRSYNC (1U << 10) +#define BTRFS_INODE_COMPRESS (1U << 11) + +#define BTRFS_INODE_ROOT_ITEM_INIT (1U << 31) + +#define BTRFS_INODE_FLAG_MASK \ + (BTRFS_INODE_NODATASUM | \ + BTRFS_INODE_NODATACOW | \ + BTRFS_INODE_READONLY | \ + BTRFS_INODE_NOCOMPRESS | \ + BTRFS_INODE_PREALLOC | \ + BTRFS_INODE_SYNC | \ + BTRFS_INODE_IMMUTABLE | \ + BTRFS_INODE_APPEND | \ + BTRFS_INODE_NODUMP | \ + BTRFS_INODE_NOATIME | \ + BTRFS_INODE_DIRSYNC | \ + BTRFS_INODE_COMPRESS | \ + BTRFS_INODE_ROOT_ITEM_INIT) + +#define BTRFS_INODE_RO_VERITY (1U << 0) + +#define BTRFS_INODE_RO_FLAG_MASK (BTRFS_INODE_RO_VERITY) + +/* + * The key defines the order in the tree, and so it also defines (optimal) + * block layout. + * + * objectid corresponds to the inode number. + * + * type tells us things about the object, and is a kind of stream selector. + * so for a given inode, keys with type of 1 might refer to the inode data, + * type of 2 may point to file data in the btree and type == 3 may point to + * extents. + * + * offset is the starting byte offset for this key in the stream. + * + * btrfs_disk_key is in disk byte order. struct btrfs_key is always + * in cpu native order. Otherwise they are identical and their sizes + * should be the same (ie both packed) + */ +struct btrfs_disk_key { + __le64 objectid; + __u8 type; + __le64 offset; +} __attribute__ ((__packed__)); + +struct btrfs_key { + __u64 objectid; + __u8 type; + __u64 offset; +} __attribute__ ((__packed__)); + +/* + * Every tree block (leaf or node) starts with this header. + */ +struct btrfs_header { + /* These first four must match the super block */ + __u8 csum[BTRFS_CSUM_SIZE]; + /* FS specific uuid */ + __u8 fsid[BTRFS_FSID_SIZE]; + /* Which block this node is supposed to live in */ + __le64 bytenr; + __le64 flags; + + /* Allowed to be different from the super from here on down */ + __u8 chunk_tree_uuid[BTRFS_UUID_SIZE]; + __le64 generation; + __le64 owner; + __le32 nritems; + __u8 level; +} __attribute__ ((__packed__)); + +/* + * This is a very generous portion of the super block, giving us room to + * translate 14 chunks with 3 stripes each. + */ +#define BTRFS_SYSTEM_CHUNK_ARRAY_SIZE 2048 + +/* + * Just in case we somehow lose the roots and are not able to mount, we store + * an array of the roots from previous transactions in the super. + */ +#define BTRFS_NUM_BACKUP_ROOTS 4 +struct btrfs_root_backup { + __le64 tree_root; + __le64 tree_root_gen; + + __le64 chunk_root; + __le64 chunk_root_gen; + + __le64 extent_root; + __le64 extent_root_gen; + + __le64 fs_root; + __le64 fs_root_gen; + + __le64 dev_root; + __le64 dev_root_gen; + + __le64 csum_root; + __le64 csum_root_gen; + + __le64 total_bytes; + __le64 bytes_used; + __le64 num_devices; + /* future */ + __le64 unused_64[4]; + + __u8 tree_root_level; + __u8 chunk_root_level; + __u8 extent_root_level; + __u8 fs_root_level; + __u8 dev_root_level; + __u8 csum_root_level; + /* future and to align */ + __u8 unused_8[10]; +} __attribute__ ((__packed__)); + +/* + * A leaf is full of items. offset and size tell us where to find the item in + * the leaf (relative to the start of the data area) + */ +struct btrfs_item { + struct btrfs_disk_key key; + __le32 offset; + __le32 size; +} __attribute__ ((__packed__)); + +/* + * Leaves have an item area and a data area: + * [item0, item1....itemN] [free space] [dataN...data1, data0] + * + * The data is separate from the items to get the keys closer together during + * searches. + */ +struct btrfs_leaf { + struct btrfs_header header; + struct btrfs_item items[]; +} __attribute__ ((__packed__)); + +/* + * All non-leaf blocks are nodes, they hold only keys and pointers to other + * blocks. + */ +struct btrfs_key_ptr { + struct btrfs_disk_key key; + __le64 blockptr; + __le64 generation; +} __attribute__ ((__packed__)); + +struct btrfs_node { + struct btrfs_header header; + struct btrfs_key_ptr ptrs[]; +} __attribute__ ((__packed__)); + +struct btrfs_dev_item { + /* the internal btrfs device id */ + __le64 devid; + + /* size of the device */ + __le64 total_bytes; + + /* bytes used */ + __le64 bytes_used; + + /* optimal io alignment for this device */ + __le32 io_align; + + /* optimal io width for this device */ + __le32 io_width; + + /* minimal io size for this device */ + __le32 sector_size; + + /* type and info about this device */ + __le64 type; + + /* expected generation for this device */ + __le64 generation; + + /* + * starting byte of this partition on the device, + * to allow for stripe alignment in the future + */ + __le64 start_offset; + + /* grouping information for allocation decisions */ + __le32 dev_group; + + /* seek speed 0-100 where 100 is fastest */ + __u8 seek_speed; + + /* bandwidth 0-100 where 100 is fastest */ + __u8 bandwidth; + + /* btrfs generated uuid for this device */ + __u8 uuid[BTRFS_UUID_SIZE]; + + /* uuid of FS who owns this device */ + __u8 fsid[BTRFS_UUID_SIZE]; +} __attribute__ ((__packed__)); + +struct btrfs_stripe { + __le64 devid; + __le64 offset; + __u8 dev_uuid[BTRFS_UUID_SIZE]; +} __attribute__ ((__packed__)); + +struct btrfs_chunk { + /* size of this chunk in bytes */ + __le64 length; + + /* objectid of the root referencing this chunk */ + __le64 owner; + + __le64 stripe_len; + __le64 type; + + /* optimal io alignment for this chunk */ + __le32 io_align; + + /* optimal io width for this chunk */ + __le32 io_width; + + /* minimal io size for this chunk */ + __le32 sector_size; + + /* 2^16 stripes is quite a lot, a second limit is the size of a single + * item in the btree + */ + __le16 num_stripes; + + /* sub stripes only matter for raid10 */ + __le16 sub_stripes; + struct btrfs_stripe stripe; + /* additional stripes go here */ +} __attribute__ ((__packed__)); + +/* + * The super block basically lists the main trees of the FS. + */ +struct btrfs_super_block { + /* The first 4 fields must match struct btrfs_header */ + __u8 csum[BTRFS_CSUM_SIZE]; + /* FS specific UUID, visible to user */ + __u8 fsid[BTRFS_FSID_SIZE]; + /* This block number */ + __le64 bytenr; + __le64 flags; + + /* Allowed to be different from the btrfs_header from here own down */ + __le64 magic; + __le64 generation; + __le64 root; + __le64 chunk_root; + __le64 log_root; + + /* + * This member has never been utilized since the very beginning, thus + * it's always 0 regardless of kernel version. We always use + * generation + 1 to read log tree root. So here we mark it deprecated. + */ + __le64 __unused_log_root_transid; + __le64 total_bytes; + __le64 bytes_used; + __le64 root_dir_objectid; + __le64 num_devices; + __le32 sectorsize; + __le32 nodesize; + __le32 __unused_leafsize; + __le32 stripesize; + __le32 sys_chunk_array_size; + __le64 chunk_root_generation; + __le64 compat_flags; + __le64 compat_ro_flags; + __le64 incompat_flags; + __le16 csum_type; + __u8 root_level; + __u8 chunk_root_level; + __u8 log_root_level; + struct btrfs_dev_item dev_item; + + char label[BTRFS_LABEL_SIZE]; + + __le64 cache_generation; + __le64 uuid_tree_generation; + + /* The UUID written into btree blocks */ + __u8 metadata_uuid[BTRFS_FSID_SIZE]; + + __u64 nr_global_roots; + + /* Future expansion */ + __le64 reserved[27]; + __u8 sys_chunk_array[BTRFS_SYSTEM_CHUNK_ARRAY_SIZE]; + struct btrfs_root_backup super_roots[BTRFS_NUM_BACKUP_ROOTS]; + + /* Padded to 4096 bytes */ + __u8 padding[565]; +} __attribute__ ((__packed__)); + +#define BTRFS_FREE_SPACE_EXTENT 1 +#define BTRFS_FREE_SPACE_BITMAP 2 + +struct btrfs_free_space_entry { + __le64 offset; + __le64 bytes; + __u8 type; +} __attribute__ ((__packed__)); + +struct btrfs_free_space_header { + struct btrfs_disk_key location; + __le64 generation; + __le64 num_entries; + __le64 num_bitmaps; +} __attribute__ ((__packed__)); + +#define BTRFS_HEADER_FLAG_WRITTEN (1ULL << 0) +#define BTRFS_HEADER_FLAG_RELOC (1ULL << 1) + +/* Super block flags */ +/* Errors detected */ +#define BTRFS_SUPER_FLAG_ERROR (1ULL << 2) + +#define BTRFS_SUPER_FLAG_SEEDING (1ULL << 32) +#define BTRFS_SUPER_FLAG_METADUMP (1ULL << 33) +#define BTRFS_SUPER_FLAG_METADUMP_V2 (1ULL << 34) +#define BTRFS_SUPER_FLAG_CHANGING_FSID (1ULL << 35) +#define BTRFS_SUPER_FLAG_CHANGING_FSID_V2 (1ULL << 36) + + +/* + * items in the extent btree are used to record the objectid of the + * owner of the block and the number of references + */ + +struct btrfs_extent_item { + __le64 refs; + __le64 generation; + __le64 flags; +} __attribute__ ((__packed__)); + +struct btrfs_extent_item_v0 { + __le32 refs; +} __attribute__ ((__packed__)); + + +#define BTRFS_EXTENT_FLAG_DATA (1ULL << 0) +#define BTRFS_EXTENT_FLAG_TREE_BLOCK (1ULL << 1) + +/* following flags only apply to tree blocks */ + +/* use full backrefs for extent pointers in the block */ +#define BTRFS_BLOCK_FLAG_FULL_BACKREF (1ULL << 8) + +#define BTRFS_BACKREF_REV_MAX 256 +#define BTRFS_BACKREF_REV_SHIFT 56 +#define BTRFS_BACKREF_REV_MASK (((u64)BTRFS_BACKREF_REV_MAX - 1) << \ + BTRFS_BACKREF_REV_SHIFT) + +#define BTRFS_OLD_BACKREF_REV 0 +#define BTRFS_MIXED_BACKREF_REV 1 + +/* + * this flag is only used internally by scrub and may be changed at any time + * it is only declared here to avoid collisions + */ +#define BTRFS_EXTENT_FLAG_SUPER (1ULL << 48) + +struct btrfs_tree_block_info { + struct btrfs_disk_key key; + __u8 level; +} __attribute__ ((__packed__)); + +struct btrfs_extent_data_ref { + __le64 root; + __le64 objectid; + __le64 offset; + __le32 count; +} __attribute__ ((__packed__)); + +struct btrfs_shared_data_ref { + __le32 count; +} __attribute__ ((__packed__)); + +struct btrfs_extent_inline_ref { + __u8 type; + __le64 offset; +} __attribute__ ((__packed__)); + +/* dev extents record free space on individual devices. The owner + * field points back to the chunk allocation mapping tree that allocated + * the extent. The chunk tree uuid field is a way to double check the owner + */ +struct btrfs_dev_extent { + __le64 chunk_tree; + __le64 chunk_objectid; + __le64 chunk_offset; + __le64 length; + __u8 chunk_tree_uuid[BTRFS_UUID_SIZE]; +} __attribute__ ((__packed__)); + +struct btrfs_inode_ref { + __le64 index; + __le16 name_len; + /* name goes here */ +} __attribute__ ((__packed__)); + +struct btrfs_inode_extref { + __le64 parent_objectid; + __le64 index; + __le16 name_len; + __u8 name[]; + /* name goes here */ +} __attribute__ ((__packed__)); + +struct btrfs_timespec { + __le64 sec; + __le32 nsec; +} __attribute__ ((__packed__)); + +struct btrfs_inode_item { + /* nfs style generation number */ + __le64 generation; + /* transid that last touched this inode */ + __le64 transid; + __le64 size; + __le64 nbytes; + __le64 block_group; + __le32 nlink; + __le32 uid; + __le32 gid; + __le32 mode; + __le64 rdev; + __le64 flags; + + /* modification sequence number for NFS */ + __le64 sequence; + + /* + * a little future expansion, for more than this we can + * just grow the inode item and version it + */ + __le64 reserved[4]; + struct btrfs_timespec atime; + struct btrfs_timespec ctime; + struct btrfs_timespec mtime; + struct btrfs_timespec otime; +} __attribute__ ((__packed__)); + +struct btrfs_dir_log_item { + __le64 end; +} __attribute__ ((__packed__)); + +struct btrfs_dir_item { + struct btrfs_disk_key location; + __le64 transid; + __le16 data_len; + __le16 name_len; + __u8 type; +} __attribute__ ((__packed__)); + +#define BTRFS_ROOT_SUBVOL_RDONLY (1ULL << 0) + +/* + * Internal in-memory flag that a subvolume has been marked for deletion but + * still visible as a directory + */ +#define BTRFS_ROOT_SUBVOL_DEAD (1ULL << 48) + +struct btrfs_root_item { + struct btrfs_inode_item inode; + __le64 generation; + __le64 root_dirid; + __le64 bytenr; + __le64 byte_limit; + __le64 bytes_used; + __le64 last_snapshot; + __le64 flags; + __le32 refs; + struct btrfs_disk_key drop_progress; + __u8 drop_level; + __u8 level; + + /* + * The following fields appear after subvol_uuids+subvol_times + * were introduced. + */ + + /* + * This generation number is used to test if the new fields are valid + * and up to date while reading the root item. Every time the root item + * is written out, the "generation" field is copied into this field. If + * anyone ever mounted the fs with an older kernel, we will have + * mismatching generation values here and thus must invalidate the + * new fields. See btrfs_update_root and btrfs_find_last_root for + * details. + * the offset of generation_v2 is also used as the start for the memset + * when invalidating the fields. + */ + __le64 generation_v2; + __u8 uuid[BTRFS_UUID_SIZE]; + __u8 parent_uuid[BTRFS_UUID_SIZE]; + __u8 received_uuid[BTRFS_UUID_SIZE]; + __le64 ctransid; /* updated when an inode changes */ + __le64 otransid; /* trans when created */ + __le64 stransid; /* trans when sent. non-zero for received subvol */ + __le64 rtransid; /* trans when received. non-zero for received subvol */ + struct btrfs_timespec ctime; + struct btrfs_timespec otime; + struct btrfs_timespec stime; + struct btrfs_timespec rtime; + __le64 reserved[8]; /* for future */ +} __attribute__ ((__packed__)); + +/* + * Btrfs root item used to be smaller than current size. The old format ends + * at where member generation_v2 is. + */ +static inline __u32 btrfs_legacy_root_item_size(void) +{ + return offsetof(struct btrfs_root_item, generation_v2); +} + +/* + * this is used for both forward and backward root refs + */ +struct btrfs_root_ref { + __le64 dirid; + __le64 sequence; + __le16 name_len; +} __attribute__ ((__packed__)); + +struct btrfs_disk_balance_args { + /* + * profiles to operate on, single is denoted by + * BTRFS_AVAIL_ALLOC_BIT_SINGLE + */ + __le64 profiles; + + /* + * usage filter + * BTRFS_BALANCE_ARGS_USAGE with a single value means '0..N' + * BTRFS_BALANCE_ARGS_USAGE_RANGE - range syntax, min..max + */ + union { + __le64 usage; + struct { + __le32 usage_min; + __le32 usage_max; + }; + }; + + /* devid filter */ + __le64 devid; + + /* devid subset filter [pstart..pend) */ + __le64 pstart; + __le64 pend; + + /* btrfs virtual address space subset filter [vstart..vend) */ + __le64 vstart; + __le64 vend; + + /* + * profile to convert to, single is denoted by + * BTRFS_AVAIL_ALLOC_BIT_SINGLE + */ + __le64 target; + + /* BTRFS_BALANCE_ARGS_* */ + __le64 flags; + + /* + * BTRFS_BALANCE_ARGS_LIMIT with value 'limit' + * BTRFS_BALANCE_ARGS_LIMIT_RANGE - the extend version can use minimum + * and maximum + */ + union { + __le64 limit; + struct { + __le32 limit_min; + __le32 limit_max; + }; + }; + + /* + * Process chunks that cross stripes_min..stripes_max devices, + * BTRFS_BALANCE_ARGS_STRIPES_RANGE + */ + __le32 stripes_min; + __le32 stripes_max; + + __le64 unused[6]; +} __attribute__ ((__packed__)); + +/* + * store balance parameters to disk so that balance can be properly + * resumed after crash or unmount + */ +struct btrfs_balance_item { + /* BTRFS_BALANCE_* */ + __le64 flags; + + struct btrfs_disk_balance_args data; + struct btrfs_disk_balance_args meta; + struct btrfs_disk_balance_args sys; + + __le64 unused[4]; +} __attribute__ ((__packed__)); + +enum { + BTRFS_FILE_EXTENT_INLINE = 0, + BTRFS_FILE_EXTENT_REG = 1, + BTRFS_FILE_EXTENT_PREALLOC = 2, + BTRFS_NR_FILE_EXTENT_TYPES = 3, +}; + +struct btrfs_file_extent_item { + /* + * transaction id that created this extent + */ + __le64 generation; + /* + * max number of bytes to hold this extent in ram + * when we split a compressed extent we can't know how big + * each of the resulting pieces will be. So, this is + * an upper limit on the size of the extent in ram instead of + * an exact limit. + */ + __le64 ram_bytes; + + /* + * 32 bits for the various ways we might encode the data, + * including compression and encryption. If any of these + * are set to something a given disk format doesn't understand + * it is treated like an incompat flag for reading and writing, + * but not for stat. + */ + __u8 compression; + __u8 encryption; + __le16 other_encoding; /* spare for later use */ + + /* are we inline data or a real extent? */ + __u8 type; + + /* + * disk space consumed by the extent, checksum blocks are included + * in these numbers + * + * At this offset in the structure, the inline extent data start. + */ + __le64 disk_bytenr; + __le64 disk_num_bytes; + /* + * the logical offset in file blocks (no csums) + * this extent record is for. This allows a file extent to point + * into the middle of an existing extent on disk, sharing it + * between two snapshots (useful if some bytes in the middle of the + * extent have changed + */ + __le64 offset; + /* + * the logical number of file blocks (no csums included). This + * always reflects the size uncompressed and without encoding. + */ + __le64 num_bytes; + +} __attribute__ ((__packed__)); + +struct btrfs_csum_item { + __u8 csum; +} __attribute__ ((__packed__)); + +struct btrfs_dev_stats_item { + /* + * grow this item struct at the end for future enhancements and keep + * the existing values unchanged + */ + __le64 values[BTRFS_DEV_STAT_VALUES_MAX]; +} __attribute__ ((__packed__)); + +#define BTRFS_DEV_REPLACE_ITEM_CONT_READING_FROM_SRCDEV_MODE_ALWAYS 0 +#define BTRFS_DEV_REPLACE_ITEM_CONT_READING_FROM_SRCDEV_MODE_AVOID 1 + +struct btrfs_dev_replace_item { + /* + * grow this item struct at the end for future enhancements and keep + * the existing values unchanged + */ + __le64 src_devid; + __le64 cursor_left; + __le64 cursor_right; + __le64 cont_reading_from_srcdev_mode; + + __le64 replace_state; + __le64 time_started; + __le64 time_stopped; + __le64 num_write_errors; + __le64 num_uncorrectable_read_errors; +} __attribute__ ((__packed__)); + +/* different types of block groups (and chunks) */ +#define BTRFS_BLOCK_GROUP_DATA (1ULL << 0) +#define BTRFS_BLOCK_GROUP_SYSTEM (1ULL << 1) +#define BTRFS_BLOCK_GROUP_METADATA (1ULL << 2) +#define BTRFS_BLOCK_GROUP_RAID0 (1ULL << 3) +#define BTRFS_BLOCK_GROUP_RAID1 (1ULL << 4) +#define BTRFS_BLOCK_GROUP_DUP (1ULL << 5) +#define BTRFS_BLOCK_GROUP_RAID10 (1ULL << 6) +#define BTRFS_BLOCK_GROUP_RAID5 (1ULL << 7) +#define BTRFS_BLOCK_GROUP_RAID6 (1ULL << 8) +#define BTRFS_BLOCK_GROUP_RAID1C3 (1ULL << 9) +#define BTRFS_BLOCK_GROUP_RAID1C4 (1ULL << 10) +#define BTRFS_BLOCK_GROUP_RESERVED (BTRFS_AVAIL_ALLOC_BIT_SINGLE | \ + BTRFS_SPACE_INFO_GLOBAL_RSV) + +#define BTRFS_BLOCK_GROUP_TYPE_MASK (BTRFS_BLOCK_GROUP_DATA | \ + BTRFS_BLOCK_GROUP_SYSTEM | \ + BTRFS_BLOCK_GROUP_METADATA) + +#define BTRFS_BLOCK_GROUP_PROFILE_MASK (BTRFS_BLOCK_GROUP_RAID0 | \ + BTRFS_BLOCK_GROUP_RAID1 | \ + BTRFS_BLOCK_GROUP_RAID1C3 | \ + BTRFS_BLOCK_GROUP_RAID1C4 | \ + BTRFS_BLOCK_GROUP_RAID5 | \ + BTRFS_BLOCK_GROUP_RAID6 | \ + BTRFS_BLOCK_GROUP_DUP | \ + BTRFS_BLOCK_GROUP_RAID10) +#define BTRFS_BLOCK_GROUP_RAID56_MASK (BTRFS_BLOCK_GROUP_RAID5 | \ + BTRFS_BLOCK_GROUP_RAID6) + +#define BTRFS_BLOCK_GROUP_RAID1_MASK (BTRFS_BLOCK_GROUP_RAID1 | \ + BTRFS_BLOCK_GROUP_RAID1C3 | \ + BTRFS_BLOCK_GROUP_RAID1C4) + +/* + * We need a bit for restriper to be able to tell when chunks of type + * SINGLE are available. This "extended" profile format is used in + * fs_info->avail_*_alloc_bits (in-memory) and balance item fields + * (on-disk). The corresponding on-disk bit in chunk.type is reserved + * to avoid remappings between two formats in future. + */ +#define BTRFS_AVAIL_ALLOC_BIT_SINGLE (1ULL << 48) + +/* + * A fake block group type that is used to communicate global block reserve + * size to userspace via the SPACE_INFO ioctl. + */ +#define BTRFS_SPACE_INFO_GLOBAL_RSV (1ULL << 49) + +#define BTRFS_EXTENDED_PROFILE_MASK (BTRFS_BLOCK_GROUP_PROFILE_MASK | \ + BTRFS_AVAIL_ALLOC_BIT_SINGLE) + +static inline __u64 chunk_to_extended(__u64 flags) +{ + if ((flags & BTRFS_BLOCK_GROUP_PROFILE_MASK) == 0) + flags |= BTRFS_AVAIL_ALLOC_BIT_SINGLE; + + return flags; +} +static inline __u64 extended_to_chunk(__u64 flags) +{ + return flags & ~BTRFS_AVAIL_ALLOC_BIT_SINGLE; +} + +struct btrfs_block_group_item { + __le64 used; + __le64 chunk_objectid; + __le64 flags; +} __attribute__ ((__packed__)); + +struct btrfs_free_space_info { + __le32 extent_count; + __le32 flags; +} __attribute__ ((__packed__)); + +#define BTRFS_FREE_SPACE_USING_BITMAPS (1ULL << 0) + +#define BTRFS_QGROUP_LEVEL_SHIFT 48 +static inline __u16 btrfs_qgroup_level(__u64 qgroupid) +{ + return (__u16)(qgroupid >> BTRFS_QGROUP_LEVEL_SHIFT); +} + +/* + * is subvolume quota turned on? + */ +#define BTRFS_QGROUP_STATUS_FLAG_ON (1ULL << 0) +/* + * RESCAN is set during the initialization phase + */ +#define BTRFS_QGROUP_STATUS_FLAG_RESCAN (1ULL << 1) +/* + * Some qgroup entries are known to be out of date, + * either because the configuration has changed in a way that + * makes a rescan necessary, or because the fs has been mounted + * with a non-qgroup-aware version. + * Turning qouta off and on again makes it inconsistent, too. + */ +#define BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT (1ULL << 2) + +#define BTRFS_QGROUP_STATUS_FLAGS_MASK (BTRFS_QGROUP_STATUS_FLAG_ON | \ + BTRFS_QGROUP_STATUS_FLAG_RESCAN | \ + BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT) + +#define BTRFS_QGROUP_STATUS_VERSION 1 + +struct btrfs_qgroup_status_item { + __le64 version; + /* + * the generation is updated during every commit. As older + * versions of btrfs are not aware of qgroups, it will be + * possible to detect inconsistencies by checking the + * generation on mount time + */ + __le64 generation; + + /* flag definitions see above */ + __le64 flags; + + /* + * only used during scanning to record the progress + * of the scan. It contains a logical address + */ + __le64 rescan; +} __attribute__ ((__packed__)); + +struct btrfs_qgroup_info_item { + __le64 generation; + __le64 rfer; + __le64 rfer_cmpr; + __le64 excl; + __le64 excl_cmpr; +} __attribute__ ((__packed__)); + +struct btrfs_qgroup_limit_item { + /* + * only updated when any of the other values change + */ + __le64 flags; + __le64 max_rfer; + __le64 max_excl; + __le64 rsv_rfer; + __le64 rsv_excl; +} __attribute__ ((__packed__)); + +struct btrfs_verity_descriptor_item { + /* Size of the verity descriptor in bytes */ + __le64 size; + /* + * When we implement support for fscrypt, we will need to encrypt the + * Merkle tree for encrypted verity files. These 128 bits are for the + * eventual storage of an fscrypt initialization vector. + */ + __le64 reserved[2]; + __u8 encryption; +} __attribute__ ((__packed__)); + +#endif /* _BTRFS_CTREE_H_ */ diff --git a/src/basic/linux/can/netlink.h b/src/basic/linux/can/netlink.h new file mode 100644 index 0000000..02ec32d --- /dev/null +++ b/src/basic/linux/can/netlink.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + * linux/can/netlink.h + * + * Definitions for the CAN netlink interface + * + * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UAPI_CAN_NETLINK_H +#define _UAPI_CAN_NETLINK_H + +#include <linux/types.h> + +/* + * CAN bit-timing parameters + * + * For further information, please read chapter "8 BIT TIMING + * REQUIREMENTS" of the "Bosch CAN Specification version 2.0" + * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf. + */ +struct can_bittiming { + __u32 bitrate; /* Bit-rate in bits/second */ + __u32 sample_point; /* Sample point in one-tenth of a percent */ + __u32 tq; /* Time quanta (TQ) in nanoseconds */ + __u32 prop_seg; /* Propagation segment in TQs */ + __u32 phase_seg1; /* Phase buffer segment 1 in TQs */ + __u32 phase_seg2; /* Phase buffer segment 2 in TQs */ + __u32 sjw; /* Synchronisation jump width in TQs */ + __u32 brp; /* Bit-rate prescaler */ +}; + +/* + * CAN hardware-dependent bit-timing constant + * + * Used for calculating and checking bit-timing parameters + */ +struct can_bittiming_const { + char name[16]; /* Name of the CAN controller hardware */ + __u32 tseg1_min; /* Time segment 1 = prop_seg + phase_seg1 */ + __u32 tseg1_max; + __u32 tseg2_min; /* Time segment 2 = phase_seg2 */ + __u32 tseg2_max; + __u32 sjw_max; /* Synchronisation jump width */ + __u32 brp_min; /* Bit-rate prescaler */ + __u32 brp_max; + __u32 brp_inc; +}; + +/* + * CAN clock parameters + */ +struct can_clock { + __u32 freq; /* CAN system clock frequency in Hz */ +}; + +/* + * CAN operational and error states + */ +enum can_state { + CAN_STATE_ERROR_ACTIVE = 0, /* RX/TX error count < 96 */ + CAN_STATE_ERROR_WARNING, /* RX/TX error count < 128 */ + CAN_STATE_ERROR_PASSIVE, /* RX/TX error count < 256 */ + CAN_STATE_BUS_OFF, /* RX/TX error count >= 256 */ + CAN_STATE_STOPPED, /* Device is stopped */ + CAN_STATE_SLEEPING, /* Device is sleeping */ + CAN_STATE_MAX +}; + +/* + * CAN bus error counters + */ +struct can_berr_counter { + __u16 txerr; + __u16 rxerr; +}; + +/* + * CAN controller mode + */ +struct can_ctrlmode { + __u32 mask; + __u32 flags; +}; + +#define CAN_CTRLMODE_LOOPBACK 0x01 /* Loopback mode */ +#define CAN_CTRLMODE_LISTENONLY 0x02 /* Listen-only mode */ +#define CAN_CTRLMODE_3_SAMPLES 0x04 /* Triple sampling mode */ +#define CAN_CTRLMODE_ONE_SHOT 0x08 /* One-Shot mode */ +#define CAN_CTRLMODE_BERR_REPORTING 0x10 /* Bus-error reporting */ +#define CAN_CTRLMODE_FD 0x20 /* CAN FD mode */ +#define CAN_CTRLMODE_PRESUME_ACK 0x40 /* Ignore missing CAN ACKs */ +#define CAN_CTRLMODE_FD_NON_ISO 0x80 /* CAN FD in non-ISO mode */ +#define CAN_CTRLMODE_CC_LEN8_DLC 0x100 /* Classic CAN DLC option */ +#define CAN_CTRLMODE_TDC_AUTO 0x200 /* CAN transiver automatically calculates TDCV */ +#define CAN_CTRLMODE_TDC_MANUAL 0x400 /* TDCV is manually set up by user */ + +/* + * CAN device statistics + */ +struct can_device_stats { + __u32 bus_error; /* Bus errors */ + __u32 error_warning; /* Changes to error warning state */ + __u32 error_passive; /* Changes to error passive state */ + __u32 bus_off; /* Changes to bus off state */ + __u32 arbitration_lost; /* Arbitration lost errors */ + __u32 restarts; /* CAN controller re-starts */ +}; + +/* + * CAN netlink interface + */ +enum { + IFLA_CAN_UNSPEC, + IFLA_CAN_BITTIMING, + IFLA_CAN_BITTIMING_CONST, + IFLA_CAN_CLOCK, + IFLA_CAN_STATE, + IFLA_CAN_CTRLMODE, + IFLA_CAN_RESTART_MS, + IFLA_CAN_RESTART, + IFLA_CAN_BERR_COUNTER, + IFLA_CAN_DATA_BITTIMING, + IFLA_CAN_DATA_BITTIMING_CONST, + IFLA_CAN_TERMINATION, + IFLA_CAN_TERMINATION_CONST, + IFLA_CAN_BITRATE_CONST, + IFLA_CAN_DATA_BITRATE_CONST, + IFLA_CAN_BITRATE_MAX, + IFLA_CAN_TDC, + IFLA_CAN_CTRLMODE_EXT, + + /* add new constants above here */ + __IFLA_CAN_MAX, + IFLA_CAN_MAX = __IFLA_CAN_MAX - 1 +}; + +/* + * CAN FD Transmitter Delay Compensation (TDC) + * + * Please refer to struct can_tdc_const and can_tdc in + * include/linux/can/bittiming.h for further details. + */ +enum { + IFLA_CAN_TDC_UNSPEC, + IFLA_CAN_TDC_TDCV_MIN, /* u32 */ + IFLA_CAN_TDC_TDCV_MAX, /* u32 */ + IFLA_CAN_TDC_TDCO_MIN, /* u32 */ + IFLA_CAN_TDC_TDCO_MAX, /* u32 */ + IFLA_CAN_TDC_TDCF_MIN, /* u32 */ + IFLA_CAN_TDC_TDCF_MAX, /* u32 */ + IFLA_CAN_TDC_TDCV, /* u32 */ + IFLA_CAN_TDC_TDCO, /* u32 */ + IFLA_CAN_TDC_TDCF, /* u32 */ + + /* add new constants above here */ + __IFLA_CAN_TDC, + IFLA_CAN_TDC_MAX = __IFLA_CAN_TDC - 1 +}; + +/* + * IFLA_CAN_CTRLMODE_EXT nest: controller mode extended parameters + */ +enum { + IFLA_CAN_CTRLMODE_UNSPEC, + IFLA_CAN_CTRLMODE_SUPPORTED, /* u32 */ + + /* add new constants above here */ + __IFLA_CAN_CTRLMODE, + IFLA_CAN_CTRLMODE_MAX = __IFLA_CAN_CTRLMODE - 1 +}; + +/* u16 termination range: 1..65535 Ohms */ +#define CAN_TERMINATION_DISABLED 0 + +#endif /* !_UAPI_CAN_NETLINK_H */ diff --git a/src/basic/linux/can/vxcan.h b/src/basic/linux/can/vxcan.h new file mode 100644 index 0000000..4fa9d87 --- /dev/null +++ b/src/basic/linux/can/vxcan.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +#ifndef _UAPI_CAN_VXCAN_H +#define _UAPI_CAN_VXCAN_H + +enum { + VXCAN_INFO_UNSPEC, + VXCAN_INFO_PEER, + + __VXCAN_INFO_MAX +#define VXCAN_INFO_MAX (__VXCAN_INFO_MAX - 1) +}; + +#endif diff --git a/src/basic/linux/cfm_bridge.h b/src/basic/linux/cfm_bridge.h new file mode 100644 index 0000000..3c1cbd1 --- /dev/null +++ b/src/basic/linux/cfm_bridge.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ + +#ifndef _UAPI_LINUX_CFM_BRIDGE_H_ +#define _UAPI_LINUX_CFM_BRIDGE_H_ + +#include <linux/types.h> +#include <linux/if_ether.h> + +#define ETHER_HEADER_LENGTH (6+6+4+2) +#define CFM_MAID_LENGTH 48 +#define CFM_CCM_PDU_LENGTH 75 +#define CFM_PORT_STATUS_TLV_LENGTH 4 +#define CFM_IF_STATUS_TLV_LENGTH 4 +#define CFM_IF_STATUS_TLV_TYPE 4 +#define CFM_PORT_STATUS_TLV_TYPE 2 +#define CFM_ENDE_TLV_TYPE 0 +#define CFM_CCM_MAX_FRAME_LENGTH (ETHER_HEADER_LENGTH+\ + CFM_CCM_PDU_LENGTH+\ + CFM_PORT_STATUS_TLV_LENGTH+\ + CFM_IF_STATUS_TLV_LENGTH) +#define CFM_FRAME_PRIO 7 +#define CFM_CCM_TLV_OFFSET 70 +#define CFM_CCM_PDU_MAID_OFFSET 10 +#define CFM_CCM_PDU_MEPID_OFFSET 8 +#define CFM_CCM_PDU_SEQNR_OFFSET 4 +#define CFM_CCM_PDU_TLV_OFFSET 74 +#define CFM_CCM_ITU_RESERVED_SIZE 16 + +struct br_cfm_common_hdr { + __u8 mdlevel_version; + __u8 opcode; + __u8 flags; + __u8 tlv_offset; +}; + +enum br_cfm_opcodes { + BR_CFM_OPCODE_CCM = 0x1, +}; + +/* MEP domain */ +enum br_cfm_domain { + BR_CFM_PORT, + BR_CFM_VLAN, +}; + +/* MEP direction */ +enum br_cfm_mep_direction { + BR_CFM_MEP_DIRECTION_DOWN, + BR_CFM_MEP_DIRECTION_UP, +}; + +/* CCM interval supported. */ +enum br_cfm_ccm_interval { + BR_CFM_CCM_INTERVAL_NONE, + BR_CFM_CCM_INTERVAL_3_3_MS, + BR_CFM_CCM_INTERVAL_10_MS, + BR_CFM_CCM_INTERVAL_100_MS, + BR_CFM_CCM_INTERVAL_1_SEC, + BR_CFM_CCM_INTERVAL_10_SEC, + BR_CFM_CCM_INTERVAL_1_MIN, + BR_CFM_CCM_INTERVAL_10_MIN, +}; + +#endif diff --git a/src/basic/linux/fib_rules.h b/src/basic/linux/fib_rules.h new file mode 100644 index 0000000..232df14 --- /dev/null +++ b/src/basic/linux/fib_rules.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_FIB_RULES_H +#define __LINUX_FIB_RULES_H + +#include <linux/types.h> +#include <linux/rtnetlink.h> + +/* rule is permanent, and cannot be deleted */ +#define FIB_RULE_PERMANENT 0x00000001 +#define FIB_RULE_INVERT 0x00000002 +#define FIB_RULE_UNRESOLVED 0x00000004 +#define FIB_RULE_IIF_DETACHED 0x00000008 +#define FIB_RULE_DEV_DETACHED FIB_RULE_IIF_DETACHED +#define FIB_RULE_OIF_DETACHED 0x00000010 + +/* try to find source address in routing lookups */ +#define FIB_RULE_FIND_SADDR 0x00010000 + +struct fib_rule_hdr { + __u8 family; + __u8 dst_len; + __u8 src_len; + __u8 tos; + + __u8 table; + __u8 res1; /* reserved */ + __u8 res2; /* reserved */ + __u8 action; + + __u32 flags; +}; + +struct fib_rule_uid_range { + __u32 start; + __u32 end; +}; + +struct fib_rule_port_range { + __u16 start; + __u16 end; +}; + +enum { + FRA_UNSPEC, + FRA_DST, /* destination address */ + FRA_SRC, /* source address */ + FRA_IIFNAME, /* interface name */ +#define FRA_IFNAME FRA_IIFNAME + FRA_GOTO, /* target to jump to (FR_ACT_GOTO) */ + FRA_UNUSED2, + FRA_PRIORITY, /* priority/preference */ + FRA_UNUSED3, + FRA_UNUSED4, + FRA_UNUSED5, + FRA_FWMARK, /* mark */ + FRA_FLOW, /* flow/class id */ + FRA_TUN_ID, + FRA_SUPPRESS_IFGROUP, + FRA_SUPPRESS_PREFIXLEN, + FRA_TABLE, /* Extended table id */ + FRA_FWMASK, /* mask for netfilter mark */ + FRA_OIFNAME, + FRA_PAD, + FRA_L3MDEV, /* iif or oif is l3mdev goto its table */ + FRA_UID_RANGE, /* UID range */ + FRA_PROTOCOL, /* Originator of the rule */ + FRA_IP_PROTO, /* ip proto */ + FRA_SPORT_RANGE, /* sport */ + FRA_DPORT_RANGE, /* dport */ + __FRA_MAX +}; + +#define FRA_MAX (__FRA_MAX - 1) + +enum { + FR_ACT_UNSPEC, + FR_ACT_TO_TBL, /* Pass to fixed table */ + FR_ACT_GOTO, /* Jump to another rule */ + FR_ACT_NOP, /* No operation */ + FR_ACT_RES3, + FR_ACT_RES4, + FR_ACT_BLACKHOLE, /* Drop without notification */ + FR_ACT_UNREACHABLE, /* Drop with ENETUNREACH */ + FR_ACT_PROHIBIT, /* Drop with EACCES */ + __FR_ACT_MAX, +}; + +#define FR_ACT_MAX (__FR_ACT_MAX - 1) + +#endif diff --git a/src/basic/linux/fou.h b/src/basic/linux/fou.h new file mode 100644 index 0000000..87c2c9f --- /dev/null +++ b/src/basic/linux/fou.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* fou.h - FOU Interface */ + +#ifndef _UAPI_LINUX_FOU_H +#define _UAPI_LINUX_FOU_H + +/* NETLINK_GENERIC related info + */ +#define FOU_GENL_NAME "fou" +#define FOU_GENL_VERSION 0x1 + +enum { + FOU_ATTR_UNSPEC, + FOU_ATTR_PORT, /* u16 */ + FOU_ATTR_AF, /* u8 */ + FOU_ATTR_IPPROTO, /* u8 */ + FOU_ATTR_TYPE, /* u8 */ + FOU_ATTR_REMCSUM_NOPARTIAL, /* flag */ + FOU_ATTR_LOCAL_V4, /* u32 */ + FOU_ATTR_LOCAL_V6, /* in6_addr */ + FOU_ATTR_PEER_V4, /* u32 */ + FOU_ATTR_PEER_V6, /* in6_addr */ + FOU_ATTR_PEER_PORT, /* u16 */ + FOU_ATTR_IFINDEX, /* s32 */ + + __FOU_ATTR_MAX, +}; + +#define FOU_ATTR_MAX (__FOU_ATTR_MAX - 1) + +enum { + FOU_CMD_UNSPEC, + FOU_CMD_ADD, + FOU_CMD_DEL, + FOU_CMD_GET, + + __FOU_CMD_MAX, +}; + +enum { + FOU_ENCAP_UNSPEC, + FOU_ENCAP_DIRECT, + FOU_ENCAP_GUE, +}; + +#define FOU_CMD_MAX (__FOU_CMD_MAX - 1) + +#endif /* _UAPI_LINUX_FOU_H */ diff --git a/src/basic/linux/genetlink.h b/src/basic/linux/genetlink.h new file mode 100644 index 0000000..ddba3ca --- /dev/null +++ b/src/basic/linux/genetlink.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_GENERIC_NETLINK_H +#define _UAPI__LINUX_GENERIC_NETLINK_H + +#include <linux/types.h> +#include <linux/netlink.h> + +#define GENL_NAMSIZ 16 /* length of family name */ + +#define GENL_MIN_ID NLMSG_MIN_TYPE +#define GENL_MAX_ID 1023 + +struct genlmsghdr { + __u8 cmd; + __u8 version; + __u16 reserved; +}; + +#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr)) + +#define GENL_ADMIN_PERM 0x01 +#define GENL_CMD_CAP_DO 0x02 +#define GENL_CMD_CAP_DUMP 0x04 +#define GENL_CMD_CAP_HASPOL 0x08 +#define GENL_UNS_ADMIN_PERM 0x10 + +/* + * List of reserved static generic netlink identifiers: + */ +#define GENL_ID_CTRL NLMSG_MIN_TYPE +#define GENL_ID_VFS_DQUOT (NLMSG_MIN_TYPE + 1) +#define GENL_ID_PMCRAID (NLMSG_MIN_TYPE + 2) +/* must be last reserved + 1 */ +#define GENL_START_ALLOC (NLMSG_MIN_TYPE + 3) + +/************************************************************************** + * Controller + **************************************************************************/ + +enum { + CTRL_CMD_UNSPEC, + CTRL_CMD_NEWFAMILY, + CTRL_CMD_DELFAMILY, + CTRL_CMD_GETFAMILY, + CTRL_CMD_NEWOPS, + CTRL_CMD_DELOPS, + CTRL_CMD_GETOPS, + CTRL_CMD_NEWMCAST_GRP, + CTRL_CMD_DELMCAST_GRP, + CTRL_CMD_GETMCAST_GRP, /* unused */ + CTRL_CMD_GETPOLICY, + __CTRL_CMD_MAX, +}; + +#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1) + +enum { + CTRL_ATTR_UNSPEC, + CTRL_ATTR_FAMILY_ID, + CTRL_ATTR_FAMILY_NAME, + CTRL_ATTR_VERSION, + CTRL_ATTR_HDRSIZE, + CTRL_ATTR_MAXATTR, + CTRL_ATTR_OPS, + CTRL_ATTR_MCAST_GROUPS, + CTRL_ATTR_POLICY, + CTRL_ATTR_OP_POLICY, + CTRL_ATTR_OP, + __CTRL_ATTR_MAX, +}; + +#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1) + +enum { + CTRL_ATTR_OP_UNSPEC, + CTRL_ATTR_OP_ID, + CTRL_ATTR_OP_FLAGS, + __CTRL_ATTR_OP_MAX, +}; + +#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1) + +enum { + CTRL_ATTR_MCAST_GRP_UNSPEC, + CTRL_ATTR_MCAST_GRP_NAME, + CTRL_ATTR_MCAST_GRP_ID, + __CTRL_ATTR_MCAST_GRP_MAX, +}; + +#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) + +enum { + CTRL_ATTR_POLICY_UNSPEC, + CTRL_ATTR_POLICY_DO, + CTRL_ATTR_POLICY_DUMP, + + __CTRL_ATTR_POLICY_DUMP_MAX, + CTRL_ATTR_POLICY_DUMP_MAX = __CTRL_ATTR_POLICY_DUMP_MAX - 1 +}; + +#define CTRL_ATTR_POLICY_MAX (__CTRL_ATTR_POLICY_DUMP_MAX - 1) + +#endif /* _UAPI__LINUX_GENERIC_NETLINK_H */ diff --git a/src/basic/linux/hdlc/ioctl.h b/src/basic/linux/hdlc/ioctl.h new file mode 100644 index 0000000..b06341a --- /dev/null +++ b/src/basic/linux/hdlc/ioctl.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __HDLC_IOCTL_H__ +#define __HDLC_IOCTL_H__ + + +#define GENERIC_HDLC_VERSION 4 /* For synchronization with sethdlc utility */ + +#define CLOCK_DEFAULT 0 /* Default setting */ +#define CLOCK_EXT 1 /* External TX and RX clock - DTE */ +#define CLOCK_INT 2 /* Internal TX and RX clock - DCE */ +#define CLOCK_TXINT 3 /* Internal TX and external RX clock */ +#define CLOCK_TXFROMRX 4 /* TX clock derived from external RX clock */ + + +#define ENCODING_DEFAULT 0 /* Default setting */ +#define ENCODING_NRZ 1 +#define ENCODING_NRZI 2 +#define ENCODING_FM_MARK 3 +#define ENCODING_FM_SPACE 4 +#define ENCODING_MANCHESTER 5 + + +#define PARITY_DEFAULT 0 /* Default setting */ +#define PARITY_NONE 1 /* No parity */ +#define PARITY_CRC16_PR0 2 /* CRC16, initial value 0x0000 */ +#define PARITY_CRC16_PR1 3 /* CRC16, initial value 0xFFFF */ +#define PARITY_CRC16_PR0_CCITT 4 /* CRC16, initial 0x0000, ITU-T version */ +#define PARITY_CRC16_PR1_CCITT 5 /* CRC16, initial 0xFFFF, ITU-T version */ +#define PARITY_CRC32_PR0_CCITT 6 /* CRC32, initial value 0x00000000 */ +#define PARITY_CRC32_PR1_CCITT 7 /* CRC32, initial value 0xFFFFFFFF */ + +#define LMI_DEFAULT 0 /* Default setting */ +#define LMI_NONE 1 /* No LMI, all PVCs are static */ +#define LMI_ANSI 2 /* ANSI Annex D */ +#define LMI_CCITT 3 /* ITU-T Annex A */ +#define LMI_CISCO 4 /* The "original" LMI, aka Gang of Four */ + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; +} sync_serial_settings; /* V.35, V.24, X.21 */ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; + unsigned int slot_map; +} te1_settings; /* T1, E1 */ + +typedef struct { + unsigned short encoding; + unsigned short parity; +} raw_hdlc_proto; + +typedef struct { + unsigned int t391; + unsigned int t392; + unsigned int n391; + unsigned int n392; + unsigned int n393; + unsigned short lmi; + unsigned short dce; /* 1 for DCE (network side) operation */ +} fr_proto; + +typedef struct { + unsigned int dlci; +} fr_proto_pvc; /* for creating/deleting FR PVCs */ + +typedef struct { + unsigned int dlci; + char master[IFNAMSIZ]; /* Name of master FRAD device */ +}fr_proto_pvc_info; /* for returning PVC information only */ + +typedef struct { + unsigned int interval; + unsigned int timeout; +} cisco_proto; + +typedef struct { + unsigned short dce; /* 1 for DCE (network side) operation */ + unsigned int modulo; /* modulo (8 = basic / 128 = extended) */ + unsigned int window; /* frame window size */ + unsigned int t1; /* timeout t1 */ + unsigned int t2; /* timeout t2 */ + unsigned int n2; /* frame retry counter */ +} x25_hdlc_proto; + +/* PPP doesn't need any info now - supply length = 0 to ioctl */ + +#endif /* __ASSEMBLY__ */ +#endif /* __HDLC_IOCTL_H__ */ diff --git a/src/basic/linux/if.h b/src/basic/linux/if.h new file mode 100644 index 0000000..e79f5c8 --- /dev/null +++ b/src/basic/linux/if.h @@ -0,0 +1,297 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the INET interface module. + * + * Version: @(#)if.h 1.0.2 04/18/93 + * + * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988 + * Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _LINUX_IF_H +#define _LINUX_IF_H + +#include <linux/libc-compat.h> /* for compatibility with glibc */ +#include <linux/types.h> /* for "__kernel_caddr_t" et al */ +#include <linux/socket.h> /* for "struct sockaddr" et al */ + +#ifndef __KERNEL__ +#include <sys/socket.h> /* for struct sockaddr. */ +#endif + +#if __UAPI_DEF_IF_IFNAMSIZ +#define IFNAMSIZ 16 +#endif /* __UAPI_DEF_IF_IFNAMSIZ */ +#define IFALIASZ 256 +#define ALTIFNAMSIZ 128 +#include <linux/hdlc/ioctl.h> + +/* For glibc compatibility. An empty enum does not compile. */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || \ + __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 +/** + * enum net_device_flags - &struct net_device flags + * + * These are the &struct net_device flags, they can be set by drivers, the + * kernel and some can be triggered by userspace. Userspace can query and + * set these flags using userspace utilities but there is also a sysfs + * entry available for all dev flags which can be queried and set. These flags + * are shared for all types of net_devices. The sysfs entries are available + * via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs + * are annotated below, note that only a few flags can be toggled and some + * other flags are always preserved from the original net_device flags + * even if you try to set them via sysfs. Flags which are always preserved + * are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile + * are annotated below as such. + * + * You should have a pretty good reason to be extending these flags. + * + * @IFF_UP: interface is up. Can be toggled through sysfs. + * @IFF_BROADCAST: broadcast address valid. Volatile. + * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs. + * @IFF_LOOPBACK: is a loopback net. Volatile. + * @IFF_POINTOPOINT: interface is has p-p link. Volatile. + * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs. + * Volatile. + * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile. + * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile. + * @IFF_PROMISC: receive all packets. Can be toggled through sysfs. + * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through + * sysfs. + * @IFF_MASTER: master of a load balancer. Volatile. + * @IFF_SLAVE: slave of a load balancer. Volatile. + * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs. + * @IFF_PORTSEL: can set media type. Can be toggled through sysfs. + * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs. + * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled + * through sysfs. + * @IFF_LOWER_UP: driver signals L1 up. Volatile. + * @IFF_DORMANT: driver signals dormant. Volatile. + * @IFF_ECHO: echo sent packets. Volatile. + */ +enum net_device_flags { +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS + IFF_UP = 1<<0, /* sysfs */ + IFF_BROADCAST = 1<<1, /* volatile */ + IFF_DEBUG = 1<<2, /* sysfs */ + IFF_LOOPBACK = 1<<3, /* volatile */ + IFF_POINTOPOINT = 1<<4, /* volatile */ + IFF_NOTRAILERS = 1<<5, /* sysfs */ + IFF_RUNNING = 1<<6, /* volatile */ + IFF_NOARP = 1<<7, /* sysfs */ + IFF_PROMISC = 1<<8, /* sysfs */ + IFF_ALLMULTI = 1<<9, /* sysfs */ + IFF_MASTER = 1<<10, /* volatile */ + IFF_SLAVE = 1<<11, /* volatile */ + IFF_MULTICAST = 1<<12, /* sysfs */ + IFF_PORTSEL = 1<<13, /* sysfs */ + IFF_AUTOMEDIA = 1<<14, /* sysfs */ + IFF_DYNAMIC = 1<<15, /* sysfs */ +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO + IFF_LOWER_UP = 1<<16, /* volatile */ + IFF_DORMANT = 1<<17, /* volatile */ + IFF_ECHO = 1<<18, /* volatile */ +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ +}; +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 */ + +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS +#define IFF_UP IFF_UP +#define IFF_BROADCAST IFF_BROADCAST +#define IFF_DEBUG IFF_DEBUG +#define IFF_LOOPBACK IFF_LOOPBACK +#define IFF_POINTOPOINT IFF_POINTOPOINT +#define IFF_NOTRAILERS IFF_NOTRAILERS +#define IFF_RUNNING IFF_RUNNING +#define IFF_NOARP IFF_NOARP +#define IFF_PROMISC IFF_PROMISC +#define IFF_ALLMULTI IFF_ALLMULTI +#define IFF_MASTER IFF_MASTER +#define IFF_SLAVE IFF_SLAVE +#define IFF_MULTICAST IFF_MULTICAST +#define IFF_PORTSEL IFF_PORTSEL +#define IFF_AUTOMEDIA IFF_AUTOMEDIA +#define IFF_DYNAMIC IFF_DYNAMIC +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */ + +#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO +#define IFF_LOWER_UP IFF_LOWER_UP +#define IFF_DORMANT IFF_DORMANT +#define IFF_ECHO IFF_ECHO +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ + +#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ + IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) + +#define IF_GET_IFACE 0x0001 /* for querying only */ +#define IF_GET_PROTO 0x0002 + +/* For definitions see hdlc.h */ +#define IF_IFACE_V35 0x1000 /* V.35 serial interface */ +#define IF_IFACE_V24 0x1001 /* V.24 serial interface */ +#define IF_IFACE_X21 0x1002 /* X.21 serial interface */ +#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */ +#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */ +#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */ +#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */ + +/* For definitions see hdlc.h */ +#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */ +#define IF_PROTO_PPP 0x2001 /* PPP protocol */ +#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */ +#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */ +#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */ +#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */ +#define IF_PROTO_X25 0x2006 /* X.25 */ +#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */ +#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */ +#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */ +#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */ +#define IF_PROTO_FR_ETH_PVC 0x200B +#define IF_PROTO_RAW 0x200C /* RAW Socket */ + +/* RFC 2863 operational status */ +enum { + IF_OPER_UNKNOWN, + IF_OPER_NOTPRESENT, + IF_OPER_DOWN, + IF_OPER_LOWERLAYERDOWN, + IF_OPER_TESTING, + IF_OPER_DORMANT, + IF_OPER_UP, +}; + +/* link modes */ +enum { + IF_LINK_MODE_DEFAULT, + IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */ + IF_LINK_MODE_TESTING, /* limit upward transition to testing */ +}; + +/* + * Device mapping structure. I'd just gone off and designed a + * beautiful scheme using only loadable modules with arguments + * for driver options and along come the PCMCIA people 8) + * + * Ah well. The get() side of this is good for WDSETUP, and it'll + * be handy for debugging things. The set side is fine for now and + * being very small might be worth keeping for clean configuration. + */ + +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_IFMAP +struct ifmap { + unsigned long mem_start; + unsigned long mem_end; + unsigned short base_addr; + unsigned char irq; + unsigned char dma; + unsigned char port; + /* 3 bytes spare */ +}; +#endif /* __UAPI_DEF_IF_IFMAP */ + +struct if_settings { + unsigned int type; /* Type of physical device or protocol */ + unsigned int size; /* Size of the data allocated by the caller */ + union { + /* {atm/eth/dsl}_settings anyone ? */ + raw_hdlc_proto *raw_hdlc; + cisco_proto *cisco; + fr_proto *fr; + fr_proto_pvc *fr_pvc; + fr_proto_pvc_info *fr_pvc_info; + x25_hdlc_proto *x25; + + /* interface settings */ + sync_serial_settings *sync; + te1_settings *te1; + } ifs_ifsu; +}; + +/* + * Interface request structure used for socket + * ioctl's. All interface ioctl's must have parameter + * definitions which begin with ifr_name. The + * remainder may be interface specific. + */ + +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_IFREQ +struct ifreq { +#define IFHWADDRLEN 6 + union + { + char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */ + } ifr_ifrn; + + union { + struct sockaddr ifru_addr; + struct sockaddr ifru_dstaddr; + struct sockaddr ifru_broadaddr; + struct sockaddr ifru_netmask; + struct sockaddr ifru_hwaddr; + short ifru_flags; + int ifru_ivalue; + int ifru_mtu; + struct ifmap ifru_map; + char ifru_slave[IFNAMSIZ]; /* Just fits the size */ + char ifru_newname[IFNAMSIZ]; + void * ifru_data; + struct if_settings ifru_settings; + } ifr_ifru; +}; +#endif /* __UAPI_DEF_IF_IFREQ */ + +#define ifr_name ifr_ifrn.ifrn_name /* interface name */ +#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */ +#define ifr_addr ifr_ifru.ifru_addr /* address */ +#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */ +#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */ +#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */ +#define ifr_flags ifr_ifru.ifru_flags /* flags */ +#define ifr_metric ifr_ifru.ifru_ivalue /* metric */ +#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */ +#define ifr_map ifr_ifru.ifru_map /* device map */ +#define ifr_slave ifr_ifru.ifru_slave /* slave device */ +#define ifr_data ifr_ifru.ifru_data /* for use by interface */ +#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */ +#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */ +#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */ +#define ifr_newname ifr_ifru.ifru_newname /* New name */ +#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/ + +/* + * Structure used in SIOCGIFCONF request. + * Used to retrieve interface configuration + * for machine (useful for programs which + * must know all networks accessible). + */ + +/* for compatibility with glibc net/if.h */ +#if __UAPI_DEF_IF_IFCONF +struct ifconf { + int ifc_len; /* size of buffer */ + union { + char *ifcu_buf; + struct ifreq *ifcu_req; + } ifc_ifcu; +}; +#endif /* __UAPI_DEF_IF_IFCONF */ + +#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */ +#define ifc_req ifc_ifcu.ifcu_req /* array of structures */ + +#endif /* _LINUX_IF_H */ diff --git a/src/basic/linux/if_addr.h b/src/basic/linux/if_addr.h new file mode 100644 index 0000000..1c392dd --- /dev/null +++ b/src/basic/linux/if_addr.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_IF_ADDR_H +#define __LINUX_IF_ADDR_H + +#include <linux/types.h> +#include <linux/netlink.h> + +struct ifaddrmsg { + __u8 ifa_family; + __u8 ifa_prefixlen; /* The prefix length */ + __u8 ifa_flags; /* Flags */ + __u8 ifa_scope; /* Address scope */ + __u32 ifa_index; /* Link index */ +}; + +/* + * Important comment: + * IFA_ADDRESS is prefix address, rather than local interface address. + * It makes no difference for normally configured broadcast interfaces, + * but for point-to-point IFA_ADDRESS is DESTINATION address, + * local address is supplied in IFA_LOCAL attribute. + * + * IFA_FLAGS is a u32 attribute that extends the u8 field ifa_flags. + * If present, the value from struct ifaddrmsg will be ignored. + */ +enum { + IFA_UNSPEC, + IFA_ADDRESS, + IFA_LOCAL, + IFA_LABEL, + IFA_BROADCAST, + IFA_ANYCAST, + IFA_CACHEINFO, + IFA_MULTICAST, + IFA_FLAGS, + IFA_RT_PRIORITY, /* u32, priority/metric for prefix route */ + IFA_TARGET_NETNSID, + IFA_PROTO, /* u8, address protocol */ + __IFA_MAX, +}; + +#define IFA_MAX (__IFA_MAX - 1) + +/* ifa_flags */ +#define IFA_F_SECONDARY 0x01 +#define IFA_F_TEMPORARY IFA_F_SECONDARY + +#define IFA_F_NODAD 0x02 +#define IFA_F_OPTIMISTIC 0x04 +#define IFA_F_DADFAILED 0x08 +#define IFA_F_HOMEADDRESS 0x10 +#define IFA_F_DEPRECATED 0x20 +#define IFA_F_TENTATIVE 0x40 +#define IFA_F_PERMANENT 0x80 +#define IFA_F_MANAGETEMPADDR 0x100 +#define IFA_F_NOPREFIXROUTE 0x200 +#define IFA_F_MCAUTOJOIN 0x400 +#define IFA_F_STABLE_PRIVACY 0x800 + +struct ifa_cacheinfo { + __u32 ifa_prefered; + __u32 ifa_valid; + __u32 cstamp; /* created timestamp, hundredths of seconds */ + __u32 tstamp; /* updated timestamp, hundredths of seconds */ +}; + +/* backwards compatibility for userspace */ +#ifndef __KERNEL__ +#define IFA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg)))) +#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg)) +#endif + +/* ifa_proto */ +#define IFAPROT_UNSPEC 0 +#define IFAPROT_KERNEL_LO 1 /* loopback */ +#define IFAPROT_KERNEL_RA 2 /* set by kernel from router announcement */ +#define IFAPROT_KERNEL_LL 3 /* link-local set by kernel */ + +#endif diff --git a/src/basic/linux/if_bonding.h b/src/basic/linux/if_bonding.h new file mode 100644 index 0000000..d174914 --- /dev/null +++ b/src/basic/linux/if_bonding.h @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ +/* + * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'. + * + * + * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes + * NCM: Network and Communications Management, Inc. + * + * BUT, I'm the one who modified it for ethernet, so: + * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov + * + * This software may be used and distributed according to the terms + * of the GNU Public License, incorporated herein by reference. + * + * 2003/03/18 - Amir Noam <amir.noam at intel dot com> + * - Added support for getting slave's speed and duplex via ethtool. + * Needed for 802.3ad and other future modes. + * + * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and + * Shmulik Hen <shmulik.hen at intel dot com> + * - Enable support of modes that need to use the unique mac address of + * each slave. + * + * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and + * Amir Noam <amir.noam at intel dot com> + * - Moved driver's private data types to bonding.h + * + * 2003/03/18 - Amir Noam <amir.noam at intel dot com>, + * Tsippy Mendelson <tsippy.mendelson at intel dot com> and + * Shmulik Hen <shmulik.hen at intel dot com> + * - Added support for IEEE 802.3ad Dynamic link aggregation mode. + * + * 2003/05/01 - Amir Noam <amir.noam at intel dot com> + * - Added ABI version control to restore compatibility between + * new/old ifenslave and new/old bonding. + * + * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> + * - Code cleanup and style changes + * + * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov> + * - added definitions for various XOR hashing policies + */ + +#ifndef _LINUX_IF_BONDING_H +#define _LINUX_IF_BONDING_H + +#include <linux/if.h> +#include <linux/types.h> +#include <linux/if_ether.h> + +/* userland - kernel ABI version (2003/05/08) */ +#define BOND_ABI_VERSION 2 + +/* + * We can remove these ioctl definitions in 2.5. People should use the + * SIOC*** versions of them instead + */ +#define BOND_ENSLAVE_OLD (SIOCDEVPRIVATE) +#define BOND_RELEASE_OLD (SIOCDEVPRIVATE + 1) +#define BOND_SETHWADDR_OLD (SIOCDEVPRIVATE + 2) +#define BOND_SLAVE_INFO_QUERY_OLD (SIOCDEVPRIVATE + 11) +#define BOND_INFO_QUERY_OLD (SIOCDEVPRIVATE + 12) +#define BOND_CHANGE_ACTIVE_OLD (SIOCDEVPRIVATE + 13) + +#define BOND_CHECK_MII_STATUS (SIOCGMIIPHY) + +#define BOND_MODE_ROUNDROBIN 0 +#define BOND_MODE_ACTIVEBACKUP 1 +#define BOND_MODE_XOR 2 +#define BOND_MODE_BROADCAST 3 +#define BOND_MODE_8023AD 4 +#define BOND_MODE_TLB 5 +#define BOND_MODE_ALB 6 /* TLB + RLB (receive load balancing) */ + +/* each slave's link has 4 states */ +#define BOND_LINK_UP 0 /* link is up and running */ +#define BOND_LINK_FAIL 1 /* link has just gone down */ +#define BOND_LINK_DOWN 2 /* link has been down for too long time */ +#define BOND_LINK_BACK 3 /* link is going back */ + +/* each slave has several states */ +#define BOND_STATE_ACTIVE 0 /* link is active */ +#define BOND_STATE_BACKUP 1 /* link is backup */ + +#define BOND_DEFAULT_MAX_BONDS 1 /* Default maximum number of devices to support */ + +#define BOND_DEFAULT_TX_QUEUES 16 /* Default number of tx queues per device */ + +#define BOND_DEFAULT_RESEND_IGMP 1 /* Default number of IGMP membership reports */ + +/* hashing types */ +#define BOND_XMIT_POLICY_LAYER2 0 /* layer 2 (MAC only), default */ +#define BOND_XMIT_POLICY_LAYER34 1 /* layer 3+4 (IP ^ (TCP || UDP)) */ +#define BOND_XMIT_POLICY_LAYER23 2 /* layer 2+3 (IP ^ MAC) */ +#define BOND_XMIT_POLICY_ENCAP23 3 /* encapsulated layer 2+3 */ +#define BOND_XMIT_POLICY_ENCAP34 4 /* encapsulated layer 3+4 */ +#define BOND_XMIT_POLICY_VLAN_SRCMAC 5 /* vlan + source MAC */ + +/* 802.3ad port state definitions (43.4.2.2 in the 802.3ad standard) */ +#define LACP_STATE_LACP_ACTIVITY 0x1 +#define LACP_STATE_LACP_TIMEOUT 0x2 +#define LACP_STATE_AGGREGATION 0x4 +#define LACP_STATE_SYNCHRONIZATION 0x8 +#define LACP_STATE_COLLECTING 0x10 +#define LACP_STATE_DISTRIBUTING 0x20 +#define LACP_STATE_DEFAULTED 0x40 +#define LACP_STATE_EXPIRED 0x80 + +typedef struct ifbond { + __s32 bond_mode; + __s32 num_slaves; + __s32 miimon; +} ifbond; + +typedef struct ifslave { + __s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */ + char slave_name[IFNAMSIZ]; + __s8 link; + __s8 state; + __u32 link_failure_count; +} ifslave; + +struct ad_info { + __u16 aggregator_id; + __u16 ports; + __u16 actor_key; + __u16 partner_key; + __u8 partner_system[ETH_ALEN]; +}; + +/* Embedded inside LINK_XSTATS_TYPE_BOND */ +enum { + BOND_XSTATS_UNSPEC, + BOND_XSTATS_3AD, + __BOND_XSTATS_MAX +}; +#define BOND_XSTATS_MAX (__BOND_XSTATS_MAX - 1) + +/* Embedded inside BOND_XSTATS_3AD */ +enum { + BOND_3AD_STAT_LACPDU_RX, + BOND_3AD_STAT_LACPDU_TX, + BOND_3AD_STAT_LACPDU_UNKNOWN_RX, + BOND_3AD_STAT_LACPDU_ILLEGAL_RX, + BOND_3AD_STAT_MARKER_RX, + BOND_3AD_STAT_MARKER_TX, + BOND_3AD_STAT_MARKER_RESP_RX, + BOND_3AD_STAT_MARKER_RESP_TX, + BOND_3AD_STAT_MARKER_UNKNOWN_RX, + BOND_3AD_STAT_PAD, + __BOND_3AD_STAT_MAX +}; +#define BOND_3AD_STAT_MAX (__BOND_3AD_STAT_MAX - 1) + +#endif /* _LINUX_IF_BONDING_H */ diff --git a/src/basic/linux/if_bridge.h b/src/basic/linux/if_bridge.h new file mode 100644 index 0000000..d9de241 --- /dev/null +++ b/src/basic/linux/if_bridge.h @@ -0,0 +1,826 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Linux ethernet bridge + * + * Authors: + * Lennert Buytenhek <buytenh@gnu.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IF_BRIDGE_H +#define _UAPI_LINUX_IF_BRIDGE_H + +#include <linux/types.h> +#include <linux/if_ether.h> +#include <linux/in6.h> + +#define SYSFS_BRIDGE_ATTR "bridge" +#define SYSFS_BRIDGE_FDB "brforward" +#define SYSFS_BRIDGE_PORT_SUBDIR "brif" +#define SYSFS_BRIDGE_PORT_ATTR "brport" +#define SYSFS_BRIDGE_PORT_LINK "bridge" + +#define BRCTL_VERSION 1 + +#define BRCTL_GET_VERSION 0 +#define BRCTL_GET_BRIDGES 1 +#define BRCTL_ADD_BRIDGE 2 +#define BRCTL_DEL_BRIDGE 3 +#define BRCTL_ADD_IF 4 +#define BRCTL_DEL_IF 5 +#define BRCTL_GET_BRIDGE_INFO 6 +#define BRCTL_GET_PORT_LIST 7 +#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8 +#define BRCTL_SET_BRIDGE_HELLO_TIME 9 +#define BRCTL_SET_BRIDGE_MAX_AGE 10 +#define BRCTL_SET_AGEING_TIME 11 +#define BRCTL_SET_GC_INTERVAL 12 +#define BRCTL_GET_PORT_INFO 13 +#define BRCTL_SET_BRIDGE_STP_STATE 14 +#define BRCTL_SET_BRIDGE_PRIORITY 15 +#define BRCTL_SET_PORT_PRIORITY 16 +#define BRCTL_SET_PATH_COST 17 +#define BRCTL_GET_FDB_ENTRIES 18 + +#define BR_STATE_DISABLED 0 +#define BR_STATE_LISTENING 1 +#define BR_STATE_LEARNING 2 +#define BR_STATE_FORWARDING 3 +#define BR_STATE_BLOCKING 4 + +struct __bridge_info { + __u64 designated_root; + __u64 bridge_id; + __u32 root_path_cost; + __u32 max_age; + __u32 hello_time; + __u32 forward_delay; + __u32 bridge_max_age; + __u32 bridge_hello_time; + __u32 bridge_forward_delay; + __u8 topology_change; + __u8 topology_change_detected; + __u8 root_port; + __u8 stp_enabled; + __u32 ageing_time; + __u32 gc_interval; + __u32 hello_timer_value; + __u32 tcn_timer_value; + __u32 topology_change_timer_value; + __u32 gc_timer_value; +}; + +struct __port_info { + __u64 designated_root; + __u64 designated_bridge; + __u16 port_id; + __u16 designated_port; + __u32 path_cost; + __u32 designated_cost; + __u8 state; + __u8 top_change_ack; + __u8 config_pending; + __u8 unused0; + __u32 message_age_timer_value; + __u32 forward_delay_timer_value; + __u32 hold_timer_value; +}; + +struct __fdb_entry { + __u8 mac_addr[ETH_ALEN]; + __u8 port_no; + __u8 is_local; + __u32 ageing_timer_value; + __u8 port_hi; + __u8 pad0; + __u16 unused; +}; + +/* Bridge Flags */ +#define BRIDGE_FLAGS_MASTER 1 /* Bridge command to/from master */ +#define BRIDGE_FLAGS_SELF 2 /* Bridge command to/from lowerdev */ + +#define BRIDGE_MODE_VEB 0 /* Default loopback mode */ +#define BRIDGE_MODE_VEPA 1 /* 802.1Qbg defined VEPA mode */ +#define BRIDGE_MODE_UNDEF 0xFFFF /* mode undefined */ + +/* Bridge management nested attributes + * [IFLA_AF_SPEC] = { + * [IFLA_BRIDGE_FLAGS] + * [IFLA_BRIDGE_MODE] + * [IFLA_BRIDGE_VLAN_INFO] + * } + */ +enum { + IFLA_BRIDGE_FLAGS, + IFLA_BRIDGE_MODE, + IFLA_BRIDGE_VLAN_INFO, + IFLA_BRIDGE_VLAN_TUNNEL_INFO, + IFLA_BRIDGE_MRP, + IFLA_BRIDGE_CFM, + IFLA_BRIDGE_MST, + __IFLA_BRIDGE_MAX, +}; +#define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) + +#define BRIDGE_VLAN_INFO_MASTER (1<<0) /* Operate on Bridge device as well */ +#define BRIDGE_VLAN_INFO_PVID (1<<1) /* VLAN is PVID, ingress untagged */ +#define BRIDGE_VLAN_INFO_UNTAGGED (1<<2) /* VLAN egresses untagged */ +#define BRIDGE_VLAN_INFO_RANGE_BEGIN (1<<3) /* VLAN is start of vlan range */ +#define BRIDGE_VLAN_INFO_RANGE_END (1<<4) /* VLAN is end of vlan range */ +#define BRIDGE_VLAN_INFO_BRENTRY (1<<5) /* Global bridge VLAN entry */ +#define BRIDGE_VLAN_INFO_ONLY_OPTS (1<<6) /* Skip create/delete/flags */ + +struct bridge_vlan_info { + __u16 flags; + __u16 vid; +}; + +enum { + IFLA_BRIDGE_VLAN_TUNNEL_UNSPEC, + IFLA_BRIDGE_VLAN_TUNNEL_ID, + IFLA_BRIDGE_VLAN_TUNNEL_VID, + IFLA_BRIDGE_VLAN_TUNNEL_FLAGS, + __IFLA_BRIDGE_VLAN_TUNNEL_MAX, +}; + +#define IFLA_BRIDGE_VLAN_TUNNEL_MAX (__IFLA_BRIDGE_VLAN_TUNNEL_MAX - 1) + +struct bridge_vlan_xstats { + __u64 rx_bytes; + __u64 rx_packets; + __u64 tx_bytes; + __u64 tx_packets; + __u16 vid; + __u16 flags; + __u32 pad2; +}; + +enum { + IFLA_BRIDGE_MRP_UNSPEC, + IFLA_BRIDGE_MRP_INSTANCE, + IFLA_BRIDGE_MRP_PORT_STATE, + IFLA_BRIDGE_MRP_PORT_ROLE, + IFLA_BRIDGE_MRP_RING_STATE, + IFLA_BRIDGE_MRP_RING_ROLE, + IFLA_BRIDGE_MRP_START_TEST, + IFLA_BRIDGE_MRP_INFO, + IFLA_BRIDGE_MRP_IN_ROLE, + IFLA_BRIDGE_MRP_IN_STATE, + IFLA_BRIDGE_MRP_START_IN_TEST, + __IFLA_BRIDGE_MRP_MAX, +}; + +#define IFLA_BRIDGE_MRP_MAX (__IFLA_BRIDGE_MRP_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_INSTANCE_UNSPEC, + IFLA_BRIDGE_MRP_INSTANCE_RING_ID, + IFLA_BRIDGE_MRP_INSTANCE_P_IFINDEX, + IFLA_BRIDGE_MRP_INSTANCE_S_IFINDEX, + IFLA_BRIDGE_MRP_INSTANCE_PRIO, + __IFLA_BRIDGE_MRP_INSTANCE_MAX, +}; + +#define IFLA_BRIDGE_MRP_INSTANCE_MAX (__IFLA_BRIDGE_MRP_INSTANCE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_PORT_STATE_UNSPEC, + IFLA_BRIDGE_MRP_PORT_STATE_STATE, + __IFLA_BRIDGE_MRP_PORT_STATE_MAX, +}; + +#define IFLA_BRIDGE_MRP_PORT_STATE_MAX (__IFLA_BRIDGE_MRP_PORT_STATE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_PORT_ROLE_UNSPEC, + IFLA_BRIDGE_MRP_PORT_ROLE_ROLE, + __IFLA_BRIDGE_MRP_PORT_ROLE_MAX, +}; + +#define IFLA_BRIDGE_MRP_PORT_ROLE_MAX (__IFLA_BRIDGE_MRP_PORT_ROLE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_RING_STATE_UNSPEC, + IFLA_BRIDGE_MRP_RING_STATE_RING_ID, + IFLA_BRIDGE_MRP_RING_STATE_STATE, + __IFLA_BRIDGE_MRP_RING_STATE_MAX, +}; + +#define IFLA_BRIDGE_MRP_RING_STATE_MAX (__IFLA_BRIDGE_MRP_RING_STATE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_RING_ROLE_UNSPEC, + IFLA_BRIDGE_MRP_RING_ROLE_RING_ID, + IFLA_BRIDGE_MRP_RING_ROLE_ROLE, + __IFLA_BRIDGE_MRP_RING_ROLE_MAX, +}; + +#define IFLA_BRIDGE_MRP_RING_ROLE_MAX (__IFLA_BRIDGE_MRP_RING_ROLE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_START_TEST_UNSPEC, + IFLA_BRIDGE_MRP_START_TEST_RING_ID, + IFLA_BRIDGE_MRP_START_TEST_INTERVAL, + IFLA_BRIDGE_MRP_START_TEST_MAX_MISS, + IFLA_BRIDGE_MRP_START_TEST_PERIOD, + IFLA_BRIDGE_MRP_START_TEST_MONITOR, + __IFLA_BRIDGE_MRP_START_TEST_MAX, +}; + +#define IFLA_BRIDGE_MRP_START_TEST_MAX (__IFLA_BRIDGE_MRP_START_TEST_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_INFO_UNSPEC, + IFLA_BRIDGE_MRP_INFO_RING_ID, + IFLA_BRIDGE_MRP_INFO_P_IFINDEX, + IFLA_BRIDGE_MRP_INFO_S_IFINDEX, + IFLA_BRIDGE_MRP_INFO_PRIO, + IFLA_BRIDGE_MRP_INFO_RING_STATE, + IFLA_BRIDGE_MRP_INFO_RING_ROLE, + IFLA_BRIDGE_MRP_INFO_TEST_INTERVAL, + IFLA_BRIDGE_MRP_INFO_TEST_MAX_MISS, + IFLA_BRIDGE_MRP_INFO_TEST_MONITOR, + IFLA_BRIDGE_MRP_INFO_I_IFINDEX, + IFLA_BRIDGE_MRP_INFO_IN_STATE, + IFLA_BRIDGE_MRP_INFO_IN_ROLE, + IFLA_BRIDGE_MRP_INFO_IN_TEST_INTERVAL, + IFLA_BRIDGE_MRP_INFO_IN_TEST_MAX_MISS, + __IFLA_BRIDGE_MRP_INFO_MAX, +}; + +#define IFLA_BRIDGE_MRP_INFO_MAX (__IFLA_BRIDGE_MRP_INFO_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_IN_STATE_UNSPEC, + IFLA_BRIDGE_MRP_IN_STATE_IN_ID, + IFLA_BRIDGE_MRP_IN_STATE_STATE, + __IFLA_BRIDGE_MRP_IN_STATE_MAX, +}; + +#define IFLA_BRIDGE_MRP_IN_STATE_MAX (__IFLA_BRIDGE_MRP_IN_STATE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_IN_ROLE_UNSPEC, + IFLA_BRIDGE_MRP_IN_ROLE_RING_ID, + IFLA_BRIDGE_MRP_IN_ROLE_IN_ID, + IFLA_BRIDGE_MRP_IN_ROLE_ROLE, + IFLA_BRIDGE_MRP_IN_ROLE_I_IFINDEX, + __IFLA_BRIDGE_MRP_IN_ROLE_MAX, +}; + +#define IFLA_BRIDGE_MRP_IN_ROLE_MAX (__IFLA_BRIDGE_MRP_IN_ROLE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_START_IN_TEST_UNSPEC, + IFLA_BRIDGE_MRP_START_IN_TEST_IN_ID, + IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, + IFLA_BRIDGE_MRP_START_IN_TEST_MAX_MISS, + IFLA_BRIDGE_MRP_START_IN_TEST_PERIOD, + __IFLA_BRIDGE_MRP_START_IN_TEST_MAX, +}; + +#define IFLA_BRIDGE_MRP_START_IN_TEST_MAX (__IFLA_BRIDGE_MRP_START_IN_TEST_MAX - 1) + +struct br_mrp_instance { + __u32 ring_id; + __u32 p_ifindex; + __u32 s_ifindex; + __u16 prio; +}; + +struct br_mrp_ring_state { + __u32 ring_id; + __u32 ring_state; +}; + +struct br_mrp_ring_role { + __u32 ring_id; + __u32 ring_role; +}; + +struct br_mrp_start_test { + __u32 ring_id; + __u32 interval; + __u32 max_miss; + __u32 period; + __u32 monitor; +}; + +struct br_mrp_in_state { + __u32 in_state; + __u16 in_id; +}; + +struct br_mrp_in_role { + __u32 ring_id; + __u32 in_role; + __u32 i_ifindex; + __u16 in_id; +}; + +struct br_mrp_start_in_test { + __u32 interval; + __u32 max_miss; + __u32 period; + __u16 in_id; +}; + +enum { + IFLA_BRIDGE_CFM_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CREATE, + IFLA_BRIDGE_CFM_MEP_DELETE, + IFLA_BRIDGE_CFM_MEP_CONFIG, + IFLA_BRIDGE_CFM_CC_CONFIG, + IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD, + IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE, + IFLA_BRIDGE_CFM_CC_RDI, + IFLA_BRIDGE_CFM_CC_CCM_TX, + IFLA_BRIDGE_CFM_MEP_CREATE_INFO, + IFLA_BRIDGE_CFM_MEP_CONFIG_INFO, + IFLA_BRIDGE_CFM_CC_CONFIG_INFO, + IFLA_BRIDGE_CFM_CC_RDI_INFO, + IFLA_BRIDGE_CFM_CC_CCM_TX_INFO, + IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO, + IFLA_BRIDGE_CFM_MEP_STATUS_INFO, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO, + __IFLA_BRIDGE_CFM_MAX, +}; + +#define IFLA_BRIDGE_CFM_MAX (__IFLA_BRIDGE_CFM_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_CREATE_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE, + IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN, + IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION, + IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX, + __IFLA_BRIDGE_CFM_MEP_CREATE_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_CREATE_MAX (__IFLA_BRIDGE_CFM_MEP_CREATE_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_DELETE_UNSPEC, + IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE, + __IFLA_BRIDGE_CFM_MEP_DELETE_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_DELETE_MAX (__IFLA_BRIDGE_CFM_MEP_DELETE_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_CONFIG_UNSPEC, + IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE, + IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC, + IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL, + IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID, + __IFLA_BRIDGE_CFM_MEP_CONFIG_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_CONFIG_MAX (__IFLA_BRIDGE_CFM_MEP_CONFIG_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_CONFIG_UNSPEC, + IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE, + IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE, + IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL, + IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID, + __IFLA_BRIDGE_CFM_CC_CONFIG_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_CONFIG_MAX (__IFLA_BRIDGE_CFM_CC_CONFIG_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_PEER_MEP_UNSPEC, + IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE, + IFLA_BRIDGE_CFM_CC_PEER_MEPID, + __IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX (__IFLA_BRIDGE_CFM_CC_PEER_MEP_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_RDI_UNSPEC, + IFLA_BRIDGE_CFM_CC_RDI_INSTANCE, + IFLA_BRIDGE_CFM_CC_RDI_RDI, + __IFLA_BRIDGE_CFM_CC_RDI_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_RDI_MAX (__IFLA_BRIDGE_CFM_CC_RDI_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_CCM_TX_UNSPEC, + IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE, + IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC, + IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE, + IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD, + IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV, + IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV, + IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE, + __IFLA_BRIDGE_CFM_CC_CCM_TX_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_CCM_TX_MAX (__IFLA_BRIDGE_CFM_CC_CCM_TX_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_MEP_STATUS_UNSPEC, + IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE, + IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN, + IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN, + IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN, + __IFLA_BRIDGE_CFM_MEP_STATUS_MAX, +}; + +#define IFLA_BRIDGE_CFM_MEP_STATUS_MAX (__IFLA_BRIDGE_CFM_MEP_STATUS_MAX - 1) + +enum { + IFLA_BRIDGE_CFM_CC_PEER_STATUS_UNSPEC, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN, + IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN, + __IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX, +}; + +#define IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX (__IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX - 1) + +enum { + IFLA_BRIDGE_MST_UNSPEC, + IFLA_BRIDGE_MST_ENTRY, + __IFLA_BRIDGE_MST_MAX, +}; +#define IFLA_BRIDGE_MST_MAX (__IFLA_BRIDGE_MST_MAX - 1) + +enum { + IFLA_BRIDGE_MST_ENTRY_UNSPEC, + IFLA_BRIDGE_MST_ENTRY_MSTI, + IFLA_BRIDGE_MST_ENTRY_STATE, + __IFLA_BRIDGE_MST_ENTRY_MAX, +}; +#define IFLA_BRIDGE_MST_ENTRY_MAX (__IFLA_BRIDGE_MST_ENTRY_MAX - 1) + +struct bridge_stp_xstats { + __u64 transition_blk; + __u64 transition_fwd; + __u64 rx_bpdu; + __u64 tx_bpdu; + __u64 rx_tcn; + __u64 tx_tcn; +}; + +/* Bridge vlan RTM header */ +struct br_vlan_msg { + __u8 family; + __u8 reserved1; + __u16 reserved2; + __u32 ifindex; +}; + +enum { + BRIDGE_VLANDB_DUMP_UNSPEC, + BRIDGE_VLANDB_DUMP_FLAGS, + __BRIDGE_VLANDB_DUMP_MAX, +}; +#define BRIDGE_VLANDB_DUMP_MAX (__BRIDGE_VLANDB_DUMP_MAX - 1) + +/* flags used in BRIDGE_VLANDB_DUMP_FLAGS attribute to affect dumps */ +#define BRIDGE_VLANDB_DUMPF_STATS (1 << 0) /* Include stats in the dump */ +#define BRIDGE_VLANDB_DUMPF_GLOBAL (1 << 1) /* Dump global vlan options only */ + +/* Bridge vlan RTM attributes + * [BRIDGE_VLANDB_ENTRY] = { + * [BRIDGE_VLANDB_ENTRY_INFO] + * ... + * } + * [BRIDGE_VLANDB_GLOBAL_OPTIONS] = { + * [BRIDGE_VLANDB_GOPTS_ID] + * ... + * } + */ +enum { + BRIDGE_VLANDB_UNSPEC, + BRIDGE_VLANDB_ENTRY, + BRIDGE_VLANDB_GLOBAL_OPTIONS, + __BRIDGE_VLANDB_MAX, +}; +#define BRIDGE_VLANDB_MAX (__BRIDGE_VLANDB_MAX - 1) + +enum { + BRIDGE_VLANDB_ENTRY_UNSPEC, + BRIDGE_VLANDB_ENTRY_INFO, + BRIDGE_VLANDB_ENTRY_RANGE, + BRIDGE_VLANDB_ENTRY_STATE, + BRIDGE_VLANDB_ENTRY_TUNNEL_INFO, + BRIDGE_VLANDB_ENTRY_STATS, + BRIDGE_VLANDB_ENTRY_MCAST_ROUTER, + __BRIDGE_VLANDB_ENTRY_MAX, +}; +#define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1) + +/* [BRIDGE_VLANDB_ENTRY] = { + * [BRIDGE_VLANDB_ENTRY_TUNNEL_INFO] = { + * [BRIDGE_VLANDB_TINFO_ID] + * ... + * } + * } + */ +enum { + BRIDGE_VLANDB_TINFO_UNSPEC, + BRIDGE_VLANDB_TINFO_ID, + BRIDGE_VLANDB_TINFO_CMD, + __BRIDGE_VLANDB_TINFO_MAX, +}; +#define BRIDGE_VLANDB_TINFO_MAX (__BRIDGE_VLANDB_TINFO_MAX - 1) + +/* [BRIDGE_VLANDB_ENTRY] = { + * [BRIDGE_VLANDB_ENTRY_STATS] = { + * [BRIDGE_VLANDB_STATS_RX_BYTES] + * ... + * } + * ... + * } + */ +enum { + BRIDGE_VLANDB_STATS_UNSPEC, + BRIDGE_VLANDB_STATS_RX_BYTES, + BRIDGE_VLANDB_STATS_RX_PACKETS, + BRIDGE_VLANDB_STATS_TX_BYTES, + BRIDGE_VLANDB_STATS_TX_PACKETS, + BRIDGE_VLANDB_STATS_PAD, + __BRIDGE_VLANDB_STATS_MAX, +}; +#define BRIDGE_VLANDB_STATS_MAX (__BRIDGE_VLANDB_STATS_MAX - 1) + +enum { + BRIDGE_VLANDB_GOPTS_UNSPEC, + BRIDGE_VLANDB_GOPTS_ID, + BRIDGE_VLANDB_GOPTS_RANGE, + BRIDGE_VLANDB_GOPTS_MCAST_SNOOPING, + BRIDGE_VLANDB_GOPTS_MCAST_IGMP_VERSION, + BRIDGE_VLANDB_GOPTS_MCAST_MLD_VERSION, + BRIDGE_VLANDB_GOPTS_MCAST_LAST_MEMBER_CNT, + BRIDGE_VLANDB_GOPTS_MCAST_STARTUP_QUERY_CNT, + BRIDGE_VLANDB_GOPTS_MCAST_LAST_MEMBER_INTVL, + BRIDGE_VLANDB_GOPTS_PAD, + BRIDGE_VLANDB_GOPTS_MCAST_MEMBERSHIP_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERY_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERY_RESPONSE_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_STARTUP_QUERY_INTVL, + BRIDGE_VLANDB_GOPTS_MCAST_QUERIER, + BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS, + BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE, + BRIDGE_VLANDB_GOPTS_MSTI, + __BRIDGE_VLANDB_GOPTS_MAX +}; +#define BRIDGE_VLANDB_GOPTS_MAX (__BRIDGE_VLANDB_GOPTS_MAX - 1) + +/* Bridge multicast database attributes + * [MDBA_MDB] = { + * [MDBA_MDB_ENTRY] = { + * [MDBA_MDB_ENTRY_INFO] { + * struct br_mdb_entry + * [MDBA_MDB_EATTR attributes] + * } + * } + * } + * [MDBA_ROUTER] = { + * [MDBA_ROUTER_PORT] = { + * u32 ifindex + * [MDBA_ROUTER_PATTR attributes] + * } + * } + */ +enum { + MDBA_UNSPEC, + MDBA_MDB, + MDBA_ROUTER, + __MDBA_MAX, +}; +#define MDBA_MAX (__MDBA_MAX - 1) + +enum { + MDBA_MDB_UNSPEC, + MDBA_MDB_ENTRY, + __MDBA_MDB_MAX, +}; +#define MDBA_MDB_MAX (__MDBA_MDB_MAX - 1) + +enum { + MDBA_MDB_ENTRY_UNSPEC, + MDBA_MDB_ENTRY_INFO, + __MDBA_MDB_ENTRY_MAX, +}; +#define MDBA_MDB_ENTRY_MAX (__MDBA_MDB_ENTRY_MAX - 1) + +/* per mdb entry additional attributes */ +enum { + MDBA_MDB_EATTR_UNSPEC, + MDBA_MDB_EATTR_TIMER, + MDBA_MDB_EATTR_SRC_LIST, + MDBA_MDB_EATTR_GROUP_MODE, + MDBA_MDB_EATTR_SOURCE, + MDBA_MDB_EATTR_RTPROT, + __MDBA_MDB_EATTR_MAX +}; +#define MDBA_MDB_EATTR_MAX (__MDBA_MDB_EATTR_MAX - 1) + +/* per mdb entry source */ +enum { + MDBA_MDB_SRCLIST_UNSPEC, + MDBA_MDB_SRCLIST_ENTRY, + __MDBA_MDB_SRCLIST_MAX +}; +#define MDBA_MDB_SRCLIST_MAX (__MDBA_MDB_SRCLIST_MAX - 1) + +/* per mdb entry per source attributes + * these are embedded in MDBA_MDB_SRCLIST_ENTRY + */ +enum { + MDBA_MDB_SRCATTR_UNSPEC, + MDBA_MDB_SRCATTR_ADDRESS, + MDBA_MDB_SRCATTR_TIMER, + __MDBA_MDB_SRCATTR_MAX +}; +#define MDBA_MDB_SRCATTR_MAX (__MDBA_MDB_SRCATTR_MAX - 1) + +/* multicast router types */ +enum { + MDB_RTR_TYPE_DISABLED, + MDB_RTR_TYPE_TEMP_QUERY, + MDB_RTR_TYPE_PERM, + MDB_RTR_TYPE_TEMP +}; + +enum { + MDBA_ROUTER_UNSPEC, + MDBA_ROUTER_PORT, + __MDBA_ROUTER_MAX, +}; +#define MDBA_ROUTER_MAX (__MDBA_ROUTER_MAX - 1) + +/* router port attributes */ +enum { + MDBA_ROUTER_PATTR_UNSPEC, + MDBA_ROUTER_PATTR_TIMER, + MDBA_ROUTER_PATTR_TYPE, + MDBA_ROUTER_PATTR_INET_TIMER, + MDBA_ROUTER_PATTR_INET6_TIMER, + MDBA_ROUTER_PATTR_VID, + __MDBA_ROUTER_PATTR_MAX +}; +#define MDBA_ROUTER_PATTR_MAX (__MDBA_ROUTER_PATTR_MAX - 1) + +struct br_port_msg { + __u8 family; + __u32 ifindex; +}; + +struct br_mdb_entry { + __u32 ifindex; +#define MDB_TEMPORARY 0 +#define MDB_PERMANENT 1 + __u8 state; +#define MDB_FLAGS_OFFLOAD (1 << 0) +#define MDB_FLAGS_FAST_LEAVE (1 << 1) +#define MDB_FLAGS_STAR_EXCL (1 << 2) +#define MDB_FLAGS_BLOCKED (1 << 3) + __u8 flags; + __u16 vid; + struct { + union { + __be32 ip4; + struct in6_addr ip6; + unsigned char mac_addr[ETH_ALEN]; + } u; + __be16 proto; + } addr; +}; + +enum { + MDBA_SET_ENTRY_UNSPEC, + MDBA_SET_ENTRY, + MDBA_SET_ENTRY_ATTRS, + __MDBA_SET_ENTRY_MAX, +}; +#define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1) + +/* [MDBA_SET_ENTRY_ATTRS] = { + * [MDBE_ATTR_xxx] + * ... + * } + */ +enum { + MDBE_ATTR_UNSPEC, + MDBE_ATTR_SOURCE, + MDBE_ATTR_SRC_LIST, + MDBE_ATTR_GROUP_MODE, + MDBE_ATTR_RTPROT, + __MDBE_ATTR_MAX, +}; +#define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1) + +/* per mdb entry source */ +enum { + MDBE_SRC_LIST_UNSPEC, + MDBE_SRC_LIST_ENTRY, + __MDBE_SRC_LIST_MAX, +}; +#define MDBE_SRC_LIST_MAX (__MDBE_SRC_LIST_MAX - 1) + +/* per mdb entry per source attributes + * these are embedded in MDBE_SRC_LIST_ENTRY + */ +enum { + MDBE_SRCATTR_UNSPEC, + MDBE_SRCATTR_ADDRESS, + __MDBE_SRCATTR_MAX, +}; +#define MDBE_SRCATTR_MAX (__MDBE_SRCATTR_MAX - 1) + +/* Embedded inside LINK_XSTATS_TYPE_BRIDGE */ +enum { + BRIDGE_XSTATS_UNSPEC, + BRIDGE_XSTATS_VLAN, + BRIDGE_XSTATS_MCAST, + BRIDGE_XSTATS_PAD, + BRIDGE_XSTATS_STP, + __BRIDGE_XSTATS_MAX +}; +#define BRIDGE_XSTATS_MAX (__BRIDGE_XSTATS_MAX - 1) + +enum { + BR_MCAST_DIR_RX, + BR_MCAST_DIR_TX, + BR_MCAST_DIR_SIZE +}; + +/* IGMP/MLD statistics */ +struct br_mcast_stats { + __u64 igmp_v1queries[BR_MCAST_DIR_SIZE]; + __u64 igmp_v2queries[BR_MCAST_DIR_SIZE]; + __u64 igmp_v3queries[BR_MCAST_DIR_SIZE]; + __u64 igmp_leaves[BR_MCAST_DIR_SIZE]; + __u64 igmp_v1reports[BR_MCAST_DIR_SIZE]; + __u64 igmp_v2reports[BR_MCAST_DIR_SIZE]; + __u64 igmp_v3reports[BR_MCAST_DIR_SIZE]; + __u64 igmp_parse_errors; + + __u64 mld_v1queries[BR_MCAST_DIR_SIZE]; + __u64 mld_v2queries[BR_MCAST_DIR_SIZE]; + __u64 mld_leaves[BR_MCAST_DIR_SIZE]; + __u64 mld_v1reports[BR_MCAST_DIR_SIZE]; + __u64 mld_v2reports[BR_MCAST_DIR_SIZE]; + __u64 mld_parse_errors; + + __u64 mcast_bytes[BR_MCAST_DIR_SIZE]; + __u64 mcast_packets[BR_MCAST_DIR_SIZE]; +}; + +/* bridge boolean options + * BR_BOOLOPT_NO_LL_LEARN - disable learning from link-local packets + * BR_BOOLOPT_MCAST_VLAN_SNOOPING - control vlan multicast snooping + * + * IMPORTANT: if adding a new option do not forget to handle + * it in br_boolopt_toggle/get and bridge sysfs + */ +enum br_boolopt_id { + BR_BOOLOPT_NO_LL_LEARN, + BR_BOOLOPT_MCAST_VLAN_SNOOPING, + BR_BOOLOPT_MST_ENABLE, + BR_BOOLOPT_MAX +}; + +/* struct br_boolopt_multi - change multiple bridge boolean options + * + * @optval: new option values (bit per option) + * @optmask: options to change (bit per option) + */ +struct br_boolopt_multi { + __u32 optval; + __u32 optmask; +}; + +enum { + BRIDGE_QUERIER_UNSPEC, + BRIDGE_QUERIER_IP_ADDRESS, + BRIDGE_QUERIER_IP_PORT, + BRIDGE_QUERIER_IP_OTHER_TIMER, + BRIDGE_QUERIER_PAD, + BRIDGE_QUERIER_IPV6_ADDRESS, + BRIDGE_QUERIER_IPV6_PORT, + BRIDGE_QUERIER_IPV6_OTHER_TIMER, + __BRIDGE_QUERIER_MAX +}; +#define BRIDGE_QUERIER_MAX (__BRIDGE_QUERIER_MAX - 1) +#endif /* _UAPI_LINUX_IF_BRIDGE_H */ diff --git a/src/basic/linux/if_ether.h b/src/basic/linux/if_ether.h new file mode 100644 index 0000000..69e0457 --- /dev/null +++ b/src/basic/linux/if_ether.h @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the Ethernet IEEE 802.3 interface. + * + * Version: @(#)if_ether.h 1.0.1a 02/08/94 + * + * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Donald Becker, <becker@super.org> + * Alan Cox, <alan@lxorguk.ukuu.org.uk> + * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IF_ETHER_H +#define _UAPI_LINUX_IF_ETHER_H + +#include <linux/types.h> + +/* + * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble + * and FCS/CRC (frame check sequence). + */ + +#define ETH_ALEN 6 /* Octets in one ethernet addr */ +#define ETH_TLEN 2 /* Octets in ethernet type field */ +#define ETH_HLEN 14 /* Total octets in header. */ +#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ +#define ETH_DATA_LEN 1500 /* Max. octets in payload */ +#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ +#define ETH_FCS_LEN 4 /* Octets in the FCS */ + +#define ETH_MIN_MTU 68 /* Min IPv4 MTU per RFC791 */ +#define ETH_MAX_MTU 0xFFFFU /* 65535, same as IP_MAX_MTU */ + +/* + * These are the defined Ethernet Protocol ID's. + */ + +#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ +#define ETH_P_PUP 0x0200 /* Xerox PUP packet */ +#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ +#define ETH_P_TSN 0x22F0 /* TSN (IEEE 1722) packet */ +#define ETH_P_ERSPAN2 0x22EB /* ERSPAN version 2 (type III) */ +#define ETH_P_IP 0x0800 /* Internet Protocol packet */ +#define ETH_P_X25 0x0805 /* CCITT X.25 */ +#define ETH_P_ARP 0x0806 /* Address Resolution packet */ +#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ +#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ +#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DEC 0x6000 /* DEC Assigned proto */ +#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ +#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ +#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ +#define ETH_P_LAT 0x6004 /* DEC LAT */ +#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ +#define ETH_P_CUST 0x6006 /* DEC Customer use */ +#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ +#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */ +#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ +#define ETH_P_ATALK 0x809B /* Appletalk DDP */ +#define ETH_P_AARP 0x80F3 /* Appletalk AARP */ +#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ +#define ETH_P_ERSPAN 0x88BE /* ERSPAN type II */ +#define ETH_P_IPX 0x8137 /* IPX over DIX */ +#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ +#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */ +#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ +#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol + * defined in draft-wilson-wrec-wccp-v2-00.txt */ +#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ +#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ +#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ +#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ +#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ +#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ +#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport + * over Ethernet + */ +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#define ETH_P_PROFINET 0x8892 /* PROFINET */ +#define ETH_P_REALTEK 0x8899 /* Multiple proprietary protocols */ +#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ +#define ETH_P_ETHERCAT 0x88A4 /* EtherCAT */ +#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ +#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ +#define ETH_P_PREAUTH 0x88C7 /* 802.11 Preauthentication */ +#define ETH_P_TIPC 0x88CA /* TIPC */ +#define ETH_P_LLDP 0x88CC /* Link Layer Discovery Protocol */ +#define ETH_P_MRP 0x88E3 /* Media Redundancy Protocol */ +#define ETH_P_MACSEC 0x88E5 /* 802.1ae MACsec */ +#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ +#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */ +#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ +#define ETH_P_NCSI 0x88F8 /* NCSI protocol */ +#define ETH_P_PRP 0x88FB /* IEC 62439-3 PRP/HSRv0 */ +#define ETH_P_CFM 0x8902 /* Connectivity Fault Management */ +#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ +#define ETH_P_IBOE 0x8915 /* Infiniband over Ethernet */ +#define ETH_P_TDLS 0x890D /* TDLS */ +#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ +#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */ +#define ETH_P_HSR 0x892F /* IEC 62439-3 HSRv1 */ +#define ETH_P_NSH 0x894F /* Network Service Header */ +#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */ +#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DSA_8021Q 0xDADB /* Fake VLAN Header for DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DSA_A5PSW 0xE001 /* A5PSW Tag Value [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ +#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ + +#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is more than this value + * then the frame is Ethernet II. Else it is 802.3 */ + +/* + * Non DIX types. Won't clash for 1500 types. + */ + +#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ +#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ +#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ +#define ETH_P_802_2 0x0004 /* 802.2 frames */ +#define ETH_P_SNAP 0x0005 /* Internal only */ +#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ +#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ +#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ +#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ +#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ +#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ +#define ETH_P_CANXL 0x000E /* CANXL: eXtended frame Length */ +#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ +#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ +#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ +#define ETH_P_CONTROL 0x0016 /* Card specific control frames */ +#define ETH_P_IRDA 0x0017 /* Linux-IrDA */ +#define ETH_P_ECONET 0x0018 /* Acorn Econet */ +#define ETH_P_HDLC 0x0019 /* HDLC frames */ +#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */ +#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */ +#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ +#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ +#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ +#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ +#define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */ +#define ETH_P_MAP 0x00F9 /* Qualcomm multiplexing and + * aggregation protocol + */ +#define ETH_P_MCTP 0x00FA /* Management component transport + * protocol packets + */ + +/* + * This is an Ethernet frame header. + */ + +/* allow libcs like musl to deactivate this, glibc does not implement this. */ +#ifndef __UAPI_DEF_ETHHDR +#define __UAPI_DEF_ETHHDR 1 +#endif + +#if __UAPI_DEF_ETHHDR +struct ethhdr { + unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ + unsigned char h_source[ETH_ALEN]; /* source ether addr */ + __be16 h_proto; /* packet type ID field */ +} __attribute__((packed)); +#endif + + +#endif /* _UAPI_LINUX_IF_ETHER_H */ diff --git a/src/basic/linux/if_link.h b/src/basic/linux/if_link.h new file mode 100644 index 0000000..1021a7e --- /dev/null +++ b/src/basic/linux/if_link.h @@ -0,0 +1,1392 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_IF_LINK_H +#define _UAPI_LINUX_IF_LINK_H + +#include <linux/types.h> +#include <linux/netlink.h> + +/* This struct should be in sync with struct rtnl_link_stats64 */ +struct rtnl_link_stats { + __u32 rx_packets; + __u32 tx_packets; + __u32 rx_bytes; + __u32 tx_bytes; + __u32 rx_errors; + __u32 tx_errors; + __u32 rx_dropped; + __u32 tx_dropped; + __u32 multicast; + __u32 collisions; + /* detailed rx_errors: */ + __u32 rx_length_errors; + __u32 rx_over_errors; + __u32 rx_crc_errors; + __u32 rx_frame_errors; + __u32 rx_fifo_errors; + __u32 rx_missed_errors; + + /* detailed tx_errors */ + __u32 tx_aborted_errors; + __u32 tx_carrier_errors; + __u32 tx_fifo_errors; + __u32 tx_heartbeat_errors; + __u32 tx_window_errors; + + /* for cslip etc */ + __u32 rx_compressed; + __u32 tx_compressed; + + __u32 rx_nohandler; +}; + +/** + * struct rtnl_link_stats64 - The main device statistics structure. + * + * @rx_packets: Number of good packets received by the interface. + * For hardware interfaces counts all good packets received from the device + * by the host, including packets which host had to drop at various stages + * of processing (even in the driver). + * + * @tx_packets: Number of packets successfully transmitted. + * For hardware interfaces counts packets which host was able to successfully + * hand over to the device, which does not necessarily mean that packets + * had been successfully transmitted out of the device, only that device + * acknowledged it copied them out of host memory. + * + * @rx_bytes: Number of good received bytes, corresponding to @rx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @tx_bytes: Number of good transmitted bytes, corresponding to @tx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @rx_errors: Total number of bad packets received on this network device. + * This counter must include events counted by @rx_length_errors, + * @rx_crc_errors, @rx_frame_errors and other errors not otherwise + * counted. + * + * @tx_errors: Total number of transmit problems. + * This counter must include events counter by @tx_aborted_errors, + * @tx_carrier_errors, @tx_fifo_errors, @tx_heartbeat_errors, + * @tx_window_errors and other errors not otherwise counted. + * + * @rx_dropped: Number of packets received but not processed, + * e.g. due to lack of resources or unsupported protocol. + * For hardware interfaces this counter may include packets discarded + * due to L2 address filtering but should not include packets dropped + * by the device due to buffer exhaustion which are counted separately in + * @rx_missed_errors (since procfs folds those two counters together). + * + * @tx_dropped: Number of packets dropped on their way to transmission, + * e.g. due to lack of resources. + * + * @multicast: Multicast packets received. + * For hardware interfaces this statistic is commonly calculated + * at the device level (unlike @rx_packets) and therefore may include + * packets which did not reach the host. + * + * For IEEE 802.3 devices this counter may be equivalent to: + * + * - 30.3.1.1.21 aMulticastFramesReceivedOK + * + * @collisions: Number of collisions during packet transmissions. + * + * @rx_length_errors: Number of packets dropped due to invalid length. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to a sum + * of the following attributes: + * + * - 30.3.1.1.23 aInRangeLengthErrors + * - 30.3.1.1.24 aOutOfRangeLengthField + * - 30.3.1.1.25 aFrameTooLongErrors + * + * @rx_over_errors: Receiver FIFO overflow event counter. + * + * Historically the count of overflow events. Such events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * The recommended interpretation for high speed interfaces is - + * number of packets dropped because they did not fit into buffers + * provided by the host, e.g. packets larger than MTU or next buffer + * in the ring was not available for a scatter transfer. + * + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * This statistics was historically used interchangeably with + * @rx_fifo_errors. + * + * This statistic corresponds to hardware events and is not commonly used + * on software devices. + * + * @rx_crc_errors: Number of packets received with a CRC error. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.6 aFrameCheckSequenceErrors + * + * @rx_frame_errors: Receiver frame alignment errors. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to: + * + * - 30.3.1.1.7 aAlignmentErrors + * + * @rx_fifo_errors: Receiver FIFO error counter. + * + * Historically the count of overflow events. Those events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * This statistics was used interchangeably with @rx_over_errors. + * Not recommended for use in drivers for high speed interfaces. + * + * This statistic is used on software devices, e.g. to count software + * packet queue overflow (can) or sequencing errors (GRE). + * + * @rx_missed_errors: Count of packets missed by the host. + * Folded into the "drop" counter in `/proc/net/dev`. + * + * Counts number of packets dropped by the device due to lack + * of buffer space. This usually indicates that the host interface + * is slower than the network interface, or host is not keeping up + * with the receive packet rate. + * + * This statistic corresponds to hardware events and is not used + * on software devices. + * + * @tx_aborted_errors: + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * For IEEE 802.3 devices capable of half-duplex operation this counter + * must be equivalent to: + * + * - 30.3.1.1.11 aFramesAbortedDueToXSColls + * + * High speed interfaces may use this counter as a general device + * discard counter. + * + * @tx_carrier_errors: Number of frame transmission errors due to loss + * of carrier during transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.13 aCarrierSenseErrors + * + * @tx_fifo_errors: Number of frame transmission errors due to device + * FIFO underrun / underflow. This condition occurs when the device + * begins transmission of a frame but is unable to deliver the + * entire frame to the transmitter in time for transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * @tx_heartbeat_errors: Number of Heartbeat / SQE Test errors for + * old half-duplex Ethernet. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices possibly equivalent to: + * + * - 30.3.2.1.4 aSQETestErrors + * + * @tx_window_errors: Number of frame transmission errors due + * to late collisions (for Ethernet - after the first 64B of transmission). + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.10 aLateCollisions + * + * @rx_compressed: Number of correctly received compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @tx_compressed: Number of transmitted compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @rx_nohandler: Number of packets received on the interface + * but dropped by the networking stack because the device is + * not designated to receive packets (e.g. backup link in a bond). + * + * @rx_otherhost_dropped: Number of packets dropped due to mismatch + * in destination MAC address. + */ +struct rtnl_link_stats64 { + __u64 rx_packets; + __u64 tx_packets; + __u64 rx_bytes; + __u64 tx_bytes; + __u64 rx_errors; + __u64 tx_errors; + __u64 rx_dropped; + __u64 tx_dropped; + __u64 multicast; + __u64 collisions; + + /* detailed rx_errors: */ + __u64 rx_length_errors; + __u64 rx_over_errors; + __u64 rx_crc_errors; + __u64 rx_frame_errors; + __u64 rx_fifo_errors; + __u64 rx_missed_errors; + + /* detailed tx_errors */ + __u64 tx_aborted_errors; + __u64 tx_carrier_errors; + __u64 tx_fifo_errors; + __u64 tx_heartbeat_errors; + __u64 tx_window_errors; + + /* for cslip etc */ + __u64 rx_compressed; + __u64 tx_compressed; + __u64 rx_nohandler; + + __u64 rx_otherhost_dropped; +}; + +/* Subset of link stats useful for in-HW collection. Meaning of the fields is as + * for struct rtnl_link_stats64. + */ +struct rtnl_hw_stats64 { + __u64 rx_packets; + __u64 tx_packets; + __u64 rx_bytes; + __u64 tx_bytes; + __u64 rx_errors; + __u64 tx_errors; + __u64 rx_dropped; + __u64 tx_dropped; + __u64 multicast; +}; + +/* The struct should be in sync with struct ifmap */ +struct rtnl_link_ifmap { + __u64 mem_start; + __u64 mem_end; + __u64 base_addr; + __u16 irq; + __u8 dma; + __u8 port; +}; + +/* + * IFLA_AF_SPEC + * Contains nested attributes for address family specific attributes. + * Each address family may create a attribute with the address family + * number as type and create its own attribute structure in it. + * + * Example: + * [IFLA_AF_SPEC] = { + * [AF_INET] = { + * [IFLA_INET_CONF] = ..., + * }, + * [AF_INET6] = { + * [IFLA_INET6_FLAGS] = ..., + * [IFLA_INET6_CONF] = ..., + * } + * } + */ + +enum { + IFLA_UNSPEC, + IFLA_ADDRESS, + IFLA_BROADCAST, + IFLA_IFNAME, + IFLA_MTU, + IFLA_LINK, + IFLA_QDISC, + IFLA_STATS, + IFLA_COST, +#define IFLA_COST IFLA_COST + IFLA_PRIORITY, +#define IFLA_PRIORITY IFLA_PRIORITY + IFLA_MASTER, +#define IFLA_MASTER IFLA_MASTER + IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */ +#define IFLA_WIRELESS IFLA_WIRELESS + IFLA_PROTINFO, /* Protocol specific information for a link */ +#define IFLA_PROTINFO IFLA_PROTINFO + IFLA_TXQLEN, +#define IFLA_TXQLEN IFLA_TXQLEN + IFLA_MAP, +#define IFLA_MAP IFLA_MAP + IFLA_WEIGHT, +#define IFLA_WEIGHT IFLA_WEIGHT + IFLA_OPERSTATE, + IFLA_LINKMODE, + IFLA_LINKINFO, +#define IFLA_LINKINFO IFLA_LINKINFO + IFLA_NET_NS_PID, + IFLA_IFALIAS, + IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */ + IFLA_VFINFO_LIST, + IFLA_STATS64, + IFLA_VF_PORTS, + IFLA_PORT_SELF, + IFLA_AF_SPEC, + IFLA_GROUP, /* Group the device belongs to */ + IFLA_NET_NS_FD, + IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ + IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ +#define IFLA_PROMISCUITY IFLA_PROMISCUITY + IFLA_NUM_TX_QUEUES, + IFLA_NUM_RX_QUEUES, + IFLA_CARRIER, + IFLA_PHYS_PORT_ID, + IFLA_CARRIER_CHANGES, + IFLA_PHYS_SWITCH_ID, + IFLA_LINK_NETNSID, + IFLA_PHYS_PORT_NAME, + IFLA_PROTO_DOWN, + IFLA_GSO_MAX_SEGS, + IFLA_GSO_MAX_SIZE, + IFLA_PAD, + IFLA_XDP, + IFLA_EVENT, + IFLA_NEW_NETNSID, + IFLA_IF_NETNSID, + IFLA_TARGET_NETNSID = IFLA_IF_NETNSID, /* new alias */ + IFLA_CARRIER_UP_COUNT, + IFLA_CARRIER_DOWN_COUNT, + IFLA_NEW_IFINDEX, + IFLA_MIN_MTU, + IFLA_MAX_MTU, + IFLA_PROP_LIST, + IFLA_ALT_IFNAME, /* Alternative ifname */ + IFLA_PERM_ADDRESS, + IFLA_PROTO_DOWN_REASON, + + /* device (sysfs) name as parent, used instead + * of IFLA_LINK where there's no parent netdev + */ + IFLA_PARENT_DEV_NAME, + IFLA_PARENT_DEV_BUS_NAME, + IFLA_GRO_MAX_SIZE, + IFLA_TSO_MAX_SIZE, + IFLA_TSO_MAX_SEGS, + IFLA_ALLMULTI, /* Allmulti count: > 0 means acts ALLMULTI */ + + IFLA_DEVLINK_PORT, + + __IFLA_MAX +}; + + +#define IFLA_MAX (__IFLA_MAX - 1) + +enum { + IFLA_PROTO_DOWN_REASON_UNSPEC, + IFLA_PROTO_DOWN_REASON_MASK, /* u32, mask for reason bits */ + IFLA_PROTO_DOWN_REASON_VALUE, /* u32, reason bit value */ + + __IFLA_PROTO_DOWN_REASON_CNT, + IFLA_PROTO_DOWN_REASON_MAX = __IFLA_PROTO_DOWN_REASON_CNT - 1 +}; + +/* backwards compatibility for userspace */ +#ifndef __KERNEL__ +#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) +#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg)) +#endif + +enum { + IFLA_INET_UNSPEC, + IFLA_INET_CONF, + __IFLA_INET_MAX, +}; + +#define IFLA_INET_MAX (__IFLA_INET_MAX - 1) + +/* ifi_flags. + + IFF_* flags. + + The only change is: + IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are + more not changeable by user. They describe link media + characteristics and set by device driver. + + Comments: + - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid + - If neither of these three flags are set; + the interface is NBMA. + + - IFF_MULTICAST does not mean anything special: + multicasts can be used on all not-NBMA links. + IFF_MULTICAST means that this media uses special encapsulation + for multicast frames. Apparently, all IFF_POINTOPOINT and + IFF_BROADCAST devices are able to use multicasts too. + */ + +/* IFLA_LINK. + For usual devices it is equal ifi_index. + If it is a "virtual interface" (f.e. tunnel), ifi_link + can point to real physical interface (f.e. for bandwidth calculations), + or maybe 0, what means, that real media is unknown (usual + for IPIP tunnels, when route to endpoint is allowed to change) + */ + +/* Subtype attributes for IFLA_PROTINFO */ +enum { + IFLA_INET6_UNSPEC, + IFLA_INET6_FLAGS, /* link flags */ + IFLA_INET6_CONF, /* sysctl parameters */ + IFLA_INET6_STATS, /* statistics */ + IFLA_INET6_MCAST, /* MC things. What of them? */ + IFLA_INET6_CACHEINFO, /* time values and max reasm size */ + IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ + IFLA_INET6_TOKEN, /* device token */ + IFLA_INET6_ADDR_GEN_MODE, /* implicit address generator mode */ + IFLA_INET6_RA_MTU, /* mtu carried in the RA message */ + __IFLA_INET6_MAX +}; + +#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) + +enum in6_addr_gen_mode { + IN6_ADDR_GEN_MODE_EUI64, + IN6_ADDR_GEN_MODE_NONE, + IN6_ADDR_GEN_MODE_STABLE_PRIVACY, + IN6_ADDR_GEN_MODE_RANDOM, +}; + +/* Bridge section */ + +enum { + IFLA_BR_UNSPEC, + IFLA_BR_FORWARD_DELAY, + IFLA_BR_HELLO_TIME, + IFLA_BR_MAX_AGE, + IFLA_BR_AGEING_TIME, + IFLA_BR_STP_STATE, + IFLA_BR_PRIORITY, + IFLA_BR_VLAN_FILTERING, + IFLA_BR_VLAN_PROTOCOL, + IFLA_BR_GROUP_FWD_MASK, + IFLA_BR_ROOT_ID, + IFLA_BR_BRIDGE_ID, + IFLA_BR_ROOT_PORT, + IFLA_BR_ROOT_PATH_COST, + IFLA_BR_TOPOLOGY_CHANGE, + IFLA_BR_TOPOLOGY_CHANGE_DETECTED, + IFLA_BR_HELLO_TIMER, + IFLA_BR_TCN_TIMER, + IFLA_BR_TOPOLOGY_CHANGE_TIMER, + IFLA_BR_GC_TIMER, + IFLA_BR_GROUP_ADDR, + IFLA_BR_FDB_FLUSH, + IFLA_BR_MCAST_ROUTER, + IFLA_BR_MCAST_SNOOPING, + IFLA_BR_MCAST_QUERY_USE_IFADDR, + IFLA_BR_MCAST_QUERIER, + IFLA_BR_MCAST_HASH_ELASTICITY, + IFLA_BR_MCAST_HASH_MAX, + IFLA_BR_MCAST_LAST_MEMBER_CNT, + IFLA_BR_MCAST_STARTUP_QUERY_CNT, + IFLA_BR_MCAST_LAST_MEMBER_INTVL, + IFLA_BR_MCAST_MEMBERSHIP_INTVL, + IFLA_BR_MCAST_QUERIER_INTVL, + IFLA_BR_MCAST_QUERY_INTVL, + IFLA_BR_MCAST_QUERY_RESPONSE_INTVL, + IFLA_BR_MCAST_STARTUP_QUERY_INTVL, + IFLA_BR_NF_CALL_IPTABLES, + IFLA_BR_NF_CALL_IP6TABLES, + IFLA_BR_NF_CALL_ARPTABLES, + IFLA_BR_VLAN_DEFAULT_PVID, + IFLA_BR_PAD, + IFLA_BR_VLAN_STATS_ENABLED, + IFLA_BR_MCAST_STATS_ENABLED, + IFLA_BR_MCAST_IGMP_VERSION, + IFLA_BR_MCAST_MLD_VERSION, + IFLA_BR_VLAN_STATS_PER_PORT, + IFLA_BR_MULTI_BOOLOPT, + IFLA_BR_MCAST_QUERIER_STATE, + __IFLA_BR_MAX, +}; + +#define IFLA_BR_MAX (__IFLA_BR_MAX - 1) + +struct ifla_bridge_id { + __u8 prio[2]; + __u8 addr[6]; /* ETH_ALEN */ +}; + +enum { + BRIDGE_MODE_UNSPEC, + BRIDGE_MODE_HAIRPIN, +}; + +enum { + IFLA_BRPORT_UNSPEC, + IFLA_BRPORT_STATE, /* Spanning tree state */ + IFLA_BRPORT_PRIORITY, /* " priority */ + IFLA_BRPORT_COST, /* " cost */ + IFLA_BRPORT_MODE, /* mode (hairpin) */ + IFLA_BRPORT_GUARD, /* bpdu guard */ + IFLA_BRPORT_PROTECT, /* root port protection */ + IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */ + IFLA_BRPORT_LEARNING, /* mac learning */ + IFLA_BRPORT_UNICAST_FLOOD, /* flood unicast traffic */ + IFLA_BRPORT_PROXYARP, /* proxy ARP */ + IFLA_BRPORT_LEARNING_SYNC, /* mac learning sync from device */ + IFLA_BRPORT_PROXYARP_WIFI, /* proxy ARP for Wi-Fi */ + IFLA_BRPORT_ROOT_ID, /* designated root */ + IFLA_BRPORT_BRIDGE_ID, /* designated bridge */ + IFLA_BRPORT_DESIGNATED_PORT, + IFLA_BRPORT_DESIGNATED_COST, + IFLA_BRPORT_ID, + IFLA_BRPORT_NO, + IFLA_BRPORT_TOPOLOGY_CHANGE_ACK, + IFLA_BRPORT_CONFIG_PENDING, + IFLA_BRPORT_MESSAGE_AGE_TIMER, + IFLA_BRPORT_FORWARD_DELAY_TIMER, + IFLA_BRPORT_HOLD_TIMER, + IFLA_BRPORT_FLUSH, + IFLA_BRPORT_MULTICAST_ROUTER, + IFLA_BRPORT_PAD, + IFLA_BRPORT_MCAST_FLOOD, + IFLA_BRPORT_MCAST_TO_UCAST, + IFLA_BRPORT_VLAN_TUNNEL, + IFLA_BRPORT_BCAST_FLOOD, + IFLA_BRPORT_GROUP_FWD_MASK, + IFLA_BRPORT_NEIGH_SUPPRESS, + IFLA_BRPORT_ISOLATED, + IFLA_BRPORT_BACKUP_PORT, + IFLA_BRPORT_MRP_RING_OPEN, + IFLA_BRPORT_MRP_IN_OPEN, + IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT, + IFLA_BRPORT_MCAST_EHT_HOSTS_CNT, + IFLA_BRPORT_LOCKED, + IFLA_BRPORT_MAB, + __IFLA_BRPORT_MAX +}; +#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) + +struct ifla_cacheinfo { + __u32 max_reasm_len; + __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ + __u32 reachable_time; + __u32 retrans_time; +}; + +enum { + IFLA_INFO_UNSPEC, + IFLA_INFO_KIND, + IFLA_INFO_DATA, + IFLA_INFO_XSTATS, + IFLA_INFO_SLAVE_KIND, + IFLA_INFO_SLAVE_DATA, + __IFLA_INFO_MAX, +}; + +#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1) + +/* VLAN section */ + +enum { + IFLA_VLAN_UNSPEC, + IFLA_VLAN_ID, + IFLA_VLAN_FLAGS, + IFLA_VLAN_EGRESS_QOS, + IFLA_VLAN_INGRESS_QOS, + IFLA_VLAN_PROTOCOL, + __IFLA_VLAN_MAX, +}; + +#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1) + +struct ifla_vlan_flags { + __u32 flags; + __u32 mask; +}; + +enum { + IFLA_VLAN_QOS_UNSPEC, + IFLA_VLAN_QOS_MAPPING, + __IFLA_VLAN_QOS_MAX +}; + +#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1) + +struct ifla_vlan_qos_mapping { + __u32 from; + __u32 to; +}; + +/* MACVLAN section */ +enum { + IFLA_MACVLAN_UNSPEC, + IFLA_MACVLAN_MODE, + IFLA_MACVLAN_FLAGS, + IFLA_MACVLAN_MACADDR_MODE, + IFLA_MACVLAN_MACADDR, + IFLA_MACVLAN_MACADDR_DATA, + IFLA_MACVLAN_MACADDR_COUNT, + IFLA_MACVLAN_BC_QUEUE_LEN, + IFLA_MACVLAN_BC_QUEUE_LEN_USED, + __IFLA_MACVLAN_MAX, +}; + +#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1) + +enum macvlan_mode { + MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */ + MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */ + MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ + MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */ + MACVLAN_MODE_SOURCE = 16,/* use source MAC address list to assign */ +}; + +enum macvlan_macaddr_mode { + MACVLAN_MACADDR_ADD, + MACVLAN_MACADDR_DEL, + MACVLAN_MACADDR_FLUSH, + MACVLAN_MACADDR_SET, +}; + +#define MACVLAN_FLAG_NOPROMISC 1 +#define MACVLAN_FLAG_NODST 2 /* skip dst macvlan if matching src macvlan */ + +/* VRF section */ +enum { + IFLA_VRF_UNSPEC, + IFLA_VRF_TABLE, + __IFLA_VRF_MAX +}; + +#define IFLA_VRF_MAX (__IFLA_VRF_MAX - 1) + +enum { + IFLA_VRF_PORT_UNSPEC, + IFLA_VRF_PORT_TABLE, + __IFLA_VRF_PORT_MAX +}; + +#define IFLA_VRF_PORT_MAX (__IFLA_VRF_PORT_MAX - 1) + +/* MACSEC section */ +enum { + IFLA_MACSEC_UNSPEC, + IFLA_MACSEC_SCI, + IFLA_MACSEC_PORT, + IFLA_MACSEC_ICV_LEN, + IFLA_MACSEC_CIPHER_SUITE, + IFLA_MACSEC_WINDOW, + IFLA_MACSEC_ENCODING_SA, + IFLA_MACSEC_ENCRYPT, + IFLA_MACSEC_PROTECT, + IFLA_MACSEC_INC_SCI, + IFLA_MACSEC_ES, + IFLA_MACSEC_SCB, + IFLA_MACSEC_REPLAY_PROTECT, + IFLA_MACSEC_VALIDATION, + IFLA_MACSEC_PAD, + IFLA_MACSEC_OFFLOAD, + __IFLA_MACSEC_MAX, +}; + +#define IFLA_MACSEC_MAX (__IFLA_MACSEC_MAX - 1) + +/* XFRM section */ +enum { + IFLA_XFRM_UNSPEC, + IFLA_XFRM_LINK, + IFLA_XFRM_IF_ID, + IFLA_XFRM_COLLECT_METADATA, + __IFLA_XFRM_MAX +}; + +#define IFLA_XFRM_MAX (__IFLA_XFRM_MAX - 1) + +enum macsec_validation_type { + MACSEC_VALIDATE_DISABLED = 0, + MACSEC_VALIDATE_CHECK = 1, + MACSEC_VALIDATE_STRICT = 2, + __MACSEC_VALIDATE_END, + MACSEC_VALIDATE_MAX = __MACSEC_VALIDATE_END - 1, +}; + +enum macsec_offload { + MACSEC_OFFLOAD_OFF = 0, + MACSEC_OFFLOAD_PHY = 1, + MACSEC_OFFLOAD_MAC = 2, + __MACSEC_OFFLOAD_END, + MACSEC_OFFLOAD_MAX = __MACSEC_OFFLOAD_END - 1, +}; + +/* IPVLAN section */ +enum { + IFLA_IPVLAN_UNSPEC, + IFLA_IPVLAN_MODE, + IFLA_IPVLAN_FLAGS, + __IFLA_IPVLAN_MAX +}; + +#define IFLA_IPVLAN_MAX (__IFLA_IPVLAN_MAX - 1) + +enum ipvlan_mode { + IPVLAN_MODE_L2 = 0, + IPVLAN_MODE_L3, + IPVLAN_MODE_L3S, + IPVLAN_MODE_MAX +}; + +#define IPVLAN_F_PRIVATE 0x01 +#define IPVLAN_F_VEPA 0x02 + +/* Tunnel RTM header */ +struct tunnel_msg { + __u8 family; + __u8 flags; + __u16 reserved2; + __u32 ifindex; +}; + +/* VXLAN section */ + +/* include statistics in the dump */ +#define TUNNEL_MSG_FLAG_STATS 0x01 + +#define TUNNEL_MSG_VALID_USER_FLAGS TUNNEL_MSG_FLAG_STATS + +/* Embedded inside VXLAN_VNIFILTER_ENTRY_STATS */ +enum { + VNIFILTER_ENTRY_STATS_UNSPEC, + VNIFILTER_ENTRY_STATS_RX_BYTES, + VNIFILTER_ENTRY_STATS_RX_PKTS, + VNIFILTER_ENTRY_STATS_RX_DROPS, + VNIFILTER_ENTRY_STATS_RX_ERRORS, + VNIFILTER_ENTRY_STATS_TX_BYTES, + VNIFILTER_ENTRY_STATS_TX_PKTS, + VNIFILTER_ENTRY_STATS_TX_DROPS, + VNIFILTER_ENTRY_STATS_TX_ERRORS, + VNIFILTER_ENTRY_STATS_PAD, + __VNIFILTER_ENTRY_STATS_MAX +}; +#define VNIFILTER_ENTRY_STATS_MAX (__VNIFILTER_ENTRY_STATS_MAX - 1) + +enum { + VXLAN_VNIFILTER_ENTRY_UNSPEC, + VXLAN_VNIFILTER_ENTRY_START, + VXLAN_VNIFILTER_ENTRY_END, + VXLAN_VNIFILTER_ENTRY_GROUP, + VXLAN_VNIFILTER_ENTRY_GROUP6, + VXLAN_VNIFILTER_ENTRY_STATS, + __VXLAN_VNIFILTER_ENTRY_MAX +}; +#define VXLAN_VNIFILTER_ENTRY_MAX (__VXLAN_VNIFILTER_ENTRY_MAX - 1) + +enum { + VXLAN_VNIFILTER_UNSPEC, + VXLAN_VNIFILTER_ENTRY, + __VXLAN_VNIFILTER_MAX +}; +#define VXLAN_VNIFILTER_MAX (__VXLAN_VNIFILTER_MAX - 1) + +enum { + IFLA_VXLAN_UNSPEC, + IFLA_VXLAN_ID, + IFLA_VXLAN_GROUP, /* group or remote address */ + IFLA_VXLAN_LINK, + IFLA_VXLAN_LOCAL, + IFLA_VXLAN_TTL, + IFLA_VXLAN_TOS, + IFLA_VXLAN_LEARNING, + IFLA_VXLAN_AGEING, + IFLA_VXLAN_LIMIT, + IFLA_VXLAN_PORT_RANGE, /* source port */ + IFLA_VXLAN_PROXY, + IFLA_VXLAN_RSC, + IFLA_VXLAN_L2MISS, + IFLA_VXLAN_L3MISS, + IFLA_VXLAN_PORT, /* destination port */ + IFLA_VXLAN_GROUP6, + IFLA_VXLAN_LOCAL6, + IFLA_VXLAN_UDP_CSUM, + IFLA_VXLAN_UDP_ZERO_CSUM6_TX, + IFLA_VXLAN_UDP_ZERO_CSUM6_RX, + IFLA_VXLAN_REMCSUM_TX, + IFLA_VXLAN_REMCSUM_RX, + IFLA_VXLAN_GBP, + IFLA_VXLAN_REMCSUM_NOPARTIAL, + IFLA_VXLAN_COLLECT_METADATA, + IFLA_VXLAN_LABEL, + IFLA_VXLAN_GPE, + IFLA_VXLAN_TTL_INHERIT, + IFLA_VXLAN_DF, + IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */ + __IFLA_VXLAN_MAX +}; +#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) + +struct ifla_vxlan_port_range { + __be16 low; + __be16 high; +}; + +enum ifla_vxlan_df { + VXLAN_DF_UNSET = 0, + VXLAN_DF_SET, + VXLAN_DF_INHERIT, + __VXLAN_DF_END, + VXLAN_DF_MAX = __VXLAN_DF_END - 1, +}; + +/* GENEVE section */ +enum { + IFLA_GENEVE_UNSPEC, + IFLA_GENEVE_ID, + IFLA_GENEVE_REMOTE, + IFLA_GENEVE_TTL, + IFLA_GENEVE_TOS, + IFLA_GENEVE_PORT, /* destination port */ + IFLA_GENEVE_COLLECT_METADATA, + IFLA_GENEVE_REMOTE6, + IFLA_GENEVE_UDP_CSUM, + IFLA_GENEVE_UDP_ZERO_CSUM6_TX, + IFLA_GENEVE_UDP_ZERO_CSUM6_RX, + IFLA_GENEVE_LABEL, + IFLA_GENEVE_TTL_INHERIT, + IFLA_GENEVE_DF, + IFLA_GENEVE_INNER_PROTO_INHERIT, + __IFLA_GENEVE_MAX +}; +#define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) + +enum ifla_geneve_df { + GENEVE_DF_UNSET = 0, + GENEVE_DF_SET, + GENEVE_DF_INHERIT, + __GENEVE_DF_END, + GENEVE_DF_MAX = __GENEVE_DF_END - 1, +}; + +/* Bareudp section */ +enum { + IFLA_BAREUDP_UNSPEC, + IFLA_BAREUDP_PORT, + IFLA_BAREUDP_ETHERTYPE, + IFLA_BAREUDP_SRCPORT_MIN, + IFLA_BAREUDP_MULTIPROTO_MODE, + __IFLA_BAREUDP_MAX +}; + +#define IFLA_BAREUDP_MAX (__IFLA_BAREUDP_MAX - 1) + +/* PPP section */ +enum { + IFLA_PPP_UNSPEC, + IFLA_PPP_DEV_FD, + __IFLA_PPP_MAX +}; +#define IFLA_PPP_MAX (__IFLA_PPP_MAX - 1) + +/* GTP section */ + +enum ifla_gtp_role { + GTP_ROLE_GGSN = 0, + GTP_ROLE_SGSN, +}; + +enum { + IFLA_GTP_UNSPEC, + IFLA_GTP_FD0, + IFLA_GTP_FD1, + IFLA_GTP_PDP_HASHSIZE, + IFLA_GTP_ROLE, + IFLA_GTP_CREATE_SOCKETS, + IFLA_GTP_RESTART_COUNT, + __IFLA_GTP_MAX, +}; +#define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1) + +/* Bonding section */ + +enum { + IFLA_BOND_UNSPEC, + IFLA_BOND_MODE, + IFLA_BOND_ACTIVE_SLAVE, + IFLA_BOND_MIIMON, + IFLA_BOND_UPDELAY, + IFLA_BOND_DOWNDELAY, + IFLA_BOND_USE_CARRIER, + IFLA_BOND_ARP_INTERVAL, + IFLA_BOND_ARP_IP_TARGET, + IFLA_BOND_ARP_VALIDATE, + IFLA_BOND_ARP_ALL_TARGETS, + IFLA_BOND_PRIMARY, + IFLA_BOND_PRIMARY_RESELECT, + IFLA_BOND_FAIL_OVER_MAC, + IFLA_BOND_XMIT_HASH_POLICY, + IFLA_BOND_RESEND_IGMP, + IFLA_BOND_NUM_PEER_NOTIF, + IFLA_BOND_ALL_SLAVES_ACTIVE, + IFLA_BOND_MIN_LINKS, + IFLA_BOND_LP_INTERVAL, + IFLA_BOND_PACKETS_PER_SLAVE, + IFLA_BOND_AD_LACP_RATE, + IFLA_BOND_AD_SELECT, + IFLA_BOND_AD_INFO, + IFLA_BOND_AD_ACTOR_SYS_PRIO, + IFLA_BOND_AD_USER_PORT_KEY, + IFLA_BOND_AD_ACTOR_SYSTEM, + IFLA_BOND_TLB_DYNAMIC_LB, + IFLA_BOND_PEER_NOTIF_DELAY, + IFLA_BOND_AD_LACP_ACTIVE, + IFLA_BOND_MISSED_MAX, + IFLA_BOND_NS_IP6_TARGET, + __IFLA_BOND_MAX, +}; + +#define IFLA_BOND_MAX (__IFLA_BOND_MAX - 1) + +enum { + IFLA_BOND_AD_INFO_UNSPEC, + IFLA_BOND_AD_INFO_AGGREGATOR, + IFLA_BOND_AD_INFO_NUM_PORTS, + IFLA_BOND_AD_INFO_ACTOR_KEY, + IFLA_BOND_AD_INFO_PARTNER_KEY, + IFLA_BOND_AD_INFO_PARTNER_MAC, + __IFLA_BOND_AD_INFO_MAX, +}; + +#define IFLA_BOND_AD_INFO_MAX (__IFLA_BOND_AD_INFO_MAX - 1) + +enum { + IFLA_BOND_SLAVE_UNSPEC, + IFLA_BOND_SLAVE_STATE, + IFLA_BOND_SLAVE_MII_STATUS, + IFLA_BOND_SLAVE_LINK_FAILURE_COUNT, + IFLA_BOND_SLAVE_PERM_HWADDR, + IFLA_BOND_SLAVE_QUEUE_ID, + IFLA_BOND_SLAVE_AD_AGGREGATOR_ID, + IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE, + IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE, + IFLA_BOND_SLAVE_PRIO, + __IFLA_BOND_SLAVE_MAX, +}; + +#define IFLA_BOND_SLAVE_MAX (__IFLA_BOND_SLAVE_MAX - 1) + +/* SR-IOV virtual function management section */ + +enum { + IFLA_VF_INFO_UNSPEC, + IFLA_VF_INFO, + __IFLA_VF_INFO_MAX, +}; + +#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1) + +enum { + IFLA_VF_UNSPEC, + IFLA_VF_MAC, /* Hardware queue specific attributes */ + IFLA_VF_VLAN, /* VLAN ID and QoS */ + IFLA_VF_TX_RATE, /* Max TX Bandwidth Allocation */ + IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ + IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */ + IFLA_VF_RATE, /* Min and Max TX Bandwidth Allocation */ + IFLA_VF_RSS_QUERY_EN, /* RSS Redirection Table and Hash Key query + * on/off switch + */ + IFLA_VF_STATS, /* network device statistics */ + IFLA_VF_TRUST, /* Trust VF */ + IFLA_VF_IB_NODE_GUID, /* VF Infiniband node GUID */ + IFLA_VF_IB_PORT_GUID, /* VF Infiniband port GUID */ + IFLA_VF_VLAN_LIST, /* nested list of vlans, option for QinQ */ + IFLA_VF_BROADCAST, /* VF broadcast */ + __IFLA_VF_MAX, +}; + +#define IFLA_VF_MAX (__IFLA_VF_MAX - 1) + +struct ifla_vf_mac { + __u32 vf; + __u8 mac[32]; /* MAX_ADDR_LEN */ +}; + +struct ifla_vf_broadcast { + __u8 broadcast[32]; +}; + +struct ifla_vf_vlan { + __u32 vf; + __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ + __u32 qos; +}; + +enum { + IFLA_VF_VLAN_INFO_UNSPEC, + IFLA_VF_VLAN_INFO, /* VLAN ID, QoS and VLAN protocol */ + __IFLA_VF_VLAN_INFO_MAX, +}; + +#define IFLA_VF_VLAN_INFO_MAX (__IFLA_VF_VLAN_INFO_MAX - 1) +#define MAX_VLAN_LIST_LEN 1 + +struct ifla_vf_vlan_info { + __u32 vf; + __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ + __u32 qos; + __be16 vlan_proto; /* VLAN protocol either 802.1Q or 802.1ad */ +}; + +struct ifla_vf_tx_rate { + __u32 vf; + __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ +}; + +struct ifla_vf_rate { + __u32 vf; + __u32 min_tx_rate; /* Min Bandwidth in Mbps */ + __u32 max_tx_rate; /* Max Bandwidth in Mbps */ +}; + +struct ifla_vf_spoofchk { + __u32 vf; + __u32 setting; +}; + +struct ifla_vf_guid { + __u32 vf; + __u64 guid; +}; + +enum { + IFLA_VF_LINK_STATE_AUTO, /* link state of the uplink */ + IFLA_VF_LINK_STATE_ENABLE, /* link always up */ + IFLA_VF_LINK_STATE_DISABLE, /* link always down */ + __IFLA_VF_LINK_STATE_MAX, +}; + +struct ifla_vf_link_state { + __u32 vf; + __u32 link_state; +}; + +struct ifla_vf_rss_query_en { + __u32 vf; + __u32 setting; +}; + +enum { + IFLA_VF_STATS_RX_PACKETS, + IFLA_VF_STATS_TX_PACKETS, + IFLA_VF_STATS_RX_BYTES, + IFLA_VF_STATS_TX_BYTES, + IFLA_VF_STATS_BROADCAST, + IFLA_VF_STATS_MULTICAST, + IFLA_VF_STATS_PAD, + IFLA_VF_STATS_RX_DROPPED, + IFLA_VF_STATS_TX_DROPPED, + __IFLA_VF_STATS_MAX, +}; + +#define IFLA_VF_STATS_MAX (__IFLA_VF_STATS_MAX - 1) + +struct ifla_vf_trust { + __u32 vf; + __u32 setting; +}; + +/* VF ports management section + * + * Nested layout of set/get msg is: + * + * [IFLA_NUM_VF] + * [IFLA_VF_PORTS] + * [IFLA_VF_PORT] + * [IFLA_PORT_*], ... + * [IFLA_VF_PORT] + * [IFLA_PORT_*], ... + * ... + * [IFLA_PORT_SELF] + * [IFLA_PORT_*], ... + */ + +enum { + IFLA_VF_PORT_UNSPEC, + IFLA_VF_PORT, /* nest */ + __IFLA_VF_PORT_MAX, +}; + +#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1) + +enum { + IFLA_PORT_UNSPEC, + IFLA_PORT_VF, /* __u32 */ + IFLA_PORT_PROFILE, /* string */ + IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */ + IFLA_PORT_INSTANCE_UUID, /* binary UUID */ + IFLA_PORT_HOST_UUID, /* binary UUID */ + IFLA_PORT_REQUEST, /* __u8 */ + IFLA_PORT_RESPONSE, /* __u16, output only */ + __IFLA_PORT_MAX, +}; + +#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1) + +#define PORT_PROFILE_MAX 40 +#define PORT_UUID_MAX 16 +#define PORT_SELF_VF -1 + +enum { + PORT_REQUEST_PREASSOCIATE = 0, + PORT_REQUEST_PREASSOCIATE_RR, + PORT_REQUEST_ASSOCIATE, + PORT_REQUEST_DISASSOCIATE, +}; + +enum { + PORT_VDP_RESPONSE_SUCCESS = 0, + PORT_VDP_RESPONSE_INVALID_FORMAT, + PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES, + PORT_VDP_RESPONSE_UNUSED_VTID, + PORT_VDP_RESPONSE_VTID_VIOLATION, + PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION, + PORT_VDP_RESPONSE_OUT_OF_SYNC, + /* 0x08-0xFF reserved for future VDP use */ + PORT_PROFILE_RESPONSE_SUCCESS = 0x100, + PORT_PROFILE_RESPONSE_INPROGRESS, + PORT_PROFILE_RESPONSE_INVALID, + PORT_PROFILE_RESPONSE_BADSTATE, + PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES, + PORT_PROFILE_RESPONSE_ERROR, +}; + +struct ifla_port_vsi { + __u8 vsi_mgr_id; + __u8 vsi_type_id[3]; + __u8 vsi_type_version; + __u8 pad[3]; +}; + + +/* IPoIB section */ + +enum { + IFLA_IPOIB_UNSPEC, + IFLA_IPOIB_PKEY, + IFLA_IPOIB_MODE, + IFLA_IPOIB_UMCAST, + __IFLA_IPOIB_MAX +}; + +enum { + IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */ + IPOIB_MODE_CONNECTED = 1, /* using connected QPs */ +}; + +#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) + + +/* HSR/PRP section, both uses same interface */ + +/* Different redundancy protocols for hsr device */ +enum { + HSR_PROTOCOL_HSR, + HSR_PROTOCOL_PRP, + HSR_PROTOCOL_MAX, +}; + +enum { + IFLA_HSR_UNSPEC, + IFLA_HSR_SLAVE1, + IFLA_HSR_SLAVE2, + IFLA_HSR_MULTICAST_SPEC, /* Last byte of supervision addr */ + IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */ + IFLA_HSR_SEQ_NR, + IFLA_HSR_VERSION, /* HSR version */ + IFLA_HSR_PROTOCOL, /* Indicate different protocol than + * HSR. For example PRP. + */ + __IFLA_HSR_MAX, +}; + +#define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1) + +/* STATS section */ + +struct if_stats_msg { + __u8 family; + __u8 pad1; + __u16 pad2; + __u32 ifindex; + __u32 filter_mask; +}; + +/* A stats attribute can be netdev specific or a global stat. + * For netdev stats, lets use the prefix IFLA_STATS_LINK_* + */ +enum { + IFLA_STATS_UNSPEC, /* also used as 64bit pad attribute */ + IFLA_STATS_LINK_64, + IFLA_STATS_LINK_XSTATS, + IFLA_STATS_LINK_XSTATS_SLAVE, + IFLA_STATS_LINK_OFFLOAD_XSTATS, + IFLA_STATS_AF_SPEC, + __IFLA_STATS_MAX, +}; + +#define IFLA_STATS_MAX (__IFLA_STATS_MAX - 1) + +#define IFLA_STATS_FILTER_BIT(ATTR) (1 << (ATTR - 1)) + +enum { + IFLA_STATS_GETSET_UNSPEC, + IFLA_STATS_GET_FILTERS, /* Nest of IFLA_STATS_LINK_xxx, each a u32 with + * a filter mask for the corresponding group. + */ + IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS, /* 0 or 1 as u8 */ + __IFLA_STATS_GETSET_MAX, +}; + +#define IFLA_STATS_GETSET_MAX (__IFLA_STATS_GETSET_MAX - 1) + +/* These are embedded into IFLA_STATS_LINK_XSTATS: + * [IFLA_STATS_LINK_XSTATS] + * -> [LINK_XSTATS_TYPE_xxx] + * -> [rtnl link type specific attributes] + */ +enum { + LINK_XSTATS_TYPE_UNSPEC, + LINK_XSTATS_TYPE_BRIDGE, + LINK_XSTATS_TYPE_BOND, + __LINK_XSTATS_TYPE_MAX +}; +#define LINK_XSTATS_TYPE_MAX (__LINK_XSTATS_TYPE_MAX - 1) + +/* These are stats embedded into IFLA_STATS_LINK_OFFLOAD_XSTATS */ +enum { + IFLA_OFFLOAD_XSTATS_UNSPEC, + IFLA_OFFLOAD_XSTATS_CPU_HIT, /* struct rtnl_link_stats64 */ + IFLA_OFFLOAD_XSTATS_HW_S_INFO, /* HW stats info. A nest */ + IFLA_OFFLOAD_XSTATS_L3_STATS, /* struct rtnl_hw_stats64 */ + __IFLA_OFFLOAD_XSTATS_MAX +}; +#define IFLA_OFFLOAD_XSTATS_MAX (__IFLA_OFFLOAD_XSTATS_MAX - 1) + +enum { + IFLA_OFFLOAD_XSTATS_HW_S_INFO_UNSPEC, + IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST, /* u8 */ + IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED, /* u8 */ + __IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX, +}; +#define IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX \ + (__IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX - 1) + +/* XDP section */ + +#define XDP_FLAGS_UPDATE_IF_NOEXIST (1U << 0) +#define XDP_FLAGS_SKB_MODE (1U << 1) +#define XDP_FLAGS_DRV_MODE (1U << 2) +#define XDP_FLAGS_HW_MODE (1U << 3) +#define XDP_FLAGS_REPLACE (1U << 4) +#define XDP_FLAGS_MODES (XDP_FLAGS_SKB_MODE | \ + XDP_FLAGS_DRV_MODE | \ + XDP_FLAGS_HW_MODE) +#define XDP_FLAGS_MASK (XDP_FLAGS_UPDATE_IF_NOEXIST | \ + XDP_FLAGS_MODES | XDP_FLAGS_REPLACE) + +/* These are stored into IFLA_XDP_ATTACHED on dump. */ +enum { + XDP_ATTACHED_NONE = 0, + XDP_ATTACHED_DRV, + XDP_ATTACHED_SKB, + XDP_ATTACHED_HW, + XDP_ATTACHED_MULTI, +}; + +enum { + IFLA_XDP_UNSPEC, + IFLA_XDP_FD, + IFLA_XDP_ATTACHED, + IFLA_XDP_FLAGS, + IFLA_XDP_PROG_ID, + IFLA_XDP_DRV_PROG_ID, + IFLA_XDP_SKB_PROG_ID, + IFLA_XDP_HW_PROG_ID, + IFLA_XDP_EXPECTED_FD, + __IFLA_XDP_MAX, +}; + +#define IFLA_XDP_MAX (__IFLA_XDP_MAX - 1) + +enum { + IFLA_EVENT_NONE, + IFLA_EVENT_REBOOT, /* internal reset / reboot */ + IFLA_EVENT_FEATURES, /* change in offload features */ + IFLA_EVENT_BONDING_FAILOVER, /* change in active slave */ + IFLA_EVENT_NOTIFY_PEERS, /* re-sent grat. arp/ndisc */ + IFLA_EVENT_IGMP_RESEND, /* re-sent IGMP JOIN */ + IFLA_EVENT_BONDING_OPTIONS, /* change in bonding options */ +}; + +/* tun section */ + +enum { + IFLA_TUN_UNSPEC, + IFLA_TUN_OWNER, + IFLA_TUN_GROUP, + IFLA_TUN_TYPE, + IFLA_TUN_PI, + IFLA_TUN_VNET_HDR, + IFLA_TUN_PERSIST, + IFLA_TUN_MULTI_QUEUE, + IFLA_TUN_NUM_QUEUES, + IFLA_TUN_NUM_DISABLED_QUEUES, + __IFLA_TUN_MAX, +}; + +#define IFLA_TUN_MAX (__IFLA_TUN_MAX - 1) + +/* rmnet section */ + +#define RMNET_FLAGS_INGRESS_DEAGGREGATION (1U << 0) +#define RMNET_FLAGS_INGRESS_MAP_COMMANDS (1U << 1) +#define RMNET_FLAGS_INGRESS_MAP_CKSUMV4 (1U << 2) +#define RMNET_FLAGS_EGRESS_MAP_CKSUMV4 (1U << 3) +#define RMNET_FLAGS_INGRESS_MAP_CKSUMV5 (1U << 4) +#define RMNET_FLAGS_EGRESS_MAP_CKSUMV5 (1U << 5) + +enum { + IFLA_RMNET_UNSPEC, + IFLA_RMNET_MUX_ID, + IFLA_RMNET_FLAGS, + __IFLA_RMNET_MAX, +}; + +#define IFLA_RMNET_MAX (__IFLA_RMNET_MAX - 1) + +struct ifla_rmnet_flags { + __u32 flags; + __u32 mask; +}; + +/* MCTP section */ + +enum { + IFLA_MCTP_UNSPEC, + IFLA_MCTP_NET, + __IFLA_MCTP_MAX, +}; + +#define IFLA_MCTP_MAX (__IFLA_MCTP_MAX - 1) + +/* DSA section */ + +enum { + IFLA_DSA_UNSPEC, + IFLA_DSA_MASTER, + __IFLA_DSA_MAX, +}; + +#define IFLA_DSA_MAX (__IFLA_DSA_MAX - 1) + +#endif /* _UAPI_LINUX_IF_LINK_H */ diff --git a/src/basic/linux/if_macsec.h b/src/basic/linux/if_macsec.h new file mode 100644 index 0000000..d5b6d1f --- /dev/null +++ b/src/basic/linux/if_macsec.h @@ -0,0 +1,194 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * include/uapi/linux/if_macsec.h - MACsec device + * + * Copyright (c) 2015 Sabrina Dubroca <sd@queasysnail.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _UAPI_MACSEC_H +#define _UAPI_MACSEC_H + +#include <linux/types.h> + +#define MACSEC_GENL_NAME "macsec" +#define MACSEC_GENL_VERSION 1 + +#define MACSEC_MAX_KEY_LEN 128 + +#define MACSEC_KEYID_LEN 16 + +#define MACSEC_SALT_LEN 12 + +/* cipher IDs as per IEEE802.1AE-2018 (Table 14-1) */ +#define MACSEC_CIPHER_ID_GCM_AES_128 0x0080C20001000001ULL +#define MACSEC_CIPHER_ID_GCM_AES_256 0x0080C20001000002ULL +#define MACSEC_CIPHER_ID_GCM_AES_XPN_128 0x0080C20001000003ULL +#define MACSEC_CIPHER_ID_GCM_AES_XPN_256 0x0080C20001000004ULL + +/* deprecated cipher ID for GCM-AES-128 */ +#define MACSEC_DEFAULT_CIPHER_ID 0x0080020001000001ULL +#define MACSEC_DEFAULT_CIPHER_ALT MACSEC_CIPHER_ID_GCM_AES_128 + +#define MACSEC_MIN_ICV_LEN 8 +#define MACSEC_MAX_ICV_LEN 32 +/* upper limit for ICV length as recommended by IEEE802.1AE-2006 */ +#define MACSEC_STD_ICV_LEN 16 + +enum macsec_attrs { + MACSEC_ATTR_UNSPEC, + MACSEC_ATTR_IFINDEX, /* u32, ifindex of the MACsec netdevice */ + MACSEC_ATTR_RXSC_CONFIG, /* config, nested macsec_rxsc_attrs */ + MACSEC_ATTR_SA_CONFIG, /* config, nested macsec_sa_attrs */ + MACSEC_ATTR_SECY, /* dump, nested macsec_secy_attrs */ + MACSEC_ATTR_TXSA_LIST, /* dump, nested, macsec_sa_attrs for each TXSA */ + MACSEC_ATTR_RXSC_LIST, /* dump, nested, macsec_rxsc_attrs for each RXSC */ + MACSEC_ATTR_TXSC_STATS, /* dump, nested, macsec_txsc_stats_attr */ + MACSEC_ATTR_SECY_STATS, /* dump, nested, macsec_secy_stats_attr */ + MACSEC_ATTR_OFFLOAD, /* config, nested, macsec_offload_attrs */ + __MACSEC_ATTR_END, + NUM_MACSEC_ATTR = __MACSEC_ATTR_END, + MACSEC_ATTR_MAX = __MACSEC_ATTR_END - 1, +}; + +enum macsec_secy_attrs { + MACSEC_SECY_ATTR_UNSPEC, + MACSEC_SECY_ATTR_SCI, + MACSEC_SECY_ATTR_ENCODING_SA, + MACSEC_SECY_ATTR_WINDOW, + MACSEC_SECY_ATTR_CIPHER_SUITE, + MACSEC_SECY_ATTR_ICV_LEN, + MACSEC_SECY_ATTR_PROTECT, + MACSEC_SECY_ATTR_REPLAY, + MACSEC_SECY_ATTR_OPER, + MACSEC_SECY_ATTR_VALIDATE, + MACSEC_SECY_ATTR_ENCRYPT, + MACSEC_SECY_ATTR_INC_SCI, + MACSEC_SECY_ATTR_ES, + MACSEC_SECY_ATTR_SCB, + MACSEC_SECY_ATTR_PAD, + __MACSEC_SECY_ATTR_END, + NUM_MACSEC_SECY_ATTR = __MACSEC_SECY_ATTR_END, + MACSEC_SECY_ATTR_MAX = __MACSEC_SECY_ATTR_END - 1, +}; + +enum macsec_rxsc_attrs { + MACSEC_RXSC_ATTR_UNSPEC, + MACSEC_RXSC_ATTR_SCI, /* config/dump, u64 */ + MACSEC_RXSC_ATTR_ACTIVE, /* config/dump, u8 0..1 */ + MACSEC_RXSC_ATTR_SA_LIST, /* dump, nested */ + MACSEC_RXSC_ATTR_STATS, /* dump, nested, macsec_rxsc_stats_attr */ + MACSEC_RXSC_ATTR_PAD, + __MACSEC_RXSC_ATTR_END, + NUM_MACSEC_RXSC_ATTR = __MACSEC_RXSC_ATTR_END, + MACSEC_RXSC_ATTR_MAX = __MACSEC_RXSC_ATTR_END - 1, +}; + +enum macsec_sa_attrs { + MACSEC_SA_ATTR_UNSPEC, + MACSEC_SA_ATTR_AN, /* config/dump, u8 0..3 */ + MACSEC_SA_ATTR_ACTIVE, /* config/dump, u8 0..1 */ + MACSEC_SA_ATTR_PN, /* config/dump, u32/u64 (u64 if XPN) */ + MACSEC_SA_ATTR_KEY, /* config, data */ + MACSEC_SA_ATTR_KEYID, /* config/dump, 128-bit */ + MACSEC_SA_ATTR_STATS, /* dump, nested, macsec_sa_stats_attr */ + MACSEC_SA_ATTR_PAD, + MACSEC_SA_ATTR_SSCI, /* config/dump, u32 - XPN only */ + MACSEC_SA_ATTR_SALT, /* config, 96-bit - XPN only */ + __MACSEC_SA_ATTR_END, + NUM_MACSEC_SA_ATTR = __MACSEC_SA_ATTR_END, + MACSEC_SA_ATTR_MAX = __MACSEC_SA_ATTR_END - 1, +}; + +enum macsec_offload_attrs { + MACSEC_OFFLOAD_ATTR_UNSPEC, + MACSEC_OFFLOAD_ATTR_TYPE, /* config/dump, u8 0..2 */ + MACSEC_OFFLOAD_ATTR_PAD, + __MACSEC_OFFLOAD_ATTR_END, + NUM_MACSEC_OFFLOAD_ATTR = __MACSEC_OFFLOAD_ATTR_END, + MACSEC_OFFLOAD_ATTR_MAX = __MACSEC_OFFLOAD_ATTR_END - 1, +}; + +enum macsec_nl_commands { + MACSEC_CMD_GET_TXSC, + MACSEC_CMD_ADD_RXSC, + MACSEC_CMD_DEL_RXSC, + MACSEC_CMD_UPD_RXSC, + MACSEC_CMD_ADD_TXSA, + MACSEC_CMD_DEL_TXSA, + MACSEC_CMD_UPD_TXSA, + MACSEC_CMD_ADD_RXSA, + MACSEC_CMD_DEL_RXSA, + MACSEC_CMD_UPD_RXSA, + MACSEC_CMD_UPD_OFFLOAD, +}; + +/* u64 per-RXSC stats */ +enum macsec_rxsc_stats_attr { + MACSEC_RXSC_STATS_ATTR_UNSPEC, + MACSEC_RXSC_STATS_ATTR_IN_OCTETS_VALIDATED, + MACSEC_RXSC_STATS_ATTR_IN_OCTETS_DECRYPTED, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_UNCHECKED, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_DELAYED, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_OK, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_INVALID, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_LATE, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_NOT_VALID, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_NOT_USING_SA, + MACSEC_RXSC_STATS_ATTR_IN_PKTS_UNUSED_SA, + MACSEC_RXSC_STATS_ATTR_PAD, + __MACSEC_RXSC_STATS_ATTR_END, + NUM_MACSEC_RXSC_STATS_ATTR = __MACSEC_RXSC_STATS_ATTR_END, + MACSEC_RXSC_STATS_ATTR_MAX = __MACSEC_RXSC_STATS_ATTR_END - 1, +}; + +/* u32 per-{RX,TX}SA stats */ +enum macsec_sa_stats_attr { + MACSEC_SA_STATS_ATTR_UNSPEC, + MACSEC_SA_STATS_ATTR_IN_PKTS_OK, + MACSEC_SA_STATS_ATTR_IN_PKTS_INVALID, + MACSEC_SA_STATS_ATTR_IN_PKTS_NOT_VALID, + MACSEC_SA_STATS_ATTR_IN_PKTS_NOT_USING_SA, + MACSEC_SA_STATS_ATTR_IN_PKTS_UNUSED_SA, + MACSEC_SA_STATS_ATTR_OUT_PKTS_PROTECTED, + MACSEC_SA_STATS_ATTR_OUT_PKTS_ENCRYPTED, + __MACSEC_SA_STATS_ATTR_END, + NUM_MACSEC_SA_STATS_ATTR = __MACSEC_SA_STATS_ATTR_END, + MACSEC_SA_STATS_ATTR_MAX = __MACSEC_SA_STATS_ATTR_END - 1, +}; + +/* u64 per-TXSC stats */ +enum macsec_txsc_stats_attr { + MACSEC_TXSC_STATS_ATTR_UNSPEC, + MACSEC_TXSC_STATS_ATTR_OUT_PKTS_PROTECTED, + MACSEC_TXSC_STATS_ATTR_OUT_PKTS_ENCRYPTED, + MACSEC_TXSC_STATS_ATTR_OUT_OCTETS_PROTECTED, + MACSEC_TXSC_STATS_ATTR_OUT_OCTETS_ENCRYPTED, + MACSEC_TXSC_STATS_ATTR_PAD, + __MACSEC_TXSC_STATS_ATTR_END, + NUM_MACSEC_TXSC_STATS_ATTR = __MACSEC_TXSC_STATS_ATTR_END, + MACSEC_TXSC_STATS_ATTR_MAX = __MACSEC_TXSC_STATS_ATTR_END - 1, +}; + +/* u64 per-SecY stats */ +enum macsec_secy_stats_attr { + MACSEC_SECY_STATS_ATTR_UNSPEC, + MACSEC_SECY_STATS_ATTR_OUT_PKTS_UNTAGGED, + MACSEC_SECY_STATS_ATTR_IN_PKTS_UNTAGGED, + MACSEC_SECY_STATS_ATTR_OUT_PKTS_TOO_LONG, + MACSEC_SECY_STATS_ATTR_IN_PKTS_NO_TAG, + MACSEC_SECY_STATS_ATTR_IN_PKTS_BAD_TAG, + MACSEC_SECY_STATS_ATTR_IN_PKTS_UNKNOWN_SCI, + MACSEC_SECY_STATS_ATTR_IN_PKTS_NO_SCI, + MACSEC_SECY_STATS_ATTR_IN_PKTS_OVERRUN, + MACSEC_SECY_STATS_ATTR_PAD, + __MACSEC_SECY_STATS_ATTR_END, + NUM_MACSEC_SECY_STATS_ATTR = __MACSEC_SECY_STATS_ATTR_END, + MACSEC_SECY_STATS_ATTR_MAX = __MACSEC_SECY_STATS_ATTR_END - 1, +}; + +#endif /* _UAPI_MACSEC_H */ diff --git a/src/basic/linux/if_tun.h b/src/basic/linux/if_tun.h new file mode 100644 index 0000000..287cdc8 --- /dev/null +++ b/src/basic/linux/if_tun.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Universal TUN/TAP device driver. + * Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UAPI__IF_TUN_H +#define _UAPI__IF_TUN_H + +#include <linux/types.h> +#include <linux/if_ether.h> +#include <linux/filter.h> + +/* Read queue size */ +#define TUN_READQ_SIZE 500 +/* TUN device type flags: deprecated. Use IFF_TUN/IFF_TAP instead. */ +#define TUN_TUN_DEV IFF_TUN +#define TUN_TAP_DEV IFF_TAP +#define TUN_TYPE_MASK 0x000f + +/* Ioctl defines */ +#define TUNSETNOCSUM _IOW('T', 200, int) +#define TUNSETDEBUG _IOW('T', 201, int) +#define TUNSETIFF _IOW('T', 202, int) +#define TUNSETPERSIST _IOW('T', 203, int) +#define TUNSETOWNER _IOW('T', 204, int) +#define TUNSETLINK _IOW('T', 205, int) +#define TUNSETGROUP _IOW('T', 206, int) +#define TUNGETFEATURES _IOR('T', 207, unsigned int) +#define TUNSETOFFLOAD _IOW('T', 208, unsigned int) +#define TUNSETTXFILTER _IOW('T', 209, unsigned int) +#define TUNGETIFF _IOR('T', 210, unsigned int) +#define TUNGETSNDBUF _IOR('T', 211, int) +#define TUNSETSNDBUF _IOW('T', 212, int) +#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog) +#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) +#define TUNGETVNETHDRSZ _IOR('T', 215, int) +#define TUNSETVNETHDRSZ _IOW('T', 216, int) +#define TUNSETQUEUE _IOW('T', 217, int) +#define TUNSETIFINDEX _IOW('T', 218, unsigned int) +#define TUNGETFILTER _IOR('T', 219, struct sock_fprog) +#define TUNSETVNETLE _IOW('T', 220, int) +#define TUNGETVNETLE _IOR('T', 221, int) +/* The TUNSETVNETBE and TUNGETVNETBE ioctls are for cross-endian support on + * little-endian hosts. Not all kernel configurations support them, but all + * configurations that support SET also support GET. + */ +#define TUNSETVNETBE _IOW('T', 222, int) +#define TUNGETVNETBE _IOR('T', 223, int) +#define TUNSETSTEERINGEBPF _IOR('T', 224, int) +#define TUNSETFILTEREBPF _IOR('T', 225, int) +#define TUNSETCARRIER _IOW('T', 226, int) +#define TUNGETDEVNETNS _IO('T', 227) + +/* TUNSETIFF ifr flags */ +#define IFF_TUN 0x0001 +#define IFF_TAP 0x0002 +#define IFF_NAPI 0x0010 +#define IFF_NAPI_FRAGS 0x0020 +/* Used in TUNSETIFF to bring up tun/tap without carrier */ +#define IFF_NO_CARRIER 0x0040 +#define IFF_NO_PI 0x1000 +/* This flag has no real effect */ +#define IFF_ONE_QUEUE 0x2000 +#define IFF_VNET_HDR 0x4000 +#define IFF_TUN_EXCL 0x8000 +#define IFF_MULTI_QUEUE 0x0100 +#define IFF_ATTACH_QUEUE 0x0200 +#define IFF_DETACH_QUEUE 0x0400 +/* read-only flag */ +#define IFF_PERSIST 0x0800 +#define IFF_NOFILTER 0x1000 + +/* Socket options */ +#define TUN_TX_TIMESTAMP 1 + +/* Features for GSO (TUNSETOFFLOAD). */ +#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ +#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ +#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ +#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ +#define TUN_F_UFO 0x10 /* I can handle UFO packets */ +#define TUN_F_USO4 0x20 /* I can handle USO for IPv4 packets */ +#define TUN_F_USO6 0x40 /* I can handle USO for IPv6 packets */ + +/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ +#define TUN_PKT_STRIP 0x0001 +struct tun_pi { + __u16 flags; + __be16 proto; +}; + +/* + * Filter spec (used for SETXXFILTER ioctls) + * This stuff is applicable only to the TAP (Ethernet) devices. + * If the count is zero the filter is disabled and the driver accepts + * all packets (promisc mode). + * If the filter is enabled in order to accept broadcast packets + * broadcast addr must be explicitly included in the addr list. + */ +#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */ +struct tun_filter { + __u16 flags; /* TUN_FLT_ flags see above */ + __u16 count; /* Number of addresses */ + __u8 addr[][ETH_ALEN]; +}; + +#endif /* _UAPI__IF_TUN_H */ diff --git a/src/basic/linux/if_tunnel.h b/src/basic/linux/if_tunnel.h new file mode 100644 index 0000000..1021196 --- /dev/null +++ b/src/basic/linux/if_tunnel.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_IF_TUNNEL_H_ +#define _UAPI_IF_TUNNEL_H_ + +#include <linux/types.h> +#include <linux/if.h> +#include <linux/ip.h> +#include <linux/in6.h> +#include <asm/byteorder.h> + + +#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0) +#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1) +#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2) +#define SIOCCHGTUNNEL (SIOCDEVPRIVATE + 3) +#define SIOCGETPRL (SIOCDEVPRIVATE + 4) +#define SIOCADDPRL (SIOCDEVPRIVATE + 5) +#define SIOCDELPRL (SIOCDEVPRIVATE + 6) +#define SIOCCHGPRL (SIOCDEVPRIVATE + 7) +#define SIOCGET6RD (SIOCDEVPRIVATE + 8) +#define SIOCADD6RD (SIOCDEVPRIVATE + 9) +#define SIOCDEL6RD (SIOCDEVPRIVATE + 10) +#define SIOCCHG6RD (SIOCDEVPRIVATE + 11) + +#define GRE_CSUM __cpu_to_be16(0x8000) +#define GRE_ROUTING __cpu_to_be16(0x4000) +#define GRE_KEY __cpu_to_be16(0x2000) +#define GRE_SEQ __cpu_to_be16(0x1000) +#define GRE_STRICT __cpu_to_be16(0x0800) +#define GRE_REC __cpu_to_be16(0x0700) +#define GRE_ACK __cpu_to_be16(0x0080) +#define GRE_FLAGS __cpu_to_be16(0x0078) +#define GRE_VERSION __cpu_to_be16(0x0007) + +#define GRE_IS_CSUM(f) ((f) & GRE_CSUM) +#define GRE_IS_ROUTING(f) ((f) & GRE_ROUTING) +#define GRE_IS_KEY(f) ((f) & GRE_KEY) +#define GRE_IS_SEQ(f) ((f) & GRE_SEQ) +#define GRE_IS_STRICT(f) ((f) & GRE_STRICT) +#define GRE_IS_REC(f) ((f) & GRE_REC) +#define GRE_IS_ACK(f) ((f) & GRE_ACK) + +#define GRE_VERSION_0 __cpu_to_be16(0x0000) +#define GRE_VERSION_1 __cpu_to_be16(0x0001) +#define GRE_PROTO_PPP __cpu_to_be16(0x880b) +#define GRE_PPTP_KEY_MASK __cpu_to_be32(0xffff) + +struct ip_tunnel_parm { + char name[IFNAMSIZ]; + int link; + __be16 i_flags; + __be16 o_flags; + __be32 i_key; + __be32 o_key; + struct iphdr iph; +}; + +enum { + IFLA_IPTUN_UNSPEC, + IFLA_IPTUN_LINK, + IFLA_IPTUN_LOCAL, + IFLA_IPTUN_REMOTE, + IFLA_IPTUN_TTL, + IFLA_IPTUN_TOS, + IFLA_IPTUN_ENCAP_LIMIT, + IFLA_IPTUN_FLOWINFO, + IFLA_IPTUN_FLAGS, + IFLA_IPTUN_PROTO, + IFLA_IPTUN_PMTUDISC, + IFLA_IPTUN_6RD_PREFIX, + IFLA_IPTUN_6RD_RELAY_PREFIX, + IFLA_IPTUN_6RD_PREFIXLEN, + IFLA_IPTUN_6RD_RELAY_PREFIXLEN, + IFLA_IPTUN_ENCAP_TYPE, + IFLA_IPTUN_ENCAP_FLAGS, + IFLA_IPTUN_ENCAP_SPORT, + IFLA_IPTUN_ENCAP_DPORT, + IFLA_IPTUN_COLLECT_METADATA, + IFLA_IPTUN_FWMARK, + __IFLA_IPTUN_MAX, +}; +#define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1) + +enum tunnel_encap_types { + TUNNEL_ENCAP_NONE, + TUNNEL_ENCAP_FOU, + TUNNEL_ENCAP_GUE, + TUNNEL_ENCAP_MPLS, +}; + +#define TUNNEL_ENCAP_FLAG_CSUM (1<<0) +#define TUNNEL_ENCAP_FLAG_CSUM6 (1<<1) +#define TUNNEL_ENCAP_FLAG_REMCSUM (1<<2) + +/* SIT-mode i_flags */ +#define SIT_ISATAP 0x0001 + +struct ip_tunnel_prl { + __be32 addr; + __u16 flags; + __u16 __reserved; + __u32 datalen; + __u32 __reserved2; + /* data follows */ +}; + +/* PRL flags */ +#define PRL_DEFAULT 0x0001 + +struct ip_tunnel_6rd { + struct in6_addr prefix; + __be32 relay_prefix; + __u16 prefixlen; + __u16 relay_prefixlen; +}; + +enum { + IFLA_GRE_UNSPEC, + IFLA_GRE_LINK, + IFLA_GRE_IFLAGS, + IFLA_GRE_OFLAGS, + IFLA_GRE_IKEY, + IFLA_GRE_OKEY, + IFLA_GRE_LOCAL, + IFLA_GRE_REMOTE, + IFLA_GRE_TTL, + IFLA_GRE_TOS, + IFLA_GRE_PMTUDISC, + IFLA_GRE_ENCAP_LIMIT, + IFLA_GRE_FLOWINFO, + IFLA_GRE_FLAGS, + IFLA_GRE_ENCAP_TYPE, + IFLA_GRE_ENCAP_FLAGS, + IFLA_GRE_ENCAP_SPORT, + IFLA_GRE_ENCAP_DPORT, + IFLA_GRE_COLLECT_METADATA, + IFLA_GRE_IGNORE_DF, + IFLA_GRE_FWMARK, + IFLA_GRE_ERSPAN_INDEX, + IFLA_GRE_ERSPAN_VER, + IFLA_GRE_ERSPAN_DIR, + IFLA_GRE_ERSPAN_HWID, + __IFLA_GRE_MAX, +}; + +#define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) + +/* VTI-mode i_flags */ +#define VTI_ISVTI ((__force __be16)0x0001) + +enum { + IFLA_VTI_UNSPEC, + IFLA_VTI_LINK, + IFLA_VTI_IKEY, + IFLA_VTI_OKEY, + IFLA_VTI_LOCAL, + IFLA_VTI_REMOTE, + IFLA_VTI_FWMARK, + __IFLA_VTI_MAX, +}; + +#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) + +#define TUNNEL_CSUM __cpu_to_be16(0x01) +#define TUNNEL_ROUTING __cpu_to_be16(0x02) +#define TUNNEL_KEY __cpu_to_be16(0x04) +#define TUNNEL_SEQ __cpu_to_be16(0x08) +#define TUNNEL_STRICT __cpu_to_be16(0x10) +#define TUNNEL_REC __cpu_to_be16(0x20) +#define TUNNEL_VERSION __cpu_to_be16(0x40) +#define TUNNEL_NO_KEY __cpu_to_be16(0x80) +#define TUNNEL_DONT_FRAGMENT __cpu_to_be16(0x0100) +#define TUNNEL_OAM __cpu_to_be16(0x0200) +#define TUNNEL_CRIT_OPT __cpu_to_be16(0x0400) +#define TUNNEL_GENEVE_OPT __cpu_to_be16(0x0800) +#define TUNNEL_VXLAN_OPT __cpu_to_be16(0x1000) +#define TUNNEL_NOCACHE __cpu_to_be16(0x2000) +#define TUNNEL_ERSPAN_OPT __cpu_to_be16(0x4000) +#define TUNNEL_GTP_OPT __cpu_to_be16(0x8000) + +#define TUNNEL_OPTIONS_PRESENT \ + (TUNNEL_GENEVE_OPT | TUNNEL_VXLAN_OPT | TUNNEL_ERSPAN_OPT | \ + TUNNEL_GTP_OPT) + +#endif /* _UAPI_IF_TUNNEL_H_ */ diff --git a/src/basic/linux/in.h b/src/basic/linux/in.h new file mode 100644 index 0000000..07a4cb1 --- /dev/null +++ b/src/basic/linux/in.h @@ -0,0 +1,331 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions of the Internet Protocol. + * + * Version: @(#)in.h 1.0.1 04/21/93 + * + * Authors: Original taken from the GNU Project <netinet/in.h> file. + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_IN_H +#define _UAPI_LINUX_IN_H + +#include <linux/types.h> +#include <linux/stddef.h> +#include <linux/libc-compat.h> +#include <linux/socket.h> + +#if __UAPI_DEF_IN_IPPROTO +/* Standard well-defined IP protocols. */ +enum { + IPPROTO_IP = 0, /* Dummy protocol for TCP */ +#define IPPROTO_IP IPPROTO_IP + IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ +#define IPPROTO_ICMP IPPROTO_ICMP + IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ +#define IPPROTO_IGMP IPPROTO_IGMP + IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ +#define IPPROTO_IPIP IPPROTO_IPIP + IPPROTO_TCP = 6, /* Transmission Control Protocol */ +#define IPPROTO_TCP IPPROTO_TCP + IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ +#define IPPROTO_EGP IPPROTO_EGP + IPPROTO_PUP = 12, /* PUP protocol */ +#define IPPROTO_PUP IPPROTO_PUP + IPPROTO_UDP = 17, /* User Datagram Protocol */ +#define IPPROTO_UDP IPPROTO_UDP + IPPROTO_IDP = 22, /* XNS IDP protocol */ +#define IPPROTO_IDP IPPROTO_IDP + IPPROTO_TP = 29, /* SO Transport Protocol Class 4 */ +#define IPPROTO_TP IPPROTO_TP + IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ +#define IPPROTO_DCCP IPPROTO_DCCP + IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ +#define IPPROTO_IPV6 IPPROTO_IPV6 + IPPROTO_RSVP = 46, /* RSVP Protocol */ +#define IPPROTO_RSVP IPPROTO_RSVP + IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ +#define IPPROTO_GRE IPPROTO_GRE + IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ +#define IPPROTO_ESP IPPROTO_ESP + IPPROTO_AH = 51, /* Authentication Header protocol */ +#define IPPROTO_AH IPPROTO_AH + IPPROTO_MTP = 92, /* Multicast Transport Protocol */ +#define IPPROTO_MTP IPPROTO_MTP + IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ +#define IPPROTO_BEETPH IPPROTO_BEETPH + IPPROTO_ENCAP = 98, /* Encapsulation Header */ +#define IPPROTO_ENCAP IPPROTO_ENCAP + IPPROTO_PIM = 103, /* Protocol Independent Multicast */ +#define IPPROTO_PIM IPPROTO_PIM + IPPROTO_COMP = 108, /* Compression Header Protocol */ +#define IPPROTO_COMP IPPROTO_COMP + IPPROTO_L2TP = 115, /* Layer 2 Tunnelling Protocol */ +#define IPPROTO_L2TP IPPROTO_L2TP + IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ +#define IPPROTO_SCTP IPPROTO_SCTP + IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ +#define IPPROTO_UDPLITE IPPROTO_UDPLITE + IPPROTO_MPLS = 137, /* MPLS in IP (RFC 4023) */ +#define IPPROTO_MPLS IPPROTO_MPLS + IPPROTO_ETHERNET = 143, /* Ethernet-within-IPv6 Encapsulation */ +#define IPPROTO_ETHERNET IPPROTO_ETHERNET + IPPROTO_RAW = 255, /* Raw IP packets */ +#define IPPROTO_RAW IPPROTO_RAW + IPPROTO_MPTCP = 262, /* Multipath TCP connection */ +#define IPPROTO_MPTCP IPPROTO_MPTCP + IPPROTO_MAX +}; +#endif + +#if __UAPI_DEF_IN_ADDR +/* Internet address. */ +struct in_addr { + __be32 s_addr; +}; +#endif + +#define IP_TOS 1 +#define IP_TTL 2 +#define IP_HDRINCL 3 +#define IP_OPTIONS 4 +#define IP_ROUTER_ALERT 5 +#define IP_RECVOPTS 6 +#define IP_RETOPTS 7 +#define IP_PKTINFO 8 +#define IP_PKTOPTIONS 9 +#define IP_MTU_DISCOVER 10 +#define IP_RECVERR 11 +#define IP_RECVTTL 12 +#define IP_RECVTOS 13 +#define IP_MTU 14 +#define IP_FREEBIND 15 +#define IP_IPSEC_POLICY 16 +#define IP_XFRM_POLICY 17 +#define IP_PASSSEC 18 +#define IP_TRANSPARENT 19 + +/* BSD compatibility */ +#define IP_RECVRETOPTS IP_RETOPTS + +/* TProxy original addresses */ +#define IP_ORIGDSTADDR 20 +#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR + +#define IP_MINTTL 21 +#define IP_NODEFRAG 22 +#define IP_CHECKSUM 23 +#define IP_BIND_ADDRESS_NO_PORT 24 +#define IP_RECVFRAGSIZE 25 +#define IP_RECVERR_RFC4884 26 + +/* IP_MTU_DISCOVER values */ +#define IP_PMTUDISC_DONT 0 /* Never send DF frames */ +#define IP_PMTUDISC_WANT 1 /* Use per route hints */ +#define IP_PMTUDISC_DO 2 /* Always DF */ +#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */ +/* Always use interface mtu (ignores dst pmtu) but don't set DF flag. + * Also incoming ICMP frag_needed notifications will be ignored on + * this socket to prevent accepting spoofed ones. + */ +#define IP_PMTUDISC_INTERFACE 4 +/* weaker version of IP_PMTUDISC_INTERFACE, which allows packets to get + * fragmented if they exeed the interface mtu + */ +#define IP_PMTUDISC_OMIT 5 + +#define IP_MULTICAST_IF 32 +#define IP_MULTICAST_TTL 33 +#define IP_MULTICAST_LOOP 34 +#define IP_ADD_MEMBERSHIP 35 +#define IP_DROP_MEMBERSHIP 36 +#define IP_UNBLOCK_SOURCE 37 +#define IP_BLOCK_SOURCE 38 +#define IP_ADD_SOURCE_MEMBERSHIP 39 +#define IP_DROP_SOURCE_MEMBERSHIP 40 +#define IP_MSFILTER 41 +#define MCAST_JOIN_GROUP 42 +#define MCAST_BLOCK_SOURCE 43 +#define MCAST_UNBLOCK_SOURCE 44 +#define MCAST_LEAVE_GROUP 45 +#define MCAST_JOIN_SOURCE_GROUP 46 +#define MCAST_LEAVE_SOURCE_GROUP 47 +#define MCAST_MSFILTER 48 +#define IP_MULTICAST_ALL 49 +#define IP_UNICAST_IF 50 + +#define MCAST_EXCLUDE 0 +#define MCAST_INCLUDE 1 + +/* These need to appear somewhere around here */ +#define IP_DEFAULT_MULTICAST_TTL 1 +#define IP_DEFAULT_MULTICAST_LOOP 1 + +/* Request struct for multicast socket ops */ + +#if __UAPI_DEF_IP_MREQ +struct ip_mreq { + struct in_addr imr_multiaddr; /* IP multicast address of group */ + struct in_addr imr_interface; /* local IP address of interface */ +}; + +struct ip_mreqn { + struct in_addr imr_multiaddr; /* IP multicast address of group */ + struct in_addr imr_address; /* local IP address of interface */ + int imr_ifindex; /* Interface index */ +}; + +struct ip_mreq_source { + __be32 imr_multiaddr; + __be32 imr_interface; + __be32 imr_sourceaddr; +}; + +struct ip_msfilter { + __be32 imsf_multiaddr; + __be32 imsf_interface; + __u32 imsf_fmode; + __u32 imsf_numsrc; + union { + __be32 imsf_slist[1]; + __DECLARE_FLEX_ARRAY(__be32, imsf_slist_flex); + }; +}; + +#define IP_MSFILTER_SIZE(numsrc) \ + (sizeof(struct ip_msfilter) - sizeof(__u32) \ + + (numsrc) * sizeof(__u32)) + +struct group_req { + __u32 gr_interface; /* interface index */ + struct __kernel_sockaddr_storage gr_group; /* group address */ +}; + +struct group_source_req { + __u32 gsr_interface; /* interface index */ + struct __kernel_sockaddr_storage gsr_group; /* group address */ + struct __kernel_sockaddr_storage gsr_source; /* source address */ +}; + +struct group_filter { + union { + struct { + __u32 gf_interface_aux; /* interface index */ + struct __kernel_sockaddr_storage gf_group_aux; /* multicast address */ + __u32 gf_fmode_aux; /* filter mode */ + __u32 gf_numsrc_aux; /* number of sources */ + struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */ + }; + struct { + __u32 gf_interface; /* interface index */ + struct __kernel_sockaddr_storage gf_group; /* multicast address */ + __u32 gf_fmode; /* filter mode */ + __u32 gf_numsrc; /* number of sources */ + struct __kernel_sockaddr_storage gf_slist_flex[]; /* interface index */ + }; + }; +}; + +#define GROUP_FILTER_SIZE(numsrc) \ + (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \ + + (numsrc) * sizeof(struct __kernel_sockaddr_storage)) +#endif + +#if __UAPI_DEF_IN_PKTINFO +struct in_pktinfo { + int ipi_ifindex; + struct in_addr ipi_spec_dst; + struct in_addr ipi_addr; +}; +#endif + +/* Structure describing an Internet (IP) socket address. */ +#if __UAPI_DEF_SOCKADDR_IN +#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ +struct sockaddr_in { + __kernel_sa_family_t sin_family; /* Address family */ + __be16 sin_port; /* Port number */ + struct in_addr sin_addr; /* Internet address */ + + /* Pad to size of `struct sockaddr'. */ + unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) - + sizeof(unsigned short int) - sizeof(struct in_addr)]; +}; +#define sin_zero __pad /* for BSD UNIX comp. -FvK */ +#endif + +#if __UAPI_DEF_IN_CLASS +/* + * Definitions of the bits in an Internet address integer. + * On subnets, host and network parts are found according + * to the subnet mask, not these masks. + */ +#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0) +#define IN_CLASSA_NET 0xff000000 +#define IN_CLASSA_NSHIFT 24 +#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET) +#define IN_CLASSA_MAX 128 + +#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000) +#define IN_CLASSB_NET 0xffff0000 +#define IN_CLASSB_NSHIFT 16 +#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET) +#define IN_CLASSB_MAX 65536 + +#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000) +#define IN_CLASSC_NET 0xffffff00 +#define IN_CLASSC_NSHIFT 8 +#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET) + +#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000) +#define IN_MULTICAST(a) IN_CLASSD(a) +#define IN_MULTICAST_NET 0xe0000000 + +#define IN_BADCLASS(a) (((long int) (a) ) == (long int)0xffffffff) +#define IN_EXPERIMENTAL(a) IN_BADCLASS((a)) + +#define IN_CLASSE(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000) +#define IN_CLASSE_NET 0xffffffff +#define IN_CLASSE_NSHIFT 0 + +/* Address to accept any incoming messages. */ +#define INADDR_ANY ((unsigned long int) 0x00000000) + +/* Address to send to all hosts. */ +#define INADDR_BROADCAST ((unsigned long int) 0xffffffff) + +/* Address indicating an error return. */ +#define INADDR_NONE ((unsigned long int) 0xffffffff) + +/* Dummy address for src of ICMP replies if no real address is set (RFC7600). */ +#define INADDR_DUMMY ((unsigned long int) 0xc0000008) + +/* Network number for local host loopback. */ +#define IN_LOOPBACKNET 127 + +/* Address to loopback in software to local host. */ +#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */ +#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000) + +/* Defines for Multicast INADDR */ +#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */ +#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */ +#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */ +#define INADDR_ALLSNOOPERS_GROUP 0xe000006aU /* 224.0.0.106 */ +#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */ +#endif + +/* <asm/byteorder.h> contains the htonl type stuff.. */ +#include <asm/byteorder.h> + + +#endif /* _UAPI_LINUX_IN_H */ diff --git a/src/basic/linux/in6.h b/src/basic/linux/in6.h new file mode 100644 index 0000000..c4c53a9 --- /dev/null +++ b/src/basic/linux/in6.h @@ -0,0 +1,302 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Types and definitions for AF_INET6 + * Linux INET6 implementation + * + * Authors: + * Pedro Roque <roque@di.fc.ul.pt> + * + * Sources: + * IPv6 Program Interfaces for BSD Systems + * <draft-ietf-ipngwg-bsd-api-05.txt> + * + * Advanced Sockets API for IPv6 + * <draft-stevens-advanced-api-00.txt> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IN6_H +#define _UAPI_LINUX_IN6_H + +#include <linux/types.h> +#include <linux/libc-compat.h> + +/* + * IPv6 address structure + */ + +#if __UAPI_DEF_IN6_ADDR +struct in6_addr { + union { + __u8 u6_addr8[16]; +#if __UAPI_DEF_IN6_ADDR_ALT + __be16 u6_addr16[8]; + __be32 u6_addr32[4]; +#endif + } in6_u; +#define s6_addr in6_u.u6_addr8 +#if __UAPI_DEF_IN6_ADDR_ALT +#define s6_addr16 in6_u.u6_addr16 +#define s6_addr32 in6_u.u6_addr32 +#endif +}; +#endif /* __UAPI_DEF_IN6_ADDR */ + +#if __UAPI_DEF_SOCKADDR_IN6 +struct sockaddr_in6 { + unsigned short int sin6_family; /* AF_INET6 */ + __be16 sin6_port; /* Transport layer port # */ + __be32 sin6_flowinfo; /* IPv6 flow information */ + struct in6_addr sin6_addr; /* IPv6 address */ + __u32 sin6_scope_id; /* scope id (new in RFC2553) */ +}; +#endif /* __UAPI_DEF_SOCKADDR_IN6 */ + +#if __UAPI_DEF_IPV6_MREQ +struct ipv6_mreq { + /* IPv6 multicast address of group */ + struct in6_addr ipv6mr_multiaddr; + + /* local IPv6 address of interface */ + int ipv6mr_ifindex; +}; +#endif /* __UAPI_DEF_IVP6_MREQ */ + +#define ipv6mr_acaddr ipv6mr_multiaddr + +struct in6_flowlabel_req { + struct in6_addr flr_dst; + __be32 flr_label; + __u8 flr_action; + __u8 flr_share; + __u16 flr_flags; + __u16 flr_expires; + __u16 flr_linger; + __u32 __flr_pad; + /* Options in format of IPV6_PKTOPTIONS */ +}; + +#define IPV6_FL_A_GET 0 +#define IPV6_FL_A_PUT 1 +#define IPV6_FL_A_RENEW 2 + +#define IPV6_FL_F_CREATE 1 +#define IPV6_FL_F_EXCL 2 +#define IPV6_FL_F_REFLECT 4 +#define IPV6_FL_F_REMOTE 8 + +#define IPV6_FL_S_NONE 0 +#define IPV6_FL_S_EXCL 1 +#define IPV6_FL_S_PROCESS 2 +#define IPV6_FL_S_USER 3 +#define IPV6_FL_S_ANY 255 + + +/* + * Bitmask constant declarations to help applications select out the + * flow label and priority fields. + * + * Note that this are in host byte order while the flowinfo field of + * sockaddr_in6 is in network byte order. + */ + +#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff +#define IPV6_FLOWINFO_PRIORITY 0x0ff00000 + +/* These definitions are obsolete */ +#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000 +#define IPV6_PRIORITY_FILLER 0x0100 +#define IPV6_PRIORITY_UNATTENDED 0x0200 +#define IPV6_PRIORITY_RESERVED1 0x0300 +#define IPV6_PRIORITY_BULK 0x0400 +#define IPV6_PRIORITY_RESERVED2 0x0500 +#define IPV6_PRIORITY_INTERACTIVE 0x0600 +#define IPV6_PRIORITY_CONTROL 0x0700 +#define IPV6_PRIORITY_8 0x0800 +#define IPV6_PRIORITY_9 0x0900 +#define IPV6_PRIORITY_10 0x0a00 +#define IPV6_PRIORITY_11 0x0b00 +#define IPV6_PRIORITY_12 0x0c00 +#define IPV6_PRIORITY_13 0x0d00 +#define IPV6_PRIORITY_14 0x0e00 +#define IPV6_PRIORITY_15 0x0f00 + +/* + * IPV6 extension headers + */ +#if __UAPI_DEF_IPPROTO_V6 +#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ +#define IPPROTO_ROUTING 43 /* IPv6 routing header */ +#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ +#define IPPROTO_ICMPV6 58 /* ICMPv6 */ +#define IPPROTO_NONE 59 /* IPv6 no next header */ +#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ +#define IPPROTO_MH 135 /* IPv6 mobility header */ +#endif /* __UAPI_DEF_IPPROTO_V6 */ + +/* + * IPv6 TLV options. + */ +#define IPV6_TLV_PAD1 0 +#define IPV6_TLV_PADN 1 +#define IPV6_TLV_ROUTERALERT 5 +#define IPV6_TLV_CALIPSO 7 /* RFC 5570 */ +#define IPV6_TLV_IOAM 49 /* TEMPORARY IANA allocation for IOAM */ +#define IPV6_TLV_JUMBO 194 +#define IPV6_TLV_HAO 201 /* home address option */ + +/* + * IPV6 socket options + */ +#if __UAPI_DEF_IPV6_OPTIONS +#define IPV6_ADDRFORM 1 +#define IPV6_2292PKTINFO 2 +#define IPV6_2292HOPOPTS 3 +#define IPV6_2292DSTOPTS 4 +#define IPV6_2292RTHDR 5 +#define IPV6_2292PKTOPTIONS 6 +#define IPV6_CHECKSUM 7 +#define IPV6_2292HOPLIMIT 8 +#define IPV6_NEXTHOP 9 +#define IPV6_AUTHHDR 10 /* obsolete */ +#define IPV6_FLOWINFO 11 + +#define IPV6_UNICAST_HOPS 16 +#define IPV6_MULTICAST_IF 17 +#define IPV6_MULTICAST_HOPS 18 +#define IPV6_MULTICAST_LOOP 19 +#define IPV6_ADD_MEMBERSHIP 20 +#define IPV6_DROP_MEMBERSHIP 21 +#define IPV6_ROUTER_ALERT 22 +#define IPV6_MTU_DISCOVER 23 +#define IPV6_MTU 24 +#define IPV6_RECVERR 25 +#define IPV6_V6ONLY 26 +#define IPV6_JOIN_ANYCAST 27 +#define IPV6_LEAVE_ANYCAST 28 +#define IPV6_MULTICAST_ALL 29 +#define IPV6_ROUTER_ALERT_ISOLATE 30 +#define IPV6_RECVERR_RFC4884 31 + +/* IPV6_MTU_DISCOVER values */ +#define IPV6_PMTUDISC_DONT 0 +#define IPV6_PMTUDISC_WANT 1 +#define IPV6_PMTUDISC_DO 2 +#define IPV6_PMTUDISC_PROBE 3 +/* same as IPV6_PMTUDISC_PROBE, provided for symetry with IPv4 + * also see comments on IP_PMTUDISC_INTERFACE + */ +#define IPV6_PMTUDISC_INTERFACE 4 +/* weaker version of IPV6_PMTUDISC_INTERFACE, which allows packets to + * get fragmented if they exceed the interface mtu + */ +#define IPV6_PMTUDISC_OMIT 5 + +/* Flowlabel */ +#define IPV6_FLOWLABEL_MGR 32 +#define IPV6_FLOWINFO_SEND 33 + +#define IPV6_IPSEC_POLICY 34 +#define IPV6_XFRM_POLICY 35 +#define IPV6_HDRINCL 36 +#endif + +/* + * Multicast: + * Following socket options are shared between IPv4 and IPv6. + * + * MCAST_JOIN_GROUP 42 + * MCAST_BLOCK_SOURCE 43 + * MCAST_UNBLOCK_SOURCE 44 + * MCAST_LEAVE_GROUP 45 + * MCAST_JOIN_SOURCE_GROUP 46 + * MCAST_LEAVE_SOURCE_GROUP 47 + * MCAST_MSFILTER 48 + */ + +/* + * Advanced API (RFC3542) (1) + * + * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c. + */ + +#define IPV6_RECVPKTINFO 49 +#define IPV6_PKTINFO 50 +#define IPV6_RECVHOPLIMIT 51 +#define IPV6_HOPLIMIT 52 +#define IPV6_RECVHOPOPTS 53 +#define IPV6_HOPOPTS 54 +#define IPV6_RTHDRDSTOPTS 55 +#define IPV6_RECVRTHDR 56 +#define IPV6_RTHDR 57 +#define IPV6_RECVDSTOPTS 58 +#define IPV6_DSTOPTS 59 +#define IPV6_RECVPATHMTU 60 +#define IPV6_PATHMTU 61 +#define IPV6_DONTFRAG 62 +#if 0 /* not yet */ +#define IPV6_USE_MIN_MTU 63 +#endif + +/* + * Netfilter (1) + * + * Following socket options are used in ip6_tables; + * see include/linux/netfilter_ipv6/ip6_tables.h. + * + * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO 64 + * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES 65 + */ + +/* + * Advanced API (RFC3542) (2) + */ +#define IPV6_RECVTCLASS 66 +#define IPV6_TCLASS 67 + +/* + * Netfilter (2) + * + * Following socket options are used in ip6_tables; + * see include/linux/netfilter_ipv6/ip6_tables.h. + * + * IP6T_SO_GET_REVISION_MATCH 68 + * IP6T_SO_GET_REVISION_TARGET 69 + * IP6T_SO_ORIGINAL_DST 80 + */ + +#define IPV6_AUTOFLOWLABEL 70 +/* RFC5014: Source address selection */ +#define IPV6_ADDR_PREFERENCES 72 + +#define IPV6_PREFER_SRC_TMP 0x0001 +#define IPV6_PREFER_SRC_PUBLIC 0x0002 +#define IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100 +#define IPV6_PREFER_SRC_COA 0x0004 +#define IPV6_PREFER_SRC_HOME 0x0400 +#define IPV6_PREFER_SRC_CGA 0x0008 +#define IPV6_PREFER_SRC_NONCGA 0x0800 + +/* RFC5082: Generalized Ttl Security Mechanism */ +#define IPV6_MINHOPCOUNT 73 + +#define IPV6_ORIGDSTADDR 74 +#define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR +#define IPV6_TRANSPARENT 75 +#define IPV6_UNICAST_IF 76 +#define IPV6_RECVFRAGSIZE 77 +#define IPV6_FREEBIND 78 + +/* + * Multicast Routing: + * see include/uapi/linux/mroute6.h. + * + * MRT6_BASE 200 + * ... + * MRT6_MAX + */ +#endif /* _UAPI_LINUX_IN6_H */ diff --git a/src/basic/linux/ipv6_route.h b/src/basic/linux/ipv6_route.h new file mode 100644 index 0000000..593800a --- /dev/null +++ b/src/basic/linux/ipv6_route.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Linux INET6 implementation + * + * Authors: + * Pedro Roque <roque@di.fc.ul.pt> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IPV6_ROUTE_H +#define _UAPI_LINUX_IPV6_ROUTE_H + +#include <linux/types.h> +#include <linux/in6.h> /* For struct in6_addr. */ + +#define RTF_DEFAULT 0x00010000 /* default - learned via ND */ +#define RTF_ALLONLINK 0x00020000 /* (deprecated and will be removed) + fallback, no routers on link */ +#define RTF_ADDRCONF 0x00040000 /* addrconf route - RA */ +#define RTF_PREFIX_RT 0x00080000 /* A prefix only route - RA */ +#define RTF_ANYCAST 0x00100000 /* Anycast */ + +#define RTF_NONEXTHOP 0x00200000 /* route with no nexthop */ +#define RTF_EXPIRES 0x00400000 + +#define RTF_ROUTEINFO 0x00800000 /* route information - RA */ + +#define RTF_CACHE 0x01000000 /* read-only: can not be set by user */ +#define RTF_FLOW 0x02000000 /* flow significant route */ +#define RTF_POLICY 0x04000000 /* policy route */ + +#define RTF_PREF(pref) ((pref) << 27) +#define RTF_PREF_MASK 0x18000000 + +#define RTF_PCPU 0x40000000 /* read-only: can not be set by user */ +#define RTF_LOCAL 0x80000000 + + +struct in6_rtmsg { + struct in6_addr rtmsg_dst; + struct in6_addr rtmsg_src; + struct in6_addr rtmsg_gateway; + __u32 rtmsg_type; + __u16 rtmsg_dst_len; + __u16 rtmsg_src_len; + __u32 rtmsg_metric; + unsigned long rtmsg_info; + __u32 rtmsg_flags; + int rtmsg_ifindex; +}; + +#define RTMSG_NEWDEVICE 0x11 +#define RTMSG_DELDEVICE 0x12 +#define RTMSG_NEWROUTE 0x21 +#define RTMSG_DELROUTE 0x22 + +#define IP6_RT_PRIO_USER 1024 +#define IP6_RT_PRIO_ADDRCONF 256 + +#endif /* _UAPI_LINUX_IPV6_ROUTE_H */ diff --git a/src/basic/linux/l2tp.h b/src/basic/linux/l2tp.h new file mode 100644 index 0000000..7d81c3e --- /dev/null +++ b/src/basic/linux/l2tp.h @@ -0,0 +1,203 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * L2TP-over-IP socket for L2TPv3. + * + * Author: James Chapman <jchapman@katalix.com> + */ + +#ifndef _UAPI_LINUX_L2TP_H_ +#define _UAPI_LINUX_L2TP_H_ + +#include <linux/types.h> +#include <linux/socket.h> +#include <linux/in.h> +#include <linux/in6.h> + +/** + * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets + * @l2tp_family: address family number AF_L2TPIP. + * @l2tp_addr: protocol specific address information + * @l2tp_conn_id: connection id of tunnel + */ +#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ +struct sockaddr_l2tpip { + /* The first fields must match struct sockaddr_in */ + __kernel_sa_family_t l2tp_family; /* AF_INET */ + __be16 l2tp_unused; /* INET port number (unused) */ + struct in_addr l2tp_addr; /* Internet address */ + + __u32 l2tp_conn_id; /* Connection ID of tunnel */ + + /* Pad to size of `struct sockaddr'. */ + unsigned char __pad[__SOCK_SIZE__ - + sizeof(__kernel_sa_family_t) - + sizeof(__be16) - sizeof(struct in_addr) - + sizeof(__u32)]; +}; + +/** + * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets + * @l2tp_family: address family number AF_L2TPIP. + * @l2tp_addr: protocol specific address information + * @l2tp_conn_id: connection id of tunnel + */ +struct sockaddr_l2tpip6 { + /* The first fields must match struct sockaddr_in6 */ + __kernel_sa_family_t l2tp_family; /* AF_INET6 */ + __be16 l2tp_unused; /* INET port number (unused) */ + __be32 l2tp_flowinfo; /* IPv6 flow information */ + struct in6_addr l2tp_addr; /* IPv6 address */ + __u32 l2tp_scope_id; /* scope id (new in RFC2553) */ + __u32 l2tp_conn_id; /* Connection ID of tunnel */ +}; + +/***************************************************************************** + * NETLINK_GENERIC netlink family. + *****************************************************************************/ + +/* + * Commands. + * Valid TLVs of each command are:- + * TUNNEL_CREATE - CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum + * TUNNEL_DELETE - CONN_ID + * TUNNEL_MODIFY - CONN_ID, udpcsum + * TUNNEL_GETSTATS - CONN_ID, (stats) + * TUNNEL_GET - CONN_ID, (...) + * SESSION_CREATE - SESSION_ID, PW_TYPE, cookie, peer_cookie, l2spec + * SESSION_DELETE - SESSION_ID + * SESSION_MODIFY - SESSION_ID + * SESSION_GET - SESSION_ID, (...) + * SESSION_GETSTATS - SESSION_ID, (stats) + * + */ +enum { + L2TP_CMD_NOOP, + L2TP_CMD_TUNNEL_CREATE, + L2TP_CMD_TUNNEL_DELETE, + L2TP_CMD_TUNNEL_MODIFY, + L2TP_CMD_TUNNEL_GET, + L2TP_CMD_SESSION_CREATE, + L2TP_CMD_SESSION_DELETE, + L2TP_CMD_SESSION_MODIFY, + L2TP_CMD_SESSION_GET, + __L2TP_CMD_MAX, +}; + +#define L2TP_CMD_MAX (__L2TP_CMD_MAX - 1) + +/* + * ATTR types defined for L2TP + */ +enum { + L2TP_ATTR_NONE, /* no data */ + L2TP_ATTR_PW_TYPE, /* u16, enum l2tp_pwtype */ + L2TP_ATTR_ENCAP_TYPE, /* u16, enum l2tp_encap_type */ + L2TP_ATTR_OFFSET, /* u16 (not used) */ + L2TP_ATTR_DATA_SEQ, /* u16 (not used) */ + L2TP_ATTR_L2SPEC_TYPE, /* u8, enum l2tp_l2spec_type */ + L2TP_ATTR_L2SPEC_LEN, /* u8 (not used) */ + L2TP_ATTR_PROTO_VERSION, /* u8 */ + L2TP_ATTR_IFNAME, /* string */ + L2TP_ATTR_CONN_ID, /* u32 */ + L2TP_ATTR_PEER_CONN_ID, /* u32 */ + L2TP_ATTR_SESSION_ID, /* u32 */ + L2TP_ATTR_PEER_SESSION_ID, /* u32 */ + L2TP_ATTR_UDP_CSUM, /* u8 */ + L2TP_ATTR_VLAN_ID, /* u16 (not used) */ + L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */ + L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */ + L2TP_ATTR_DEBUG, /* u32, enum l2tp_debug_flags (not used) */ + L2TP_ATTR_RECV_SEQ, /* u8 */ + L2TP_ATTR_SEND_SEQ, /* u8 */ + L2TP_ATTR_LNS_MODE, /* u8 */ + L2TP_ATTR_USING_IPSEC, /* u8 */ + L2TP_ATTR_RECV_TIMEOUT, /* msec */ + L2TP_ATTR_FD, /* int */ + L2TP_ATTR_IP_SADDR, /* u32 */ + L2TP_ATTR_IP_DADDR, /* u32 */ + L2TP_ATTR_UDP_SPORT, /* u16 */ + L2TP_ATTR_UDP_DPORT, /* u16 */ + L2TP_ATTR_MTU, /* u16 (not used) */ + L2TP_ATTR_MRU, /* u16 (not used) */ + L2TP_ATTR_STATS, /* nested */ + L2TP_ATTR_IP6_SADDR, /* struct in6_addr */ + L2TP_ATTR_IP6_DADDR, /* struct in6_addr */ + L2TP_ATTR_UDP_ZERO_CSUM6_TX, /* flag */ + L2TP_ATTR_UDP_ZERO_CSUM6_RX, /* flag */ + L2TP_ATTR_PAD, + __L2TP_ATTR_MAX, +}; + +#define L2TP_ATTR_MAX (__L2TP_ATTR_MAX - 1) + +/* Nested in L2TP_ATTR_STATS */ +enum { + L2TP_ATTR_STATS_NONE, /* no data */ + L2TP_ATTR_TX_PACKETS, /* u64 */ + L2TP_ATTR_TX_BYTES, /* u64 */ + L2TP_ATTR_TX_ERRORS, /* u64 */ + L2TP_ATTR_RX_PACKETS, /* u64 */ + L2TP_ATTR_RX_BYTES, /* u64 */ + L2TP_ATTR_RX_SEQ_DISCARDS, /* u64 */ + L2TP_ATTR_RX_OOS_PACKETS, /* u64 */ + L2TP_ATTR_RX_ERRORS, /* u64 */ + L2TP_ATTR_STATS_PAD, + L2TP_ATTR_RX_COOKIE_DISCARDS, /* u64 */ + L2TP_ATTR_RX_INVALID, /* u64 */ + __L2TP_ATTR_STATS_MAX, +}; + +#define L2TP_ATTR_STATS_MAX (__L2TP_ATTR_STATS_MAX - 1) + +enum l2tp_pwtype { + L2TP_PWTYPE_NONE = 0x0000, + L2TP_PWTYPE_ETH_VLAN = 0x0004, + L2TP_PWTYPE_ETH = 0x0005, + L2TP_PWTYPE_PPP = 0x0007, + L2TP_PWTYPE_PPP_AC = 0x0008, + L2TP_PWTYPE_IP = 0x000b, + __L2TP_PWTYPE_MAX +}; + +enum l2tp_l2spec_type { + L2TP_L2SPECTYPE_NONE, + L2TP_L2SPECTYPE_DEFAULT, +}; + +enum l2tp_encap_type { + L2TP_ENCAPTYPE_UDP, + L2TP_ENCAPTYPE_IP, +}; + +/* For L2TP_ATTR_DATA_SEQ. Unused. */ +enum l2tp_seqmode { + L2TP_SEQ_NONE = 0, + L2TP_SEQ_IP = 1, + L2TP_SEQ_ALL = 2, +}; + +/** + * enum l2tp_debug_flags - debug message categories for L2TP tunnels/sessions. + * + * Unused. + * + * @L2TP_MSG_DEBUG: verbose debug (if compiled in) + * @L2TP_MSG_CONTROL: userspace - kernel interface + * @L2TP_MSG_SEQ: sequence numbers + * @L2TP_MSG_DATA: data packets + */ +enum l2tp_debug_flags { + L2TP_MSG_DEBUG = (1 << 0), + L2TP_MSG_CONTROL = (1 << 1), + L2TP_MSG_SEQ = (1 << 2), + L2TP_MSG_DATA = (1 << 3), +}; + +/* + * NETLINK_GENERIC related info + */ +#define L2TP_GENL_NAME "l2tp" +#define L2TP_GENL_VERSION 0x1 +#define L2TP_GENL_MCGROUP "l2tp" + +#endif /* _UAPI_LINUX_L2TP_H_ */ diff --git a/src/basic/linux/libc-compat.h b/src/basic/linux/libc-compat.h new file mode 100644 index 0000000..8254c93 --- /dev/null +++ b/src/basic/linux/libc-compat.h @@ -0,0 +1,267 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Compatibility interface for userspace libc header coordination: + * + * Define compatibility macros that are used to control the inclusion or + * exclusion of UAPI structures and definitions in coordination with another + * userspace C library. + * + * This header is intended to solve the problem of UAPI definitions that + * conflict with userspace definitions. If a UAPI header has such conflicting + * definitions then the solution is as follows: + * + * * Synchronize the UAPI header and the libc headers so either one can be + * used and such that the ABI is preserved. If this is not possible then + * no simple compatibility interface exists (you need to write translating + * wrappers and rename things) and you can't use this interface. + * + * Then follow this process: + * + * (a) Include libc-compat.h in the UAPI header. + * e.g. #include <linux/libc-compat.h> + * This include must be as early as possible. + * + * (b) In libc-compat.h add enough code to detect that the comflicting + * userspace libc header has been included first. + * + * (c) If the userspace libc header has been included first define a set of + * guard macros of the form __UAPI_DEF_FOO and set their values to 1, else + * set their values to 0. + * + * (d) Back in the UAPI header with the conflicting definitions, guard the + * definitions with: + * #if __UAPI_DEF_FOO + * ... + * #endif + * + * This fixes the situation where the linux headers are included *after* the + * libc headers. To fix the problem with the inclusion in the other order the + * userspace libc headers must be fixed like this: + * + * * For all definitions that conflict with kernel definitions wrap those + * defines in the following: + * #if !__UAPI_DEF_FOO + * ... + * #endif + * + * This prevents the redefinition of a construct already defined by the kernel. + */ +#ifndef _UAPI_LIBC_COMPAT_H +#define _UAPI_LIBC_COMPAT_H + +/* We have included glibc headers... */ +#if defined(__GLIBC__) + +/* Coordinate with glibc net/if.h header. */ +#if defined(_NET_IF_H) && defined(__USE_MISC) + +/* GLIBC headers included first so don't define anything + * that would already be defined. */ + +#define __UAPI_DEF_IF_IFCONF 0 +#define __UAPI_DEF_IF_IFMAP 0 +#define __UAPI_DEF_IF_IFNAMSIZ 0 +#define __UAPI_DEF_IF_IFREQ 0 +/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS 0 +/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ +#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 +#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */ + +#else /* _NET_IF_H */ + +/* Linux headers included first, and we must define everything + * we need. The expectation is that glibc will check the + * __UAPI_DEF_* defines and adjust appropriately. */ + +#define __UAPI_DEF_IF_IFCONF 1 +#define __UAPI_DEF_IF_IFMAP 1 +#define __UAPI_DEF_IF_IFNAMSIZ 1 +#define __UAPI_DEF_IF_IFREQ 1 +/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1 +/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 + +#endif /* _NET_IF_H */ + +/* Coordinate with glibc netinet/in.h header. */ +#if defined(_NETINET_IN_H) + +/* GLIBC headers included first so don't define anything + * that would already be defined. */ +#define __UAPI_DEF_IN_ADDR 0 +#define __UAPI_DEF_IN_IPPROTO 0 +#define __UAPI_DEF_IN_PKTINFO 0 +#define __UAPI_DEF_IP_MREQ 0 +#define __UAPI_DEF_SOCKADDR_IN 0 +#define __UAPI_DEF_IN_CLASS 0 + +#define __UAPI_DEF_IN6_ADDR 0 +/* The exception is the in6_addr macros which must be defined + * if the glibc code didn't define them. This guard matches + * the guard in glibc/inet/netinet/in.h which defines the + * additional in6_addr macros e.g. s6_addr16, and s6_addr32. */ +#if defined(__USE_MISC) || defined (__USE_GNU) +#define __UAPI_DEF_IN6_ADDR_ALT 0 +#else +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#endif +#define __UAPI_DEF_SOCKADDR_IN6 0 +#define __UAPI_DEF_IPV6_MREQ 0 +#define __UAPI_DEF_IPPROTO_V6 0 +#define __UAPI_DEF_IPV6_OPTIONS 0 +#define __UAPI_DEF_IN6_PKTINFO 0 +#define __UAPI_DEF_IP6_MTUINFO 0 + +#else + +/* Linux headers included first, and we must define everything + * we need. The expectation is that glibc will check the + * __UAPI_DEF_* defines and adjust appropriately. */ +#define __UAPI_DEF_IN_ADDR 1 +#define __UAPI_DEF_IN_IPPROTO 1 +#define __UAPI_DEF_IN_PKTINFO 1 +#define __UAPI_DEF_IP_MREQ 1 +#define __UAPI_DEF_SOCKADDR_IN 1 +#define __UAPI_DEF_IN_CLASS 1 + +#define __UAPI_DEF_IN6_ADDR 1 +/* We unconditionally define the in6_addr macros and glibc must + * coordinate. */ +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#define __UAPI_DEF_IPV6_MREQ 1 +#define __UAPI_DEF_IPPROTO_V6 1 +#define __UAPI_DEF_IPV6_OPTIONS 1 +#define __UAPI_DEF_IN6_PKTINFO 1 +#define __UAPI_DEF_IP6_MTUINFO 1 + +#endif /* _NETINET_IN_H */ + +/* Coordinate with glibc netipx/ipx.h header. */ +#if defined(__NETIPX_IPX_H) + +#define __UAPI_DEF_SOCKADDR_IPX 0 +#define __UAPI_DEF_IPX_ROUTE_DEFINITION 0 +#define __UAPI_DEF_IPX_INTERFACE_DEFINITION 0 +#define __UAPI_DEF_IPX_CONFIG_DATA 0 +#define __UAPI_DEF_IPX_ROUTE_DEF 0 + +#else /* defined(__NETIPX_IPX_H) */ + +#define __UAPI_DEF_SOCKADDR_IPX 1 +#define __UAPI_DEF_IPX_ROUTE_DEFINITION 1 +#define __UAPI_DEF_IPX_INTERFACE_DEFINITION 1 +#define __UAPI_DEF_IPX_CONFIG_DATA 1 +#define __UAPI_DEF_IPX_ROUTE_DEF 1 + +#endif /* defined(__NETIPX_IPX_H) */ + +/* Definitions for xattr.h */ +#if defined(_SYS_XATTR_H) +#define __UAPI_DEF_XATTR 0 +#else +#define __UAPI_DEF_XATTR 1 +#endif + +/* If we did not see any headers from any supported C libraries, + * or we are being included in the kernel, then define everything + * that we need. Check for previous __UAPI_* definitions to give + * unsupported C libraries a way to opt out of any kernel definition. */ +#else /* !defined(__GLIBC__) */ + +/* Definitions for if.h */ +#ifndef __UAPI_DEF_IF_IFCONF +#define __UAPI_DEF_IF_IFCONF 1 +#endif +#ifndef __UAPI_DEF_IF_IFMAP +#define __UAPI_DEF_IF_IFMAP 1 +#endif +#ifndef __UAPI_DEF_IF_IFNAMSIZ +#define __UAPI_DEF_IF_IFNAMSIZ 1 +#endif +#ifndef __UAPI_DEF_IF_IFREQ +#define __UAPI_DEF_IF_IFREQ 1 +#endif +/* Everything up to IFF_DYNAMIC, matches net/if.h until glibc 2.23 */ +#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS 1 +#endif +/* For the future if glibc adds IFF_LOWER_UP, IFF_DORMANT and IFF_ECHO */ +#ifndef __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO +#define __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO 1 +#endif + +/* Definitions for in.h */ +#ifndef __UAPI_DEF_IN_ADDR +#define __UAPI_DEF_IN_ADDR 1 +#endif +#ifndef __UAPI_DEF_IN_IPPROTO +#define __UAPI_DEF_IN_IPPROTO 1 +#endif +#ifndef __UAPI_DEF_IN_PKTINFO +#define __UAPI_DEF_IN_PKTINFO 1 +#endif +#ifndef __UAPI_DEF_IP_MREQ +#define __UAPI_DEF_IP_MREQ 1 +#endif +#ifndef __UAPI_DEF_SOCKADDR_IN +#define __UAPI_DEF_SOCKADDR_IN 1 +#endif +#ifndef __UAPI_DEF_IN_CLASS +#define __UAPI_DEF_IN_CLASS 1 +#endif + +/* Definitions for in6.h */ +#ifndef __UAPI_DEF_IN6_ADDR +#define __UAPI_DEF_IN6_ADDR 1 +#endif +#ifndef __UAPI_DEF_IN6_ADDR_ALT +#define __UAPI_DEF_IN6_ADDR_ALT 1 +#endif +#ifndef __UAPI_DEF_SOCKADDR_IN6 +#define __UAPI_DEF_SOCKADDR_IN6 1 +#endif +#ifndef __UAPI_DEF_IPV6_MREQ +#define __UAPI_DEF_IPV6_MREQ 1 +#endif +#ifndef __UAPI_DEF_IPPROTO_V6 +#define __UAPI_DEF_IPPROTO_V6 1 +#endif +#ifndef __UAPI_DEF_IPV6_OPTIONS +#define __UAPI_DEF_IPV6_OPTIONS 1 +#endif +#ifndef __UAPI_DEF_IN6_PKTINFO +#define __UAPI_DEF_IN6_PKTINFO 1 +#endif +#ifndef __UAPI_DEF_IP6_MTUINFO +#define __UAPI_DEF_IP6_MTUINFO 1 +#endif + +/* Definitions for ipx.h */ +#ifndef __UAPI_DEF_SOCKADDR_IPX +#define __UAPI_DEF_SOCKADDR_IPX 1 +#endif +#ifndef __UAPI_DEF_IPX_ROUTE_DEFINITION +#define __UAPI_DEF_IPX_ROUTE_DEFINITION 1 +#endif +#ifndef __UAPI_DEF_IPX_INTERFACE_DEFINITION +#define __UAPI_DEF_IPX_INTERFACE_DEFINITION 1 +#endif +#ifndef __UAPI_DEF_IPX_CONFIG_DATA +#define __UAPI_DEF_IPX_CONFIG_DATA 1 +#endif +#ifndef __UAPI_DEF_IPX_ROUTE_DEF +#define __UAPI_DEF_IPX_ROUTE_DEF 1 +#endif + +/* Definitions for xattr.h */ +#ifndef __UAPI_DEF_XATTR +#define __UAPI_DEF_XATTR 1 +#endif + +#endif /* __GLIBC__ */ + +#endif /* _UAPI_LIBC_COMPAT_H */ diff --git a/src/basic/linux/mrp_bridge.h b/src/basic/linux/mrp_bridge.h new file mode 100644 index 0000000..bd4424d --- /dev/null +++ b/src/basic/linux/mrp_bridge.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ + +#ifndef _UAPI_LINUX_MRP_BRIDGE_H_ +#define _UAPI_LINUX_MRP_BRIDGE_H_ + +#include <linux/types.h> +#include <linux/if_ether.h> + +#define MRP_MAX_FRAME_LENGTH 200 +#define MRP_DEFAULT_PRIO 0x8000 +#define MRP_DOMAIN_UUID_LENGTH 16 +#define MRP_VERSION 1 +#define MRP_FRAME_PRIO 7 +#define MRP_OUI_LENGTH 3 +#define MRP_MANUFACTURE_DATA_LENGTH 2 + +enum br_mrp_ring_role_type { + BR_MRP_RING_ROLE_DISABLED, + BR_MRP_RING_ROLE_MRC, + BR_MRP_RING_ROLE_MRM, + BR_MRP_RING_ROLE_MRA, +}; + +enum br_mrp_in_role_type { + BR_MRP_IN_ROLE_DISABLED, + BR_MRP_IN_ROLE_MIC, + BR_MRP_IN_ROLE_MIM, +}; + +enum br_mrp_ring_state_type { + BR_MRP_RING_STATE_OPEN, + BR_MRP_RING_STATE_CLOSED, +}; + +enum br_mrp_in_state_type { + BR_MRP_IN_STATE_OPEN, + BR_MRP_IN_STATE_CLOSED, +}; + +enum br_mrp_port_state_type { + BR_MRP_PORT_STATE_DISABLED, + BR_MRP_PORT_STATE_BLOCKED, + BR_MRP_PORT_STATE_FORWARDING, + BR_MRP_PORT_STATE_NOT_CONNECTED, +}; + +enum br_mrp_port_role_type { + BR_MRP_PORT_ROLE_PRIMARY, + BR_MRP_PORT_ROLE_SECONDARY, + BR_MRP_PORT_ROLE_INTER, +}; + +enum br_mrp_tlv_header_type { + BR_MRP_TLV_HEADER_END = 0x0, + BR_MRP_TLV_HEADER_COMMON = 0x1, + BR_MRP_TLV_HEADER_RING_TEST = 0x2, + BR_MRP_TLV_HEADER_RING_TOPO = 0x3, + BR_MRP_TLV_HEADER_RING_LINK_DOWN = 0x4, + BR_MRP_TLV_HEADER_RING_LINK_UP = 0x5, + BR_MRP_TLV_HEADER_IN_TEST = 0x6, + BR_MRP_TLV_HEADER_IN_TOPO = 0x7, + BR_MRP_TLV_HEADER_IN_LINK_DOWN = 0x8, + BR_MRP_TLV_HEADER_IN_LINK_UP = 0x9, + BR_MRP_TLV_HEADER_IN_LINK_STATUS = 0xa, + BR_MRP_TLV_HEADER_OPTION = 0x7f, +}; + +enum br_mrp_sub_tlv_header_type { + BR_MRP_SUB_TLV_HEADER_TEST_MGR_NACK = 0x1, + BR_MRP_SUB_TLV_HEADER_TEST_PROPAGATE = 0x2, + BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR = 0x3, +}; + +#endif diff --git a/src/basic/linux/netdevice.h b/src/basic/linux/netdevice.h new file mode 100644 index 0000000..f3770c5 --- /dev/null +++ b/src/basic/linux/netdevice.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the Interfaces handler. + * + * Version: @(#)dev.h 1.0.10 08/12/93 + * + * Authors: Ross Biro + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * Corey Minyard <wf-rch!minyard@relay.EU.net> + * Donald J. Becker, <becker@cesdis.gsfc.nasa.gov> + * Alan Cox, <alan@lxorguk.ukuu.org.uk> + * Bjorn Ekwall. <bj0rn@blox.se> + * Pekka Riikonen <priikone@poseidon.pspt.fi> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Moved to /usr/include/linux for NET3 + */ +#ifndef _UAPI_LINUX_NETDEVICE_H +#define _UAPI_LINUX_NETDEVICE_H + +#include <linux/if.h> +#include <linux/if_ether.h> +#include <linux/if_packet.h> +#include <linux/if_link.h> + + +#define MAX_ADDR_LEN 32 /* Largest hardware address length */ + +/* Initial net device group. All devices belong to group 0 by default. */ +#define INIT_NETDEV_GROUP 0 + + +/* interface name assignment types (sysfs name_assign_type attribute) */ +#define NET_NAME_UNKNOWN 0 /* unknown origin (not exposed to userspace) */ +#define NET_NAME_ENUM 1 /* enumerated by kernel */ +#define NET_NAME_PREDICTABLE 2 /* predictably named by the kernel */ +#define NET_NAME_USER 3 /* provided by user-space */ +#define NET_NAME_RENAMED 4 /* renamed by user-space */ + +/* Media selection options. */ +enum { + IF_PORT_UNKNOWN = 0, + IF_PORT_10BASE2, + IF_PORT_10BASET, + IF_PORT_AUI, + IF_PORT_100BASET, + IF_PORT_100BASETX, + IF_PORT_100BASEFX +}; + +/* hardware address assignment types */ +#define NET_ADDR_PERM 0 /* address is permanent (default) */ +#define NET_ADDR_RANDOM 1 /* address is generated randomly */ +#define NET_ADDR_STOLEN 2 /* address is stolen from other device */ +#define NET_ADDR_SET 3 /* address is set using + * dev_set_mac_address() */ + +#endif /* _UAPI_LINUX_NETDEVICE_H */ diff --git a/src/basic/linux/netfilter/nf_tables.h b/src/basic/linux/netfilter/nf_tables.h new file mode 100644 index 0000000..cfa844d --- /dev/null +++ b/src/basic/linux/netfilter/nf_tables.h @@ -0,0 +1,1963 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_NF_TABLES_H +#define _LINUX_NF_TABLES_H + +#define NFT_NAME_MAXLEN 256 +#define NFT_TABLE_MAXNAMELEN NFT_NAME_MAXLEN +#define NFT_CHAIN_MAXNAMELEN NFT_NAME_MAXLEN +#define NFT_SET_MAXNAMELEN NFT_NAME_MAXLEN +#define NFT_OBJ_MAXNAMELEN NFT_NAME_MAXLEN +#define NFT_USERDATA_MAXLEN 256 +#define NFT_OSF_MAXGENRELEN 16 + +/** + * enum nft_registers - nf_tables registers + * + * nf_tables used to have five registers: a verdict register and four data + * registers of size 16. The data registers have been changed to 16 registers + * of size 4. For compatibility reasons, the NFT_REG_[1-4] registers still + * map to areas of size 16, the 4 byte registers are addressed using + * NFT_REG32_00 - NFT_REG32_15. + */ +enum nft_registers { + NFT_REG_VERDICT, + NFT_REG_1, + NFT_REG_2, + NFT_REG_3, + NFT_REG_4, + __NFT_REG_MAX, + + NFT_REG32_00 = 8, + NFT_REG32_01, + NFT_REG32_02, + NFT_REG32_03, + NFT_REG32_04, + NFT_REG32_05, + NFT_REG32_06, + NFT_REG32_07, + NFT_REG32_08, + NFT_REG32_09, + NFT_REG32_10, + NFT_REG32_11, + NFT_REG32_12, + NFT_REG32_13, + NFT_REG32_14, + NFT_REG32_15, +}; +#define NFT_REG_MAX (__NFT_REG_MAX - 1) + +#define NFT_REG_SIZE 16 +#define NFT_REG32_SIZE 4 +#define NFT_REG32_COUNT (NFT_REG32_15 - NFT_REG32_00 + 1) + +/** + * enum nft_verdicts - nf_tables internal verdicts + * + * @NFT_CONTINUE: continue evaluation of the current rule + * @NFT_BREAK: terminate evaluation of the current rule + * @NFT_JUMP: push the current chain on the jump stack and jump to a chain + * @NFT_GOTO: jump to a chain without pushing the current chain on the jump stack + * @NFT_RETURN: return to the topmost chain on the jump stack + * + * The nf_tables verdicts share their numeric space with the netfilter verdicts. + */ +enum nft_verdicts { + NFT_CONTINUE = -1, + NFT_BREAK = -2, + NFT_JUMP = -3, + NFT_GOTO = -4, + NFT_RETURN = -5, +}; + +/** + * enum nf_tables_msg_types - nf_tables netlink message types + * + * @NFT_MSG_NEWTABLE: create a new table (enum nft_table_attributes) + * @NFT_MSG_GETTABLE: get a table (enum nft_table_attributes) + * @NFT_MSG_DELTABLE: delete a table (enum nft_table_attributes) + * @NFT_MSG_NEWCHAIN: create a new chain (enum nft_chain_attributes) + * @NFT_MSG_GETCHAIN: get a chain (enum nft_chain_attributes) + * @NFT_MSG_DELCHAIN: delete a chain (enum nft_chain_attributes) + * @NFT_MSG_NEWRULE: create a new rule (enum nft_rule_attributes) + * @NFT_MSG_GETRULE: get a rule (enum nft_rule_attributes) + * @NFT_MSG_DELRULE: delete a rule (enum nft_rule_attributes) + * @NFT_MSG_NEWSET: create a new set (enum nft_set_attributes) + * @NFT_MSG_GETSET: get a set (enum nft_set_attributes) + * @NFT_MSG_DELSET: delete a set (enum nft_set_attributes) + * @NFT_MSG_NEWSETELEM: create a new set element (enum nft_set_elem_attributes) + * @NFT_MSG_GETSETELEM: get a set element (enum nft_set_elem_attributes) + * @NFT_MSG_DELSETELEM: delete a set element (enum nft_set_elem_attributes) + * @NFT_MSG_NEWGEN: announce a new generation, only for events (enum nft_gen_attributes) + * @NFT_MSG_GETGEN: get the rule-set generation (enum nft_gen_attributes) + * @NFT_MSG_TRACE: trace event (enum nft_trace_attributes) + * @NFT_MSG_NEWOBJ: create a stateful object (enum nft_obj_attributes) + * @NFT_MSG_GETOBJ: get a stateful object (enum nft_obj_attributes) + * @NFT_MSG_DELOBJ: delete a stateful object (enum nft_obj_attributes) + * @NFT_MSG_GETOBJ_RESET: get and reset a stateful object (enum nft_obj_attributes) + * @NFT_MSG_NEWFLOWTABLE: add new flow table (enum nft_flowtable_attributes) + * @NFT_MSG_GETFLOWTABLE: get flow table (enum nft_flowtable_attributes) + * @NFT_MSG_DELFLOWTABLE: delete flow table (enum nft_flowtable_attributes) + * @NFT_MSG_GETRULE_RESET: get rules and reset stateful expressions (enum nft_obj_attributes) + */ +enum nf_tables_msg_types { + NFT_MSG_NEWTABLE, + NFT_MSG_GETTABLE, + NFT_MSG_DELTABLE, + NFT_MSG_NEWCHAIN, + NFT_MSG_GETCHAIN, + NFT_MSG_DELCHAIN, + NFT_MSG_NEWRULE, + NFT_MSG_GETRULE, + NFT_MSG_DELRULE, + NFT_MSG_NEWSET, + NFT_MSG_GETSET, + NFT_MSG_DELSET, + NFT_MSG_NEWSETELEM, + NFT_MSG_GETSETELEM, + NFT_MSG_DELSETELEM, + NFT_MSG_NEWGEN, + NFT_MSG_GETGEN, + NFT_MSG_TRACE, + NFT_MSG_NEWOBJ, + NFT_MSG_GETOBJ, + NFT_MSG_DELOBJ, + NFT_MSG_GETOBJ_RESET, + NFT_MSG_NEWFLOWTABLE, + NFT_MSG_GETFLOWTABLE, + NFT_MSG_DELFLOWTABLE, + NFT_MSG_GETRULE_RESET, + NFT_MSG_MAX, +}; + +/** + * enum nft_list_attributes - nf_tables generic list netlink attributes + * + * @NFTA_LIST_ELEM: list element (NLA_NESTED) + */ +enum nft_list_attributes { + NFTA_LIST_UNSPEC, + NFTA_LIST_ELEM, + __NFTA_LIST_MAX +}; +#define NFTA_LIST_MAX (__NFTA_LIST_MAX - 1) + +/** + * enum nft_hook_attributes - nf_tables netfilter hook netlink attributes + * + * @NFTA_HOOK_HOOKNUM: netfilter hook number (NLA_U32) + * @NFTA_HOOK_PRIORITY: netfilter hook priority (NLA_U32) + * @NFTA_HOOK_DEV: netdevice name (NLA_STRING) + * @NFTA_HOOK_DEVS: list of netdevices (NLA_NESTED) + */ +enum nft_hook_attributes { + NFTA_HOOK_UNSPEC, + NFTA_HOOK_HOOKNUM, + NFTA_HOOK_PRIORITY, + NFTA_HOOK_DEV, + NFTA_HOOK_DEVS, + __NFTA_HOOK_MAX +}; +#define NFTA_HOOK_MAX (__NFTA_HOOK_MAX - 1) + +/** + * enum nft_table_flags - nf_tables table flags + * + * @NFT_TABLE_F_DORMANT: this table is not active + */ +enum nft_table_flags { + NFT_TABLE_F_DORMANT = 0x1, + NFT_TABLE_F_OWNER = 0x2, +}; +#define NFT_TABLE_F_MASK (NFT_TABLE_F_DORMANT | \ + NFT_TABLE_F_OWNER) + +/** + * enum nft_table_attributes - nf_tables table netlink attributes + * + * @NFTA_TABLE_NAME: name of the table (NLA_STRING) + * @NFTA_TABLE_FLAGS: bitmask of enum nft_table_flags (NLA_U32) + * @NFTA_TABLE_USE: number of chains in this table (NLA_U32) + * @NFTA_TABLE_USERDATA: user data (NLA_BINARY) + * @NFTA_TABLE_OWNER: owner of this table through netlink portID (NLA_U32) + */ +enum nft_table_attributes { + NFTA_TABLE_UNSPEC, + NFTA_TABLE_NAME, + NFTA_TABLE_FLAGS, + NFTA_TABLE_USE, + NFTA_TABLE_HANDLE, + NFTA_TABLE_PAD, + NFTA_TABLE_USERDATA, + NFTA_TABLE_OWNER, + __NFTA_TABLE_MAX +}; +#define NFTA_TABLE_MAX (__NFTA_TABLE_MAX - 1) + +enum nft_chain_flags { + NFT_CHAIN_BASE = (1 << 0), + NFT_CHAIN_HW_OFFLOAD = (1 << 1), + NFT_CHAIN_BINDING = (1 << 2), +}; +#define NFT_CHAIN_FLAGS (NFT_CHAIN_BASE | \ + NFT_CHAIN_HW_OFFLOAD | \ + NFT_CHAIN_BINDING) + +/** + * enum nft_chain_attributes - nf_tables chain netlink attributes + * + * @NFTA_CHAIN_TABLE: name of the table containing the chain (NLA_STRING) + * @NFTA_CHAIN_HANDLE: numeric handle of the chain (NLA_U64) + * @NFTA_CHAIN_NAME: name of the chain (NLA_STRING) + * @NFTA_CHAIN_HOOK: hook specification for basechains (NLA_NESTED: nft_hook_attributes) + * @NFTA_CHAIN_POLICY: numeric policy of the chain (NLA_U32) + * @NFTA_CHAIN_USE: number of references to this chain (NLA_U32) + * @NFTA_CHAIN_TYPE: type name of the string (NLA_NUL_STRING) + * @NFTA_CHAIN_COUNTERS: counter specification of the chain (NLA_NESTED: nft_counter_attributes) + * @NFTA_CHAIN_FLAGS: chain flags + * @NFTA_CHAIN_ID: uniquely identifies a chain in a transaction (NLA_U32) + * @NFTA_CHAIN_USERDATA: user data (NLA_BINARY) + */ +enum nft_chain_attributes { + NFTA_CHAIN_UNSPEC, + NFTA_CHAIN_TABLE, + NFTA_CHAIN_HANDLE, + NFTA_CHAIN_NAME, + NFTA_CHAIN_HOOK, + NFTA_CHAIN_POLICY, + NFTA_CHAIN_USE, + NFTA_CHAIN_TYPE, + NFTA_CHAIN_COUNTERS, + NFTA_CHAIN_PAD, + NFTA_CHAIN_FLAGS, + NFTA_CHAIN_ID, + NFTA_CHAIN_USERDATA, + __NFTA_CHAIN_MAX +}; +#define NFTA_CHAIN_MAX (__NFTA_CHAIN_MAX - 1) + +/** + * enum nft_rule_attributes - nf_tables rule netlink attributes + * + * @NFTA_RULE_TABLE: name of the table containing the rule (NLA_STRING) + * @NFTA_RULE_CHAIN: name of the chain containing the rule (NLA_STRING) + * @NFTA_RULE_HANDLE: numeric handle of the rule (NLA_U64) + * @NFTA_RULE_EXPRESSIONS: list of expressions (NLA_NESTED: nft_expr_attributes) + * @NFTA_RULE_COMPAT: compatibility specifications of the rule (NLA_NESTED: nft_rule_compat_attributes) + * @NFTA_RULE_POSITION: numeric handle of the previous rule (NLA_U64) + * @NFTA_RULE_USERDATA: user data (NLA_BINARY, NFT_USERDATA_MAXLEN) + * @NFTA_RULE_ID: uniquely identifies a rule in a transaction (NLA_U32) + * @NFTA_RULE_POSITION_ID: transaction unique identifier of the previous rule (NLA_U32) + */ +enum nft_rule_attributes { + NFTA_RULE_UNSPEC, + NFTA_RULE_TABLE, + NFTA_RULE_CHAIN, + NFTA_RULE_HANDLE, + NFTA_RULE_EXPRESSIONS, + NFTA_RULE_COMPAT, + NFTA_RULE_POSITION, + NFTA_RULE_USERDATA, + NFTA_RULE_PAD, + NFTA_RULE_ID, + NFTA_RULE_POSITION_ID, + NFTA_RULE_CHAIN_ID, + __NFTA_RULE_MAX +}; +#define NFTA_RULE_MAX (__NFTA_RULE_MAX - 1) + +/** + * enum nft_rule_compat_flags - nf_tables rule compat flags + * + * @NFT_RULE_COMPAT_F_INV: invert the check result + */ +enum nft_rule_compat_flags { + NFT_RULE_COMPAT_F_INV = (1 << 1), + NFT_RULE_COMPAT_F_MASK = NFT_RULE_COMPAT_F_INV, +}; + +/** + * enum nft_rule_compat_attributes - nf_tables rule compat attributes + * + * @NFTA_RULE_COMPAT_PROTO: numeric value of handled protocol (NLA_U32) + * @NFTA_RULE_COMPAT_FLAGS: bitmask of enum nft_rule_compat_flags (NLA_U32) + */ +enum nft_rule_compat_attributes { + NFTA_RULE_COMPAT_UNSPEC, + NFTA_RULE_COMPAT_PROTO, + NFTA_RULE_COMPAT_FLAGS, + __NFTA_RULE_COMPAT_MAX +}; +#define NFTA_RULE_COMPAT_MAX (__NFTA_RULE_COMPAT_MAX - 1) + +/** + * enum nft_set_flags - nf_tables set flags + * + * @NFT_SET_ANONYMOUS: name allocation, automatic cleanup on unlink + * @NFT_SET_CONSTANT: set contents may not change while bound + * @NFT_SET_INTERVAL: set contains intervals + * @NFT_SET_MAP: set is used as a dictionary + * @NFT_SET_TIMEOUT: set uses timeouts + * @NFT_SET_EVAL: set can be updated from the evaluation path + * @NFT_SET_OBJECT: set contains stateful objects + * @NFT_SET_CONCAT: set contains a concatenation + * @NFT_SET_EXPR: set contains expressions + */ +enum nft_set_flags { + NFT_SET_ANONYMOUS = 0x1, + NFT_SET_CONSTANT = 0x2, + NFT_SET_INTERVAL = 0x4, + NFT_SET_MAP = 0x8, + NFT_SET_TIMEOUT = 0x10, + NFT_SET_EVAL = 0x20, + NFT_SET_OBJECT = 0x40, + NFT_SET_CONCAT = 0x80, + NFT_SET_EXPR = 0x100, +}; + +/** + * enum nft_set_policies - set selection policy + * + * @NFT_SET_POL_PERFORMANCE: prefer high performance over low memory use + * @NFT_SET_POL_MEMORY: prefer low memory use over high performance + */ +enum nft_set_policies { + NFT_SET_POL_PERFORMANCE, + NFT_SET_POL_MEMORY, +}; + +/** + * enum nft_set_desc_attributes - set element description + * + * @NFTA_SET_DESC_SIZE: number of elements in set (NLA_U32) + * @NFTA_SET_DESC_CONCAT: description of field concatenation (NLA_NESTED) + */ +enum nft_set_desc_attributes { + NFTA_SET_DESC_UNSPEC, + NFTA_SET_DESC_SIZE, + NFTA_SET_DESC_CONCAT, + __NFTA_SET_DESC_MAX +}; +#define NFTA_SET_DESC_MAX (__NFTA_SET_DESC_MAX - 1) + +/** + * enum nft_set_field_attributes - attributes of concatenated fields + * + * @NFTA_SET_FIELD_LEN: length of single field, in bits (NLA_U32) + */ +enum nft_set_field_attributes { + NFTA_SET_FIELD_UNSPEC, + NFTA_SET_FIELD_LEN, + __NFTA_SET_FIELD_MAX +}; +#define NFTA_SET_FIELD_MAX (__NFTA_SET_FIELD_MAX - 1) + +/** + * enum nft_set_attributes - nf_tables set netlink attributes + * + * @NFTA_SET_TABLE: table name (NLA_STRING) + * @NFTA_SET_NAME: set name (NLA_STRING) + * @NFTA_SET_FLAGS: bitmask of enum nft_set_flags (NLA_U32) + * @NFTA_SET_KEY_TYPE: key data type, informational purpose only (NLA_U32) + * @NFTA_SET_KEY_LEN: key data length (NLA_U32) + * @NFTA_SET_DATA_TYPE: mapping data type (NLA_U32) + * @NFTA_SET_DATA_LEN: mapping data length (NLA_U32) + * @NFTA_SET_POLICY: selection policy (NLA_U32) + * @NFTA_SET_DESC: set description (NLA_NESTED) + * @NFTA_SET_ID: uniquely identifies a set in a transaction (NLA_U32) + * @NFTA_SET_TIMEOUT: default timeout value (NLA_U64) + * @NFTA_SET_GC_INTERVAL: garbage collection interval (NLA_U32) + * @NFTA_SET_USERDATA: user data (NLA_BINARY) + * @NFTA_SET_OBJ_TYPE: stateful object type (NLA_U32: NFT_OBJECT_*) + * @NFTA_SET_HANDLE: set handle (NLA_U64) + * @NFTA_SET_EXPR: set expression (NLA_NESTED: nft_expr_attributes) + * @NFTA_SET_EXPRESSIONS: list of expressions (NLA_NESTED: nft_list_attributes) + */ +enum nft_set_attributes { + NFTA_SET_UNSPEC, + NFTA_SET_TABLE, + NFTA_SET_NAME, + NFTA_SET_FLAGS, + NFTA_SET_KEY_TYPE, + NFTA_SET_KEY_LEN, + NFTA_SET_DATA_TYPE, + NFTA_SET_DATA_LEN, + NFTA_SET_POLICY, + NFTA_SET_DESC, + NFTA_SET_ID, + NFTA_SET_TIMEOUT, + NFTA_SET_GC_INTERVAL, + NFTA_SET_USERDATA, + NFTA_SET_PAD, + NFTA_SET_OBJ_TYPE, + NFTA_SET_HANDLE, + NFTA_SET_EXPR, + NFTA_SET_EXPRESSIONS, + __NFTA_SET_MAX +}; +#define NFTA_SET_MAX (__NFTA_SET_MAX - 1) + +/** + * enum nft_set_elem_flags - nf_tables set element flags + * + * @NFT_SET_ELEM_INTERVAL_END: element ends the previous interval + * @NFT_SET_ELEM_CATCHALL: special catch-all element + */ +enum nft_set_elem_flags { + NFT_SET_ELEM_INTERVAL_END = 0x1, + NFT_SET_ELEM_CATCHALL = 0x2, +}; + +/** + * enum nft_set_elem_attributes - nf_tables set element netlink attributes + * + * @NFTA_SET_ELEM_KEY: key value (NLA_NESTED: nft_data) + * @NFTA_SET_ELEM_DATA: data value of mapping (NLA_NESTED: nft_data_attributes) + * @NFTA_SET_ELEM_FLAGS: bitmask of nft_set_elem_flags (NLA_U32) + * @NFTA_SET_ELEM_TIMEOUT: timeout value (NLA_U64) + * @NFTA_SET_ELEM_EXPIRATION: expiration time (NLA_U64) + * @NFTA_SET_ELEM_USERDATA: user data (NLA_BINARY) + * @NFTA_SET_ELEM_EXPR: expression (NLA_NESTED: nft_expr_attributes) + * @NFTA_SET_ELEM_OBJREF: stateful object reference (NLA_STRING) + * @NFTA_SET_ELEM_KEY_END: closing key value (NLA_NESTED: nft_data) + * @NFTA_SET_ELEM_EXPRESSIONS: list of expressions (NLA_NESTED: nft_list_attributes) + */ +enum nft_set_elem_attributes { + NFTA_SET_ELEM_UNSPEC, + NFTA_SET_ELEM_KEY, + NFTA_SET_ELEM_DATA, + NFTA_SET_ELEM_FLAGS, + NFTA_SET_ELEM_TIMEOUT, + NFTA_SET_ELEM_EXPIRATION, + NFTA_SET_ELEM_USERDATA, + NFTA_SET_ELEM_EXPR, + NFTA_SET_ELEM_PAD, + NFTA_SET_ELEM_OBJREF, + NFTA_SET_ELEM_KEY_END, + NFTA_SET_ELEM_EXPRESSIONS, + __NFTA_SET_ELEM_MAX +}; +#define NFTA_SET_ELEM_MAX (__NFTA_SET_ELEM_MAX - 1) + +/** + * enum nft_set_elem_list_attributes - nf_tables set element list netlink attributes + * + * @NFTA_SET_ELEM_LIST_TABLE: table of the set to be changed (NLA_STRING) + * @NFTA_SET_ELEM_LIST_SET: name of the set to be changed (NLA_STRING) + * @NFTA_SET_ELEM_LIST_ELEMENTS: list of set elements (NLA_NESTED: nft_set_elem_attributes) + * @NFTA_SET_ELEM_LIST_SET_ID: uniquely identifies a set in a transaction (NLA_U32) + */ +enum nft_set_elem_list_attributes { + NFTA_SET_ELEM_LIST_UNSPEC, + NFTA_SET_ELEM_LIST_TABLE, + NFTA_SET_ELEM_LIST_SET, + NFTA_SET_ELEM_LIST_ELEMENTS, + NFTA_SET_ELEM_LIST_SET_ID, + __NFTA_SET_ELEM_LIST_MAX +}; +#define NFTA_SET_ELEM_LIST_MAX (__NFTA_SET_ELEM_LIST_MAX - 1) + +/** + * enum nft_data_types - nf_tables data types + * + * @NFT_DATA_VALUE: generic data + * @NFT_DATA_VERDICT: netfilter verdict + * + * The type of data is usually determined by the kernel directly and is not + * explicitly specified by userspace. The only difference are sets, where + * userspace specifies the key and mapping data types. + * + * The values 0xffffff00-0xffffffff are reserved for internally used types. + * The remaining range can be freely used by userspace to encode types, all + * values are equivalent to NFT_DATA_VALUE. + */ +enum nft_data_types { + NFT_DATA_VALUE, + NFT_DATA_VERDICT = 0xffffff00U, +}; + +#define NFT_DATA_RESERVED_MASK 0xffffff00U + +/** + * enum nft_data_attributes - nf_tables data netlink attributes + * + * @NFTA_DATA_VALUE: generic data (NLA_BINARY) + * @NFTA_DATA_VERDICT: nf_tables verdict (NLA_NESTED: nft_verdict_attributes) + */ +enum nft_data_attributes { + NFTA_DATA_UNSPEC, + NFTA_DATA_VALUE, + NFTA_DATA_VERDICT, + __NFTA_DATA_MAX +}; +#define NFTA_DATA_MAX (__NFTA_DATA_MAX - 1) + +/* Maximum length of a value */ +#define NFT_DATA_VALUE_MAXLEN 64 + +/** + * enum nft_verdict_attributes - nf_tables verdict netlink attributes + * + * @NFTA_VERDICT_CODE: nf_tables verdict (NLA_U32: enum nft_verdicts) + * @NFTA_VERDICT_CHAIN: jump target chain name (NLA_STRING) + * @NFTA_VERDICT_CHAIN_ID: jump target chain ID (NLA_U32) + */ +enum nft_verdict_attributes { + NFTA_VERDICT_UNSPEC, + NFTA_VERDICT_CODE, + NFTA_VERDICT_CHAIN, + NFTA_VERDICT_CHAIN_ID, + __NFTA_VERDICT_MAX +}; +#define NFTA_VERDICT_MAX (__NFTA_VERDICT_MAX - 1) + +/** + * enum nft_expr_attributes - nf_tables expression netlink attributes + * + * @NFTA_EXPR_NAME: name of the expression type (NLA_STRING) + * @NFTA_EXPR_DATA: type specific data (NLA_NESTED) + */ +enum nft_expr_attributes { + NFTA_EXPR_UNSPEC, + NFTA_EXPR_NAME, + NFTA_EXPR_DATA, + __NFTA_EXPR_MAX +}; +#define NFTA_EXPR_MAX (__NFTA_EXPR_MAX - 1) + +/** + * enum nft_immediate_attributes - nf_tables immediate expression netlink attributes + * + * @NFTA_IMMEDIATE_DREG: destination register to load data into (NLA_U32) + * @NFTA_IMMEDIATE_DATA: data to load (NLA_NESTED: nft_data_attributes) + */ +enum nft_immediate_attributes { + NFTA_IMMEDIATE_UNSPEC, + NFTA_IMMEDIATE_DREG, + NFTA_IMMEDIATE_DATA, + __NFTA_IMMEDIATE_MAX +}; +#define NFTA_IMMEDIATE_MAX (__NFTA_IMMEDIATE_MAX - 1) + +/** + * enum nft_bitwise_ops - nf_tables bitwise operations + * + * @NFT_BITWISE_BOOL: mask-and-xor operation used to implement NOT, AND, OR and + * XOR boolean operations + * @NFT_BITWISE_LSHIFT: left-shift operation + * @NFT_BITWISE_RSHIFT: right-shift operation + */ +enum nft_bitwise_ops { + NFT_BITWISE_BOOL, + NFT_BITWISE_LSHIFT, + NFT_BITWISE_RSHIFT, +}; + +/** + * enum nft_bitwise_attributes - nf_tables bitwise expression netlink attributes + * + * @NFTA_BITWISE_SREG: source register (NLA_U32: nft_registers) + * @NFTA_BITWISE_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_BITWISE_LEN: length of operands (NLA_U32) + * @NFTA_BITWISE_MASK: mask value (NLA_NESTED: nft_data_attributes) + * @NFTA_BITWISE_XOR: xor value (NLA_NESTED: nft_data_attributes) + * @NFTA_BITWISE_OP: type of operation (NLA_U32: nft_bitwise_ops) + * @NFTA_BITWISE_DATA: argument for non-boolean operations + * (NLA_NESTED: nft_data_attributes) + * + * The bitwise expression supports boolean and shift operations. It implements + * the boolean operations by performing the following operation: + * + * dreg = (sreg & mask) ^ xor + * + * with these mask and xor values: + * + * mask xor + * NOT: 1 1 + * OR: ~x x + * XOR: 1 x + * AND: x 0 + */ +enum nft_bitwise_attributes { + NFTA_BITWISE_UNSPEC, + NFTA_BITWISE_SREG, + NFTA_BITWISE_DREG, + NFTA_BITWISE_LEN, + NFTA_BITWISE_MASK, + NFTA_BITWISE_XOR, + NFTA_BITWISE_OP, + NFTA_BITWISE_DATA, + __NFTA_BITWISE_MAX +}; +#define NFTA_BITWISE_MAX (__NFTA_BITWISE_MAX - 1) + +/** + * enum nft_byteorder_ops - nf_tables byteorder operators + * + * @NFT_BYTEORDER_NTOH: network to host operator + * @NFT_BYTEORDER_HTON: host to network operator + */ +enum nft_byteorder_ops { + NFT_BYTEORDER_NTOH, + NFT_BYTEORDER_HTON, +}; + +/** + * enum nft_byteorder_attributes - nf_tables byteorder expression netlink attributes + * + * @NFTA_BYTEORDER_SREG: source register (NLA_U32: nft_registers) + * @NFTA_BYTEORDER_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_BYTEORDER_OP: operator (NLA_U32: enum nft_byteorder_ops) + * @NFTA_BYTEORDER_LEN: length of the data (NLA_U32) + * @NFTA_BYTEORDER_SIZE: data size in bytes (NLA_U32: 2 or 4) + */ +enum nft_byteorder_attributes { + NFTA_BYTEORDER_UNSPEC, + NFTA_BYTEORDER_SREG, + NFTA_BYTEORDER_DREG, + NFTA_BYTEORDER_OP, + NFTA_BYTEORDER_LEN, + NFTA_BYTEORDER_SIZE, + __NFTA_BYTEORDER_MAX +}; +#define NFTA_BYTEORDER_MAX (__NFTA_BYTEORDER_MAX - 1) + +/** + * enum nft_cmp_ops - nf_tables relational operator + * + * @NFT_CMP_EQ: equal + * @NFT_CMP_NEQ: not equal + * @NFT_CMP_LT: less than + * @NFT_CMP_LTE: less than or equal to + * @NFT_CMP_GT: greater than + * @NFT_CMP_GTE: greater than or equal to + */ +enum nft_cmp_ops { + NFT_CMP_EQ, + NFT_CMP_NEQ, + NFT_CMP_LT, + NFT_CMP_LTE, + NFT_CMP_GT, + NFT_CMP_GTE, +}; + +/** + * enum nft_cmp_attributes - nf_tables cmp expression netlink attributes + * + * @NFTA_CMP_SREG: source register of data to compare (NLA_U32: nft_registers) + * @NFTA_CMP_OP: cmp operation (NLA_U32: nft_cmp_ops) + * @NFTA_CMP_DATA: data to compare against (NLA_NESTED: nft_data_attributes) + */ +enum nft_cmp_attributes { + NFTA_CMP_UNSPEC, + NFTA_CMP_SREG, + NFTA_CMP_OP, + NFTA_CMP_DATA, + __NFTA_CMP_MAX +}; +#define NFTA_CMP_MAX (__NFTA_CMP_MAX - 1) + +/** + * enum nft_range_ops - nf_tables range operator + * + * @NFT_RANGE_EQ: equal + * @NFT_RANGE_NEQ: not equal + */ +enum nft_range_ops { + NFT_RANGE_EQ, + NFT_RANGE_NEQ, +}; + +/** + * enum nft_range_attributes - nf_tables range expression netlink attributes + * + * @NFTA_RANGE_SREG: source register of data to compare (NLA_U32: nft_registers) + * @NFTA_RANGE_OP: cmp operation (NLA_U32: nft_cmp_ops) + * @NFTA_RANGE_FROM_DATA: data range from (NLA_NESTED: nft_data_attributes) + * @NFTA_RANGE_TO_DATA: data range to (NLA_NESTED: nft_data_attributes) + */ +enum nft_range_attributes { + NFTA_RANGE_UNSPEC, + NFTA_RANGE_SREG, + NFTA_RANGE_OP, + NFTA_RANGE_FROM_DATA, + NFTA_RANGE_TO_DATA, + __NFTA_RANGE_MAX +}; +#define NFTA_RANGE_MAX (__NFTA_RANGE_MAX - 1) + +enum nft_lookup_flags { + NFT_LOOKUP_F_INV = (1 << 0), +}; + +/** + * enum nft_lookup_attributes - nf_tables set lookup expression netlink attributes + * + * @NFTA_LOOKUP_SET: name of the set where to look for (NLA_STRING) + * @NFTA_LOOKUP_SREG: source register of the data to look for (NLA_U32: nft_registers) + * @NFTA_LOOKUP_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_LOOKUP_SET_ID: uniquely identifies a set in a transaction (NLA_U32) + * @NFTA_LOOKUP_FLAGS: flags (NLA_U32: enum nft_lookup_flags) + */ +enum nft_lookup_attributes { + NFTA_LOOKUP_UNSPEC, + NFTA_LOOKUP_SET, + NFTA_LOOKUP_SREG, + NFTA_LOOKUP_DREG, + NFTA_LOOKUP_SET_ID, + NFTA_LOOKUP_FLAGS, + __NFTA_LOOKUP_MAX +}; +#define NFTA_LOOKUP_MAX (__NFTA_LOOKUP_MAX - 1) + +enum nft_dynset_ops { + NFT_DYNSET_OP_ADD, + NFT_DYNSET_OP_UPDATE, + NFT_DYNSET_OP_DELETE, +}; + +enum nft_dynset_flags { + NFT_DYNSET_F_INV = (1 << 0), + NFT_DYNSET_F_EXPR = (1 << 1), +}; + +/** + * enum nft_dynset_attributes - dynset expression attributes + * + * @NFTA_DYNSET_SET_NAME: name of set the to add data to (NLA_STRING) + * @NFTA_DYNSET_SET_ID: uniquely identifier of the set in the transaction (NLA_U32) + * @NFTA_DYNSET_OP: operation (NLA_U32) + * @NFTA_DYNSET_SREG_KEY: source register of the key (NLA_U32) + * @NFTA_DYNSET_SREG_DATA: source register of the data (NLA_U32) + * @NFTA_DYNSET_TIMEOUT: timeout value for the new element (NLA_U64) + * @NFTA_DYNSET_EXPR: expression (NLA_NESTED: nft_expr_attributes) + * @NFTA_DYNSET_FLAGS: flags (NLA_U32) + * @NFTA_DYNSET_EXPRESSIONS: list of expressions (NLA_NESTED: nft_list_attributes) + */ +enum nft_dynset_attributes { + NFTA_DYNSET_UNSPEC, + NFTA_DYNSET_SET_NAME, + NFTA_DYNSET_SET_ID, + NFTA_DYNSET_OP, + NFTA_DYNSET_SREG_KEY, + NFTA_DYNSET_SREG_DATA, + NFTA_DYNSET_TIMEOUT, + NFTA_DYNSET_EXPR, + NFTA_DYNSET_PAD, + NFTA_DYNSET_FLAGS, + NFTA_DYNSET_EXPRESSIONS, + __NFTA_DYNSET_MAX, +}; +#define NFTA_DYNSET_MAX (__NFTA_DYNSET_MAX - 1) + +/** + * enum nft_payload_bases - nf_tables payload expression offset bases + * + * @NFT_PAYLOAD_LL_HEADER: link layer header + * @NFT_PAYLOAD_NETWORK_HEADER: network header + * @NFT_PAYLOAD_TRANSPORT_HEADER: transport header + * @NFT_PAYLOAD_INNER_HEADER: inner header / payload + */ +enum nft_payload_bases { + NFT_PAYLOAD_LL_HEADER, + NFT_PAYLOAD_NETWORK_HEADER, + NFT_PAYLOAD_TRANSPORT_HEADER, + NFT_PAYLOAD_INNER_HEADER, + NFT_PAYLOAD_TUN_HEADER, +}; + +/** + * enum nft_payload_csum_types - nf_tables payload expression checksum types + * + * @NFT_PAYLOAD_CSUM_NONE: no checksumming + * @NFT_PAYLOAD_CSUM_INET: internet checksum (RFC 791) + * @NFT_PAYLOAD_CSUM_SCTP: CRC-32c, for use in SCTP header (RFC 3309) + */ +enum nft_payload_csum_types { + NFT_PAYLOAD_CSUM_NONE, + NFT_PAYLOAD_CSUM_INET, + NFT_PAYLOAD_CSUM_SCTP, +}; + +enum nft_payload_csum_flags { + NFT_PAYLOAD_L4CSUM_PSEUDOHDR = (1 << 0), +}; + +enum nft_inner_type { + NFT_INNER_UNSPEC = 0, + NFT_INNER_VXLAN, + NFT_INNER_GENEVE, +}; + +enum nft_inner_flags { + NFT_INNER_HDRSIZE = (1 << 0), + NFT_INNER_LL = (1 << 1), + NFT_INNER_NH = (1 << 2), + NFT_INNER_TH = (1 << 3), +}; +#define NFT_INNER_MASK (NFT_INNER_HDRSIZE | NFT_INNER_LL | \ + NFT_INNER_NH | NFT_INNER_TH) + +enum nft_inner_attributes { + NFTA_INNER_UNSPEC, + NFTA_INNER_NUM, + NFTA_INNER_TYPE, + NFTA_INNER_FLAGS, + NFTA_INNER_HDRSIZE, + NFTA_INNER_EXPR, + __NFTA_INNER_MAX +}; +#define NFTA_INNER_MAX (__NFTA_INNER_MAX - 1) + +/** + * enum nft_payload_attributes - nf_tables payload expression netlink attributes + * + * @NFTA_PAYLOAD_DREG: destination register to load data into (NLA_U32: nft_registers) + * @NFTA_PAYLOAD_BASE: payload base (NLA_U32: nft_payload_bases) + * @NFTA_PAYLOAD_OFFSET: payload offset relative to base (NLA_U32) + * @NFTA_PAYLOAD_LEN: payload length (NLA_U32) + * @NFTA_PAYLOAD_SREG: source register to load data from (NLA_U32: nft_registers) + * @NFTA_PAYLOAD_CSUM_TYPE: checksum type (NLA_U32) + * @NFTA_PAYLOAD_CSUM_OFFSET: checksum offset relative to base (NLA_U32) + * @NFTA_PAYLOAD_CSUM_FLAGS: checksum flags (NLA_U32) + */ +enum nft_payload_attributes { + NFTA_PAYLOAD_UNSPEC, + NFTA_PAYLOAD_DREG, + NFTA_PAYLOAD_BASE, + NFTA_PAYLOAD_OFFSET, + NFTA_PAYLOAD_LEN, + NFTA_PAYLOAD_SREG, + NFTA_PAYLOAD_CSUM_TYPE, + NFTA_PAYLOAD_CSUM_OFFSET, + NFTA_PAYLOAD_CSUM_FLAGS, + __NFTA_PAYLOAD_MAX +}; +#define NFTA_PAYLOAD_MAX (__NFTA_PAYLOAD_MAX - 1) + +enum nft_exthdr_flags { + NFT_EXTHDR_F_PRESENT = (1 << 0), +}; + +/** + * enum nft_exthdr_op - nf_tables match options + * + * @NFT_EXTHDR_OP_IPV6: match against ipv6 extension headers + * @NFT_EXTHDR_OP_TCP: match against tcp options + * @NFT_EXTHDR_OP_IPV4: match against ipv4 options + * @NFT_EXTHDR_OP_SCTP: match against sctp chunks + */ +enum nft_exthdr_op { + NFT_EXTHDR_OP_IPV6, + NFT_EXTHDR_OP_TCPOPT, + NFT_EXTHDR_OP_IPV4, + NFT_EXTHDR_OP_SCTP, + __NFT_EXTHDR_OP_MAX +}; +#define NFT_EXTHDR_OP_MAX (__NFT_EXTHDR_OP_MAX - 1) + +/** + * enum nft_exthdr_attributes - nf_tables extension header expression netlink attributes + * + * @NFTA_EXTHDR_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_EXTHDR_TYPE: extension header type (NLA_U8) + * @NFTA_EXTHDR_OFFSET: extension header offset (NLA_U32) + * @NFTA_EXTHDR_LEN: extension header length (NLA_U32) + * @NFTA_EXTHDR_FLAGS: extension header flags (NLA_U32) + * @NFTA_EXTHDR_OP: option match type (NLA_U32) + * @NFTA_EXTHDR_SREG: option match type (NLA_U32) + */ +enum nft_exthdr_attributes { + NFTA_EXTHDR_UNSPEC, + NFTA_EXTHDR_DREG, + NFTA_EXTHDR_TYPE, + NFTA_EXTHDR_OFFSET, + NFTA_EXTHDR_LEN, + NFTA_EXTHDR_FLAGS, + NFTA_EXTHDR_OP, + NFTA_EXTHDR_SREG, + __NFTA_EXTHDR_MAX +}; +#define NFTA_EXTHDR_MAX (__NFTA_EXTHDR_MAX - 1) + +/** + * enum nft_meta_keys - nf_tables meta expression keys + * + * @NFT_META_LEN: packet length (skb->len) + * @NFT_META_PROTOCOL: packet ethertype protocol (skb->protocol), invalid in OUTPUT + * @NFT_META_PRIORITY: packet priority (skb->priority) + * @NFT_META_MARK: packet mark (skb->mark) + * @NFT_META_IIF: packet input interface index (dev->ifindex) + * @NFT_META_OIF: packet output interface index (dev->ifindex) + * @NFT_META_IIFNAME: packet input interface name (dev->name) + * @NFT_META_OIFNAME: packet output interface name (dev->name) + * @NFT_META_IIFTYPE: packet input interface type (dev->type) + * @NFT_META_OIFTYPE: packet output interface type (dev->type) + * @NFT_META_SKUID: originating socket UID (fsuid) + * @NFT_META_SKGID: originating socket GID (fsgid) + * @NFT_META_NFTRACE: packet nftrace bit + * @NFT_META_RTCLASSID: realm value of packet's route (skb->dst->tclassid) + * @NFT_META_SECMARK: packet secmark (skb->secmark) + * @NFT_META_NFPROTO: netfilter protocol + * @NFT_META_L4PROTO: layer 4 protocol number + * @NFT_META_BRI_IIFNAME: packet input bridge interface name + * @NFT_META_BRI_OIFNAME: packet output bridge interface name + * @NFT_META_PKTTYPE: packet type (skb->pkt_type), special handling for loopback + * @NFT_META_CPU: cpu id through smp_processor_id() + * @NFT_META_IIFGROUP: packet input interface group + * @NFT_META_OIFGROUP: packet output interface group + * @NFT_META_CGROUP: socket control group (skb->sk->sk_classid) + * @NFT_META_PRANDOM: a 32bit pseudo-random number + * @NFT_META_SECPATH: boolean, secpath_exists (!!skb->sp) + * @NFT_META_IIFKIND: packet input interface kind name (dev->rtnl_link_ops->kind) + * @NFT_META_OIFKIND: packet output interface kind name (dev->rtnl_link_ops->kind) + * @NFT_META_BRI_IIFPVID: packet input bridge port pvid + * @NFT_META_BRI_IIFVPROTO: packet input bridge vlan proto + * @NFT_META_TIME_NS: time since epoch (in nanoseconds) + * @NFT_META_TIME_DAY: day of week (from 0 = Sunday to 6 = Saturday) + * @NFT_META_TIME_HOUR: hour of day (in seconds) + * @NFT_META_SDIF: slave device interface index + * @NFT_META_SDIFNAME: slave device interface name + */ +enum nft_meta_keys { + NFT_META_LEN, + NFT_META_PROTOCOL, + NFT_META_PRIORITY, + NFT_META_MARK, + NFT_META_IIF, + NFT_META_OIF, + NFT_META_IIFNAME, + NFT_META_OIFNAME, + NFT_META_IFTYPE, +#define NFT_META_IIFTYPE NFT_META_IFTYPE + NFT_META_OIFTYPE, + NFT_META_SKUID, + NFT_META_SKGID, + NFT_META_NFTRACE, + NFT_META_RTCLASSID, + NFT_META_SECMARK, + NFT_META_NFPROTO, + NFT_META_L4PROTO, + NFT_META_BRI_IIFNAME, + NFT_META_BRI_OIFNAME, + NFT_META_PKTTYPE, + NFT_META_CPU, + NFT_META_IIFGROUP, + NFT_META_OIFGROUP, + NFT_META_CGROUP, + NFT_META_PRANDOM, + NFT_META_SECPATH, + NFT_META_IIFKIND, + NFT_META_OIFKIND, + NFT_META_BRI_IIFPVID, + NFT_META_BRI_IIFVPROTO, + NFT_META_TIME_NS, + NFT_META_TIME_DAY, + NFT_META_TIME_HOUR, + NFT_META_SDIF, + NFT_META_SDIFNAME, + __NFT_META_IIFTYPE, +}; + +/** + * enum nft_rt_keys - nf_tables routing expression keys + * + * @NFT_RT_CLASSID: realm value of packet's route (skb->dst->tclassid) + * @NFT_RT_NEXTHOP4: routing nexthop for IPv4 + * @NFT_RT_NEXTHOP6: routing nexthop for IPv6 + * @NFT_RT_TCPMSS: fetch current path tcp mss + * @NFT_RT_XFRM: boolean, skb->dst->xfrm != NULL + */ +enum nft_rt_keys { + NFT_RT_CLASSID, + NFT_RT_NEXTHOP4, + NFT_RT_NEXTHOP6, + NFT_RT_TCPMSS, + NFT_RT_XFRM, + __NFT_RT_MAX +}; +#define NFT_RT_MAX (__NFT_RT_MAX - 1) + +/** + * enum nft_hash_types - nf_tables hash expression types + * + * @NFT_HASH_JENKINS: Jenkins Hash + * @NFT_HASH_SYM: Symmetric Hash + */ +enum nft_hash_types { + NFT_HASH_JENKINS, + NFT_HASH_SYM, +}; + +/** + * enum nft_hash_attributes - nf_tables hash expression netlink attributes + * + * @NFTA_HASH_SREG: source register (NLA_U32) + * @NFTA_HASH_DREG: destination register (NLA_U32) + * @NFTA_HASH_LEN: source data length (NLA_U32) + * @NFTA_HASH_MODULUS: modulus value (NLA_U32) + * @NFTA_HASH_SEED: seed value (NLA_U32) + * @NFTA_HASH_OFFSET: add this offset value to hash result (NLA_U32) + * @NFTA_HASH_TYPE: hash operation (NLA_U32: nft_hash_types) + * @NFTA_HASH_SET_NAME: name of the map to lookup (NLA_STRING) + * @NFTA_HASH_SET_ID: id of the map (NLA_U32) + */ +enum nft_hash_attributes { + NFTA_HASH_UNSPEC, + NFTA_HASH_SREG, + NFTA_HASH_DREG, + NFTA_HASH_LEN, + NFTA_HASH_MODULUS, + NFTA_HASH_SEED, + NFTA_HASH_OFFSET, + NFTA_HASH_TYPE, + NFTA_HASH_SET_NAME, /* deprecated */ + NFTA_HASH_SET_ID, /* deprecated */ + __NFTA_HASH_MAX, +}; +#define NFTA_HASH_MAX (__NFTA_HASH_MAX - 1) + +/** + * enum nft_meta_attributes - nf_tables meta expression netlink attributes + * + * @NFTA_META_DREG: destination register (NLA_U32) + * @NFTA_META_KEY: meta data item to load (NLA_U32: nft_meta_keys) + * @NFTA_META_SREG: source register (NLA_U32) + */ +enum nft_meta_attributes { + NFTA_META_UNSPEC, + NFTA_META_DREG, + NFTA_META_KEY, + NFTA_META_SREG, + __NFTA_META_MAX +}; +#define NFTA_META_MAX (__NFTA_META_MAX - 1) + +/** + * enum nft_rt_attributes - nf_tables routing expression netlink attributes + * + * @NFTA_RT_DREG: destination register (NLA_U32) + * @NFTA_RT_KEY: routing data item to load (NLA_U32: nft_rt_keys) + */ +enum nft_rt_attributes { + NFTA_RT_UNSPEC, + NFTA_RT_DREG, + NFTA_RT_KEY, + __NFTA_RT_MAX +}; +#define NFTA_RT_MAX (__NFTA_RT_MAX - 1) + +/** + * enum nft_socket_attributes - nf_tables socket expression netlink attributes + * + * @NFTA_SOCKET_KEY: socket key to match + * @NFTA_SOCKET_DREG: destination register + * @NFTA_SOCKET_LEVEL: cgroups2 ancestor level (only for cgroupsv2) + */ +enum nft_socket_attributes { + NFTA_SOCKET_UNSPEC, + NFTA_SOCKET_KEY, + NFTA_SOCKET_DREG, + NFTA_SOCKET_LEVEL, + __NFTA_SOCKET_MAX +}; +#define NFTA_SOCKET_MAX (__NFTA_SOCKET_MAX - 1) + +/* + * enum nft_socket_keys - nf_tables socket expression keys + * + * @NFT_SOCKET_TRANSPARENT: Value of the IP(V6)_TRANSPARENT socket option + * @NFT_SOCKET_MARK: Value of the socket mark + * @NFT_SOCKET_WILDCARD: Whether the socket is zero-bound (e.g. 0.0.0.0 or ::0) + * @NFT_SOCKET_CGROUPV2: Match on cgroups version 2 + */ +enum nft_socket_keys { + NFT_SOCKET_TRANSPARENT, + NFT_SOCKET_MARK, + NFT_SOCKET_WILDCARD, + NFT_SOCKET_CGROUPV2, + __NFT_SOCKET_MAX +}; +#define NFT_SOCKET_MAX (__NFT_SOCKET_MAX - 1) + +/** + * enum nft_ct_keys - nf_tables ct expression keys + * + * @NFT_CT_STATE: conntrack state (bitmask of enum ip_conntrack_info) + * @NFT_CT_DIRECTION: conntrack direction (enum ip_conntrack_dir) + * @NFT_CT_STATUS: conntrack status (bitmask of enum ip_conntrack_status) + * @NFT_CT_MARK: conntrack mark value + * @NFT_CT_SECMARK: conntrack secmark value + * @NFT_CT_EXPIRATION: relative conntrack expiration time in ms + * @NFT_CT_HELPER: connection tracking helper assigned to conntrack + * @NFT_CT_L3PROTOCOL: conntrack layer 3 protocol + * @NFT_CT_SRC: conntrack layer 3 protocol source (IPv4/IPv6 address, deprecated) + * @NFT_CT_DST: conntrack layer 3 protocol destination (IPv4/IPv6 address, deprecated) + * @NFT_CT_PROTOCOL: conntrack layer 4 protocol + * @NFT_CT_PROTO_SRC: conntrack layer 4 protocol source + * @NFT_CT_PROTO_DST: conntrack layer 4 protocol destination + * @NFT_CT_LABELS: conntrack labels + * @NFT_CT_PKTS: conntrack packets + * @NFT_CT_BYTES: conntrack bytes + * @NFT_CT_AVGPKT: conntrack average bytes per packet + * @NFT_CT_ZONE: conntrack zone + * @NFT_CT_EVENTMASK: ctnetlink events to be generated for this conntrack + * @NFT_CT_SRC_IP: conntrack layer 3 protocol source (IPv4 address) + * @NFT_CT_DST_IP: conntrack layer 3 protocol destination (IPv4 address) + * @NFT_CT_SRC_IP6: conntrack layer 3 protocol source (IPv6 address) + * @NFT_CT_DST_IP6: conntrack layer 3 protocol destination (IPv6 address) + * @NFT_CT_ID: conntrack id + */ +enum nft_ct_keys { + NFT_CT_STATE, + NFT_CT_DIRECTION, + NFT_CT_STATUS, + NFT_CT_MARK, + NFT_CT_SECMARK, + NFT_CT_EXPIRATION, + NFT_CT_HELPER, + NFT_CT_L3PROTOCOL, + NFT_CT_SRC, + NFT_CT_DST, + NFT_CT_PROTOCOL, + NFT_CT_PROTO_SRC, + NFT_CT_PROTO_DST, + NFT_CT_LABELS, + NFT_CT_PKTS, + NFT_CT_BYTES, + NFT_CT_AVGPKT, + NFT_CT_ZONE, + NFT_CT_EVENTMASK, + NFT_CT_SRC_IP, + NFT_CT_DST_IP, + NFT_CT_SRC_IP6, + NFT_CT_DST_IP6, + NFT_CT_ID, + __NFT_CT_MAX +}; +#define NFT_CT_MAX (__NFT_CT_MAX - 1) + +/** + * enum nft_ct_attributes - nf_tables ct expression netlink attributes + * + * @NFTA_CT_DREG: destination register (NLA_U32) + * @NFTA_CT_KEY: conntrack data item to load (NLA_U32: nft_ct_keys) + * @NFTA_CT_DIRECTION: direction in case of directional keys (NLA_U8) + * @NFTA_CT_SREG: source register (NLA_U32) + */ +enum nft_ct_attributes { + NFTA_CT_UNSPEC, + NFTA_CT_DREG, + NFTA_CT_KEY, + NFTA_CT_DIRECTION, + NFTA_CT_SREG, + __NFTA_CT_MAX +}; +#define NFTA_CT_MAX (__NFTA_CT_MAX - 1) + +/** + * enum nft_flow_attributes - ct offload expression attributes + * @NFTA_FLOW_TABLE_NAME: flow table name (NLA_STRING) + */ +enum nft_offload_attributes { + NFTA_FLOW_UNSPEC, + NFTA_FLOW_TABLE_NAME, + __NFTA_FLOW_MAX, +}; +#define NFTA_FLOW_MAX (__NFTA_FLOW_MAX - 1) + +enum nft_limit_type { + NFT_LIMIT_PKTS, + NFT_LIMIT_PKT_BYTES +}; + +enum nft_limit_flags { + NFT_LIMIT_F_INV = (1 << 0), +}; + +/** + * enum nft_limit_attributes - nf_tables limit expression netlink attributes + * + * @NFTA_LIMIT_RATE: refill rate (NLA_U64) + * @NFTA_LIMIT_UNIT: refill unit (NLA_U64) + * @NFTA_LIMIT_BURST: burst (NLA_U32) + * @NFTA_LIMIT_TYPE: type of limit (NLA_U32: enum nft_limit_type) + * @NFTA_LIMIT_FLAGS: flags (NLA_U32: enum nft_limit_flags) + */ +enum nft_limit_attributes { + NFTA_LIMIT_UNSPEC, + NFTA_LIMIT_RATE, + NFTA_LIMIT_UNIT, + NFTA_LIMIT_BURST, + NFTA_LIMIT_TYPE, + NFTA_LIMIT_FLAGS, + NFTA_LIMIT_PAD, + __NFTA_LIMIT_MAX +}; +#define NFTA_LIMIT_MAX (__NFTA_LIMIT_MAX - 1) + +enum nft_connlimit_flags { + NFT_CONNLIMIT_F_INV = (1 << 0), +}; + +/** + * enum nft_connlimit_attributes - nf_tables connlimit expression netlink attributes + * + * @NFTA_CONNLIMIT_COUNT: number of connections (NLA_U32) + * @NFTA_CONNLIMIT_FLAGS: flags (NLA_U32: enum nft_connlimit_flags) + */ +enum nft_connlimit_attributes { + NFTA_CONNLIMIT_UNSPEC, + NFTA_CONNLIMIT_COUNT, + NFTA_CONNLIMIT_FLAGS, + __NFTA_CONNLIMIT_MAX +}; +#define NFTA_CONNLIMIT_MAX (__NFTA_CONNLIMIT_MAX - 1) + +/** + * enum nft_counter_attributes - nf_tables counter expression netlink attributes + * + * @NFTA_COUNTER_BYTES: number of bytes (NLA_U64) + * @NFTA_COUNTER_PACKETS: number of packets (NLA_U64) + */ +enum nft_counter_attributes { + NFTA_COUNTER_UNSPEC, + NFTA_COUNTER_BYTES, + NFTA_COUNTER_PACKETS, + NFTA_COUNTER_PAD, + __NFTA_COUNTER_MAX +}; +#define NFTA_COUNTER_MAX (__NFTA_COUNTER_MAX - 1) + +/** + * enum nft_last_attributes - nf_tables last expression netlink attributes + * + * @NFTA_LAST_SET: last update has been set, zero means never updated (NLA_U32) + * @NFTA_LAST_MSECS: milliseconds since last update (NLA_U64) + */ +enum nft_last_attributes { + NFTA_LAST_UNSPEC, + NFTA_LAST_SET, + NFTA_LAST_MSECS, + NFTA_LAST_PAD, + __NFTA_LAST_MAX +}; +#define NFTA_LAST_MAX (__NFTA_LAST_MAX - 1) + +/** + * enum nft_log_attributes - nf_tables log expression netlink attributes + * + * @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U32) + * @NFTA_LOG_PREFIX: prefix to prepend to log messages (NLA_STRING) + * @NFTA_LOG_SNAPLEN: length of payload to include in netlink message (NLA_U32) + * @NFTA_LOG_QTHRESHOLD: queue threshold (NLA_U32) + * @NFTA_LOG_LEVEL: log level (NLA_U32) + * @NFTA_LOG_FLAGS: logging flags (NLA_U32) + */ +enum nft_log_attributes { + NFTA_LOG_UNSPEC, + NFTA_LOG_GROUP, + NFTA_LOG_PREFIX, + NFTA_LOG_SNAPLEN, + NFTA_LOG_QTHRESHOLD, + NFTA_LOG_LEVEL, + NFTA_LOG_FLAGS, + __NFTA_LOG_MAX +}; +#define NFTA_LOG_MAX (__NFTA_LOG_MAX - 1) + +/** + * enum nft_log_level - nf_tables log levels + * + * @NFT_LOGLEVEL_EMERG: system is unusable + * @NFT_LOGLEVEL_ALERT: action must be taken immediately + * @NFT_LOGLEVEL_CRIT: critical conditions + * @NFT_LOGLEVEL_ERR: error conditions + * @NFT_LOGLEVEL_WARNING: warning conditions + * @NFT_LOGLEVEL_NOTICE: normal but significant condition + * @NFT_LOGLEVEL_INFO: informational + * @NFT_LOGLEVEL_DEBUG: debug-level messages + * @NFT_LOGLEVEL_AUDIT: enabling audit logging + */ +enum nft_log_level { + NFT_LOGLEVEL_EMERG, + NFT_LOGLEVEL_ALERT, + NFT_LOGLEVEL_CRIT, + NFT_LOGLEVEL_ERR, + NFT_LOGLEVEL_WARNING, + NFT_LOGLEVEL_NOTICE, + NFT_LOGLEVEL_INFO, + NFT_LOGLEVEL_DEBUG, + NFT_LOGLEVEL_AUDIT, + __NFT_LOGLEVEL_MAX +}; +#define NFT_LOGLEVEL_MAX (__NFT_LOGLEVEL_MAX - 1) + +/** + * enum nft_queue_attributes - nf_tables queue expression netlink attributes + * + * @NFTA_QUEUE_NUM: netlink queue to send messages to (NLA_U16) + * @NFTA_QUEUE_TOTAL: number of queues to load balance packets on (NLA_U16) + * @NFTA_QUEUE_FLAGS: various flags (NLA_U16) + * @NFTA_QUEUE_SREG_QNUM: source register of queue number (NLA_U32: nft_registers) + */ +enum nft_queue_attributes { + NFTA_QUEUE_UNSPEC, + NFTA_QUEUE_NUM, + NFTA_QUEUE_TOTAL, + NFTA_QUEUE_FLAGS, + NFTA_QUEUE_SREG_QNUM, + __NFTA_QUEUE_MAX +}; +#define NFTA_QUEUE_MAX (__NFTA_QUEUE_MAX - 1) + +#define NFT_QUEUE_FLAG_BYPASS 0x01 /* for compatibility with v2 */ +#define NFT_QUEUE_FLAG_CPU_FANOUT 0x02 /* use current CPU (no hashing) */ +#define NFT_QUEUE_FLAG_MASK 0x03 + +enum nft_quota_flags { + NFT_QUOTA_F_INV = (1 << 0), + NFT_QUOTA_F_DEPLETED = (1 << 1), +}; + +/** + * enum nft_quota_attributes - nf_tables quota expression netlink attributes + * + * @NFTA_QUOTA_BYTES: quota in bytes (NLA_U16) + * @NFTA_QUOTA_FLAGS: flags (NLA_U32) + * @NFTA_QUOTA_CONSUMED: quota already consumed in bytes (NLA_U64) + */ +enum nft_quota_attributes { + NFTA_QUOTA_UNSPEC, + NFTA_QUOTA_BYTES, + NFTA_QUOTA_FLAGS, + NFTA_QUOTA_PAD, + NFTA_QUOTA_CONSUMED, + __NFTA_QUOTA_MAX +}; +#define NFTA_QUOTA_MAX (__NFTA_QUOTA_MAX - 1) + +/** + * enum nft_secmark_attributes - nf_tables secmark object netlink attributes + * + * @NFTA_SECMARK_CTX: security context (NLA_STRING) + */ +enum nft_secmark_attributes { + NFTA_SECMARK_UNSPEC, + NFTA_SECMARK_CTX, + __NFTA_SECMARK_MAX, +}; +#define NFTA_SECMARK_MAX (__NFTA_SECMARK_MAX - 1) + +/* Max security context length */ +#define NFT_SECMARK_CTX_MAXLEN 256 + +/** + * enum nft_reject_types - nf_tables reject expression reject types + * + * @NFT_REJECT_ICMP_UNREACH: reject using ICMP unreachable + * @NFT_REJECT_TCP_RST: reject using TCP RST + * @NFT_REJECT_ICMPX_UNREACH: abstracted ICMP unreachable for bridge and inet + */ +enum nft_reject_types { + NFT_REJECT_ICMP_UNREACH, + NFT_REJECT_TCP_RST, + NFT_REJECT_ICMPX_UNREACH, +}; + +/** + * enum nft_reject_code - Generic reject codes for IPv4/IPv6 + * + * @NFT_REJECT_ICMPX_NO_ROUTE: no route to host / network unreachable + * @NFT_REJECT_ICMPX_PORT_UNREACH: port unreachable + * @NFT_REJECT_ICMPX_HOST_UNREACH: host unreachable + * @NFT_REJECT_ICMPX_ADMIN_PROHIBITED: administratively prohibited + * + * These codes are mapped to real ICMP and ICMPv6 codes. + */ +enum nft_reject_inet_code { + NFT_REJECT_ICMPX_NO_ROUTE = 0, + NFT_REJECT_ICMPX_PORT_UNREACH, + NFT_REJECT_ICMPX_HOST_UNREACH, + NFT_REJECT_ICMPX_ADMIN_PROHIBITED, + __NFT_REJECT_ICMPX_MAX +}; +#define NFT_REJECT_ICMPX_MAX (__NFT_REJECT_ICMPX_MAX - 1) + +/** + * enum nft_reject_attributes - nf_tables reject expression netlink attributes + * + * @NFTA_REJECT_TYPE: packet type to use (NLA_U32: nft_reject_types) + * @NFTA_REJECT_ICMP_CODE: ICMP code to use (NLA_U8) + */ +enum nft_reject_attributes { + NFTA_REJECT_UNSPEC, + NFTA_REJECT_TYPE, + NFTA_REJECT_ICMP_CODE, + __NFTA_REJECT_MAX +}; +#define NFTA_REJECT_MAX (__NFTA_REJECT_MAX - 1) + +/** + * enum nft_nat_types - nf_tables nat expression NAT types + * + * @NFT_NAT_SNAT: source NAT + * @NFT_NAT_DNAT: destination NAT + */ +enum nft_nat_types { + NFT_NAT_SNAT, + NFT_NAT_DNAT, +}; + +/** + * enum nft_nat_attributes - nf_tables nat expression netlink attributes + * + * @NFTA_NAT_TYPE: NAT type (NLA_U32: nft_nat_types) + * @NFTA_NAT_FAMILY: NAT family (NLA_U32) + * @NFTA_NAT_REG_ADDR_MIN: source register of address range start (NLA_U32: nft_registers) + * @NFTA_NAT_REG_ADDR_MAX: source register of address range end (NLA_U32: nft_registers) + * @NFTA_NAT_REG_PROTO_MIN: source register of proto range start (NLA_U32: nft_registers) + * @NFTA_NAT_REG_PROTO_MAX: source register of proto range end (NLA_U32: nft_registers) + * @NFTA_NAT_FLAGS: NAT flags (see NF_NAT_RANGE_* in linux/netfilter/nf_nat.h) (NLA_U32) + */ +enum nft_nat_attributes { + NFTA_NAT_UNSPEC, + NFTA_NAT_TYPE, + NFTA_NAT_FAMILY, + NFTA_NAT_REG_ADDR_MIN, + NFTA_NAT_REG_ADDR_MAX, + NFTA_NAT_REG_PROTO_MIN, + NFTA_NAT_REG_PROTO_MAX, + NFTA_NAT_FLAGS, + __NFTA_NAT_MAX +}; +#define NFTA_NAT_MAX (__NFTA_NAT_MAX - 1) + +/** + * enum nft_tproxy_attributes - nf_tables tproxy expression netlink attributes + * + * NFTA_TPROXY_FAMILY: Target address family (NLA_U32: nft_registers) + * NFTA_TPROXY_REG_ADDR: Target address register (NLA_U32: nft_registers) + * NFTA_TPROXY_REG_PORT: Target port register (NLA_U32: nft_registers) + */ +enum nft_tproxy_attributes { + NFTA_TPROXY_UNSPEC, + NFTA_TPROXY_FAMILY, + NFTA_TPROXY_REG_ADDR, + NFTA_TPROXY_REG_PORT, + __NFTA_TPROXY_MAX +}; +#define NFTA_TPROXY_MAX (__NFTA_TPROXY_MAX - 1) + +/** + * enum nft_masq_attributes - nf_tables masquerade expression attributes + * + * @NFTA_MASQ_FLAGS: NAT flags (see NF_NAT_RANGE_* in linux/netfilter/nf_nat.h) (NLA_U32) + * @NFTA_MASQ_REG_PROTO_MIN: source register of proto range start (NLA_U32: nft_registers) + * @NFTA_MASQ_REG_PROTO_MAX: source register of proto range end (NLA_U32: nft_registers) + */ +enum nft_masq_attributes { + NFTA_MASQ_UNSPEC, + NFTA_MASQ_FLAGS, + NFTA_MASQ_REG_PROTO_MIN, + NFTA_MASQ_REG_PROTO_MAX, + __NFTA_MASQ_MAX +}; +#define NFTA_MASQ_MAX (__NFTA_MASQ_MAX - 1) + +/** + * enum nft_redir_attributes - nf_tables redirect expression netlink attributes + * + * @NFTA_REDIR_REG_PROTO_MIN: source register of proto range start (NLA_U32: nft_registers) + * @NFTA_REDIR_REG_PROTO_MAX: source register of proto range end (NLA_U32: nft_registers) + * @NFTA_REDIR_FLAGS: NAT flags (see NF_NAT_RANGE_* in linux/netfilter/nf_nat.h) (NLA_U32) + */ +enum nft_redir_attributes { + NFTA_REDIR_UNSPEC, + NFTA_REDIR_REG_PROTO_MIN, + NFTA_REDIR_REG_PROTO_MAX, + NFTA_REDIR_FLAGS, + __NFTA_REDIR_MAX +}; +#define NFTA_REDIR_MAX (__NFTA_REDIR_MAX - 1) + +/** + * enum nft_dup_attributes - nf_tables dup expression netlink attributes + * + * @NFTA_DUP_SREG_ADDR: source register of address (NLA_U32: nft_registers) + * @NFTA_DUP_SREG_DEV: source register of output interface (NLA_U32: nft_register) + */ +enum nft_dup_attributes { + NFTA_DUP_UNSPEC, + NFTA_DUP_SREG_ADDR, + NFTA_DUP_SREG_DEV, + __NFTA_DUP_MAX +}; +#define NFTA_DUP_MAX (__NFTA_DUP_MAX - 1) + +/** + * enum nft_fwd_attributes - nf_tables fwd expression netlink attributes + * + * @NFTA_FWD_SREG_DEV: source register of output interface (NLA_U32: nft_register) + * @NFTA_FWD_SREG_ADDR: source register of destination address (NLA_U32: nft_register) + * @NFTA_FWD_NFPROTO: layer 3 family of source register address (NLA_U32: enum nfproto) + */ +enum nft_fwd_attributes { + NFTA_FWD_UNSPEC, + NFTA_FWD_SREG_DEV, + NFTA_FWD_SREG_ADDR, + NFTA_FWD_NFPROTO, + __NFTA_FWD_MAX +}; +#define NFTA_FWD_MAX (__NFTA_FWD_MAX - 1) + +/** + * enum nft_objref_attributes - nf_tables stateful object expression netlink attributes + * + * @NFTA_OBJREF_IMM_TYPE: object type for immediate reference (NLA_U32: nft_register) + * @NFTA_OBJREF_IMM_NAME: object name for immediate reference (NLA_STRING) + * @NFTA_OBJREF_SET_SREG: source register of the data to look for (NLA_U32: nft_registers) + * @NFTA_OBJREF_SET_NAME: name of the set where to look for (NLA_STRING) + * @NFTA_OBJREF_SET_ID: id of the set where to look for in this transaction (NLA_U32) + */ +enum nft_objref_attributes { + NFTA_OBJREF_UNSPEC, + NFTA_OBJREF_IMM_TYPE, + NFTA_OBJREF_IMM_NAME, + NFTA_OBJREF_SET_SREG, + NFTA_OBJREF_SET_NAME, + NFTA_OBJREF_SET_ID, + __NFTA_OBJREF_MAX +}; +#define NFTA_OBJREF_MAX (__NFTA_OBJREF_MAX - 1) + +/** + * enum nft_gen_attributes - nf_tables ruleset generation attributes + * + * @NFTA_GEN_ID: Ruleset generation ID (NLA_U32) + */ +enum nft_gen_attributes { + NFTA_GEN_UNSPEC, + NFTA_GEN_ID, + NFTA_GEN_PROC_PID, + NFTA_GEN_PROC_NAME, + __NFTA_GEN_MAX +}; +#define NFTA_GEN_MAX (__NFTA_GEN_MAX - 1) + +/* + * enum nft_fib_attributes - nf_tables fib expression netlink attributes + * + * @NFTA_FIB_DREG: destination register (NLA_U32) + * @NFTA_FIB_RESULT: desired result (NLA_U32) + * @NFTA_FIB_FLAGS: flowi fields to initialize when querying the FIB (NLA_U32) + * + * The FIB expression performs a route lookup according + * to the packet data. + */ +enum nft_fib_attributes { + NFTA_FIB_UNSPEC, + NFTA_FIB_DREG, + NFTA_FIB_RESULT, + NFTA_FIB_FLAGS, + __NFTA_FIB_MAX +}; +#define NFTA_FIB_MAX (__NFTA_FIB_MAX - 1) + +enum nft_fib_result { + NFT_FIB_RESULT_UNSPEC, + NFT_FIB_RESULT_OIF, + NFT_FIB_RESULT_OIFNAME, + NFT_FIB_RESULT_ADDRTYPE, + __NFT_FIB_RESULT_MAX +}; +#define NFT_FIB_RESULT_MAX (__NFT_FIB_RESULT_MAX - 1) + +enum nft_fib_flags { + NFTA_FIB_F_SADDR = 1 << 0, /* look up src */ + NFTA_FIB_F_DADDR = 1 << 1, /* look up dst */ + NFTA_FIB_F_MARK = 1 << 2, /* use skb->mark */ + NFTA_FIB_F_IIF = 1 << 3, /* restrict to iif */ + NFTA_FIB_F_OIF = 1 << 4, /* restrict to oif */ + NFTA_FIB_F_PRESENT = 1 << 5, /* check existence only */ +}; + +enum nft_ct_helper_attributes { + NFTA_CT_HELPER_UNSPEC, + NFTA_CT_HELPER_NAME, + NFTA_CT_HELPER_L3PROTO, + NFTA_CT_HELPER_L4PROTO, + __NFTA_CT_HELPER_MAX, +}; +#define NFTA_CT_HELPER_MAX (__NFTA_CT_HELPER_MAX - 1) + +enum nft_ct_timeout_timeout_attributes { + NFTA_CT_TIMEOUT_UNSPEC, + NFTA_CT_TIMEOUT_L3PROTO, + NFTA_CT_TIMEOUT_L4PROTO, + NFTA_CT_TIMEOUT_DATA, + __NFTA_CT_TIMEOUT_MAX, +}; +#define NFTA_CT_TIMEOUT_MAX (__NFTA_CT_TIMEOUT_MAX - 1) + +enum nft_ct_expectation_attributes { + NFTA_CT_EXPECT_UNSPEC, + NFTA_CT_EXPECT_L3PROTO, + NFTA_CT_EXPECT_L4PROTO, + NFTA_CT_EXPECT_DPORT, + NFTA_CT_EXPECT_TIMEOUT, + NFTA_CT_EXPECT_SIZE, + __NFTA_CT_EXPECT_MAX, +}; +#define NFTA_CT_EXPECT_MAX (__NFTA_CT_EXPECT_MAX - 1) + +#define NFT_OBJECT_UNSPEC 0 +#define NFT_OBJECT_COUNTER 1 +#define NFT_OBJECT_QUOTA 2 +#define NFT_OBJECT_CT_HELPER 3 +#define NFT_OBJECT_LIMIT 4 +#define NFT_OBJECT_CONNLIMIT 5 +#define NFT_OBJECT_TUNNEL 6 +#define NFT_OBJECT_CT_TIMEOUT 7 +#define NFT_OBJECT_SECMARK 8 +#define NFT_OBJECT_CT_EXPECT 9 +#define NFT_OBJECT_SYNPROXY 10 +#define __NFT_OBJECT_MAX 11 +#define NFT_OBJECT_MAX (__NFT_OBJECT_MAX - 1) + +/** + * enum nft_object_attributes - nf_tables stateful object netlink attributes + * + * @NFTA_OBJ_TABLE: name of the table containing the expression (NLA_STRING) + * @NFTA_OBJ_NAME: name of this expression type (NLA_STRING) + * @NFTA_OBJ_TYPE: stateful object type (NLA_U32) + * @NFTA_OBJ_DATA: stateful object data (NLA_NESTED) + * @NFTA_OBJ_USE: number of references to this expression (NLA_U32) + * @NFTA_OBJ_HANDLE: object handle (NLA_U64) + * @NFTA_OBJ_USERDATA: user data (NLA_BINARY) + */ +enum nft_object_attributes { + NFTA_OBJ_UNSPEC, + NFTA_OBJ_TABLE, + NFTA_OBJ_NAME, + NFTA_OBJ_TYPE, + NFTA_OBJ_DATA, + NFTA_OBJ_USE, + NFTA_OBJ_HANDLE, + NFTA_OBJ_PAD, + NFTA_OBJ_USERDATA, + __NFTA_OBJ_MAX +}; +#define NFTA_OBJ_MAX (__NFTA_OBJ_MAX - 1) + +/** + * enum nft_flowtable_flags - nf_tables flowtable flags + * + * @NFT_FLOWTABLE_HW_OFFLOAD: flowtable hardware offload is enabled + * @NFT_FLOWTABLE_COUNTER: enable flow counters + */ +enum nft_flowtable_flags { + NFT_FLOWTABLE_HW_OFFLOAD = 0x1, + NFT_FLOWTABLE_COUNTER = 0x2, + NFT_FLOWTABLE_MASK = (NFT_FLOWTABLE_HW_OFFLOAD | + NFT_FLOWTABLE_COUNTER) +}; + +/** + * enum nft_flowtable_attributes - nf_tables flow table netlink attributes + * + * @NFTA_FLOWTABLE_TABLE: name of the table containing the expression (NLA_STRING) + * @NFTA_FLOWTABLE_NAME: name of this flow table (NLA_STRING) + * @NFTA_FLOWTABLE_HOOK: netfilter hook configuration(NLA_U32) + * @NFTA_FLOWTABLE_USE: number of references to this flow table (NLA_U32) + * @NFTA_FLOWTABLE_HANDLE: object handle (NLA_U64) + * @NFTA_FLOWTABLE_FLAGS: flags (NLA_U32) + */ +enum nft_flowtable_attributes { + NFTA_FLOWTABLE_UNSPEC, + NFTA_FLOWTABLE_TABLE, + NFTA_FLOWTABLE_NAME, + NFTA_FLOWTABLE_HOOK, + NFTA_FLOWTABLE_USE, + NFTA_FLOWTABLE_HANDLE, + NFTA_FLOWTABLE_PAD, + NFTA_FLOWTABLE_FLAGS, + __NFTA_FLOWTABLE_MAX +}; +#define NFTA_FLOWTABLE_MAX (__NFTA_FLOWTABLE_MAX - 1) + +/** + * enum nft_flowtable_hook_attributes - nf_tables flow table hook netlink attributes + * + * @NFTA_FLOWTABLE_HOOK_NUM: netfilter hook number (NLA_U32) + * @NFTA_FLOWTABLE_HOOK_PRIORITY: netfilter hook priority (NLA_U32) + * @NFTA_FLOWTABLE_HOOK_DEVS: input devices this flow table is bound to (NLA_NESTED) + */ +enum nft_flowtable_hook_attributes { + NFTA_FLOWTABLE_HOOK_UNSPEC, + NFTA_FLOWTABLE_HOOK_NUM, + NFTA_FLOWTABLE_HOOK_PRIORITY, + NFTA_FLOWTABLE_HOOK_DEVS, + __NFTA_FLOWTABLE_HOOK_MAX +}; +#define NFTA_FLOWTABLE_HOOK_MAX (__NFTA_FLOWTABLE_HOOK_MAX - 1) + +/** + * enum nft_osf_attributes - nftables osf expression netlink attributes + * + * @NFTA_OSF_DREG: destination register (NLA_U32: nft_registers) + * @NFTA_OSF_TTL: Value of the TTL osf option (NLA_U8) + * @NFTA_OSF_FLAGS: flags (NLA_U32) + */ +enum nft_osf_attributes { + NFTA_OSF_UNSPEC, + NFTA_OSF_DREG, + NFTA_OSF_TTL, + NFTA_OSF_FLAGS, + __NFTA_OSF_MAX, +}; +#define NFTA_OSF_MAX (__NFTA_OSF_MAX - 1) + +enum nft_osf_flags { + NFT_OSF_F_VERSION = (1 << 0), +}; + +/** + * enum nft_synproxy_attributes - nf_tables synproxy expression netlink attributes + * + * @NFTA_SYNPROXY_MSS: mss value sent to the backend (NLA_U16) + * @NFTA_SYNPROXY_WSCALE: wscale value sent to the backend (NLA_U8) + * @NFTA_SYNPROXY_FLAGS: flags (NLA_U32) + */ +enum nft_synproxy_attributes { + NFTA_SYNPROXY_UNSPEC, + NFTA_SYNPROXY_MSS, + NFTA_SYNPROXY_WSCALE, + NFTA_SYNPROXY_FLAGS, + __NFTA_SYNPROXY_MAX, +}; +#define NFTA_SYNPROXY_MAX (__NFTA_SYNPROXY_MAX - 1) + +/** + * enum nft_device_attributes - nf_tables device netlink attributes + * + * @NFTA_DEVICE_NAME: name of this device (NLA_STRING) + */ +enum nft_devices_attributes { + NFTA_DEVICE_UNSPEC, + NFTA_DEVICE_NAME, + __NFTA_DEVICE_MAX +}; +#define NFTA_DEVICE_MAX (__NFTA_DEVICE_MAX - 1) + +/* + * enum nft_xfrm_attributes - nf_tables xfrm expr netlink attributes + * + * @NFTA_XFRM_DREG: destination register (NLA_U32) + * @NFTA_XFRM_KEY: enum nft_xfrm_keys (NLA_U32) + * @NFTA_XFRM_DIR: direction (NLA_U8) + * @NFTA_XFRM_SPNUM: index in secpath array (NLA_U32) + */ +enum nft_xfrm_attributes { + NFTA_XFRM_UNSPEC, + NFTA_XFRM_DREG, + NFTA_XFRM_KEY, + NFTA_XFRM_DIR, + NFTA_XFRM_SPNUM, + __NFTA_XFRM_MAX +}; +#define NFTA_XFRM_MAX (__NFTA_XFRM_MAX - 1) + +enum nft_xfrm_keys { + NFT_XFRM_KEY_UNSPEC, + NFT_XFRM_KEY_DADDR_IP4, + NFT_XFRM_KEY_DADDR_IP6, + NFT_XFRM_KEY_SADDR_IP4, + NFT_XFRM_KEY_SADDR_IP6, + NFT_XFRM_KEY_REQID, + NFT_XFRM_KEY_SPI, + __NFT_XFRM_KEY_MAX, +}; +#define NFT_XFRM_KEY_MAX (__NFT_XFRM_KEY_MAX - 1) + +/** + * enum nft_trace_attributes - nf_tables trace netlink attributes + * + * @NFTA_TRACE_TABLE: name of the table (NLA_STRING) + * @NFTA_TRACE_CHAIN: name of the chain (NLA_STRING) + * @NFTA_TRACE_RULE_HANDLE: numeric handle of the rule (NLA_U64) + * @NFTA_TRACE_TYPE: type of the event (NLA_U32: nft_trace_types) + * @NFTA_TRACE_VERDICT: verdict returned by hook (NLA_NESTED: nft_verdicts) + * @NFTA_TRACE_ID: pseudo-id, same for each skb traced (NLA_U32) + * @NFTA_TRACE_LL_HEADER: linklayer header (NLA_BINARY) + * @NFTA_TRACE_NETWORK_HEADER: network header (NLA_BINARY) + * @NFTA_TRACE_TRANSPORT_HEADER: transport header (NLA_BINARY) + * @NFTA_TRACE_IIF: indev ifindex (NLA_U32) + * @NFTA_TRACE_IIFTYPE: netdev->type of indev (NLA_U16) + * @NFTA_TRACE_OIF: outdev ifindex (NLA_U32) + * @NFTA_TRACE_OIFTYPE: netdev->type of outdev (NLA_U16) + * @NFTA_TRACE_MARK: nfmark (NLA_U32) + * @NFTA_TRACE_NFPROTO: nf protocol processed (NLA_U32) + * @NFTA_TRACE_POLICY: policy that decided fate of packet (NLA_U32) + */ +enum nft_trace_attributes { + NFTA_TRACE_UNSPEC, + NFTA_TRACE_TABLE, + NFTA_TRACE_CHAIN, + NFTA_TRACE_RULE_HANDLE, + NFTA_TRACE_TYPE, + NFTA_TRACE_VERDICT, + NFTA_TRACE_ID, + NFTA_TRACE_LL_HEADER, + NFTA_TRACE_NETWORK_HEADER, + NFTA_TRACE_TRANSPORT_HEADER, + NFTA_TRACE_IIF, + NFTA_TRACE_IIFTYPE, + NFTA_TRACE_OIF, + NFTA_TRACE_OIFTYPE, + NFTA_TRACE_MARK, + NFTA_TRACE_NFPROTO, + NFTA_TRACE_POLICY, + NFTA_TRACE_PAD, + __NFTA_TRACE_MAX +}; +#define NFTA_TRACE_MAX (__NFTA_TRACE_MAX - 1) + +enum nft_trace_types { + NFT_TRACETYPE_UNSPEC, + NFT_TRACETYPE_POLICY, + NFT_TRACETYPE_RETURN, + NFT_TRACETYPE_RULE, + __NFT_TRACETYPE_MAX +}; +#define NFT_TRACETYPE_MAX (__NFT_TRACETYPE_MAX - 1) + +/** + * enum nft_ng_attributes - nf_tables number generator expression netlink attributes + * + * @NFTA_NG_DREG: destination register (NLA_U32) + * @NFTA_NG_MODULUS: maximum counter value (NLA_U32) + * @NFTA_NG_TYPE: operation type (NLA_U32) + * @NFTA_NG_OFFSET: offset to be added to the counter (NLA_U32) + * @NFTA_NG_SET_NAME: name of the map to lookup (NLA_STRING) + * @NFTA_NG_SET_ID: id of the map (NLA_U32) + */ +enum nft_ng_attributes { + NFTA_NG_UNSPEC, + NFTA_NG_DREG, + NFTA_NG_MODULUS, + NFTA_NG_TYPE, + NFTA_NG_OFFSET, + NFTA_NG_SET_NAME, /* deprecated */ + NFTA_NG_SET_ID, /* deprecated */ + __NFTA_NG_MAX +}; +#define NFTA_NG_MAX (__NFTA_NG_MAX - 1) + +enum nft_ng_types { + NFT_NG_INCREMENTAL, + NFT_NG_RANDOM, + __NFT_NG_MAX +}; +#define NFT_NG_MAX (__NFT_NG_MAX - 1) + +enum nft_tunnel_key_ip_attributes { + NFTA_TUNNEL_KEY_IP_UNSPEC, + NFTA_TUNNEL_KEY_IP_SRC, + NFTA_TUNNEL_KEY_IP_DST, + __NFTA_TUNNEL_KEY_IP_MAX +}; +#define NFTA_TUNNEL_KEY_IP_MAX (__NFTA_TUNNEL_KEY_IP_MAX - 1) + +enum nft_tunnel_ip6_attributes { + NFTA_TUNNEL_KEY_IP6_UNSPEC, + NFTA_TUNNEL_KEY_IP6_SRC, + NFTA_TUNNEL_KEY_IP6_DST, + NFTA_TUNNEL_KEY_IP6_FLOWLABEL, + __NFTA_TUNNEL_KEY_IP6_MAX +}; +#define NFTA_TUNNEL_KEY_IP6_MAX (__NFTA_TUNNEL_KEY_IP6_MAX - 1) + +enum nft_tunnel_opts_attributes { + NFTA_TUNNEL_KEY_OPTS_UNSPEC, + NFTA_TUNNEL_KEY_OPTS_VXLAN, + NFTA_TUNNEL_KEY_OPTS_ERSPAN, + NFTA_TUNNEL_KEY_OPTS_GENEVE, + __NFTA_TUNNEL_KEY_OPTS_MAX +}; +#define NFTA_TUNNEL_KEY_OPTS_MAX (__NFTA_TUNNEL_KEY_OPTS_MAX - 1) + +enum nft_tunnel_opts_vxlan_attributes { + NFTA_TUNNEL_KEY_VXLAN_UNSPEC, + NFTA_TUNNEL_KEY_VXLAN_GBP, + __NFTA_TUNNEL_KEY_VXLAN_MAX +}; +#define NFTA_TUNNEL_KEY_VXLAN_MAX (__NFTA_TUNNEL_KEY_VXLAN_MAX - 1) + +enum nft_tunnel_opts_erspan_attributes { + NFTA_TUNNEL_KEY_ERSPAN_UNSPEC, + NFTA_TUNNEL_KEY_ERSPAN_VERSION, + NFTA_TUNNEL_KEY_ERSPAN_V1_INDEX, + NFTA_TUNNEL_KEY_ERSPAN_V2_HWID, + NFTA_TUNNEL_KEY_ERSPAN_V2_DIR, + __NFTA_TUNNEL_KEY_ERSPAN_MAX +}; +#define NFTA_TUNNEL_KEY_ERSPAN_MAX (__NFTA_TUNNEL_KEY_ERSPAN_MAX - 1) + +enum nft_tunnel_opts_geneve_attributes { + NFTA_TUNNEL_KEY_GENEVE_UNSPEC, + NFTA_TUNNEL_KEY_GENEVE_CLASS, + NFTA_TUNNEL_KEY_GENEVE_TYPE, + NFTA_TUNNEL_KEY_GENEVE_DATA, + __NFTA_TUNNEL_KEY_GENEVE_MAX +}; +#define NFTA_TUNNEL_KEY_GENEVE_MAX (__NFTA_TUNNEL_KEY_GENEVE_MAX - 1) + +enum nft_tunnel_flags { + NFT_TUNNEL_F_ZERO_CSUM_TX = (1 << 0), + NFT_TUNNEL_F_DONT_FRAGMENT = (1 << 1), + NFT_TUNNEL_F_SEQ_NUMBER = (1 << 2), +}; +#define NFT_TUNNEL_F_MASK (NFT_TUNNEL_F_ZERO_CSUM_TX | \ + NFT_TUNNEL_F_DONT_FRAGMENT | \ + NFT_TUNNEL_F_SEQ_NUMBER) + +enum nft_tunnel_key_attributes { + NFTA_TUNNEL_KEY_UNSPEC, + NFTA_TUNNEL_KEY_ID, + NFTA_TUNNEL_KEY_IP, + NFTA_TUNNEL_KEY_IP6, + NFTA_TUNNEL_KEY_FLAGS, + NFTA_TUNNEL_KEY_TOS, + NFTA_TUNNEL_KEY_TTL, + NFTA_TUNNEL_KEY_SPORT, + NFTA_TUNNEL_KEY_DPORT, + NFTA_TUNNEL_KEY_OPTS, + __NFTA_TUNNEL_KEY_MAX +}; +#define NFTA_TUNNEL_KEY_MAX (__NFTA_TUNNEL_KEY_MAX - 1) + +enum nft_tunnel_keys { + NFT_TUNNEL_PATH, + NFT_TUNNEL_ID, + __NFT_TUNNEL_MAX +}; +#define NFT_TUNNEL_MAX (__NFT_TUNNEL_MAX - 1) + +enum nft_tunnel_mode { + NFT_TUNNEL_MODE_NONE, + NFT_TUNNEL_MODE_RX, + NFT_TUNNEL_MODE_TX, + __NFT_TUNNEL_MODE_MAX +}; +#define NFT_TUNNEL_MODE_MAX (__NFT_TUNNEL_MODE_MAX - 1) + +enum nft_tunnel_attributes { + NFTA_TUNNEL_UNSPEC, + NFTA_TUNNEL_KEY, + NFTA_TUNNEL_DREG, + NFTA_TUNNEL_MODE, + __NFTA_TUNNEL_MAX +}; +#define NFTA_TUNNEL_MAX (__NFTA_TUNNEL_MAX - 1) + +#endif /* _LINUX_NF_TABLES_H */ diff --git a/src/basic/linux/netfilter/nfnetlink.h b/src/basic/linux/netfilter/nfnetlink.h new file mode 100644 index 0000000..6cd58cd --- /dev/null +++ b/src/basic/linux/netfilter/nfnetlink.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_NFNETLINK_H +#define _UAPI_NFNETLINK_H +#include <linux/types.h> +#include <linux/netfilter/nfnetlink_compat.h> + +enum nfnetlink_groups { + NFNLGRP_NONE, +#define NFNLGRP_NONE NFNLGRP_NONE + NFNLGRP_CONNTRACK_NEW, +#define NFNLGRP_CONNTRACK_NEW NFNLGRP_CONNTRACK_NEW + NFNLGRP_CONNTRACK_UPDATE, +#define NFNLGRP_CONNTRACK_UPDATE NFNLGRP_CONNTRACK_UPDATE + NFNLGRP_CONNTRACK_DESTROY, +#define NFNLGRP_CONNTRACK_DESTROY NFNLGRP_CONNTRACK_DESTROY + NFNLGRP_CONNTRACK_EXP_NEW, +#define NFNLGRP_CONNTRACK_EXP_NEW NFNLGRP_CONNTRACK_EXP_NEW + NFNLGRP_CONNTRACK_EXP_UPDATE, +#define NFNLGRP_CONNTRACK_EXP_UPDATE NFNLGRP_CONNTRACK_EXP_UPDATE + NFNLGRP_CONNTRACK_EXP_DESTROY, +#define NFNLGRP_CONNTRACK_EXP_DESTROY NFNLGRP_CONNTRACK_EXP_DESTROY + NFNLGRP_NFTABLES, +#define NFNLGRP_NFTABLES NFNLGRP_NFTABLES + NFNLGRP_ACCT_QUOTA, +#define NFNLGRP_ACCT_QUOTA NFNLGRP_ACCT_QUOTA + NFNLGRP_NFTRACE, +#define NFNLGRP_NFTRACE NFNLGRP_NFTRACE + __NFNLGRP_MAX, +}; +#define NFNLGRP_MAX (__NFNLGRP_MAX - 1) + +/* General form of address family dependent message. + */ +struct nfgenmsg { + __u8 nfgen_family; /* AF_xxx */ + __u8 version; /* nfnetlink version */ + __be16 res_id; /* resource id */ +}; + +#define NFNETLINK_V0 0 + +/* netfilter netlink message types are split in two pieces: + * 8 bit subsystem, 8bit operation. + */ + +#define NFNL_SUBSYS_ID(x) ((x & 0xff00) >> 8) +#define NFNL_MSG_TYPE(x) (x & 0x00ff) + +/* No enum here, otherwise __stringify() trick of MODULE_ALIAS_NFNL_SUBSYS() + * won't work anymore */ +#define NFNL_SUBSYS_NONE 0 +#define NFNL_SUBSYS_CTNETLINK 1 +#define NFNL_SUBSYS_CTNETLINK_EXP 2 +#define NFNL_SUBSYS_QUEUE 3 +#define NFNL_SUBSYS_ULOG 4 +#define NFNL_SUBSYS_OSF 5 +#define NFNL_SUBSYS_IPSET 6 +#define NFNL_SUBSYS_ACCT 7 +#define NFNL_SUBSYS_CTNETLINK_TIMEOUT 8 +#define NFNL_SUBSYS_CTHELPER 9 +#define NFNL_SUBSYS_NFTABLES 10 +#define NFNL_SUBSYS_NFT_COMPAT 11 +#define NFNL_SUBSYS_HOOK 12 +#define NFNL_SUBSYS_COUNT 13 + +/* Reserved control nfnetlink messages */ +#define NFNL_MSG_BATCH_BEGIN NLMSG_MIN_TYPE +#define NFNL_MSG_BATCH_END NLMSG_MIN_TYPE+1 + +/** + * enum nfnl_batch_attributes - nfnetlink batch netlink attributes + * + * @NFNL_BATCH_GENID: generation ID for this changeset (NLA_U32) + */ +enum nfnl_batch_attributes { + NFNL_BATCH_UNSPEC, + NFNL_BATCH_GENID, + __NFNL_BATCH_MAX +}; +#define NFNL_BATCH_MAX (__NFNL_BATCH_MAX - 1) + +#endif /* _UAPI_NFNETLINK_H */ diff --git a/src/basic/linux/netlink.h b/src/basic/linux/netlink.h new file mode 100644 index 0000000..e2ae82e --- /dev/null +++ b/src/basic/linux/netlink.h @@ -0,0 +1,378 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_NETLINK_H +#define _UAPI__LINUX_NETLINK_H + +#include <linux/const.h> +#include <linux/socket.h> /* for __kernel_sa_family_t */ +#include <linux/types.h> + +#define NETLINK_ROUTE 0 /* Routing/device hook */ +#define NETLINK_UNUSED 1 /* Unused number */ +#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */ +#define NETLINK_FIREWALL 3 /* Unused number, formerly ip_queue */ +#define NETLINK_SOCK_DIAG 4 /* socket monitoring */ +#define NETLINK_NFLOG 5 /* netfilter/iptables ULOG */ +#define NETLINK_XFRM 6 /* ipsec */ +#define NETLINK_SELINUX 7 /* SELinux event notifications */ +#define NETLINK_ISCSI 8 /* Open-iSCSI */ +#define NETLINK_AUDIT 9 /* auditing */ +#define NETLINK_FIB_LOOKUP 10 +#define NETLINK_CONNECTOR 11 +#define NETLINK_NETFILTER 12 /* netfilter subsystem */ +#define NETLINK_IP6_FW 13 +#define NETLINK_DNRTMSG 14 /* DECnet routing messages (obsolete) */ +#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ +#define NETLINK_GENERIC 16 +/* leave room for NETLINK_DM (DM Events) */ +#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */ +#define NETLINK_ECRYPTFS 19 +#define NETLINK_RDMA 20 +#define NETLINK_CRYPTO 21 /* Crypto layer */ +#define NETLINK_SMC 22 /* SMC monitoring */ + +#define NETLINK_INET_DIAG NETLINK_SOCK_DIAG + +#define MAX_LINKS 32 + +struct sockaddr_nl { + __kernel_sa_family_t nl_family; /* AF_NETLINK */ + unsigned short nl_pad; /* zero */ + __u32 nl_pid; /* port ID */ + __u32 nl_groups; /* multicast groups mask */ +}; + +/** + * struct nlmsghdr - fixed format metadata header of Netlink messages + * @nlmsg_len: Length of message including header + * @nlmsg_type: Message content type + * @nlmsg_flags: Additional flags + * @nlmsg_seq: Sequence number + * @nlmsg_pid: Sending process port ID + */ +struct nlmsghdr { + __u32 nlmsg_len; + __u16 nlmsg_type; + __u16 nlmsg_flags; + __u32 nlmsg_seq; + __u32 nlmsg_pid; +}; + +/* Flags values */ + +#define NLM_F_REQUEST 0x01 /* It is request message. */ +#define NLM_F_MULTI 0x02 /* Multipart message, terminated by NLMSG_DONE */ +#define NLM_F_ACK 0x04 /* Reply with ack, with zero or error code */ +#define NLM_F_ECHO 0x08 /* Receive resulting notifications */ +#define NLM_F_DUMP_INTR 0x10 /* Dump was inconsistent due to sequence change */ +#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */ + +/* Modifiers to GET request */ +#define NLM_F_ROOT 0x100 /* specify tree root */ +#define NLM_F_MATCH 0x200 /* return all matching */ +#define NLM_F_ATOMIC 0x400 /* atomic GET */ +#define NLM_F_DUMP (NLM_F_ROOT|NLM_F_MATCH) + +/* Modifiers to NEW request */ +#define NLM_F_REPLACE 0x100 /* Override existing */ +#define NLM_F_EXCL 0x200 /* Do not touch, if it exists */ +#define NLM_F_CREATE 0x400 /* Create, if it does not exist */ +#define NLM_F_APPEND 0x800 /* Add to end of list */ + +/* Modifiers to DELETE request */ +#define NLM_F_NONREC 0x100 /* Do not delete recursively */ +#define NLM_F_BULK 0x200 /* Delete multiple objects */ + +/* Flags for ACK message */ +#define NLM_F_CAPPED 0x100 /* request was capped */ +#define NLM_F_ACK_TLVS 0x200 /* extended ACK TVLs were included */ + +/* + 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL + 4.4BSD CHANGE NLM_F_REPLACE + + True CHANGE NLM_F_CREATE|NLM_F_REPLACE + Append NLM_F_CREATE + Check NLM_F_EXCL + */ + +#define NLMSG_ALIGNTO 4U +#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) ) +#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr))) +#define NLMSG_LENGTH(len) ((len) + NLMSG_HDRLEN) +#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len)) +#define NLMSG_DATA(nlh) ((void *)(((char *)nlh) + NLMSG_HDRLEN)) +#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \ + (struct nlmsghdr *)(((char *)(nlh)) + \ + NLMSG_ALIGN((nlh)->nlmsg_len))) +#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \ + (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \ + (nlh)->nlmsg_len <= (len)) +#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len))) + +#define NLMSG_NOOP 0x1 /* Nothing. */ +#define NLMSG_ERROR 0x2 /* Error */ +#define NLMSG_DONE 0x3 /* End of a dump */ +#define NLMSG_OVERRUN 0x4 /* Data lost */ + +#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */ + +struct nlmsgerr { + int error; + struct nlmsghdr msg; + /* + * followed by the message contents unless NETLINK_CAP_ACK was set + * or the ACK indicates success (error == 0) + * message length is aligned with NLMSG_ALIGN() + */ + /* + * followed by TLVs defined in enum nlmsgerr_attrs + * if NETLINK_EXT_ACK was set + */ +}; + +/** + * enum nlmsgerr_attrs - nlmsgerr attributes + * @NLMSGERR_ATTR_UNUSED: unused + * @NLMSGERR_ATTR_MSG: error message string (string) + * @NLMSGERR_ATTR_OFFS: offset of the invalid attribute in the original + * message, counting from the beginning of the header (u32) + * @NLMSGERR_ATTR_COOKIE: arbitrary subsystem specific cookie to + * be used - in the success case - to identify a created + * object or operation or similar (binary) + * @NLMSGERR_ATTR_POLICY: policy for a rejected attribute + * @NLMSGERR_ATTR_MISS_TYPE: type of a missing required attribute, + * %NLMSGERR_ATTR_MISS_NEST will not be present if the attribute was + * missing at the message level + * @NLMSGERR_ATTR_MISS_NEST: offset of the nest where attribute was missing + * @__NLMSGERR_ATTR_MAX: number of attributes + * @NLMSGERR_ATTR_MAX: highest attribute number + */ +enum nlmsgerr_attrs { + NLMSGERR_ATTR_UNUSED, + NLMSGERR_ATTR_MSG, + NLMSGERR_ATTR_OFFS, + NLMSGERR_ATTR_COOKIE, + NLMSGERR_ATTR_POLICY, + NLMSGERR_ATTR_MISS_TYPE, + NLMSGERR_ATTR_MISS_NEST, + + __NLMSGERR_ATTR_MAX, + NLMSGERR_ATTR_MAX = __NLMSGERR_ATTR_MAX - 1 +}; + +#define NETLINK_ADD_MEMBERSHIP 1 +#define NETLINK_DROP_MEMBERSHIP 2 +#define NETLINK_PKTINFO 3 +#define NETLINK_BROADCAST_ERROR 4 +#define NETLINK_NO_ENOBUFS 5 +#ifndef __KERNEL__ +#define NETLINK_RX_RING 6 +#define NETLINK_TX_RING 7 +#endif +#define NETLINK_LISTEN_ALL_NSID 8 +#define NETLINK_LIST_MEMBERSHIPS 9 +#define NETLINK_CAP_ACK 10 +#define NETLINK_EXT_ACK 11 +#define NETLINK_GET_STRICT_CHK 12 + +struct nl_pktinfo { + __u32 group; +}; + +struct nl_mmap_req { + unsigned int nm_block_size; + unsigned int nm_block_nr; + unsigned int nm_frame_size; + unsigned int nm_frame_nr; +}; + +struct nl_mmap_hdr { + unsigned int nm_status; + unsigned int nm_len; + __u32 nm_group; + /* credentials */ + __u32 nm_pid; + __u32 nm_uid; + __u32 nm_gid; +}; + +#ifndef __KERNEL__ +enum nl_mmap_status { + NL_MMAP_STATUS_UNUSED, + NL_MMAP_STATUS_RESERVED, + NL_MMAP_STATUS_VALID, + NL_MMAP_STATUS_COPY, + NL_MMAP_STATUS_SKIP, +}; + +#define NL_MMAP_MSG_ALIGNMENT NLMSG_ALIGNTO +#define NL_MMAP_MSG_ALIGN(sz) __ALIGN_KERNEL(sz, NL_MMAP_MSG_ALIGNMENT) +#define NL_MMAP_HDRLEN NL_MMAP_MSG_ALIGN(sizeof(struct nl_mmap_hdr)) +#endif + +#define NET_MAJOR 36 /* Major 36 is reserved for networking */ + +enum { + NETLINK_UNCONNECTED = 0, + NETLINK_CONNECTED, +}; + +/* + * <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)--> + * +---------------------+- - -+- - - - - - - - - -+- - -+ + * | Header | Pad | Payload | Pad | + * | (struct nlattr) | ing | | ing | + * +---------------------+- - -+- - - - - - - - - -+- - -+ + * <-------------- nlattr->nla_len --------------> + */ + +struct nlattr { + __u16 nla_len; + __u16 nla_type; +}; + +/* + * nla_type (16 bits) + * +---+---+-------------------------------+ + * | N | O | Attribute Type | + * +---+---+-------------------------------+ + * N := Carries nested attributes + * O := Payload stored in network byte order + * + * Note: The N and O flag are mutually exclusive. + */ +#define NLA_F_NESTED (1 << 15) +#define NLA_F_NET_BYTEORDER (1 << 14) +#define NLA_TYPE_MASK ~(NLA_F_NESTED | NLA_F_NET_BYTEORDER) + +#define NLA_ALIGNTO 4 +#define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1)) +#define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr))) + +/* Generic 32 bitflags attribute content sent to the kernel. + * + * The value is a bitmap that defines the values being set + * The selector is a bitmask that defines which value is legit + * + * Examples: + * value = 0x0, and selector = 0x1 + * implies we are selecting bit 1 and we want to set its value to 0. + * + * value = 0x2, and selector = 0x2 + * implies we are selecting bit 2 and we want to set its value to 1. + * + */ +struct nla_bitfield32 { + __u32 value; + __u32 selector; +}; + +/* + * policy descriptions - it's specific to each family how this is used + * Normally, it should be retrieved via a dump inside another attribute + * specifying where it applies. + */ + +/** + * enum netlink_attribute_type - type of an attribute + * @NL_ATTR_TYPE_INVALID: unused + * @NL_ATTR_TYPE_FLAG: flag attribute (present/not present) + * @NL_ATTR_TYPE_U8: 8-bit unsigned attribute + * @NL_ATTR_TYPE_U16: 16-bit unsigned attribute + * @NL_ATTR_TYPE_U32: 32-bit unsigned attribute + * @NL_ATTR_TYPE_U64: 64-bit unsigned attribute + * @NL_ATTR_TYPE_S8: 8-bit signed attribute + * @NL_ATTR_TYPE_S16: 16-bit signed attribute + * @NL_ATTR_TYPE_S32: 32-bit signed attribute + * @NL_ATTR_TYPE_S64: 64-bit signed attribute + * @NL_ATTR_TYPE_BINARY: binary data, min/max length may be specified + * @NL_ATTR_TYPE_STRING: string, min/max length may be specified + * @NL_ATTR_TYPE_NUL_STRING: NUL-terminated string, + * min/max length may be specified + * @NL_ATTR_TYPE_NESTED: nested, i.e. the content of this attribute + * consists of sub-attributes. The nested policy and maxtype + * inside may be specified. + * @NL_ATTR_TYPE_NESTED_ARRAY: nested array, i.e. the content of this + * attribute contains sub-attributes whose type is irrelevant + * (just used to separate the array entries) and each such array + * entry has attributes again, the policy for those inner ones + * and the corresponding maxtype may be specified. + * @NL_ATTR_TYPE_BITFIELD32: &struct nla_bitfield32 attribute + */ +enum netlink_attribute_type { + NL_ATTR_TYPE_INVALID, + + NL_ATTR_TYPE_FLAG, + + NL_ATTR_TYPE_U8, + NL_ATTR_TYPE_U16, + NL_ATTR_TYPE_U32, + NL_ATTR_TYPE_U64, + + NL_ATTR_TYPE_S8, + NL_ATTR_TYPE_S16, + NL_ATTR_TYPE_S32, + NL_ATTR_TYPE_S64, + + NL_ATTR_TYPE_BINARY, + NL_ATTR_TYPE_STRING, + NL_ATTR_TYPE_NUL_STRING, + + NL_ATTR_TYPE_NESTED, + NL_ATTR_TYPE_NESTED_ARRAY, + + NL_ATTR_TYPE_BITFIELD32, +}; + +/** + * enum netlink_policy_type_attr - policy type attributes + * @NL_POLICY_TYPE_ATTR_UNSPEC: unused + * @NL_POLICY_TYPE_ATTR_TYPE: type of the attribute, + * &enum netlink_attribute_type (U32) + * @NL_POLICY_TYPE_ATTR_MIN_VALUE_S: minimum value for signed + * integers (S64) + * @NL_POLICY_TYPE_ATTR_MAX_VALUE_S: maximum value for signed + * integers (S64) + * @NL_POLICY_TYPE_ATTR_MIN_VALUE_U: minimum value for unsigned + * integers (U64) + * @NL_POLICY_TYPE_ATTR_MAX_VALUE_U: maximum value for unsigned + * integers (U64) + * @NL_POLICY_TYPE_ATTR_MIN_LENGTH: minimum length for binary + * attributes, no minimum if not given (U32) + * @NL_POLICY_TYPE_ATTR_MAX_LENGTH: maximum length for binary + * attributes, no maximum if not given (U32) + * @NL_POLICY_TYPE_ATTR_POLICY_IDX: sub policy for nested and + * nested array types (U32) + * @NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE: maximum sub policy + * attribute for nested and nested array types, this can + * in theory be < the size of the policy pointed to by + * the index, if limited inside the nesting (U32) + * @NL_POLICY_TYPE_ATTR_BITFIELD32_MASK: valid mask for the + * bitfield32 type (U32) + * @NL_POLICY_TYPE_ATTR_MASK: mask of valid bits for unsigned integers (U64) + * @NL_POLICY_TYPE_ATTR_PAD: pad attribute for 64-bit alignment + * + * @__NL_POLICY_TYPE_ATTR_MAX: number of attributes + * @NL_POLICY_TYPE_ATTR_MAX: highest attribute number + */ +enum netlink_policy_type_attr { + NL_POLICY_TYPE_ATTR_UNSPEC, + NL_POLICY_TYPE_ATTR_TYPE, + NL_POLICY_TYPE_ATTR_MIN_VALUE_S, + NL_POLICY_TYPE_ATTR_MAX_VALUE_S, + NL_POLICY_TYPE_ATTR_MIN_VALUE_U, + NL_POLICY_TYPE_ATTR_MAX_VALUE_U, + NL_POLICY_TYPE_ATTR_MIN_LENGTH, + NL_POLICY_TYPE_ATTR_MAX_LENGTH, + NL_POLICY_TYPE_ATTR_POLICY_IDX, + NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE, + NL_POLICY_TYPE_ATTR_BITFIELD32_MASK, + NL_POLICY_TYPE_ATTR_PAD, + NL_POLICY_TYPE_ATTR_MASK, + + /* keep last */ + __NL_POLICY_TYPE_ATTR_MAX, + NL_POLICY_TYPE_ATTR_MAX = __NL_POLICY_TYPE_ATTR_MAX - 1 +}; + +#endif /* _UAPI__LINUX_NETLINK_H */ diff --git a/src/basic/linux/nexthop.h b/src/basic/linux/nexthop.h new file mode 100644 index 0000000..d8ffa8c --- /dev/null +++ b/src/basic/linux/nexthop.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_NEXTHOP_H +#define _UAPI_LINUX_NEXTHOP_H + +#include <linux/types.h> + +struct nhmsg { + unsigned char nh_family; + unsigned char nh_scope; /* return only */ + unsigned char nh_protocol; /* Routing protocol that installed nh */ + unsigned char resvd; + unsigned int nh_flags; /* RTNH_F flags */ +}; + +/* entry in a nexthop group */ +struct nexthop_grp { + __u32 id; /* nexthop id - must exist */ + __u8 weight; /* weight of this nexthop */ + __u8 resvd1; + __u16 resvd2; +}; + +enum { + NEXTHOP_GRP_TYPE_MPATH, /* hash-threshold nexthop group + * default type if not specified + */ + NEXTHOP_GRP_TYPE_RES, /* resilient nexthop group */ + __NEXTHOP_GRP_TYPE_MAX, +}; + +#define NEXTHOP_GRP_TYPE_MAX (__NEXTHOP_GRP_TYPE_MAX - 1) + +enum { + NHA_UNSPEC, + NHA_ID, /* u32; id for nexthop. id == 0 means auto-assign */ + + NHA_GROUP, /* array of nexthop_grp */ + NHA_GROUP_TYPE, /* u16 one of NEXTHOP_GRP_TYPE */ + /* if NHA_GROUP attribute is added, no other attributes can be set */ + + NHA_BLACKHOLE, /* flag; nexthop used to blackhole packets */ + /* if NHA_BLACKHOLE is added, OIF, GATEWAY, ENCAP can not be set */ + + NHA_OIF, /* u32; nexthop device */ + NHA_GATEWAY, /* be32 (IPv4) or in6_addr (IPv6) gw address */ + NHA_ENCAP_TYPE, /* u16; lwt encap type */ + NHA_ENCAP, /* lwt encap data */ + + /* NHA_OIF can be appended to dump request to return only + * nexthops using given device + */ + NHA_GROUPS, /* flag; only return nexthop groups in dump */ + NHA_MASTER, /* u32; only return nexthops with given master dev */ + + NHA_FDB, /* flag; nexthop belongs to a bridge fdb */ + /* if NHA_FDB is added, OIF, BLACKHOLE, ENCAP cannot be set */ + + /* nested; resilient nexthop group attributes */ + NHA_RES_GROUP, + /* nested; nexthop bucket attributes */ + NHA_RES_BUCKET, + + __NHA_MAX, +}; + +#define NHA_MAX (__NHA_MAX - 1) + +enum { + NHA_RES_GROUP_UNSPEC, + /* Pad attribute for 64-bit alignment. */ + NHA_RES_GROUP_PAD = NHA_RES_GROUP_UNSPEC, + + /* u16; number of nexthop buckets in a resilient nexthop group */ + NHA_RES_GROUP_BUCKETS, + /* clock_t as u32; nexthop bucket idle timer (per-group) */ + NHA_RES_GROUP_IDLE_TIMER, + /* clock_t as u32; nexthop unbalanced timer */ + NHA_RES_GROUP_UNBALANCED_TIMER, + /* clock_t as u64; nexthop unbalanced time */ + NHA_RES_GROUP_UNBALANCED_TIME, + + __NHA_RES_GROUP_MAX, +}; + +#define NHA_RES_GROUP_MAX (__NHA_RES_GROUP_MAX - 1) + +enum { + NHA_RES_BUCKET_UNSPEC, + /* Pad attribute for 64-bit alignment. */ + NHA_RES_BUCKET_PAD = NHA_RES_BUCKET_UNSPEC, + + /* u16; nexthop bucket index */ + NHA_RES_BUCKET_INDEX, + /* clock_t as u64; nexthop bucket idle time */ + NHA_RES_BUCKET_IDLE_TIME, + /* u32; nexthop id assigned to the nexthop bucket */ + NHA_RES_BUCKET_NH_ID, + + __NHA_RES_BUCKET_MAX, +}; + +#define NHA_RES_BUCKET_MAX (__NHA_RES_BUCKET_MAX - 1) + +#endif diff --git a/src/basic/linux/nl80211.h b/src/basic/linux/nl80211.h new file mode 100644 index 0000000..c14a91b --- /dev/null +++ b/src/basic/linux/nl80211.h @@ -0,0 +1,7726 @@ +#ifndef __LINUX_NL80211_H +#define __LINUX_NL80211_H +/* + * 802.11 netlink interface public header + * + * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> + * Copyright 2008 Michael Wu <flamingice@sourmilk.net> + * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> + * Copyright 2008 Michael Buesch <m@bues.ch> + * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> + * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> + * Copyright 2008 Colin McCabe <colin@cozybit.com> + * Copyright 2015-2017 Intel Deutschland GmbH + * Copyright (C) 2018-2022 Intel Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * This header file defines the userspace API to the wireless stack. Please + * be careful not to break things - i.e. don't move anything around or so + * unless you can demonstrate that it breaks neither API nor ABI. + * + * Additions to the API should be accompanied by actual implementations in + * an upstream driver, so that example implementations exist in case there + * are ever concerns about the precise semantics of the API or changes are + * needed, and to ensure that code for dead (no longer implemented) API + * can actually be identified and removed. + * Nonetheless, semantics should also be documented carefully in this file. + */ + +#include <linux/types.h> + +#define NL80211_GENL_NAME "nl80211" + +#define NL80211_MULTICAST_GROUP_CONFIG "config" +#define NL80211_MULTICAST_GROUP_SCAN "scan" +#define NL80211_MULTICAST_GROUP_REG "regulatory" +#define NL80211_MULTICAST_GROUP_MLME "mlme" +#define NL80211_MULTICAST_GROUP_VENDOR "vendor" +#define NL80211_MULTICAST_GROUP_NAN "nan" +#define NL80211_MULTICAST_GROUP_TESTMODE "testmode" + +#define NL80211_EDMG_BW_CONFIG_MIN 4 +#define NL80211_EDMG_BW_CONFIG_MAX 15 +#define NL80211_EDMG_CHANNELS_MIN 1 +#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ + +/** + * DOC: Station handling + * + * Stations are added per interface, but a special case exists with VLAN + * interfaces. When a station is bound to an AP interface, it may be moved + * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). + * The station is still assumed to belong to the AP interface it was added + * to. + * + * Station handling varies per interface type and depending on the driver's + * capabilities. + * + * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS + * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: + * - a setup station entry is added, not yet authorized, without any rate + * or capability information, this just exists to avoid race conditions + * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid + * to add rate and capability information to the station and at the same + * time mark it authorized. + * - %NL80211_TDLS_ENABLE_LINK is then used + * - after this, the only valid operation is to remove it by tearing down + * the TDLS link (%NL80211_TDLS_DISABLE_LINK) + * + * TODO: need more info for other interface types + */ + +/** + * DOC: Frame transmission/registration support + * + * Frame transmission and registration support exists to allow userspace + * management entities such as wpa_supplicant react to management frames + * that are not being handled by the kernel. This includes, for example, + * certain classes of action frames that cannot be handled in the kernel + * for various reasons. + * + * Frame registration is done on a per-interface basis and registrations + * cannot be removed other than by closing the socket. It is possible to + * specify a registration filter to register, for example, only for a + * certain type of action frame. In particular with action frames, those + * that userspace registers for will not be returned as unhandled by the + * driver, so that the registered application has to take responsibility + * for doing that. + * + * The type of frame that can be registered for is also dependent on the + * driver and interface type. The frame types are advertised in wiphy + * attributes so applications know what to expect. + * + * NOTE: When an interface changes type while registrations are active, + * these registrations are ignored until the interface type is + * changed again. This means that changing the interface type can + * lead to a situation that couldn't otherwise be produced, but + * any such registrations will be dormant in the sense that they + * will not be serviced, i.e. they will not receive any frames. + * + * Frame transmission allows userspace to send for example the required + * responses to action frames. It is subject to some sanity checking, + * but many frames can be transmitted. When a frame was transmitted, its + * status is indicated to the sending socket. + * + * For more technical details, see the corresponding command descriptions + * below. + */ + +/** + * DOC: Virtual interface / concurrency capabilities + * + * Some devices are able to operate with virtual MACs, they can have + * more than one virtual interface. The capability handling for this + * is a bit complex though, as there may be a number of restrictions + * on the types of concurrency that are supported. + * + * To start with, each device supports the interface types listed in + * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the + * types there no concurrency is implied. + * + * Once concurrency is desired, more attributes must be observed: + * To start with, since some interface types are purely managed in + * software, like the AP-VLAN type in mac80211 for example, there's + * an additional list of these, they can be added at any time and + * are only restricted by some semantic restrictions (e.g. AP-VLAN + * cannot be added without a corresponding AP interface). This list + * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. + * + * Further, the list of supported combinations is exported. This is + * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, + * it exports a list of "groups", and at any point in time the + * interfaces that are currently active must fall into any one of + * the advertised groups. Within each group, there are restrictions + * on the number of interfaces of different types that are supported + * and also the number of different channels, along with potentially + * some other restrictions. See &enum nl80211_if_combination_attrs. + * + * All together, these attributes define the concurrency of virtual + * interfaces that a given device supports. + */ + +/** + * DOC: packet coalesce support + * + * In most cases, host that receives IPv4 and IPv6 multicast/broadcast + * packets does not do anything with these packets. Therefore the + * reception of these unwanted packets causes unnecessary processing + * and power consumption. + * + * Packet coalesce feature helps to reduce number of received interrupts + * to host by buffering these packets in firmware/hardware for some + * predefined time. Received interrupt will be generated when one of the + * following events occur. + * a) Expiration of hardware timer whose expiration time is set to maximum + * coalescing delay of matching coalesce rule. + * b) Coalescing buffer in hardware reaches it's limit. + * c) Packet doesn't match any of the configured coalesce rules. + * + * User needs to configure following parameters for creating a coalesce + * rule. + * a) Maximum coalescing delay + * b) List of packet patterns which needs to be matched + * c) Condition for coalescence. pattern 'match' or 'no match' + * Multiple such rules can be created. + */ + +/** + * DOC: WPA/WPA2 EAPOL handshake offload + * + * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers + * can indicate they support offloading EAPOL handshakes for WPA/WPA2 + * preshared key authentication in station mode. In %NL80211_CMD_CONNECT + * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers + * supporting this offload may reject the %NL80211_CMD_CONNECT when no + * preshared key material is provided, for example when that driver does + * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. + * + * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be + * set by drivers indicating offload support of the PTK/GTK EAPOL + * handshakes during 802.1X authentication in station mode. In order to + * use the offload the %NL80211_CMD_CONNECT should have + * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this + * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is + * not present. + * + * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers + * can indicate they support offloading EAPOL handshakes for WPA/WPA2 + * preshared key authentication in AP mode. In %NL80211_CMD_START_AP + * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers + * supporting this offload may reject the %NL80211_CMD_START_AP when no + * preshared key material is provided, for example when that driver does + * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. + * + * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK + * using %NL80211_CMD_SET_PMK. For offloaded FT support also + * %NL80211_ATTR_PMKR0_NAME must be provided. + */ + +/** + * DOC: FILS shared key authentication offload + * + * FILS shared key authentication offload can be advertized by drivers by + * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support + * FILS shared key authentication offload should be able to construct the + * authentication and association frames for FILS shared key authentication and + * eventually do a key derivation as per IEEE 802.11ai. The below additional + * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in + * %NL80211_CMD_UPDATE_CONNECT_PARAMS. + * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai + * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai + * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message + * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK + * rIK should be used to generate an authentication tag on the ERP message and + * rMSK should be used to derive a PMKSA. + * rIK, rMSK should be generated and keyname_nai, sequence number should be used + * as specified in IETF RFC 6696. + * + * When FILS shared key authentication is completed, driver needs to provide the + * below additional parameters to userspace, which can be either after setting + * up a connection or after roaming. + * %NL80211_ATTR_FILS_KEK - used for key renewal + * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges + * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated + * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace + * The PMKSA can be maintained in userspace persistently so that it can be used + * later after reboots or wifi turn off/on also. + * + * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS + * capable AP supporting PMK caching. It specifies the scope within which the + * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and + * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based + * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with + * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to + * use in a FILS shared key connection with PMKSA caching. + */ + +/** + * DOC: SAE authentication offload + * + * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they + * support offloading SAE authentication for WPA3-Personal networks in station + * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by + * drivers indicating the offload support in AP mode. + * + * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in + * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode + * respectively. + */ + +/** + * DOC: VLAN offload support for setting group keys and binding STAs to VLANs + * + * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they + * support offloading VLAN functionality in a manner where the driver exposes a + * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs + * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet + * case. Frames received from stations that are not assigned to any VLAN are + * delivered on the main netdev and frames to such stations can be sent through + * that main netdev. + * + * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and + * %NL80211_CMD_SET_STATION will optionally specify vlan_id using + * %NL80211_ATTR_VLAN_ID. + */ + +/** + * DOC: TID configuration + * + * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG + * attribute given in wiphy capabilities. + * + * The necessary configuration parameters are mentioned in + * &enum nl80211_tid_config_attr and it will be passed to the + * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. + * + * If the configuration needs to be applied for specific peer then the MAC + * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the + * configuration will be applied for all the connected peers in the vif except + * any peers that have peer specific configuration for the TID by default; if + * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values + * will be overwritten. + * + * All this configuration is valid only for STA's current connection + * i.e. the configuration will be reset to default when the STA connects back + * after disconnection/roaming, and this configuration will be cleared when + * the interface goes down. + */ + +/** + * DOC: FILS shared key crypto offload + * + * This feature is applicable to drivers running in AP mode. + * + * FILS shared key crypto offload can be advertised by drivers by setting + * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support + * FILS shared key crypto offload should be able to encrypt and decrypt + * association frames for FILS shared key authentication as per IEEE 802.11ai. + * With this capability, for FILS key derivation, drivers depend on userspace. + * + * After FILS key derivation, userspace shares the FILS AAD details with the + * driver and the driver stores the same to use in decryption of association + * request and in encryption of association response. The below parameters + * should be given to the driver in %NL80211_CMD_SET_FILS_AAD. + * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA + * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption + * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption + * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) + * + * Once the association is done, the driver cleans the FILS AAD data. + */ + +/** + * DOC: Multi-Link Operation + * + * In Multi-Link Operation, a connection between to MLDs utilizes multiple + * links. To use this in nl80211, various commands and responses now need + * to or will include the new %NL80211_ATTR_MLO_LINKS attribute. + * Additionally, various commands that need to operate on a specific link + * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to + * use %NL80211_CMD_START_AP or similar functions. + */ + +/** + * enum nl80211_commands - supported nl80211 commands + * + * @NL80211_CMD_UNSPEC: unspecified command to catch errors + * + * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request + * to get a list of all present wiphys. + * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or + * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the + * channel width; this is used for setting monitor mode channel), + * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, + * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or + * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, + * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward + * compatibility only. + * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request + * or rename notification. Has attributes %NL80211_ATTR_WIPHY and + * %NL80211_ATTR_WIPHY_NAME. + * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. + * + * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; + * either a dump request for all interfaces or a specific get with a + * single %NL80211_ATTR_IFINDEX is supported. + * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. + * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response + * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also + * be sent from userspace to request creation of a new virtual interface, + * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and + * %NL80211_ATTR_IFNAME. + * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from + * userspace to request deletion of a virtual interface, then requires + * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are + * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS, + * and if this command is used for the transmitting interface, then all + * the non-transmitting interfaces are deleted as well. + * + * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC + * represents peer's MLD address for MLO pairwise key. For MLO group key, + * the link is identified by %NL80211_ATTR_MLO_LINK_ID. + * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, + * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. + * For MLO connection, the link to set default key is identified by + * %NL80211_ATTR_MLO_LINK_ID. + * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, + * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, + * and %NL80211_ATTR_KEY_SEQ attributes. %NL80211_ATTR_MAC represents + * peer's MLD address for MLO pairwise key. The link to add MLO + * group key is identified by %NL80211_ATTR_MLO_LINK_ID. + * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX + * or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC represents peer's MLD address + * for MLO pairwise key. The link to delete group key is identified by + * %NL80211_ATTR_MLO_LINK_ID. + * + * @NL80211_CMD_GET_BEACON: (not used) + * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface + * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL + * attributes. For drivers that generate the beacon and probe responses + * internally, the following attributes must be provided: %NL80211_ATTR_IE, + * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. + * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters + * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that + * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, + * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, + * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, + * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. + * The channel to use can be set on the interface or be given using the + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the + * attributes determining channel width. + * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP + * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface + * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP + * + * @NL80211_CMD_GET_STATION: Get station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_STATION: Set station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the + * interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all stations, on the interface identified + * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and + * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type + * of disconnection indication should be sent to the station + * (Deauthentication or Disassociation frame and reason code for that + * frame). + * + * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by + * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. + * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by + * %NL80211_ATTR_MAC. + * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the + * interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all mesh paths, on the interface identified + * by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set + * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device + * has a private regulatory domain, it will be returned. Otherwise, the + * global regdomain will be returned. + * A device will have a private regulatory domain if it uses the + * regulatory_hint() API. Even when a private regdomain is used the channel + * information will still be mended according to further hints from + * the regulatory core to help with compliance. A dump version of this API + * is now available which will returns the global regdomain as well as + * all private regdomains of present wiphys (for those that have it). + * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then + * its private regdomain is the only valid one for it. The regulatory + * core is not used to help with compliance in this case. + * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command + * after being queried by the kernel. CRDA replies by sending a regulatory + * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our + * current alpha2 if it found a match. It also provides + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain + * to the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. + * + * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The + * interface is identified with %NL80211_ATTR_IFINDEX and the management + * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be + * added to the end of the specified management frame is specified with + * %NL80211_ATTR_IE. If the command succeeds, the requested data will be + * added to all specified management frames generated by + * kernel/firmware/driver. + * Note: This command has been removed and it is only reserved at this + * point to avoid re-using existing command number. The functionality this + * command was planned for has been provided with cleaner design with the + * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, + * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. + * + * @NL80211_CMD_GET_SCAN: get scan results + * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to + * specify a BSSID to scan for; if not included, the wildcard BSSID will + * be used. + * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to + * NL80211_CMD_GET_SCAN and on the "scan" multicast group) + * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, + * partial scan results may be available + * + * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain + * intervals and certain number of cycles, as specified by + * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is + * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, + * scheduled scan will run in an infinite loop with the specified interval. + * These attributes are mutually exculsive, + * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if + * NL80211_ATTR_SCHED_SCAN_PLANS is defined. + * If for some reason scheduled scan is aborted by the driver, all scan + * plans are canceled (including scan plans that did not start yet). + * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) + * are passed, they are used in the probe requests. For + * broadcast, a broadcast SSID must be passed (ie. an empty + * string). If no SSID is passed, no probe requests are sent and + * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, + * if passed, define which channels should be scanned; if not + * passed, all channels allowed for the current regulatory domain + * are used. Extra IEs can also be passed from the userspace by + * using the %NL80211_ATTR_IE attribute. The first cycle of the + * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY + * is supplied. If the device supports multiple concurrent scheduled + * scans, it will allow such when the caller provides the flag attribute + * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if + * scheduled scan is not running. The caller may assume that as soon + * as the call returns, it is safe to start a new scheduled scan again. + * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan + * results available. + * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has + * stopped. The driver may issue this event at any time during a + * scheduled scan. One reason for stopping the scan is if the hardware + * does not support starting an association or a normal scan while running + * a scheduled scan. This event is also sent when the + * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface + * is brought down while a scheduled scan was running. + * + * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation + * or noise level + * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to + * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) + * + * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC + * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK + * (PMK is used for PTKSA derivation in case of FILS shared key offload) or + * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, + * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS + * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier + * advertized by a FILS capable AP identifying the scope of PMKSA in an + * ESS. + * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, + * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS + * authentication. + * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. + * + * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain + * has been changed and provides details of the request information + * that caused the change such as who initiated the regulatory request + * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx + * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if + * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or + * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain + * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is + * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on + * to (%NL80211_ATTR_REG_ALPHA2). + * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon + * has been found while world roaming thus enabling active scan or + * any mode of operation that initiates TX (beacons) on a channel + * where we would not have been able to do either before. As an example + * if you are world roaming (regulatory domain set to world or if your + * driver is using a custom world roaming regulatory domain) and while + * doing a passive scan on the 5 GHz band you find an AP there (if not + * on a DFS channel) you will now be able to actively scan for that AP + * or use AP mode on your card on that same channel. Note that this will + * never be used for channels 1-11 on the 2 GHz band as they are always + * enabled world wide. This beacon hint is only sent if your device had + * either disabled active scanning or beaconing on a channel. We send to + * userspace the wiphy on which we removed a restriction from + * (%NL80211_ATTR_WIPHY) and the channel on which this occurred + * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) + * the beacon hint was processed. + * + * @NL80211_CMD_AUTHENTICATE: authentication request and notification. + * This command is used both as a command (request to authenticate) and + * as an event on the "mlme" multicast group indicating completion of the + * authentication process. + * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the + * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and + * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify + * the SSID (mainly for association, but is included in authentication + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + + * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the + * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the + * authentication type. %NL80211_ATTR_IE is used to define IEs + * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added + * to the frame. + * When used as an event, this reports reception of an Authentication + * frame in station and IBSS modes when the local MLME processed the + * frame, i.e., it was for the local STA and was received in correct + * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the + * MLME SAP interface (kernel providing MLME, userspace SME). The + * included %NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). This event is + * also used to indicate if the authentication attempt timed out. In that + * case the %NL80211_ATTR_FRAME attribute is replaced with a + * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which + * pending authentication timed out). + * @NL80211_CMD_ASSOCIATE: association request and notification; like + * NL80211_CMD_AUTHENTICATE but for Association and Reassociation + * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, + * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The + * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the + * request is for the initial association to an ESS (that attribute not + * included) or for reassociation within the ESS (that attribute is + * included). + * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like + * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to + * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication + * primitives). + * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like + * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to + * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). + * + * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael + * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the + * event includes %NL80211_ATTR_MAC to describe the source MAC address of + * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key + * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and + * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this + * event matches with MLME-MICHAELMICFAILURE.indication() primitive + * + * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a + * FREQ attribute (for the initial frequency if no peer can be found) + * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those + * should be fixed rather than automatically determined. Can only be + * executed on a network interface that is UP, and fixed BSSID/FREQ + * may be rejected. Another optional parameter is the beacon interval, + * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not + * given defaults to 100 TU (102.4ms). + * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is + * determined by the network interface. + * + * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute + * to identify the device, and the TESTDATA blob attribute to pass through + * to the driver. + * + * @NL80211_CMD_CONNECT: connection request and notification; this command + * requests to connect to a specified network but without separating + * auth and assoc steps. For this, you need to specify the SSID in a + * %NL80211_ATTR_SSID attribute, and can optionally specify the association + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, + * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_WIPHY_FREQ_HINT. + * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are + * restrictions on BSS selection, i.e., they effectively prevent roaming + * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT + * can be included to provide a recommendation of the initial BSS while + * allowing the driver to roam to other BSSes within the ESS and also to + * ignore this recommendation if the indicated BSS is not ideal. Only one + * set of BSSID,frequency parameters is used (i.e., either the enforcing + * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict + * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). + * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if + * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is + * included, these IEs through %NL80211_ATTR_IE are specified by the user + * space based on the best possible BSS selected. Thus, if the driver ends + * up selecting a different BSS, it can modify these IEs accordingly (e.g. + * userspace asks the driver to perform PMKSA caching with BSS1 and the + * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE + * has to get updated with the apt PMKID). + * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within + * the ESS in case the device is already associated and an association with + * a different BSS is desired. + * Background scan period can optionally be + * specified in %NL80211_ATTR_BG_SCAN_PERIOD, + * if not specified default background scan configuration + * in driver is used and if period value is 0, bg scan will be disabled. + * This attribute is ignored if driver does not support roam scan. + * It is also sent as an event, with the BSSID and response IEs when the + * connection is established or failed to be established. This can be + * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success, + * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the + * event, the connection attempt failed due to not being able to initiate + * authentication/association or not receiving a response from the AP. + * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as + * well to remain backwards compatible. + * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. + * When a security association was established on an 802.1X network using + * fast transition, this event should be followed by an + * %NL80211_CMD_PORT_AUTHORIZED event. + * Following a %NL80211_CMD_ROAM event userspace can issue + * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the + * new BSS the card/driver roamed to. + * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify + * userspace that a connection was dropped by the AP or due to other + * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and + * %NL80211_ATTR_REASON_CODE attributes are used. + * + * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices + * associated with this wiphy must be down and will follow. + * + * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified + * channel for the specified amount of time. This can be used to do + * off-channel operations like transmit a Public Action frame and wait for + * a response while being associated to an AP on another channel. + * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus + * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the + * frequency for the operation. + * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds + * to remain on the channel. This command is also used as an event to + * notify when the requested duration starts (it may take a while for the + * driver to schedule this time due to other concurrent needs for the + * radio). + * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) + * that will be included with any events pertaining to this request; + * the cookie is also used to cancel the request. + * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a + * pending remain-on-channel duration if the desired operation has been + * completed prior to expiration of the originally requested duration. + * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the + * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to + * uniquely identify the request. + * This command is also used as an event to notify when a requested + * remain-on-channel duration has expired. + * + * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX + * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface + * and @NL80211_ATTR_TX_RATES the set of allowed rates. + * + * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames + * (via @NL80211_CMD_FRAME) for processing in userspace. This command + * requires an interface index, a frame type attribute (optional for + * backward compatibility reasons, if not given assumes action frames) + * and a match attribute containing the first few bytes of the frame + * that should match, e.g. a single byte for only a category match or + * four bytes for vendor frames including the OUI. The registration + * cannot be dropped, but is removed automatically when the netlink + * socket is closed. Multiple registrations can be made. + * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if + * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which + * case the registration can also be modified to include/exclude the + * flag, rather than requiring unregistration to change it. + * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for + * backward compatibility + * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This + * command is used both as a request to transmit a management frame and + * as an event indicating reception of a frame that was not processed in + * kernel code, but is for us (i.e., which may need to be processed in a + * user space application). %NL80211_ATTR_FRAME is used to specify the + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used + * to indicate on which channel the frame is to be transmitted or was + * received. If this channel is not the current channel (remain-on-channel + * or the operational channel) the device will switch to the given channel + * and transmit the frame, optionally waiting for a response for the time + * specified using %NL80211_ATTR_DURATION. When called, this operation + * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the + * TX status event pertaining to the TX request. + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * management frames at CCK rate or not in 2GHz band. + * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA + * counters which will be updated to the current value. This attribute + * is used during CSA period. + * For TX on an MLD, the frequency can be omitted and the link ID be + * specified, or if transmitting to a known peer MLD (with MLD addresses + * in the frame) both can be omitted and the link will be selected by + * lower layers. + * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may + * be included to indicate the ack TX timestamp. + * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this + * command may be used with the corresponding cookie to cancel the wait + * time if it is known that it is no longer necessary. This command is + * also sent as an event whenever the driver has completed the off-channel + * wait time. + * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. + * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame + * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies + * the TX command and %NL80211_ATTR_FRAME includes the contents of the + * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged + * the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the + * tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to + * indicate the ack RX timestamp. + * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for + * backward compatibility. + * + * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE + * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE + * + * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command + * is used to configure connection quality monitoring notification trigger + * levels. + * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This + * command is used as an event to indicate the that a trigger level was + * reached. + * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ + * and the attributes determining channel width) the given interface + * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. + * In case multiple channels are supported by the device, the mechanism + * with which it switches channels is implementation-defined. + * When a monitor interface is given, it can only switch channel while + * no other interfaces are operating to avoid disturbing the operation + * of any other interfaces, and other interfaces will again take + * precedence when they are used. + * + * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface + * (no longer supported). + * + * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform + * multicast to unicast conversion. When enabled, all multicast packets + * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header) + * will be sent out to each station once with the destination (multicast) + * MAC address replaced by the station's MAC address. Note that this may + * break certain expectations of the receiver, e.g. the ability to drop + * unicast IP packets encapsulated in multicast L2 frames, or the ability + * to not send destination unreachable messages in such cases. + * This can only be toggled per BSS. Configure this on an interface of + * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces + * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode. + * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this + * command, the feature is disabled. + * + * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial + * mesh config parameters may be given. + * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the + * network is determined by the network interface. + * + * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame + * notification. This event is used to indicate that an unprotected + * deauthentication frame was dropped when MFP is in use. + * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame + * notification. This event is used to indicate that an unprotected + * disassociation frame was dropped when MFP is in use. + * + * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a + * beacon or probe response from a compatible mesh peer. This is only + * sent while no station information (sta_info) exists for the new peer + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, + * @NL80211_MESH_SETUP_USERSPACE_AMPE, or + * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this + * notification, userspace may decide to create a new station + * (@NL80211_CMD_NEW_STATION). To stop this notification from + * reoccurring, the userspace authentication daemon may want to create the + * new station with the AUTHENTICATED flag unset and maybe change it later + * depending on the authentication result. + * + * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. + * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. + * Since wireless is more complex than wired ethernet, it supports + * various triggers. These triggers can be configured through this + * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For + * more background information, see + * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. + * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification + * from the driver reporting the wakeup reason. In this case, the + * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason + * for the wakeup, if it was caused by wireless. If it is not present + * in the wakeup notification, the wireless device didn't cause the + * wakeup but reports that it was woken up. + * + * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver + * the necessary information for supporting GTK rekey offload. This + * feature is typically used during WoWLAN. The configuration data + * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and + * contains the data in sub-attributes). After rekeying happened, + * this command may also be sent by the driver as an MLME event to + * inform userspace of the new replay counter. + * + * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace + * of PMKSA caching dandidates. + * + * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * In addition, this can be used as an event to request userspace to take + * actions on TDLS links (set up a new link or tear down an existing one). + * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested + * operation, %NL80211_ATTR_MAC contains the peer MAC address, and + * %NL80211_ATTR_REASON_CODE the reason code to be used (only with + * %NL80211_TDLS_TEARDOWN). + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The + * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be + * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as + * 802.11 management frames, while TDLS action codes (802.11-2012 + * 8.5.13.1) will be encapsulated and sent as data frames. The currently + * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES + * and the currently supported TDLS actions codes are given in + * &enum ieee80211_tdls_actioncode. + * + * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP + * (or GO) interface (i.e. hostapd) to ask for unexpected frames to + * implement sending deauth to stations that send unexpected class 3 + * frames. Also used as the event sent by the kernel when such a frame + * is received. + * For the event, the %NL80211_ATTR_MAC attribute carries the TA and + * other attributes like the interface index are present. + * If used as the command it must have an interface index and you can + * only unsubscribe from the event by closing the socket. Subscription + * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. + * + * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the + * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame + * and wasn't already in a 4-addr VLAN. The event will be sent similarly + * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. + * + * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface + * by sending a null data frame to it and reporting when the frame is + * acknowleged. This is used to allow timing out inactive clients. Uses + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a + * direct reply with an %NL80211_ATTR_COOKIE that is later used to match + * up the event with the request. The event includes the same data and + * has %NL80211_ATTR_ACK set if the frame was ACKed. + * + * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from + * other BSSes when any interfaces are in AP mode. This helps implement + * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME + * messages. Note that per PHY only one application may register. + * + * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether + * No Acknowledgement Policy should be applied. + * + * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels + * independently of the userspace SME, send this event indicating + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the + * attributes determining channel width. This indication may also be + * sent when a remotely-initiated switch (e.g., when a STA receives a CSA + * from the remote AP) is completed; + * + * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch + * has been started on an interface, regardless of the initiator + * (ie. whether it was requested from a remote device or + * initiated on our own). It indicates that + * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ + * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may + * decide to react to this indication by requesting other + * interfaces to change channel as well. + * + * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. It must have been created with + * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the + * P2P Device can be used for P2P operations, e.g. remain-on-channel and + * public action frame TX. + * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. + * + * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to + * notify userspace that AP has rejected the connection request from a + * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON + * is used for this. + * + * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames + * for IBSS or MESH vif. + * + * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. + * This is to be used with the drivers advertising the support of MAC + * address based access control. List of MAC addresses is passed in + * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in + * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it + * is not already done. The new list will replace any existing list. Driver + * will clear its ACL when the list of MAC addresses passed is empty. This + * command is used in AP/P2P GO mode. Driver has to make sure to clear its + * ACL list during %NL80211_CMD_STOP_AP. + * + * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once + * a radar is detected or the channel availability scan (CAC) has finished + * or was aborted, or a radar was detected, usermode will be notified with + * this event. This command is also used to notify userspace about radars + * while operating on this channel. + * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the + * event. + * + * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, + * i.e. features for the nl80211 protocol rather than device features. + * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. + * + * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition + * Information Element to the WLAN driver + * + * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver + * to the supplicant. This will carry the target AP's MAC address along + * with the relevant Information Elements. This event is used to report + * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). + * + * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running + * a critical protocol that needs more reliability in the connection to + * complete. + * + * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can + * return back to normal. + * + * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. + * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. + * + * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the + * new channel information (Channel Switch Announcement - CSA) + * in the beacon for some time (as defined in the + * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the + * new channel. Userspace provides the new channel information (using + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel + * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform + * other station that transmission must be blocked until the channel + * switch is complete. + * + * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified + * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in + * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in + * %NL80211_ATTR_VENDOR_DATA. + * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is + * used in the wiphy data as a nested attribute containing descriptions + * (&struct nl80211_vendor_cmd_info) of the supported vendor commands. + * This may also be sent as an event with the same attributes. + * + * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values. + * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If + * that attribute is not included, QoS mapping is disabled. Since this + * QoS mapping is relevant for IP packets, it is only valid during an + * association. This is cleared on disassociation and AP restart. + * + * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given + * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO + * and %NL80211_ATTR_ADMITTED_TIME parameters. + * Note that the action frame handshake with the AP shall be handled by + * userspace via the normal management RX/TX framework, this only sets + * up the TX TS in the driver/device. + * If the admitted time attribute is not added then the request just checks + * if a subsequent setup could be successful, the intent is to use this to + * avoid setting up a session with the AP when local restrictions would + * make that impossible. However, the subsequent "real" setup may still + * fail even if the check was successful. + * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID + * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this + * before removing a station entry entirely, or before disassociating + * or similar, cleanup will happen in the driver/device in this case. + * + * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and + * bandwidth of a channel must be given. + * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the + * network is determined by the network interface. + * + * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, + * identified by the %NL80211_ATTR_MAC parameter. A target channel is + * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining + * channel width/type. The target operating class is given via + * %NL80211_ATTR_OPER_CLASS. + * The driver is responsible for continually initiating channel-switching + * operations and returning to the base channel for communication with the + * AP. + * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS + * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel + * when this command completes. + * + * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used + * as an event to indicate changes for devices with wiphy-specific regdom + * management. + * + * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is + * not running. The driver indicates the status of the scan through + * cfg80211_scan_done(). + * + * @NL80211_CMD_START_NAN: Start NAN operation, identified by its + * %NL80211_ATTR_WDEV interface. This interface must have been + * previously created with %NL80211_CMD_NEW_INTERFACE. After it + * has been started, the NAN interface will create or join a + * cluster. This command must have a valid + * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional + * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is + * omitted or set to 0, it means don't-care and the device will + * decide what to use. After this command NAN functions can be + * added. + * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by + * its %NL80211_ATTR_WDEV interface. + * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined + * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this + * operation returns the strictly positive and unique instance id + * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) + * of the function upon success. + * Since instance ID's can be re-used, this cookie is the right + * way to identify the function. This will avoid races when a termination + * event is handled by the user space after it has already added a new + * function that got the same instance id from the kernel as the one + * which just terminated. + * This cookie may be used in NAN events even before the command + * returns, so userspace shouldn't process NAN events until it processes + * the response to this command. + * Look at %NL80211_ATTR_SOCKET_OWNER as well. + * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. + * This command is also used as a notification sent when a NAN function is + * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID + * and %NL80211_ATTR_COOKIE attributes. + * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN + * configuration. NAN must be operational (%NL80211_CMD_START_NAN + * was executed). It must contain at least one of the following + * attributes: %NL80211_ATTR_NAN_MASTER_PREF, + * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the + * current configuration is not changed. If it is present but + * set to zero, the configuration is changed to don't-care + * (i.e. the device can decide what to do). + * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. + * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and + * %NL80211_ATTR_COOKIE. + * + * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters + * for subsequent roaming cases if the driver or firmware uses internal + * BSS selection. This command can be issued only while connected and it + * does not result in a change for the current association. Currently, + * only the %NL80211_ATTR_IE data is used and updated with this command. + * + * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 + * for the given authenticator address (specified with %NL80211_ATTR_MAC). + * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the + * PMK-R0, otherwise it specifies the PMK. + * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously + * configured PMK for the authenticator address identified by + * %NL80211_ATTR_MAC. + * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was + * completed successfully. Drivers that support 4 way handshake offload + * should send this event after indicating 802.1X FT assocation with + * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT + * should be indicated instead. + * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request + * and RX notification. This command is used both as a request to transmit + * a control port frame and as a notification that a control port frame + * has been received. %NL80211_ATTR_FRAME is used to specify the + * frame contents. The frame is the raw EAPoL data, without ethernet or + * 802.11 headers. + * For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and + * its effect will depend on the destination: If the destination is known + * to be an MLD, this will be used as a hint to select the link to transmit + * the frame on. If the destination is not an MLD, this will select both + * the link to transmit on and the source address will be set to the link + * address of that link. + * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added + * indicating the protocol type of the received frame; whether the frame + * was received unencrypted and the MAC address of the peer respectively. + * + * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. + * + * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host + * drivers that do not define separate commands for authentication and + * association, but rely on user space for the authentication to happen. + * This interface acts both as the event request (driver to user space) + * to trigger the authentication and command response (userspace to + * driver) to indicate the authentication status. + * + * User space uses the %NL80211_CMD_CONNECT command to the host driver to + * trigger a connection. The host driver selects a BSS and further uses + * this interface to offload only the authentication part to the user + * space. Authentication frames are passed between the driver and user + * space through the %NL80211_CMD_FRAME interface. Host driver proceeds + * further with the association after getting successful authentication + * status. User space indicates the authentication status through + * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH + * command interface. + * + * Host driver reports this status on an authentication failure to the + * user space through the connect result as the user space would have + * initiated the connection through the connect request. + * + * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's + * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, + * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its + * address(specified in %NL80211_ATTR_MAC). + * + * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in + * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. + * + * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s) + * with the given parameters, which are encapsulated in the nested + * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address + * randomization may be enabled and configured by specifying the + * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. + * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. + * A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in + * the netlink extended ack message. + * + * To cancel a measurement, close the socket that requested it. + * + * Measurement results are reported to the socket that requested the + * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they + * become available, so applications must ensure a large enough socket + * buffer size. + * + * Depending on driver support it may or may not be possible to start + * multiple concurrent measurements. + * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the + * result notification from the driver to the requesting socket. + * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that + * the measurement completed, using the measurement cookie + * (%NL80211_ATTR_COOKIE). + * + * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was + * detected and reported by a neighboring device on the channel + * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes + * determining the width and type. + * + * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to + * offload OWE processing to user space. This intends to support + * OWE AKM by the host drivers that implement SME but rely + * on the user space for the cryptographic/DH IE processing in AP mode. + * + * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric + * refreshing, is that from one mesh point we be able to send some data + * frames to other mesh points which are not currently selected as a + * primary traffic path, but which are only 1 hop away. The absence of + * the primary path to the chosen node makes it necessary to apply some + * form of marking on a chosen packet stream so that the packets can be + * properly steered to the selected node for testing, and not by the + * regular mesh path lookup. Further, the packets must be of type data + * so that the rate control (often embedded in firmware) is used for + * rate selection. + * + * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh + * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame + * content. The frame is ethernet data. + * + * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration + * is passed using %NL80211_ATTR_TID_CONFIG attribute. + * + * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon + * frame. This event is used to indicate that a received Beacon frame was + * dropped because it did not include a valid MME MIC while beacon + * protection was enabled (BIGTK configured in station mode). + * + * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control + * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. + * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME + * includes the contents of the frame. %NL80211_ATTR_ACK flag is included + * if the recipient acknowledged the frame. + * + * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is + * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to + * specify the wiphy index to be applied to. + * + * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever + * mac80211/drv detects a bss color collision. + * + * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that + * userspace wants to change the BSS color. + * + * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has + * started + * + * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has + * been aborted + * + * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change + * has completed + * + * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using - + * &NL80211_ATTR_MAC - for STA MAC address + * &NL80211_ATTR_FILS_KEK - for KEK + * &NL80211_ATTR_FILS_NONCES - for FILS Nonces + * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) + * + * @NL80211_CMD_ASSOC_COMEBACK: notification about an association + * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC + * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to + * specify the timeout value. + * + * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The + * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link. + * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come + * without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links + * in preparation for e.g. roaming to a regular (non-MLO) AP. + * + * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station + * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station + * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station + * + * @NL80211_CMD_MAX: highest used command number + * @__NL80211_CMD_AFTER_LAST: internal use + */ +enum nl80211_commands { +/* don't change the order or add anything between, this is ABI! */ + NL80211_CMD_UNSPEC, + + NL80211_CMD_GET_WIPHY, /* can dump */ + NL80211_CMD_SET_WIPHY, + NL80211_CMD_NEW_WIPHY, + NL80211_CMD_DEL_WIPHY, + + NL80211_CMD_GET_INTERFACE, /* can dump */ + NL80211_CMD_SET_INTERFACE, + NL80211_CMD_NEW_INTERFACE, + NL80211_CMD_DEL_INTERFACE, + + NL80211_CMD_GET_KEY, + NL80211_CMD_SET_KEY, + NL80211_CMD_NEW_KEY, + NL80211_CMD_DEL_KEY, + + NL80211_CMD_GET_BEACON, + NL80211_CMD_SET_BEACON, + NL80211_CMD_START_AP, + NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, + NL80211_CMD_STOP_AP, + NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, + + NL80211_CMD_GET_STATION, + NL80211_CMD_SET_STATION, + NL80211_CMD_NEW_STATION, + NL80211_CMD_DEL_STATION, + + NL80211_CMD_GET_MPATH, + NL80211_CMD_SET_MPATH, + NL80211_CMD_NEW_MPATH, + NL80211_CMD_DEL_MPATH, + + NL80211_CMD_SET_BSS, + + NL80211_CMD_SET_REG, + NL80211_CMD_REQ_SET_REG, + + NL80211_CMD_GET_MESH_CONFIG, + NL80211_CMD_SET_MESH_CONFIG, + + NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, + + NL80211_CMD_GET_REG, + + NL80211_CMD_GET_SCAN, + NL80211_CMD_TRIGGER_SCAN, + NL80211_CMD_NEW_SCAN_RESULTS, + NL80211_CMD_SCAN_ABORTED, + + NL80211_CMD_REG_CHANGE, + + NL80211_CMD_AUTHENTICATE, + NL80211_CMD_ASSOCIATE, + NL80211_CMD_DEAUTHENTICATE, + NL80211_CMD_DISASSOCIATE, + + NL80211_CMD_MICHAEL_MIC_FAILURE, + + NL80211_CMD_REG_BEACON_HINT, + + NL80211_CMD_JOIN_IBSS, + NL80211_CMD_LEAVE_IBSS, + + NL80211_CMD_TESTMODE, + + NL80211_CMD_CONNECT, + NL80211_CMD_ROAM, + NL80211_CMD_DISCONNECT, + + NL80211_CMD_SET_WIPHY_NETNS, + + NL80211_CMD_GET_SURVEY, + NL80211_CMD_NEW_SURVEY_RESULTS, + + NL80211_CMD_SET_PMKSA, + NL80211_CMD_DEL_PMKSA, + NL80211_CMD_FLUSH_PMKSA, + + NL80211_CMD_REMAIN_ON_CHANNEL, + NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, + + NL80211_CMD_SET_TX_BITRATE_MASK, + + NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_FRAME, + NL80211_CMD_ACTION = NL80211_CMD_FRAME, + NL80211_CMD_FRAME_TX_STATUS, + NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, + + NL80211_CMD_SET_POWER_SAVE, + NL80211_CMD_GET_POWER_SAVE, + + NL80211_CMD_SET_CQM, + NL80211_CMD_NOTIFY_CQM, + + NL80211_CMD_SET_CHANNEL, + NL80211_CMD_SET_WDS_PEER, + + NL80211_CMD_FRAME_WAIT_CANCEL, + + NL80211_CMD_JOIN_MESH, + NL80211_CMD_LEAVE_MESH, + + NL80211_CMD_UNPROT_DEAUTHENTICATE, + NL80211_CMD_UNPROT_DISASSOCIATE, + + NL80211_CMD_NEW_PEER_CANDIDATE, + + NL80211_CMD_GET_WOWLAN, + NL80211_CMD_SET_WOWLAN, + + NL80211_CMD_START_SCHED_SCAN, + NL80211_CMD_STOP_SCHED_SCAN, + NL80211_CMD_SCHED_SCAN_RESULTS, + NL80211_CMD_SCHED_SCAN_STOPPED, + + NL80211_CMD_SET_REKEY_OFFLOAD, + + NL80211_CMD_PMKSA_CANDIDATE, + + NL80211_CMD_TDLS_OPER, + NL80211_CMD_TDLS_MGMT, + + NL80211_CMD_UNEXPECTED_FRAME, + + NL80211_CMD_PROBE_CLIENT, + + NL80211_CMD_REGISTER_BEACONS, + + NL80211_CMD_UNEXPECTED_4ADDR_FRAME, + + NL80211_CMD_SET_NOACK_MAP, + + NL80211_CMD_CH_SWITCH_NOTIFY, + + NL80211_CMD_START_P2P_DEVICE, + NL80211_CMD_STOP_P2P_DEVICE, + + NL80211_CMD_CONN_FAILED, + + NL80211_CMD_SET_MCAST_RATE, + + NL80211_CMD_SET_MAC_ACL, + + NL80211_CMD_RADAR_DETECT, + + NL80211_CMD_GET_PROTOCOL_FEATURES, + + NL80211_CMD_UPDATE_FT_IES, + NL80211_CMD_FT_EVENT, + + NL80211_CMD_CRIT_PROTOCOL_START, + NL80211_CMD_CRIT_PROTOCOL_STOP, + + NL80211_CMD_GET_COALESCE, + NL80211_CMD_SET_COALESCE, + + NL80211_CMD_CHANNEL_SWITCH, + + NL80211_CMD_VENDOR, + + NL80211_CMD_SET_QOS_MAP, + + NL80211_CMD_ADD_TX_TS, + NL80211_CMD_DEL_TX_TS, + + NL80211_CMD_GET_MPP, + + NL80211_CMD_JOIN_OCB, + NL80211_CMD_LEAVE_OCB, + + NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, + + NL80211_CMD_TDLS_CHANNEL_SWITCH, + NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, + + NL80211_CMD_WIPHY_REG_CHANGE, + + NL80211_CMD_ABORT_SCAN, + + NL80211_CMD_START_NAN, + NL80211_CMD_STOP_NAN, + NL80211_CMD_ADD_NAN_FUNCTION, + NL80211_CMD_DEL_NAN_FUNCTION, + NL80211_CMD_CHANGE_NAN_CONFIG, + NL80211_CMD_NAN_MATCH, + + NL80211_CMD_SET_MULTICAST_TO_UNICAST, + + NL80211_CMD_UPDATE_CONNECT_PARAMS, + + NL80211_CMD_SET_PMK, + NL80211_CMD_DEL_PMK, + + NL80211_CMD_PORT_AUTHORIZED, + + NL80211_CMD_RELOAD_REGDB, + + NL80211_CMD_EXTERNAL_AUTH, + + NL80211_CMD_STA_OPMODE_CHANGED, + + NL80211_CMD_CONTROL_PORT_FRAME, + + NL80211_CMD_GET_FTM_RESPONDER_STATS, + + NL80211_CMD_PEER_MEASUREMENT_START, + NL80211_CMD_PEER_MEASUREMENT_RESULT, + NL80211_CMD_PEER_MEASUREMENT_COMPLETE, + + NL80211_CMD_NOTIFY_RADAR, + + NL80211_CMD_UPDATE_OWE_INFO, + + NL80211_CMD_PROBE_MESH_LINK, + + NL80211_CMD_SET_TID_CONFIG, + + NL80211_CMD_UNPROT_BEACON, + + NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, + + NL80211_CMD_SET_SAR_SPECS, + + NL80211_CMD_OBSS_COLOR_COLLISION, + + NL80211_CMD_COLOR_CHANGE_REQUEST, + + NL80211_CMD_COLOR_CHANGE_STARTED, + NL80211_CMD_COLOR_CHANGE_ABORTED, + NL80211_CMD_COLOR_CHANGE_COMPLETED, + + NL80211_CMD_SET_FILS_AAD, + + NL80211_CMD_ASSOC_COMEBACK, + + NL80211_CMD_ADD_LINK, + NL80211_CMD_REMOVE_LINK, + + NL80211_CMD_ADD_LINK_STA, + NL80211_CMD_MODIFY_LINK_STA, + NL80211_CMD_REMOVE_LINK_STA, + + /* add new commands above here */ + + /* used to define NL80211_CMD_MAX below */ + __NL80211_CMD_AFTER_LAST, + NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 +}; + +/* + * Allow user space programs to use #ifdef on new commands by defining them + * here + */ +#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS +#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE +#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE +#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE +#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE +#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE +#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE +#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT + +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + +/* source-level API compatibility */ +#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG +#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG +#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE + +/** + * enum nl80211_attrs - nl80211 netlink attributes + * + * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors + * + * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. + * /sys/class/ieee80211/<phyname>/index + * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) + * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters + * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, + * defines the channel together with the (deprecated) + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes + * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 + * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values + * of &enum nl80211_chan_width, describing the channel width. See the + * documentation of the enum for more information. + * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the + * channel, used for anything but 20 MHz bandwidth. In S1G this is the + * operating channel center frequency. + * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the + * channel, used only for 80+80 MHz bandwidth + * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ + * if HT20 or HT40 are to be used (i.e., HT disabled if not included): + * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including + * this attribute) + * NL80211_CHAN_HT20 = HT20 only + * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel + * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * This attribute is now deprecated. + * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is + * less than or equal to the RTS threshold; allowed range: 1..255; + * dot11ShortRetryLimit; u8 + * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is + * greater than the RTS threshold; allowed range: 1..255; + * dot11ShortLongLimit; u8 + * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum + * length in octets for frames; allowed range: 256..8000, disable + * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 + * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length + * larger than or equal to this use RTS/CTS handshake); allowed range: + * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 + * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 + * section 7.3.2.9; dot11CoverageClass; u8 + * + * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on + * @NL80211_ATTR_IFNAME: network interface name + * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype + * + * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices + * that don't have a netdev (u64) + * + * @NL80211_ATTR_MAC: MAC address (various uses) + * + * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) + * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key + * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the + * default management key + * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or + * other commands, indicates which pairwise cipher suites are used + * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or + * other commands, indicates which group cipher suite is used + * + * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU + * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing + * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE + * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE + * + * @NL80211_ATTR_STA_AID: Association ID for the station (u16) + * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) + * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by + * IEEE 802.11 7.3.1.6 (u16). + * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported + * rates as defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station + * to, or the AP interface the station was originally added to. + * @NL80211_ATTR_STA_INFO: information about a station, part of station info + * given for %NL80211_CMD_GET_STATION, nested attribute containing + * info as possible, see &enum nl80211_sta_info. + * + * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, + * consisting of a nested array. + * + * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). + * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link + * (see &enum nl80211_plink_action). + * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. + * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path + * info given for %NL80211_CMD_GET_MPATH, nested attribute described at + * &enum nl80211_mpath_info. + * + * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_mntr_flags. + * + * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11 country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. + * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory + * rules. + * + * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic + * rates in format defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * + * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all + * supported interface types, each a flag attribute with the number + * of the interface mode. + * + * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for + * %NL80211_CMD_SET_MGMT_EXTRA_IE. + * + * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with + * %NL80211_CMD_SET_MGMT_EXTRA_IE). + * + * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with + * a single scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can + * scan with a single scheduled scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements + * that can be added to a scan request + * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information + * elements that can be added to a scheduled scan request + * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be + * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. + * + * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) + * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive + * scanning and include a zero-length SSID (wildcard) for wildcard scan + * @NL80211_ATTR_BSS: scan result BSS + * + * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain + * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* + * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently + * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) + * + * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies + * an array of command numbers (i.e. a mapping index to command number) + * that the driver for the given wiphy supports. + * + * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header + * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and + * NL80211_CMD_ASSOCIATE events + * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) + * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, + * represented as a u32 + * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and + * %NL80211_CMD_DISASSOCIATE, u16 + * + * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as + * a u32 + * + * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _before_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _after_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * + * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported + * cipher suites + * + * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look + * for other networks on different channels + * + * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this + * is used, e.g., with %NL80211_CMD_AUTHENTICATE event + * + * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is + * used for the association (&enum nl80211_mfp, represented as a u32); + * this attribute can be used with %NL80211_CMD_ASSOCIATE and + * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for + * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it + * must have decided whether to use management frame protection or not. + * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will + * let the driver (or the firmware) decide whether to use MFP or not. + * + * @NL80211_ATTR_STA_FLAGS2: Attribute containing a + * &struct nl80211_sta_flag_update. + * + * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls + * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in + * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE + * request, the driver will assume that the port is unauthorized until + * authorized by user space. Otherwise, port is marked authorized by + * default in station mode. + * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the + * ethertype that will be used for key negotiation. It can be + * specified with the associate and connect commands. If it is not + * specified, the value defaults to 0x888E (PAE, 802.1X). This + * attribute is also used as a flag in the wiphy information to + * indicate that protocols other than PAE are supported. + * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom + * ethertype frames used for key negotiation must not be encrypted. + * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control + * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) + * will be sent directly to the network interface or sent via the NL80211 + * socket. If this attribute is missing, then legacy behavior of sending + * control port frames directly to the network interface is used. If the + * flag is included, then control port frames are sent over NL80211 instead + * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is + * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER + * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth + * frames are not forwared over the control port. + * + * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. + * We recommend using nested, driver-specific attributes within this. + * + * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT + * event was due to the AP disconnecting the station, and not due to + * a local disconnect request. + * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT + * event (u16) + * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating + * that protected APs should be used. This is also used with NEW_BEACON to + * indicate that the BSS is to use protection. + * + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON + * to indicate which unicast key ciphers will be used with the connection + * (an array of u32). + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which group key cipher will be used with the connection (a + * u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which WPA version(s) the AP we want to associate with is using + * (a u32 with flags from &enum nl80211_wpa_versions). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which key management algorithm(s) to use (an array of u32). + * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY, + * indicating the supported AKM suites, intended for specific drivers which + * implement SME and have constraints on which AKMs are supported and also + * the cases where an AKM support is offloaded to the driver/firmware. + * If there is no such notification from the driver, user space should + * assume the driver supports all the AKM suites. + * + * @NL80211_ATTR_REQ_IE: (Re)association request information elements as + * sent out by the card, for ROAM and successful CONNECT events. + * @NL80211_ATTR_RESP_IE: (Re)association response information elements as + * sent by peer, for ROAM and successful CONNECT events. + * + * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT + * commands to specify a request to reassociate within an ESS, i.e., to use + * Reassociate Request frame (with the value of this attribute in the + * Current AP address field) instead of Association Request frame which is + * used for the initial association to an ESS. + * + * @NL80211_ATTR_KEY: key information in a nested attribute with + * %NL80211_KEY_* sub-attributes + * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() + * and join_ibss(), key information is in a nested attribute each + * with %NL80211_KEY_* sub-attributes + * + * @NL80211_ATTR_PID: Process ID of a network namespace. + * + * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for + * dumps. This number increases whenever the object list being + * dumped changes, and as such userspace can verify that it has + * obtained a complete and consistent snapshot by verifying that + * all dump messages contain the same generation number. If it + * changed then the list changed and the dump should be repeated + * completely from scratch. + * + * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface + * + * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of + * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute + * containing info as possible, see &enum survey_info. + * + * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. + * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can + * cache, a wiphy attribute. + * + * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. + * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that + * specifies the maximum duration that can be requested with the + * remain-on-channel operation, in milliseconds, u32. + * + * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. + * + * @NL80211_ATTR_TX_RATES: Nested set of attributes + * (enum nl80211_tx_rate_attributes) describing TX rates per band. The + * enum nl80211_band value is used as the index (nla_type() of the nested + * data. If a band is not included, it will be configured to allow all + * rates based on negotiated supported rates information. This attribute + * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, + * and joining mesh networks (not IBSS yet). In the later case, it must + * specify just a single bitrate, which is to be used for the beacon. + * The driver must also specify support for this with the extended + * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + * NL80211_EXT_FEATURE_BEACON_RATE_HT, + * NL80211_EXT_FEATURE_BEACON_RATE_VHT and + * NL80211_EXT_FEATURE_BEACON_RATE_HE. + * + * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain + * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. + * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the + * @NL80211_CMD_REGISTER_FRAME command. + * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be transmitted with + * %NL80211_CMD_FRAME. + * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be registered for RX. + * + * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was + * acknowledged by the recipient. + * + * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. + * + * @NL80211_ATTR_CQM: connection quality monitor configuration in a + * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. + * + * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command + * is requesting a local authentication/association state change without + * invoking actual management frame exchange. This can be used with + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, + * NL80211_CMD_DISASSOCIATE. + * + * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations + * connected to this BSS. + * + * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See + * &enum nl80211_tx_power_setting for possible values. + * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. + * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING + * for non-automatic settings. + * + * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly + * means support for per-station GTKs. + * + * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. + * This can be used to mask out antennas which are not attached or should + * not be used for transmitting. If an antenna is not selected in this + * bitmap the hardware is not allowed to transmit on this antenna. + * + * Each bit represents one antenna, starting with antenna 1 at the first + * bit. Depending on which antennas are selected in the bitmap, 802.11n + * drivers can derive which chainmasks to use (if all antennas belonging to + * a particular chain are disabled this chain should be disabled) and if + * a chain has diversity antennas wether diversity should be used or not. + * HT capabilities (STBC, TX Beamforming, Antenna selection) can be + * derived from the available chains after applying the antenna mask. + * Non-802.11n drivers can derive wether to use diversity or not. + * Drivers may reject configurations or RX/TX mask combinations they cannot + * support by returning -EINVAL. + * + * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. + * This can be used to mask out antennas which are not attached or should + * not be used for receiving. If an antenna is not selected in this bitmap + * the hardware should not be configured to receive on this antenna. + * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. + * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available + * for configuration as TX antennas via the above parameters. + * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available + * for configuration as RX antennas via the above parameters. + * + * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS + * + * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be + * transmitted on another channel when the channel given doesn't match + * the current channel. If the current channel doesn't match and this + * flag isn't set, the frame will be rejected. This is also used as an + * nl80211 capability flag. + * + * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) + * + * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * + * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be + * changed once the mesh is active. + * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute + * containing attributes from &enum nl80211_meshconf_params. + * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver + * allows auth frames in a mesh to be passed to userspace for processing via + * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in + * &enum nl80211_plink_state. Used when userspace is driving the peer link + * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or + * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. + * + * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy + * capabilities, the supported WoWLAN triggers + * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to + * indicate which WoW triggers should be enabled. This is also + * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN + * triggers. + * + * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan + * cycles, in msecs. + * + * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more + * sets of attributes to match during scheduled scans. Only BSSs + * that match any of the sets will be reported. These are + * pass-thru filter rules. + * For a match to succeed, the BSS must match all attributes of a + * set. Since not every hardware supports matching all types of + * attributes, there is no guarantee that the reported BSSs are + * fully complying with the match sets and userspace needs to be + * able to ignore them by itself. + * Thus, the implementation is somewhat hardware-dependent, but + * this is only an optimization and the userspace application + * needs to handle all the non-filtered results anyway. + * If the match attributes don't make sense when combined with + * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID + * is included in the probe request, but the match attributes + * will never let it go through), -EINVAL may be returned. + * If omitted, no filtering is done. + * + * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported + * interface combinations. In each nested item, it contains attributes + * defined in &enum nl80211_if_combination_attrs. + * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like + * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that + * are managed in software: interfaces of these types aren't subject to + * any restrictions in their number or combinations. + * + * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. + * + * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, + * nested array attribute containing an entry for each band, with the entry + * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but + * without the length restriction (at most %NL80211_MAX_SUPP_RATES). + * + * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon + * and Probe Response (when response to wildcard Probe Request); see + * &enum nl80211_hidden_ssid, represented as a u32 + * + * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. + * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to + * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the + * driver (or firmware) replies to Probe Request frames. + * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association + * Response frames. This is used with %NL80211_CMD_NEW_BEACON and + * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into + * (Re)Association Response frames when the driver (or firmware) replies to + * (Re)Association Request frames. + * + * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration + * of the station, see &enum nl80211_sta_wme_attr. + * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working + * as AP. + * + * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of + * roaming to another AP in the same ESS if the signal lever is low. + * + * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching + * candidate information, see &enum nl80211_pmksa_candidate_attr. + * + * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not + * for management frames transmission. In order to avoid p2p probe/action + * frames are being transmitted at CCK rate in 2GHz band, the user space + * applications use this attribute. + * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and + * %NL80211_CMD_FRAME commands. + * + * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup + * request, link setup confirm, link teardown, etc.). Values are + * described in the TDLS (802.11z) specification. + * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a + * TDLS conversation between two devices. + * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see + * &enum nl80211_tdls_operation, represented as a u8. + * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate + * as a TDLS peer sta. + * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown + * procedures should be performed by sending TDLS packets via + * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be + * used for asking the driver to perform a TDLS operation. + * + * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices + * that have AP support to indicate that they have the AP SME integrated + * with support for the features listed in this attribute, see + * &enum nl80211_ap_sme_features. + * + * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells + * the driver to not wait for an acknowledgement. Note that due to this, + * it will also not give a status callback nor return a cookie. This is + * mostly useful for probe responses to save airtime. + * + * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from + * &enum nl80211_feature_flags and is advertised in wiphy information. + * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe + * requests while operating in AP-mode. + * This attribute holds a bitmap of the supported protocols for + * offloading (see &enum nl80211_probe_resp_offload_support_attr). + * + * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire + * probe-response frame. The DA field in the 802.11 header is zero-ed out, + * to be filled by the FW. + * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the + * ATTR_HT_CAPABILITY to which attention should be paid. + * Currently, only mac80211 NICs support this feature. + * The values that may be configured are: + * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 + * AMPDU density and AMPDU factor. + * All values are treated as suggestions and may be ignored + * by the driver as required. The actual values may be seen in + * the station debugfs ht_caps file. + * + * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country + * abides to when initiating radiation on DFS channels. A country maps + * to one DFS region. + * + * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of + * up to 16 TIDs. + * + * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be + * used by the drivers which has MLME in firmware and does not have support + * to report per station tx/rx activity to free up the station entry from + * the list. This needs to be used when the driver advertises the + * capability to timeout the stations. + * + * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); + * this attribute is (depending on the driver capabilities) added to + * received frames indicated with %NL80211_CMD_FRAME. + * + * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds + * or 0 to disable background scan. + * + * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from + * userspace. If unset it is assumed the hint comes directly from + * a user. If set code could specify exactly what type of source + * was used to provide the hint. For the different types of + * allowed user regulatory hints see nl80211_user_reg_hint_type. + * + * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected + * the connection request from a station. nl80211_connect_failed_reason + * enum has different reasons of connection failure. + * + * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames. + * This contains the authentication frame body (non-IE and IE data), + * excluding the Authentication algorithm number, i.e., starting at the + * Authentication transaction sequence number field. It is used with + * authentication algorithms that need special fields to be added into + * the frames (SAE and FILS). Currently, only the SAE cases use the + * initial two fields (Authentication transaction sequence number and + * Status code). However, those fields are included in the attribute data + * for all authentication algorithms to keep the attribute definition + * consistent. + * + * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) + * + * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with + * the START_AP and SET_BSS commands + * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the + * START_AP and SET_BSS commands. This can have the values 0 or 1; + * if not given in START_AP 0 is assumed, if not given in SET_BSS + * no change is made. + * + * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode + * defined in &enum nl80211_mesh_power_mode. + * + * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, + * carried in a u32 attribute + * + * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for + * MAC ACL. + * + * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum + * number of MAC addresses that a device can support for MAC + * ACL. + * + * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, + * contains a value of enum nl80211_radar_event (u32). + * + * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver + * has and handles. The format is the same as the IE contents. See + * 802.11-2012 8.4.2.29 for more information. + * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver + * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. + * + * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to + * the driver, e.g., to enable TDLS power save (PU-APSD). + * + * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are + * advertised to the driver, e.g., to enable TDLS off channel operations + * and PU-APSD. + * + * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see + * &enum nl80211_protocol_features, the attribute is a u32. + * + * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports + * receiving the data for a single wiphy split across multiple + * messages, given with wiphy dump message + * + * @NL80211_ATTR_MDID: Mobility Domain Identifier + * + * @NL80211_ATTR_IE_RIC: Resource Information Container Information + * Element + * + * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased + * reliability, see &enum nl80211_crit_proto_id (u16). + * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which + * the connection should have increased reliability (u16). + * + * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). + * This is similar to @NL80211_ATTR_STA_AID but with a difference of being + * allowed to be used with the first @NL80211_CMD_SET_STATION command to + * update a TDLS peer STA entry. + * + * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. + * + * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's + * until the channel switch event. + * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission + * must be blocked on the current channel (before the channel switch + * operation). Also included in the channel switch started event if quiet + * was requested by the AP. + * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information + * for the time while performing a channel switch. + * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel + * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel + * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP). + * + * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. + * As specified in the &enum nl80211_rxmgmt_flags. + * + * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. + * + * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported + * operating classes. + * + * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space + * controls DFS operation in IBSS mode. If the flag is included in + * %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS + * channels and reports radar events to userspace. Userspace is required + * to react to radar events, e.g. initiate a channel switch or leave the + * IBSS network. + * + * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports + * 5 MHz channel bandwidth. + * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports + * 10 MHz channel bandwidth. + * + * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode + * Notification Element based on association request when used with + * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when + * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS); + * u8 attribute. + * + * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if + * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) + * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command + * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this + * attribute is also used for vendor command feature advertisement + * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy + * info, containing a nested array of possible events + * + * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This + * data is in the format defined for the payload of the QoS Map Set element + * in IEEE Std 802.11-2012, 8.4.2.97. + * + * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS + * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS + * + * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many + * associated stations are supported in AP mode (including P2P GO); u32. + * Since drivers may not have a fixed limit on the maximum number (e.g., + * other concurrent operations may affect this), drivers are allowed to + * advertise values that cannot always be met. In such cases, an attempt + * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. + * + * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which + * should be updated when the frame is transmitted. + * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum + * supported number of csa counters. + * + * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. + * As specified in the &enum nl80211_tdls_peer_capability. + * + * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface + * creation then the new interface will be owned by the netlink socket + * that created it and will be destroyed when the socket is closed. + * If set during scheduled scan start then the new scan req will be + * owned by the netlink socket that created it and the scheduled scan will + * be stopped when the socket is closed. + * If set during configuration of regulatory indoor operation then the + * regulatory indoor configuration would be owned by the netlink socket + * that configured the indoor setting, and the indoor operation would be + * cleared when the socket is closed. + * If set during NAN interface creation, the interface will be destroyed + * if the socket is closed just like any other interface. Moreover, NAN + * notifications will be sent in unicast to that socket. Without this + * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN + * multicast group. + * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the + * station will deauthenticate when the socket is closed. + * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically + * torn down when the socket is closed. + * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be + * automatically torn down when the socket is closed. + * If set during %NL80211_CMD_START_AP the AP will be automatically + * disabled when the socket is closed. + * + * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is + * the TDLS link initiator. + * + * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection + * shall support Radio Resource Measurements (11k). This attribute can be + * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. + * User space applications are expected to use this flag only if the + * underlying device supports these minimal RRM features: + * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, + * %NL80211_FEATURE_QUIET, + * Or, if global RRM is supported, see: + * %NL80211_EXT_FEATURE_RRM + * If this flag is used, driver must add the Power Capabilities IE to the + * association request. In addition, it must also set the RRM capability + * flag in the association request's Capability Info field. + * + * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout + * estimation algorithm (dynack). In order to activate dynack + * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower + * drivers to indicate dynack capability. Dynack is automatically disabled + * setting valid value for coverage class. + * + * @NL80211_ATTR_TSID: a TSID value (u8 attribute) + * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) + * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds + * (per second) (u16 attribute) + * + * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see + * &enum nl80211_smps_mode. + * + * @NL80211_ATTR_OPER_CLASS: operating class + * + * @NL80211_ATTR_MAC_MASK: MAC address mask + * + * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device + * is self-managing its regulatory information and any regulatory domain + * obtained from it is coming from the device's wiphy and not the global + * cfg80211 regdomain. + * + * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte + * array. The feature flags are identified by their bit index (see &enum + * nl80211_ext_feature_index). The bit index is ordered starting at the + * least-significant bit of the first byte in the array, ie. bit index 0 + * is located at bit 0 of byte 0. bit index 25 would be located at bit 1 + * of byte 3 (u8 array). + * + * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be + * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY + * may return a survey entry without a channel indicating global radio + * statistics (only some values are valid and make sense.) + * For devices that don't return such an entry even then, the information + * should be contained in the result as the sum of the respective counters + * over all channels. + * + * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a + * scheduled scan is started. Or the delay before a WoWLAN + * net-detect scan is started, counting from the moment the + * system is suspended. This value is a u32, in seconds. + + * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device + * is operating in an indoor environment. + * + * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for + * scheduled scan supported by the device (u32), a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for + * a scan plan (u32), a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in + * a scan plan (u32), a wiphy attribute. + * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. + * Each scan plan defines the number of scan iterations and the interval + * between scans. The last scan plan will always run infinitely, + * thus it must not specify the number of iterations, only the interval + * between scans. The scan plans are executed sequentially. + * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. + * @NL80211_ATTR_PBSS: flag attribute. If set it means operate + * in a PBSS. Specified in %NL80211_CMD_CONNECT to request + * connecting to a PCP, and in %NL80211_CMD_START_AP to start + * a PCP instead of AP. Relevant for DMG networks only. + * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the + * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains + * attributes according &enum nl80211_bss_select_attr to indicate what + * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT + * it contains the behaviour-specific attribute containing the parameters for + * BSS selection to be done by driver and/or firmware. + * + * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported + * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status + * + * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment + * + * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: + * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, + * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and + * other interface-type specific capabilities per interface type. For MLO, + * %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are + * present. + * + * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO + * groupID for monitor mode. + * The first 8 bytes are a mask that defines the membership in each + * group (there are 64 groups, group 0 and 63 are reserved), + * each bit represents a group and set to 1 for being a member in + * that group and 0 for not being a member. + * The remaining 16 bytes define the position in each group: 2 bits for + * each group. + * (smaller group numbers represented on most significant bits and bigger + * group numbers on least significant bits.) + * This attribute is used only if all interfaces are in monitor mode. + * Set this attribute in order to monitor packets using the given MU-MIMO + * groupID data. + * to turn off that feature set all the bits of the groupID to zero. + * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow + * when using MU-MIMO air sniffer. + * to turn that feature off set an invalid mac address + * (e.g. FF:FF:FF:FF:FF:FF) + * + * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually + * started (u64). The time is the TSF of the BSS the interface that + * requested the scan is connected to (if available, otherwise this + * attribute must not be included). + * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which + * %NL80211_ATTR_SCAN_START_TIME_TSF is set. + * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If + * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the + * maximum measurement duration allowed. This attribute is used with + * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN + * if the scan is used for beacon report radio measurement. + * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates + * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is + * mandatory. If this flag is not set, the duration is the maximum duration + * and the actual measurement duration may be shorter. + * + * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is + * used to pull the stored data for mesh peer in power save state. + * + * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by + * %NL80211_CMD_START_NAN and optionally with + * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. + * Also, values 1 and 255 are reserved for certification purposes and + * should not be used during a normal device operation. + * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32 + * bitmask of BIT(NL80211_BAND_*) as described in %enum + * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0 + * would be set. This attribute is used with + * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and + * it is optional. If no bands are set, it means don't-care and + * the device will decide what to use. + * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See + * &enum nl80211_nan_func_attributes for description of this nested + * attribute. + * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. + * See &enum nl80211_nan_match_attributes. + * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame + * protection. + * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association + * Request/Response frame protection. This attribute contains the 16 octet + * STA Nonce followed by 16 octets of AP Nonce. + * + * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast + * packets should be send out as unicast to all stations (flag attribute). + * + * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also + * used in various commands/events for specifying the BSSID. + * + * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which + * other BSSs has to be better or slightly worse than the current + * connected BSS so that they get reported to user space. + * This will give an opportunity to userspace to consider connecting to + * other matching BSSs which have better or slightly worse RSSI than + * the current connected BSS by using an offloaded operation to avoid + * unnecessary wakeups. + * + * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in + * the specified band is to be adjusted before doing + * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out + * better BSSs. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * + * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out. + * u32 attribute with an &enum nl80211_timeout_reason value. This is used, + * e.g., with %NL80211_CMD_CONNECT event. + * + * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP) + * username part of NAI used to refer keys rRK and rIK. This is used with + * %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part + * of NAI specifying the domain name of the ER server. This is used with + * %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number + * to use in ERP messages. This is used in generating the FILS wrapped data + * for FILS authentication and is used with %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the + * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and + * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK + * from successful FILS authentication and is used with + * %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP + * identifying the scope of PMKSAs. This is used with + * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. + * + * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with + * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. + * For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide + * PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X + * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT + * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME + * is included as well. + * + * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to + * indicate that it supports multiple active scheduled scan requests. + * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled + * scan request that may be active for the device (u32). + * + * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include + * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it + * wants to use the supported offload of the 4-way handshake. + * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. + * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) + * + * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external + * authentication operation (u32 attribute with an + * &enum nl80211_external_auth_action value). This is used with the + * %NL80211_CMD_EXTERNAL_AUTH request event. + * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user + * space supports external authentication. This attribute shall be used + * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver + * may offload authentication processing to user space if this capability + * is indicated in the respective requests from the user space. (This flag + * attribute deprecated for %NL80211_CMD_START_AP, use + * %NL80211_ATTR_AP_SETTINGS_FLAGS) + * + * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this + * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. + * + * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum + * nl80211_txq_stats) + * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. + * The smaller of this and the memory limit is enforced. + * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the + * TXQ queues for this phy. The smaller of this and the packet limit is + * enforced. + * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes + * a flow is assigned on each round of the DRR scheduler. + * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if %NL80211_STA_FLAG_WME is set. + * + * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include + * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing + * measurement (FTM) responder functionality and containing parameters as + * possible, see &enum nl80211_ftm_responder_attr + * + * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder + * statistics, see &enum nl80211_ftm_responder_stats. + * + * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32), + * if the attribute is not given no timeout is requested. Note that 0 is an + * invalid value. + * + * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result) + * data, uses nested attributes specified in + * &enum nl80211_peer_measurement_attrs. + * This is also used for capability advertisement in the wiphy information, + * with the appropriate sub-attributes. + * + * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime + * scheduler. + * + * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for + * station associated with the AP. See &enum nl80211_tx_power_setting for + * possible values. + * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This + * allows to set Tx power for a station. If this attribute is not included, + * the default per-interface tx power setting will be overriding. Driver + * should be picking up the lowest tx power, either tx power per-interface + * or per-station. + * + * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It + * is used with %NL80211_CMD_CONNECT to provide password for offloading + * SAE authentication for WPA3-Personal networks. + * + * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. + * + * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection + * functionality. + * + * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) + * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. (u8 attribute) + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * + * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key + * (u16). + * + * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. + * + * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry + * using attributes from &enum nl80211_iftype_akm_attributes. This + * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating + * supported AKM suites capability per interface. AKMs advertised in + * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not + * advertised for a specific interface type. + * + * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a + * nested attribute with &enum nl80211_tid_config_attr sub-attributes; + * on output (in wiphy attributes) it contains only the feature sub- + * attributes. + * + * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control + * port in order to forward/receive them as ordinary data frames. + * + * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, + * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). + * An optional parameter configured through %NL80211_CMD_SET_PMKSA. + * Drivers that trigger roaming need to know the lifetime of the + * configured PMKSA for triggering the full vs. PMKSA caching based + * authentication. This timeout helps authentication methods like SAE, + * where PMK gets updated only by going through a full (new SAE) + * authentication instead of getting updated during an association for EAP + * authentication. No new full authentication within the PMK expiry shall + * result in a disassociation at the end of the lifetime. + * + * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in + * terms of percentage of %NL80211_ATTR_PMK_LIFETIME + * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional + * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the + * driver to trigger a full authentication roam (without PMKSA caching) + * after the reauthentication threshold time, but before the PMK lifetime + * has expired. + * + * Authentication methods like SAE need to be able to generate a new PMKSA + * entry without having to force a disconnection after the PMK timeout. If + * no roaming occurs between the reauth threshold and PMK expiration, + * disassociation is still forced. + * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the + * %NL80211_CMD_REGISTER_FRAME command, see the description there. + * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated + * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with + * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. + * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the + * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. + * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies + * + * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from + * association request when used with NL80211_CMD_NEW_STATION). + * + * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS + * discovery. It is a nested attribute, see + * &enum nl80211_fils_discovery_attributes. + * + * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure + * unsolicited broadcast probe response. It is a nested attribute, see + * &enum nl80211_unsol_bcast_probe_resp_attributes. + * + * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element + * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in + * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE + * derivation in WPA3-Personal networks which are using SAE authentication. + * This is a u8 attribute that encapsulates one of the values from + * &enum nl80211_sae_pwe_mechanism. + * + * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when + * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields + * of %nl80211_sar_attrs which specifies the sar type and related + * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. + * + * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and + * disassoc events to indicate that an immediate reconnect to the AP + * is desired. + * + * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the + * %NL80211_CMD_OBSS_COLOR_COLLISION event. + * + * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's + * until the color switch event. + * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are + * switching to + * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE + * information for the time while performing a color switch. + * + * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID + * advertisements (MBSSID) parameters in AP mode. + * Kernel uses this attribute to indicate the driver's support for MBSSID + * and enhanced multi-BSSID advertisements (EMA AP) to the userspace. + * Userspace should use this attribute to configure per interface MBSSID + * parameters. + * See &enum nl80211_mbssid_config_attributes for details. + * + * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements. + * Mandatory parameter for the transmitting interface to enable MBSSID. + * Optional for the non-transmitting interfaces. + * + * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain + * available for radar/CAC detection on some hw. This chain can't be used + * to transmit or receive frames and it is bounded to a running wdev. + * Background radar/CAC detection allows to avoid the CAC downtime + * switching on a different channel during CAC detection on the selected + * radar channel. + * + * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags, + * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be + * used with %NL80211_CMD_START_AP request. + * + * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if %NL80211_STA_FLAG_WME is set. + * + * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with + * various commands that need a link ID to operate. + * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some + * per-link information and a link ID. + * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as + * authenticate/associate. + * + * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO + * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not + * included in NL80211_CMD_CONNECT drivers must not perform MLO connection. + * + * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of + * AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and + * %NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this + * attribute is not present userspace shall consider maximum number of AKM + * suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum + * number prior to the introduction of this attribute. + * + * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16) + * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16) + * + * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the ack TX timestamp. + * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in + * nanoseconds (u64). This is the device clock timestamp so it will + * probably reset when the device is stopped or the firmware is reset. + * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX + * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates + * the incoming frame RX timestamp. + * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent + * (re)associations. + * @NUM_NL80211_ATTR: total number of nl80211_attrs available + * @NL80211_ATTR_MAX: highest attribute number currently defined + * @__NL80211_ATTR_AFTER_LAST: internal use + */ +enum nl80211_attrs { +/* don't change the order or add anything between, this is ABI! */ + NL80211_ATTR_UNSPEC, + + NL80211_ATTR_WIPHY, + NL80211_ATTR_WIPHY_NAME, + + NL80211_ATTR_IFINDEX, + NL80211_ATTR_IFNAME, + NL80211_ATTR_IFTYPE, + + NL80211_ATTR_MAC, + + NL80211_ATTR_KEY_DATA, + NL80211_ATTR_KEY_IDX, + NL80211_ATTR_KEY_CIPHER, + NL80211_ATTR_KEY_SEQ, + NL80211_ATTR_KEY_DEFAULT, + + NL80211_ATTR_BEACON_INTERVAL, + NL80211_ATTR_DTIM_PERIOD, + NL80211_ATTR_BEACON_HEAD, + NL80211_ATTR_BEACON_TAIL, + + NL80211_ATTR_STA_AID, + NL80211_ATTR_STA_FLAGS, + NL80211_ATTR_STA_LISTEN_INTERVAL, + NL80211_ATTR_STA_SUPPORTED_RATES, + NL80211_ATTR_STA_VLAN, + NL80211_ATTR_STA_INFO, + + NL80211_ATTR_WIPHY_BANDS, + + NL80211_ATTR_MNTR_FLAGS, + + NL80211_ATTR_MESH_ID, + NL80211_ATTR_STA_PLINK_ACTION, + NL80211_ATTR_MPATH_NEXT_HOP, + NL80211_ATTR_MPATH_INFO, + + NL80211_ATTR_BSS_CTS_PROT, + NL80211_ATTR_BSS_SHORT_PREAMBLE, + NL80211_ATTR_BSS_SHORT_SLOT_TIME, + + NL80211_ATTR_HT_CAPABILITY, + + NL80211_ATTR_SUPPORTED_IFTYPES, + + NL80211_ATTR_REG_ALPHA2, + NL80211_ATTR_REG_RULES, + + NL80211_ATTR_MESH_CONFIG, + + NL80211_ATTR_BSS_BASIC_RATES, + + NL80211_ATTR_WIPHY_TXQ_PARAMS, + NL80211_ATTR_WIPHY_FREQ, + NL80211_ATTR_WIPHY_CHANNEL_TYPE, + + NL80211_ATTR_KEY_DEFAULT_MGMT, + + NL80211_ATTR_MGMT_SUBTYPE, + NL80211_ATTR_IE, + + NL80211_ATTR_MAX_NUM_SCAN_SSIDS, + + NL80211_ATTR_SCAN_FREQUENCIES, + NL80211_ATTR_SCAN_SSIDS, + NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ + NL80211_ATTR_BSS, + + NL80211_ATTR_REG_INITIATOR, + NL80211_ATTR_REG_TYPE, + + NL80211_ATTR_SUPPORTED_COMMANDS, + + NL80211_ATTR_FRAME, + NL80211_ATTR_SSID, + NL80211_ATTR_AUTH_TYPE, + NL80211_ATTR_REASON_CODE, + + NL80211_ATTR_KEY_TYPE, + + NL80211_ATTR_MAX_SCAN_IE_LEN, + NL80211_ATTR_CIPHER_SUITES, + + NL80211_ATTR_FREQ_BEFORE, + NL80211_ATTR_FREQ_AFTER, + + NL80211_ATTR_FREQ_FIXED, + + + NL80211_ATTR_WIPHY_RETRY_SHORT, + NL80211_ATTR_WIPHY_RETRY_LONG, + NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + NL80211_ATTR_WIPHY_RTS_THRESHOLD, + + NL80211_ATTR_TIMED_OUT, + + NL80211_ATTR_USE_MFP, + + NL80211_ATTR_STA_FLAGS2, + + NL80211_ATTR_CONTROL_PORT, + + NL80211_ATTR_TESTDATA, + + NL80211_ATTR_PRIVACY, + + NL80211_ATTR_DISCONNECTED_BY_AP, + NL80211_ATTR_STATUS_CODE, + + NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + NL80211_ATTR_CIPHER_SUITE_GROUP, + NL80211_ATTR_WPA_VERSIONS, + NL80211_ATTR_AKM_SUITES, + + NL80211_ATTR_REQ_IE, + NL80211_ATTR_RESP_IE, + + NL80211_ATTR_PREV_BSSID, + + NL80211_ATTR_KEY, + NL80211_ATTR_KEYS, + + NL80211_ATTR_PID, + + NL80211_ATTR_4ADDR, + + NL80211_ATTR_SURVEY_INFO, + + NL80211_ATTR_PMKID, + NL80211_ATTR_MAX_NUM_PMKIDS, + + NL80211_ATTR_DURATION, + + NL80211_ATTR_COOKIE, + + NL80211_ATTR_WIPHY_COVERAGE_CLASS, + + NL80211_ATTR_TX_RATES, + + NL80211_ATTR_FRAME_MATCH, + + NL80211_ATTR_ACK, + + NL80211_ATTR_PS_STATE, + + NL80211_ATTR_CQM, + + NL80211_ATTR_LOCAL_STATE_CHANGE, + + NL80211_ATTR_AP_ISOLATE, + + NL80211_ATTR_WIPHY_TX_POWER_SETTING, + NL80211_ATTR_WIPHY_TX_POWER_LEVEL, + + NL80211_ATTR_TX_FRAME_TYPES, + NL80211_ATTR_RX_FRAME_TYPES, + NL80211_ATTR_FRAME_TYPE, + + NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + + NL80211_ATTR_SUPPORT_IBSS_RSN, + + NL80211_ATTR_WIPHY_ANTENNA_TX, + NL80211_ATTR_WIPHY_ANTENNA_RX, + + NL80211_ATTR_MCAST_RATE, + + NL80211_ATTR_OFFCHANNEL_TX_OK, + + NL80211_ATTR_BSS_HT_OPMODE, + + NL80211_ATTR_KEY_DEFAULT_TYPES, + + NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, + + NL80211_ATTR_MESH_SETUP, + + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, + + NL80211_ATTR_SUPPORT_MESH_AUTH, + NL80211_ATTR_STA_PLINK_STATE, + + NL80211_ATTR_WOWLAN_TRIGGERS, + NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, + + NL80211_ATTR_SCHED_SCAN_INTERVAL, + + NL80211_ATTR_INTERFACE_COMBINATIONS, + NL80211_ATTR_SOFTWARE_IFTYPES, + + NL80211_ATTR_REKEY_DATA, + + NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, + NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, + + NL80211_ATTR_SCAN_SUPP_RATES, + + NL80211_ATTR_HIDDEN_SSID, + + NL80211_ATTR_IE_PROBE_RESP, + NL80211_ATTR_IE_ASSOC_RESP, + + NL80211_ATTR_STA_WME, + NL80211_ATTR_SUPPORT_AP_UAPSD, + + NL80211_ATTR_ROAM_SUPPORT, + + NL80211_ATTR_SCHED_SCAN_MATCH, + NL80211_ATTR_MAX_MATCH_SETS, + + NL80211_ATTR_PMKSA_CANDIDATE, + + NL80211_ATTR_TX_NO_CCK_RATE, + + NL80211_ATTR_TDLS_ACTION, + NL80211_ATTR_TDLS_DIALOG_TOKEN, + NL80211_ATTR_TDLS_OPERATION, + NL80211_ATTR_TDLS_SUPPORT, + NL80211_ATTR_TDLS_EXTERNAL_SETUP, + + NL80211_ATTR_DEVICE_AP_SME, + + NL80211_ATTR_DONT_WAIT_FOR_ACK, + + NL80211_ATTR_FEATURE_FLAGS, + + NL80211_ATTR_PROBE_RESP_OFFLOAD, + + NL80211_ATTR_PROBE_RESP, + + NL80211_ATTR_DFS_REGION, + + NL80211_ATTR_DISABLE_HT, + NL80211_ATTR_HT_CAPABILITY_MASK, + + NL80211_ATTR_NOACK_MAP, + + NL80211_ATTR_INACTIVITY_TIMEOUT, + + NL80211_ATTR_RX_SIGNAL_DBM, + + NL80211_ATTR_BG_SCAN_PERIOD, + + NL80211_ATTR_WDEV, + + NL80211_ATTR_USER_REG_HINT_TYPE, + + NL80211_ATTR_CONN_FAILED_REASON, + + NL80211_ATTR_AUTH_DATA, + + NL80211_ATTR_VHT_CAPABILITY, + + NL80211_ATTR_SCAN_FLAGS, + + NL80211_ATTR_CHANNEL_WIDTH, + NL80211_ATTR_CENTER_FREQ1, + NL80211_ATTR_CENTER_FREQ2, + + NL80211_ATTR_P2P_CTWINDOW, + NL80211_ATTR_P2P_OPPPS, + + NL80211_ATTR_LOCAL_MESH_POWER_MODE, + + NL80211_ATTR_ACL_POLICY, + + NL80211_ATTR_MAC_ADDRS, + + NL80211_ATTR_MAC_ACL_MAX, + + NL80211_ATTR_RADAR_EVENT, + + NL80211_ATTR_EXT_CAPA, + NL80211_ATTR_EXT_CAPA_MASK, + + NL80211_ATTR_STA_CAPABILITY, + NL80211_ATTR_STA_EXT_CAPABILITY, + + NL80211_ATTR_PROTOCOL_FEATURES, + NL80211_ATTR_SPLIT_WIPHY_DUMP, + + NL80211_ATTR_DISABLE_VHT, + NL80211_ATTR_VHT_CAPABILITY_MASK, + + NL80211_ATTR_MDID, + NL80211_ATTR_IE_RIC, + + NL80211_ATTR_CRIT_PROT_ID, + NL80211_ATTR_MAX_CRIT_PROT_DURATION, + + NL80211_ATTR_PEER_AID, + + NL80211_ATTR_COALESCE_RULE, + + NL80211_ATTR_CH_SWITCH_COUNT, + NL80211_ATTR_CH_SWITCH_BLOCK_TX, + NL80211_ATTR_CSA_IES, + NL80211_ATTR_CNTDWN_OFFS_BEACON, + NL80211_ATTR_CNTDWN_OFFS_PRESP, + + NL80211_ATTR_RXMGMT_FLAGS, + + NL80211_ATTR_STA_SUPPORTED_CHANNELS, + + NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, + + NL80211_ATTR_HANDLE_DFS, + + NL80211_ATTR_SUPPORT_5_MHZ, + NL80211_ATTR_SUPPORT_10_MHZ, + + NL80211_ATTR_OPMODE_NOTIF, + + NL80211_ATTR_VENDOR_ID, + NL80211_ATTR_VENDOR_SUBCMD, + NL80211_ATTR_VENDOR_DATA, + NL80211_ATTR_VENDOR_EVENTS, + + NL80211_ATTR_QOS_MAP, + + NL80211_ATTR_MAC_HINT, + NL80211_ATTR_WIPHY_FREQ_HINT, + + NL80211_ATTR_MAX_AP_ASSOC_STA, + + NL80211_ATTR_TDLS_PEER_CAPABILITY, + + NL80211_ATTR_SOCKET_OWNER, + + NL80211_ATTR_CSA_C_OFFSETS_TX, + NL80211_ATTR_MAX_CSA_COUNTERS, + + NL80211_ATTR_TDLS_INITIATOR, + + NL80211_ATTR_USE_RRM, + + NL80211_ATTR_WIPHY_DYN_ACK, + + NL80211_ATTR_TSID, + NL80211_ATTR_USER_PRIO, + NL80211_ATTR_ADMITTED_TIME, + + NL80211_ATTR_SMPS_MODE, + + NL80211_ATTR_OPER_CLASS, + + NL80211_ATTR_MAC_MASK, + + NL80211_ATTR_WIPHY_SELF_MANAGED_REG, + + NL80211_ATTR_EXT_FEATURES, + + NL80211_ATTR_SURVEY_RADIO_STATS, + + NL80211_ATTR_NETNS_FD, + + NL80211_ATTR_SCHED_SCAN_DELAY, + + NL80211_ATTR_REG_INDOOR, + + NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, + NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, + NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, + NL80211_ATTR_SCHED_SCAN_PLANS, + + NL80211_ATTR_PBSS, + + NL80211_ATTR_BSS_SELECT, + + NL80211_ATTR_STA_SUPPORT_P2P_PS, + + NL80211_ATTR_PAD, + + NL80211_ATTR_IFTYPE_EXT_CAPA, + + NL80211_ATTR_MU_MIMO_GROUP_DATA, + NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, + + NL80211_ATTR_SCAN_START_TIME_TSF, + NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, + NL80211_ATTR_MEASUREMENT_DURATION, + NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, + + NL80211_ATTR_MESH_PEER_AID, + + NL80211_ATTR_NAN_MASTER_PREF, + NL80211_ATTR_BANDS, + NL80211_ATTR_NAN_FUNC, + NL80211_ATTR_NAN_MATCH, + + NL80211_ATTR_FILS_KEK, + NL80211_ATTR_FILS_NONCES, + + NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, + + NL80211_ATTR_BSSID, + + NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI, + NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST, + + NL80211_ATTR_TIMEOUT_REASON, + + NL80211_ATTR_FILS_ERP_USERNAME, + NL80211_ATTR_FILS_ERP_REALM, + NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM, + NL80211_ATTR_FILS_ERP_RRK, + NL80211_ATTR_FILS_CACHE_ID, + + NL80211_ATTR_PMK, + + NL80211_ATTR_SCHED_SCAN_MULTI, + NL80211_ATTR_SCHED_SCAN_MAX_REQS, + + NL80211_ATTR_WANT_1X_4WAY_HS, + NL80211_ATTR_PMKR0_NAME, + NL80211_ATTR_PORT_AUTHORIZED, + + NL80211_ATTR_EXTERNAL_AUTH_ACTION, + NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, + + NL80211_ATTR_NSS, + NL80211_ATTR_ACK_SIGNAL, + + NL80211_ATTR_CONTROL_PORT_OVER_NL80211, + + NL80211_ATTR_TXQ_STATS, + NL80211_ATTR_TXQ_LIMIT, + NL80211_ATTR_TXQ_MEMORY_LIMIT, + NL80211_ATTR_TXQ_QUANTUM, + + NL80211_ATTR_HE_CAPABILITY, + + NL80211_ATTR_FTM_RESPONDER, + + NL80211_ATTR_FTM_RESPONDER_STATS, + + NL80211_ATTR_TIMEOUT, + + NL80211_ATTR_PEER_MEASUREMENTS, + + NL80211_ATTR_AIRTIME_WEIGHT, + NL80211_ATTR_STA_TX_POWER_SETTING, + NL80211_ATTR_STA_TX_POWER, + + NL80211_ATTR_SAE_PASSWORD, + + NL80211_ATTR_TWT_RESPONDER, + + NL80211_ATTR_HE_OBSS_PD, + + NL80211_ATTR_WIPHY_EDMG_CHANNELS, + NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, + + NL80211_ATTR_VLAN_ID, + + NL80211_ATTR_HE_BSS_COLOR, + + NL80211_ATTR_IFTYPE_AKM_SUITES, + + NL80211_ATTR_TID_CONFIG, + + NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, + + NL80211_ATTR_PMK_LIFETIME, + NL80211_ATTR_PMK_REAUTH_THRESHOLD, + + NL80211_ATTR_RECEIVE_MULTICAST, + NL80211_ATTR_WIPHY_FREQ_OFFSET, + NL80211_ATTR_CENTER_FREQ1_OFFSET, + NL80211_ATTR_SCAN_FREQ_KHZ, + + NL80211_ATTR_HE_6GHZ_CAPABILITY, + + NL80211_ATTR_FILS_DISCOVERY, + + NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, + + NL80211_ATTR_S1G_CAPABILITY, + NL80211_ATTR_S1G_CAPABILITY_MASK, + + NL80211_ATTR_SAE_PWE, + + NL80211_ATTR_RECONNECT_REQUESTED, + + NL80211_ATTR_SAR_SPEC, + + NL80211_ATTR_DISABLE_HE, + + NL80211_ATTR_OBSS_COLOR_BITMAP, + + NL80211_ATTR_COLOR_CHANGE_COUNT, + NL80211_ATTR_COLOR_CHANGE_COLOR, + NL80211_ATTR_COLOR_CHANGE_ELEMS, + + NL80211_ATTR_MBSSID_CONFIG, + NL80211_ATTR_MBSSID_ELEMS, + + NL80211_ATTR_RADAR_BACKGROUND, + + NL80211_ATTR_AP_SETTINGS_FLAGS, + + NL80211_ATTR_EHT_CAPABILITY, + + NL80211_ATTR_DISABLE_EHT, + + NL80211_ATTR_MLO_LINKS, + NL80211_ATTR_MLO_LINK_ID, + NL80211_ATTR_MLD_ADDR, + + NL80211_ATTR_MLO_SUPPORT, + + NL80211_ATTR_MAX_NUM_AKM_SUITES, + + NL80211_ATTR_EML_CAPABILITY, + NL80211_ATTR_MLD_CAPA_AND_OPS, + + NL80211_ATTR_TX_HW_TIMESTAMP, + NL80211_ATTR_RX_HW_TIMESTAMP, + NL80211_ATTR_TD_BITMAP, + + /* add attributes here, update the policy in nl80211.c */ + + __NL80211_ATTR_AFTER_LAST, + NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, + NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 +}; + +/* source-level API compatibility */ +#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION +#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG +#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER +#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA +#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON +#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP + +/* + * Allow user space programs to use #ifdef on new attributes by defining them + * here + */ +#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT +#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY +#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES +#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS +#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ +#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE +#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE +#define NL80211_ATTR_IE NL80211_ATTR_IE +#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR +#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE +#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME +#define NL80211_ATTR_SSID NL80211_ATTR_SSID +#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE +#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE +#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE +#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP +#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS +#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES +#define NL80211_ATTR_KEY NL80211_ATTR_KEY +#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + +#define NL80211_WIPHY_NAME_MAXLEN 64 + +#define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_HT_RATES 77 +#define NL80211_MAX_SUPP_REG_RULES 128 +#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 +#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 +#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +#define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_VHT_CAPABILITY_LEN 12 +#define NL80211_HE_MIN_CAPABILITY_LEN 16 +#define NL80211_HE_MAX_CAPABILITY_LEN 54 +#define NL80211_MAX_NR_CIPHER_SUITES 5 + +/* + * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES + * present in %NL80211_CMD_GET_WIPHY response. + */ +#define NL80211_MAX_NR_AKM_SUITES 2 +#define NL80211_EHT_MIN_CAPABILITY_LEN 13 +#define NL80211_EHT_MAX_CAPABILITY_LEN 51 + +#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 + +/* default RSSI threshold for scan results if none specified. */ +#define NL80211_SCAN_RSSI_THOLD_OFF -300 + +#define NL80211_CQM_TXE_MAX_INTVL 1800 + +/** + * enum nl80211_iftype - (virtual) interface types + * + * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides + * @NL80211_IFTYPE_ADHOC: independent BSS member + * @NL80211_IFTYPE_STATION: managed BSS member + * @NL80211_IFTYPE_AP: access point + * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces + * are a bit special in that they must always be tied to a pre-existing + * AP type interface. + * @NL80211_IFTYPE_WDS: wireless distribution interface + * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames + * @NL80211_IFTYPE_MESH_POINT: mesh point + * @NL80211_IFTYPE_P2P_CLIENT: P2P client + * @NL80211_IFTYPE_P2P_GO: P2P group owner + * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev + * and therefore can't be created in the normal ways, use the + * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE + * commands to create and destroy one + * @NL80211_IFTYPE_OCB: Outside Context of a BSS + * This mode corresponds to the MIB variable dot11OCBActivated=true + * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) + * @NL80211_IFTYPE_MAX: highest interface type number currently defined + * @NUM_NL80211_IFTYPES: number of defined interface types + * + * These values are used with the %NL80211_ATTR_IFTYPE + * to set the type of an interface. + * + */ +enum nl80211_iftype { + NL80211_IFTYPE_UNSPECIFIED, + NL80211_IFTYPE_ADHOC, + NL80211_IFTYPE_STATION, + NL80211_IFTYPE_AP, + NL80211_IFTYPE_AP_VLAN, + NL80211_IFTYPE_WDS, + NL80211_IFTYPE_MONITOR, + NL80211_IFTYPE_MESH_POINT, + NL80211_IFTYPE_P2P_CLIENT, + NL80211_IFTYPE_P2P_GO, + NL80211_IFTYPE_P2P_DEVICE, + NL80211_IFTYPE_OCB, + NL80211_IFTYPE_NAN, + + /* keep last */ + NUM_NL80211_IFTYPES, + NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 +}; + +/** + * enum nl80211_sta_flags - station flags + * + * Station flags. When a station is added to an AP interface, it is + * assumed to be already associated (and hence authenticated.) + * + * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved + * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) + * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames + * with short barker preamble + * @NL80211_STA_FLAG_WME: station is WME/QoS capable + * @NL80211_STA_FLAG_MFP: station uses management frame protection + * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated + * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should + * only be used in managed mode (even in the flags mask). Note that the + * flag can't be changed, it is only valid while adding a station, and + * attempts to change it will silently be ignored (rather than rejected + * as errors.) + * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers + * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a + * previously added station into associated state + * @NL80211_STA_FLAG_MAX: highest station flag number currently defined + * @__NL80211_STA_FLAG_AFTER_LAST: internal use + */ +enum nl80211_sta_flags { + __NL80211_STA_FLAG_INVALID, + NL80211_STA_FLAG_AUTHORIZED, + NL80211_STA_FLAG_SHORT_PREAMBLE, + NL80211_STA_FLAG_WME, + NL80211_STA_FLAG_MFP, + NL80211_STA_FLAG_AUTHENTICATED, + NL80211_STA_FLAG_TDLS_PEER, + NL80211_STA_FLAG_ASSOCIATED, + + /* keep last */ + __NL80211_STA_FLAG_AFTER_LAST, + NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_p2p_ps_status - station support of P2P PS + * + * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism + * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism + * @NUM_NL80211_P2P_PS_STATUS: number of values + */ +enum nl80211_sta_p2p_ps_status { + NL80211_P2P_PS_UNSUPPORTED = 0, + NL80211_P2P_PS_SUPPORTED, + + NUM_NL80211_P2P_PS_STATUS, +}; + +#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER + +/** + * struct nl80211_sta_flag_update - station flags mask/set + * @mask: mask of station flags to set + * @set: which values to set them to + * + * Both mask and set contain bits as per &enum nl80211_sta_flags. + */ +struct nl80211_sta_flag_update { + __u32 mask; + __u32 set; +} __attribute__((packed)); + +/** + * enum nl80211_he_gi - HE guard interval + * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec + * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec + * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec + */ +enum nl80211_he_gi { + NL80211_RATE_INFO_HE_GI_0_8, + NL80211_RATE_INFO_HE_GI_1_6, + NL80211_RATE_INFO_HE_GI_3_2, +}; + +/** + * enum nl80211_he_ltf - HE long training field + * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec + * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec + * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec + */ +enum nl80211_he_ltf { + NL80211_RATE_INFO_HE_1XLTF, + NL80211_RATE_INFO_HE_2XLTF, + NL80211_RATE_INFO_HE_4XLTF, +}; + +/** + * enum nl80211_he_ru_alloc - HE RU allocation values + * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation + */ +enum nl80211_he_ru_alloc { + NL80211_RATE_INFO_HE_RU_ALLOC_26, + NL80211_RATE_INFO_HE_RU_ALLOC_52, + NL80211_RATE_INFO_HE_RU_ALLOC_106, + NL80211_RATE_INFO_HE_RU_ALLOC_242, + NL80211_RATE_INFO_HE_RU_ALLOC_484, + NL80211_RATE_INFO_HE_RU_ALLOC_996, + NL80211_RATE_INFO_HE_RU_ALLOC_2x996, +}; + +/** + * enum nl80211_eht_gi - EHT guard interval + * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec + * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec + * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec + */ +enum nl80211_eht_gi { + NL80211_RATE_INFO_EHT_GI_0_8, + NL80211_RATE_INFO_EHT_GI_1_6, + NL80211_RATE_INFO_EHT_GI_3_2, +}; + +/** + * enum nl80211_eht_ru_alloc - EHT RU allocation values + * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation + * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation + */ +enum nl80211_eht_ru_alloc { + NL80211_RATE_INFO_EHT_RU_ALLOC_26, + NL80211_RATE_INFO_EHT_RU_ALLOC_52, + NL80211_RATE_INFO_EHT_RU_ALLOC_52P26, + NL80211_RATE_INFO_EHT_RU_ALLOC_106, + NL80211_RATE_INFO_EHT_RU_ALLOC_106P26, + NL80211_RATE_INFO_EHT_RU_ALLOC_242, + NL80211_RATE_INFO_EHT_RU_ALLOC_484, + NL80211_RATE_INFO_EHT_RU_ALLOC_484P242, + NL80211_RATE_INFO_EHT_RU_ALLOC_996, + NL80211_RATE_INFO_EHT_RU_ALLOC_996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242, + NL80211_RATE_INFO_EHT_RU_ALLOC_2x996, + NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_3x996, + NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484, + NL80211_RATE_INFO_EHT_RU_ALLOC_4x996, +}; + +/** + * enum nl80211_rate_info - bitrate information + * + * These attribute types are used with %NL80211_STA_INFO_TXRATE + * when getting information about the bitrate of a station. + * There are 2 attributes for bitrate, a legacy one that represents + * a 16-bit value, and new one that represents a 32-bit value. + * If the rate value fits into 16 bit, both attributes are reported + * with the same value. If the rate is too high to fit into 16 bits + * (>6.5535Gbps) only 32-bit attribute is included. + * User space tools encouraged to use the 32-bit attribute and fall + * back to the 16-bit one for compatibility with older kernels. + * + * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved + * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) + * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) + * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate + * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval + * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) + * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined + * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) + * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) + * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate + * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the + * same as 160 for purposes of the bitrates + * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate + * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * half the base (20 MHz) rate + * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * a quarter of the base (20 MHz) rate + * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) + * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) + * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier + * (u8, see &enum nl80211_he_gi) + * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) + * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then + * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) + * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate + * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15) + * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8) + * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier + * (u8, see &enum nl80211_eht_gi) + * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then + * non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc) + * @__NL80211_RATE_INFO_AFTER_LAST: internal use + */ +enum nl80211_rate_info { + __NL80211_RATE_INFO_INVALID, + NL80211_RATE_INFO_BITRATE, + NL80211_RATE_INFO_MCS, + NL80211_RATE_INFO_40_MHZ_WIDTH, + NL80211_RATE_INFO_SHORT_GI, + NL80211_RATE_INFO_BITRATE32, + NL80211_RATE_INFO_VHT_MCS, + NL80211_RATE_INFO_VHT_NSS, + NL80211_RATE_INFO_80_MHZ_WIDTH, + NL80211_RATE_INFO_80P80_MHZ_WIDTH, + NL80211_RATE_INFO_160_MHZ_WIDTH, + NL80211_RATE_INFO_10_MHZ_WIDTH, + NL80211_RATE_INFO_5_MHZ_WIDTH, + NL80211_RATE_INFO_HE_MCS, + NL80211_RATE_INFO_HE_NSS, + NL80211_RATE_INFO_HE_GI, + NL80211_RATE_INFO_HE_DCM, + NL80211_RATE_INFO_HE_RU_ALLOC, + NL80211_RATE_INFO_320_MHZ_WIDTH, + NL80211_RATE_INFO_EHT_MCS, + NL80211_RATE_INFO_EHT_NSS, + NL80211_RATE_INFO_EHT_GI, + NL80211_RATE_INFO_EHT_RU_ALLOC, + + /* keep last */ + __NL80211_RATE_INFO_AFTER_LAST, + NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_bss_param - BSS information collected by STA + * + * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM + * when getting information about the bitrate of a station. + * + * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved + * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) + * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) + * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) + * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined + * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use + */ +enum nl80211_sta_bss_param { + __NL80211_STA_BSS_PARAM_INVALID, + NL80211_STA_BSS_PARAM_CTS_PROT, + NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, + NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, + NL80211_STA_BSS_PARAM_DTIM_PERIOD, + NL80211_STA_BSS_PARAM_BEACON_INTERVAL, + + /* keep last */ + __NL80211_STA_BSS_PARAM_AFTER_LAST, + NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_info - station information + * + * These attribute types are used with %NL80211_ATTR_STA_INFO + * when getting information about a station. + * + * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved + * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) + * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) + * (u32, from this station) + * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) + * (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) + * (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) + * (u64, to this station) + * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) + * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute + * containing info as possible, see &enum nl80211_rate_info + * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) + * (u32, from this station) + * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) + * (u32, to this station) + * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) + * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) + * (u32, to this station) + * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) + * @NL80211_STA_INFO_LLID: the station's mesh LLID + * @NL80211_STA_INFO_PLID: the station's mesh PLID + * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station + * (see %enum nl80211_plink_state) + * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested + * attribute, like NL80211_STA_INFO_TX_BITRATE. + * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute + * containing info as possible, see &enum nl80211_sta_bss_param + * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected + * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. + * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) + * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU + * Contains a nested array of signal strength attributes (u8, dBm) + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average + * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. + * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the + * 802.11 header (u32, kbps) + * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons + * (u64) + * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) + * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average + * for beacons only (u8, dBm) + * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) + * This is a nested attribute where each the inner attribute number is the + * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; + * each one of those is again nested with &enum nl80211_tid_stats + * attributes carrying the actual values. + * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames + * received from the station (u64, usec) + * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) + * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm) + * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs) + * (u32, from this station) + * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received + * with an FCS error (u32, from this station). This count may not include + * some packets with an FCS error due to TA corruption. Hence this counter + * might not be fully accurate. + * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a + * mesh gate (u8, 0 or 1) + * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames + * sent to the station (u64, usec) + * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) + * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station + * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) + * of STA's association + * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a + * authentication server (u8, 0 or 1) + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +enum nl80211_sta_info { + __NL80211_STA_INFO_INVALID, + NL80211_STA_INFO_INACTIVE_TIME, + NL80211_STA_INFO_RX_BYTES, + NL80211_STA_INFO_TX_BYTES, + NL80211_STA_INFO_LLID, + NL80211_STA_INFO_PLID, + NL80211_STA_INFO_PLINK_STATE, + NL80211_STA_INFO_SIGNAL, + NL80211_STA_INFO_TX_BITRATE, + NL80211_STA_INFO_RX_PACKETS, + NL80211_STA_INFO_TX_PACKETS, + NL80211_STA_INFO_TX_RETRIES, + NL80211_STA_INFO_TX_FAILED, + NL80211_STA_INFO_SIGNAL_AVG, + NL80211_STA_INFO_RX_BITRATE, + NL80211_STA_INFO_BSS_PARAM, + NL80211_STA_INFO_CONNECTED_TIME, + NL80211_STA_INFO_STA_FLAGS, + NL80211_STA_INFO_BEACON_LOSS, + NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_LOCAL_PM, + NL80211_STA_INFO_PEER_PM, + NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, + NL80211_STA_INFO_CHAIN_SIGNAL, + NL80211_STA_INFO_CHAIN_SIGNAL_AVG, + NL80211_STA_INFO_EXPECTED_THROUGHPUT, + NL80211_STA_INFO_RX_DROP_MISC, + NL80211_STA_INFO_BEACON_RX, + NL80211_STA_INFO_BEACON_SIGNAL_AVG, + NL80211_STA_INFO_TID_STATS, + NL80211_STA_INFO_RX_DURATION, + NL80211_STA_INFO_PAD, + NL80211_STA_INFO_ACK_SIGNAL, + NL80211_STA_INFO_ACK_SIGNAL_AVG, + NL80211_STA_INFO_RX_MPDUS, + NL80211_STA_INFO_FCS_ERROR_COUNT, + NL80211_STA_INFO_CONNECTED_TO_GATE, + NL80211_STA_INFO_TX_DURATION, + NL80211_STA_INFO_AIRTIME_WEIGHT, + NL80211_STA_INFO_AIRTIME_LINK_METRIC, + NL80211_STA_INFO_ASSOC_AT_BOOTTIME, + NL80211_STA_INFO_CONNECTED_TO_AS, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, + NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 +}; + +/* we renamed this - stay compatible */ +#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG + + +/** + * enum nl80211_tid_stats - per TID statistics attributes + * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved + * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) + * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or + * attempted to transmit; u64) + * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for + * transmitted MSDUs (not counting the first attempt; u64) + * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted + * MSDUs (u64) + * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) + * @NUM_NL80211_TID_STATS: number of attributes here + * @NL80211_TID_STATS_MAX: highest numbered attribute here + */ +enum nl80211_tid_stats { + __NL80211_TID_STATS_INVALID, + NL80211_TID_STATS_RX_MSDU, + NL80211_TID_STATS_TX_MSDU, + NL80211_TID_STATS_TX_MSDU_RETRIES, + NL80211_TID_STATS_TX_MSDU_FAILED, + NL80211_TID_STATS_PAD, + NL80211_TID_STATS_TXQ_STATS, + + /* keep last */ + NUM_NL80211_TID_STATS, + NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 +}; + +/** + * enum nl80211_txq_stats - per TXQ statistics attributes + * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved + * @NUM_NL80211_TXQ_STATS: number of attributes here + * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged + * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently + * backlogged + * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen + * @NL80211_TXQ_STATS_DROPS: total number of packet drops + * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks + * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow + * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow + * (only for per-phy stats) + * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions + * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ + * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ + * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY + * @NL80211_TXQ_STATS_MAX: highest numbered attribute here + */ +enum nl80211_txq_stats { + __NL80211_TXQ_STATS_INVALID, + NL80211_TXQ_STATS_BACKLOG_BYTES, + NL80211_TXQ_STATS_BACKLOG_PACKETS, + NL80211_TXQ_STATS_FLOWS, + NL80211_TXQ_STATS_DROPS, + NL80211_TXQ_STATS_ECN_MARKS, + NL80211_TXQ_STATS_OVERLIMIT, + NL80211_TXQ_STATS_OVERMEMORY, + NL80211_TXQ_STATS_COLLISIONS, + NL80211_TXQ_STATS_TX_BYTES, + NL80211_TXQ_STATS_TX_PACKETS, + NL80211_TXQ_STATS_MAX_FLOWS, + + /* keep last */ + NUM_NL80211_TXQ_STATS, + NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 +}; + +/** + * enum nl80211_mpath_flags - nl80211 mesh path flags + * + * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active + * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running + * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN + * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set + * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded + */ +enum nl80211_mpath_flags { + NL80211_MPATH_FLAG_ACTIVE = 1<<0, + NL80211_MPATH_FLAG_RESOLVING = 1<<1, + NL80211_MPATH_FLAG_SN_VALID = 1<<2, + NL80211_MPATH_FLAG_FIXED = 1<<3, + NL80211_MPATH_FLAG_RESOLVED = 1<<4, +}; + +/** + * enum nl80211_mpath_info - mesh path information + * + * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting + * information about a mesh path. + * + * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved + * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination + * @NL80211_MPATH_INFO_SN: destination sequence number + * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path + * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now + * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in + * &enum nl80211_mpath_flags; + * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec + * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries + * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination + * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination + * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number + * currently defined + * @__NL80211_MPATH_INFO_AFTER_LAST: internal use + */ +enum nl80211_mpath_info { + __NL80211_MPATH_INFO_INVALID, + NL80211_MPATH_INFO_FRAME_QLEN, + NL80211_MPATH_INFO_SN, + NL80211_MPATH_INFO_METRIC, + NL80211_MPATH_INFO_EXPTIME, + NL80211_MPATH_INFO_FLAGS, + NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, + NL80211_MPATH_INFO_DISCOVERY_RETRIES, + NL80211_MPATH_INFO_HOP_COUNT, + NL80211_MPATH_INFO_PATH_CHANGE, + + /* keep last */ + __NL80211_MPATH_INFO_AFTER_LAST, + NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band_iftype_attr - Interface type data attributes + * + * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute + * for each interface type that supports the band data + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as + * defined in HE capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), + * given for all 6 GHz band channels + * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are + * advertised on this band/for this iftype (binary) + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as + * defined in EHT capabilities element + * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined + */ +enum nl80211_band_iftype_attr { + __NL80211_BAND_IFTYPE_ATTR_INVALID, + + NL80211_BAND_IFTYPE_ATTR_IFTYPES, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, + NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, + NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, + + /* keep last */ + __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, + NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band_attr - band attributes + * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, + * an array of nested frequency attributes + * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, + * an array of nested bitrate attributes + * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as + * defined in 802.11n + * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n + * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as + * defined in 802.11ac + * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using + * attributes from &enum nl80211_band_iftype_attr + * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. + * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined + * @__NL80211_BAND_ATTR_AFTER_LAST: internal use + */ +enum nl80211_band_attr { + __NL80211_BAND_ATTR_INVALID, + NL80211_BAND_ATTR_FREQS, + NL80211_BAND_ATTR_RATES, + + NL80211_BAND_ATTR_HT_MCS_SET, + NL80211_BAND_ATTR_HT_CAPA, + NL80211_BAND_ATTR_HT_AMPDU_FACTOR, + NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + + NL80211_BAND_ATTR_VHT_MCS_SET, + NL80211_BAND_ATTR_VHT_CAPA, + NL80211_BAND_ATTR_IFTYPE_DATA, + + NL80211_BAND_ATTR_EDMG_CHANNELS, + NL80211_BAND_ATTR_EDMG_BW_CONFIG, + + /* keep last */ + __NL80211_BAND_ATTR_AFTER_LAST, + NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA + +/** + * enum nl80211_wmm_rule - regulatory wmm rule + * + * @__NL80211_WMMR_INVALID: attribute number 0 is reserved + * @NL80211_WMMR_CW_MIN: Minimum contention window slot. + * @NL80211_WMMR_CW_MAX: Maximum contention window slot. + * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. + * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. + * @nl80211_WMMR_MAX: highest possible wmm rule. + * @__NL80211_WMMR_LAST: Internal use. + */ +enum nl80211_wmm_rule { + __NL80211_WMMR_INVALID, + NL80211_WMMR_CW_MIN, + NL80211_WMMR_CW_MAX, + NL80211_WMMR_AIFSN, + NL80211_WMMR_TXOP, + + /* keep last */ + __NL80211_WMMR_LAST, + NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 +}; + +/** + * enum nl80211_frequency_attr - frequency attributes + * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz + * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current + * regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation + * are permitted on this channel, this includes sending probe + * requests, or modes of operation that require beaconing. + * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm + * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS + * (enum nl80211_dfs_state) + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * this channel is in this DFS state. + * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible, + * this includes 80+80 channels + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible + * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this + * channel. A channel that has the INDOOR_ONLY attribute can only be + * used when there is a clear assessment that the device is operating in + * an indoor surroundings, i.e., it is connected to AC power (and not + * through portable DC inverters) or is under the control of a master + * that is acting as an AP and is connected to AC power. + * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this + * channel if it's connected concurrently to a BSS on the same channel on + * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS + * off-channel on a channel that has the IR_CONCURRENT attribute set can be + * done when there is a clear assessment that the device is operating under + * the guidance of an authorized master, i.e., setting up a GO or TDLS + * off-channel while the device is also connected to an AP with DFS and + * radar detection on the UNII band (it is up to user-space, i.e., + * wpa_supplicant to perform the required verifications). Using this + * attribute for IR is disallowed for master interfaces (IBSS, AP). + * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. + * This is a nested attribute that contains the wmm limitation per AC. + * (see &enum nl80211_wmm_rule) + * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel + * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz + * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible + * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel + * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number + * currently defined + * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use + * + * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 + * for more information on the FCC description of the relaxations allowed + * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and + * NL80211_FREQUENCY_ATTR_IR_CONCURRENT. + */ +enum nl80211_frequency_attr { + __NL80211_FREQUENCY_ATTR_INVALID, + NL80211_FREQUENCY_ATTR_FREQ, + NL80211_FREQUENCY_ATTR_DISABLED, + NL80211_FREQUENCY_ATTR_NO_IR, + __NL80211_FREQUENCY_ATTR_NO_IBSS, + NL80211_FREQUENCY_ATTR_RADAR, + NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + NL80211_FREQUENCY_ATTR_DFS_STATE, + NL80211_FREQUENCY_ATTR_DFS_TIME, + NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, + NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + NL80211_FREQUENCY_ATTR_INDOOR_ONLY, + NL80211_FREQUENCY_ATTR_IR_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, + NL80211_FREQUENCY_ATTR_NO_10MHZ, + NL80211_FREQUENCY_ATTR_WMM, + NL80211_FREQUENCY_ATTR_NO_HE, + NL80211_FREQUENCY_ATTR_OFFSET, + NL80211_FREQUENCY_ATTR_1MHZ, + NL80211_FREQUENCY_ATTR_2MHZ, + NL80211_FREQUENCY_ATTR_4MHZ, + NL80211_FREQUENCY_ATTR_8MHZ, + NL80211_FREQUENCY_ATTR_16MHZ, + NL80211_FREQUENCY_ATTR_NO_320MHZ, + NL80211_FREQUENCY_ATTR_NO_EHT, + + /* keep last */ + __NL80211_FREQUENCY_ATTR_AFTER_LAST, + NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER +#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ + NL80211_FREQUENCY_ATTR_IR_CONCURRENT + +/** + * enum nl80211_bitrate_attr - bitrate attributes + * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps + * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported + * in 2.4 GHz band. + * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number + * currently defined + * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_bitrate_attr { + __NL80211_BITRATE_ATTR_INVALID, + NL80211_BITRATE_ATTR_RATE, + NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, + + /* keep last */ + __NL80211_BITRATE_ATTR_AFTER_LAST, + NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_initiator - Indicates the initiator of a reg domain request + * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world + * regulatory domain. + * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the + * regulatory domain. + * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the + * wireless core it thinks its knows the regulatory domain we should be in. + * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an + * 802.11 country information element with regulatory information it + * thinks we should consider. cfg80211 only processes the country + * code from the IE, and relies on the regulatory domain information + * structure passed by userspace (CRDA) from our wireless-regdb. + * If a channel is enabled but the country code indicates it should + * be disabled we disable the channel and re-enable it upon disassociation. + */ +enum nl80211_reg_initiator { + NL80211_REGDOM_SET_BY_CORE, + NL80211_REGDOM_SET_BY_USER, + NL80211_REGDOM_SET_BY_DRIVER, + NL80211_REGDOM_SET_BY_COUNTRY_IE, +}; + +/** + * enum nl80211_reg_type - specifies the type of regulatory domain + * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains + * to a specific country. When this is set you can count on the + * ISO / IEC 3166 alpha2 country code being valid. + * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory + * domain. + * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom + * driver specific world regulatory domain. These do not apply system-wide + * and are only applicable to the individual devices which have requested + * them to be applied. + * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product + * of an intersection between two regulatory domains -- the previously + * set regulatory domain on the system and the last accepted regulatory + * domain request to be processed. + */ +enum nl80211_reg_type { + NL80211_REGDOM_TYPE_COUNTRY, + NL80211_REGDOM_TYPE_WORLD, + NL80211_REGDOM_TYPE_CUSTOM_WORLD, + NL80211_REGDOM_TYPE_INTERSECTION, +}; + +/** + * enum nl80211_reg_rule_attr - regulatory rule attributes + * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. + * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this + * frequency range, in KHz. + * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. + * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for + * a given frequency range. The value is in mBm (100 * dBm). + * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * If not present or 0 default CAC time will be used. + * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number + * currently defined + * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_reg_rule_attr { + __NL80211_REG_RULE_ATTR_INVALID, + NL80211_ATTR_REG_RULE_FLAGS, + + NL80211_ATTR_FREQ_RANGE_START, + NL80211_ATTR_FREQ_RANGE_END, + NL80211_ATTR_FREQ_RANGE_MAX_BW, + + NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, + NL80211_ATTR_POWER_RULE_MAX_EIRP, + + NL80211_ATTR_DFS_CAC_TIME, + + /* keep last */ + __NL80211_REG_RULE_ATTR_AFTER_LAST, + NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sched_scan_match_attr - scheduled scan match attributes + * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, + * only report BSS with matching SSID. + * (This cannot be used together with BSSID.) + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a + * BSS in scan results. Filtering is turned off if not specified. Note that + * if this attribute is in a match set of its own, then it is treated as + * the default value for all matchsets with an SSID, rather than being a + * matchset of its own without an RSSI filter. This is due to problems with + * how this API was implemented in the past. Also, due to the same problem, + * the only way to create a matchset with only an RSSI filter (with this + * attribute) is if there's only a single matchset with the RSSI attribute. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether + * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or + * relative to current bss's RSSI. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for + * BSS-es in the specified band is to be adjusted before doing + * RSSI-based BSS selection. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching + * (this cannot be used together with SSID). + * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the + * band specific minimum rssi thresholds for the bands defined in + * enum nl80211_band. The minimum rssi threshold value(s32) specific to a + * band shall be encapsulated in attribute with type value equals to one + * of the NL80211_BAND_* defined in enum nl80211_band. For example, the + * minimum rssi threshold value for 2.4GHZ band shall be encapsulated + * within an attribute of type NL80211_BAND_2GHZ. And one or more of such + * attributes will be nested within this attribute. + * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter + * attribute number currently defined + * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_match_attr { + __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, + + NL80211_SCHED_SCAN_MATCH_ATTR_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, + NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, + NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, + NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, + + /* keep last */ + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, + NL80211_SCHED_SCAN_MATCH_ATTR_MAX = + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 +}; + +/* only for backward compatibility */ +#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID + +/** + * enum nl80211_reg_rule_flags - regulatory rule flags + * + * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed + * @NL80211_RRF_NO_CCK: CCK modulation not allowed + * @NL80211_RRF_NO_INDOOR: indoor operation not allowed + * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed + * @NL80211_RRF_DFS: DFS support is required to be used + * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links + * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links + * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, + * this includes probe requests or modes of operation that require + * beaconing. + * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated + * base on contiguous rules and wider channels will be allowed to cross + * multiple contiguous/overlapping frequency ranges. + * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT + * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation + * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation + * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed + * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed + * @NL80211_RRF_NO_HE: HE operation not allowed + * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed + */ +enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, + NL80211_RRF_NO_CCK = 1<<1, + NL80211_RRF_NO_INDOOR = 1<<2, + NL80211_RRF_NO_OUTDOOR = 1<<3, + NL80211_RRF_DFS = 1<<4, + NL80211_RRF_PTP_ONLY = 1<<5, + NL80211_RRF_PTMP_ONLY = 1<<6, + NL80211_RRF_NO_IR = 1<<7, + __NL80211_RRF_NO_IBSS = 1<<8, + NL80211_RRF_AUTO_BW = 1<<11, + NL80211_RRF_IR_CONCURRENT = 1<<12, + NL80211_RRF_NO_HT40MINUS = 1<<13, + NL80211_RRF_NO_HT40PLUS = 1<<14, + NL80211_RRF_NO_80MHZ = 1<<15, + NL80211_RRF_NO_160MHZ = 1<<16, + NL80211_RRF_NO_HE = 1<<17, + NL80211_RRF_NO_320MHZ = 1<<18, +}; + +#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR +#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR +#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR +#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ + NL80211_RRF_NO_HT40PLUS) +#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT + +/* For backport compatibility with older userspace */ +#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) + +/** + * enum nl80211_dfs_regions - regulatory DFS regions + * + * @NL80211_DFS_UNSET: Country has no DFS master region specified + * @NL80211_DFS_FCC: Country follows DFS master rules from FCC + * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI + * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec + */ +enum nl80211_dfs_regions { + NL80211_DFS_UNSET = 0, + NL80211_DFS_FCC = 1, + NL80211_DFS_ETSI = 2, + NL80211_DFS_JP = 3, +}; + +/** + * enum nl80211_user_reg_hint_type - type of user regulatory hint + * + * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always + * assumed if the attribute is not set. + * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular + * base station. Device drivers that have been tested to work + * properly to support this type of hint can enable these hints + * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature + * capability on the struct wiphy. The wireless core will + * ignore all cell base station hints until at least one device + * present has been registered with the wireless core that + * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a + * supported feature. + * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the + * platform is operating in an indoor environment. + */ +enum nl80211_user_reg_hint_type { + NL80211_USER_REG_HINT_USER = 0, + NL80211_USER_REG_HINT_CELL_BASE = 1, + NL80211_USER_REG_HINT_INDOOR = 2, +}; + +/** + * enum nl80211_survey_info - survey information + * + * These attribute types are used with %NL80211_ATTR_SURVEY_INFO + * when getting information about a survey. + * + * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved + * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel + * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used + * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio + * was turned on (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary + * channel was sensed busy (either due to activity or energy detect) + * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension + * channel was sensed busy + * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent + * receiving data (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent + * transmitting data (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan + * (on this channel or globally) + * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent + * receiving frames destined to the local BSS + * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number + * currently defined + * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz + * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use + */ +enum nl80211_survey_info { + __NL80211_SURVEY_INFO_INVALID, + NL80211_SURVEY_INFO_FREQUENCY, + NL80211_SURVEY_INFO_NOISE, + NL80211_SURVEY_INFO_IN_USE, + NL80211_SURVEY_INFO_TIME, + NL80211_SURVEY_INFO_TIME_BUSY, + NL80211_SURVEY_INFO_TIME_EXT_BUSY, + NL80211_SURVEY_INFO_TIME_RX, + NL80211_SURVEY_INFO_TIME_TX, + NL80211_SURVEY_INFO_TIME_SCAN, + NL80211_SURVEY_INFO_PAD, + NL80211_SURVEY_INFO_TIME_BSS_RX, + NL80211_SURVEY_INFO_FREQUENCY_OFFSET, + + /* keep last */ + __NL80211_SURVEY_INFO_AFTER_LAST, + NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 +}; + +/* keep old names for compatibility */ +#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME +#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY +#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY +#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX +#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX + +/** + * enum nl80211_mntr_flags - monitor configuration flags + * + * Monitor configuration flags. + * + * @__NL80211_MNTR_FLAG_INVALID: reserved + * + * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS + * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP + * @NL80211_MNTR_FLAG_CONTROL: pass control frames + * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering + * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. + * overrides all other flags. + * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address + * and ACK incoming unicast packets. + * + * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use + * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag + */ +enum nl80211_mntr_flags { + __NL80211_MNTR_FLAG_INVALID, + NL80211_MNTR_FLAG_FCSFAIL, + NL80211_MNTR_FLAG_PLCPFAIL, + NL80211_MNTR_FLAG_CONTROL, + NL80211_MNTR_FLAG_OTHER_BSS, + NL80211_MNTR_FLAG_COOK_FRAMES, + NL80211_MNTR_FLAG_ACTIVE, + + /* keep last */ + __NL80211_MNTR_FLAG_AFTER_LAST, + NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mesh_power_mode - mesh power save modes + * + * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is + * not known or has not been set yet. + * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is + * in Awake state all the time. + * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will + * alternate between Active and Doze states, but will wake up for + * neighbor's beacons. + * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will + * alternate between Active and Doze states, but may not wake up + * for neighbor's beacons. + * + * @__NL80211_MESH_POWER_AFTER_LAST - internal use + * @NL80211_MESH_POWER_MAX - highest possible power save level + */ + +enum nl80211_mesh_power_mode { + NL80211_MESH_POWER_UNKNOWN, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_LIGHT_SLEEP, + NL80211_MESH_POWER_DEEP_SLEEP, + + __NL80211_MESH_POWER_AFTER_LAST, + NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 +}; + +/** + * enum nl80211_meshconf_params - mesh configuration parameters + * + * Mesh configuration parameters. These can be changed while the mesh is + * active. + * + * @__NL80211_MESHCONF_INVALID: internal use + * + * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in + * millisecond units, used by the Peer Link Open message + * + * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in + * millisecond units, used by the peer link management to close a peer link + * + * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in + * millisecond units + * + * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed + * on this mesh interface + * + * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link + * open retries that can be sent to establish a new peer link instance in a + * mesh + * + * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh + * point. + * + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open + * peer links when we detect compatible mesh peers. Disabled if + * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are + * set. + * + * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames + * containing a PREQ that an MP can send to a particular destination (path + * target) + * + * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths + * (in milliseconds) + * + * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait + * until giving up on a path discovery (in milliseconds) + * + * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh + * points receiving a PREQ shall consider the forwarding information from + * the root to be valid. (TU = time unit) + * + * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element + * + * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) + * that it takes for an HWMP information element to propagate across the + * mesh + * + * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not + * + * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a + * source mesh point for path selection elements. + * + * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between + * root announcements are transmitted. + * + * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. + * + * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. + * + * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding + * or forwarding entity (default is TRUE - forwarding entity) + * + * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the + * threshold for average signal strength of candidate station to establish + * a peer link. + * + * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors + * to synchronize to for 11s default synchronization method + * (see 11C.12.2.2) + * + * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. + * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for + * which mesh STAs receiving a proactive PREQ shall consider the forwarding + * information to the root mesh STA to be valid. + * + * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between + * proactive PREQs are transmitted. + * + * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time + * (in TUs) during which a mesh STA can send only one Action frame + * containing a PREQ element for root path confirmation. + * + * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. + * type &enum nl80211_mesh_power_mode (u32) + * + * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) + * + * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've + * established peering with for longer than this time (in seconds), then + * remove it from the STA's list of peers. You may set this to 0 to disable + * the removal of the STA. Default is 30 minutes. + * + * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA + * will advertise that it is connected to a gate in the mesh formation + * field. If left unset then the mesh formation field will only + * advertise such if there is an active root mesh path. + * + * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g. + * PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that + * this might not be the optimal decision as a multi-hop route might be + * better. So if using this setting you will likely also want to disable + * dot11MeshForwarding and use another mesh routing protocol on top. + * + * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA + * will advertise that it is connected to a authentication server + * in the mesh formation field. + * + * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use + */ +enum nl80211_meshconf_params { + __NL80211_MESHCONF_INVALID, + NL80211_MESHCONF_RETRY_TIMEOUT, + NL80211_MESHCONF_CONFIRM_TIMEOUT, + NL80211_MESHCONF_HOLDING_TIMEOUT, + NL80211_MESHCONF_MAX_PEER_LINKS, + NL80211_MESHCONF_MAX_RETRIES, + NL80211_MESHCONF_TTL, + NL80211_MESHCONF_AUTO_OPEN_PLINKS, + NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, + NL80211_MESHCONF_PATH_REFRESH_TIME, + NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, + NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, + NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + NL80211_MESHCONF_HWMP_ROOTMODE, + NL80211_MESHCONF_ELEMENT_TTL, + NL80211_MESHCONF_HWMP_RANN_INTERVAL, + NL80211_MESHCONF_GATE_ANNOUNCEMENTS, + NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, + NL80211_MESHCONF_FORWARDING, + NL80211_MESHCONF_RSSI_THRESHOLD, + NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, + NL80211_MESHCONF_HT_OPMODE, + NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + NL80211_MESHCONF_POWER_MODE, + NL80211_MESHCONF_AWAKE_WINDOW, + NL80211_MESHCONF_PLINK_TIMEOUT, + NL80211_MESHCONF_CONNECTED_TO_GATE, + NL80211_MESHCONF_NOLEARN, + NL80211_MESHCONF_CONNECTED_TO_AS, + + /* keep last */ + __NL80211_MESHCONF_ATTR_AFTER_LAST, + NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mesh_setup_params - mesh setup parameters + * + * Mesh setup parameters. These are used to start/join a mesh and cannot be + * changed while the mesh is active. + * + * @__NL80211_MESH_SETUP_INVALID: Internal use + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a + * vendor specific path selection algorithm or disable it to use the + * default HWMP. + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a + * vendor specific path metric or disable it to use the default Airtime + * metric. + * + * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a + * robust security network ie, or a vendor specific information element + * that vendors will use to identify the path selection methods and + * metrics in use. + * + * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication + * daemon will be authenticating mesh candidates. + * + * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication + * daemon will be securing peer link frames. AMPE is a secured version of + * Mesh Peering Management (MPM) and is implemented with the assistance of + * a userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and + * key management). When the flag is unset (default), the kernel can + * autonomously complete (unsecured) mesh peering without the need of a + * userspace daemon. + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * + * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will + * implement an MPM which handles peer allocation and state. + * + * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication + * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). + * Default is no authentication method required. + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * + * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use + */ +enum nl80211_mesh_setup_params { + __NL80211_MESH_SETUP_INVALID, + NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, + NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, + NL80211_MESH_SETUP_IE, + NL80211_MESH_SETUP_USERSPACE_AUTH, + NL80211_MESH_SETUP_USERSPACE_AMPE, + NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, + NL80211_MESH_SETUP_USERSPACE_MPM, + NL80211_MESH_SETUP_AUTH_PROTOCOL, + + /* keep last */ + __NL80211_MESH_SETUP_ATTR_AFTER_LAST, + NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_txq_attr - TX queue parameter attributes + * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved + * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) + * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning + * disabled + * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number + */ +enum nl80211_txq_attr { + __NL80211_TXQ_ATTR_INVALID, + NL80211_TXQ_ATTR_AC, + NL80211_TXQ_ATTR_TXOP, + NL80211_TXQ_ATTR_CWMIN, + NL80211_TXQ_ATTR_CWMAX, + NL80211_TXQ_ATTR_AIFS, + + /* keep last */ + __NL80211_TXQ_ATTR_AFTER_LAST, + NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 +}; + +enum nl80211_ac { + NL80211_AC_VO, + NL80211_AC_VI, + NL80211_AC_BE, + NL80211_AC_BK, + NL80211_NUM_ACS +}; + +/* backward compat */ +#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC +#define NL80211_TXQ_Q_VO NL80211_AC_VO +#define NL80211_TXQ_Q_VI NL80211_AC_VI +#define NL80211_TXQ_Q_BE NL80211_AC_BE +#define NL80211_TXQ_Q_BK NL80211_AC_BK + +/** + * enum nl80211_channel_type - channel type + * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel + * @NL80211_CHAN_HT20: 20 MHz HT channel + * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel + * below the control channel + * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel + * above the control channel + */ +enum nl80211_channel_type { + NL80211_CHAN_NO_HT, + NL80211_CHAN_HT20, + NL80211_CHAN_HT40MINUS, + NL80211_CHAN_HT40PLUS +}; + +/** + * enum nl80211_key_mode - Key mode + * + * @NL80211_KEY_RX_TX: (Default) + * Key can be used for Rx and Tx immediately + * + * The following modes can only be selected for unicast keys and when the + * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: + * + * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: + * Unicast key can only be used for Rx, Tx not allowed, yet + * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: + * The unicast key identified by idx and mac is cleared for Tx and becomes + * the preferred Tx key for the station. + */ +enum nl80211_key_mode { + NL80211_KEY_RX_TX, + NL80211_KEY_NO_TX, + NL80211_KEY_SET_TX +}; + +/** + * enum nl80211_chan_width - channel width definitions + * + * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH + * attribute. + * + * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel + * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel + * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well + * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel + * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel + * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel + * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel + * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel + * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel + * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel + * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + */ +enum nl80211_chan_width { + NL80211_CHAN_WIDTH_20_NOHT, + NL80211_CHAN_WIDTH_20, + NL80211_CHAN_WIDTH_40, + NL80211_CHAN_WIDTH_80, + NL80211_CHAN_WIDTH_80P80, + NL80211_CHAN_WIDTH_160, + NL80211_CHAN_WIDTH_5, + NL80211_CHAN_WIDTH_10, + NL80211_CHAN_WIDTH_1, + NL80211_CHAN_WIDTH_2, + NL80211_CHAN_WIDTH_4, + NL80211_CHAN_WIDTH_8, + NL80211_CHAN_WIDTH_16, + NL80211_CHAN_WIDTH_320, +}; + +/** + * enum nl80211_bss_scan_width - control channel width for a BSS + * + * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. + * + * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible + * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide + * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide + * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide + */ +enum nl80211_bss_scan_width { + NL80211_BSS_CHAN_WIDTH_20, + NL80211_BSS_CHAN_WIDTH_10, + NL80211_BSS_CHAN_WIDTH_5, + NL80211_BSS_CHAN_WIDTH_1, + NL80211_BSS_CHAN_WIDTH_2, +}; + +/** + * enum nl80211_bss - netlink attributes for a BSS + * + * @__NL80211_BSS_INVALID: invalid + * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) + * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) + * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) + * (if @NL80211_BSS_PRESP_DATA is present then this is known to be + * from a probe response, otherwise it may be from the same beacon + * that the NL80211_BSS_BEACON_TSF will be from) + * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) + * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) + * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the + * raw information elements from the probe response/beacon (bin); + * if the %NL80211_BSS_BEACON_IES attribute is present and the data is + * different then the IEs here are from a Probe Response frame; otherwise + * they are from a Beacon frame. + * However, if the driver does not indicate the source of the IEs, these + * IEs may be from either frame subtype. + * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the + * data here is known to be from a probe response, without any heuristics. + * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon + * in mBm (100 * dBm) (s32) + * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon + * in unspecified units, scaled to 0..100 (u8) + * @NL80211_BSS_STATUS: status, if this BSS is "used" + * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms + * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information + * elements from a Beacon frame (bin); not present if no Beacon frame has + * yet been received + * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel + * (u32, enum nl80211_bss_scan_width) + * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) + * (not present if no beacon frame has been received yet) + * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and + * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) + * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry + * was last updated by a received frame. The value is expected to be + * accurate to about 10ms. (u64, nanoseconds) + * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first + * octet of the timestamp field of the last beacon/probe received for + * this BSS. The time is the TSF of the BSS specified by + * @NL80211_BSS_PARENT_BSSID. (u64). + * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF + * is set. + * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. + * Contains a nested array of signal strength attributes (u8, dBm), + * using the nesting index as the antenna number. + * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz + * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). + * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it. + * @__NL80211_BSS_AFTER_LAST: internal + * @NL80211_BSS_MAX: highest BSS attribute + */ +enum nl80211_bss { + __NL80211_BSS_INVALID, + NL80211_BSS_BSSID, + NL80211_BSS_FREQUENCY, + NL80211_BSS_TSF, + NL80211_BSS_BEACON_INTERVAL, + NL80211_BSS_CAPABILITY, + NL80211_BSS_INFORMATION_ELEMENTS, + NL80211_BSS_SIGNAL_MBM, + NL80211_BSS_SIGNAL_UNSPEC, + NL80211_BSS_STATUS, + NL80211_BSS_SEEN_MS_AGO, + NL80211_BSS_BEACON_IES, + NL80211_BSS_CHAN_WIDTH, + NL80211_BSS_BEACON_TSF, + NL80211_BSS_PRESP_DATA, + NL80211_BSS_LAST_SEEN_BOOTTIME, + NL80211_BSS_PAD, + NL80211_BSS_PARENT_TSF, + NL80211_BSS_PARENT_BSSID, + NL80211_BSS_CHAIN_SIGNAL, + NL80211_BSS_FREQUENCY_OFFSET, + NL80211_BSS_MLO_LINK_ID, + NL80211_BSS_MLD_ADDR, + + /* keep last */ + __NL80211_BSS_AFTER_LAST, + NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_bss_status - BSS "status" + * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. + * Note that this is no longer used since cfg80211 no longer + * keeps track of whether or not authentication was done with + * a given BSS. + * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. + * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. + * + * The BSS status is a BSS attribute in scan dumps, which + * indicates the status the interface has wrt. this BSS. + */ +enum nl80211_bss_status { + NL80211_BSS_STATUS_AUTHENTICATED, + NL80211_BSS_STATUS_ASSOCIATED, + NL80211_BSS_STATUS_IBSS_JOINED, +}; + +/** + * enum nl80211_auth_type - AuthenticationType + * + * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication + * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) + * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) + * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals + * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key + * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS + * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key + * @__NL80211_AUTHTYPE_NUM: internal + * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm + * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by + * trying multiple times); this is invalid in netlink -- leave out + * the attribute for this on CONNECT commands. + */ +enum nl80211_auth_type { + NL80211_AUTHTYPE_OPEN_SYSTEM, + NL80211_AUTHTYPE_SHARED_KEY, + NL80211_AUTHTYPE_FT, + NL80211_AUTHTYPE_NETWORK_EAP, + NL80211_AUTHTYPE_SAE, + NL80211_AUTHTYPE_FILS_SK, + NL80211_AUTHTYPE_FILS_SK_PFS, + NL80211_AUTHTYPE_FILS_PK, + + /* keep last */ + __NL80211_AUTHTYPE_NUM, + NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, + NL80211_AUTHTYPE_AUTOMATIC +}; + +/** + * enum nl80211_key_type - Key Type + * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key + * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key + * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) + * @NUM_NL80211_KEYTYPES: number of defined key types + */ +enum nl80211_key_type { + NL80211_KEYTYPE_GROUP, + NL80211_KEYTYPE_PAIRWISE, + NL80211_KEYTYPE_PEERKEY, + + NUM_NL80211_KEYTYPES +}; + +/** + * enum nl80211_mfp - Management frame protection state + * @NL80211_MFP_NO: Management frame protection not used + * @NL80211_MFP_REQUIRED: Management frame protection required + * @NL80211_MFP_OPTIONAL: Management frame protection is optional + */ +enum nl80211_mfp { + NL80211_MFP_NO, + NL80211_MFP_REQUIRED, + NL80211_MFP_OPTIONAL, +}; + +enum nl80211_wpa_versions { + NL80211_WPA_VERSION_1 = 1 << 0, + NL80211_WPA_VERSION_2 = 1 << 1, + NL80211_WPA_VERSION_3 = 1 << 2, +}; + +/** + * enum nl80211_key_default_types - key default types + * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid + * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default + * unicast key + * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default + * multicast key + * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types + */ +enum nl80211_key_default_types { + __NL80211_KEY_DEFAULT_TYPE_INVALID, + NL80211_KEY_DEFAULT_TYPE_UNICAST, + NL80211_KEY_DEFAULT_TYPE_MULTICAST, + + NUM_NL80211_KEY_DEFAULT_TYPES +}; + +/** + * enum nl80211_key_attributes - key attributes + * @__NL80211_KEY_INVALID: invalid + * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_KEY_IDX: key ID (u8, 0-3) + * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * @NL80211_KEY_DEFAULT: flag indicating default key + * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key + * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not + * specified the default depends on whether a MAC address was + * given with the command using the key or not (u32) + * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. + * Defaults to @NL80211_KEY_RX_TX. + * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key + * + * @__NL80211_KEY_AFTER_LAST: internal + * @NL80211_KEY_MAX: highest key attribute + */ +enum nl80211_key_attributes { + __NL80211_KEY_INVALID, + NL80211_KEY_DATA, + NL80211_KEY_IDX, + NL80211_KEY_CIPHER, + NL80211_KEY_SEQ, + NL80211_KEY_DEFAULT, + NL80211_KEY_DEFAULT_MGMT, + NL80211_KEY_TYPE, + NL80211_KEY_DEFAULT_TYPES, + NL80211_KEY_MODE, + NL80211_KEY_DEFAULT_BEACON, + + /* keep last */ + __NL80211_KEY_AFTER_LAST, + NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 +}; + +/** + * enum nl80211_tx_rate_attributes - TX rate set attributes + * @__NL80211_TXRATE_INVALID: invalid + * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection + * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with + * 1 = 500 kbps) but without the IE length restriction (at most + * %NL80211_MAX_SUPP_RATES in a single array). + * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection + * in an array of MCS numbers. + * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, + * see &struct nl80211_txrate_vht + * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi + * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection, + * see &struct nl80211_txrate_he + * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. + * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. + * @__NL80211_TXRATE_AFTER_LAST: internal + * @NL80211_TXRATE_MAX: highest TX rate attribute + */ +enum nl80211_tx_rate_attributes { + __NL80211_TXRATE_INVALID, + NL80211_TXRATE_LEGACY, + NL80211_TXRATE_HT, + NL80211_TXRATE_VHT, + NL80211_TXRATE_GI, + NL80211_TXRATE_HE, + NL80211_TXRATE_HE_GI, + NL80211_TXRATE_HE_LTF, + + /* keep last */ + __NL80211_TXRATE_AFTER_LAST, + NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 +}; + +#define NL80211_TXRATE_MCS NL80211_TXRATE_HT +#define NL80211_VHT_NSS_MAX 8 + +/** + * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_vht { + __u16 mcs[NL80211_VHT_NSS_MAX]; +}; + +#define NL80211_HE_NSS_MAX 8 +/** + * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_he { + __u16 mcs[NL80211_HE_NSS_MAX]; +}; + +enum nl80211_txrate_gi { + NL80211_TXRATE_DEFAULT_GI, + NL80211_TXRATE_FORCE_SGI, + NL80211_TXRATE_FORCE_LGI, +}; + +/** + * enum nl80211_band - Frequency band + * @NL80211_BAND_2GHZ: 2.4 GHz ISM band + * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) + * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) + * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs + * @NL80211_BAND_LC: light communication band (placeholder) + * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace + * since newer kernel versions may support more bands + */ +enum nl80211_band { + NL80211_BAND_2GHZ, + NL80211_BAND_5GHZ, + NL80211_BAND_60GHZ, + NL80211_BAND_6GHZ, + NL80211_BAND_S1GHZ, + NL80211_BAND_LC, + + NUM_NL80211_BANDS, +}; + +/** + * enum nl80211_ps_state - powersave state + * @NL80211_PS_DISABLED: powersave is disabled + * @NL80211_PS_ENABLED: powersave is enabled + */ +enum nl80211_ps_state { + NL80211_PS_DISABLED, + NL80211_PS_ENABLED, +}; + +/** + * enum nl80211_attr_cqm - connection quality monitor attributes + * @__NL80211_ATTR_CQM_INVALID: invalid + * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies + * the threshold for the RSSI level at which an event will be sent. Zero + * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is + * set, multiple values can be supplied as a low-to-high sorted array of + * threshold values in dBm. Events will be sent when the RSSI value + * crosses any of the thresholds. + * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies + * the minimum amount the RSSI level must change after an event before a + * new event may be issued (to reduce effects of RSSI oscillation). + * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event + * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many + * consecutive packets were not acknowledged by the peer + * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures + * during the given %NL80211_ATTR_CQM_TXE_INTVL before an + * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and + * %NL80211_ATTR_CQM_TXE_PKTS is generated. + * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given + * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is + * checked. + * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic + * interval in which %NL80211_ATTR_CQM_TXE_PKTS and + * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an + * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. + * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon + * loss event + * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the + * RSSI threshold event. + * @__NL80211_ATTR_CQM_AFTER_LAST: internal + * @NL80211_ATTR_CQM_MAX: highest key attribute + */ +enum nl80211_attr_cqm { + __NL80211_ATTR_CQM_INVALID, + NL80211_ATTR_CQM_RSSI_THOLD, + NL80211_ATTR_CQM_RSSI_HYST, + NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, + NL80211_ATTR_CQM_PKT_LOSS_EVENT, + NL80211_ATTR_CQM_TXE_RATE, + NL80211_ATTR_CQM_TXE_PKTS, + NL80211_ATTR_CQM_TXE_INTVL, + NL80211_ATTR_CQM_BEACON_LOSS_EVENT, + NL80211_ATTR_CQM_RSSI_LEVEL, + + /* keep last */ + __NL80211_ATTR_CQM_AFTER_LAST, + NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 +}; + +/** + * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the + * configured threshold + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the + * configured threshold + * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) + */ +enum nl80211_cqm_rssi_threshold_event { + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, + NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + NL80211_CQM_RSSI_BEACON_LOSS_EVENT, +}; + + +/** + * enum nl80211_tx_power_setting - TX power adjustment + * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power + * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter + * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter + */ +enum nl80211_tx_power_setting { + NL80211_TX_POWER_AUTOMATIC, + NL80211_TX_POWER_LIMITED, + NL80211_TX_POWER_FIXED, +}; + +/** + * enum nl80211_tid_config - TID config state + * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID + * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID + */ +enum nl80211_tid_config { + NL80211_TID_CONFIG_ENABLE, + NL80211_TID_CONFIG_DISABLE, +}; + +/* enum nl80211_tx_rate_setting - TX rate configuration type + * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate + * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter + * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter + */ +enum nl80211_tx_rate_setting { + NL80211_TX_RATE_AUTOMATIC, + NL80211_TX_RATE_LIMITED, + NL80211_TX_RATE_FIXED, +}; + +/* enum nl80211_tid_config_attr - TID specific configuration. + * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values + * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported + * for per-vif configuration; doesn't list the ones that are generic + * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). + * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but + * per peer instead. + * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates + * that the new configuration overrides all previous peer + * configurations, otherwise previous peer specific configurations + * should be left untouched. + * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) + * Its type is u16. + * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. + * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. + * Its type is u8. + * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame + * transmission, user-space sets this configuration in + * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and + * the max value is advertised by the driver in this attribute on + * output in wiphy capabilities. + * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame + * transmission, user-space sets this configuration in + * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and + * the max value is advertised by the driver in this attribute on + * output in wiphy capabilities. + * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. + * Its type is u8, using the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs + * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using + * the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. + * Its type is u8, using the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful + * to notfiy the driver that what type of txrate should be used + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using + * the values form &nl80211_tx_rate_setting. + * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied + * with the parameters passed through %NL80211_ATTR_TX_RATES. + * configuration is applied to the data frame for the tid to that connected + * station. + */ +enum nl80211_tid_config_attr { + __NL80211_TID_CONFIG_ATTR_INVALID, + NL80211_TID_CONFIG_ATTR_PAD, + NL80211_TID_CONFIG_ATTR_VIF_SUPP, + NL80211_TID_CONFIG_ATTR_PEER_SUPP, + NL80211_TID_CONFIG_ATTR_OVERRIDE, + NL80211_TID_CONFIG_ATTR_TIDS, + NL80211_TID_CONFIG_ATTR_NOACK, + NL80211_TID_CONFIG_ATTR_RETRY_SHORT, + NL80211_TID_CONFIG_ATTR_RETRY_LONG, + NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, + NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, + NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, + NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, + NL80211_TID_CONFIG_ATTR_TX_RATE, + + /* keep last */ + __NL80211_TID_CONFIG_ATTR_AFTER_LAST, + NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_packet_pattern_attr - packet pattern attribute + * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute + * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has + * a zero bit are ignored + * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have + * a bit for each byte in the pattern. The lowest-order bit corresponds + * to the first byte of the pattern, but the bytes of the pattern are + * in a little-endian-like format, i.e. the 9th byte of the pattern + * corresponds to the lowest-order bit in the second byte of the mask. + * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where + * xx indicates "don't care") would be represented by a pattern of + * twelve zero bytes, and a mask of "0xed,0x01". + * Note that the pattern matching is done as though frames were not + * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked + * first (including SNAP header unpacking) and then matched. + * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after + * these fixed number of bytes of received packet + * @NUM_NL80211_PKTPAT: number of attributes + * @MAX_NL80211_PKTPAT: max attribute number + */ +enum nl80211_packet_pattern_attr { + __NL80211_PKTPAT_INVALID, + NL80211_PKTPAT_MASK, + NL80211_PKTPAT_PATTERN, + NL80211_PKTPAT_OFFSET, + + NUM_NL80211_PKTPAT, + MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, +}; + +/** + * struct nl80211_pattern_support - packet pattern support information + * @max_patterns: maximum number of patterns supported + * @min_pattern_len: minimum length of each pattern + * @max_pattern_len: maximum length of each pattern + * @max_pkt_offset: maximum Rx packet offset + * + * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when + * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in + * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of + * %NL80211_ATTR_COALESCE_RULE in the capability information given + * by the kernel to userspace. + */ +struct nl80211_pattern_support { + __u32 max_patterns; + __u32 min_pattern_len; + __u32 max_pattern_len; + __u32 max_pkt_offset; +} __attribute__((packed)); + +/* only for backward compatibility */ +#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID +#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK +#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN +#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET +#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT +#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT +#define nl80211_wowlan_pattern_support nl80211_pattern_support + +/** + * enum nl80211_wowlan_triggers - WoWLAN trigger definitions + * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put + * the chip into a special state -- works best with chips that have + * support for low-power operation already (flag) + * Note that this mode is incompatible with all of the others, if + * any others are even supported by the device. + * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect + * is detected is implementation-specific (flag) + * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed + * by 16 repetitions of MAC addr, anywhere in payload) (flag) + * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns + * which are passed in an array of nested attributes, each nested attribute + * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. + * Each pattern defines a wakeup packet. Packet offset is associated with + * each pattern which is used while matching the pattern. The matching is + * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the + * pattern matching is done after the packet is converted to the MSDU. + * + * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute + * carrying a &struct nl80211_pattern_support. + * + * When reporting wakeup. it is a u32 attribute containing the 0-based + * index of the pattern that caused the wakeup, in the patterns passed + * to the kernel when configuring. + * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be + * used when setting, used only to indicate that GTK rekeying is supported + * by the device (flag) + * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if + * done by the device) (flag) + * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request + * packet (flag) + * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) + * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released + * (on devices that have rfkill in the device) (flag) + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains + * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame + * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN + * attribute contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the + * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may + * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute + * contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section + * "TCP connection wakeup" for more details. This is a nested attribute + * containing the exact information for establishing and keeping alive + * the TCP connection. + * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * wakeup packet was received on the TCP connection + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the + * TCP connection was lost or failed to be established + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service + * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network + * is detected. This is a nested attribute that contains the + * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It + * specifies how the scan is performed (e.g. the interval, the + * channels to scan and the initial delay) as well as the scan + * results that will trigger a wake (i.e. the matchsets). This + * attribute is also sent in a response to + * @NL80211_CMD_GET_WIPHY, indicating the number of match sets + * supported by the driver (u32). + * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute + * containing an array with information about what triggered the + * wake up. If no elements are present in the array, it means + * that the information is not available. If more than one + * element is present, it means that more than one match + * occurred. + * Each element in the array is a nested attribute that contains + * one optional %NL80211_ATTR_SSID attribute and one optional + * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of + * these attributes must be present. If + * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one + * frequency, it means that the match occurred in more than one + * channel. + * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers + * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + * + * These nested attributes are used to configure the wakeup triggers and + * to report the wakeup reason(s). + */ +enum nl80211_wowlan_triggers { + __NL80211_WOWLAN_TRIG_INVALID, + NL80211_WOWLAN_TRIG_ANY, + NL80211_WOWLAN_TRIG_DISCONNECT, + NL80211_WOWLAN_TRIG_MAGIC_PKT, + NL80211_WOWLAN_TRIG_PKT_PATTERN, + NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, + NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, + NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, + NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, + NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, + NL80211_WOWLAN_TRIG_TCP_CONNECTION, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, + NL80211_WOWLAN_TRIG_NET_DETECT, + NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, + + /* keep last */ + NUM_NL80211_WOWLAN_TRIG, + MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 +}; + +/** + * DOC: TCP connection wakeup + * + * Some devices can establish a TCP connection in order to be woken up by a + * packet coming in from outside their network segment, or behind NAT. If + * configured, the device will establish a TCP connection to the given + * service, and periodically send data to that service. The first data + * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. + * The data packets can optionally include a (little endian) sequence + * number (in the TCP payload!) that is generated by the device, and, also + * optionally, a token from a list of tokens. This serves as a keep-alive + * with the service, and for NATed connections, etc. + * + * During this keep-alive period, the server doesn't send any data to the + * client. When receiving data, it is compared against the wakeup pattern + * (and mask) and if it matches, the host is woken up. Similarly, if the + * connection breaks or cannot be established to start with, the host is + * also woken up. + * + * Developer's note: ARP offload is required for this, otherwise TCP + * response packets might not go through correctly. + */ + +/** + * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence + * @start: starting value + * @offset: offset of sequence number in packet + * @len: length of the sequence value to write, 1 through 4 + * + * Note: don't confuse with the TCP sequence number(s), this is for the + * keepalive packet payload. The actual value is written into the packet + * in little endian. + */ +struct nl80211_wowlan_tcp_data_seq { + __u32 start, offset, len; +}; + +/** + * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config + * @offset: offset of token in packet + * @len: length of each token + * @token_stream: stream of data to be used for the tokens, the length must + * be a multiple of @len for this to make sense + */ +struct nl80211_wowlan_tcp_data_token { + __u32 offset, len; + __u8 token_stream[]; +}; + +/** + * struct nl80211_wowlan_tcp_data_token_feature - data token features + * @min_len: minimum token length + * @max_len: maximum token length + * @bufsize: total available token buffer size (max size of @token_stream) + */ +struct nl80211_wowlan_tcp_data_token_feature { + __u32 min_len, max_len, bufsize; +}; + +/** + * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters + * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) + * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address + * (in network byte order) + * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because + * route lookup when configured might be invalid by the time we suspend, + * and doing a route lookup when suspending is no longer possible as it + * might require ARP querying. + * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a + * socket and port will be allocated + * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. + * For feature advertising, a u32 attribute holding the maximum length + * of the data payload. + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration + * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature + * advertising it is just a flag + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, + * see &struct nl80211_wowlan_tcp_data_token and for advertising see + * &struct nl80211_wowlan_tcp_data_token_feature. + * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum + * interval in feature advertising (u32) + * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a + * u32 attribute holding the maximum length + * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for + * feature advertising. The mask works like @NL80211_PKTPAT_MASK + * but on the TCP payload only. + * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes + * @MAX_NL80211_WOWLAN_TCP: highest attribute number + */ +enum nl80211_wowlan_tcp_attrs { + __NL80211_WOWLAN_TCP_INVALID, + NL80211_WOWLAN_TCP_SRC_IPV4, + NL80211_WOWLAN_TCP_DST_IPV4, + NL80211_WOWLAN_TCP_DST_MAC, + NL80211_WOWLAN_TCP_SRC_PORT, + NL80211_WOWLAN_TCP_DST_PORT, + NL80211_WOWLAN_TCP_DATA_PAYLOAD, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + NL80211_WOWLAN_TCP_DATA_INTERVAL, + NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + NL80211_WOWLAN_TCP_WAKE_MASK, + + /* keep last */ + NUM_NL80211_WOWLAN_TCP, + MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 +}; + +/** + * struct nl80211_coalesce_rule_support - coalesce rule support information + * @max_rules: maximum number of rules supported + * @pat: packet pattern support information + * @max_delay: maximum supported coalescing delay in msecs + * + * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the + * capability information given by the kernel to userspace. + */ +struct nl80211_coalesce_rule_support { + __u32 max_rules; + struct nl80211_pattern_support pat; + __u32 max_delay; +} __attribute__((packed)); + +/** + * enum nl80211_attr_coalesce_rule - coalesce rule attribute + * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute + * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing + * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, + * see &enum nl80211_coalesce_condition. + * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched + * after these fixed number of bytes of received packet + * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes + * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number + */ +enum nl80211_attr_coalesce_rule { + __NL80211_COALESCE_RULE_INVALID, + NL80211_ATTR_COALESCE_RULE_DELAY, + NL80211_ATTR_COALESCE_RULE_CONDITION, + NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, + + /* keep last */ + NUM_NL80211_ATTR_COALESCE_RULE, + NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 +}; + +/** + * enum nl80211_coalesce_condition - coalesce rule conditions + * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns + * in a rule are matched. + * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns + * in a rule are not matched. + */ +enum nl80211_coalesce_condition { + NL80211_COALESCE_CONDITION_MATCH, + NL80211_COALESCE_CONDITION_NO_MATCH +}; + +/** + * enum nl80211_iface_limit_attrs - limit attributes + * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) + * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that + * can be chosen from this set of interface types (u32) + * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a + * flag attribute for each interface type in this set + * @NUM_NL80211_IFACE_LIMIT: number of attributes + * @MAX_NL80211_IFACE_LIMIT: highest attribute number + */ +enum nl80211_iface_limit_attrs { + NL80211_IFACE_LIMIT_UNSPEC, + NL80211_IFACE_LIMIT_MAX, + NL80211_IFACE_LIMIT_TYPES, + + /* keep last */ + NUM_NL80211_IFACE_LIMIT, + MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 +}; + +/** + * enum nl80211_if_combination_attrs -- interface combination attributes + * + * @NL80211_IFACE_COMB_UNSPEC: (reserved) + * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits + * for given interface types, see &enum nl80211_iface_limit_attrs. + * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of + * interfaces that can be created in this group. This number doesn't + * apply to interfaces purely managed in software, which are listed + * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. + * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that + * beacon intervals within this group must be all the same even for + * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt + * the infrastructure network's beacon interval. + * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many + * different channels may be used within this group. + * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap + * of supported channel widths for radar detection. + * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap + * of supported regulatory regions for radar detection. + * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of + * different beacon intervals supported by all the interface combinations + * in this group (if not present, all beacon intervals be identical). + * @NUM_NL80211_IFACE_COMB: number of attributes + * @MAX_NL80211_IFACE_COMB: highest attribute number + * + * Examples: + * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 + * => allows an AP and a STA that must match BIs + * + * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8, + * => allows 8 of AP/GO that can have BI gcd >= min gcd + * + * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 + * => allows two STAs on the same or on different channels + * + * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 + * => allows a STA plus three P2P interfaces + * + * The list of these four possibilities could completely be contained + * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate + * that any of these groups must match. + * + * "Combinations" of just a single interface will not be listed here, + * a single interface of any valid interface type is assumed to always + * be possible by itself. This means that implicitly, for each valid + * interface type, the following group always exists: + * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 + */ +enum nl80211_if_combination_attrs { + NL80211_IFACE_COMB_UNSPEC, + NL80211_IFACE_COMB_LIMITS, + NL80211_IFACE_COMB_MAXNUM, + NL80211_IFACE_COMB_STA_AP_BI_MATCH, + NL80211_IFACE_COMB_NUM_CHANNELS, + NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, + NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, + NL80211_IFACE_COMB_BI_MIN_GCD, + + /* keep last */ + NUM_NL80211_IFACE_COMB, + MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 +}; + + +/** + * enum nl80211_plink_state - state of a mesh peer link finite state machine + * + * @NL80211_PLINK_LISTEN: initial state, considered the implicit + * state of non existent mesh peer links + * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to + * this mesh peer + * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received + * from this mesh peer + * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been + * received from this mesh peer + * @NL80211_PLINK_ESTAB: mesh peer link is established + * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled + * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh + * plink are discarded, except for authentication frames + * @NUM_NL80211_PLINK_STATES: number of peer link states + * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states + */ +enum nl80211_plink_state { + NL80211_PLINK_LISTEN, + NL80211_PLINK_OPN_SNT, + NL80211_PLINK_OPN_RCVD, + NL80211_PLINK_CNF_RCVD, + NL80211_PLINK_ESTAB, + NL80211_PLINK_HOLDING, + NL80211_PLINK_BLOCKED, + + /* keep last */ + NUM_NL80211_PLINK_STATES, + MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 +}; + +/** + * enum nl80211_plink_action - actions to perform in mesh peers + * + * @NL80211_PLINK_ACTION_NO_ACTION: perform no action + * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment + * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer + * @NUM_NL80211_PLINK_ACTIONS: number of possible actions + */ +enum plink_actions { + NL80211_PLINK_ACTION_NO_ACTION, + NL80211_PLINK_ACTION_OPEN, + NL80211_PLINK_ACTION_BLOCK, + + NUM_NL80211_PLINK_ACTIONS, +}; + + +#define NL80211_KCK_LEN 16 +#define NL80211_KEK_LEN 16 +#define NL80211_KCK_EXT_LEN 24 +#define NL80211_KEK_EXT_LEN 32 +#define NL80211_REPLAY_CTR_LEN 8 + +/** + * enum nl80211_rekey_data - attributes for GTK rekey offload + * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes + * @NL80211_REKEY_DATA_KEK: key encryption key (binary) + * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) + * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) + * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) + * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) + * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) + */ +enum nl80211_rekey_data { + __NL80211_REKEY_DATA_INVALID, + NL80211_REKEY_DATA_KEK, + NL80211_REKEY_DATA_KCK, + NL80211_REKEY_DATA_REPLAY_CTR, + NL80211_REKEY_DATA_AKM, + + /* keep last */ + NUM_NL80211_REKEY_DATA, + MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 +}; + +/** + * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID + * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in + * Beacon frames) + * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element + * in Beacon frames + * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID + * element in Beacon frames but zero out each byte in the SSID + */ +enum nl80211_hidden_ssid { + NL80211_HIDDEN_SSID_NOT_IN_USE, + NL80211_HIDDEN_SSID_ZERO_LEN, + NL80211_HIDDEN_SSID_ZERO_CONTENTS +}; + +/** + * enum nl80211_sta_wme_attr - station WME attributes + * @__NL80211_STA_WME_INVALID: invalid number for nested attribute + * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format + * is the same as the AC bitmap in the QoS info field. + * @NL80211_STA_WME_MAX_SP: max service period. the format is the same + * as the MAX_SP field in the QoS info field (but already shifted down). + * @__NL80211_STA_WME_AFTER_LAST: internal + * @NL80211_STA_WME_MAX: highest station WME attribute + */ +enum nl80211_sta_wme_attr { + __NL80211_STA_WME_INVALID, + NL80211_STA_WME_UAPSD_QUEUES, + NL80211_STA_WME_MAX_SP, + + /* keep last */ + __NL80211_STA_WME_AFTER_LAST, + NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 +}; + +/** + * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates + * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes + * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher + * priority) + * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) + * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) + * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes + * (internal) + * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute + * (internal) + */ +enum nl80211_pmksa_candidate_attr { + __NL80211_PMKSA_CANDIDATE_INVALID, + NL80211_PMKSA_CANDIDATE_INDEX, + NL80211_PMKSA_CANDIDATE_BSSID, + NL80211_PMKSA_CANDIDATE_PREAUTH, + + /* keep last */ + NUM_NL80211_PMKSA_CANDIDATE, + MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 +}; + +/** + * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION + * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request + * @NL80211_TDLS_SETUP: Setup TDLS link + * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established + * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link + * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link + */ +enum nl80211_tdls_operation { + NL80211_TDLS_DISCOVERY_REQ, + NL80211_TDLS_SETUP, + NL80211_TDLS_TEARDOWN, + NL80211_TDLS_ENABLE_LINK, + NL80211_TDLS_DISABLE_LINK, +}; + +/** + * enum nl80211_ap_sme_features - device-integrated AP features + * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver + * when user space indicates support for SA Query procedures offload during + * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT. + */ +enum nl80211_ap_sme_features { + NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0, +}; + +/** + * enum nl80211_feature_flags - device/driver features + * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back + * TX status to the socket error queue when requested with the + * socket option. + * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. + * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up + * the connected inactive stations in AP mode. + * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested + * to work properly to support receiving regulatory hints from + * cellular base stations. + * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only + * here to reserve the value for API/ABI compatibility) + * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of + * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station + * mode + * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan + * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported + * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif + * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting + * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform + * OBSS scans and generate 20/40 BSS coex reports. This flag is used only + * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. + * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window + * setting + * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic + * powersave + * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state + * transitions for AP clients. Without this flag (and if the driver + * doesn't have the AP SME in the device) the driver supports adding + * stations only when they're associated and adds them in associated + * state (to later be transitioned into authorized), with this flag + * they should be added before even sending the authentication reply + * and then transitioned into authenticated, associated and authorized + * states using station flags. + * Note that even for drivers that support this, the default is to add + * stations in authenticated/associated state, so to add unauthenticated + * stations the authenticated/associated bits have to be set in the mask. + * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits + * (HT40, VHT 80/160 MHz) if this flag is set + * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh + * Peering Management entity which may be implemented by registering for + * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is + * still generated by the driver. + * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor + * interface. An active monitor interface behaves like a normal monitor + * interface, but gets added to the driver. It ensures that incoming + * unicast packets directed at the configured interface address get ACKed. + * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic + * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the + * lifetime of a BSS. + * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter + * Set IE to probe requests. + * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE + * to probe requests. + * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period + * requests sent to it by an AP. + * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the + * current tx power value into the TPC Report IE in the spectrum + * management TPC Report action frame, and in the Radio Measurement Link + * Measurement Report action frame. + * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout + * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used + * to enable dynack. + * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial + * multiplexing powersave, ie. can turn off all but one chain + * even on HT connections that should be using more chains. + * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial + * multiplexing powersave, ie. can turn off all but one chain + * and then wake the rest up as required after, for example, + * rts/cts handshake. + * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM + * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS + * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it + * needs to be able to handle Block-Ack agreements and other things. + * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring + * the vif's MAC address upon creation. + * See 'macaddr' field in the vif_params (cfg80211.h). + * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when + * operating as a TDLS peer. + * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a + * random MAC address during scan (if the device is unassociated); the + * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC + * address mask/value will be used. + * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports + * using a random MAC address for every scan iteration during scheduled + * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may + * be set for scheduled scan and the MAC address mask/value will be used. + * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a + * random MAC address for every scan iteration during "net detect", i.e. + * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may + * be set for scheduled scan and the MAC address mask/value will be used. + */ +enum nl80211_feature_flags { + NL80211_FEATURE_SK_TX_STATUS = 1 << 0, + NL80211_FEATURE_HT_IBSS = 1 << 1, + NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, + NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, + NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, + NL80211_FEATURE_SAE = 1 << 5, + NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, + NL80211_FEATURE_SCAN_FLUSH = 1 << 7, + NL80211_FEATURE_AP_SCAN = 1 << 8, + NL80211_FEATURE_VIF_TXPOWER = 1 << 9, + NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, + NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, + NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, + /* bit 13 is reserved */ + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, + NL80211_FEATURE_USERSPACE_MPM = 1 << 16, + NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, + NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, + NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, + NL80211_FEATURE_QUIET = 1 << 21, + NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, + NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, + NL80211_FEATURE_STATIC_SMPS = 1 << 24, + NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, + NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, + NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, + NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, + NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, + NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, + NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31, +}; + +/** + * enum nl80211_ext_feature_index - bit index of extended features. + * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. + * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can + * request to use RRM (see %NL80211_ATTR_USE_RRM) with + * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set + * the ASSOC_REQ_USE_RRM flag in the association request even if + * NL80211_FEATURE_QUIET is not advertized. + * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air + * sniffer which means that it can be configured to hear packets from + * certain groups which can be configured by the + * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, + * or can be configured to follow a station by configuring the + * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. + * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual + * time the scan started in scan results event. The time is the TSF of + * the BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the + * time the last beacon/probe was received. The time is the TSF of the + * BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of + * channel dwell time. + * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate + * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. + * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate + * configuration (AP/mesh) with HT rates. + * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate + * configuration (AP/mesh) with VHT rates. + * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup + * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode. + * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA + * in @NL80211_CMD_FRAME while not associated. + * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports + * randomized TA in @NL80211_CMD_FRAME while associated. + * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan + * for reporting BSSs with better RSSI than the current connected BSS + * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI). + * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the + * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more + * RSSI threshold values to monitor rather than exactly one threshold. + * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key + * authentication with %NL80211_CMD_CONNECT. + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way + * handshake with PSK in station mode (PSK is passed as part of the connect + * and associate commands), doing it in the host might not be supported. + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way + * handshake with 802.1X in station mode (will pass EAP frames to the host + * and accept the set_pmk/del_pmk commands), doing it in the host might not + * be supported. + * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding + * the max channel attribute in the FILS request params IE with the + * actual dwell time. + * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe + * response + * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending + * the first probe request in each channel at rate of at least 5.5Mbps. + * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports + * probe request tx deferral and suppression + * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL + * value in %NL80211_ATTR_USE_MFP. + * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. + * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. + * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. + * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. + * Device or driver will do all DFS-related actions by itself, + * informing user-space about CAC progress, radar detection event, + * channel change triggered by radar detection event. + * No need to start CAC from user-space, no need to react to + * "radar detected" event. + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and + * receiving control port frames over nl80211 instead of the netdevice. + * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports + * (average) ACK signal strength reporting. + * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate + * TXQs. + * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the + * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. + * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data + * except for supported rates from the probe request content if requested + * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. + * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine + * timing measurement responder role. + * + * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are + * able to rekey an in-use key correctly. Userspace must not rekey PTK keys + * if this flag is not set. Ignoring this can leak clear text packets and/or + * freeze the connection. + * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for + * Individually Addressed Frames" from IEEE802.11-2016. + * + * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime + * fairness for transmitted packets and has enabled airtime fairness + * scheduling. + * + * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching + * (set/del PMKSA operations) in AP mode. + * + * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports + * filtering of sched scan results using band specific RSSI thresholds. + * + * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power + * to a station. + * + * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in + * station mode (SAE password is passed as part of the connect command). + * + * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev + * with VLAN tagged frames and separate VLAN-specific netdevs added using + * vconfig similarly to the Ethernet case. + * + * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) + * feature, which prevents bufferbloat by using the expected transmission + * time to limit the amount of data buffered in the hardware. + * + * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection + * and can receive key configuration for BIGTK using key indexes 6 and 7. + * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon + * protection as a client only and cannot transmit protected beacons. + * + * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the + * forwarding of preauth frames over the control port. They are then + * handled as ordinary data frames. + * + * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames + * + * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations + * in IBSS mode, essentially by dropping their state. + * + * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations + * are possible for multicast frames and those will be reported properly. + * + * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and + * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to + * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be + * included in the scan request. + * + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver + * can report tx status for control port over nl80211 tx operations. + * + * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating + * Channel Validation (OCV) when using driver's SME for RSNA handshakes. + * + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way + * handshake with PSK in AP mode (PSK is passed as part of the start AP + * command). + * + * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication + * in AP mode (SAE password is passed as part of the start AP command). + * + * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery + * frames transmission + * + * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports + * unsolicited broadcast probe response transmission + * + * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate + * configuration (AP/mesh) with HE rates. + * + * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement + * exchange protocol. + * + * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement + * exchange protocol. + * + * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management + * frame protection for all management frames exchanged during the + * negotiation and range measurement procedure. + * + * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision + * detection and change announcemnts. + * + * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports + * FILS encryption and decryption for (Re)Association Request and Response + * frames. Userspace has to share FILS AAD details to the driver by using + * @NL80211_CMD_SET_FILS_AAD. + * + * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC + * detection. + * + * @NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE: Device can perform a MAC address + * change without having to bring the underlying network device down + * first. For example, in station mode this can be used to vary the + * origin MAC address prior to a connection to a new AP for privacy + * or other reasons. Note that certain driver specific restrictions + * might apply, e.g. no scans in progress, no offchannel operations + * in progress, and no active connections. + * + * @NUM_NL80211_EXT_FEATURES: number of extended features. + * @MAX_NL80211_EXT_FEATURES: highest extended feature index. + */ +enum nl80211_ext_feature_index { + NL80211_EXT_FEATURE_VHT_IBSS, + NL80211_EXT_FEATURE_RRM, + NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, + NL80211_EXT_FEATURE_SCAN_START_TIME, + NL80211_EXT_FEATURE_BSS_PARENT_TSF, + NL80211_EXT_FEATURE_SET_SCAN_DWELL, + NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + NL80211_EXT_FEATURE_BEACON_RATE_HT, + NL80211_EXT_FEATURE_BEACON_RATE_VHT, + NL80211_EXT_FEATURE_FILS_STA, + NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA, + NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED, + NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI, + NL80211_EXT_FEATURE_CQM_RSSI_LIST, + NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X, + NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME, + NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP, + NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, + NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, + NL80211_EXT_FEATURE_MFP_OPTIONAL, + NL80211_EXT_FEATURE_LOW_SPAN_SCAN, + NL80211_EXT_FEATURE_LOW_POWER_SCAN, + NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, + NL80211_EXT_FEATURE_DFS_OFFLOAD, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, + NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, + /* we renamed this - stay compatible */ + NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, + NL80211_EXT_FEATURE_TXQS, + NL80211_EXT_FEATURE_SCAN_RANDOM_SN, + NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, + NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, + NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, + NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, + NL80211_EXT_FEATURE_AP_PMKSA_CACHING, + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, + NL80211_EXT_FEATURE_EXT_KEY_ID, + NL80211_EXT_FEATURE_STA_TX_PWR, + NL80211_EXT_FEATURE_SAE_OFFLOAD, + NL80211_EXT_FEATURE_VLAN_OFFLOAD, + NL80211_EXT_FEATURE_AQL, + NL80211_EXT_FEATURE_BEACON_PROTECTION, + NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, + NL80211_EXT_FEATURE_PROTECTED_TWT, + NL80211_EXT_FEATURE_DEL_IBSS_STA, + NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, + NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, + NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, + NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK, + NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, + NL80211_EXT_FEATURE_FILS_DISCOVERY, + NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, + NL80211_EXT_FEATURE_BEACON_RATE_HE, + NL80211_EXT_FEATURE_SECURE_LTF, + NL80211_EXT_FEATURE_SECURE_RTT, + NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, + NL80211_EXT_FEATURE_BSS_COLOR, + NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, + NL80211_EXT_FEATURE_RADAR_BACKGROUND, + NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE, + + /* add new features before the definition below */ + NUM_NL80211_EXT_FEATURES, + MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 +}; + +/** + * enum nl80211_probe_resp_offload_support_attr - optional supported + * protocols for probe-response offloading by the driver/FW. + * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. + * Each enum value represents a bit in the bitmap of supported + * protocols. Typically a subset of probe-requests belonging to a + * supported protocol will be excluded from offload and uploaded + * to the host. + * + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u + */ +enum nl80211_probe_resp_offload_support_attr { + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, +}; + +/** + * enum nl80211_connect_failed_reason - connection request failed reasons + * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be + * handled by the AP is reached. + * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. + */ +enum nl80211_connect_failed_reason { + NL80211_CONN_FAIL_MAX_CLIENTS, + NL80211_CONN_FAIL_BLOCKED_CLIENT, +}; + +/** + * enum nl80211_timeout_reason - timeout reasons + * + * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified. + * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out. + * @NL80211_TIMEOUT_AUTH: Authentication timed out. + * @NL80211_TIMEOUT_ASSOC: Association timed out. + */ +enum nl80211_timeout_reason { + NL80211_TIMEOUT_UNSPECIFIED, + NL80211_TIMEOUT_SCAN, + NL80211_TIMEOUT_AUTH, + NL80211_TIMEOUT_ASSOC, +}; + +/** + * enum nl80211_scan_flags - scan request control flags + * + * Scan request control flags are used to control the handling + * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN + * requests. + * + * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and + * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only + * one of them can be used in the request. + * + * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority + * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning + * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured + * as AP and the beaconing has already been configured. This attribute is + * dangerous because will destroy stations performance as a lot of frames + * will be lost while scanning off-channel, therefore it must be used only + * when really needed + * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or + * for scheduled scan: a different one for every scan iteration). When the + * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and + * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only + * the masked bits will be preserved from the MAC address and the remainder + * randomised. If the attributes are not given full randomisation (46 bits, + * locally administered 1, multicast 0) is assumed. + * This flag must not be requested when the feature isn't supported, check + * the nl80211 feature flags for the device. + * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS + * request parameters IE in the probe request + * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses + * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at + * rate of at least 5.5M. In case non OCE AP is discovered in the channel, + * only the first probe req in the channel will be sent in high rate. + * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request + * tx deferral (dot11FILSProbeDelay shall be set to 15ms) + * and suppression (if it has received a broadcast Probe Response frame, + * Beacon frame or FILS Discovery frame from an AP that the STA considers + * a suitable candidate for (re-)association - suitable in terms of + * SSID and/or RSSI. + * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to + * accomplish the scan. Thus, this flag intends the driver to perform the + * scan request with lesser span/duration. It is specific to the driver + * implementations on how this is accomplished. Scan accuracy may get + * impacted with this flag. + * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume + * optimal possible power. Drivers can resort to their specific means to + * optimize the power. Scan accuracy may get impacted with this flag. + * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan + * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum + * possible scan results. This flag hints the driver to use the best + * possible scan configuration to improve the accuracy in scanning. + * Latency and power use may get impacted with this flag. + * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe + * request frames from this scan to avoid correlation/tracking being + * possible. + * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to + * only have supported rates and no additional capabilities (unless + * added by userspace explicitly.) + * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with + * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means + * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. + * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by + * 2.4/5 GHz APs + */ +enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, + NL80211_SCAN_FLAG_FLUSH = 1<<1, + NL80211_SCAN_FLAG_AP = 1<<2, + NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, + NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4, + NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, + NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, + NL80211_SCAN_FLAG_LOW_POWER = 1<<9, + NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, + NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, + NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, + NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, + NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14, +}; + +/** + * enum nl80211_acl_policy - access control policy + * + * Access control policy is applied on a MAC list set by + * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to + * be used with %NL80211_ATTR_ACL_POLICY. + * + * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are + * listed in ACL, i.e. allow all the stations which are not listed + * in ACL to authenticate. + * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed + * in ACL, i.e. deny all the stations which are not listed in ACL. + */ +enum nl80211_acl_policy { + NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, + NL80211_ACL_POLICY_DENY_UNLESS_LISTED, +}; + +/** + * enum nl80211_smps_mode - SMPS mode + * + * Requested SMPS mode (for AP mode) + * + * @NL80211_SMPS_OFF: SMPS off (use all antennas). + * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) + * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and + * turn on other antennas after CTS/RTS). + */ +enum nl80211_smps_mode { + NL80211_SMPS_OFF, + NL80211_SMPS_STATIC, + NL80211_SMPS_DYNAMIC, + + __NL80211_SMPS_AFTER_LAST, + NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_radar_event - type of radar event for DFS operation + * + * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace + * about detected radars or success of the channel available check (CAC) + * + * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is + * now unusable. + * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, + * the channel is now available. + * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. + * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this + * non-operating channel is expired and no longer valid. New CAC must + * be done on this channel before starting the operation. This is not + * applicable for ETSI dfs domain where pre-CAC is valid for ever. + * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, + * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. + */ +enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, + NL80211_RADAR_PRE_CAC_EXPIRED, + NL80211_RADAR_CAC_STARTED, +}; + +/** + * enum nl80211_dfs_state - DFS states for channels + * + * Channel states used by the DFS code. + * + * @NL80211_DFS_USABLE: The channel can be used, but channel availability + * check (CAC) must be performed before using it for AP or IBSS. + * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it + * is therefore marked as not available. + * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available. + */ +enum nl80211_dfs_state { + NL80211_DFS_USABLE, + NL80211_DFS_UNAVAILABLE, + NL80211_DFS_AVAILABLE, +}; + +/** + * enum nl80211_protocol_features - nl80211 protocol features + * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting + * wiphy dumps (if requested by the application with the attribute + * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the + * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or + * %NL80211_ATTR_WDEV. + */ +enum nl80211_protocol_features { + NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, +}; + +/** + * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers + * + * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified. + * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol. + * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol. + * @NL80211_CRIT_PROTO_APIPA: APIPA protocol. + * @NUM_NL80211_CRIT_PROTO: must be kept last. + */ +enum nl80211_crit_proto_id { + NL80211_CRIT_PROTO_UNSPEC, + NL80211_CRIT_PROTO_DHCP, + NL80211_CRIT_PROTO_EAPOL, + NL80211_CRIT_PROTO_APIPA, + /* add other protocols before this one */ + NUM_NL80211_CRIT_PROTO +}; + +/* maximum duration for critical protocol measures */ +#define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ + +/** + * enum nl80211_rxmgmt_flags - flags for received management frame. + * + * Used by cfg80211_rx_mgmt() + * + * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. + * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload + * the authentication. Exclusively defined for host drivers that + * advertises the SME functionality but would like the userspace + * to handle certain authentication algorithms (e.g. SAE). + */ +enum nl80211_rxmgmt_flags { + NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, + NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1, +}; + +/* + * If this flag is unset, the lower 24 bits are an OUI, if set + * a Linux nl80211 vendor ID is used (no such IDs are allocated + * yet, so that's not valid so far) + */ +#define NL80211_VENDOR_ID_IS_LINUX 0x80000000 + +/** + * struct nl80211_vendor_cmd_info - vendor command data + * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the + * value is a 24-bit OUI; if it is set then a separately allocated ID + * may be used, but no such IDs are allocated yet. New IDs should be + * added to this file when needed. + * @subcmd: sub-command ID for the command + */ +struct nl80211_vendor_cmd_info { + __u32 vendor_id; + __u32 subcmd; +}; + +/** + * enum nl80211_tdls_peer_capability - TDLS peer flags. + * + * Used by tdls_mgmt() to determine which conditional elements need + * to be added to TDLS Setup frames. + * + * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. + * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. + * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. + * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable. + */ +enum nl80211_tdls_peer_capability { + NL80211_TDLS_PEER_HT = 1<<0, + NL80211_TDLS_PEER_VHT = 1<<1, + NL80211_TDLS_PEER_WMM = 1<<2, + NL80211_TDLS_PEER_HE = 1<<3, +}; + +/** + * enum nl80211_sched_scan_plan - scanning plan for scheduled scan + * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In + * seconds (u32). + * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this + * scan plan (u32). The last scan plan must not specify this attribute + * because it will run infinitely. A value of zero is invalid as it will + * make the scan plan meaningless. + * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number + * currently defined + * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_plan { + __NL80211_SCHED_SCAN_PLAN_INVALID, + NL80211_SCHED_SCAN_PLAN_INTERVAL, + NL80211_SCHED_SCAN_PLAN_ITERATIONS, + + /* keep last */ + __NL80211_SCHED_SCAN_PLAN_AFTER_LAST, + NL80211_SCHED_SCAN_PLAN_MAX = + __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 +}; + +/** + * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. + * + * @band: band of BSS that must match for RSSI value adjustment. The value + * of this field is according to &enum nl80211_band. + * @delta: value used to adjust the RSSI value of matching BSS in dB. + */ +struct nl80211_bss_select_rssi_adjust { + __u8 band; + __s8 delta; +} __attribute__((packed)); + +/** + * enum nl80211_bss_select_attr - attributes for bss selection. + * + * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. + * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection + * is requested. + * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS + * selection should be done such that the specified band is preferred. + * When there are multiple BSS-es in the preferred band, the driver + * shall use RSSI-based BSS selection as a second step. The value of + * this attribute is according to &enum nl80211_band (u32). + * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for + * BSS-es in the specified band is to be adjusted before doing + * RSSI-based BSS selection. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. + * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. + * + * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT + * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour + * which the driver shall use. + */ +enum nl80211_bss_select_attr { + __NL80211_BSS_SELECT_ATTR_INVALID, + NL80211_BSS_SELECT_ATTR_RSSI, + NL80211_BSS_SELECT_ATTR_BAND_PREF, + NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, + + /* keep last */ + __NL80211_BSS_SELECT_ATTR_AFTER_LAST, + NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_nan_function_type - NAN function type + * + * Defines the function type of a NAN function + * + * @NL80211_NAN_FUNC_PUBLISH: function is publish + * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe + * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up + */ +enum nl80211_nan_function_type { + NL80211_NAN_FUNC_PUBLISH, + NL80211_NAN_FUNC_SUBSCRIBE, + NL80211_NAN_FUNC_FOLLOW_UP, + + /* keep last */ + __NL80211_NAN_FUNC_TYPE_AFTER_LAST, + NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1, +}; + +/** + * enum nl80211_nan_publish_type - NAN publish tx type + * + * Defines how to send publish Service Discovery Frames + * + * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited + * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited + */ +enum nl80211_nan_publish_type { + NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, + NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1, +}; + +/** + * enum nl80211_nan_func_term_reason - NAN functions termination reason + * + * Defines termination reasons of a NAN function + * + * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user + * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout + * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored + */ +enum nl80211_nan_func_term_reason { + NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, + NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, + NL80211_NAN_FUNC_TERM_REASON_ERROR, +}; + +#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6 +#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff +#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff + +/** + * enum nl80211_nan_func_attributes - NAN function attributes + * @__NL80211_NAN_FUNC_INVALID: invalid + * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8). + * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as + * specified in NAN spec. This is a binary attribute. + * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is + * publish. Defines the transmission type for the publish Service Discovery + * Frame, see &enum nl80211_nan_publish_type. Its type is u8. + * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited + * publish. Should the solicited publish Service Discovery Frame be sent to + * the NAN Broadcast address. This is a flag. + * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is + * subscribe. Is the subscribe active. This is a flag. + * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up. + * The instance ID for the follow up Service Discovery Frame. This is u8. + * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type + * is follow up. This is a u8. + * The requestor instance ID for the follow up Service Discovery Frame. + * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the + * follow up Service Discovery Frame. This is a binary attribute. + * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a + * close range. The range itself (RSSI) is defined by the device. + * This is a flag. + * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should + * stay active. If not present infinite TTL is assumed. This is a u32. + * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service + * specific info. This is a binary attribute. + * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute. + * See &enum nl80211_nan_srf_attributes. + * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested + * attribute. It is a list of binary values. + * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a + * nested attribute. It is a list of binary values. + * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function. + * Its type is u8 and it cannot be 0. + * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason. + * See &enum nl80211_nan_func_term_reason. + * + * @NUM_NL80211_NAN_FUNC_ATTR: internal + * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute + */ +enum nl80211_nan_func_attributes { + __NL80211_NAN_FUNC_INVALID, + NL80211_NAN_FUNC_TYPE, + NL80211_NAN_FUNC_SERVICE_ID, + NL80211_NAN_FUNC_PUBLISH_TYPE, + NL80211_NAN_FUNC_PUBLISH_BCAST, + NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, + NL80211_NAN_FUNC_FOLLOW_UP_ID, + NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, + NL80211_NAN_FUNC_FOLLOW_UP_DEST, + NL80211_NAN_FUNC_CLOSE_RANGE, + NL80211_NAN_FUNC_TTL, + NL80211_NAN_FUNC_SERVICE_INFO, + NL80211_NAN_FUNC_SRF, + NL80211_NAN_FUNC_RX_MATCH_FILTER, + NL80211_NAN_FUNC_TX_MATCH_FILTER, + NL80211_NAN_FUNC_INSTANCE_ID, + NL80211_NAN_FUNC_TERM_REASON, + + /* keep last */ + NUM_NL80211_NAN_FUNC_ATTR, + NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 +}; + +/** + * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes + * @__NL80211_NAN_SRF_INVALID: invalid + * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. + * This is a flag. + * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if + * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. + * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if + * %NL80211_NAN_SRF_BF is present. This is a u8. + * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if + * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested + * attribute. Each nested attribute is a MAC address. + * @NUM_NL80211_NAN_SRF_ATTR: internal + * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute + */ +enum nl80211_nan_srf_attributes { + __NL80211_NAN_SRF_INVALID, + NL80211_NAN_SRF_INCLUDE, + NL80211_NAN_SRF_BF, + NL80211_NAN_SRF_BF_IDX, + NL80211_NAN_SRF_MAC_ADDRS, + + /* keep last */ + NUM_NL80211_NAN_SRF_ATTR, + NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1, +}; + +/** + * enum nl80211_nan_match_attributes - NAN match attributes + * @__NL80211_NAN_MATCH_INVALID: invalid + * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the + * match. This is a nested attribute. + * See &enum nl80211_nan_func_attributes. + * @NL80211_NAN_MATCH_FUNC_PEER: the peer function + * that caused the match. This is a nested attribute. + * See &enum nl80211_nan_func_attributes. + * + * @NUM_NL80211_NAN_MATCH_ATTR: internal + * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute + */ +enum nl80211_nan_match_attributes { + __NL80211_NAN_MATCH_INVALID, + NL80211_NAN_MATCH_FUNC_LOCAL, + NL80211_NAN_MATCH_FUNC_PEER, + + /* keep last */ + NUM_NL80211_NAN_MATCH_ATTR, + NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 +}; + +/** + * nl80211_external_auth_action - Action to perform with external + * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. + * @NL80211_EXTERNAL_AUTH_START: Start the authentication. + * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. + */ +enum nl80211_external_auth_action { + NL80211_EXTERNAL_AUTH_START, + NL80211_EXTERNAL_AUTH_ABORT, +}; + +/** + * enum nl80211_ftm_responder_attributes - fine timing measurement + * responder attributes + * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid + * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled + * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element + * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), + * i.e. starting with the measurement token + * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element + * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), + * i.e. starting with the measurement token + * @__NL80211_FTM_RESP_ATTR_LAST: Internal + * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute. + */ +enum nl80211_ftm_responder_attributes { + __NL80211_FTM_RESP_ATTR_INVALID, + + NL80211_FTM_RESP_ATTR_ENABLED, + NL80211_FTM_RESP_ATTR_LCI, + NL80211_FTM_RESP_ATTR_CIVICLOC, + + /* keep last */ + __NL80211_FTM_RESP_ATTR_LAST, + NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1, +}; + +/* + * enum nl80211_ftm_responder_stats - FTM responder statistics + * + * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS + * when getting FTM responder statistics. + * + * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved + * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames + * were ssfully answered (u32) + * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the + * frames were successfully answered (u32) + * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32) + * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32) + * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32) + * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an + * indication of how much time the responder was busy (u64, msec) + * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers - + * triggers from initiators that didn't finish successfully the negotiation + * phase with the responder (u32) + * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests + * - initiator asks for a new scheduling although it already has scheduled + * FTM slot (u32) + * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of + * scheduled window (u32) + * @NL80211_FTM_STATS_PAD: used for padding, ignore + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute + */ +enum nl80211_ftm_responder_stats { + __NL80211_FTM_STATS_INVALID, + NL80211_FTM_STATS_SUCCESS_NUM, + NL80211_FTM_STATS_PARTIAL_NUM, + NL80211_FTM_STATS_FAILED_NUM, + NL80211_FTM_STATS_ASAP_NUM, + NL80211_FTM_STATS_NON_ASAP_NUM, + NL80211_FTM_STATS_TOTAL_DURATION_MSEC, + NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM, + NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM, + NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM, + NL80211_FTM_STATS_PAD, + + /* keep last */ + __NL80211_FTM_STATS_AFTER_LAST, + NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_preamble - frame preamble types + * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble + * @NL80211_PREAMBLE_HT: HT preamble + * @NL80211_PREAMBLE_VHT: VHT preamble + * @NL80211_PREAMBLE_DMG: DMG preamble + * @NL80211_PREAMBLE_HE: HE preamble + */ +enum nl80211_preamble { + NL80211_PREAMBLE_LEGACY, + NL80211_PREAMBLE_HT, + NL80211_PREAMBLE_VHT, + NL80211_PREAMBLE_DMG, + NL80211_PREAMBLE_HE, +}; + +/** + * enum nl80211_peer_measurement_type - peer measurement types + * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use + * these numbers also for attributes + * + * @NL80211_PMSR_TYPE_FTM: flight time measurement + * + * @NUM_NL80211_PMSR_TYPES: internal + * @NL80211_PMSR_TYPE_MAX: highest type number + */ +enum nl80211_peer_measurement_type { + NL80211_PMSR_TYPE_INVALID, + + NL80211_PMSR_TYPE_FTM, + + NUM_NL80211_PMSR_TYPES, + NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1 +}; + +/** + * enum nl80211_peer_measurement_status - peer measurement status + * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully + * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused + * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out + * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent + * reason may be available in the response data + */ +enum nl80211_peer_measurement_status { + NL80211_PMSR_STATUS_SUCCESS, + NL80211_PMSR_STATUS_REFUSED, + NL80211_PMSR_STATUS_TIMEOUT, + NL80211_PMSR_STATUS_FAILURE, +}; + +/** + * enum nl80211_peer_measurement_req - peer measurement request attributes + * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid + * + * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement + * type-specific request data inside. The attributes used are from the + * enums named nl80211_peer_measurement_<type>_req. + * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported + * (flag attribute) + * + * @NUM_NL80211_PMSR_REQ_ATTRS: internal + * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_req { + __NL80211_PMSR_REQ_ATTR_INVALID, + + NL80211_PMSR_REQ_ATTR_DATA, + NL80211_PMSR_REQ_ATTR_GET_AP_TSF, + + /* keep last */ + NUM_NL80211_PMSR_REQ_ATTRS, + NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1 +}; + +/** + * enum nl80211_peer_measurement_resp - peer measurement response attributes + * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid + * + * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement + * type-specific results inside. The attributes used are from the enums + * named nl80211_peer_measurement_<type>_resp. + * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status + * (using values from &enum nl80211_peer_measurement_status.) + * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the + * result was measured; this value is not expected to be accurate to + * more than 20ms. (u64, nanoseconds) + * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface + * doing the measurement is connected to when the result was measured. + * This shall be accurately reported if supported and requested + * (u64, usec) + * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially + * (*e.g. with FTM per-burst data) this flag will be cleared on all but + * the last result; if all results are combined it's set on the single + * result. + * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore + * + * @NUM_NL80211_PMSR_RESP_ATTRS: internal + * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_resp { + __NL80211_PMSR_RESP_ATTR_INVALID, + + NL80211_PMSR_RESP_ATTR_DATA, + NL80211_PMSR_RESP_ATTR_STATUS, + NL80211_PMSR_RESP_ATTR_HOST_TIME, + NL80211_PMSR_RESP_ATTR_AP_TSF, + NL80211_PMSR_RESP_ATTR_FINAL, + NL80211_PMSR_RESP_ATTR_PAD, + + /* keep last */ + NUM_NL80211_PMSR_RESP_ATTRS, + NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 +}; + +/** + * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement + * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid + * + * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address + * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level + * attributes like %NL80211_ATTR_WIPHY_FREQ etc. + * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by + * measurement type, with attributes from the + * &enum nl80211_peer_measurement_req inside. + * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by + * measurement type, with attributes from the + * &enum nl80211_peer_measurement_resp inside. + * + * @NUM_NL80211_PMSR_PEER_ATTRS: internal + * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_peer_attrs { + __NL80211_PMSR_PEER_ATTR_INVALID, + + NL80211_PMSR_PEER_ATTR_ADDR, + NL80211_PMSR_PEER_ATTR_CHAN, + NL80211_PMSR_PEER_ATTR_REQ, + NL80211_PMSR_PEER_ATTR_RESP, + + /* keep last */ + NUM_NL80211_PMSR_PEER_ATTRS, + NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1, +}; + +/** + * enum nl80211_peer_measurement_attrs - peer measurement attributes + * @__NL80211_PMSR_ATTR_INVALID: invalid + * + * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability + * advertisement only, indicates the maximum number of peers + * measurements can be done with in a single request + * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability + * indicating that the connected AP's TSF can be reported in + * measurement results + * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability + * indicating that MAC address randomization is supported. + * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device, + * this contains a nesting indexed by measurement type, and + * type-specific capabilities inside, which are from the enums + * named nl80211_peer_measurement_<type>_capa. + * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is + * meaningless, just a list of peers to measure with, with the + * sub-attributes taken from + * &enum nl80211_peer_measurement_peer_attrs. + * + * @NUM_NL80211_PMSR_ATTR: internal + * @NL80211_PMSR_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_attrs { + __NL80211_PMSR_ATTR_INVALID, + + NL80211_PMSR_ATTR_MAX_PEERS, + NL80211_PMSR_ATTR_REPORT_AP_TSF, + NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, + NL80211_PMSR_ATTR_TYPE_CAPA, + NL80211_PMSR_ATTR_PEERS, + + /* keep last */ + NUM_NL80211_PMSR_ATTR, + NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_capa - FTM capabilities + * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode + * is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP + * mode is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI + * data can be requested during the measurement + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic + * location data can be requested during the measurement + * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits + * from &enum nl80211_preamble. + * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from + * &enum nl80211_chan_width indicating the supported channel + * bandwidths for FTM. Note that a higher channel bandwidth may be + * configured to allow for other measurements types with different + * bandwidth requirement in the same measurement. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating + * the maximum bursts exponent that can be used (if not present anything + * is valid) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating + * the maximum FTMs per burst (if not present anything is valid) + * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if + * trigger based ranging measurement is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating + * if non trigger based ranging measurement is supported + * + * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_capa { + __NL80211_PMSR_FTM_CAPA_ATTR_INVALID, + + NL80211_PMSR_FTM_CAPA_ATTR_ASAP, + NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP, + NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI, + NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC, + NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES, + NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, + NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, + NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, + + /* keep last */ + NUM_NL80211_PMSR_FTM_CAPA_ATTR, + NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_req - FTM request attributes + * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see + * &enum nl80211_preamble), optional for DMG (u32) + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in + * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" + * (u8, 0-15, optional with default 15 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units + * of 100ms (u16, optional with default 0) + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 + * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with + * default 15 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames + * requested per burst + * (u8, 0-31, optional with default 0 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries + * (u8, default 3) + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data + * (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging + * measurement (flag). + * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are + * mutually exclusive. + * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based + * ranging will be used. + * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based + * ranging measurement (flag) + * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are + * mutually exclusive. + * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based + * ranging will be used. + * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only + * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the + * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED + * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. + * + * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal + * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_req { + __NL80211_PMSR_FTM_REQ_ATTR_INVALID, + + NL80211_PMSR_FTM_REQ_ATTR_ASAP, + NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE, + NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP, + NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD, + NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION, + NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST, + NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, + NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, + NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, + NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, + NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, + + /* keep last */ + NUM_NL80211_PMSR_FTM_REQ_ATTR, + NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons + * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used + * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder + * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement + * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is + * on a different channel, so can't measure (if we didn't know, we'd + * try and get no response) + * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM + * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps + * received + * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry + * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME) + * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed + * by the peer and are no longer supported + */ +enum nl80211_peer_measurement_ftm_failure_reasons { + NL80211_PMSR_FTM_FAILURE_UNSPECIFIED, + NL80211_PMSR_FTM_FAILURE_NO_RESPONSE, + NL80211_PMSR_FTM_FAILURE_REJECTED, + NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL, + NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE, + NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP, + NL80211_PMSR_FTM_FAILURE_PEER_BUSY, + NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS, +}; + +/** + * enum nl80211_peer_measurement_ftm_resp - FTM response attributes + * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported + * as separate results then it will be the burst index 0...(N-1) and + * the top level will indicate partial results (u32) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames + * transmitted (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames + * that were acknowleged (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the + * busy peer (u32, seconds) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent + * used by the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by + * the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used + * by the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action + * frames (optional, s32, 1/2 dBm) + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action + * frames (optional, s32, 1/2 dBm) + * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the + * FTM action frame (optional, nested, using &enum nl80211_rate_info + * attributes) + * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM + * action frame (optional, nested, using &enum nl80211_rate_info attrs) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional + * but one of RTT/DIST must be present) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that + * standard deviation is the square root of variance, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds, + * optional) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional + * but one of RTT/DIST must be present) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note + * that standard deviation is the square root of variance, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional); + * this is the contents of the Measurement Report Element (802.11-2016 + * 9.4.2.22.1) starting with the Measurement Token, with Measurement + * Type 8. + * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer + * (binary, optional); + * this is the contents of the Measurement Report Element (802.11-2016 + * 9.4.2.22.1) starting with the Measurement Token, with Measurement + * Type 11. + * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only + * + * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal + * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_resp { + __NL80211_PMSR_FTM_RESP_ATTR_INVALID, + + NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON, + NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX, + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES, + NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME, + NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP, + NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION, + NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST, + NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG, + NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_TX_RATE, + NL80211_PMSR_FTM_RESP_ATTR_RX_RATE, + NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG, + NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE, + NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG, + NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE, + NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_LCI, + NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, + NL80211_PMSR_FTM_RESP_ATTR_PAD, + + /* keep last */ + NUM_NL80211_PMSR_FTM_RESP_ATTR, + NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 +}; + +/** + * enum nl80211_obss_pd_attributes - OBSS packet detection attributes + * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid + * + * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum + * tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color + * values used by members of the SRG. + * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial + * BSSID values used by members of the SRG. + * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element. + * + * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal + * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. + */ +enum nl80211_obss_pd_attributes { + __NL80211_HE_OBSS_PD_ATTR_INVALID, + + NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, + NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, + NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET, + NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP, + NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP, + NL80211_HE_OBSS_PD_ATTR_SR_CTRL, + + /* keep last */ + __NL80211_HE_OBSS_PD_ATTR_LAST, + NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, +}; + +/** + * enum nl80211_bss_color_attributes - BSS Color attributes + * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid + * + * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. + * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. + * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. + * + * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal + * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. + */ +enum nl80211_bss_color_attributes { + __NL80211_HE_BSS_COLOR_ATTR_INVALID, + + NL80211_HE_BSS_COLOR_ATTR_COLOR, + NL80211_HE_BSS_COLOR_ATTR_DISABLED, + NL80211_HE_BSS_COLOR_ATTR_PARTIAL, + + /* keep last */ + __NL80211_HE_BSS_COLOR_ATTR_LAST, + NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, +}; + +/** + * enum nl80211_iftype_akm_attributes - interface type AKM attributes + * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid + * + * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag + * attribute for each interface type that supports AKM suites specified in + * %NL80211_IFTYPE_AKM_ATTR_SUITES + * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported + * AKM suites for the specified interface types. + * + * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal + * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. + */ +enum nl80211_iftype_akm_attributes { + __NL80211_IFTYPE_AKM_ATTR_INVALID, + + NL80211_IFTYPE_AKM_ATTR_IFTYPES, + NL80211_IFTYPE_AKM_ATTR_SUITES, + + /* keep last */ + __NL80211_IFTYPE_AKM_ATTR_LAST, + NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, +}; + +/** + * enum nl80211_fils_discovery_attributes - FILS discovery configuration + * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail. + * + * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid + * + * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU). + * Allowed range: 0..10000 (TU = Time Unit) + * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU). + * Allowed range: 0..10000 (TU = Time Unit) + * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action + * frame including the headers. + * + * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal + * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute + */ +enum nl80211_fils_discovery_attributes { + __NL80211_FILS_DISCOVERY_ATTR_INVALID, + + NL80211_FILS_DISCOVERY_ATTR_INT_MIN, + NL80211_FILS_DISCOVERY_ATTR_INT_MAX, + NL80211_FILS_DISCOVERY_ATTR_TMPL, + + /* keep last */ + __NL80211_FILS_DISCOVERY_ATTR_LAST, + NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1 +}; + +/* + * FILS discovery template minimum length with action frame headers and + * mandatory fields. + */ +#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42 + +/** + * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe + * response configuration. Applicable only in 6GHz. + * + * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid + * + * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU). + * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0 + * 26.17.2.3.2 (AP behavior for fast passive scanning). + * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response + * frame template (binary). + * + * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal + * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute + */ +enum nl80211_unsol_bcast_probe_resp_attributes { + __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID, + + NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT, + NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL, + + /* keep last */ + __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST, + NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = + __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 +}; + +/** + * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE + * derivation. Applicable only when WPA3-Personal SAE authentication is + * used. + * + * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that + * attribute is not present from userspace. + * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only + * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only + * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element + * can be used. + */ +enum nl80211_sae_pwe_mechanism { + NL80211_SAE_PWE_UNSPECIFIED, + NL80211_SAE_PWE_HUNT_AND_PECK, + NL80211_SAE_PWE_HASH_TO_ELEMENT, + NL80211_SAE_PWE_BOTH, +}; + +/** + * enum nl80211_sar_type - type of SAR specs + * + * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit + * + */ +enum nl80211_sar_type { + NL80211_SAR_TYPE_POWER, + + /* add new type here */ + + /* Keep last */ + NUM_NL80211_SAR_TYPE, +}; + +/** + * enum nl80211_sar_attrs - Attributes for SAR spec + * + * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. + * + * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power + * limit specifications. Each specification contains a set + * of %nl80211_sar_specs_attrs. + * + * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER + * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. + * + * For sar_capa dump, it contains array of + * %NL80211_SAR_ATTR_SPECS_START_FREQ + * and %NL80211_SAR_ATTR_SPECS_END_FREQ. + * + * @__NL80211_SAR_ATTR_LAST: Internal + * @NL80211_SAR_ATTR_MAX: highest sar attribute + * + * These attributes are used with %NL80211_CMD_SET_SAR_SPEC + */ +enum nl80211_sar_attrs { + __NL80211_SAR_ATTR_INVALID, + + NL80211_SAR_ATTR_TYPE, + NL80211_SAR_ATTR_SPECS, + + __NL80211_SAR_ATTR_LAST, + NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, +}; + +/** + * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs + * + * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual + * power limit value in units of 0.25 dBm if type is + * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). + * 0 means userspace doesn't have SAR limitation on this associated range. + * + * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the + * index of exported freq range table and the associated power limitation + * is applied to this range. + * + * Userspace isn't required to set all the ranges advertised by WLAN driver, + * and userspace can skip some certain ranges. These skipped ranges don't + * have SAR limitations, and they are same as setting the + * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any + * value higher than regulatory allowed value just means SAR power + * limitation is removed, but it's required to set at least one range. + * It's not allowed to set duplicated range in one SET operation. + * + * Every SET operation overwrites previous SET operation. + * + * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end + * frequency of this range edge when registering SAR capability to wiphy. + * It's not a channel center frequency. The unit is kHz. + * + * @__NL80211_SAR_ATTR_SPECS_LAST: Internal + * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute + */ +enum nl80211_sar_specs_attrs { + __NL80211_SAR_ATTR_SPECS_INVALID, + + NL80211_SAR_ATTR_SPECS_POWER, + NL80211_SAR_ATTR_SPECS_RANGE_INDEX, + NL80211_SAR_ATTR_SPECS_START_FREQ, + NL80211_SAR_ATTR_SPECS_END_FREQ, + + __NL80211_SAR_ATTR_SPECS_LAST, + NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, +}; + +/** + * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced + * multi-BSSID advertisements (EMA) in AP mode. + * Kernel uses some of these attributes to advertise driver's support for + * MBSSID and EMA. + * Remaining attributes should be used by the userspace to configure the + * features. + * + * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid + * + * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise + * the maximum number of MBSSID interfaces supported by the driver. + * Driver should indicate MBSSID support by setting + * wiphy->mbssid_max_interfaces to a value more than or equal to 2. + * + * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel + * to advertise the maximum profile periodicity supported by the driver + * if EMA is enabled. Driver should indicate EMA support to the userspace + * by setting wiphy->ema_max_profile_periodicity to + * a non-zero value. + * + * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of + * this BSS (u8) in the multiple BSSID set. + * Value must be set to 0 for the transmitting interface and non-zero for + * all non-transmitting interfaces. The userspace will be responsible + * for using unique indices for the interfaces. + * Range: 0 to wiphy->mbssid_max_interfaces-1. + * + * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for + * a non-transmitted profile which provides the interface index (u32) of + * the transmitted profile. The value must match one of the interface + * indices advertised by the kernel. Optional if the interface being set up + * is the transmitting one, however, if provided then the value must match + * the interface index of the same. + * + * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature. + * Setting this flag is permitted only if the driver advertises EMA support + * by setting wiphy->ema_max_profile_periodicity to non-zero. + * + * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal + * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute + */ +enum nl80211_mbssid_config_attributes { + __NL80211_MBSSID_CONFIG_ATTR_INVALID, + + NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES, + NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY, + NL80211_MBSSID_CONFIG_ATTR_INDEX, + NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, + NL80211_MBSSID_CONFIG_ATTR_EMA, + + /* keep last */ + __NL80211_MBSSID_CONFIG_ATTR_LAST, + NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1, +}; + +/** + * enum nl80211_ap_settings_flags - AP settings flags + * + * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external + * authentication. + * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query + * procedures offload to driver. If driver advertises + * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall + * ignore SA Query procedures and validations when this flag is set by + * userspace. + */ +enum nl80211_ap_settings_flags { + NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0, + NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, +}; + +#endif /* __LINUX_NL80211_H */ diff --git a/src/basic/linux/pkt_sched.h b/src/basic/linux/pkt_sched.h new file mode 100644 index 0000000..000eec1 --- /dev/null +++ b/src/basic/linux/pkt_sched.h @@ -0,0 +1,1281 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_PKT_SCHED_H +#define __LINUX_PKT_SCHED_H + +#include <linux/const.h> +#include <linux/types.h> + +/* Logical priority bands not depending on specific packet scheduler. + Every scheduler will map them to real traffic classes, if it has + no more precise mechanism to classify packets. + + These numbers have no special meaning, though their coincidence + with obsolete IPv6 values is not occasional :-). New IPv6 drafts + preferred full anarchy inspired by diffserv group. + + Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy + class, actually, as rule it will be handled with more care than + filler or even bulk. + */ + +#define TC_PRIO_BESTEFFORT 0 +#define TC_PRIO_FILLER 1 +#define TC_PRIO_BULK 2 +#define TC_PRIO_INTERACTIVE_BULK 4 +#define TC_PRIO_INTERACTIVE 6 +#define TC_PRIO_CONTROL 7 + +#define TC_PRIO_MAX 15 + +/* Generic queue statistics, available for all the elements. + Particular schedulers may have also their private records. + */ + +struct tc_stats { + __u64 bytes; /* Number of enqueued bytes */ + __u32 packets; /* Number of enqueued packets */ + __u32 drops; /* Packets dropped because of lack of resources */ + __u32 overlimits; /* Number of throttle events when this + * flow goes out of allocated bandwidth */ + __u32 bps; /* Current flow byte rate */ + __u32 pps; /* Current flow packet rate */ + __u32 qlen; + __u32 backlog; +}; + +struct tc_estimator { + signed char interval; + unsigned char ewma_log; +}; + +/* "Handles" + --------- + + All the traffic control objects have 32bit identifiers, or "handles". + + They can be considered as opaque numbers from user API viewpoint, + but actually they always consist of two fields: major and + minor numbers, which are interpreted by kernel specially, + that may be used by applications, though not recommended. + + F.e. qdisc handles always have minor number equal to zero, + classes (or flows) have major equal to parent qdisc major, and + minor uniquely identifying class inside qdisc. + + Macros to manipulate handles: + */ + +#define TC_H_MAJ_MASK (0xFFFF0000U) +#define TC_H_MIN_MASK (0x0000FFFFU) +#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK) +#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK) +#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK)) + +#define TC_H_UNSPEC (0U) +#define TC_H_ROOT (0xFFFFFFFFU) +#define TC_H_INGRESS (0xFFFFFFF1U) +#define TC_H_CLSACT TC_H_INGRESS + +#define TC_H_MIN_PRIORITY 0xFFE0U +#define TC_H_MIN_INGRESS 0xFFF2U +#define TC_H_MIN_EGRESS 0xFFF3U + +/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */ +enum tc_link_layer { + TC_LINKLAYER_UNAWARE, /* Indicate unaware old iproute2 util */ + TC_LINKLAYER_ETHERNET, + TC_LINKLAYER_ATM, +}; +#define TC_LINKLAYER_MASK 0x0F /* limit use to lower 4 bits */ + +struct tc_ratespec { + unsigned char cell_log; + __u8 linklayer; /* lower 4 bits */ + unsigned short overhead; + short cell_align; + unsigned short mpu; + __u32 rate; +}; + +#define TC_RTAB_SIZE 1024 + +struct tc_sizespec { + unsigned char cell_log; + unsigned char size_log; + short cell_align; + int overhead; + unsigned int linklayer; + unsigned int mpu; + unsigned int mtu; + unsigned int tsize; +}; + +enum { + TCA_STAB_UNSPEC, + TCA_STAB_BASE, + TCA_STAB_DATA, + __TCA_STAB_MAX +}; + +#define TCA_STAB_MAX (__TCA_STAB_MAX - 1) + +/* FIFO section */ + +struct tc_fifo_qopt { + __u32 limit; /* Queue length: bytes for bfifo, packets for pfifo */ +}; + +/* SKBPRIO section */ + +/* + * Priorities go from zero to (SKBPRIO_MAX_PRIORITY - 1). + * SKBPRIO_MAX_PRIORITY should be at least 64 in order for skbprio to be able + * to map one to one the DS field of IPV4 and IPV6 headers. + * Memory allocation grows linearly with SKBPRIO_MAX_PRIORITY. + */ + +#define SKBPRIO_MAX_PRIORITY 64 + +struct tc_skbprio_qopt { + __u32 limit; /* Queue length in packets. */ +}; + +/* PRIO section */ + +#define TCQ_PRIO_BANDS 16 +#define TCQ_MIN_PRIO_BANDS 2 + +struct tc_prio_qopt { + int bands; /* Number of bands */ + __u8 priomap[TC_PRIO_MAX+1]; /* Map: logical priority -> PRIO band */ +}; + +/* MULTIQ section */ + +struct tc_multiq_qopt { + __u16 bands; /* Number of bands */ + __u16 max_bands; /* Maximum number of queues */ +}; + +/* PLUG section */ + +#define TCQ_PLUG_BUFFER 0 +#define TCQ_PLUG_RELEASE_ONE 1 +#define TCQ_PLUG_RELEASE_INDEFINITE 2 +#define TCQ_PLUG_LIMIT 3 + +struct tc_plug_qopt { + /* TCQ_PLUG_BUFFER: Inset a plug into the queue and + * buffer any incoming packets + * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head + * to beginning of the next plug. + * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue. + * Stop buffering packets until the next TCQ_PLUG_BUFFER + * command is received (just act as a pass-thru queue). + * TCQ_PLUG_LIMIT: Increase/decrease queue size + */ + int action; + __u32 limit; +}; + +/* TBF section */ + +struct tc_tbf_qopt { + struct tc_ratespec rate; + struct tc_ratespec peakrate; + __u32 limit; + __u32 buffer; + __u32 mtu; +}; + +enum { + TCA_TBF_UNSPEC, + TCA_TBF_PARMS, + TCA_TBF_RTAB, + TCA_TBF_PTAB, + TCA_TBF_RATE64, + TCA_TBF_PRATE64, + TCA_TBF_BURST, + TCA_TBF_PBURST, + TCA_TBF_PAD, + __TCA_TBF_MAX, +}; + +#define TCA_TBF_MAX (__TCA_TBF_MAX - 1) + + +/* TEQL section */ + +/* TEQL does not require any parameters */ + +/* SFQ section */ + +struct tc_sfq_qopt { + unsigned quantum; /* Bytes per round allocated to flow */ + int perturb_period; /* Period of hash perturbation */ + __u32 limit; /* Maximal packets in queue */ + unsigned divisor; /* Hash divisor */ + unsigned flows; /* Maximal number of flows */ +}; + +struct tc_sfqred_stats { + __u32 prob_drop; /* Early drops, below max threshold */ + __u32 forced_drop; /* Early drops, after max threshold */ + __u32 prob_mark; /* Marked packets, below max threshold */ + __u32 forced_mark; /* Marked packets, after max threshold */ + __u32 prob_mark_head; /* Marked packets, below max threshold */ + __u32 forced_mark_head;/* Marked packets, after max threshold */ +}; + +struct tc_sfq_qopt_v1 { + struct tc_sfq_qopt v0; + unsigned int depth; /* max number of packets per flow */ + unsigned int headdrop; +/* SFQRED parameters */ + __u32 limit; /* HARD maximal flow queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; + __u32 max_P; /* probability, high resolution */ +/* SFQRED stats */ + struct tc_sfqred_stats stats; +}; + + +struct tc_sfq_xstats { + __s32 allot; +}; + +/* RED section */ + +enum { + TCA_RED_UNSPEC, + TCA_RED_PARMS, + TCA_RED_STAB, + TCA_RED_MAX_P, + TCA_RED_FLAGS, /* bitfield32 */ + TCA_RED_EARLY_DROP_BLOCK, /* u32 */ + TCA_RED_MARK_BLOCK, /* u32 */ + __TCA_RED_MAX, +}; + +#define TCA_RED_MAX (__TCA_RED_MAX - 1) + +struct tc_red_qopt { + __u32 limit; /* HARD maximal queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + + /* This field can be used for flags that a RED-like qdisc has + * historically supported. E.g. when configuring RED, it can be used for + * ECN, HARDDROP and ADAPTATIVE. For SFQ it can be used for ECN, + * HARDDROP. Etc. Because this field has not been validated, and is + * copied back on dump, any bits besides those to which a given qdisc + * has assigned a historical meaning need to be considered for free use + * by userspace tools. + * + * Any further flags need to be passed differently, e.g. through an + * attribute (such as TCA_RED_FLAGS above). Such attribute should allow + * passing both recent and historic flags in one value. + */ + unsigned char flags; +#define TC_RED_ECN 1 +#define TC_RED_HARDDROP 2 +#define TC_RED_ADAPTATIVE 4 +#define TC_RED_NODROP 8 +}; + +#define TC_RED_HISTORIC_FLAGS (TC_RED_ECN | TC_RED_HARDDROP | TC_RED_ADAPTATIVE) + +struct tc_red_xstats { + __u32 early; /* Early drops */ + __u32 pdrop; /* Drops due to queue limits */ + __u32 other; /* Drops due to drop() calls */ + __u32 marked; /* Marked packets */ +}; + +/* GRED section */ + +#define MAX_DPs 16 + +enum { + TCA_GRED_UNSPEC, + TCA_GRED_PARMS, + TCA_GRED_STAB, + TCA_GRED_DPS, + TCA_GRED_MAX_P, + TCA_GRED_LIMIT, + TCA_GRED_VQ_LIST, /* nested TCA_GRED_VQ_ENTRY */ + __TCA_GRED_MAX, +}; + +#define TCA_GRED_MAX (__TCA_GRED_MAX - 1) + +enum { + TCA_GRED_VQ_ENTRY_UNSPEC, + TCA_GRED_VQ_ENTRY, /* nested TCA_GRED_VQ_* */ + __TCA_GRED_VQ_ENTRY_MAX, +}; +#define TCA_GRED_VQ_ENTRY_MAX (__TCA_GRED_VQ_ENTRY_MAX - 1) + +enum { + TCA_GRED_VQ_UNSPEC, + TCA_GRED_VQ_PAD, + TCA_GRED_VQ_DP, /* u32 */ + TCA_GRED_VQ_STAT_BYTES, /* u64 */ + TCA_GRED_VQ_STAT_PACKETS, /* u32 */ + TCA_GRED_VQ_STAT_BACKLOG, /* u32 */ + TCA_GRED_VQ_STAT_PROB_DROP, /* u32 */ + TCA_GRED_VQ_STAT_PROB_MARK, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_DROP, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_MARK, /* u32 */ + TCA_GRED_VQ_STAT_PDROP, /* u32 */ + TCA_GRED_VQ_STAT_OTHER, /* u32 */ + TCA_GRED_VQ_FLAGS, /* u32 */ + __TCA_GRED_VQ_MAX +}; + +#define TCA_GRED_VQ_MAX (__TCA_GRED_VQ_MAX - 1) + +struct tc_gred_qopt { + __u32 limit; /* HARD maximal queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + __u32 DP; /* up to 2^32 DPs */ + __u32 backlog; + __u32 qave; + __u32 forced; + __u32 early; + __u32 other; + __u32 pdrop; + __u8 Wlog; /* log(W) */ + __u8 Plog; /* log(P_max/(qth_max-qth_min)) */ + __u8 Scell_log; /* cell size for idle damping */ + __u8 prio; /* prio of this VQ */ + __u32 packets; + __u32 bytesin; +}; + +/* gred setup */ +struct tc_gred_sopt { + __u32 DPs; + __u32 def_DP; + __u8 grio; + __u8 flags; + __u16 pad1; +}; + +/* CHOKe section */ + +enum { + TCA_CHOKE_UNSPEC, + TCA_CHOKE_PARMS, + TCA_CHOKE_STAB, + TCA_CHOKE_MAX_P, + __TCA_CHOKE_MAX, +}; + +#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1) + +struct tc_choke_qopt { + __u32 limit; /* Hard queue length (packets) */ + __u32 qth_min; /* Min average threshold (packets) */ + __u32 qth_max; /* Max average threshold (packets) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; /* see RED flags */ +}; + +struct tc_choke_xstats { + __u32 early; /* Early drops */ + __u32 pdrop; /* Drops due to queue limits */ + __u32 other; /* Drops due to drop() calls */ + __u32 marked; /* Marked packets */ + __u32 matched; /* Drops due to flow match */ +}; + +/* HTB section */ +#define TC_HTB_NUMPRIO 8 +#define TC_HTB_MAXDEPTH 8 +#define TC_HTB_PROTOVER 3 /* the same as HTB and TC's major */ + +struct tc_htb_opt { + struct tc_ratespec rate; + struct tc_ratespec ceil; + __u32 buffer; + __u32 cbuffer; + __u32 quantum; + __u32 level; /* out only */ + __u32 prio; +}; +struct tc_htb_glob { + __u32 version; /* to match HTB/TC */ + __u32 rate2quantum; /* bps->quantum divisor */ + __u32 defcls; /* default class number */ + __u32 debug; /* debug flags */ + + /* stats */ + __u32 direct_pkts; /* count of non shaped packets */ +}; +enum { + TCA_HTB_UNSPEC, + TCA_HTB_PARMS, + TCA_HTB_INIT, + TCA_HTB_CTAB, + TCA_HTB_RTAB, + TCA_HTB_DIRECT_QLEN, + TCA_HTB_RATE64, + TCA_HTB_CEIL64, + TCA_HTB_PAD, + TCA_HTB_OFFLOAD, + __TCA_HTB_MAX, +}; + +#define TCA_HTB_MAX (__TCA_HTB_MAX - 1) + +struct tc_htb_xstats { + __u32 lends; + __u32 borrows; + __u32 giants; /* unused since 'Make HTB scheduler work with TSO.' */ + __s32 tokens; + __s32 ctokens; +}; + +/* HFSC section */ + +struct tc_hfsc_qopt { + __u16 defcls; /* default class */ +}; + +struct tc_service_curve { + __u32 m1; /* slope of the first segment in bps */ + __u32 d; /* x-projection of the first segment in us */ + __u32 m2; /* slope of the second segment in bps */ +}; + +struct tc_hfsc_stats { + __u64 work; /* total work done */ + __u64 rtwork; /* work done by real-time criteria */ + __u32 period; /* current period */ + __u32 level; /* class level in hierarchy */ +}; + +enum { + TCA_HFSC_UNSPEC, + TCA_HFSC_RSC, + TCA_HFSC_FSC, + TCA_HFSC_USC, + __TCA_HFSC_MAX, +}; + +#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1) + + +/* CBQ section */ + +#define TC_CBQ_MAXPRIO 8 +#define TC_CBQ_MAXLEVEL 8 +#define TC_CBQ_DEF_EWMA 5 + +struct tc_cbq_lssopt { + unsigned char change; + unsigned char flags; +#define TCF_CBQ_LSS_BOUNDED 1 +#define TCF_CBQ_LSS_ISOLATED 2 + unsigned char ewma_log; + unsigned char level; +#define TCF_CBQ_LSS_FLAGS 1 +#define TCF_CBQ_LSS_EWMA 2 +#define TCF_CBQ_LSS_MAXIDLE 4 +#define TCF_CBQ_LSS_MINIDLE 8 +#define TCF_CBQ_LSS_OFFTIME 0x10 +#define TCF_CBQ_LSS_AVPKT 0x20 + __u32 maxidle; + __u32 minidle; + __u32 offtime; + __u32 avpkt; +}; + +struct tc_cbq_wrropt { + unsigned char flags; + unsigned char priority; + unsigned char cpriority; + unsigned char __reserved; + __u32 allot; + __u32 weight; +}; + +struct tc_cbq_ovl { + unsigned char strategy; +#define TC_CBQ_OVL_CLASSIC 0 +#define TC_CBQ_OVL_DELAY 1 +#define TC_CBQ_OVL_LOWPRIO 2 +#define TC_CBQ_OVL_DROP 3 +#define TC_CBQ_OVL_RCLASSIC 4 + unsigned char priority2; + __u16 pad; + __u32 penalty; +}; + +struct tc_cbq_police { + unsigned char police; + unsigned char __res1; + unsigned short __res2; +}; + +struct tc_cbq_fopt { + __u32 split; + __u32 defmap; + __u32 defchange; +}; + +struct tc_cbq_xstats { + __u32 borrows; + __u32 overactions; + __s32 avgidle; + __s32 undertime; +}; + +enum { + TCA_CBQ_UNSPEC, + TCA_CBQ_LSSOPT, + TCA_CBQ_WRROPT, + TCA_CBQ_FOPT, + TCA_CBQ_OVL_STRATEGY, + TCA_CBQ_RATE, + TCA_CBQ_RTAB, + TCA_CBQ_POLICE, + __TCA_CBQ_MAX, +}; + +#define TCA_CBQ_MAX (__TCA_CBQ_MAX - 1) + +/* dsmark section */ + +enum { + TCA_DSMARK_UNSPEC, + TCA_DSMARK_INDICES, + TCA_DSMARK_DEFAULT_INDEX, + TCA_DSMARK_SET_TC_INDEX, + TCA_DSMARK_MASK, + TCA_DSMARK_VALUE, + __TCA_DSMARK_MAX, +}; + +#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1) + +/* ATM section */ + +enum { + TCA_ATM_UNSPEC, + TCA_ATM_FD, /* file/socket descriptor */ + TCA_ATM_PTR, /* pointer to descriptor - later */ + TCA_ATM_HDR, /* LL header */ + TCA_ATM_EXCESS, /* excess traffic class (0 for CLP) */ + TCA_ATM_ADDR, /* PVC address (for output only) */ + TCA_ATM_STATE, /* VC state (ATM_VS_*; for output only) */ + __TCA_ATM_MAX, +}; + +#define TCA_ATM_MAX (__TCA_ATM_MAX - 1) + +/* Network emulator */ + +enum { + TCA_NETEM_UNSPEC, + TCA_NETEM_CORR, + TCA_NETEM_DELAY_DIST, + TCA_NETEM_REORDER, + TCA_NETEM_CORRUPT, + TCA_NETEM_LOSS, + TCA_NETEM_RATE, + TCA_NETEM_ECN, + TCA_NETEM_RATE64, + TCA_NETEM_PAD, + TCA_NETEM_LATENCY64, + TCA_NETEM_JITTER64, + TCA_NETEM_SLOT, + TCA_NETEM_SLOT_DIST, + __TCA_NETEM_MAX, +}; + +#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1) + +struct tc_netem_qopt { + __u32 latency; /* added delay (us) */ + __u32 limit; /* fifo limit (packets) */ + __u32 loss; /* random packet loss (0=none ~0=100%) */ + __u32 gap; /* re-ordering gap (0 for none) */ + __u32 duplicate; /* random packet dup (0=none ~0=100%) */ + __u32 jitter; /* random jitter in latency (us) */ +}; + +struct tc_netem_corr { + __u32 delay_corr; /* delay correlation */ + __u32 loss_corr; /* packet loss correlation */ + __u32 dup_corr; /* duplicate correlation */ +}; + +struct tc_netem_reorder { + __u32 probability; + __u32 correlation; +}; + +struct tc_netem_corrupt { + __u32 probability; + __u32 correlation; +}; + +struct tc_netem_rate { + __u32 rate; /* byte/s */ + __s32 packet_overhead; + __u32 cell_size; + __s32 cell_overhead; +}; + +struct tc_netem_slot { + __s64 min_delay; /* nsec */ + __s64 max_delay; + __s32 max_packets; + __s32 max_bytes; + __s64 dist_delay; /* nsec */ + __s64 dist_jitter; /* nsec */ +}; + +enum { + NETEM_LOSS_UNSPEC, + NETEM_LOSS_GI, /* General Intuitive - 4 state model */ + NETEM_LOSS_GE, /* Gilbert Elliot models */ + __NETEM_LOSS_MAX +}; +#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1) + +/* State transition probabilities for 4 state model */ +struct tc_netem_gimodel { + __u32 p13; + __u32 p31; + __u32 p32; + __u32 p14; + __u32 p23; +}; + +/* Gilbert-Elliot models */ +struct tc_netem_gemodel { + __u32 p; + __u32 r; + __u32 h; + __u32 k1; +}; + +#define NETEM_DIST_SCALE 8192 +#define NETEM_DIST_MAX 16384 + +/* DRR */ + +enum { + TCA_DRR_UNSPEC, + TCA_DRR_QUANTUM, + __TCA_DRR_MAX +}; + +#define TCA_DRR_MAX (__TCA_DRR_MAX - 1) + +struct tc_drr_stats { + __u32 deficit; +}; + +/* MQPRIO */ +#define TC_QOPT_BITMASK 15 +#define TC_QOPT_MAX_QUEUE 16 + +enum { + TC_MQPRIO_HW_OFFLOAD_NONE, /* no offload requested */ + TC_MQPRIO_HW_OFFLOAD_TCS, /* offload TCs, no queue counts */ + __TC_MQPRIO_HW_OFFLOAD_MAX +}; + +#define TC_MQPRIO_HW_OFFLOAD_MAX (__TC_MQPRIO_HW_OFFLOAD_MAX - 1) + +enum { + TC_MQPRIO_MODE_DCB, + TC_MQPRIO_MODE_CHANNEL, + __TC_MQPRIO_MODE_MAX +}; + +#define __TC_MQPRIO_MODE_MAX (__TC_MQPRIO_MODE_MAX - 1) + +enum { + TC_MQPRIO_SHAPER_DCB, + TC_MQPRIO_SHAPER_BW_RATE, /* Add new shapers below */ + __TC_MQPRIO_SHAPER_MAX +}; + +#define __TC_MQPRIO_SHAPER_MAX (__TC_MQPRIO_SHAPER_MAX - 1) + +struct tc_mqprio_qopt { + __u8 num_tc; + __u8 prio_tc_map[TC_QOPT_BITMASK + 1]; + __u8 hw; + __u16 count[TC_QOPT_MAX_QUEUE]; + __u16 offset[TC_QOPT_MAX_QUEUE]; +}; + +#define TC_MQPRIO_F_MODE 0x1 +#define TC_MQPRIO_F_SHAPER 0x2 +#define TC_MQPRIO_F_MIN_RATE 0x4 +#define TC_MQPRIO_F_MAX_RATE 0x8 + +enum { + TCA_MQPRIO_UNSPEC, + TCA_MQPRIO_MODE, + TCA_MQPRIO_SHAPER, + TCA_MQPRIO_MIN_RATE64, + TCA_MQPRIO_MAX_RATE64, + __TCA_MQPRIO_MAX, +}; + +#define TCA_MQPRIO_MAX (__TCA_MQPRIO_MAX - 1) + +/* SFB */ + +enum { + TCA_SFB_UNSPEC, + TCA_SFB_PARMS, + __TCA_SFB_MAX, +}; + +#define TCA_SFB_MAX (__TCA_SFB_MAX - 1) + +/* + * Note: increment, decrement are Q0.16 fixed-point values. + */ +struct tc_sfb_qopt { + __u32 rehash_interval; /* delay between hash move, in ms */ + __u32 warmup_time; /* double buffering warmup time in ms (warmup_time < rehash_interval) */ + __u32 max; /* max len of qlen_min */ + __u32 bin_size; /* maximum queue length per bin */ + __u32 increment; /* probability increment, (d1 in Blue) */ + __u32 decrement; /* probability decrement, (d2 in Blue) */ + __u32 limit; /* max SFB queue length */ + __u32 penalty_rate; /* inelastic flows are rate limited to 'rate' pps */ + __u32 penalty_burst; +}; + +struct tc_sfb_xstats { + __u32 earlydrop; + __u32 penaltydrop; + __u32 bucketdrop; + __u32 queuedrop; + __u32 childdrop; /* drops in child qdisc */ + __u32 marked; + __u32 maxqlen; + __u32 maxprob; + __u32 avgprob; +}; + +#define SFB_MAX_PROB 0xFFFF + +/* QFQ */ +enum { + TCA_QFQ_UNSPEC, + TCA_QFQ_WEIGHT, + TCA_QFQ_LMAX, + __TCA_QFQ_MAX +}; + +#define TCA_QFQ_MAX (__TCA_QFQ_MAX - 1) + +struct tc_qfq_stats { + __u32 weight; + __u32 lmax; +}; + +/* CODEL */ + +enum { + TCA_CODEL_UNSPEC, + TCA_CODEL_TARGET, + TCA_CODEL_LIMIT, + TCA_CODEL_INTERVAL, + TCA_CODEL_ECN, + TCA_CODEL_CE_THRESHOLD, + __TCA_CODEL_MAX +}; + +#define TCA_CODEL_MAX (__TCA_CODEL_MAX - 1) + +struct tc_codel_xstats { + __u32 maxpacket; /* largest packet we've seen so far */ + __u32 count; /* how many drops we've done since the last time we + * entered dropping state + */ + __u32 lastcount; /* count at entry to dropping state */ + __u32 ldelay; /* in-queue delay seen by most recently dequeued packet */ + __s32 drop_next; /* time to drop next packet */ + __u32 drop_overlimit; /* number of time max qdisc packet limit was hit */ + __u32 ecn_mark; /* number of packets we ECN marked instead of dropped */ + __u32 dropping; /* are we in dropping state ? */ + __u32 ce_mark; /* number of CE marked packets because of ce_threshold */ +}; + +/* FQ_CODEL */ + +#define FQ_CODEL_QUANTUM_MAX (1 << 20) + +enum { + TCA_FQ_CODEL_UNSPEC, + TCA_FQ_CODEL_TARGET, + TCA_FQ_CODEL_LIMIT, + TCA_FQ_CODEL_INTERVAL, + TCA_FQ_CODEL_ECN, + TCA_FQ_CODEL_FLOWS, + TCA_FQ_CODEL_QUANTUM, + TCA_FQ_CODEL_CE_THRESHOLD, + TCA_FQ_CODEL_DROP_BATCH_SIZE, + TCA_FQ_CODEL_MEMORY_LIMIT, + TCA_FQ_CODEL_CE_THRESHOLD_SELECTOR, + TCA_FQ_CODEL_CE_THRESHOLD_MASK, + __TCA_FQ_CODEL_MAX +}; + +#define TCA_FQ_CODEL_MAX (__TCA_FQ_CODEL_MAX - 1) + +enum { + TCA_FQ_CODEL_XSTATS_QDISC, + TCA_FQ_CODEL_XSTATS_CLASS, +}; + +struct tc_fq_codel_qd_stats { + __u32 maxpacket; /* largest packet we've seen so far */ + __u32 drop_overlimit; /* number of time max qdisc + * packet limit was hit + */ + __u32 ecn_mark; /* number of packets we ECN marked + * instead of being dropped + */ + __u32 new_flow_count; /* number of time packets + * created a 'new flow' + */ + __u32 new_flows_len; /* count of flows in new list */ + __u32 old_flows_len; /* count of flows in old list */ + __u32 ce_mark; /* packets above ce_threshold */ + __u32 memory_usage; /* in bytes */ + __u32 drop_overmemory; +}; + +struct tc_fq_codel_cl_stats { + __s32 deficit; + __u32 ldelay; /* in-queue delay seen by most recently + * dequeued packet + */ + __u32 count; + __u32 lastcount; + __u32 dropping; + __s32 drop_next; +}; + +struct tc_fq_codel_xstats { + __u32 type; + union { + struct tc_fq_codel_qd_stats qdisc_stats; + struct tc_fq_codel_cl_stats class_stats; + }; +}; + +/* FQ */ + +enum { + TCA_FQ_UNSPEC, + + TCA_FQ_PLIMIT, /* limit of total number of packets in queue */ + + TCA_FQ_FLOW_PLIMIT, /* limit of packets per flow */ + + TCA_FQ_QUANTUM, /* RR quantum */ + + TCA_FQ_INITIAL_QUANTUM, /* RR quantum for new flow */ + + TCA_FQ_RATE_ENABLE, /* enable/disable rate limiting */ + + TCA_FQ_FLOW_DEFAULT_RATE,/* obsolete, do not use */ + + TCA_FQ_FLOW_MAX_RATE, /* per flow max rate */ + + TCA_FQ_BUCKETS_LOG, /* log2(number of buckets) */ + + TCA_FQ_FLOW_REFILL_DELAY, /* flow credit refill delay in usec */ + + TCA_FQ_ORPHAN_MASK, /* mask applied to orphaned skb hashes */ + + TCA_FQ_LOW_RATE_THRESHOLD, /* per packet delay under this rate */ + + TCA_FQ_CE_THRESHOLD, /* DCTCP-like CE-marking threshold */ + + TCA_FQ_TIMER_SLACK, /* timer slack */ + + TCA_FQ_HORIZON, /* time horizon in us */ + + TCA_FQ_HORIZON_DROP, /* drop packets beyond horizon, or cap their EDT */ + + __TCA_FQ_MAX +}; + +#define TCA_FQ_MAX (__TCA_FQ_MAX - 1) + +struct tc_fq_qd_stats { + __u64 gc_flows; + __u64 highprio_packets; + __u64 tcp_retrans; + __u64 throttled; + __u64 flows_plimit; + __u64 pkts_too_long; + __u64 allocation_errors; + __s64 time_next_delayed_flow; + __u32 flows; + __u32 inactive_flows; + __u32 throttled_flows; + __u32 unthrottle_latency_ns; + __u64 ce_mark; /* packets above ce_threshold */ + __u64 horizon_drops; + __u64 horizon_caps; +}; + +/* Heavy-Hitter Filter */ + +enum { + TCA_HHF_UNSPEC, + TCA_HHF_BACKLOG_LIMIT, + TCA_HHF_QUANTUM, + TCA_HHF_HH_FLOWS_LIMIT, + TCA_HHF_RESET_TIMEOUT, + TCA_HHF_ADMIT_BYTES, + TCA_HHF_EVICT_TIMEOUT, + TCA_HHF_NON_HH_WEIGHT, + __TCA_HHF_MAX +}; + +#define TCA_HHF_MAX (__TCA_HHF_MAX - 1) + +struct tc_hhf_xstats { + __u32 drop_overlimit; /* number of times max qdisc packet limit + * was hit + */ + __u32 hh_overlimit; /* number of times max heavy-hitters was hit */ + __u32 hh_tot_count; /* number of captured heavy-hitters so far */ + __u32 hh_cur_count; /* number of current heavy-hitters */ +}; + +/* PIE */ +enum { + TCA_PIE_UNSPEC, + TCA_PIE_TARGET, + TCA_PIE_LIMIT, + TCA_PIE_TUPDATE, + TCA_PIE_ALPHA, + TCA_PIE_BETA, + TCA_PIE_ECN, + TCA_PIE_BYTEMODE, + TCA_PIE_DQ_RATE_ESTIMATOR, + __TCA_PIE_MAX +}; +#define TCA_PIE_MAX (__TCA_PIE_MAX - 1) + +struct tc_pie_xstats { + __u64 prob; /* current probability */ + __u32 delay; /* current delay in ms */ + __u32 avg_dq_rate; /* current average dq_rate in + * bits/pie_time + */ + __u32 dq_rate_estimating; /* is avg_dq_rate being calculated? */ + __u32 packets_in; /* total number of packets enqueued */ + __u32 dropped; /* packets dropped due to pie_action */ + __u32 overlimit; /* dropped due to lack of space + * in queue + */ + __u32 maxq; /* maximum queue size */ + __u32 ecn_mark; /* packets marked with ecn*/ +}; + +/* FQ PIE */ +enum { + TCA_FQ_PIE_UNSPEC, + TCA_FQ_PIE_LIMIT, + TCA_FQ_PIE_FLOWS, + TCA_FQ_PIE_TARGET, + TCA_FQ_PIE_TUPDATE, + TCA_FQ_PIE_ALPHA, + TCA_FQ_PIE_BETA, + TCA_FQ_PIE_QUANTUM, + TCA_FQ_PIE_MEMORY_LIMIT, + TCA_FQ_PIE_ECN_PROB, + TCA_FQ_PIE_ECN, + TCA_FQ_PIE_BYTEMODE, + TCA_FQ_PIE_DQ_RATE_ESTIMATOR, + __TCA_FQ_PIE_MAX +}; +#define TCA_FQ_PIE_MAX (__TCA_FQ_PIE_MAX - 1) + +struct tc_fq_pie_xstats { + __u32 packets_in; /* total number of packets enqueued */ + __u32 dropped; /* packets dropped due to fq_pie_action */ + __u32 overlimit; /* dropped due to lack of space in queue */ + __u32 overmemory; /* dropped due to lack of memory in queue */ + __u32 ecn_mark; /* packets marked with ecn */ + __u32 new_flow_count; /* count of new flows created by packets */ + __u32 new_flows_len; /* count of flows in new list */ + __u32 old_flows_len; /* count of flows in old list */ + __u32 memory_usage; /* total memory across all queues */ +}; + +/* CBS */ +struct tc_cbs_qopt { + __u8 offload; + __u8 _pad[3]; + __s32 hicredit; + __s32 locredit; + __s32 idleslope; + __s32 sendslope; +}; + +enum { + TCA_CBS_UNSPEC, + TCA_CBS_PARMS, + __TCA_CBS_MAX, +}; + +#define TCA_CBS_MAX (__TCA_CBS_MAX - 1) + + +/* ETF */ +struct tc_etf_qopt { + __s32 delta; + __s32 clockid; + __u32 flags; +#define TC_ETF_DEADLINE_MODE_ON _BITUL(0) +#define TC_ETF_OFFLOAD_ON _BITUL(1) +#define TC_ETF_SKIP_SOCK_CHECK _BITUL(2) +}; + +enum { + TCA_ETF_UNSPEC, + TCA_ETF_PARMS, + __TCA_ETF_MAX, +}; + +#define TCA_ETF_MAX (__TCA_ETF_MAX - 1) + + +/* CAKE */ +enum { + TCA_CAKE_UNSPEC, + TCA_CAKE_PAD, + TCA_CAKE_BASE_RATE64, + TCA_CAKE_DIFFSERV_MODE, + TCA_CAKE_ATM, + TCA_CAKE_FLOW_MODE, + TCA_CAKE_OVERHEAD, + TCA_CAKE_RTT, + TCA_CAKE_TARGET, + TCA_CAKE_AUTORATE, + TCA_CAKE_MEMORY, + TCA_CAKE_NAT, + TCA_CAKE_RAW, + TCA_CAKE_WASH, + TCA_CAKE_MPU, + TCA_CAKE_INGRESS, + TCA_CAKE_ACK_FILTER, + TCA_CAKE_SPLIT_GSO, + TCA_CAKE_FWMARK, + __TCA_CAKE_MAX +}; +#define TCA_CAKE_MAX (__TCA_CAKE_MAX - 1) + +enum { + __TCA_CAKE_STATS_INVALID, + TCA_CAKE_STATS_PAD, + TCA_CAKE_STATS_CAPACITY_ESTIMATE64, + TCA_CAKE_STATS_MEMORY_LIMIT, + TCA_CAKE_STATS_MEMORY_USED, + TCA_CAKE_STATS_AVG_NETOFF, + TCA_CAKE_STATS_MIN_NETLEN, + TCA_CAKE_STATS_MAX_NETLEN, + TCA_CAKE_STATS_MIN_ADJLEN, + TCA_CAKE_STATS_MAX_ADJLEN, + TCA_CAKE_STATS_TIN_STATS, + TCA_CAKE_STATS_DEFICIT, + TCA_CAKE_STATS_COBALT_COUNT, + TCA_CAKE_STATS_DROPPING, + TCA_CAKE_STATS_DROP_NEXT_US, + TCA_CAKE_STATS_P_DROP, + TCA_CAKE_STATS_BLUE_TIMER_US, + __TCA_CAKE_STATS_MAX +}; +#define TCA_CAKE_STATS_MAX (__TCA_CAKE_STATS_MAX - 1) + +enum { + __TCA_CAKE_TIN_STATS_INVALID, + TCA_CAKE_TIN_STATS_PAD, + TCA_CAKE_TIN_STATS_SENT_PACKETS, + TCA_CAKE_TIN_STATS_SENT_BYTES64, + TCA_CAKE_TIN_STATS_DROPPED_PACKETS, + TCA_CAKE_TIN_STATS_DROPPED_BYTES64, + TCA_CAKE_TIN_STATS_ACKS_DROPPED_PACKETS, + TCA_CAKE_TIN_STATS_ACKS_DROPPED_BYTES64, + TCA_CAKE_TIN_STATS_ECN_MARKED_PACKETS, + TCA_CAKE_TIN_STATS_ECN_MARKED_BYTES64, + TCA_CAKE_TIN_STATS_BACKLOG_PACKETS, + TCA_CAKE_TIN_STATS_BACKLOG_BYTES, + TCA_CAKE_TIN_STATS_THRESHOLD_RATE64, + TCA_CAKE_TIN_STATS_TARGET_US, + TCA_CAKE_TIN_STATS_INTERVAL_US, + TCA_CAKE_TIN_STATS_WAY_INDIRECT_HITS, + TCA_CAKE_TIN_STATS_WAY_MISSES, + TCA_CAKE_TIN_STATS_WAY_COLLISIONS, + TCA_CAKE_TIN_STATS_PEAK_DELAY_US, + TCA_CAKE_TIN_STATS_AVG_DELAY_US, + TCA_CAKE_TIN_STATS_BASE_DELAY_US, + TCA_CAKE_TIN_STATS_SPARSE_FLOWS, + TCA_CAKE_TIN_STATS_BULK_FLOWS, + TCA_CAKE_TIN_STATS_UNRESPONSIVE_FLOWS, + TCA_CAKE_TIN_STATS_MAX_SKBLEN, + TCA_CAKE_TIN_STATS_FLOW_QUANTUM, + __TCA_CAKE_TIN_STATS_MAX +}; +#define TCA_CAKE_TIN_STATS_MAX (__TCA_CAKE_TIN_STATS_MAX - 1) +#define TC_CAKE_MAX_TINS (8) + +enum { + CAKE_FLOW_NONE = 0, + CAKE_FLOW_SRC_IP, + CAKE_FLOW_DST_IP, + CAKE_FLOW_HOSTS, /* = CAKE_FLOW_SRC_IP | CAKE_FLOW_DST_IP */ + CAKE_FLOW_FLOWS, + CAKE_FLOW_DUAL_SRC, /* = CAKE_FLOW_SRC_IP | CAKE_FLOW_FLOWS */ + CAKE_FLOW_DUAL_DST, /* = CAKE_FLOW_DST_IP | CAKE_FLOW_FLOWS */ + CAKE_FLOW_TRIPLE, /* = CAKE_FLOW_HOSTS | CAKE_FLOW_FLOWS */ + CAKE_FLOW_MAX, +}; + +enum { + CAKE_DIFFSERV_DIFFSERV3 = 0, + CAKE_DIFFSERV_DIFFSERV4, + CAKE_DIFFSERV_DIFFSERV8, + CAKE_DIFFSERV_BESTEFFORT, + CAKE_DIFFSERV_PRECEDENCE, + CAKE_DIFFSERV_MAX +}; + +enum { + CAKE_ACK_NONE = 0, + CAKE_ACK_FILTER, + CAKE_ACK_AGGRESSIVE, + CAKE_ACK_MAX +}; + +enum { + CAKE_ATM_NONE = 0, + CAKE_ATM_ATM, + CAKE_ATM_PTM, + CAKE_ATM_MAX +}; + + +/* TAPRIO */ +enum { + TC_TAPRIO_CMD_SET_GATES = 0x00, + TC_TAPRIO_CMD_SET_AND_HOLD = 0x01, + TC_TAPRIO_CMD_SET_AND_RELEASE = 0x02, +}; + +enum { + TCA_TAPRIO_SCHED_ENTRY_UNSPEC, + TCA_TAPRIO_SCHED_ENTRY_INDEX, /* u32 */ + TCA_TAPRIO_SCHED_ENTRY_CMD, /* u8 */ + TCA_TAPRIO_SCHED_ENTRY_GATE_MASK, /* u32 */ + TCA_TAPRIO_SCHED_ENTRY_INTERVAL, /* u32 */ + __TCA_TAPRIO_SCHED_ENTRY_MAX, +}; +#define TCA_TAPRIO_SCHED_ENTRY_MAX (__TCA_TAPRIO_SCHED_ENTRY_MAX - 1) + +/* The format for schedule entry list is: + * [TCA_TAPRIO_SCHED_ENTRY_LIST] + * [TCA_TAPRIO_SCHED_ENTRY] + * [TCA_TAPRIO_SCHED_ENTRY_CMD] + * [TCA_TAPRIO_SCHED_ENTRY_GATES] + * [TCA_TAPRIO_SCHED_ENTRY_INTERVAL] + */ +enum { + TCA_TAPRIO_SCHED_UNSPEC, + TCA_TAPRIO_SCHED_ENTRY, + __TCA_TAPRIO_SCHED_MAX, +}; + +#define TCA_TAPRIO_SCHED_MAX (__TCA_TAPRIO_SCHED_MAX - 1) + +/* The format for the admin sched (dump only): + * [TCA_TAPRIO_SCHED_ADMIN_SCHED] + * [TCA_TAPRIO_ATTR_SCHED_BASE_TIME] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_CMD] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_GATES] + * [TCA_TAPRIO_ATTR_SCHED_ENTRY_INTERVAL] + */ + +#define TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST _BITUL(0) +#define TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD _BITUL(1) + +enum { + TCA_TAPRIO_TC_ENTRY_UNSPEC, + TCA_TAPRIO_TC_ENTRY_INDEX, /* u32 */ + TCA_TAPRIO_TC_ENTRY_MAX_SDU, /* u32 */ + + /* add new constants above here */ + __TCA_TAPRIO_TC_ENTRY_CNT, + TCA_TAPRIO_TC_ENTRY_MAX = (__TCA_TAPRIO_TC_ENTRY_CNT - 1) +}; + +enum { + TCA_TAPRIO_ATTR_UNSPEC, + TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */ + TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST, /* nested of entry */ + TCA_TAPRIO_ATTR_SCHED_BASE_TIME, /* s64 */ + TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY, /* single entry */ + TCA_TAPRIO_ATTR_SCHED_CLOCKID, /* s32 */ + TCA_TAPRIO_PAD, + TCA_TAPRIO_ATTR_ADMIN_SCHED, /* The admin sched, only used in dump */ + TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME, /* s64 */ + TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME_EXTENSION, /* s64 */ + TCA_TAPRIO_ATTR_FLAGS, /* u32 */ + TCA_TAPRIO_ATTR_TXTIME_DELAY, /* u32 */ + TCA_TAPRIO_ATTR_TC_ENTRY, /* nest */ + __TCA_TAPRIO_ATTR_MAX, +}; + +#define TCA_TAPRIO_ATTR_MAX (__TCA_TAPRIO_ATTR_MAX - 1) + +/* ETS */ + +#define TCQ_ETS_MAX_BANDS 16 + +enum { + TCA_ETS_UNSPEC, + TCA_ETS_NBANDS, /* u8 */ + TCA_ETS_NSTRICT, /* u8 */ + TCA_ETS_QUANTA, /* nested TCA_ETS_QUANTA_BAND */ + TCA_ETS_QUANTA_BAND, /* u32 */ + TCA_ETS_PRIOMAP, /* nested TCA_ETS_PRIOMAP_BAND */ + TCA_ETS_PRIOMAP_BAND, /* u8 */ + __TCA_ETS_MAX, +}; + +#define TCA_ETS_MAX (__TCA_ETS_MAX - 1) + +#endif diff --git a/src/basic/linux/rtnetlink.h b/src/basic/linux/rtnetlink.h new file mode 100644 index 0000000..eb2747d --- /dev/null +++ b/src/basic/linux/rtnetlink.h @@ -0,0 +1,826 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_RTNETLINK_H +#define _UAPI__LINUX_RTNETLINK_H + +#include <linux/types.h> +#include <linux/netlink.h> +#include <linux/if_link.h> +#include <linux/if_addr.h> +#include <linux/neighbour.h> + +/* rtnetlink families. Values up to 127 are reserved for real address + * families, values above 128 may be used arbitrarily. + */ +#define RTNL_FAMILY_IPMR 128 +#define RTNL_FAMILY_IP6MR 129 +#define RTNL_FAMILY_MAX 129 + +/**** + * Routing/neighbour discovery messages. + ****/ + +/* Types of messages */ + +enum { + RTM_BASE = 16, +#define RTM_BASE RTM_BASE + + RTM_NEWLINK = 16, +#define RTM_NEWLINK RTM_NEWLINK + RTM_DELLINK, +#define RTM_DELLINK RTM_DELLINK + RTM_GETLINK, +#define RTM_GETLINK RTM_GETLINK + RTM_SETLINK, +#define RTM_SETLINK RTM_SETLINK + + RTM_NEWADDR = 20, +#define RTM_NEWADDR RTM_NEWADDR + RTM_DELADDR, +#define RTM_DELADDR RTM_DELADDR + RTM_GETADDR, +#define RTM_GETADDR RTM_GETADDR + + RTM_NEWROUTE = 24, +#define RTM_NEWROUTE RTM_NEWROUTE + RTM_DELROUTE, +#define RTM_DELROUTE RTM_DELROUTE + RTM_GETROUTE, +#define RTM_GETROUTE RTM_GETROUTE + + RTM_NEWNEIGH = 28, +#define RTM_NEWNEIGH RTM_NEWNEIGH + RTM_DELNEIGH, +#define RTM_DELNEIGH RTM_DELNEIGH + RTM_GETNEIGH, +#define RTM_GETNEIGH RTM_GETNEIGH + + RTM_NEWRULE = 32, +#define RTM_NEWRULE RTM_NEWRULE + RTM_DELRULE, +#define RTM_DELRULE RTM_DELRULE + RTM_GETRULE, +#define RTM_GETRULE RTM_GETRULE + + RTM_NEWQDISC = 36, +#define RTM_NEWQDISC RTM_NEWQDISC + RTM_DELQDISC, +#define RTM_DELQDISC RTM_DELQDISC + RTM_GETQDISC, +#define RTM_GETQDISC RTM_GETQDISC + + RTM_NEWTCLASS = 40, +#define RTM_NEWTCLASS RTM_NEWTCLASS + RTM_DELTCLASS, +#define RTM_DELTCLASS RTM_DELTCLASS + RTM_GETTCLASS, +#define RTM_GETTCLASS RTM_GETTCLASS + + RTM_NEWTFILTER = 44, +#define RTM_NEWTFILTER RTM_NEWTFILTER + RTM_DELTFILTER, +#define RTM_DELTFILTER RTM_DELTFILTER + RTM_GETTFILTER, +#define RTM_GETTFILTER RTM_GETTFILTER + + RTM_NEWACTION = 48, +#define RTM_NEWACTION RTM_NEWACTION + RTM_DELACTION, +#define RTM_DELACTION RTM_DELACTION + RTM_GETACTION, +#define RTM_GETACTION RTM_GETACTION + + RTM_NEWPREFIX = 52, +#define RTM_NEWPREFIX RTM_NEWPREFIX + + RTM_GETMULTICAST = 58, +#define RTM_GETMULTICAST RTM_GETMULTICAST + + RTM_GETANYCAST = 62, +#define RTM_GETANYCAST RTM_GETANYCAST + + RTM_NEWNEIGHTBL = 64, +#define RTM_NEWNEIGHTBL RTM_NEWNEIGHTBL + RTM_GETNEIGHTBL = 66, +#define RTM_GETNEIGHTBL RTM_GETNEIGHTBL + RTM_SETNEIGHTBL, +#define RTM_SETNEIGHTBL RTM_SETNEIGHTBL + + RTM_NEWNDUSEROPT = 68, +#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT + + RTM_NEWADDRLABEL = 72, +#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL + RTM_DELADDRLABEL, +#define RTM_DELADDRLABEL RTM_DELADDRLABEL + RTM_GETADDRLABEL, +#define RTM_GETADDRLABEL RTM_GETADDRLABEL + + RTM_GETDCB = 78, +#define RTM_GETDCB RTM_GETDCB + RTM_SETDCB, +#define RTM_SETDCB RTM_SETDCB + + RTM_NEWNETCONF = 80, +#define RTM_NEWNETCONF RTM_NEWNETCONF + RTM_DELNETCONF, +#define RTM_DELNETCONF RTM_DELNETCONF + RTM_GETNETCONF = 82, +#define RTM_GETNETCONF RTM_GETNETCONF + + RTM_NEWMDB = 84, +#define RTM_NEWMDB RTM_NEWMDB + RTM_DELMDB = 85, +#define RTM_DELMDB RTM_DELMDB + RTM_GETMDB = 86, +#define RTM_GETMDB RTM_GETMDB + + RTM_NEWNSID = 88, +#define RTM_NEWNSID RTM_NEWNSID + RTM_DELNSID = 89, +#define RTM_DELNSID RTM_DELNSID + RTM_GETNSID = 90, +#define RTM_GETNSID RTM_GETNSID + + RTM_NEWSTATS = 92, +#define RTM_NEWSTATS RTM_NEWSTATS + RTM_GETSTATS = 94, +#define RTM_GETSTATS RTM_GETSTATS + RTM_SETSTATS, +#define RTM_SETSTATS RTM_SETSTATS + + RTM_NEWCACHEREPORT = 96, +#define RTM_NEWCACHEREPORT RTM_NEWCACHEREPORT + + RTM_NEWCHAIN = 100, +#define RTM_NEWCHAIN RTM_NEWCHAIN + RTM_DELCHAIN, +#define RTM_DELCHAIN RTM_DELCHAIN + RTM_GETCHAIN, +#define RTM_GETCHAIN RTM_GETCHAIN + + RTM_NEWNEXTHOP = 104, +#define RTM_NEWNEXTHOP RTM_NEWNEXTHOP + RTM_DELNEXTHOP, +#define RTM_DELNEXTHOP RTM_DELNEXTHOP + RTM_GETNEXTHOP, +#define RTM_GETNEXTHOP RTM_GETNEXTHOP + + RTM_NEWLINKPROP = 108, +#define RTM_NEWLINKPROP RTM_NEWLINKPROP + RTM_DELLINKPROP, +#define RTM_DELLINKPROP RTM_DELLINKPROP + RTM_GETLINKPROP, +#define RTM_GETLINKPROP RTM_GETLINKPROP + + RTM_NEWVLAN = 112, +#define RTM_NEWNVLAN RTM_NEWVLAN + RTM_DELVLAN, +#define RTM_DELVLAN RTM_DELVLAN + RTM_GETVLAN, +#define RTM_GETVLAN RTM_GETVLAN + + RTM_NEWNEXTHOPBUCKET = 116, +#define RTM_NEWNEXTHOPBUCKET RTM_NEWNEXTHOPBUCKET + RTM_DELNEXTHOPBUCKET, +#define RTM_DELNEXTHOPBUCKET RTM_DELNEXTHOPBUCKET + RTM_GETNEXTHOPBUCKET, +#define RTM_GETNEXTHOPBUCKET RTM_GETNEXTHOPBUCKET + + RTM_NEWTUNNEL = 120, +#define RTM_NEWTUNNEL RTM_NEWTUNNEL + RTM_DELTUNNEL, +#define RTM_DELTUNNEL RTM_DELTUNNEL + RTM_GETTUNNEL, +#define RTM_GETTUNNEL RTM_GETTUNNEL + + __RTM_MAX, +#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) +}; + +#define RTM_NR_MSGTYPES (RTM_MAX + 1 - RTM_BASE) +#define RTM_NR_FAMILIES (RTM_NR_MSGTYPES >> 2) +#define RTM_FAM(cmd) (((cmd) - RTM_BASE) >> 2) + +/* + Generic structure for encapsulation of optional route information. + It is reminiscent of sockaddr, but with sa_family replaced + with attribute type. + */ + +struct rtattr { + unsigned short rta_len; + unsigned short rta_type; +}; + +/* Macros to handle rtattributes */ + +#define RTA_ALIGNTO 4U +#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) ) +#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \ + (rta)->rta_len >= sizeof(struct rtattr) && \ + (rta)->rta_len <= (len)) +#define RTA_NEXT(rta,attrlen) ((attrlen) -= RTA_ALIGN((rta)->rta_len), \ + (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len))) +#define RTA_LENGTH(len) (RTA_ALIGN(sizeof(struct rtattr)) + (len)) +#define RTA_SPACE(len) RTA_ALIGN(RTA_LENGTH(len)) +#define RTA_DATA(rta) ((void*)(((char*)(rta)) + RTA_LENGTH(0))) +#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0)) + + + + +/****************************************************************************** + * Definitions used in routing table administration. + ****/ + +struct rtmsg { + unsigned char rtm_family; + unsigned char rtm_dst_len; + unsigned char rtm_src_len; + unsigned char rtm_tos; + + unsigned char rtm_table; /* Routing table id */ + unsigned char rtm_protocol; /* Routing protocol; see below */ + unsigned char rtm_scope; /* See below */ + unsigned char rtm_type; /* See below */ + + unsigned rtm_flags; +}; + +/* rtm_type */ + +enum { + RTN_UNSPEC, + RTN_UNICAST, /* Gateway or direct route */ + RTN_LOCAL, /* Accept locally */ + RTN_BROADCAST, /* Accept locally as broadcast, + send as broadcast */ + RTN_ANYCAST, /* Accept locally as broadcast, + but send as unicast */ + RTN_MULTICAST, /* Multicast route */ + RTN_BLACKHOLE, /* Drop */ + RTN_UNREACHABLE, /* Destination is unreachable */ + RTN_PROHIBIT, /* Administratively prohibited */ + RTN_THROW, /* Not in this table */ + RTN_NAT, /* Translate this address */ + RTN_XRESOLVE, /* Use external resolver */ + __RTN_MAX +}; + +#define RTN_MAX (__RTN_MAX - 1) + + +/* rtm_protocol */ + +#define RTPROT_UNSPEC 0 +#define RTPROT_REDIRECT 1 /* Route installed by ICMP redirects; + not used by current IPv4 */ +#define RTPROT_KERNEL 2 /* Route installed by kernel */ +#define RTPROT_BOOT 3 /* Route installed during boot */ +#define RTPROT_STATIC 4 /* Route installed by administrator */ + +/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel; + they are just passed from user and back as is. + It will be used by hypothetical multiple routing daemons. + Note that protocol values should be standardized in order to + avoid conflicts. + */ + +#define RTPROT_GATED 8 /* Apparently, GateD */ +#define RTPROT_RA 9 /* RDISC/ND router advertisements */ +#define RTPROT_MRT 10 /* Merit MRT */ +#define RTPROT_ZEBRA 11 /* Zebra */ +#define RTPROT_BIRD 12 /* BIRD */ +#define RTPROT_DNROUTED 13 /* DECnet routing daemon */ +#define RTPROT_XORP 14 /* XORP */ +#define RTPROT_NTK 15 /* Netsukuku */ +#define RTPROT_DHCP 16 /* DHCP client */ +#define RTPROT_MROUTED 17 /* Multicast daemon */ +#define RTPROT_KEEPALIVED 18 /* Keepalived daemon */ +#define RTPROT_BABEL 42 /* Babel daemon */ +#define RTPROT_OPENR 99 /* Open Routing (Open/R) Routes */ +#define RTPROT_BGP 186 /* BGP Routes */ +#define RTPROT_ISIS 187 /* ISIS Routes */ +#define RTPROT_OSPF 188 /* OSPF Routes */ +#define RTPROT_RIP 189 /* RIP Routes */ +#define RTPROT_EIGRP 192 /* EIGRP Routes */ + +/* rtm_scope + + Really it is not scope, but sort of distance to the destination. + NOWHERE are reserved for not existing destinations, HOST is our + local addresses, LINK are destinations, located on directly attached + link and UNIVERSE is everywhere in the Universe. + + Intermediate values are also possible f.e. interior routes + could be assigned a value between UNIVERSE and LINK. +*/ + +enum rt_scope_t { + RT_SCOPE_UNIVERSE=0, +/* User defined values */ + RT_SCOPE_SITE=200, + RT_SCOPE_LINK=253, + RT_SCOPE_HOST=254, + RT_SCOPE_NOWHERE=255 +}; + +/* rtm_flags */ + +#define RTM_F_NOTIFY 0x100 /* Notify user of route change */ +#define RTM_F_CLONED 0x200 /* This route is cloned */ +#define RTM_F_EQUALIZE 0x400 /* Multipath equalizer: NI */ +#define RTM_F_PREFIX 0x800 /* Prefix addresses */ +#define RTM_F_LOOKUP_TABLE 0x1000 /* set rtm_table to FIB lookup result */ +#define RTM_F_FIB_MATCH 0x2000 /* return full fib lookup match */ +#define RTM_F_OFFLOAD 0x4000 /* route is offloaded */ +#define RTM_F_TRAP 0x8000 /* route is trapping packets */ +#define RTM_F_OFFLOAD_FAILED 0x20000000 /* route offload failed, this value + * is chosen to avoid conflicts with + * other flags defined in + * include/uapi/linux/ipv6_route.h + */ + +/* Reserved table identifiers */ + +enum rt_class_t { + RT_TABLE_UNSPEC=0, +/* User defined values */ + RT_TABLE_COMPAT=252, + RT_TABLE_DEFAULT=253, + RT_TABLE_MAIN=254, + RT_TABLE_LOCAL=255, + RT_TABLE_MAX=0xFFFFFFFF +}; + + +/* Routing message attributes */ + +enum rtattr_type_t { + RTA_UNSPEC, + RTA_DST, + RTA_SRC, + RTA_IIF, + RTA_OIF, + RTA_GATEWAY, + RTA_PRIORITY, + RTA_PREFSRC, + RTA_METRICS, + RTA_MULTIPATH, + RTA_PROTOINFO, /* no longer used */ + RTA_FLOW, + RTA_CACHEINFO, + RTA_SESSION, /* no longer used */ + RTA_MP_ALGO, /* no longer used */ + RTA_TABLE, + RTA_MARK, + RTA_MFC_STATS, + RTA_VIA, + RTA_NEWDST, + RTA_PREF, + RTA_ENCAP_TYPE, + RTA_ENCAP, + RTA_EXPIRES, + RTA_PAD, + RTA_UID, + RTA_TTL_PROPAGATE, + RTA_IP_PROTO, + RTA_SPORT, + RTA_DPORT, + RTA_NH_ID, + __RTA_MAX +}; + +#define RTA_MAX (__RTA_MAX - 1) + +#define RTM_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg)))) +#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg)) + +/* RTM_MULTIPATH --- array of struct rtnexthop. + * + * "struct rtnexthop" describes all necessary nexthop information, + * i.e. parameters of path to a destination via this nexthop. + * + * At the moment it is impossible to set different prefsrc, mtu, window + * and rtt for different paths from multipath. + */ + +struct rtnexthop { + unsigned short rtnh_len; + unsigned char rtnh_flags; + unsigned char rtnh_hops; + int rtnh_ifindex; +}; + +/* rtnh_flags */ + +#define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ +#define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ +#define RTNH_F_ONLINK 4 /* Gateway is forced on link */ +#define RTNH_F_OFFLOAD 8 /* Nexthop is offloaded */ +#define RTNH_F_LINKDOWN 16 /* carrier-down on nexthop */ +#define RTNH_F_UNRESOLVED 32 /* The entry is unresolved (ipmr) */ +#define RTNH_F_TRAP 64 /* Nexthop is trapping packets */ + +#define RTNH_COMPARE_MASK (RTNH_F_DEAD | RTNH_F_LINKDOWN | \ + RTNH_F_OFFLOAD | RTNH_F_TRAP) + +/* Macros to handle hexthops */ + +#define RTNH_ALIGNTO 4 +#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) ) +#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \ + ((int)(rtnh)->rtnh_len) <= (len)) +#define RTNH_NEXT(rtnh) ((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len))) +#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len)) +#define RTNH_SPACE(len) RTNH_ALIGN(RTNH_LENGTH(len)) +#define RTNH_DATA(rtnh) ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0))) + +/* RTA_VIA */ +struct rtvia { + __kernel_sa_family_t rtvia_family; + __u8 rtvia_addr[]; +}; + +/* RTM_CACHEINFO */ + +struct rta_cacheinfo { + __u32 rta_clntref; + __u32 rta_lastuse; + __s32 rta_expires; + __u32 rta_error; + __u32 rta_used; + +#define RTNETLINK_HAVE_PEERINFO 1 + __u32 rta_id; + __u32 rta_ts; + __u32 rta_tsage; +}; + +/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */ + +enum { + RTAX_UNSPEC, +#define RTAX_UNSPEC RTAX_UNSPEC + RTAX_LOCK, +#define RTAX_LOCK RTAX_LOCK + RTAX_MTU, +#define RTAX_MTU RTAX_MTU + RTAX_WINDOW, +#define RTAX_WINDOW RTAX_WINDOW + RTAX_RTT, +#define RTAX_RTT RTAX_RTT + RTAX_RTTVAR, +#define RTAX_RTTVAR RTAX_RTTVAR + RTAX_SSTHRESH, +#define RTAX_SSTHRESH RTAX_SSTHRESH + RTAX_CWND, +#define RTAX_CWND RTAX_CWND + RTAX_ADVMSS, +#define RTAX_ADVMSS RTAX_ADVMSS + RTAX_REORDERING, +#define RTAX_REORDERING RTAX_REORDERING + RTAX_HOPLIMIT, +#define RTAX_HOPLIMIT RTAX_HOPLIMIT + RTAX_INITCWND, +#define RTAX_INITCWND RTAX_INITCWND + RTAX_FEATURES, +#define RTAX_FEATURES RTAX_FEATURES + RTAX_RTO_MIN, +#define RTAX_RTO_MIN RTAX_RTO_MIN + RTAX_INITRWND, +#define RTAX_INITRWND RTAX_INITRWND + RTAX_QUICKACK, +#define RTAX_QUICKACK RTAX_QUICKACK + RTAX_CC_ALGO, +#define RTAX_CC_ALGO RTAX_CC_ALGO + RTAX_FASTOPEN_NO_COOKIE, +#define RTAX_FASTOPEN_NO_COOKIE RTAX_FASTOPEN_NO_COOKIE + __RTAX_MAX +}; + +#define RTAX_MAX (__RTAX_MAX - 1) + +#define RTAX_FEATURE_ECN (1 << 0) +#define RTAX_FEATURE_SACK (1 << 1) +#define RTAX_FEATURE_TIMESTAMP (1 << 2) +#define RTAX_FEATURE_ALLFRAG (1 << 3) + +#define RTAX_FEATURE_MASK (RTAX_FEATURE_ECN | RTAX_FEATURE_SACK | \ + RTAX_FEATURE_TIMESTAMP | RTAX_FEATURE_ALLFRAG) + +struct rta_session { + __u8 proto; + __u8 pad1; + __u16 pad2; + + union { + struct { + __u16 sport; + __u16 dport; + } ports; + + struct { + __u8 type; + __u8 code; + __u16 ident; + } icmpt; + + __u32 spi; + } u; +}; + +struct rta_mfc_stats { + __u64 mfcs_packets; + __u64 mfcs_bytes; + __u64 mfcs_wrong_if; +}; + +/**** + * General form of address family dependent message. + ****/ + +struct rtgenmsg { + unsigned char rtgen_family; +}; + +/***************************************************************** + * Link layer specific messages. + ****/ + +/* struct ifinfomsg + * passes link level specific information, not dependent + * on network protocol. + */ + +struct ifinfomsg { + unsigned char ifi_family; + unsigned char __ifi_pad; + unsigned short ifi_type; /* ARPHRD_* */ + int ifi_index; /* Link index */ + unsigned ifi_flags; /* IFF_* flags */ + unsigned ifi_change; /* IFF_* change mask */ +}; + +/******************************************************************** + * prefix information + ****/ + +struct prefixmsg { + unsigned char prefix_family; + unsigned char prefix_pad1; + unsigned short prefix_pad2; + int prefix_ifindex; + unsigned char prefix_type; + unsigned char prefix_len; + unsigned char prefix_flags; + unsigned char prefix_pad3; +}; + +enum +{ + PREFIX_UNSPEC, + PREFIX_ADDRESS, + PREFIX_CACHEINFO, + __PREFIX_MAX +}; + +#define PREFIX_MAX (__PREFIX_MAX - 1) + +struct prefix_cacheinfo { + __u32 preferred_time; + __u32 valid_time; +}; + + +/***************************************************************** + * Traffic control messages. + ****/ + +struct tcmsg { + unsigned char tcm_family; + unsigned char tcm__pad1; + unsigned short tcm__pad2; + int tcm_ifindex; + __u32 tcm_handle; + __u32 tcm_parent; +/* tcm_block_index is used instead of tcm_parent + * in case tcm_ifindex == TCM_IFINDEX_MAGIC_BLOCK + */ +#define tcm_block_index tcm_parent + __u32 tcm_info; +}; + +/* For manipulation of filters in shared block, tcm_ifindex is set to + * TCM_IFINDEX_MAGIC_BLOCK, and tcm_parent is aliased to tcm_block_index + * which is the block index. + */ +#define TCM_IFINDEX_MAGIC_BLOCK (0xFFFFFFFFU) + +enum { + TCA_UNSPEC, + TCA_KIND, + TCA_OPTIONS, + TCA_STATS, + TCA_XSTATS, + TCA_RATE, + TCA_FCNT, + TCA_STATS2, + TCA_STAB, + TCA_PAD, + TCA_DUMP_INVISIBLE, + TCA_CHAIN, + TCA_HW_OFFLOAD, + TCA_INGRESS_BLOCK, + TCA_EGRESS_BLOCK, + TCA_DUMP_FLAGS, + __TCA_MAX +}; + +#define TCA_MAX (__TCA_MAX - 1) + +#define TCA_DUMP_FLAGS_TERSE (1 << 0) /* Means that in dump user gets only basic + * data necessary to identify the objects + * (handle, cookie, etc.) and stats. + */ + +#define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg)))) +#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg)) + +/******************************************************************** + * Neighbor Discovery userland options + ****/ + +struct nduseroptmsg { + unsigned char nduseropt_family; + unsigned char nduseropt_pad1; + unsigned short nduseropt_opts_len; /* Total length of options */ + int nduseropt_ifindex; + __u8 nduseropt_icmp_type; + __u8 nduseropt_icmp_code; + unsigned short nduseropt_pad2; + unsigned int nduseropt_pad3; + /* Followed by one or more ND options */ +}; + +enum { + NDUSEROPT_UNSPEC, + NDUSEROPT_SRCADDR, + __NDUSEROPT_MAX +}; + +#define NDUSEROPT_MAX (__NDUSEROPT_MAX - 1) + +#ifndef __KERNEL__ +/* RTnetlink multicast groups - backwards compatibility for userspace */ +#define RTMGRP_LINK 1 +#define RTMGRP_NOTIFY 2 +#define RTMGRP_NEIGH 4 +#define RTMGRP_TC 8 + +#define RTMGRP_IPV4_IFADDR 0x10 +#define RTMGRP_IPV4_MROUTE 0x20 +#define RTMGRP_IPV4_ROUTE 0x40 +#define RTMGRP_IPV4_RULE 0x80 + +#define RTMGRP_IPV6_IFADDR 0x100 +#define RTMGRP_IPV6_MROUTE 0x200 +#define RTMGRP_IPV6_ROUTE 0x400 +#define RTMGRP_IPV6_IFINFO 0x800 + +#define RTMGRP_DECnet_IFADDR 0x1000 +#define RTMGRP_DECnet_ROUTE 0x4000 + +#define RTMGRP_IPV6_PREFIX 0x20000 +#endif + +/* RTnetlink multicast groups */ +enum rtnetlink_groups { + RTNLGRP_NONE, +#define RTNLGRP_NONE RTNLGRP_NONE + RTNLGRP_LINK, +#define RTNLGRP_LINK RTNLGRP_LINK + RTNLGRP_NOTIFY, +#define RTNLGRP_NOTIFY RTNLGRP_NOTIFY + RTNLGRP_NEIGH, +#define RTNLGRP_NEIGH RTNLGRP_NEIGH + RTNLGRP_TC, +#define RTNLGRP_TC RTNLGRP_TC + RTNLGRP_IPV4_IFADDR, +#define RTNLGRP_IPV4_IFADDR RTNLGRP_IPV4_IFADDR + RTNLGRP_IPV4_MROUTE, +#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE + RTNLGRP_IPV4_ROUTE, +#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE + RTNLGRP_IPV4_RULE, +#define RTNLGRP_IPV4_RULE RTNLGRP_IPV4_RULE + RTNLGRP_IPV6_IFADDR, +#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR + RTNLGRP_IPV6_MROUTE, +#define RTNLGRP_IPV6_MROUTE RTNLGRP_IPV6_MROUTE + RTNLGRP_IPV6_ROUTE, +#define RTNLGRP_IPV6_ROUTE RTNLGRP_IPV6_ROUTE + RTNLGRP_IPV6_IFINFO, +#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO + RTNLGRP_DECnet_IFADDR, +#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR + RTNLGRP_NOP2, + RTNLGRP_DECnet_ROUTE, +#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE + RTNLGRP_DECnet_RULE, +#define RTNLGRP_DECnet_RULE RTNLGRP_DECnet_RULE + RTNLGRP_NOP4, + RTNLGRP_IPV6_PREFIX, +#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX + RTNLGRP_IPV6_RULE, +#define RTNLGRP_IPV6_RULE RTNLGRP_IPV6_RULE + RTNLGRP_ND_USEROPT, +#define RTNLGRP_ND_USEROPT RTNLGRP_ND_USEROPT + RTNLGRP_PHONET_IFADDR, +#define RTNLGRP_PHONET_IFADDR RTNLGRP_PHONET_IFADDR + RTNLGRP_PHONET_ROUTE, +#define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE + RTNLGRP_DCB, +#define RTNLGRP_DCB RTNLGRP_DCB + RTNLGRP_IPV4_NETCONF, +#define RTNLGRP_IPV4_NETCONF RTNLGRP_IPV4_NETCONF + RTNLGRP_IPV6_NETCONF, +#define RTNLGRP_IPV6_NETCONF RTNLGRP_IPV6_NETCONF + RTNLGRP_MDB, +#define RTNLGRP_MDB RTNLGRP_MDB + RTNLGRP_MPLS_ROUTE, +#define RTNLGRP_MPLS_ROUTE RTNLGRP_MPLS_ROUTE + RTNLGRP_NSID, +#define RTNLGRP_NSID RTNLGRP_NSID + RTNLGRP_MPLS_NETCONF, +#define RTNLGRP_MPLS_NETCONF RTNLGRP_MPLS_NETCONF + RTNLGRP_IPV4_MROUTE_R, +#define RTNLGRP_IPV4_MROUTE_R RTNLGRP_IPV4_MROUTE_R + RTNLGRP_IPV6_MROUTE_R, +#define RTNLGRP_IPV6_MROUTE_R RTNLGRP_IPV6_MROUTE_R + RTNLGRP_NEXTHOP, +#define RTNLGRP_NEXTHOP RTNLGRP_NEXTHOP + RTNLGRP_BRVLAN, +#define RTNLGRP_BRVLAN RTNLGRP_BRVLAN + RTNLGRP_MCTP_IFADDR, +#define RTNLGRP_MCTP_IFADDR RTNLGRP_MCTP_IFADDR + RTNLGRP_TUNNEL, +#define RTNLGRP_TUNNEL RTNLGRP_TUNNEL + RTNLGRP_STATS, +#define RTNLGRP_STATS RTNLGRP_STATS + __RTNLGRP_MAX +}; +#define RTNLGRP_MAX (__RTNLGRP_MAX - 1) + +/* TC action piece */ +struct tcamsg { + unsigned char tca_family; + unsigned char tca__pad1; + unsigned short tca__pad2; +}; + +enum { + TCA_ROOT_UNSPEC, + TCA_ROOT_TAB, +#define TCA_ACT_TAB TCA_ROOT_TAB +#define TCAA_MAX TCA_ROOT_TAB + TCA_ROOT_FLAGS, + TCA_ROOT_COUNT, + TCA_ROOT_TIME_DELTA, /* in msecs */ + __TCA_ROOT_MAX, +#define TCA_ROOT_MAX (__TCA_ROOT_MAX - 1) +}; + +#define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg)))) +#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg)) +/* tcamsg flags stored in attribute TCA_ROOT_FLAGS + * + * TCA_ACT_FLAG_LARGE_DUMP_ON user->kernel to request for larger than + * TCA_ACT_MAX_PRIO actions in a dump. All dump responses will contain the + * number of actions being dumped stored in for user app's consumption in + * TCA_ROOT_COUNT + * + * TCA_ACT_FLAG_TERSE_DUMP user->kernel to request terse (brief) dump that only + * includes essential action info (kind, index, etc.) + * + */ +#define TCA_FLAG_LARGE_DUMP_ON (1 << 0) +#define TCA_ACT_FLAG_LARGE_DUMP_ON TCA_FLAG_LARGE_DUMP_ON +#define TCA_ACT_FLAG_TERSE_DUMP (1 << 1) + +/* New extended info filters for IFLA_EXT_MASK */ +#define RTEXT_FILTER_VF (1 << 0) +#define RTEXT_FILTER_BRVLAN (1 << 1) +#define RTEXT_FILTER_BRVLAN_COMPRESSED (1 << 2) +#define RTEXT_FILTER_SKIP_STATS (1 << 3) +#define RTEXT_FILTER_MRP (1 << 4) +#define RTEXT_FILTER_CFM_CONFIG (1 << 5) +#define RTEXT_FILTER_CFM_STATUS (1 << 6) +#define RTEXT_FILTER_MST (1 << 7) + +/* End of information exported to user level */ + + + +#endif /* _UAPI__LINUX_RTNETLINK_H */ diff --git a/src/basic/linux/stddef.h b/src/basic/linux/stddef.h new file mode 100644 index 0000000..1a73963 --- /dev/null +++ b/src/basic/linux/stddef.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_STDDEF_H +#define _UAPI_LINUX_STDDEF_H + + +#ifndef __always_inline +#define __always_inline inline +#endif + +/** + * __struct_group() - Create a mirrored named and anonyomous struct + * + * @TAG: The tag name for the named sub-struct (usually empty) + * @NAME: The identifier name of the mirrored sub-struct + * @ATTRS: Any struct attributes (usually empty) + * @MEMBERS: The member declarations for the mirrored structs + * + * Used to create an anonymous union of two structs with identical layout + * and size: one anonymous and one named. The former's members can be used + * normally without sub-struct naming, and the latter can be used to + * reason about the start, end, and size of the group of struct members. + * The named struct can also be explicitly tagged for layer reuse, as well + * as both having struct attributes appended. + */ +#define __struct_group(TAG, NAME, ATTRS, MEMBERS...) \ + union { \ + struct { MEMBERS } ATTRS; \ + struct TAG { MEMBERS } ATTRS NAME; \ + } + +/** + * __DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union + * + * @TYPE: The type of each flexible array element + * @NAME: The name of the flexible array member + * + * In order to have a flexible array member in a union or alone in a + * struct, it needs to be wrapped in an anonymous struct with at least 1 + * named member, but that member can be empty. + */ +#define __DECLARE_FLEX_ARRAY(TYPE, NAME) \ + struct { \ + struct { } __empty_ ## NAME; \ + TYPE NAME[]; \ + } +#endif diff --git a/src/basic/linux/update.sh b/src/basic/linux/update.sh new file mode 100755 index 0000000..6155766 --- /dev/null +++ b/src/basic/linux/update.sh @@ -0,0 +1,11 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: LGPL-2.1-or-later +set -eu +set -o pipefail + +for i in *.h */*.h; do + curl --fail "https://raw.githubusercontent.com/torvalds/linux/master/include/uapi/linux/$i" -o "$i" + + sed -r -i -e 's/__user //g' -e '/^#include <linux\/compiler(_types)?.h>/ d' "$i" + sed -r -i 's/^(#include <linux\/fs\.h>)/#if WANT_LINUX_FS_H\n\1\n#endif/' "$i" +done diff --git a/src/basic/linux/wireguard.h b/src/basic/linux/wireguard.h new file mode 100644 index 0000000..ae88be1 --- /dev/null +++ b/src/basic/linux/wireguard.h @@ -0,0 +1,196 @@ +/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */ +/* + * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. + * + * Documentation + * ============= + * + * The below enums and macros are for interfacing with WireGuard, using generic + * netlink, with family WG_GENL_NAME and version WG_GENL_VERSION. It defines two + * methods: get and set. Note that while they share many common attributes, + * these two functions actually accept a slightly different set of inputs and + * outputs. + * + * WG_CMD_GET_DEVICE + * ----------------- + * + * May only be called via NLM_F_REQUEST | NLM_F_DUMP. The command should contain + * one but not both of: + * + * WGDEVICE_A_IFINDEX: NLA_U32 + * WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMSIZ - 1 + * + * The kernel will then return several messages (NLM_F_MULTI) containing the + * following tree of nested items: + * + * WGDEVICE_A_IFINDEX: NLA_U32 + * WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMSIZ - 1 + * WGDEVICE_A_PRIVATE_KEY: NLA_EXACT_LEN, len WG_KEY_LEN + * WGDEVICE_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN + * WGDEVICE_A_LISTEN_PORT: NLA_U16 + * WGDEVICE_A_FWMARK: NLA_U32 + * WGDEVICE_A_PEERS: NLA_NESTED + * 0: NLA_NESTED + * WGPEER_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN + * WGPEER_A_PRESHARED_KEY: NLA_EXACT_LEN, len WG_KEY_LEN + * WGPEER_A_ENDPOINT: NLA_MIN_LEN(struct sockaddr), struct sockaddr_in or struct sockaddr_in6 + * WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL: NLA_U16 + * WGPEER_A_LAST_HANDSHAKE_TIME: NLA_EXACT_LEN, struct __kernel_timespec + * WGPEER_A_RX_BYTES: NLA_U64 + * WGPEER_A_TX_BYTES: NLA_U64 + * WGPEER_A_ALLOWEDIPS: NLA_NESTED + * 0: NLA_NESTED + * WGALLOWEDIP_A_FAMILY: NLA_U16 + * WGALLOWEDIP_A_IPADDR: NLA_MIN_LEN(struct in_addr), struct in_addr or struct in6_addr + * WGALLOWEDIP_A_CIDR_MASK: NLA_U8 + * 0: NLA_NESTED + * ... + * 0: NLA_NESTED + * ... + * ... + * WGPEER_A_PROTOCOL_VERSION: NLA_U32 + * 0: NLA_NESTED + * ... + * ... + * + * It is possible that all of the allowed IPs of a single peer will not + * fit within a single netlink message. In that case, the same peer will + * be written in the following message, except it will only contain + * WGPEER_A_PUBLIC_KEY and WGPEER_A_ALLOWEDIPS. This may occur several + * times in a row for the same peer. It is then up to the receiver to + * coalesce adjacent peers. Likewise, it is possible that all peers will + * not fit within a single message. So, subsequent peers will be sent + * in following messages, except those will only contain WGDEVICE_A_IFNAME + * and WGDEVICE_A_PEERS. It is then up to the receiver to coalesce these + * messages to form the complete list of peers. + * + * Since this is an NLA_F_DUMP command, the final message will always be + * NLMSG_DONE, even if an error occurs. However, this NLMSG_DONE message + * contains an integer error code. It is either zero or a negative error + * code corresponding to the errno. + * + * WG_CMD_SET_DEVICE + * ----------------- + * + * May only be called via NLM_F_REQUEST. The command should contain the + * following tree of nested items, containing one but not both of + * WGDEVICE_A_IFINDEX and WGDEVICE_A_IFNAME: + * + * WGDEVICE_A_IFINDEX: NLA_U32 + * WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMSIZ - 1 + * WGDEVICE_A_FLAGS: NLA_U32, 0 or WGDEVICE_F_REPLACE_PEERS if all current + * peers should be removed prior to adding the list below. + * WGDEVICE_A_PRIVATE_KEY: len WG_KEY_LEN, all zeros to remove + * WGDEVICE_A_LISTEN_PORT: NLA_U16, 0 to choose randomly + * WGDEVICE_A_FWMARK: NLA_U32, 0 to disable + * WGDEVICE_A_PEERS: NLA_NESTED + * 0: NLA_NESTED + * WGPEER_A_PUBLIC_KEY: len WG_KEY_LEN + * WGPEER_A_FLAGS: NLA_U32, 0 and/or WGPEER_F_REMOVE_ME if the + * specified peer should not exist at the end of the + * operation, rather than added/updated and/or + * WGPEER_F_REPLACE_ALLOWEDIPS if all current allowed + * IPs of this peer should be removed prior to adding + * the list below and/or WGPEER_F_UPDATE_ONLY if the + * peer should only be set if it already exists. + * WGPEER_A_PRESHARED_KEY: len WG_KEY_LEN, all zeros to remove + * WGPEER_A_ENDPOINT: struct sockaddr_in or struct sockaddr_in6 + * WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL: NLA_U16, 0 to disable + * WGPEER_A_ALLOWEDIPS: NLA_NESTED + * 0: NLA_NESTED + * WGALLOWEDIP_A_FAMILY: NLA_U16 + * WGALLOWEDIP_A_IPADDR: struct in_addr or struct in6_addr + * WGALLOWEDIP_A_CIDR_MASK: NLA_U8 + * 0: NLA_NESTED + * ... + * 0: NLA_NESTED + * ... + * ... + * WGPEER_A_PROTOCOL_VERSION: NLA_U32, should not be set or used at + * all by most users of this API, as the + * most recent protocol will be used when + * this is unset. Otherwise, must be set + * to 1. + * 0: NLA_NESTED + * ... + * ... + * + * It is possible that the amount of configuration data exceeds that of + * the maximum message length accepted by the kernel. In that case, several + * messages should be sent one after another, with each successive one + * filling in information not contained in the prior. Note that if + * WGDEVICE_F_REPLACE_PEERS is specified in the first message, it probably + * should not be specified in fragments that come after, so that the list + * of peers is only cleared the first time but appended after. Likewise for + * peers, if WGPEER_F_REPLACE_ALLOWEDIPS is specified in the first message + * of a peer, it likely should not be specified in subsequent fragments. + * + * If an error occurs, NLMSG_ERROR will reply containing an errno. + */ + +#ifndef _WG_UAPI_WIREGUARD_H +#define _WG_UAPI_WIREGUARD_H + +#define WG_GENL_NAME "wireguard" +#define WG_GENL_VERSION 1 + +#define WG_KEY_LEN 32 + +enum wg_cmd { + WG_CMD_GET_DEVICE, + WG_CMD_SET_DEVICE, + __WG_CMD_MAX +}; +#define WG_CMD_MAX (__WG_CMD_MAX - 1) + +enum wgdevice_flag { + WGDEVICE_F_REPLACE_PEERS = 1U << 0, + __WGDEVICE_F_ALL = WGDEVICE_F_REPLACE_PEERS +}; +enum wgdevice_attribute { + WGDEVICE_A_UNSPEC, + WGDEVICE_A_IFINDEX, + WGDEVICE_A_IFNAME, + WGDEVICE_A_PRIVATE_KEY, + WGDEVICE_A_PUBLIC_KEY, + WGDEVICE_A_FLAGS, + WGDEVICE_A_LISTEN_PORT, + WGDEVICE_A_FWMARK, + WGDEVICE_A_PEERS, + __WGDEVICE_A_LAST +}; +#define WGDEVICE_A_MAX (__WGDEVICE_A_LAST - 1) + +enum wgpeer_flag { + WGPEER_F_REMOVE_ME = 1U << 0, + WGPEER_F_REPLACE_ALLOWEDIPS = 1U << 1, + WGPEER_F_UPDATE_ONLY = 1U << 2, + __WGPEER_F_ALL = WGPEER_F_REMOVE_ME | WGPEER_F_REPLACE_ALLOWEDIPS | + WGPEER_F_UPDATE_ONLY +}; +enum wgpeer_attribute { + WGPEER_A_UNSPEC, + WGPEER_A_PUBLIC_KEY, + WGPEER_A_PRESHARED_KEY, + WGPEER_A_FLAGS, + WGPEER_A_ENDPOINT, + WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL, + WGPEER_A_LAST_HANDSHAKE_TIME, + WGPEER_A_RX_BYTES, + WGPEER_A_TX_BYTES, + WGPEER_A_ALLOWEDIPS, + WGPEER_A_PROTOCOL_VERSION, + __WGPEER_A_LAST +}; +#define WGPEER_A_MAX (__WGPEER_A_LAST - 1) + +enum wgallowedip_attribute { + WGALLOWEDIP_A_UNSPEC, + WGALLOWEDIP_A_FAMILY, + WGALLOWEDIP_A_IPADDR, + WGALLOWEDIP_A_CIDR_MASK, + __WGALLOWEDIP_A_LAST +}; +#define WGALLOWEDIP_A_MAX (__WGALLOWEDIP_A_LAST - 1) + +#endif /* _WG_UAPI_WIREGUARD_H */ |