Trimming default sites.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 6 insertions, 152 deletions

diff --git a/debian/config-dir/sites-available/000-default-ssl.conf b/debian/config-dir/sites-available/000-default-ssl.conf
index 334f95b..00f9a51 100644
--- a/debian/config-dir/sites-available/000-default-ssl.conf
+++ b/debian/config-dir/sites-available/000-default-ssl.conf
@@ -1,139 +1,13 @@
-<VirtualHost *:443>
-	# The ServerName directive sets the request scheme, hostname and port that
-	# the server uses to identify itself. This is used when creating
-	# redirection URLs. In the context of virtual hosts, the ServerName
-	# specifies what hostname must appear in the request's Host: header to
-	# match this virtual host. For the default virtual host (this file) this
-	# value is not decisive as it is used as a last resort host regardless.
-	# However, you must set it for any further virtual host explicitly.
+<VirtualHost _default_:443>
 	ServerName localhost
-
 	ServerAdmin root@localhost
 
 	DocumentRoot /var/www/html
 
-	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
-	# error, crit, alert, emerg.
-	# It is also possible to configure the loglevel for particular
-	# modules, e.g.
-	#LogLevel info ssl:warn
+	SSLEngine on
+	SSLCertificateKeyFile	/etc/ssl/private/ssl-cert-snakeoil.key
+	SSLCertificateFile	/etc/ssl/certs/ssl-cert-snakeoil.pem
 
 	ErrorLog ${APACHE_LOG_DIR}/error.log
 	CustomLog ${APACHE_LOG_DIR}/access.log combined
-
-	# For most configuration files from conf-available/, which are
-	# enabled or disabled at a global level, it is possible to
-	# include a line for only one particular virtual host. For example the
-	# following line enables the CGI configuration for this host only
-	# after it has been globally disabled with "a2disconf".
-	#Include conf-available/serve-cgi-bin.conf
-
-	#   SSL Engine Switch:
-	#   Enable/Disable SSL for this virtual host.
-	SSLEngine on
-
-	#   A self-signed (snakeoil) certificate can be created by installing
-	#   the ssl-cert package. See
-	#   /usr/share/doc/apache2/README.Debian.gz for more info.
-	#   If both key and certificate are stored in the same file, only the
-	#   SSLCertificateFile directive is needed.
-	SSLCertificateFile      /etc/ssl/certs/ssl-cert-snakeoil.pem
-	SSLCertificateKeyFile   /etc/ssl/private/ssl-cert-snakeoil.key
-
-	#   Server Certificate Chain:
-	#   Point SSLCertificateChainFile at a file containing the
-	#   concatenation of PEM encoded CA certificates which form the
-	#   certificate chain for the server certificate. Alternatively
-	#   the referenced file can be the same as SSLCertificateFile
-	#   when the CA certificates are directly appended to the server
-	#   certificate for convinience.
-	#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt
-
-	#   Certificate Authority (CA):
-	#   Set the CA certificate verification path where to find CA
-	#   certificates for client authentication or alternatively one
-	#   huge file containing all of them (file must be PEM encoded)
-	#   Note: Inside SSLCACertificatePath you need hash symlinks
-	#	  to point to the certificate files. Use the provided
-	#	  Makefile to update the hash symlinks after changes.
-	#SSLCACertificatePath /etc/ssl/certs/
-	#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
-
-	#   Certificate Revocation Lists (CRL):
-	#   Set the CA revocation path where to find CA CRLs for client
-	#   authentication or alternatively one huge file containing all
-	#   of them (file must be PEM encoded)
-	#   Note: Inside SSLCARevocationPath you need hash symlinks
-	#	  to point to the certificate files. Use the provided
-	#	  Makefile to update the hash symlinks after changes.
-	#SSLCARevocationPath /etc/apache2/ssl.crl/
-	#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
-
-	#   Client Authentication (Type):
-	#   Client certificate verification type and depth.  Types are
-	#   none, optional, require and optional_no_ca.  Depth is a
-	#   number which specifies how deeply to verify the certificate
-	#   issuer chain before deciding the certificate is not valid.
-	#SSLVerifyClient require
-	#SSLVerifyDepth  10
-
-	#   SSL Engine Options:
-	#   Set various options for the SSL engine.
-	#   o FakeBasicAuth:
-	#    Translate the client X.509 into a Basic Authorisation.  This means that
-	#    the standard Auth/DBMAuth methods can be used for access control.  The
-	#    user name is the `one line' version of the client's X.509 certificate.
-	#    Note that no password is obtained from the user. Every entry in the user
-	#    file needs this password: `xxj31ZMTZzkVA'.
-	#   o ExportCertData:
-	#    This exports two additional environment variables: SSL_CLIENT_CERT and
-	#    SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
-	#    server (always existing) and the client (only existing when client
-	#    authentication is used). This can be used to import the certificates
-	#    into CGI scripts.
-	#   o StdEnvVars:
-	#    This exports the standard SSL/TLS related `SSL_*' environment variables.
-	#    Per default this exportation is switched off for performance reasons,
-	#    because the extraction step is an expensive operation and is usually
-	#    useless for serving static content. So one usually enables the
-	#    exportation for CGI and SSI requests only.
-	#   o OptRenegotiate:
-	#    This enables optimized SSL connection renegotiation handling when SSL
-	#    directives are used in per-directory context.
-	#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
-	<FilesMatch "\.(?:cgi|shtml|phtml|php)$">
-		SSLOptions +StdEnvVars
-	</FilesMatch>
-	<Directory /usr/lib/cgi-bin>
-		SSLOptions +StdEnvVars
-	</Directory>
-
-	#   SSL Protocol Adjustments:
-	#   The safe and default but still SSL/TLS standard compliant shutdown
-	#   approach is that mod_ssl sends the close notify alert but doesn't wait for
-	#   the close notify alert from client. When you need a different shutdown
-	#   approach you can use one of the following variables:
-	#   o ssl-unclean-shutdown:
-	#    This forces an unclean shutdown when the connection is closed, i.e. no
-	#    SSL close notify alert is send or allowed to received.  This violates
-	#    the SSL/TLS standard but is needed for some brain-dead browsers. Use
-	#    this when you receive I/O errors because of the standard approach where
-	#    mod_ssl sends the close notify alert.
-	#   o ssl-accurate-shutdown:
-	#    This forces an accurate shutdown when the connection is closed, i.e. a
-	#    SSL close notify alert is send and mod_ssl waits for the close notify
-	#    alert of the client. This is 100% SSL/TLS standard compliant, but in
-	#    practice often causes hanging connections with brain-dead browsers. Use
-	#    this only for browsers where you know that their SSL implementation
-	#    works correctly.
-	#   Notice: Most problems of broken clients are also related to the HTTP
-	#   keep-alive facility, so you usually additionally want to disable
-	#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
-	#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
-	#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
-	#   "force-response-1.0" for this.
-	# BrowserMatch "MSIE [2-6]" \
-	#	nokeepalive ssl-unclean-shutdown \
-	#	downgrade-1.0 force-response-1.0
-
 </VirtualHost>
diff --git a/debian/config-dir/sites-available/000-default.conf b/debian/config-dir/sites-available/000-default.conf
index c0b99d6..23bbcd3 100644
--- a/debian/config-dir/sites-available/000-default.conf
+++ b/debian/config-dir/sites-available/000-default.conf
@@ -1,29 +1,9 @@
-<VirtualHost *:80>
-	# The ServerName directive sets the request scheme, hostname and port that
-	# the server uses to identify itself. This is used when creating
-	# redirection URLs. In the context of virtual hosts, the ServerName
-	# specifies what hostname must appear in the request's Host: header to
-	# match this virtual host. For the default virtual host (this file) this
-	# value is not decisive as it is used as a last resort host regardless.
-	# However, you must set it for any further virtual host explicitly.
+<VirtualHost _default_:80>
 	ServerName localhost
-
 	ServerAdmin root@localhost
-	DocumentRoot /var/www/html
 
-	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
-	# error, crit, alert, emerg.
-	# It is also possible to configure the loglevel for particular
-	# modules, e.g.
-	#LogLevel info ssl:warn
+	DocumentRoot /var/www/html
 
 	ErrorLog ${APACHE_LOG_DIR}/error.log
 	CustomLog ${APACHE_LOG_DIR}/access.log combined
-
-	# For most configuration files from conf-available/, which are
-	# enabled or disabled at a global level, it is possible to
-	# include a line for only one particular virtual host. For example the
-	# following line enables the CGI configuration for this host only
-	# after it has been globally disabled with "a2disconf".
-	#Include conf-available/serve-cgi-bin.conf
 </VirtualHost>