summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--debian/config-dir/sites-available/000-default-ssl.conf134
-rw-r--r--debian/config-dir/sites-available/000-default.conf24
2 files changed, 6 insertions, 152 deletions
diff --git a/debian/config-dir/sites-available/000-default-ssl.conf b/debian/config-dir/sites-available/000-default-ssl.conf
index 334f95b..00f9a51 100644
--- a/debian/config-dir/sites-available/000-default-ssl.conf
+++ b/debian/config-dir/sites-available/000-default-ssl.conf
@@ -1,139 +1,13 @@
-<VirtualHost *:443>
- # The ServerName directive sets the request scheme, hostname and port that
- # the server uses to identify itself. This is used when creating
- # redirection URLs. In the context of virtual hosts, the ServerName
- # specifies what hostname must appear in the request's Host: header to
- # match this virtual host. For the default virtual host (this file) this
- # value is not decisive as it is used as a last resort host regardless.
- # However, you must set it for any further virtual host explicitly.
+<VirtualHost _default_:443>
ServerName localhost
-
ServerAdmin root@localhost
DocumentRoot /var/www/html
- # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
- # error, crit, alert, emerg.
- # It is also possible to configure the loglevel for particular
- # modules, e.g.
- #LogLevel info ssl:warn
+ SSLEngine on
+ SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key
+ SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
-
- # For most configuration files from conf-available/, which are
- # enabled or disabled at a global level, it is possible to
- # include a line for only one particular virtual host. For example the
- # following line enables the CGI configuration for this host only
- # after it has been globally disabled with "a2disconf".
- #Include conf-available/serve-cgi-bin.conf
-
- # SSL Engine Switch:
- # Enable/Disable SSL for this virtual host.
- SSLEngine on
-
- # A self-signed (snakeoil) certificate can be created by installing
- # the ssl-cert package. See
- # /usr/share/doc/apache2/README.Debian.gz for more info.
- # If both key and certificate are stored in the same file, only the
- # SSLCertificateFile directive is needed.
- SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem
- SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key
-
- # Server Certificate Chain:
- # Point SSLCertificateChainFile at a file containing the
- # concatenation of PEM encoded CA certificates which form the
- # certificate chain for the server certificate. Alternatively
- # the referenced file can be the same as SSLCertificateFile
- # when the CA certificates are directly appended to the server
- # certificate for convinience.
- #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt
-
- # Certificate Authority (CA):
- # Set the CA certificate verification path where to find CA
- # certificates for client authentication or alternatively one
- # huge file containing all of them (file must be PEM encoded)
- # Note: Inside SSLCACertificatePath you need hash symlinks
- # to point to the certificate files. Use the provided
- # Makefile to update the hash symlinks after changes.
- #SSLCACertificatePath /etc/ssl/certs/
- #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
-
- # Certificate Revocation Lists (CRL):
- # Set the CA revocation path where to find CA CRLs for client
- # authentication or alternatively one huge file containing all
- # of them (file must be PEM encoded)
- # Note: Inside SSLCARevocationPath you need hash symlinks
- # to point to the certificate files. Use the provided
- # Makefile to update the hash symlinks after changes.
- #SSLCARevocationPath /etc/apache2/ssl.crl/
- #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
-
- # Client Authentication (Type):
- # Client certificate verification type and depth. Types are
- # none, optional, require and optional_no_ca. Depth is a
- # number which specifies how deeply to verify the certificate
- # issuer chain before deciding the certificate is not valid.
- #SSLVerifyClient require
- #SSLVerifyDepth 10
-
- # SSL Engine Options:
- # Set various options for the SSL engine.
- # o FakeBasicAuth:
- # Translate the client X.509 into a Basic Authorisation. This means that
- # the standard Auth/DBMAuth methods can be used for access control. The
- # user name is the `one line' version of the client's X.509 certificate.
- # Note that no password is obtained from the user. Every entry in the user
- # file needs this password: `xxj31ZMTZzkVA'.
- # o ExportCertData:
- # This exports two additional environment variables: SSL_CLIENT_CERT and
- # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
- # server (always existing) and the client (only existing when client
- # authentication is used). This can be used to import the certificates
- # into CGI scripts.
- # o StdEnvVars:
- # This exports the standard SSL/TLS related `SSL_*' environment variables.
- # Per default this exportation is switched off for performance reasons,
- # because the extraction step is an expensive operation and is usually
- # useless for serving static content. So one usually enables the
- # exportation for CGI and SSI requests only.
- # o OptRenegotiate:
- # This enables optimized SSL connection renegotiation handling when SSL
- # directives are used in per-directory context.
- #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
- <FilesMatch "\.(?:cgi|shtml|phtml|php)$">
- SSLOptions +StdEnvVars
- </FilesMatch>
- <Directory /usr/lib/cgi-bin>
- SSLOptions +StdEnvVars
- </Directory>
-
- # SSL Protocol Adjustments:
- # The safe and default but still SSL/TLS standard compliant shutdown
- # approach is that mod_ssl sends the close notify alert but doesn't wait for
- # the close notify alert from client. When you need a different shutdown
- # approach you can use one of the following variables:
- # o ssl-unclean-shutdown:
- # This forces an unclean shutdown when the connection is closed, i.e. no
- # SSL close notify alert is send or allowed to received. This violates
- # the SSL/TLS standard but is needed for some brain-dead browsers. Use
- # this when you receive I/O errors because of the standard approach where
- # mod_ssl sends the close notify alert.
- # o ssl-accurate-shutdown:
- # This forces an accurate shutdown when the connection is closed, i.e. a
- # SSL close notify alert is send and mod_ssl waits for the close notify
- # alert of the client. This is 100% SSL/TLS standard compliant, but in
- # practice often causes hanging connections with brain-dead browsers. Use
- # this only for browsers where you know that their SSL implementation
- # works correctly.
- # Notice: Most problems of broken clients are also related to the HTTP
- # keep-alive facility, so you usually additionally want to disable
- # keep-alive for those clients, too. Use variable "nokeepalive" for this.
- # Similarly, one has to force some clients to use HTTP/1.0 to workaround
- # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
- # "force-response-1.0" for this.
- # BrowserMatch "MSIE [2-6]" \
- # nokeepalive ssl-unclean-shutdown \
- # downgrade-1.0 force-response-1.0
-
</VirtualHost>
diff --git a/debian/config-dir/sites-available/000-default.conf b/debian/config-dir/sites-available/000-default.conf
index c0b99d6..23bbcd3 100644
--- a/debian/config-dir/sites-available/000-default.conf
+++ b/debian/config-dir/sites-available/000-default.conf
@@ -1,29 +1,9 @@
-<VirtualHost *:80>
- # The ServerName directive sets the request scheme, hostname and port that
- # the server uses to identify itself. This is used when creating
- # redirection URLs. In the context of virtual hosts, the ServerName
- # specifies what hostname must appear in the request's Host: header to
- # match this virtual host. For the default virtual host (this file) this
- # value is not decisive as it is used as a last resort host regardless.
- # However, you must set it for any further virtual host explicitly.
+<VirtualHost _default_:80>
ServerName localhost
-
ServerAdmin root@localhost
- DocumentRoot /var/www/html
- # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
- # error, crit, alert, emerg.
- # It is also possible to configure the loglevel for particular
- # modules, e.g.
- #LogLevel info ssl:warn
+ DocumentRoot /var/www/html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
-
- # For most configuration files from conf-available/, which are
- # enabled or disabled at a global level, it is possible to
- # include a line for only one particular virtual host. For example the
- # following line enables the CGI configuration for this host only
- # after it has been globally disabled with "a2disconf".
- #Include conf-available/serve-cgi-bin.conf
</VirtualHost>