1 files changed, 214 insertions, 0 deletions
diff --git a/bin/tests/system/checkzone/tests.sh b/bin/tests/system/checkzone/tests.sh
new file mode 100644
index 0000000..169e411
--- /dev/null
+++ b/bin/tests/system/checkzone/tests.sh
@@ -0,0 +1,214 @@
+#!/bin/sh
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0.  If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+set -e
+
+. ../conf.sh
+
+status=0
+n=1
+
+for db in zones/good*.db
+do
+	echo_i "checking $db ($n)"
+	ret=0
+	case $db in
+	zones/good-gc-msdcs.db|zones/good-spf-exception.db)
+		$CHECKZONE -k fail -i local example $db > test.out.$n 2>&1 || ret=1
+		;;
+	zones/good-dns-sd-reverse.db)
+		$CHECKZONE -k fail -i local 0.0.0.0.in-addr.arpa $db > test.out.$n 2>&1 || ret=1
+		;;
+	*)
+		$CHECKZONE -i local example $db > test.out.$n 2>&1 || ret=1
+		;;
+	esac
+	n=$((n+1))
+	if [ $ret != 0 ]; then echo_i "failed"; fi
+	status=$((status+ret))
+done
+
+for db in zones/bad*.db
+do
+	echo_i "checking $db ($n)"
+	ret=0 v=0
+	case $db in
+	zones/bad-dns-sd-reverse.db|zones/bad-svcb-servername.db)
+		$CHECKZONE -k fail -i local 0.0.0.0.in-addr.arpa $db > test.out.$n 2>&1 || v=$?
+		;;
+	*)
+                $CHECKZONE -i local example $db > test.out.$n 2>&1 || v=$?
+		;;
+	esac
+	test $v = 1 || ret=1
+	n=$((n+1))
+	if [ $ret != 0 ]; then echo_i "failed"; fi
+	status=$((status+ret))
+done
+
+echo_i "checking with journal file ($n)"
+ret=0
+$CHECKZONE -D -o test.orig.db test zones/test1.db > /dev/null 2>&1 || ret=1
+$CHECKZONE -D -o test.changed.db test zones/test2.db > /dev/null 2>&1 || ret=1
+$MAKEJOURNAL test test.orig.db test.changed.db test.orig.db.jnl 2>&1 || ret=1
+jlines=$($JOURNALPRINT test.orig.db.jnl | wc -l)
+[ $jlines = 3 ] || ret=1
+$CHECKZONE -D -j -o test.out1.db test test.orig.db > /dev/null 2>&1 || ret=1
+cmp -s test.changed.db test.out1.db || ret=1
+mv -f test.orig.db.jnl test.journal
+$CHECKZONE -D -J test.journal -o test.out2.db test test.orig.db > /dev/null 2>&1 || ret=1
+cmp -s test.changed.db test.out2.db || ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking with spf warnings ($n)"
+ret=0
+$CHECKZONE example zones/spf.db > test.out1.$n 2>&1 || ret=1
+$CHECKZONE -T ignore example zones/spf.db > test.out2.$n 2>&1 || ret=1
+grep "'x.example' found type SPF" test.out1.$n > /dev/null && ret=1
+grep "'y.example' found type SPF" test.out1.$n > /dev/null || ret=1
+grep "'example' found type SPF" test.out1.$n > /dev/null && ret=1
+grep "'x.example' found type SPF" test.out2.$n > /dev/null && ret=1
+grep "'y.example' found type SPF" test.out2.$n > /dev/null && ret=1
+grep "'example' found type SPF" test.out2.$n > /dev/null && ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking with max ttl (text) ($n)"
+ret=0
+$CHECKZONE -l 300 example zones/good1.db > test.out1.$n 2>&1 && ret=1
+$CHECKZONE -l 600 example zones/good1.db > test.out2.$n 2>&1 || ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking with max ttl (raw) ($n)"
+ret=0
+$CHECKZONE -f raw -l 300 example good1.db.raw > test.out1.$n 2>&1 && ret=1
+$CHECKZONE -f raw -l 600 example good1.db.raw > test.out2.$n 2>&1 || ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking for no 'inherited owner' warning on '\$INCLUDE file' with no new \$ORIGIN ($n)"
+ret=0
+$CHECKZONE example zones/nowarn.inherited.owner.db > test.out1.$n 2>&1 || ret=1
+grep "inherited.owner" test.out1.$n > /dev/null && ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking for 'inherited owner' warning on '\$ORIGIN + \$INCLUDE file' ($n)"
+ret=0
+$CHECKZONE example zones/warn.inherit.origin.db > test.out1.$n 2>&1 || ret=1
+grep "inherited.owner" test.out1.$n > /dev/null || ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking for 'inherited owner' warning on '\$INCLUDE file origin' ($n)"
+ret=0
+$CHECKZONE example zones/warn.inherited.owner.db > test.out1.$n 2>&1 || ret=1
+grep "inherited.owner" test.out1.$n > /dev/null || ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking that raw zone with bad class is handled ($n)"
+ret=0
+$CHECKZONE -f raw example zones/bad-badclass.raw > test.out.$n 2>&1 && ret=1
+grep "failed: bad class" test.out.$n >/dev/null || ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking that expirations that loop using serial arithmetic are handled ($n)"
+ret=0
+q=-q
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+test $ret -eq 1 || $CHECKZONE $q dyn.example.net zones/crashzone.db || ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking that nameserver below DNAME is reported even with occulted address record present ($n)"
+ret=0
+$CHECKZONE example.com zones/ns-address-below-dname.db > test.out.$n 2>&1 && ret=1
+grep "is below a DNAME" test.out.$n >/dev/null || ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "checking that delegating nameserver below DNAME is reported even with occulted address record present ($n)"
+ret=0
+$CHECKZONE example.com zones/delegating-ns-address-below-dname.db > test.out.$n 2>&1 || ret=1
+grep "is below a DNAME" test.out.$n >/dev/null || ret=1
+n=$((n+1))
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+n=$((n+1))
+echo_i "checking that named-compilezone works when reading input from stdin ($n)"
+ret=0
+# Step 1: take raw input from stdin and convert it to text/relative format.
+# Last argument "-" is optional, but it says more explicitly that we're reading from stdin.
+cat zones/zone1.db | ./named-compilezone -f text -F text -s relative \
+        -o zones/zone1_stdin.txt zone1.com - > /dev/null || ret=1
+status=$((status+ret))
+
+ret=0
+# Step 2: take raw input from file and convert it to text format.
+./named-compilezone -f text -F text -s relative -o zones/zone1_file.txt \
+        zone1.com zones/zone1.db > /dev/null || ret=1
+status=$((status+ret))
+
+ret=0
+# Step 3: Ensure that output conversion from stdin is the same as the output conversion from a file.
+diff zones/zone1_file.txt zones/zone1_stdin.txt >/dev/null 2>&1 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+n=$((n+1))
+ret=0
+echo_i "checking integer overflow is prevented in \$GENERATE ($n)"
+$CHECKZONE -D example.com zones/generate-overflow.db > test.out.$n 2>&1 || ret=1
+lines=$(grep -c CNAME test.out.$n)
+echo $lines
+[ "$lines" -eq 1 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status+ret))
+
+echo_i "exit status: $status"
+[ $status -eq 0 ] || exit 1