summaryrefslogtreecommitdiffstats
path: root/bin/tests/system/doth/tests.sh
diff options
context:
space:
mode:
Diffstat (limited to 'bin/tests/system/doth/tests.sh')
-rw-r--r--bin/tests/system/doth/tests.sh889
1 files changed, 889 insertions, 0 deletions
diff --git a/bin/tests/system/doth/tests.sh b/bin/tests/system/doth/tests.sh
new file mode 100644
index 0000000..a95bd8c
--- /dev/null
+++ b/bin/tests/system/doth/tests.sh
@@ -0,0 +1,889 @@
+#!/bin/sh
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+set -e
+
+# shellcheck disable=SC1091
+. ../conf.sh
+
+common_dig_options="+noadd +nosea +nostat +noquest +nocmd"
+msg_xfrs_not_allowed=";; zone transfers over the established TLS connection are not allowed"
+msg_peer_verification_failed=";; TLS peer certificate verification"
+
+ca_file="./CA/CA.pem"
+
+if [ -x "$PYTHON" ]; then
+ OPENSSL_VERSION=$("$PYTHON" "$TOP_SRCDIR/bin/tests/system/doth/get_openssl_version.py")
+ OPENSSL_VERSION_MAJOR=$(echo "$OPENSSL_VERSION" | cut -d ' ' -f 1)
+ OPENSSL_VERSION_MINOR=$(echo "$OPENSSL_VERSION" | cut -d ' ' -f 2)
+fi
+
+# According to the RFC 8310, Section 8.1, Subject field MUST
+# NOT be inspected when verifying a hostname when using
+# DoT. Only SubjectAltName must be checked instead. That is
+# not the case for HTTPS, though.
+
+# Unfortunately, some quite old versions of OpenSSL (< 1.1.1)
+# might lack the functionality to implement that. It should
+# have very little real-world consequences, as most of the
+# production-ready certificates issued by real CAs will have
+# SubjectAltName set. In such a case, the Subject field is
+# ignored.
+#
+# On the platforms with too old TLS versions, e.g. RedHat 7, we should
+# ignore the tests checking the correct handling of absence of
+# SubjectAltName.
+if [ -n "$OPENSSL_VERSION" ]; then
+ if [ $OPENSSL_VERSION_MAJOR -gt 1 ]; then
+ run_san_tests=1
+ elif [ $OPENSSL_VERSION_MAJOR -eq 1 ] && [ $OPENSSL_VERSION_MINOR -ge 1 ]; then
+ run_san_tests=1
+ fi
+fi
+
+dig_with_tls_opts() {
+ # shellcheck disable=SC2086
+ "$DIG" +tls $common_dig_options -p "${TLSPORT}" "$@"
+}
+
+dig_with_https_opts() {
+ # shellcheck disable=SC2086
+ "$DIG" +https $common_dig_options -p "${HTTPSPORT}" "$@"
+}
+
+dig_with_http_opts() {
+ # shellcheck disable=SC2086
+ "$DIG" +http-plain $common_dig_options -p "${HTTPPORT}" "$@"
+}
+
+dig_with_opts() {
+ # shellcheck disable=SC2086
+ "$DIG" $common_dig_options -p "${PORT}" "$@"
+}
+
+wait_for_tls_xfer() (
+ srv_number="$1"
+ shift
+ zone_name="$1"
+ shift
+ # Let's bind to .10 to make it possible to easily distinguish dig from NSs in packet traces
+ dig_with_tls_opts -b 10.53.0.10 "@10.53.0.$srv_number" "${zone_name}." AXFR > "dig.out.ns$srv_number.${zone_name}.test$n" || return 1
+ grep "^;" "dig.out.ns$srv_number.${zone_name}.test$n" > /dev/null && return 1
+ return 0
+)
+
+status=0
+n=0
+
+n=$((n+1))
+echo_i "testing XoT server functionality (using dig) ($n)"
+ret=0
+dig_with_tls_opts example. -b 10.53.0.10 @10.53.0.1 axfr > dig.out.ns1.test$n || ret=1
+grep "^;" dig.out.ns1.test$n | cat_i
+digcomp example.axfr.good dig.out.ns1.test$n || ret=1
+if test $ret != 0 ; then echo_i "failed"; fi
+status=$((status+ret))
+
+n=$((n+1))
+echo_i "testing incoming XoT functionality (from the first secondary) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 2 example; then
+ digcomp example.axfr.good "dig.out.ns2.example.test$n" || ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+ grep "^;" "dig.out.ns2.example.test$n" | cat_i
+ ret=1
+fi
+if test $ret != 0 ; then echo_i "failed"; fi
+status=$((status+ret))
+
+if [ -n "$run_san_tests" ]; then
+ n=$((n + 1))
+ echo_i "testing incoming XoT functionality (from the first secondary, no SubjectAltName, failure expected) ($n)"
+ ret=0
+ if retry_quiet 10 wait_for_tls_xfer 2 example3; then
+ ret=1
+ else
+ echo_i "timed out waiting for zone transfer"
+ fi
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+fi
+
+n=$((n + 1))
+echo_i "testing incoming XoT functionality (from the first secondary, StrictTLS via implicit IP) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 2 example4; then
+ retry_quiet 5 test -f "ns2/example4.db" || ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+ grep "^;" "dig.out.ns2.example4.test$n" | cat_i
+ ret=1
+fi
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing incoming XoT functionality (from the first secondary, StrictTLS via specified IPv4) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 2 example5; then
+ retry_quiet 5 test -f "ns2/example5.db" || ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+ grep "^;" "dig.out.ns2.example5.test$n" | cat_i
+ ret=1
+fi
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing incoming XoT functionality (from the first secondary, StrictTLS via specified IPv6) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 2 example6; then
+ retry_quiet 5 test -f "ns2/example6.db" || ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+ grep "^;" "dig.out.ns2.example6.test$n" | cat_i
+ ret=1
+fi
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing incoming XoT functionality (from the first secondary, wrong hostname, failure expected) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 2 example7; then
+ ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+fi
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing incoming XoT functionality (from the first secondary, expired certificate, failure expected) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 2 example8; then
+ ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+fi
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing incoming XoT functionality (from the first secondary, MutualTLS) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 2 example9; then
+ retry_quiet 5 test -f "ns2/example9.db" || ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+ grep "^;" "dig.out.ns2.example9.test$n" | cat_i
+ ret=1
+fi
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing incoming XoT functionality (from the first secondary, MutualTLS, no client cert, failure expected) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 2 example10; then
+ ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+fi
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing incoming XoT functionality (from the first secondary, MutualTLS, expired client cert, failure expected) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 2 example11; then
+ ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+fi
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n+1))
+echo_i "testing incoming XoT functionality (from the second secondary) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 3 example; then
+ digcomp example.axfr.good "dig.out.ns3.example.test$n" || ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+ grep "^;" "dig.out.ns3.example.test$n" | cat_i
+ ret=1
+fi
+if test $ret != 0 ; then echo_i "failed"; fi
+status=$((status+ret))
+
+n=$((n+1))
+echo_i "testing incoming XoT functionality (from the second secondary, mismatching ciphers, failure expected) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 3 example2; then
+ ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+fi
+if test $ret != 0 ; then echo_i "failed"; fi
+status=$((status+ret))
+
+n=$((n+1))
+echo_i "testing incoming XoT functionality (from the third secondary) ($n)"
+ret=0
+if retry_quiet 10 wait_for_tls_xfer 4 example; then
+ digcomp example.axfr.good "dig.out.ns4.example.test$n" || ret=1
+else
+ echo_i "timed out waiting for zone transfer"
+ grep "^;" "dig.out.ns4.example.test$n" | cat_i
+ ret=1
+fi
+if test $ret != 0 ; then echo_i "failed"; fi
+status=$((status+ret))
+
+n=$((n + 1))
+echo_i "checking DoT query (ephemeral key) ($n)"
+ret=0
+dig_with_tls_opts @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoT query via IPv6 (ephemeral key) ($n)"
+ret=0
+dig_with_tls_opts -6 @fd92:7065:b8e:ffff::1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoT query (static key) ($n)"
+ret=0
+dig_with_tls_opts @10.53.0.2 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoT query via IPv6 (static key) ($n)"
+ret=0
+dig_with_tls_opts -6 @fd92:7065:b8e:ffff::2 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoT XFR ($n)"
+ret=0
+dig_with_tls_opts +comm @10.53.0.1 . AXFR > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# zone transfers are allowed only via TLS
+n=$((n+1))
+echo_i "testing zone transfer over Do53 server functionality (using dig, failure expected) ($n)"
+ret=0
+dig_with_opts example. -b 10.53.0.10 @10.53.0.1 axfr > dig.out.ns1.test$n || ret=1
+grep "; Transfer failed." dig.out.ns1.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# querying zones is still allowed via UDP/TCP
+n=$((n + 1))
+echo_i "checking Do53 query ($n)"
+ret=0
+dig_with_opts @10.53.0.1 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# In this test we are trying to establish a DoT connection over the
+# DoH port. That is intentional, as dig should fail right after
+# handshake has happened and before sending any queries, as XFRs, per
+# the RFC, could happen only over a connection where "dot" ALPN token
+# was negotiated. over DoH it cannot happen, as only "h2" token could
+# be selected for a DoH connection.
+n=$((n + 1))
+echo_i "checking DoT XFR with wrong ALPN token (h2, failure expected) ($n)"
+ret=0
+# shellcheck disable=SC2086
+"$DIG" +tls $common_dig_options -p "${HTTPSPORT}" +comm @10.53.0.1 . AXFR > dig.out.test$n
+grep "$msg_xfrs_not_allowed" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# Let's try to issue an HTTP/2 query over TLS port to check if dig
+# will detect ALPN token negotiation problem.
+n=$((n + 1))
+echo_i "checking DoH query when ALPN is expected to fail (dot, failure expected) ($n)"
+ret=0
+# shellcheck disable=SC2086
+"$DIG" +https $common_dig_options -p "${TLSPORT}" "$@" @10.53.0.1 . SOA > dig.out.test$n && ret=1
+grep "ALPN for HTTP/2 failed." dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (POST) ($n)"
+ret=0
+dig_with_https_opts +stat @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep -F "(HTTPS)" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 (POST) ($n)"
+ret=0
+dig_with_https_opts +stat -6 @fd92:7065:b8e:ffff::1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep -F "(HTTPS)" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (POST, static key) ($n)"
+ret=0
+dig_with_https_opts @10.53.0.2 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 (POST, static key) ($n)"
+ret=0
+dig_with_https_opts -6 @fd92:7065:b8e:ffff::2 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (POST, nonstandard endpoint) ($n)"
+ret=0
+dig_with_https_opts +https=/alter @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 (POST, nonstandard endpoint) ($n)"
+ret=0
+dig_with_https_opts -6 +https=/alter @fd92:7065:b8e:ffff::1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (POST, undefined endpoint, failure expected) ($n)"
+ret=0
+dig_with_https_opts +tries=1 +time=1 +https=/fake @10.53.0.1 . SOA > dig.out.test$n && ret=1
+grep "communications error" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 (POST, undefined endpoint, failure expected) ($n)"
+ret=0
+dig_with_https_opts -6 +tries=1 +time=1 +https=/fake @fd92:7065:b8e:ffff::1 . SOA > dig.out.test$n && ret=1
+grep "communications error" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH XFR (POST) (failure expected) ($n)"
+ret=0
+dig_with_https_opts +comm @10.53.0.1 . AXFR > dig.out.test$n || ret=1
+grep "; Transfer failed." dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (GET) ($n)"
+ret=0
+dig_with_https_opts +stat +https-get @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep -F "(HTTPS-GET)" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 (GET) ($n)"
+ret=0
+dig_with_https_opts -6 +stat +https-get @fd92:7065:b8e:ffff::1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep -F "(HTTPS-GET)" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (GET, static key) ($n)"
+ret=0
+dig_with_https_opts +https-get @10.53.0.2 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 (GET, static key) ($n)"
+ret=0
+dig_with_https_opts -6 +https-get @fd92:7065:b8e:ffff::2 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (GET, nonstandard endpoint) ($n)"
+ret=0
+dig_with_https_opts +https-get=/alter @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 (GET, nonstandard endpoint) ($n)"
+ret=0
+dig_with_https_opts -6 +https-get=/alter @fd92:7065:b8e:ffff::1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (GET, undefined endpoint, failure expected) ($n)"
+ret=0
+dig_with_https_opts +tries=1 +time=1 +https-get=/fake @10.53.0.1 . SOA > dig.out.test$n && ret=1
+grep "communications error" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 (GET, undefined endpoint, failure expected) ($n)"
+ret=0
+dig_with_https_opts -6 +tries=1 +time=1 +https-get=/fake @fd92:7065:b8e:ffff::1 . SOA > dig.out.test$n && ret=1
+grep "communications error" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH XFR (GET) (failure expected) ($n)"
+ret=0
+dig_with_https_opts +https-get +comm @10.53.0.1 . AXFR > dig.out.test$n || ret=1
+grep "; Transfer failed." dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking unencrypted DoH query (POST) ($n)"
+ret=0
+dig_with_http_opts +stat @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep -F "(HTTP)" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking unencrypted DoH query via IPv6 (POST) ($n)"
+ret=0
+dig_with_http_opts -6 +stat @fd92:7065:b8e:ffff::1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep -F "(HTTP)" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking unencrypted DoH query (GET) ($n)"
+ret=0
+dig_with_http_opts +stat +http-plain-get @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep -F "(HTTP-GET)" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking unencrypted DoH query via IPv6 (GET) ($n)"
+ret=0
+dig_with_http_opts -6 +stat +http-plain-get @fd92:7065:b8e:ffff::1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep -F "(HTTP-GET)" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking unencrypted DoH XFR (failure expected) ($n)"
+ret=0
+dig_with_http_opts +comm @10.53.0.1 . AXFR > dig.out.test$n || ret=1
+grep "; Transfer failed." dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query for a large answer (POST) ($n)"
+ret=0
+dig_with_https_opts @10.53.0.1 biganswer.example A > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep "ANSWER: 2500" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 for a large answer (POST) ($n)"
+ret=0
+dig_with_https_opts -6 @fd92:7065:b8e:ffff::1 biganswer.example A > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep "ANSWER: 2500" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query for a large answer (GET) ($n)"
+ret=0
+dig_with_https_opts +https-get @10.53.0.1 biganswer.example A > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep "ANSWER: 2500" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query via IPv6 for a large answer (GET) ($n)"
+ret=0
+dig_with_https_opts -6 +https-get @fd92:7065:b8e:ffff::1 biganswer.example A > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep "ANSWER: 2500" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking unencrypted DoH query for a large answer (POST) ($n)"
+ret=0
+dig_with_http_opts @10.53.0.1 biganswer.example A > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep "ANSWER: 2500" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking unencrypted DoH query via IPv6 for a large answer (POST) ($n)"
+ret=0
+dig_with_http_opts -6 @fd92:7065:b8e:ffff::1 biganswer.example A > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep "ANSWER: 2500" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking unencrypted DoH query for a large answer (GET) ($n)"
+ret=0
+dig_with_http_opts +http-plain-get @10.53.0.1 biganswer.example A > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep "ANSWER: 2500" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking unencrypted DoH query via IPv6 for a large answer (GET) ($n)"
+ret=0
+dig_with_http_opts -6 +http-plain-get @fd92:7065:b8e:ffff::1 biganswer.example A > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+grep "ANSWER: 2500" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+wait_for_tlsctx_update_ns4 () {
+ grep "updating TLS context on 10.53.0.4#${HTTPSPORT}" ns4/named.run > /dev/null || return 1
+ grep "updating TLS context on 10.53.0.4#${TLSPORT}" ns4/named.run > /dev/null || return 1
+ return 0
+}
+
+n=$((n + 1))
+echo_i "doing rndc reconfig to see that queries keep being served after that ($n)"
+ret=0
+rndc_reconfig ns4 10.53.0.4 60
+retry_quiet 15 wait_for_tlsctx_update_ns4 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoT query after a reconfiguration ($n)"
+ret=0
+dig_with_tls_opts @10.53.0.4 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (POST) after a reconfiguration ($n)"
+ret=0
+dig_with_https_opts @10.53.0.4 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "doing rndc reconfig to see if HTTP endpoints have gotten reconfigured ($n)"
+ret=0
+# 'sed -i ...' is not portable. Sigh...
+sed 's/\/dns-query/\/dns-query-test/g' "ns4/named.conf" > "ns4/named.conf.sed"
+mv -f "ns4/named.conf.sed" "ns4/named.conf"
+rndc_reconfig ns4 10.53.0.4 60
+retry_quiet 15 wait_for_tlsctx_update_ns4 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (POST) to verify HTTP endpoint reconfiguration ($n)"
+ret=0
+dig_with_https_opts +https='/dns-query-test' @10.53.0.4 example SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoT query (with TLS verification enabled) ($n)"
+ret=0
+dig_with_tls_opts +tls-ca="$ca_file" +tls-hostname="srv01.crt01.example.com" @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (with TLS verification enabled, self-signed cert, failure expected) ($n)"
+ret=0
+dig_with_https_opts +tls-ca="$ca_file" +tls-hostname="srv01.crt01.example.com" @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "$msg_peer_verification_failed" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoT query (with TLS verification using the system's CA store, failure expected) ($n)"
+ret=0
+dig_with_tls_opts +tls-ca +tls-hostname="srv01.crt01.example.com" @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "$msg_peer_verification_failed" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (with TLS verification using the system's CA store, failure expected) ($n)"
+ret=0
+dig_with_https_opts +tls-ca +tls-hostname="srv01.crt01.example.com" @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "$msg_peer_verification_failed" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# the primary server's certificate contains the IP address in the
+# SubjectAltName section
+n=$((n + 1))
+echo_i "checking DoT query (with TLS verification, hostname is not specified, IP address is used instead) ($n)"
+ret=0
+dig_with_tls_opts +tls-ca="$ca_file" @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "$msg_peer_verification_failed" dig.out.test$n > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+if [ -n "$run_san_tests" ]; then
+ # SubjectAltName is required for DoT as according to RFC 8310, Subject
+ # field MUST NOT be inspected when verifying hostname for DoT.
+ n=$((n + 1))
+ echo_i "checking DoT query (with TLS verification enabled when SubjectAltName is not set, failure expected) ($n)"
+ ret=0
+ dig_with_tls_opts +tls-ca="$ca_file" +tls-hostname="srv01.crt02-no-san.example.com" @10.53.0.1 . SOA > dig.out.test$n || ret=1
+ grep "$msg_peer_verification_failed" dig.out.test$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+
+ n=$((n + 1))
+ echo_i "checking DoT XFR over a TLS port where SubjectAltName is not set (failure expected) ($n)"
+ ret=0
+ # shellcheck disable=SC2086
+ dig_with_tls_opts +tls-ca="$ca_file" +tls-hostname="srv01.crt02-no-san.example.com" -p "${EXTRAPORT2}" +comm @10.53.0.1 . AXFR > dig.out.test$n || ret=1
+ grep "$msg_peer_verification_failed" dig.out.test$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+fi
+
+# SubjectAltName is not required for HTTPS. Having a properly set
+# Common Name in the Subject field is enough.
+n=$((n + 1))
+echo_i "checking DoH query (when SubjectAltName is not set) ($n)"
+ret=0
+dig_with_https_opts +tls-ca="$ca_file" +tls-hostname="srv01.crt02-no-san.example.com" -p "${EXTRAPORT3}" +comm @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoT query (expired certificate, Opportunistic TLS) ($n)"
+ret=0
+dig_with_tls_opts +tls -p "${EXTRAPORT4}" +comm @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoT query (expired certificate, Strict TLS, failure expected) ($n)"
+ret=0
+dig_with_tls_opts +tls-ca="$ca_file" -p "${EXTRAPORT4}" +comm @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "$msg_peer_verification_failed" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n+1))
+echo_i "testing XoT server functionality (using dig, client certificate required, failure expected) ($n)"
+ret=0
+dig_with_tls_opts +tls-ca="$ca_file" -p "${EXTRAPORT5}" example8. -b 10.53.0.10 @10.53.0.1 axfr > dig.out.ns1.test$n || ret=1
+grep "; Transfer failed." dig.out.ns1.test$n > /dev/null || ret=1
+if test $ret != 0 ; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n+1))
+echo_i "testing XoT server functionality (using dig, client certificate used) ($n)"
+ret=0
+dig_with_tls_opts +tls-ca="$ca_file" +tls-certfile="./CA/certs/srv01.client01.example.com.pem" +tls-keyfile="./CA/certs/srv01.client01.example.com.key" -p "${EXTRAPORT5}" example8. -b 10.53.0.10 @10.53.0.1 axfr > dig.out.ns1.test$n || ret=1
+digcomp dig.out.ns1.test$n example8.axfr.good > /dev/null || ret=1
+if test $ret != 0 ; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (client certificate required, failure expected) ($n)"
+ret=0
+dig_with_https_opts +tls-ca="$ca_file" -p "${EXTRAPORT6}" +comm @10.53.0.1 . SOA > dig.out.test$n && ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking DoH query (client certificate used) ($n)"
+ret=0
+# shellcheck disable=SC2086
+dig_with_https_opts +https +tls-ca="$ca_file" +tls-certfile="./CA/certs/srv01.client01.example.com.pem" +tls-keyfile="./CA/certs/srv01.client01.example.com.key" -p "${EXTRAPORT6}" +comm @10.53.0.1 . SOA > dig.out.test$n || ret=1
+grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# send two requests one after another so that session resumption will happen
+n=$((n + 1))
+echo_i "checking DoH query (client certificate used - session resumption when using Mutual TLS) ($n)"
+ret=0
+# shellcheck disable=SC2086
+dig_with_https_opts +https +tls-ca="$ca_file" +tls-certfile="./CA/certs/srv01.client01.example.com.pem" +tls-keyfile="./CA/certs/srv01.client01.example.com.key" -p "${EXTRAPORT6}" +comm @10.53.0.1 . SOA . SOA > dig.out.test$n || ret=1
+grep "TLS error" dig.out.test$n > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+test_opcodes() {
+ EXPECT_STATUS="$1"
+ shift
+ for op in "$@";
+ do
+ n=$((n + 1))
+ echo_i "checking unexpected opcode query over DoH for opcode $op ($n)"
+ ret=0
+ dig_with_https_opts +https @10.53.0.1 +opcode="$op" > dig.out.test$n || ret=1
+ grep "status: $EXPECT_STATUS" dig.out.test$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+
+ n=$((n + 1))
+ echo_i "checking unexpected opcode query over DoH via IPv6 for opcode $op ($n)"
+ ret=0
+ dig_with_https_opts -6 +https @fd92:7065:b8e:ffff::1 +opcode="$op" > dig.out.test$n || ret=1
+ grep "status: $EXPECT_STATUS" dig.out.test$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+
+ n=$((n + 1))
+ echo_i "checking unexpected opcode query over DoH without encryption for opcode $op ($n)"
+ ret=0
+ dig_with_http_opts +http-plain @10.53.0.1 +opcode="$op" > dig.out.test$n || ret=1
+ grep "status: $EXPECT_STATUS" dig.out.test$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+
+ n=$((n + 1))
+ echo_i "checking unexpected opcode query over DoH via IPv6 without encryption for opcode $op ($n)"
+ ret=0
+ dig_with_http_opts -6 +http-plain @fd92:7065:b8e:ffff::1 +opcode="$op" > dig.out.test$n || ret=1
+ grep "status: $EXPECT_STATUS" dig.out.test$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+
+ n=$((n + 1))
+ echo_i "checking unexpected opcode query over DoT for opcode $op ($n)"
+ ret=0
+ dig_with_tls_opts +tls @10.53.0.1 +opcode="$op" > dig.out.test$n || ret=1
+ grep "status: $EXPECT_STATUS" dig.out.test$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+
+ n=$((n + 1))
+ echo_i "checking unexpected opcode query over DoT via IPv6 for opcode $op ($n)"
+ ret=0
+ dig_with_tls_opts -6 +tls @fd92:7065:b8e:ffff::1 +opcode="$op" > dig.out.test$n || ret=1
+ grep "status: $EXPECT_STATUS" dig.out.test$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+ done
+}
+
+test_opcodes NOERROR 0
+test_opcodes NOTIMP 1 2 3 6 7 8 9 10 11 12 13 14 15
+test_opcodes FORMERR 4 5
+
+n=$((n + 1))
+echo_i "checking server quotas for both encrypted and unencrypted HTTP ($n)"
+ret=0
+if [ -x "$PYTHON" ]; then
+ BINDHOST="10.53.0.1" "$PYTHON" "$TOP_SRCDIR/bin/tests/system/doth/stress_http_quota.py" || ret=$?
+else
+ echo_i "Python is not available. Skipping the test..."
+fi
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# check whether we can use curl for sending test queries.
+if [ -x "${CURL}" ] ; then
+ CURL_HTTP2="$(${CURL} --version | grep -E '^Features:.* HTTP2( |$)' || true)"
+
+ if [ -n "$CURL_HTTP2" ]; then
+ testcurl=1
+ else
+ echo_i "The available version of CURL does not have HTTP/2 support"
+ fi
+fi
+
+# Note: see README.curl for information on how to generate curl
+# queries.
+if [ -n "$testcurl" ]; then
+ n=$((n + 1))
+ echo_i "checking max-age for positive answer ($n)"
+ ret=0
+ # use curl to query for 'example/SOA'
+ $CURL -kD headers.$n "https://10.53.0.1:${HTTPSPORT}/dns-query?dns=AAEAAAABAAAAAAAAB2V4YW1wbGUAAAYAAQ" > /dev/null 2>&1 || ret=1
+ grep "cache-control: max-age=86400" headers.$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+
+ n=$((n + 1))
+ echo_i "checking max-age for negative answer ($n)"
+ ret=0
+ # use curl to query for 'fake.example/TXT'
+ $CURL -kD headers.$n "https://10.53.0.1:${HTTPSPORT}/dns-query?dns=AAEAAAABAAAAAAAABGZha2UHZXhhbXBsZQAAEAAB" > /dev/null 2>&1 || ret=1
+ grep "cache-control: max-age=3600" headers.$n > /dev/null || ret=1
+ if [ $ret != 0 ]; then echo_i "failed"; fi
+ status=$((status + ret))
+fi
+
+echo_i "exit status: $status"
+[ $status -eq 0 ] || exit 1
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-03 20:05:51 +0000