diff options
Diffstat (limited to 'bin/tests/system/xfer/tests.sh')
| -rwxr-xr-x | bin/tests/system/xfer/tests.sh | 627 |
1 files changed, 627 insertions, 0 deletions
diff --git a/bin/tests/system/xfer/tests.sh b/bin/tests/system/xfer/tests.sh new file mode 100755 index 0000000..f012d8b --- /dev/null +++ b/bin/tests/system/xfer/tests.sh @@ -0,0 +1,627 @@ +#!/bin/sh + +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. + +set -e + +. ../conf.sh + +DIGOPTS="+tcp +noadd +nosea +nostat +noquest +nocomm +nocmd -p ${PORT}" +RNDCCMD="$RNDC -c ../common/rndc.conf -p ${CONTROLPORT} -s" +NS_PARAMS="-X named.lock -m record -c named.conf -d 99 -g -U 4 -T maxcachesize=2097152" + +status=0 +n=0 + +n=$((n+1)) +echo_i "testing basic zone transfer functionality (from primary) ($n)" +tmp=0 +$DIG $DIGOPTS example. @10.53.0.2 axfr > dig.out.ns2.test$n || tmp=1 +grep "^;" dig.out.ns2.test$n | cat_i +digcomp dig1.good dig.out.ns2.test$n || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "testing basic zone transfer functionality (from secondary) ($n)" +tmp=0 +# +# Spin to allow the zone to transfer. +# +wait_for_xfer () { + ZONE=$1 + SERVER=$2 + $DIG $DIGOPTS $ZONE @$SERVER axfr > dig.out.test$n || return 1 + grep "^;" dig.out.test$n > /dev/null && return 1 + return 0 +} +retry_quiet 25 wait_for_xfer example. 10.53.0.3 || tmp=1 +grep "^;" dig.out.test$n | cat_i +digcomp dig1.good dig.out.test$n || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "testing zone transfer functionality (fallback to DNS after DoT failed) ($n)" +tmp=0 +retry_quiet 25 wait_for_xfer dot-fallback. 10.53.0.2 || tmp=1 +grep "^;" dig.out.test$n | cat_i +digcomp dig3.good dig.out.test$n || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "testing TSIG signed zone transfers ($n)" +tmp=0 +$DIG $DIGOPTS tsigzone. @10.53.0.2 axfr -y tsigzone.:1234abcd8765 > dig.out.ns2.test$n || tmp=1 +grep "^;" dig.out.ns2.test$n | cat_i + +# +# Spin to allow the zone to transfer. +# +wait_for_xfer_tsig () { + $DIG $DIGOPTS tsigzone. @10.53.0.3 axfr -y tsigzone.:1234abcd8765 > dig.out.ns3.test$n || return 1 + grep "^;" dig.out.ns3.test$n > /dev/null && return 1 + return 0 +} +retry_quiet 25 wait_for_xfer_tsig || tmp=1 +grep "^;" dig.out.ns3.test$n | cat_i +digcomp dig.out.ns2.test$n dig.out.ns3.test$n || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +echo_i "reload servers for in preparation for ixfr-from-differences tests" + +rndc_reload ns1 10.53.0.1 +rndc_reload ns2 10.53.0.2 +rndc_reload ns3 10.53.0.3 +rndc_reload ns6 10.53.0.6 +rndc_reload ns7 10.53.0.7 + +sleep 2 + +echo_i "updating primary zones for ixfr-from-differences tests" + +$PERL -i -p -e ' + s/0\.0\.0\.0/0.0.0.1/; + s/1397051952/1397051953/ +' ns1/sec.db + +rndc_reload ns1 10.53.0.1 + +$PERL -i -p -e ' + s/0\.0\.0\.0/0.0.0.1/; + s/1397051952/1397051953/ +' ns2/example.db + +rndc_reload ns2 10.53.0.2 + +$PERL -i -p -e ' + s/0\.0\.0\.0/0.0.0.1/; + s/1397051952/1397051953/ +' ns6/primary.db + +rndc_reload ns6 10.53.0.6 + +$PERL -i -p -e ' + s/0\.0\.0\.0/0.0.0.1/; + s/1397051952/1397051953/ +' ns7/primary2.db + +rndc_reload ns7 10.53.0.7 + +sleep 3 + +n=$((n+1)) +echo_i "testing zone is dumped after successful transfer ($n)" +tmp=0 +$DIG $DIGOPTS +noall +answer +multi @10.53.0.2 \ + secondary. soa > dig.out.ns2.test$n || tmp=1 +grep "1397051952 ; serial" dig.out.ns2.test$n > /dev/null 2>&1 || tmp=1 +grep "1397051952 ; serial" ns2/sec.db > /dev/null 2>&1 || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "testing ixfr-from-differences yes; ($n)" +tmp=0 + +echo_i "wait for reloads..." +wait_for_reloads() ( + $DIG $DIGOPTS @10.53.0.6 +noall +answer soa primary > dig.out.soa1.ns6.test$n + grep "1397051953" dig.out.soa1.ns6.test$n > /dev/null || return 1 + $DIG $DIGOPTS @10.53.0.1 +noall +answer soa secondary > dig.out.soa2.ns1.test$n + grep "1397051953" dig.out.soa2.ns1.test$n > /dev/null || return 1 + $DIG $DIGOPTS @10.53.0.2 +noall +answer soa example > dig.out.soa3.ns2.test$n + grep "1397051953" dig.out.soa3.ns2.test$n > /dev/null || return 1 + return 0 +) +retry_quiet 20 wait_for_reloads || tmp=1 + +echo_i "wait for transfers..." +wait_for_transfers() ( + a=0 b=0 c=0 d=0 + $DIG $DIGOPTS @10.53.0.3 +noall +answer soa example > dig.out.soa1.ns3.test$n + grep "1397051953" dig.out.soa1.ns3.test$n > /dev/null && a=1 + $DIG $DIGOPTS @10.53.0.3 +noall +answer soa primary > dig.out.soa2.ns3.test$n + grep "1397051953" dig.out.soa2.ns3.test$n > /dev/null && b=1 + $DIG $DIGOPTS @10.53.0.6 +noall +answer soa secondary > dig.out.soa3.ns6.test$n + grep "1397051953" dig.out.soa3.ns6.test$n > /dev/null && c=1 + [ $a -eq 1 -a $b -eq 1 -a $c -eq 1 ] && return 0 + + # re-notify if necessary + $RNDCCMD 10.53.0.6 notify primary 2>&1 | sed 's/^/ns6 /' | cat_i + $RNDCCMD 10.53.0.1 notify secondary 2>&1 | sed 's/^/ns1 /' | cat_i + $RNDCCMD 10.53.0.2 notify example 2>&1 | sed 's/^/ns2 /' | cat_i + return 1 +) +retry_quiet 20 wait_for_transfers || tmp=1 + +$DIG $DIGOPTS example. \ + @10.53.0.3 axfr > dig.out.ns3.test$n || tmp=1 +grep "^;" dig.out.ns3.test$n | cat_i + +digcomp dig2.good dig.out.ns3.test$n || tmp=1 + +# ns3 has a journal iff it received an IXFR. +test -f ns3/example.bk || tmp=1 +test -f ns3/example.bk.jnl || tmp=1 + +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "testing ixfr-from-differences primary; (primary zone) ($n)" +tmp=0 + +$DIG $DIGOPTS primary. \ + @10.53.0.6 axfr > dig.out.ns6.test$n || tmp=1 +grep "^;" dig.out.ns6.test$n | cat_i + +$DIG $DIGOPTS primary. \ + @10.53.0.3 axfr > dig.out.ns3.test$n || tmp=1 +grep "^;" dig.out.ns3.test$n > /dev/null && cat_i < dig.out.ns3.test$n + +digcomp dig.out.ns6.test$n dig.out.ns3.test$n || tmp=1 + +# ns3 has a journal iff it received an IXFR. +test -f ns3/primary.bk || tmp=1 +test -f ns3/primary.bk.jnl || tmp=1 + +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "testing ixfr-from-differences primary; (secondary zone) ($n)" +tmp=0 + +$DIG $DIGOPTS secondary. \ + @10.53.0.6 axfr > dig.out.ns6.test$n || tmp=1 +grep "^;" dig.out.ns6.test$n | cat_i + +$DIG $DIGOPTS secondary. \ + @10.53.0.1 axfr > dig.out.ns1.test$n || tmp=1 +grep "^;" dig.out.ns1.test$n | cat_i + +digcomp dig.out.ns6.test$n dig.out.ns1.test$n || tmp=1 + +# ns6 has a journal iff it received an IXFR. +test -f ns6/sec.bk || tmp=1 +test -f ns6/sec.bk.jnl && tmp=1 + +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "testing ixfr-from-differences secondary; (secondary zone) ($n)" +tmp=0 + +# ns7 has a journal iff it generates an IXFR. +test -f ns7/primary2.db || tmp=1 +test -f ns7/primary2.db.jnl && tmp=1 + +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "testing ixfr-from-differences secondary; (secondary zone) ($n)" +tmp=0 + +$DIG $DIGOPTS secondary. \ + @10.53.0.1 axfr > dig.out.ns1.test$n || tmp=1 +grep "^;" dig.out.ns1.test$n | cat_i + +$DIG $DIGOPTS secondary. \ + @10.53.0.7 axfr > dig.out.ns7.test$n || tmp=1 +grep "^;" dig.out.ns7.test$n | cat_i + +digcomp dig.out.ns7.test$n dig.out.ns1.test$n || tmp=1 + +# ns7 has a journal iff it generates an IXFR. +test -f ns7/sec.bk || tmp=1 +test -f ns7/sec.bk.jnl || tmp=1 + +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "check that a multi-message uncompressable zone transfers ($n)" +$DIG axfr . -p ${PORT} @10.53.0.4 | grep SOA > axfr.out +if test $(wc -l < axfr.out) != 2 +then + echo_i "failed" + status=$((status+1)) +fi + +# now we test transfers with assorted TSIG glitches +DIGCMD="$DIG $DIGOPTS @10.53.0.4" + +sendcmd() { + send 10.53.0.5 "$EXTRAPORT1" +} + +echo_i "testing that incorrectly signed transfers will fail..." +n=$((n+1)) +echo_i "initial correctly-signed transfer should succeed ($n)" + +sendcmd < ans5/goodaxfr + +# Initially, ns4 is not authoritative for anything. +# Now that ans is up and running with the right data, we make ns4 +# a secondary for nil. + +cat <<EOF >>ns4/named.conf +zone "nil" { + type secondary; + file "nil.db"; + primaries { 10.53.0.5 key tsig_key; }; +}; +EOF + +nextpart ns4/named.run >/dev/null + +rndc_reload ns4 10.53.0.4 + +wait_for_soa() ( + $DIGCMD nil. SOA > dig.out.ns4.test$n + grep SOA dig.out.ns4.test$n > /dev/null +) +retry_quiet 10 wait_for_soa + +nextpart ns4/named.run | grep "Transfer status: success" > /dev/null || { + echo_i "failed: expected status was not logged" + status=$((status+1)) +} + +$DIGCMD nil. TXT | grep 'initial AXFR' >/dev/null || { + echo_i "failed" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "unsigned transfer ($n)" + +sendcmd < ans5/unsigned +sleep 1 + +$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i + +sleep 2 + +nextpart ns4/named.run | grep "Transfer status: expected a TSIG or SIG(0)" > /dev/null || { + echo_i "failed: expected status was not logged" + status=$((status+1)) +} + +$DIGCMD nil. TXT | grep 'unsigned AXFR' >/dev/null && { + echo_i "failed" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "bad keydata ($n)" + +sendcmd < ans5/badkeydata + +$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i + +sleep 2 + +nextpart ns4/named.run | grep "Transfer status: tsig verify failure" > /dev/null || { + echo_i "failed: expected status was not logged" + status=$((status+1)) +} + +$DIGCMD nil. TXT | grep 'bad keydata AXFR' >/dev/null && { + echo_i "failed" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "partially-signed transfer ($n)" + +sendcmd < ans5/partial + +$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i + +sleep 2 + +nextpart ns4/named.run | grep "Transfer status: expected a TSIG or SIG(0)" > /dev/null || { + echo_i "failed: expected status was not logged" + status=$((status+1)) +} + +$DIGCMD nil. TXT | grep 'partially signed AXFR' >/dev/null && { + echo_i "failed" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "unknown key ($n)" + +sendcmd < ans5/unknownkey + +$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i + +sleep 2 + +nextpart ns4/named.run | grep "tsig key 'tsig_key': key name and algorithm do not match" > /dev/null || { + echo_i "failed: expected status was not logged" + status=$((status+1)) +} + +$DIGCMD nil. TXT | grep 'unknown key AXFR' >/dev/null && { + echo_i "failed" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "incorrect key ($n)" + +sendcmd < ans5/wrongkey + +$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i + +sleep 2 + +nextpart ns4/named.run | grep "tsig key 'tsig_key': key name and algorithm do not match" > /dev/null || { + echo_i "failed: expected status was not logged" + status=$((status+1)) +} + +$DIGCMD nil. TXT | grep 'incorrect key AXFR' >/dev/null && { + echo_i "failed" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "bad question section ($n)" + +sendcmd < ans5/wrongname + +$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i + +sleep 2 + +nextpart ns4/named.run | grep "question name mismatch" > /dev/null || { + echo_i "failed: expected status was not logged" + status=$((status+1)) +} + +$DIGCMD nil. TXT | grep 'wrong question AXFR' >/dev/null && { + echo_i "failed" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "bad message id ($n)" + +sendcmd < ans5/badmessageid + +# Uncomment to see AXFR stream with mismatching IDs. +# $DIG $DIGOPTS @10.53.0.5 -y tsig_key:LSAnCU+Z nil. AXFR +all + +$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i + +sleep 2 + +nextpart ns4/named.run | grep "unexpected message id" > /dev/null || { + echo_i "failed: expected status was not logged" + status=$((status+1)) +} + +$DIGCMD nil. TXT | grep 'bad message id' >/dev/null && { + echo_i "failed" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "mismatched SOA ($n)" + +sendcmd < ans5/soamismatch + +$RNDCCMD 10.53.0.4 retransfer nil | sed 's/^/ns4 /' | cat_i + +sleep 2 + +nextpart ns4/named.run | grep "Transfer status: FORMERR" > /dev/null || { + echo_i "failed: expected status was not logged" + status=$((status+1)) +} + +$DIGCMD nil. TXT | grep 'SOA mismatch AXFR' >/dev/null && { + echo_i "failed" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "check that we ask for and get a EDNS EXPIRE response ($n)" +# force a refresh query +$RNDCCMD 10.53.0.7 refresh edns-expire 2>&1 | sed 's/^/ns7 /' | cat_i +sleep 10 + +# there may be multiple log entries so get the last one. +expire=$(awk '/edns-expire\/IN: got EDNS EXPIRE of/ { x=$9 } END { print x }' ns7/named.run) +test ${expire:-0} -gt 0 -a ${expire:-0} -lt 1814400 || { + echo_i "failed (expire=${expire:-0})" + status=$((status+1)) +} + +n=$((n+1)) +echo_i "test smaller transfer TCP message size ($n)" +$DIG $DIGOPTS example. @10.53.0.8 axfr \ + -y key1.:1234abcd8765 > dig.out.msgsize.test$n || status=1 + +bytes=$(wc -c < dig.out.msgsize.test$n) +if [ $bytes -ne 459357 ]; then + echo_i "failed axfr size check" + status=$((status+1)) +fi + +num_messages=$(cat ns8/named.run | grep "sending TCP message of" | wc -l) +if [ $num_messages -le 300 ]; then + echo_i "failed transfer message count check" + status=$((status+1)) +fi + +n=$((n+1)) +echo_i "test mapped zone with out of zone data ($n)" +tmp=0 +$DIG -p ${PORT} txt mapped @10.53.0.3 > dig.out.1.test$n +grep "status: NOERROR," dig.out.1.test$n > /dev/null || tmp=1 +stop_server ns3 +start_server --noclean --restart --port ${PORT} ns3 +check_mapped () { + $DIG -p ${PORT} txt mapped @10.53.0.3 > dig.out.2.test$n + grep "status: NOERROR," dig.out.2.test$n > /dev/null || return 1 + $DIG -p ${PORT} axfr mapped @10.53.0.3 > dig.out.3.test$n + digcomp knowngood.mapped dig.out.3.test$n || return 1 + return 0 +} +retry_quiet 10 check_mapped || tmp=1 +[ "$tmp" -ne 0 ] && echo_i "failed" +status=$((status+tmp)) + +n=$((n+1)) +echo_i "test that a zone with too many records is rejected (AXFR) ($n)" +tmp=0 +grep "'axfr-too-big/IN'.*: too many records" ns6/named.run >/dev/null || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "test that a zone with too many records is rejected (IXFR) ($n)" +tmp=0 +nextpart ns6/named.run > /dev/null +$NSUPDATE << EOF +zone ixfr-too-big +server 10.53.0.1 ${PORT} +update add the-31st-record.ixfr-too-big 0 TXT this is it +send +EOF +msg="'ixfr-too-big/IN' from 10.53.0.1#${PORT}: Transfer status: too many records" +wait_for_log 10 "$msg" ns6/named.run || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "checking whether dig calculates AXFR statistics correctly ($n)" +tmp=0 +# Loop until the secondary server manages to transfer the "xfer-stats" zone so +# that we can both check dig output and immediately proceed with the next test. +# Use -b so that we can discern between incoming and outgoing transfers in ns3 +# logs later on. +wait_for_xfer() ( + $DIG $DIGOPTS +noedns +stat -b 10.53.0.2 @10.53.0.3 xfer-stats. AXFR > dig.out.ns3.test$n + grep "; Transfer failed" dig.out.ns3.test$n > /dev/null || return 0 + return 1 +) +if retry_quiet 10 wait_for_xfer; then + get_dig_xfer_stats dig.out.ns3.test$n > stats.dig + diff axfr-stats.good stats.dig || tmp=1 +else + echo_i "timed out waiting for zone transfer" +fi +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +# Note: in the next two tests, we use ns3 logs for checking both incoming and +# outgoing transfer statistics as ns3 is both a secondary server (for ns1) and a +# primary server (for dig queries from the previous test) for "xfer-stats". +n=$((n+1)) +echo_i "checking whether named calculates incoming AXFR statistics correctly ($n)" +tmp=0 +get_named_xfer_stats ns3/named.run 10.53.0.1 xfer-stats "Transfer completed" > stats.incoming +diff axfr-stats.good stats.incoming || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "checking whether named calculates outgoing AXFR statistics correctly ($n)" +tmp=0 +check_xfer_stats() { + get_named_xfer_stats ns3/named.run 10.53.0.2 xfer-stats "AXFR ended" > stats.outgoing + diff axfr-stats.good stats.outgoing > /dev/null +} +retry_quiet 10 check_xfer_stats || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +n=$((n+1)) +echo_i "test that transfer-source uses port option correctly ($n)" +tmp=0 +grep "10.53.0.3#${EXTRAPORT1} (primary): query 'primary/SOA/IN' approved" ns6/named.run > /dev/null || tmp=1 +if test $tmp != 0 ; then echo_i "failed"; fi +status=$((status+tmp)) + +wait_for_message() ( + nextpartpeek ns6/named.run > wait_for_message.$n + grep -F "$1" wait_for_message.$n >/dev/null +) + +nextpart ns6/named.run > /dev/null + +n=$((n+1)) +echo_i "test max-transfer-time-in with 1 second timeout ($n)" +stop_server ns1 +copy_setports ns1/named2.conf.in ns1/named.conf +start_server --noclean --restart --port ${PORT} ns1 -- "-D xfer-ns1 $NS_PARAMS -T transferinsecs -T transferslowly" +sleep 1 +$RNDCCMD 10.53.0.6 retransfer axfr-max-transfer-time 2>&1 | sed 's/^/ns6 /' | cat_i +tmp=0 +retry_quiet 10 wait_for_message "maximum transfer time exceeded: timed out" || tmp=1 +status=$((status+tmp)) + +nextpart ns6/named.run > /dev/null + +n=$((n+1)) +echo_i "test max-transfer-idle-in with 50 seconds timeout ($n)" +stop_server ns1 +copy_setports ns1/named3.conf.in ns1/named.conf +start_server --noclean --restart --port ${PORT} ns1 -- "-D xfer-ns1 $NS_PARAMS -T transferinsecs -T transferstuck" +sleep 1 +start=$(date +%s) +$RNDCCMD 10.53.0.6 retransfer axfr-max-idle-time 2>&1 | sed 's/^/ns6 /' | cat_i +tmp=0 +retry_quiet 60 wait_for_message "maximum idle time exceeded: timed out" || tmp=1 +if [ $tmp -eq 0 ]; then + now=$(date +%s) + diff=$((now - start)) + # we expect a timeout in 50 seconds + test $diff -lt 50 && tmp=1 + test $diff -ge 59 && tmp=1 + if test $tmp != 0 ; then echo_i "unexpected diff value: ${diff}"; fi +fi +status=$((status+tmp)) + +echo_i "exit status: $status" +[ $status -eq 0 ] || exit 1 |