Adding upstream version 16.2.11+ds.upstream/16.2.11+dsupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 132 insertions, 0 deletions

diff --git a/src/spdk/dpdk/app/test/test_memcpy.c b/src/spdk/dpdk/app/test/test_memcpy.c
new file mode 100644
index 000000000..1ab86f496
--- /dev/null
+++ b/src/spdk/dpdk/app/test/test_memcpy.c
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+
+#include <rte_common.h>
+#include <rte_random.h>
+#include <rte_memcpy.h>
+
+#include "test.h"
+
+/*
+ * Set this to the maximum buffer size you want to test. If it is 0, then the
+ * values in the buf_sizes[] array below will be used.
+ */
+#define TEST_VALUE_RANGE        0
+
+/* List of buffer sizes to test */
+#if TEST_VALUE_RANGE == 0
+static size_t buf_sizes[] = {
+	0, 1, 7, 8, 9, 15, 16, 17, 31, 32, 33, 63, 64, 65, 127, 128, 129, 255,
+	256, 257, 320, 384, 511, 512, 513, 1023, 1024, 1025, 1518, 1522, 1600,
+	2048, 3072, 4096, 5120, 6144, 7168, 8192
+};
+/* MUST be as large as largest packet size above */
+#define SMALL_BUFFER_SIZE       8192
+#else /* TEST_VALUE_RANGE != 0 */
+static size_t buf_sizes[TEST_VALUE_RANGE];
+#define SMALL_BUFFER_SIZE       TEST_VALUE_RANGE
+#endif /* TEST_VALUE_RANGE == 0 */
+
+/* Data is aligned on this many bytes (power of 2) */
+#define ALIGNMENT_UNIT          32
+
+
+/*
+ * Create two buffers, and initialise one with random values. These are copied
+ * to the second buffer and then compared to see if the copy was successful.
+ * The bytes outside the copied area are also checked to make sure they were not
+ * changed.
+ */
+static int
+test_single_memcpy(unsigned int off_src, unsigned int off_dst, size_t size)
+{
+	unsigned int i;
+	uint8_t dest[SMALL_BUFFER_SIZE + ALIGNMENT_UNIT];
+	uint8_t src[SMALL_BUFFER_SIZE + ALIGNMENT_UNIT];
+	void * ret;
+
+	/* Setup buffers */
+	for (i = 0; i < SMALL_BUFFER_SIZE + ALIGNMENT_UNIT; i++) {
+		dest[i] = 0;
+		src[i] = (uint8_t) rte_rand();
+	}
+
+	/* Do the copy */
+	ret = rte_memcpy(dest + off_dst, src + off_src, size);
+	if (ret != (dest + off_dst)) {
+		printf("rte_memcpy() returned %p, not %p\n",
+		       ret, dest + off_dst);
+	}
+
+	/* Check nothing before offset is affected */
+	for (i = 0; i < off_dst; i++) {
+		if (dest[i] != 0) {
+			printf("rte_memcpy() failed for %u bytes (offsets=%u,%u): "
+			       "[modified before start of dst].\n",
+			       (unsigned)size, off_src, off_dst);
+			return -1;
+		}
+	}
+
+	/* Check everything was copied */
+	for (i = 0; i < size; i++) {
+		if (dest[i + off_dst] != src[i + off_src]) {
+			printf("rte_memcpy() failed for %u bytes (offsets=%u,%u): "
+			       "[didn't copy byte %u].\n",
+			       (unsigned)size, off_src, off_dst, i);
+			return -1;
+		}
+	}
+
+	/* Check nothing after copy was affected */
+	for (i = size; i < SMALL_BUFFER_SIZE; i++) {
+		if (dest[i + off_dst] != 0) {
+			printf("rte_memcpy() failed for %u bytes (offsets=%u,%u): "
+			       "[copied too many].\n",
+			       (unsigned)size, off_src, off_dst);
+			return -1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * Check functionality for various buffer sizes and data offsets/alignments.
+ */
+static int
+func_test(void)
+{
+	unsigned int off_src, off_dst, i;
+	int ret;
+
+	for (off_src = 0; off_src < ALIGNMENT_UNIT; off_src++) {
+		for (off_dst = 0; off_dst < ALIGNMENT_UNIT; off_dst++) {
+			for (i = 0; i < RTE_DIM(buf_sizes); i++) {
+				ret = test_single_memcpy(off_src, off_dst,
+				                         buf_sizes[i]);
+				if (ret != 0)
+					return -1;
+			}
+		}
+	}
+	return 0;
+}
+
+static int
+test_memcpy(void)
+{
+	int ret;
+
+	ret = func_test();
+	if (ret != 0)
+		return -1;
+	return 0;
+}
+
+REGISTER_TEST_COMMAND(memcpy_autotest, test_memcpy);