Adding upstream version 16.2.11+ds.upstream/16.2.11+dsupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 506 insertions, 0 deletions

diff --git a/src/spdk/dpdk/doc/guides/compressdevs/features/default.ini b/src/spdk/dpdk/doc/guides/compressdevs/features/default.ini
new file mode 100644
index 000000000..e1419ee8d
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/features/default.ini
@@ -0,0 +1,27 @@
+;
+; Features of a default compression driver.
+;
+; This file defines the features that are valid for inclusion in
+; the other driver files and also the order that they appear in
+; the features table in the documentation.
+;
+[Features]
+HW Accelerated         =
+CPU SSE                =
+CPU AVX                =
+CPU AVX2               =
+CPU AVX512             =
+CPU NEON               =
+Stateful Compression   =
+Stateful Decompression =
+Pass-through           =
+OOP SGL In SGL Out     =
+OOP SGL In LB  Out     =
+OOP LB  In SGL Out     =
+Deflate                =
+LZS                    =
+Adler32                =
+Crc32                  =
+Adler32&Crc32          =
+Fixed                  =
+Dynamic                =
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/features/isal.ini b/src/spdk/dpdk/doc/guides/compressdevs/features/isal.ini
new file mode 100644
index 000000000..e705031e5
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/features/isal.ini
@@ -0,0 +1,18 @@
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; Supported features of 'ISA-L' compression driver.
+;
+[Features]
+CPU SSE            = Y
+CPU AVX            = Y
+CPU AVX2           = Y
+CPU AVX512         = Y
+OOP SGL In SGL Out = Y
+OOP SGL In LB  Out = Y
+OOP LB  In SGL Out = Y
+Deflate            = Y
+Adler32            = Y
+Crc32              = Y
+Fixed              = Y
+Dynamic            = Y
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/features/octeontx.ini b/src/spdk/dpdk/doc/guides/compressdevs/features/octeontx.ini
new file mode 100644
index 000000000..cc8b02568
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/features/octeontx.ini
@@ -0,0 +1,10 @@
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; Supported features of 'OCTEON TX ZIP' compression driver.
+;
+[Features]
+HW Accelerated = Y
+Deflate        = Y
+Fixed          = Y
+Dynamic        = Y
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/features/qat.ini b/src/spdk/dpdk/doc/guides/compressdevs/features/qat.ini
new file mode 100644
index 000000000..bced8f9cf
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/features/qat.ini
@@ -0,0 +1,17 @@
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; Supported features of 'QAT' compression driver.
+;
+[Features]
+HW Accelerated         = Y
+Stateful Decompression = Y
+OOP SGL In SGL Out     = Y
+OOP SGL In LB  Out     = Y
+OOP LB  In SGL Out     = Y
+Deflate                = Y
+Adler32                = Y
+Crc32                  = Y
+Adler32&Crc32          = Y
+Fixed                  = Y
+Dynamic                = Y
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/features/zlib.ini b/src/spdk/dpdk/doc/guides/compressdevs/features/zlib.ini
new file mode 100644
index 000000000..58a4ee3ab
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/features/zlib.ini
@@ -0,0 +1,10 @@
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; Supported features of 'ZLIB' compression driver.
+;
+[Features]
+Pass-through   = Y
+Deflate        = Y
+Fixed          = Y
+Dynamic        = Y
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/index.rst b/src/spdk/dpdk/doc/guides/compressdevs/index.rst
new file mode 100644
index 000000000..1f37e260e
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/index.rst
@@ -0,0 +1,16 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2018 Intel Corporation.
+
+Compression Device Drivers
+==========================
+
+
+.. toctree::
+    :maxdepth: 2
+    :numbered:
+
+    overview
+    isal
+    octeontx
+    qat_comp
+    zlib
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/isal.rst b/src/spdk/dpdk/doc/guides/compressdevs/isal.rst
new file mode 100644
index 000000000..af1f41f24
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/isal.rst
@@ -0,0 +1,149 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2018 Intel Corporation.
+
+ISA-L Compression Poll Mode Driver
+==================================
+
+The ISA-L PMD (**librte_pmd_isal_comp**) provides poll mode compression &
+decompression driver support for utilizing Intel ISA-L library,
+which implements the deflate algorithm for both Deflate(compression) and Inflate(decompression).
+
+
+Features
+--------
+
+ISA-L PMD has support for:
+
+Compression/Decompression algorithm:
+
+    * DEFLATE
+
+Huffman code type:
+
+    * FIXED
+    * DYNAMIC
+
+Window size support:
+
+    * 32K
+
+Checksum:
+
+    * CRC32
+    * ADLER32
+
+To enable a checksum in the driver, the compression and/or decompression xform
+structure, rte_comp_xform, must be filled with either of the CompressDev
+checksum flags supported. ::
+
+ compress_xform->compress.chksum = RTE_COMP_CHECKSUM_CRC32
+
+ decompress_xform->decompress.chksum = RTE_COMP_CHECKSUM_CRC32
+
+::
+
+ compress_xform->compress.chksum = RTE_COMP_CHECKSUM_ADLER32
+
+ decompress_xform->decompress.chksum = RTE_COMP_CHECKSUM_ADLER32
+
+If you request a checksum for compression or decompression,
+the checksum field in the operation structure,  ``op->output_chksum``,
+will be filled with the checksum.
+
+.. Note::
+
+ For the compression case above, your output buffer will need to be large enough to hold the compressed data plus a scratchpad for the checksum at the end, the scratchpad is 8 bytes for CRC32 and 4 bytes for Adler32.
+
+Level guide:
+
+The ISA-L levels have been mapped to somewhat correspond to the same ZLIB level,
+i.e. ZLIB L1 gives a compression ratio similar to ISA-L L1.
+Compressdev level 0 enables "No Compression", which passes the uncompressed
+data to the output buffer, plus deflate headers.
+The ISA-L library does not support this, therefore compressdev level 0 is not supported.
+
+The compressdev API has 10 levels, 0-9. ISA-L has 4 levels of compression, 0-3.
+As a result the level mappings from the API to the PMD are shown below.
+
+.. _table_ISA-L_compression_levels:
+
+.. table:: Level mapping from Compressdev to ISA-L PMD.
+
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | Compressdev | PMD Functionality                            | Internal ISA-L                                |
+   | API Level   |                                              | Level                                         |
+   +=============+==============================================+===============================================+
+   | 0           | No compression, Not Supported                | ---                                           |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | 1           | Dynamic (Fast compression)                   | 1                                             |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | 2           | Dynamic                                      | 2                                             |
+   |             | (Higher compression ratio)                   |                                               |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | 3           | Dynamic                                      | 3                                             |
+   |             | (Best compression ratio)                     | (Level 2 if                                   |
+   |             |                                              | no AVX512/AVX2)                               |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | 4           | Dynamic (Best compression ratio)             | Same as above                                 |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | 5           | Dynamic (Best compression ratio)             | Same as above                                 |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | 6           | Dynamic (Best compression ratio)             | Same as above                                 |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | 7           | Dynamic (Best compression ratio)             | Same as above                                 |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | 8           | Dynamic (Best compression ratio)             | Same as above                                 |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+   | 9           | Dynamic (Best compression ratio)             | Same as above                                 |
+   +-------------+----------------------------------------------+-----------------------------------------------+
+
+.. Note::
+
+ The above table only shows mapping when API calls for dynamic compression.
+ For fixed compression, regardless of API level, internally ISA-L level 0 is always used.
+
+
+Limitations
+-----------
+
+* Compressdev level 0, no compression, is not supported.
+
+Installation
+------------
+
+* To build DPDK with Intel's ISA-L library, the user is required to download the library from `<https://github.com/01org/isa-l>`_.
+
+* Once downloaded, the user needs to build the library, the ISA-L autotools are usually sufficient::
+
+    ./autogen.sh
+    ./configure
+
+* make can  be used to install the library on their system, before building DPDK::
+
+    make
+    sudo make install
+
+* To build with meson, the **libisal.pc** file, must be copied into "pkgconfig",
+  e.g. /usr/lib/pkgconfig or /usr/lib64/pkgconfig depending on your system,
+  for meson to find the ISA-L library. The **libisal.pc** is located in library sources::
+
+    cp isal/libisal.pc /usr/lib/pkgconfig/
+
+
+Initialization
+--------------
+
+In order to enable this virtual compression PMD, user must:
+
+* Set ``CONFIG_RTE_LIBRTE_PMD_ISAL=y`` in config/common_base.
+
+To use the PMD in an application, user must:
+
+* Call ``rte_vdev_init("compress_isal")`` within the application.
+
+* Use ``--vdev="compress_isal"`` in the EAL options, which will call ``rte_vdev_init()`` internally.
+
+The following parameter (optional) can be provided in the previous two calls:
+
+* ``socket_id:`` Specify the socket where the memory for the device is going to be allocated
+  (by default, socket_id will be the socket where the core that is creating the PMD is running on).
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/octeontx.rst b/src/spdk/dpdk/doc/guides/compressdevs/octeontx.rst
new file mode 100644
index 000000000..5924ad1fa
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/octeontx.rst
@@ -0,0 +1,105 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2018 Cavium Networks.
+
+OCTEON TX ZIP Compression Poll Mode Driver
+==========================================
+
+The OCTEON TX ZIP PMD (**librte_pmd_octeontx_zip**) provides poll mode
+compression & decompression driver for ZIP HW offload device, found in
+**Cavium OCTEON TX** SoC family.
+
+More information can be found at `Cavium, Inc Official Website
+<http://www.cavium.com/OCTEON-TX_ARM_Processors.html>`_.
+
+Features
+--------
+
+OCTEON TX ZIP PMD has support for:
+
+Compression/Decompression algorithm:
+
+* DEFLATE
+
+Huffman code type:
+
+* FIXED
+* DYNAMIC
+
+Window size support:
+
+* 2 to 2^14
+
+Limitations
+-----------
+
+* Chained mbufs are not supported.
+
+Supported OCTEON TX SoCs
+------------------------
+
+- CN83xx
+
+Steps To Setup Platform
+-----------------------
+
+   OCTEON TX SDK includes kernel image which provides OCTEON TX ZIP PF
+   driver to manage configuration of ZIPVF device
+   Required version of SDK is "OCTEONTX-SDK-6.2.0-build35" or above.
+
+   SDK can be install by using below command.
+   #rpm -ivh OCTEONTX-SDK-6.2.0-build35.x86_64.rpm --force --nodeps
+   It will install OCTEONTX-SDK at following default location
+   /usr/local/Cavium_Networks/OCTEONTX-SDK/
+
+   For more information on building and booting linux kernel on OCTEON TX
+   please refer /usr/local/Cavium_Networks/OCTEONTX-SDK/docs/OcteonTX-SDK-UG_6.2.0.pdf.
+
+   SDK and related information can be obtained from: `Cavium support site <https://support.cavium.com/>`_.
+
+Installation
+------------
+
+Driver Compilation
+~~~~~~~~~~~~~~~~~~
+
+To compile the OCTEON TX ZIP PMD for Linux arm64 gcc target, run the
+following ``make`` command:
+
+   .. code-block:: console
+
+      cd <DPDK-source-directory>
+      make config T=arm64-thunderx-linux-gcc install
+
+
+Initialization
+--------------
+
+The OCTEON TX zip is exposed as pci device which consists of a set of
+PCIe VF devices. On EAL initialization, ZIP PCIe VF devices will be
+probed. To use the PMD in an application, user must:
+
+* run dev_bind script to bind eight ZIP PCIe VFs to the ``vfio-pci`` driver:
+
+   .. code-block:: console
+
+      ./usertools/dpdk-devbind.py -b vfio-pci 0001:04:00.1
+      ./usertools/dpdk-devbind.py -b vfio-pci 0001:04:00.2
+      ./usertools/dpdk-devbind.py -b vfio-pci 0001:04:00.3
+      ./usertools/dpdk-devbind.py -b vfio-pci 0001:04:00.4
+      ./usertools/dpdk-devbind.py -b vfio-pci 0001:04:00.5
+      ./usertools/dpdk-devbind.py -b vfio-pci 0001:04:00.6
+      ./usertools/dpdk-devbind.py -b vfio-pci 0001:04:00.7
+      ./usertools/dpdk-devbind.py -b vfio-pci 0001:04:01.0
+
+* The unit test cases can be tested as below:
+
+   .. code-block:: console
+
+      reserve enough huge pages
+      cd to the top-level DPDK directory
+      export RTE_TARGET=arm64-thunderx-linux-gcc
+      export RTE_SDK=`pwd`
+      cd to app/test
+      type the command "make" to compile
+      run the tests with "./test"
+      type the command "compressdev_autotest" to test
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/overview.rst b/src/spdk/dpdk/doc/guides/compressdevs/overview.rst
new file mode 100644
index 000000000..809e4e6e7
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/overview.rst
@@ -0,0 +1,32 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2018 Intel Corporation.
+
+Compression Device Supported Functionality Matrices
+===================================================
+
+Supported Feature Flags
+-----------------------
+
+.. _table_compression_pmd_features:
+
+.. include:: overview_feature_table.txt
+
+.. Note::
+
+   - "Pass-through" feature flag refers to the ability of the PMD
+     to let input buffers pass-through it, copying the input to the output,
+     without making any modifications to it (no compression done).
+
+   - "OOP SGL In SGL Out" feature flag stands for
+     "Out-of-place Scatter-gather list Input, Scatter-gather list Output",
+     which means PMD supports different scatter-gather styled input and output buffers
+     (i.e. both can consists of multiple segments).
+
+   - "OOP SGL In LB Out" feature flag stands for
+     "Out-of-place Scatter-gather list Input, Linear Buffers Output",
+     which means PMD supports input from scatter-gathered styled buffers, outputting linear buffers
+     (i.e. single segment).
+
+   - "OOP LB In SGL Out" feature flag stands for
+     "Out-of-place Linear Buffers Input, Scatter-gather list Output",
+     which means PMD supports input from linear buffer, outputting scatter-gathered styled buffers.
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/qat_comp.rst b/src/spdk/dpdk/doc/guides/compressdevs/qat_comp.rst
new file mode 100644
index 000000000..475c4a9f9
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/qat_comp.rst
@@ -0,0 +1,53 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2018 Intel Corporation.
+
+Intel(R) QuickAssist (QAT) Compression Poll Mode Driver
+=======================================================
+
+The QAT compression PMD provides poll mode compression & decompression driver
+support for the following hardware accelerator devices:
+
+* ``Intel QuickAssist Technology C62x``
+* ``Intel QuickAssist Technology C3xxx``
+* ``Intel QuickAssist Technology DH895x``
+
+
+Features
+--------
+
+QAT compression PMD has support for:
+
+Compression/Decompression algorithm:
+
+    * DEFLATE - using Fixed and Dynamic Huffman encoding
+
+Window size support:
+
+    * 32K
+
+Checksum generation:
+
+    * CRC32, Adler and combined checksum
+
+Stateful operation:
+
+    * Decompression only
+
+Limitations
+-----------
+
+* Compressdev level 0, no compression, is not supported.
+* Queue-pairs are thread-safe on Intel CPUs but Queues are not (that is, within a single
+  queue-pair all enqueues to the TX queue must be done from one thread and all dequeues
+  from the RX queue must be done from one thread, but enqueues and dequeues may be done
+  in different threads.)
+* No BSD support as BSD QAT kernel driver not available.
+* Stateful compression is not supported.
+
+
+Installation
+------------
+
+The QAT compression PMD is built by default with a standard DPDK build.
+
+It depends on a QAT kernel driver, see :ref:`building_qat`.
diff --git a/src/spdk/dpdk/doc/guides/compressdevs/zlib.rst b/src/spdk/dpdk/doc/guides/compressdevs/zlib.rst
new file mode 100644
index 000000000..986c59d43
--- /dev/null
+++ b/src/spdk/dpdk/doc/guides/compressdevs/zlib.rst
@@ -0,0 +1,69 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2018 Cavium Networks.
+
+ZLIB Compression Poll Mode Driver
+==================================
+
+The ZLIB PMD (**librte_pmd_zlib**) provides poll mode compression &
+decompression driver based on SW zlib library,
+
+Features
+--------
+
+ZLIB PMD has support for:
+
+Compression/Decompression algorithm:
+
+* DEFLATE
+
+Huffman code type:
+
+* FIXED
+* DYNAMIC
+
+Window size support:
+
+* Min - 256 bytes
+* Max - 32K
+
+Limitations
+-----------
+
+* Scatter-Gather and Stateful not supported.
+
+Installation
+------------
+
+* To build DPDK with ZLIB library, the user is required to download the ``libz`` library.
+* Use following command for installation.
+
+* For Fedora users::
+     sudo yum install zlib-devel
+* For Ubuntu users::
+     sudo apt-get install zlib1g-dev
+
+* Once downloaded, the user needs to build the library.
+
+* To build from sources
+  download zlib sources from http://zlib.net/ and do following before building DPDK::
+
+    make
+    sudo make install
+
+Initialization
+--------------
+
+In order to enable this virtual compression PMD, user must:
+
+* Set ``CONFIG_RTE_LIBRTE_PMD_ZLIB=y`` in config/common_base.
+
+To use the PMD in an application, user must:
+
+* Call ``rte_vdev_init("compress_zlib")`` within the application.
+
+* Use ``--vdev="compress_zlib"`` in the EAL options, which will call ``rte_vdev_init()`` internally.
+
+The following parameter (optional) can be provided in the previous two calls:
+
+* ``socket_id:`` Specify the socket where the memory for the device is going to be allocated
+  (by default, socket_id will be the socket where the core that is creating the PMD is running on).