Adding upstream version 16.2.11+ds.upstream/16.2.11+dsupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 223 insertions, 0 deletions

diff --git a/src/spdk/dpdk/lib/librte_net/rte_net.h b/src/spdk/dpdk/lib/librte_net/rte_net.h
new file mode 100644
index 000000000..1560ecfa4
--- /dev/null
+++ b/src/spdk/dpdk/lib/librte_net/rte_net.h
@@ -0,0 +1,223 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2016 6WIND S.A.
+ */
+
+#ifndef _RTE_NET_PTYPE_H_
+#define _RTE_NET_PTYPE_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_ip.h>
+#include <rte_udp.h>
+#include <rte_tcp.h>
+#include <rte_sctp.h>
+
+/**
+ * Structure containing header lengths associated to a packet, filled
+ * by rte_net_get_ptype().
+ */
+struct rte_net_hdr_lens {
+	uint8_t l2_len;
+	uint8_t l3_len;
+	uint8_t l4_len;
+	uint8_t tunnel_len;
+	uint8_t inner_l2_len;
+	uint8_t inner_l3_len;
+	uint8_t inner_l4_len;
+};
+
+/**
+ * Skip IPv6 header extensions.
+ *
+ * This function skips all IPv6 extensions, returning size of
+ * complete header including options and final protocol value.
+ *
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * @param proto
+ *   Protocol field of IPv6 header.
+ * @param m
+ *   The packet mbuf to be parsed.
+ * @param off
+ *   On input, must contain the offset to the first byte following
+ *   IPv6 header, on output, contains offset to the first byte
+ *   of next layer (after any IPv6 extension header)
+ * @param frag
+ *   Contains 1 in output if packet is an IPv6 fragment.
+ * @return
+ *   Protocol that follows IPv6 header.
+ *   -1 if an error occurs during mbuf parsing.
+ */
+__rte_experimental
+int
+rte_net_skip_ip6_ext(uint16_t proto, const struct rte_mbuf *m, uint32_t *off,
+	int *frag);
+
+/**
+ * Parse an Ethernet packet to get its packet type.
+ *
+ * This function parses the network headers in mbuf data and return its
+ * packet type.
+ *
+ * If it is provided by the user, it also fills a rte_net_hdr_lens
+ * structure that contains the lengths of the parsed network
+ * headers. Each length field is valid only if the associated packet
+ * type is set. For instance, hdr_lens->l2_len is valid only if
+ * (retval & RTE_PTYPE_L2_MASK) != RTE_PTYPE_UNKNOWN.
+ *
+ * Supported packet types are:
+ *   L2: Ether, Vlan, QinQ
+ *   L3: IPv4, IPv6
+ *   L4: TCP, UDP, SCTP
+ *   Tunnels: IPv4, IPv6, Gre, Nvgre
+ *
+ * @param m
+ *   The packet mbuf to be parsed.
+ * @param hdr_lens
+ *   A pointer to a structure where the header lengths will be returned,
+ *   or NULL.
+ * @param layers
+ *   List of layers to parse. The function will stop at the first
+ *   empty layer. Examples:
+ *   - To parse all known layers, use RTE_PTYPE_ALL_MASK.
+ *   - To parse only L2 and L3, use RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK
+ * @return
+ *   The packet type of the packet.
+ */
+uint32_t rte_net_get_ptype(const struct rte_mbuf *m,
+	struct rte_net_hdr_lens *hdr_lens, uint32_t layers);
+
+/**
+ * Prepare pseudo header checksum
+ *
+ * This function prepares pseudo header checksum for TSO and non-TSO tcp/udp in
+ * provided mbufs packet data and based on the requested offload flags.
+ *
+ * - for non-TSO tcp/udp packets full pseudo-header checksum is counted and set
+ *   in packet data,
+ * - for TSO the IP payload length is not included in pseudo header.
+ *
+ * This function expects that used headers are in the first data segment of
+ * mbuf, are not fragmented and can be safely modified.
+ *
+ * @param m
+ *   The packet mbuf to be fixed.
+ * @param ol_flags
+ *   TX offloads flags to use with this packet.
+ * @return
+ *   0 if checksum is initialized properly
+ */
+static inline int
+rte_net_intel_cksum_flags_prepare(struct rte_mbuf *m, uint64_t ol_flags)
+{
+	/* Initialise ipv4_hdr to avoid false positive compiler warnings. */
+	struct rte_ipv4_hdr *ipv4_hdr = NULL;
+	struct rte_ipv6_hdr *ipv6_hdr;
+	struct rte_tcp_hdr *tcp_hdr;
+	struct rte_udp_hdr *udp_hdr;
+	uint64_t inner_l3_offset = m->l2_len;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+	/*
+	 * Does packet set any of available offloads?
+	 * Mainly it is required to avoid fragmented headers check if
+	 * no offloads are requested.
+	 */
+	if (!(ol_flags & PKT_TX_OFFLOAD_MASK))
+		return 0;
+#endif
+
+	if (ol_flags & (PKT_TX_OUTER_IPV4 | PKT_TX_OUTER_IPV6))
+		inner_l3_offset += m->outer_l2_len + m->outer_l3_len;
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+	/*
+	 * Check if headers are fragmented.
+	 * The check could be less strict depending on which offloads are
+	 * requested and headers to be used, but let's keep it simple.
+	 */
+	if (unlikely(rte_pktmbuf_data_len(m) <
+		     inner_l3_offset + m->l3_len + m->l4_len))
+		return -ENOTSUP;
+#endif
+
+	if (ol_flags & PKT_TX_IPV4) {
+		ipv4_hdr = rte_pktmbuf_mtod_offset(m, struct rte_ipv4_hdr *,
+				inner_l3_offset);
+
+		if (ol_flags & PKT_TX_IP_CKSUM)
+			ipv4_hdr->hdr_checksum = 0;
+	}
+
+	if ((ol_flags & PKT_TX_L4_MASK) == PKT_TX_UDP_CKSUM) {
+		if (ol_flags & PKT_TX_IPV4) {
+			udp_hdr = (struct rte_udp_hdr *)((char *)ipv4_hdr +
+					m->l3_len);
+			udp_hdr->dgram_cksum = rte_ipv4_phdr_cksum(ipv4_hdr,
+					ol_flags);
+		} else {
+			ipv6_hdr = rte_pktmbuf_mtod_offset(m,
+				struct rte_ipv6_hdr *, inner_l3_offset);
+			/* non-TSO udp */
+			udp_hdr = rte_pktmbuf_mtod_offset(m,
+					struct rte_udp_hdr *,
+					inner_l3_offset + m->l3_len);
+			udp_hdr->dgram_cksum = rte_ipv6_phdr_cksum(ipv6_hdr,
+					ol_flags);
+		}
+	} else if ((ol_flags & PKT_TX_L4_MASK) == PKT_TX_TCP_CKSUM ||
+			(ol_flags & PKT_TX_TCP_SEG)) {
+		if (ol_flags & PKT_TX_IPV4) {
+			/* non-TSO tcp or TSO */
+			tcp_hdr = (struct rte_tcp_hdr *)((char *)ipv4_hdr +
+					m->l3_len);
+			tcp_hdr->cksum = rte_ipv4_phdr_cksum(ipv4_hdr,
+					ol_flags);
+		} else {
+			ipv6_hdr = rte_pktmbuf_mtod_offset(m,
+				struct rte_ipv6_hdr *, inner_l3_offset);
+			/* non-TSO tcp or TSO */
+			tcp_hdr = rte_pktmbuf_mtod_offset(m,
+					struct rte_tcp_hdr *,
+					inner_l3_offset + m->l3_len);
+			tcp_hdr->cksum = rte_ipv6_phdr_cksum(ipv6_hdr,
+					ol_flags);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * Prepare pseudo header checksum
+ *
+ * This function prepares pseudo header checksum for TSO and non-TSO tcp/udp in
+ * provided mbufs packet data.
+ *
+ * - for non-TSO tcp/udp packets full pseudo-header checksum is counted and set
+ *   in packet data,
+ * - for TSO the IP payload length is not included in pseudo header.
+ *
+ * This function expects that used headers are in the first data segment of
+ * mbuf, are not fragmented and can be safely modified.
+ *
+ * @param m
+ *   The packet mbuf to be fixed.
+ * @return
+ *   0 if checksum is initialized properly
+ */
+static inline int
+rte_net_intel_cksum_prepare(struct rte_mbuf *m)
+{
+	return rte_net_intel_cksum_flags_prepare(m, m->ol_flags);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* _RTE_NET_PTYPE_H_ */