diff options
Diffstat (limited to 'doc/dev/rbd-layering.rst')
| -rw-r--r-- | doc/dev/rbd-layering.rst | 281 |
1 files changed, 281 insertions, 0 deletions
diff --git a/doc/dev/rbd-layering.rst b/doc/dev/rbd-layering.rst new file mode 100644 index 000000000..e6e224ce4 --- /dev/null +++ b/doc/dev/rbd-layering.rst @@ -0,0 +1,281 @@ +============ +RBD Layering +============ + +RBD layering refers to the creation of copy-on-write clones of block +devices. This allows for fast image creation, for example to clone a +golden master image of a virtual machine into a new instance. To +simplify the semantics, you can only create a clone of a snapshot - +snapshots are always read-only, so the rest of the image is +unaffected, and there's no possibility of writing to them +accidentally. + +From a user's perspective, a clone is just like any other rbd image. +You can take snapshots of them, read/write them, resize them, etc. +There are no restrictions on clones from a user's viewpoint. + +Note: the terms `child` and `parent` below mean an rbd image created +by cloning, and the rbd image snapshot a child was cloned from. + +Command line interface +---------------------- + +Before cloning a snapshot, you must mark it as protected, to prevent +it from being deleted while child images refer to it: +:: + + $ rbd snap protect pool/image@snap + +Then you can perform the clone: +:: + + $ rbd clone [--parent] pool/parent@snap [--image] pool2/child1 + +You can create a clone with different object sizes from the parent: +:: + + $ rbd clone --order 25 pool/parent@snap pool2/child2 + +To delete the parent, you must first mark it unprotected, which checks +that there are no children left: +:: + + $ rbd snap unprotect pool/image@snap + Cannot unprotect: Still in use by pool2/image2 + $ rbd children pool/image@snap + pool2/child1 + pool2/child2 + $ rbd flatten pool2/child1 + $ rbd rm pool2/child2 + $ rbd snap rm pool/image@snap + Cannot remove a protected snapshot: pool/image@snap + $ rbd snap unprotect pool/image@snap + +Then the snapshot can be deleted like normal: +:: + + $ rbd snap rm pool/image@snap + +Implementation +-------------- + +Data Flow +^^^^^^^^^ + +In the initial implementation, called 'trivial layering', there will +be no tracking of which objects exist in a clone. A read that hits a +non-existent object will attempt to read from the parent snapshot, and +this will continue recursively until an object exists or an image with +no parent is found. This is done through the normal read path from +the parent, so differing object sizes between parents and children +do not matter. + +Before a write to an object is performed, the object is checked for +existence. If it doesn't exist, a copy-up operation is performed, +which means reading the relevant range of data from the parent +snapshot and writing it (plus the original write) to the child +image. To prevent races with multiple writes trying to copy-up the +same object, this copy-up operation will include an atomic create. If +the atomic create fails, the original write is done instead. This +copy-up operation is implemented as a class method so that extra +metadata can be stored by it in the future. In trivial layering, the +copy-up operation copies the entire range needed to the child object +(that is, the full size of the child object). A future optimization +could make this copy-up more fine-grained. + +Another future optimization could be storing a bitmap of which objects +actually exist in a child. This would obviate the check for existence +before each write, and let reads go directly to the parent if needed. + +These optimizations are discussed in: + +http://marc.info/?l=ceph-devel&m=129867273303846 + +Parent/Child relationships +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Children store a reference to their parent in their header, as a tuple +of (pool id, image id, snapshot id). This is enough information to +open the parent and read from it. + +In addition to knowing which parent a given image has, we want to be +able to tell if a protected snapshot still has children. This is +accomplished with a new per-pool object, `rbd_children`, which maps +(parent pool id, parent image id, parent snapshot id) to a list of +child image ids. This is stored in the same pool as the child image +because the client creating a clone already has read/write access to +everything in this pool, but may not have write access to the parent's +pool. This lets a client with read-only access to one pool clone a +snapshot from that pool into a pool they have full access to. It +increases the cost of unprotecting an image, since this needs to check +for children in every pool, but this is a rare operation. It would +likely only be done before removing old images, which is already much +more expensive because it involves deleting every data object in the +image. + +Protection +^^^^^^^^^^ + +Internally, protection_state is a field in the header object that +can be in three states. "protected", "unprotected", and +"unprotecting". The first two are set as the result of "rbd +protect/unprotect". The "unprotecting" state is set while the "rbd +unprotect" command checks for any child images. Only snapshots in the +"protected" state may be cloned, so the "unprotected" state prevents +a race like: + +1. A: walk through all pools, look for clones, find none +2. B: create a clone +3. A: unprotect parent +4. A: rbd snap rm pool/parent@snap + +Resizing +^^^^^^^^ + +Resizing an rbd image is like truncating a sparse file. New space is +treated as zeroes, and shrinking an rbd image deletes the contents +beyond the old bounds. This means that if you have a 10G image full of +data, and you resize it down to 5G and then up to 10G again, the last +5G is treated as zeroes (and any objects that held that data were +removed when the image was shrunk). + +Layering complicates this because the absence of an object no longer +implies it should be treated as zeroes - if the object is part of a +clone, it may mean that some data needs to be read from the parent. + +To preserve the resizing behavior for clones, we need to keep track of +which objects could be stored in the parent. We can track this as the +amount of overlap the child has with the parent, since resizing only +changes the end of an image. When a child is created, its overlap +is the size of the parent snapshot. On each subsequent resize, the +overlap is `min(overlap, new_size)`. That is, shrinking the image +may shrinks the overlap, but increasing the image's size does not +change the overlap. + +Objects that do not exist past the overlap are treated as zeroes. +Objects that do not exist before that point fall back to reading +from the parent. + +Since this overlap changes over time, we store it as part of the +metadata for a snapshot as well. + +Renaming +^^^^^^^^ + +Currently the rbd header object (that stores all the metadata about an +image) is named after the name of the image. This makes renaming +disrupt clients who have the image open (such as children reading from +a parent). To avoid this, we can name the header object by the +id of the image, which does not change. That is, the name of the +header object could be `rbd_header.$id`, where $id is a unique id for +the image in the pool. + +When a client opens an image, all it knows is the name. There is +already a per-pool `rbd_directory` object that maps image names to +ids, but if we relied on it to get the id, we could not open any +images in that pool if that single object was unavailable. To avoid +this dependency, we can store the id of an image in an object called +`rbd_id.$image_name`, where $image_name is the name of the image. The +per-pool `rbd_directory` object is still useful for listing all images +in a pool, however. + +Header changes +-------------- + +The header needs a few new fields: + +* int64_t parent_pool_id +* string parent_image_id +* uint64_t parent_snap_id +* uint64_t overlap (how much of the image may be referring to the parent) + +These are stored in a "parent" key, which is only present if the image +has a parent. + +cls_rbd +^^^^^^^ + +Some new methods are needed: +:: + + /***************** methods on the rbd header *********************/ + /** + * Sets the parent and overlap keys. + * Fails if any of these keys exist, since the image already + * had a parent. + */ + set_parent(uint64_t pool_id, string image_id, uint64_t snap_id) + + /** + * returns the parent pool id, image id, snap id, and overlap, or -ENOENT + * if parent_pool_id does not exist or is -1 + */ + get_parent(uint64_t snapid) + + /** + * Removes the parent key + */ + remove_parent() // after all parent data is copied to the child + + /*************** methods on the rbd_children object *****************/ + + add_child(uint64_t parent_pool_id, string parent_image_id, + uint64_t parent_snap_id, string image_id); + remove_child(uint64_t parent_pool_id, string parent_image_id, + uint64_t parent_snap_id, string image_id); + /** + * List ids of a given parent + */ + get_children(uint64_t parent_pool_id, string parent_image_id, + uint64_t parent_snap_id, uint64_t max_return, + string start); + /** + * list parent + */ + get_parents(uint64_t max_return, uint64_t start_pool_id, + string start_image_id, string start_snap_id); + + + /************ methods on the rbd_id.$image_name object **************/ + + set_id(string id) + get_id() + + /************** methods on the rbd_directory object *****************/ + + dir_get_id(string name); + dir_get_name(string id); + dir_list(string start_after, uint64_t max_return); + dir_add_image(string name, string id); + dir_remove_image(string name, string id); + dir_rename_image(string src, string dest, string id); + +Two existing methods will change if the image supports +layering: +:: + + snapshot_add - stores current overlap and has_parent with + other snapshot metadata (images that don't have + layering enabled aren't affected) + + set_size - will adjust the parent overlap down as needed. + +librbd +^^^^^^ + +Opening a child image opens its parent (and this will continue +recursively as needed). This means that an ImageCtx will contain a +pointer to the parent image context. Differing object sizes won't +matter, since reading from the parent will go through the parent +image context. + +Discard will need to change for layered images so that it only +truncates objects, and does not remove them. If we removed objects, we +could not tell if we needed to read them from the parent. + +A new clone method will be added, which takes the same arguments as +create except size (size of the parent image is used). + +Instead of expanding the rbd_info struct, we will break the metadata +retrieval into several API calls. Right now, the only users of +rbd_stat() other than 'rbd info' only use it to retrieve image size. |