diff options
Diffstat (limited to 'doc/rbd/rbd-snapshot.rst')
| -rw-r--r-- | doc/rbd/rbd-snapshot.rst | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/doc/rbd/rbd-snapshot.rst b/doc/rbd/rbd-snapshot.rst new file mode 100644 index 000000000..765a1555b --- /dev/null +++ b/doc/rbd/rbd-snapshot.rst @@ -0,0 +1,367 @@ +=========== + Snapshots +=========== + +.. index:: Ceph Block Device; snapshots + +A snapshot is a read-only logical copy of an image at a particular point in +time: a checkpoint. One of the advanced features of Ceph block devices is that +you can create snapshots of images to retain point-in-time state history. Ceph +also supports snapshot layering, which allows you to clone images (for example, +VM images) quickly and easily. Ceph block device snapshots are managed using +the ``rbd`` command and several higher-level interfaces, including `QEMU`_, +`libvirt`_, `OpenStack`_, and `CloudStack`_. + +.. important:: To use RBD snapshots, you must have a running Ceph cluster. + +.. note:: Because RBD is unaware of any file system within an image (volume), + snapshots are merely `crash-consistent` unless they are coordinated within + the mounting (attaching) operating system. We therefore recommend that you + pause or stop I/O before taking a snapshot. + + If the volume contains a file system, the file system should be in an + internally consistent state before a snapshot is taken. Snapshots taken + without write quiescing could need an `fsck` pass before they are mounted + again. To quiesce I/O you can use `fsfreeze` command. See the `fsfreeze(8)` + man page for more details. + + For virtual machines, `qemu-guest-agent` can be used to automatically freeze + file systems when creating a snapshot. + +.. ditaa:: + + +------------+ +-------------+ + | {s} | | {s} c999 | + | Active |<-------*| Snapshot | + | Image | | of Image | + | (stop i/o) | | (read only) | + +------------+ +-------------+ + + +Cephx Notes +=========== + +When `cephx`_ authentication is enabled (it is by default), you must specify a +user name or ID and a path to the keyring containing the corresponding key. See +:ref:`User Management <user-management>` for details. + +.. prompt:: bash $ + + rbd --id {user-ID} --keyring /path/to/secret [commands] + rbd --name {username} --keyring /path/to/secret [commands] + +For example: + +.. prompt:: bash $ + + rbd --id admin --keyring /etc/ceph/ceph.keyring [commands] + rbd --name client.admin --keyring /etc/ceph/ceph.keyring [commands] + +.. tip:: Add the user and secret to the ``CEPH_ARGS`` environment variable to + avoid re-entry of these parameters. + + +Snapshot Basics +=============== + +The following procedures demonstrate how to create, list, and remove +snapshots using the ``rbd`` command. + +Create Snapshot +--------------- + +To create a snapshot, use the ``rbd snap create`` command and specify the pool +name, the image name, and the snap name: + +.. prompt:: bash $ + + rbd snap create {pool-name}/{image-name}@{snap-name} + +For example: + +.. prompt:: bash $ + + rbd snap create rbd/foo@snapname + + +List Snapshots +-------------- + +To list the snapshots of an image, use the ``rbd snap ls`` command and specify +the pool name and the image name: + +.. prompt:: bash $ + + rbd snap ls {pool-name}/{image-name} + +For example: + +.. prompt:: bash $ + + rbd snap ls rbd/foo + + +Roll back Snapshot +------------------ + +To roll back to a snapshot, use the ``rbd snap rollback`` command and specify +the pool name, the image name, and the snap name: + +.. prompt:: bash $ + + rbd snap rollback {pool-name}/{image-name}@{snap-name} + +For example: + +.. prompt:: bash $ + + rbd snap rollback rbd/foo@snapname + + +.. note:: Rolling back an image to a snapshot means overwriting the current + version of the image with data from a snapshot. The time it takes to execute + a rollback increases with the size of the image. It is **faster to clone** + from a snapshot **than to roll back** an image to a snapshot. Cloning from a + snapshot is the preferred method of returning to a pre-existing state. + + +Delete a Snapshot +----------------- + +To delete a snapshot, use the ``rbd snap rm`` command and specify the pool +name, the image name, and the snap name: + +.. prompt:: bash $ + + rbd snap rm {pool-name}/{image-name}@{snap-name} + +For example: + +.. prompt:: bash $ + + rbd snap rm rbd/foo@snapname + + +.. note:: Ceph OSDs delete data asynchronously, so deleting a snapshot does + not immediately free up the capacity of the underlying OSDs. This process is + known as "snaptrim", and is referred to as such in ``ceph status`` output. + +Purge Snapshots +--------------- + +To delete all snapshots, use the ``rbd snap purge`` command and specify the +pool name and the image name: + +.. prompt:: bash $ + + rbd snap purge {pool-name}/{image-name} + +For example: + +.. prompt:: bash $ + + rbd snap purge rbd/foo + + +.. index:: Ceph Block Device; snapshot layering + +Layering +======== + +Ceph supports the ability to create many copy-on-write (COW) clones of a block +device snapshot. Snapshot layering enables Ceph block device clients to create +images very quickly. For example, you might create a block device image with a +Linux VM written to it, snapshot the image, protect the snapshot, and create as +many copy-on-write clones as you like. A snapshot is read-only, so cloning a +snapshot simplifies semantics, making it possible to create clones rapidly. + + +.. ditaa:: + + +-------------+ +-------------+ + | {s} c999 | | {s} | + | Snapshot | Child refers | COW Clone | + | of Image |<------------*| of Snapshot | + | | to Parent | | + | (read only) | | (writable) | + +-------------+ +-------------+ + + Parent Child + +.. note:: The terms "parent" and "child" refer to a Ceph block device snapshot + (parent) and the corresponding image cloned from the snapshot (child). + These terms are important for the command line usage below. + +Each cloned image (child) stores a reference to its parent image, which enables +the cloned image to open the parent snapshot and read it. + +A copy-on-write clone of a snapshot behaves exactly like any other Ceph +block device image. You can read to, write from, clone, and resize cloned +images. There are no special restrictions with cloned images. However, the +copy-on-write clone of a snapshot depends on the snapshot, so you must +protect the snapshot before you clone it. The diagram below depicts this +process. + +.. note:: Ceph supports the cloning of only "RBD format 2" images (that is, + images created without specifying ``--image-format 1``). The Linux kernel + client supports cloned images beginning with the 3.10 release. + +Getting Started with Layering +----------------------------- + +Ceph block device layering is a simple process. You must have an image. You +must create a snapshot of the image. You must protect the snapshot. After you +have performed these steps, you can begin cloning the snapshot. + +.. ditaa:: + + +----------------------------+ +-----------------------------+ + | | | | + | Create Block Device Image |------->| Create a Snapshot | + | | | | + +----------------------------+ +-----------------------------+ + | + +--------------------------------------+ + | + v + +----------------------------+ +-----------------------------+ + | | | | + | Protect the Snapshot |------->| Clone the Snapshot | + | | | | + +----------------------------+ +-----------------------------+ + + +The cloned image has a reference to the parent snapshot, and includes the pool +ID, the image ID, and the snapshot ID. The inclusion of the pool ID means that +you may clone snapshots from one pool to images in another pool. + +#. **Image Template:** A common use case for block device layering is to create + a base image and a snapshot that serves as a template for clones. For + example: a user may create an image for a Linux distribution (for example, + Ubuntu 22.04) and create a snapshot of it. The user may occasionally update + the image and create a new snapshot (by using such commands as ``sudo + apt-get update``, ``sudo apt-get upgrade``, or ``sudo apt-get dist-upgrade`` + followed by ``rbd snap create``). As the image matures, the user can clone + any one of the snapshots. + +#. **Extended Template:** A more advanced use case includes extending a + template image to provide more information than a base image. For + example, a user may clone an image (for example, a VM template) and install + other software (for example, a database, a content management system, an + analytics system) and then snapshot the extended image, which may itself be + updated just like the base image. + +#. **Template Pool:** One way to use block device layering is to create a pool + that contains (1) base images that act as templates and (2) snapshots of + those templates. You may then extend read-only privileges to users so that + they may clone the snapshots even though they do not have permissions that + allow them to write or execute within the pool. + +#. **Image Migration/Recovery:** One way to use block device layering is to + migrate or recover data from one pool into another pool. + +Protecting a Snapshot +--------------------- + +Clones access the parent snapshots. All clones would break if a user +inadvertently deleted the parent snapshot. To prevent data loss, you must +protect the snapshot before you can clone it: + +.. prompt:: bash $ + + rbd snap protect {pool-name}/{image-name}@{snapshot-name} + +For example: + +.. prompt:: bash $ + + rbd snap protect rbd/foo@snapname + +.. note:: You cannot delete a protected snapshot. + +Cloning a Snapshot +------------------ + +To clone a snapshot, specify the parent pool, the parent image, and the parent +snapshot; and also the child pool together with the image name. You must +protect the snapshot before you can clone it: + +.. prompt:: bash $ + + rbd clone {pool-name}/{parent-image-name}@{snap-name} {pool-name}/{child-image-name} + +For example: + +.. prompt:: bash $ + + rbd clone rbd/foo@snapname rbd/bar + + +.. note:: You may clone a snapshot from one pool to an image in another pool. + For example, you may maintain read-only images and snapshots as templates in + one pool, and writeable clones in another pool. + +Unprotecting a Snapshot +----------------------- + +Before you can delete a snapshot, you must first unprotect it. Additionally, +you may *NOT* delete snapshots that have references from clones. You must +flatten or delete each clone of a snapshot before you can unprotect the +snapshot: + +.. prompt:: bash $ + + rbd snap unprotect {pool-name}/{image-name}@{snapshot-name} + +For example: + +.. prompt:: bash $ + + rbd snap unprotect rbd/foo@snapname + + +Listing Children of a Snapshot +------------------------------ + +To list the children of a snapshot, use the ``rbd children`` command and +specify the pool name, the image name, and the snap name: + +.. prompt:: bash $ + + rbd children {pool-name}/{image-name}@{snapshot-name} + +For example: + +.. prompt:: bash $ + + rbd children rbd/foo@snapname + + +Flattening a Cloned Image +------------------------- + +Cloned images retain a reference to the parent snapshot. When you remove the +reference to the parent snapshot from the clone, you effectively "flatten" the +clone by copying the data stored in the snapshot to the clone. The time it +takes to flatten a clone increases with the size of the snapshot. To delete a +snapshot, you must first flatten the child images (or delete them): + +.. prompt:: bash $ + + rbd flatten {pool-name}/{image-name} + +For example: + +.. prompt:: bash $ + + rbd flatten rbd/bar + +.. note:: Since a flattened image contains all the data stored in the snapshot, + a flattened image takes up more storage space than a layered clone does. + + +.. _cephx: ../../rados/configuration/auth-config-ref/ +.. _QEMU: ../qemu-rbd/ +.. _OpenStack: ../rbd-openstack/ +.. _CloudStack: ../rbd-cloudstack/ +.. _libvirt: ../libvirt/ |