diff options
Diffstat (limited to 'src/pybind/mgr/dashboard/frontend/src/app/ceph/shared/smart-list/fixtures/smart_data_version_1_0_scsi_response.json')
-rw-r--r-- | src/pybind/mgr/dashboard/frontend/src/app/ceph/shared/smart-list/fixtures/smart_data_version_1_0_scsi_response.json | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/src/pybind/mgr/dashboard/frontend/src/app/ceph/shared/smart-list/fixtures/smart_data_version_1_0_scsi_response.json b/src/pybind/mgr/dashboard/frontend/src/app/ceph/shared/smart-list/fixtures/smart_data_version_1_0_scsi_response.json new file mode 100644 index 000000000..dfbe580c7 --- /dev/null +++ b/src/pybind/mgr/dashboard/frontend/src/app/ceph/shared/smart-list/fixtures/smart_data_version_1_0_scsi_response.json @@ -0,0 +1,208 @@ +{ + "WDC_WUH721818AL5204_012345689": { + "device": { + "info_name": "/dev/sdf", + "name": "/dev/sdf", + "protocol": "SCSI", + "type": "scsi" + }, + "device_type": { + "name": "disk", + "scsi_value": 0 + }, + "form_factor": { + "name": "3.5 inches", + "scsi_value": 2 + }, + "json_format_version": [ + 1, + 0 + ], + "local_time": { + "asctime": "Sun May 8 14:21:11 2022 UTC", + "time_t": 1652019671 + }, + "logical_block_size": 512, + "model_name": "WDC WUH721818AL5204", + "nvme_smart_health_information_add_log_error": "nvme returned an error: sudo: exit status: 231", + "nvme_smart_health_information_add_log_error_code": -22, + "nvme_vendor": "wdc", + "physical_block_size": 4096, + "power_on_time": { + "hours": 1719, + "minutes": 55 + }, + "product": "WUH721818AL5204", + "revision": "C232", + "rotation_rate": 7200, + "scsi_error_counter_log": { + "read": { + "correction_algorithm_invocations": 1001, + "errors_corrected_by_eccdelayed": 0, + "errors_corrected_by_eccfast": 0, + "errors_corrected_by_rereads_rewrites": 0, + "gigabytes_processed": "8519.006", + "total_errors_corrected": 0, + "total_uncorrected_errors": 0 + }, + "verify": { + "correction_algorithm_invocations": 261, + "errors_corrected_by_eccdelayed": 0, + "errors_corrected_by_eccfast": 0, + "errors_corrected_by_rereads_rewrites": 0, + "gigabytes_processed": "0.000", + "total_errors_corrected": 0, + "total_uncorrected_errors": 0 + }, + "write": { + "correction_algorithm_invocations": 25720, + "errors_corrected_by_eccdelayed": 0, + "errors_corrected_by_eccfast": 0, + "errors_corrected_by_rereads_rewrites": 0, + "gigabytes_processed": "146241.629", + "total_errors_corrected": 0, + "total_uncorrected_errors": 0 + } + }, + "scsi_grown_defect_list": 0, + "scsi_version": "SPC-5", + "serial_number": "0123456789", + "smart_status": { + "passed": true + }, + "smartctl": { + "argv": [ + "smartctl", + "-x", + "--json=o", + "/dev/sdf" + ], + "build_info": "(local build)", + "exit_status": 0, + "output": [ + "smartctl 7.1 2020-04-05 r5049 [x86_64-linux-4.18.0-348.2.1.el8_5.x86_64] (local build)", + "Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org", + "", + "=== START OF INFORMATION SECTION ===", + "Vendor: WDC", + "Product: WUH721818AL5204", + "Revision: C232", + "Compliance: SPC-5", + "User Capacity: 18,000,207,937,536 bytes [18.0 TB]", + "Logical block size: 512 bytes", + "Physical block size: 4096 bytes", + "LU is fully provisioned", + "Rotation Rate: 7200 rpm", + "Form Factor: 3.5 inches", + "Logical Unit id: 0xffffffffffffffffffffffff", + "Serial number: 0123456789", + "Device type: disk", + "Transport protocol: SAS (SPL-3)", + "Local Time is: Sun May 8 14:21:11 2022 UTC", + "SMART support is: Available - device has SMART capability.", + "SMART support is: Enabled", + "Temperature Warning: Enabled", + "Read Cache is: Enabled", + "Writeback Cache is: Enabled", + "", + "=== START OF READ SMART DATA SECTION ===", + "SMART Health Status: OK", + "", + "Grown defects during certification <not available>", + "Total blocks reassigned during format <not available>", + "Total new blocks reassigned <not available>", + "Power on minutes since format <not available>", + "Current Drive Temperature: 38 C", + "Drive Trip Temperature: 85 C", + "", + "Manufactured in week 43 of year 2021", + "Specified cycle count over device lifetime: 50000", + "Accumulated start-stop cycles: 9", + "Specified load-unload count over device lifetime: 600000", + "Accumulated load-unload cycles: 74", + "Elements in grown defect list: 0", + "", + "Error counter log:", + " Errors Corrected by Total Correction Gigabytes Total", + " ECC rereads/ errors algorithm processed uncorrected", + " fast | delayed rewrites corrected invocations [10^9 bytes] errors", + "read: 0 0 0 0 1001 8519.006 0", + "write: 0 0 0 0 25720 146241.629 0", + "verify: 0 0 0 0 261 0.000 0", + "", + "Non-medium error count: 0", + "", + "No Self-tests have been logged", + "", + "Background scan results log", + " Status: waiting until BMS interval timer expires", + " Accumulated power on time, hours:minutes 1719:55 [103195 minutes]", + " Number of background scans performed: 5, scan progress: 0.00%", + " Number of background medium scans performed: 5", + "", + "Protocol Specific port log page for SAS SSP", + "relative target port id = 1", + " generation code = 3", + " number of phys = 1", + " phy identifier = 0", + " attached device type: expander device", + " attached reason: loss of dword synchronization", + " reason: unknown", + " negotiated logical link rate: phy enabled; 12 Gbps", + " attached initiator port: ssp=0 stp=0 smp=1", + " attached target port: ssp=0 stp=0 smp=1", + " SAS address = 0xffffffffffffffffffffffff", + " attached SAS address = 0xffffffffffffffffffffffff", + " attached phy identifier = 0", + " Invalid DWORD count = 0", + " Running disparity error count = 0", + " Loss of DWORD synchronization = 0", + " Phy reset problem = 0", + " Phy event descriptors:", + " Invalid word count: 0", + " Running disparity error count: 0", + " Loss of dword synchronization count: 0", + " Phy reset problem count: 0", + "relative target port id = 2", + " generation code = 3", + " number of phys = 1", + " phy identifier = 1", + " attached device type: expander device", + " attached reason: power on", + " reason: unknown", + " negotiated logical link rate: phy enabled; 12 Gbps", + " attached initiator port: ssp=0 stp=0 smp=1", + " attached target port: ssp=0 stp=0 smp=1", + " SAS address = 0xffffffffffffffffffffffff", + " attached SAS address = 0xffffffffffffffffffffffff", + " attached phy identifier = 0", + " Invalid DWORD count = 0", + " Running disparity error count = 0", + " Loss of DWORD synchronization = 0", + " Phy reset problem = 0", + " Phy event descriptors:", + " Invalid word count: 0", + " Running disparity error count: 0", + " Loss of dword synchronization count: 0", + " Phy reset problem count: 0", + "" + ], + "platform_info": "x86_64-linux-4.18.0-348.2.1.el8_5.x86_64", + "svn_revision": "5049", + "version": [ + 7, + 1 + ] + }, + "temperature": { + "current": 38, + "drive_trip": 85 + }, + "user_capacity": { + "blocks": 35156656128, + "bytes": 18000207937536 + }, + "vendor": "WDC" + } + } +
\ No newline at end of file |