Adding upstream version 115.7.0esr.upstream/115.7.0esrupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 559 insertions, 0 deletions

diff --git a/gfx/2d/SkConvolver.cpp b/gfx/2d/SkConvolver.cpp
new file mode 100644
index 0000000000..befe8da30b
--- /dev/null
+++ b/gfx/2d/SkConvolver.cpp
@@ -0,0 +1,559 @@
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* vim: set ts=8 sts=2 et sw=2 tw=80: */
+// Copyright (c) 2011-2016 Google Inc.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the gfx/skia/LICENSE file.
+
+#include "SkConvolver.h"
+#include "mozilla/Vector.h"
+
+#ifdef USE_SSE2
+#  include "mozilla/SSE.h"
+#endif
+
+#ifdef USE_NEON
+#  include "mozilla/arm.h"
+#endif
+
+namespace skia {
+
+// Converts the argument to an 8-bit unsigned value by clamping to the range
+// 0-255.
+static inline unsigned char ClampTo8(int a) {
+  if (static_cast<unsigned>(a) < 256) {
+    return a;  // Avoid the extra check in the common case.
+  }
+  if (a < 0) {
+    return 0;
+  }
+  return 255;
+}
+
+// Convolves horizontally along a single row. The row data is given in
+// |srcData| and continues for the numValues() of the filter.
+template <bool hasAlpha>
+void ConvolveHorizontally(const unsigned char* srcData,
+                          const SkConvolutionFilter1D& filter,
+                          unsigned char* outRow) {
+  // Loop over each pixel on this row in the output image.
+  int numValues = filter.numValues();
+  for (int outX = 0; outX < numValues; outX++) {
+    // Get the filter that determines the current output pixel.
+    int filterOffset, filterLength;
+    const SkConvolutionFilter1D::ConvolutionFixed* filterValues =
+        filter.FilterForValue(outX, &filterOffset, &filterLength);
+
+    // Compute the first pixel in this row that the filter affects. It will
+    // touch |filterLength| pixels (4 bytes each) after this.
+    const unsigned char* rowToFilter = &srcData[filterOffset * 4];
+
+    // Apply the filter to the row to get the destination pixel in |accum|.
+    int accum[4] = {0};
+    for (int filterX = 0; filterX < filterLength; filterX++) {
+      SkConvolutionFilter1D::ConvolutionFixed curFilter = filterValues[filterX];
+      accum[0] += curFilter * rowToFilter[filterX * 4 + 0];
+      accum[1] += curFilter * rowToFilter[filterX * 4 + 1];
+      accum[2] += curFilter * rowToFilter[filterX * 4 + 2];
+      if (hasAlpha) {
+        accum[3] += curFilter * rowToFilter[filterX * 4 + 3];
+      }
+    }
+
+    // Bring this value back in range. All of the filter scaling factors
+    // are in fixed point with kShiftBits bits of fractional part.
+    accum[0] >>= SkConvolutionFilter1D::kShiftBits;
+    accum[1] >>= SkConvolutionFilter1D::kShiftBits;
+    accum[2] >>= SkConvolutionFilter1D::kShiftBits;
+
+    if (hasAlpha) {
+      accum[3] >>= SkConvolutionFilter1D::kShiftBits;
+    }
+
+    // Store the new pixel.
+    outRow[outX * 4 + 0] = ClampTo8(accum[0]);
+    outRow[outX * 4 + 1] = ClampTo8(accum[1]);
+    outRow[outX * 4 + 2] = ClampTo8(accum[2]);
+    if (hasAlpha) {
+      outRow[outX * 4 + 3] = ClampTo8(accum[3]);
+    }
+  }
+}
+
+// Does vertical convolution to produce one output row. The filter values and
+// length are given in the first two parameters. These are applied to each
+// of the rows pointed to in the |sourceDataRows| array, with each row
+// being |pixelWidth| wide.
+//
+// The output must have room for |pixelWidth * 4| bytes.
+template <bool hasAlpha>
+void ConvolveVertically(
+    const SkConvolutionFilter1D::ConvolutionFixed* filterValues,
+    int filterLength, unsigned char* const* sourceDataRows, int pixelWidth,
+    unsigned char* outRow) {
+  // We go through each column in the output and do a vertical convolution,
+  // generating one output pixel each time.
+  for (int outX = 0; outX < pixelWidth; outX++) {
+    // Compute the number of bytes over in each row that the current column
+    // we're convolving starts at. The pixel will cover the next 4 bytes.
+    int byteOffset = outX * 4;
+
+    // Apply the filter to one column of pixels.
+    int accum[4] = {0};
+    for (int filterY = 0; filterY < filterLength; filterY++) {
+      SkConvolutionFilter1D::ConvolutionFixed curFilter = filterValues[filterY];
+      accum[0] += curFilter * sourceDataRows[filterY][byteOffset + 0];
+      accum[1] += curFilter * sourceDataRows[filterY][byteOffset + 1];
+      accum[2] += curFilter * sourceDataRows[filterY][byteOffset + 2];
+      if (hasAlpha) {
+        accum[3] += curFilter * sourceDataRows[filterY][byteOffset + 3];
+      }
+    }
+
+    // Bring this value back in range. All of the filter scaling factors
+    // are in fixed point with kShiftBits bits of precision.
+    accum[0] >>= SkConvolutionFilter1D::kShiftBits;
+    accum[1] >>= SkConvolutionFilter1D::kShiftBits;
+    accum[2] >>= SkConvolutionFilter1D::kShiftBits;
+    if (hasAlpha) {
+      accum[3] >>= SkConvolutionFilter1D::kShiftBits;
+    }
+
+    // Store the new pixel.
+    outRow[byteOffset + 0] = ClampTo8(accum[0]);
+    outRow[byteOffset + 1] = ClampTo8(accum[1]);
+    outRow[byteOffset + 2] = ClampTo8(accum[2]);
+
+    if (hasAlpha) {
+      unsigned char alpha = ClampTo8(accum[3]);
+
+      // Make sure the alpha channel doesn't come out smaller than any of the
+      // color channels. We use premultipled alpha channels, so this should
+      // never happen, but rounding errors will cause this from time to time.
+      // These "impossible" colors will cause overflows (and hence random pixel
+      // values) when the resulting bitmap is drawn to the screen.
+      //
+      // We only need to do this when generating the final output row (here).
+      int maxColorChannel =
+          std::max(outRow[byteOffset + 0],
+                   std::max(outRow[byteOffset + 1], outRow[byteOffset + 2]));
+      if (alpha < maxColorChannel) {
+        outRow[byteOffset + 3] = maxColorChannel;
+      } else {
+        outRow[byteOffset + 3] = alpha;
+      }
+    } else {
+      // No alpha channel, the image is opaque.
+      outRow[byteOffset + 3] = 0xff;
+    }
+  }
+}
+
+#ifdef USE_SSE2
+void convolve_vertically_avx2(const int16_t* filter, int filterLen,
+                              uint8_t* const* srcRows, int width, uint8_t* out,
+                              bool hasAlpha);
+void convolve_horizontally_sse2(const unsigned char* srcData,
+                                const SkConvolutionFilter1D& filter,
+                                unsigned char* outRow, bool hasAlpha);
+void convolve_vertically_sse2(const int16_t* filter, int filterLen,
+                              uint8_t* const* srcRows, int width, uint8_t* out,
+                              bool hasAlpha);
+#elif defined(USE_NEON)
+void convolve_horizontally_neon(const unsigned char* srcData,
+                                const SkConvolutionFilter1D& filter,
+                                unsigned char* outRow, bool hasAlpha);
+void convolve_vertically_neon(const int16_t* filter, int filterLen,
+                              uint8_t* const* srcRows, int width, uint8_t* out,
+                              bool hasAlpha);
+#endif
+
+void convolve_horizontally(const unsigned char* srcData,
+                           const SkConvolutionFilter1D& filter,
+                           unsigned char* outRow, bool hasAlpha) {
+#ifdef USE_SSE2
+  if (mozilla::supports_sse2()) {
+    convolve_horizontally_sse2(srcData, filter, outRow, hasAlpha);
+    return;
+  }
+#elif defined(USE_NEON)
+  if (mozilla::supports_neon()) {
+    convolve_horizontally_neon(srcData, filter, outRow, hasAlpha);
+    return;
+  }
+#endif
+  if (hasAlpha) {
+    ConvolveHorizontally<true>(srcData, filter, outRow);
+  } else {
+    ConvolveHorizontally<false>(srcData, filter, outRow);
+  }
+}
+
+void convolve_vertically(
+    const SkConvolutionFilter1D::ConvolutionFixed* filterValues,
+    int filterLength, unsigned char* const* sourceDataRows, int pixelWidth,
+    unsigned char* outRow, bool hasAlpha) {
+#ifdef USE_SSE2
+  if (mozilla::supports_avx2()) {
+    convolve_vertically_avx2(filterValues, filterLength, sourceDataRows,
+                             pixelWidth, outRow, hasAlpha);
+    return;
+  }
+  if (mozilla::supports_sse2()) {
+    convolve_vertically_sse2(filterValues, filterLength, sourceDataRows,
+                             pixelWidth, outRow, hasAlpha);
+    return;
+  }
+#elif defined(USE_NEON)
+  if (mozilla::supports_neon()) {
+    convolve_vertically_neon(filterValues, filterLength, sourceDataRows,
+                             pixelWidth, outRow, hasAlpha);
+    return;
+  }
+#endif
+  if (hasAlpha) {
+    ConvolveVertically<true>(filterValues, filterLength, sourceDataRows,
+                             pixelWidth, outRow);
+  } else {
+    ConvolveVertically<false>(filterValues, filterLength, sourceDataRows,
+                              pixelWidth, outRow);
+  }
+}
+
+// Stores a list of rows in a circular buffer. The usage is you write into it
+// by calling AdvanceRow. It will keep track of which row in the buffer it
+// should use next, and the total number of rows added.
+class CircularRowBuffer {
+ public:
+  // The number of pixels in each row is given in |sourceRowPixelWidth|.
+  // The maximum number of rows needed in the buffer is |maxYFilterSize|
+  // (we only need to store enough rows for the biggest filter).
+  //
+  // We use the |firstInputRow| to compute the coordinates of all of the
+  // following rows returned by Advance().
+  CircularRowBuffer(int destRowPixelWidth, int maxYFilterSize,
+                    int firstInputRow)
+      : fRowByteWidth(destRowPixelWidth * 4),
+        fNumRows(maxYFilterSize),
+        fNextRow(0),
+        fNextRowCoordinate(firstInputRow) {
+    fBuffer.resize(fRowByteWidth * maxYFilterSize);
+    fRowAddresses.resize(fNumRows);
+  }
+
+  // Moves to the next row in the buffer, returning a pointer to the beginning
+  // of it.
+  unsigned char* advanceRow() {
+    unsigned char* row = &fBuffer[fNextRow * fRowByteWidth];
+    fNextRowCoordinate++;
+
+    // Set the pointer to the next row to use, wrapping around if necessary.
+    fNextRow++;
+    if (fNextRow == fNumRows) {
+      fNextRow = 0;
+    }
+    return row;
+  }
+
+  // Returns a pointer to an "unrolled" array of rows. These rows will start
+  // at the y coordinate placed into |*firstRowIndex| and will continue in
+  // order for the maximum number of rows in this circular buffer.
+  //
+  // The |firstRowIndex_| may be negative. This means the circular buffer
+  // starts before the top of the image (it hasn't been filled yet).
+  unsigned char* const* GetRowAddresses(int* firstRowIndex) {
+    // Example for a 4-element circular buffer holding coords 6-9.
+    //   Row 0   Coord 8
+    //   Row 1   Coord 9
+    //   Row 2   Coord 6  <- fNextRow = 2, fNextRowCoordinate = 10.
+    //   Row 3   Coord 7
+    //
+    // The "next" row is also the first (lowest) coordinate. This computation
+    // may yield a negative value, but that's OK, the math will work out
+    // since the user of this buffer will compute the offset relative
+    // to the firstRowIndex and the negative rows will never be used.
+    *firstRowIndex = fNextRowCoordinate - fNumRows;
+
+    int curRow = fNextRow;
+    for (int i = 0; i < fNumRows; i++) {
+      fRowAddresses[i] = &fBuffer[curRow * fRowByteWidth];
+
+      // Advance to the next row, wrapping if necessary.
+      curRow++;
+      if (curRow == fNumRows) {
+        curRow = 0;
+      }
+    }
+    return &fRowAddresses[0];
+  }
+
+ private:
+  // The buffer storing the rows. They are packed, each one fRowByteWidth.
+  std::vector<unsigned char> fBuffer;
+
+  // Number of bytes per row in the |buffer|.
+  int fRowByteWidth;
+
+  // The number of rows available in the buffer.
+  int fNumRows;
+
+  // The next row index we should write into. This wraps around as the
+  // circular buffer is used.
+  int fNextRow;
+
+  // The y coordinate of the |fNextRow|. This is incremented each time a
+  // new row is appended and does not wrap.
+  int fNextRowCoordinate;
+
+  // Buffer used by GetRowAddresses().
+  std::vector<unsigned char*> fRowAddresses;
+};
+
+SkConvolutionFilter1D::SkConvolutionFilter1D() : fMaxFilter(0) {}
+
+SkConvolutionFilter1D::~SkConvolutionFilter1D() = default;
+
+void SkConvolutionFilter1D::AddFilter(int filterOffset,
+                                      const ConvolutionFixed* filterValues,
+                                      int filterLength) {
+  // It is common for leading/trailing filter values to be zeros. In such
+  // cases it is beneficial to only store the central factors.
+  // For a scaling to 1/4th in each dimension using a Lanczos-2 filter on
+  // a 1080p image this optimization gives a ~10% speed improvement.
+  int filterSize = filterLength;
+  int firstNonZero = 0;
+  while (firstNonZero < filterLength && filterValues[firstNonZero] == 0) {
+    firstNonZero++;
+  }
+
+  if (firstNonZero < filterLength) {
+    // Here we have at least one non-zero factor.
+    int lastNonZero = filterLength - 1;
+    while (lastNonZero >= 0 && filterValues[lastNonZero] == 0) {
+      lastNonZero--;
+    }
+
+    filterOffset += firstNonZero;
+    filterLength = lastNonZero + 1 - firstNonZero;
+    MOZ_ASSERT(filterLength > 0);
+
+    fFilterValues.insert(fFilterValues.end(), &filterValues[firstNonZero],
+                         &filterValues[lastNonZero + 1]);
+  } else {
+    // Here all the factors were zeroes.
+    filterLength = 0;
+  }
+
+  FilterInstance instance = {
+      // We pushed filterLength elements onto fFilterValues
+      int(fFilterValues.size()) - filterLength, filterOffset, filterLength,
+      filterSize};
+  fFilters.push_back(instance);
+
+  fMaxFilter = std::max(fMaxFilter, filterLength);
+}
+
+bool SkConvolutionFilter1D::ComputeFilterValues(
+    const SkBitmapFilter& aBitmapFilter, int32_t aSrcSize, int32_t aDstSize) {
+  // When we're doing a magnification, the scale will be larger than one. This
+  // means the destination pixels are much smaller than the source pixels, and
+  // that the range covered by the filter won't necessarily cover any source
+  // pixel boundaries. Therefore, we use these clamped values (max of 1) for
+  // some computations.
+  float scale = float(aDstSize) / float(aSrcSize);
+  float clampedScale = std::min(1.0f, scale);
+  // This is how many source pixels from the center we need to count
+  // to support the filtering function.
+  float srcSupport = aBitmapFilter.width() / clampedScale;
+  float invScale = 1.0f / scale;
+
+  mozilla::Vector<float, 64> filterValues;
+  mozilla::Vector<ConvolutionFixed, 64> fixedFilterValues;
+
+  // Loop over all pixels in the output range. We will generate one set of
+  // filter values for each one. Those values will tell us how to blend the
+  // source pixels to compute the destination pixel.
+
+  // This value is computed based on how SkTDArray::resizeStorageToAtLeast works
+  // in order to ensure that it does not overflow or assert. That functions
+  // computes
+  //   n+4 + (n+4)/4
+  // and we want to to fit in a 32 bit signed int. Equating that to 2^31-1 and
+  // solving n gives n = (2^31-6)*4/5 = 1717986913.6
+  const int32_t maxToPassToReserveAdditional = 1717986913;
+
+  int32_t filterValueCount = int32_t(ceilf(aDstSize * srcSupport * 2));
+  if (aDstSize > maxToPassToReserveAdditional || filterValueCount < 0 ||
+      filterValueCount > maxToPassToReserveAdditional) {
+    return false;
+  }
+  reserveAdditional(aDstSize, filterValueCount);
+  for (int32_t destI = 0; destI < aDstSize; destI++) {
+    // This is the pixel in the source directly under the pixel in the dest.
+    // Note that we base computations on the "center" of the pixels. To see
+    // why, observe that the destination pixel at coordinates (0, 0) in a 5.0x
+    // downscale should "cover" the pixels around the pixel with *its center*
+    // at coordinates (2.5, 2.5) in the source, not those around (0, 0).
+    // Hence we need to scale coordinates (0.5, 0.5), not (0, 0).
+    float srcPixel = (static_cast<float>(destI) + 0.5f) * invScale;
+
+    // Compute the (inclusive) range of source pixels the filter covers.
+    float srcBegin = std::max(0.0f, floorf(srcPixel - srcSupport));
+    float srcEnd = std::min(aSrcSize - 1.0f, ceilf(srcPixel + srcSupport));
+
+    // Compute the unnormalized filter value at each location of the source
+    // it covers.
+
+    // Sum of the filter values for normalizing.
+    // Distance from the center of the filter, this is the filter coordinate
+    // in source space. We also need to consider the center of the pixel
+    // when comparing distance against 'srcPixel'. In the 5x downscale
+    // example used above the distance from the center of the filter to
+    // the pixel with coordinates (2, 2) should be 0, because its center
+    // is at (2.5, 2.5).
+    int32_t filterCount = int32_t(srcEnd - srcBegin) + 1;
+    if (filterCount <= 0 || !filterValues.resize(filterCount) ||
+        !fixedFilterValues.resize(filterCount)) {
+      return false;
+    }
+
+    float destFilterDist = (srcBegin + 0.5f - srcPixel) * clampedScale;
+    float filterSum = 0.0f;
+    for (int32_t index = 0; index < filterCount; index++) {
+      float filterValue = aBitmapFilter.evaluate(destFilterDist);
+      filterValues[index] = filterValue;
+      filterSum += filterValue;
+      destFilterDist += clampedScale;
+    }
+
+    // The filter must be normalized so that we don't affect the brightness of
+    // the image. Convert to normalized fixed point.
+    ConvolutionFixed fixedSum = 0;
+    float invFilterSum = 1.0f / filterSum;
+    for (int32_t fixedI = 0; fixedI < filterCount; fixedI++) {
+      ConvolutionFixed curFixed = ToFixed(filterValues[fixedI] * invFilterSum);
+      fixedSum += curFixed;
+      fixedFilterValues[fixedI] = curFixed;
+    }
+
+    // The conversion to fixed point will leave some rounding errors, which
+    // we add back in to avoid affecting the brightness of the image. We
+    // arbitrarily add this to the center of the filter array (this won't always
+    // be the center of the filter function since it could get clipped on the
+    // edges, but it doesn't matter enough to worry about that case).
+    ConvolutionFixed leftovers = ToFixed(1) - fixedSum;
+    fixedFilterValues[filterCount / 2] += leftovers;
+
+    AddFilter(int32_t(srcBegin), fixedFilterValues.begin(), filterCount);
+  }
+
+  return maxFilter() > 0 && numValues() == aDstSize;
+}
+
+// Does a two-dimensional convolution on the given source image.
+//
+// It is assumed the source pixel offsets referenced in the input filters
+// reference only valid pixels, so the source image size is not required. Each
+// row of the source image starts |sourceByteRowStride| after the previous
+// one (this allows you to have rows with some padding at the end).
+//
+// The result will be put into the given output buffer. The destination image
+// size will be xfilter.numValues() * yfilter.numValues() pixels. It will be
+// in rows of exactly xfilter.numValues() * 4 bytes.
+//
+// |sourceHasAlpha| is a hint that allows us to avoid doing computations on
+// the alpha channel if the image is opaque. If you don't know, set this to
+// true and it will work properly, but setting this to false will be a few
+// percent faster if you know the image is opaque.
+//
+// The layout in memory is assumed to be 4-bytes per pixel in B-G-R-A order
+// (this is ARGB when loaded into 32-bit words on a little-endian machine).
+/**
+ *  Returns false if it was unable to perform the convolution/rescale. in which
+ * case the output buffer is assumed to be undefined.
+ */
+bool BGRAConvolve2D(const unsigned char* sourceData, int sourceByteRowStride,
+                    bool sourceHasAlpha, const SkConvolutionFilter1D& filterX,
+                    const SkConvolutionFilter1D& filterY,
+                    int outputByteRowStride, unsigned char* output) {
+  int maxYFilterSize = filterY.maxFilter();
+
+  // The next row in the input that we will generate a horizontally
+  // convolved row for. If the filter doesn't start at the beginning of the
+  // image (this is the case when we are only resizing a subset), then we
+  // don't want to generate any output rows before that. Compute the starting
+  // row for convolution as the first pixel for the first vertical filter.
+  int filterOffset = 0, filterLength = 0;
+  const SkConvolutionFilter1D::ConvolutionFixed* filterValues =
+      filterY.FilterForValue(0, &filterOffset, &filterLength);
+  int nextXRow = filterOffset;
+
+  // We loop over each row in the input doing a horizontal convolution. This
+  // will result in a horizontally convolved image. We write the results into
+  // a circular buffer of convolved rows and do vertical convolution as rows
+  // are available. This prevents us from having to store the entire
+  // intermediate image and helps cache coherency.
+  // We will need four extra rows to allow horizontal convolution could be done
+  // simultaneously. We also pad each row in row buffer to be aligned-up to
+  // 32 bytes.
+  // TODO(jiesun): We do not use aligned load from row buffer in vertical
+  // convolution pass yet. Somehow Windows does not like it.
+  int rowBufferWidth = (filterX.numValues() + 31) & ~0x1F;
+  int rowBufferHeight = maxYFilterSize;
+
+  // check for too-big allocation requests : crbug.com/528628
+  {
+    int64_t size = int64_t(rowBufferWidth) * int64_t(rowBufferHeight);
+    // need some limit, to avoid over-committing success from malloc, but then
+    // crashing when we try to actually use the memory.
+    // 100meg seems big enough to allow "normal" zoom factors and image sizes
+    // through while avoiding the crash seen by the bug (crbug.com/528628)
+    if (size > 100 * 1024 * 1024) {
+      //            printf_stderr("BGRAConvolve2D: tmp allocation [%lld] too
+      //            big\n", size);
+      return false;
+    }
+  }
+
+  CircularRowBuffer rowBuffer(rowBufferWidth, rowBufferHeight, filterOffset);
+
+  // Loop over every possible output row, processing just enough horizontal
+  // convolutions to run each subsequent vertical convolution.
+  MOZ_ASSERT(outputByteRowStride >= filterX.numValues() * 4);
+  int numOutputRows = filterY.numValues();
+
+  // We need to check which is the last line to convolve before we advance 4
+  // lines in one iteration.
+  int lastFilterOffset, lastFilterLength;
+  filterY.FilterForValue(numOutputRows - 1, &lastFilterOffset,
+                         &lastFilterLength);
+
+  for (int outY = 0; outY < numOutputRows; outY++) {
+    filterValues = filterY.FilterForValue(outY, &filterOffset, &filterLength);
+
+    // Generate output rows until we have enough to run the current filter.
+    while (nextXRow < filterOffset + filterLength) {
+      convolve_horizontally(
+          &sourceData[(uint64_t)nextXRow * sourceByteRowStride], filterX,
+          rowBuffer.advanceRow(), sourceHasAlpha);
+      nextXRow++;
+    }
+
+    // Compute where in the output image this row of final data will go.
+    unsigned char* curOutputRow = &output[(uint64_t)outY * outputByteRowStride];
+
+    // Get the list of rows that the circular buffer has, in order.
+    int firstRowInCircularBuffer;
+    unsigned char* const* rowsToConvolve =
+        rowBuffer.GetRowAddresses(&firstRowInCircularBuffer);
+
+    // Now compute the start of the subset of those rows that the filter needs.
+    unsigned char* const* firstRowForFilter =
+        &rowsToConvolve[filterOffset - firstRowInCircularBuffer];
+
+    convolve_vertically(filterValues, filterLength, firstRowForFilter,
+                        filterX.numValues(), curOutputRow, sourceHasAlpha);
+  }
+  return true;
+}
+
+}  // namespace skia