diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 19:33:14 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 19:33:14 +0000 |
commit | 36d22d82aa202bb199967e9512281e9a53db42c9 (patch) | |
tree | 105e8c98ddea1c1e4784a60a5a6410fa416be2de /intl/icu/source/i18n/double-conversion-fast-dtoa.cpp | |
parent | Initial commit. (diff) | |
download | firefox-esr-36d22d82aa202bb199967e9512281e9a53db42c9.tar.xz firefox-esr-36d22d82aa202bb199967e9512281e9a53db42c9.zip |
Adding upstream version 115.7.0esr.upstream/115.7.0esrupstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'intl/icu/source/i18n/double-conversion-fast-dtoa.cpp')
-rw-r--r-- | intl/icu/source/i18n/double-conversion-fast-dtoa.cpp | 683 |
1 files changed, 683 insertions, 0 deletions
diff --git a/intl/icu/source/i18n/double-conversion-fast-dtoa.cpp b/intl/icu/source/i18n/double-conversion-fast-dtoa.cpp new file mode 100644 index 0000000000..06e4cf1255 --- /dev/null +++ b/intl/icu/source/i18n/double-conversion-fast-dtoa.cpp @@ -0,0 +1,683 @@ +// © 2018 and later: Unicode, Inc. and others. +// License & terms of use: http://www.unicode.org/copyright.html +// +// From the double-conversion library. Original license: +// +// Copyright 2012 the V8 project authors. All rights reserved. +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following +// disclaimer in the documentation and/or other materials provided +// with the distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +// ICU PATCH: ifdef around UCONFIG_NO_FORMATTING +#include "unicode/utypes.h" +#if !UCONFIG_NO_FORMATTING + +// ICU PATCH: Customize header file paths for ICU. + +#include "double-conversion-fast-dtoa.h" + +#include "double-conversion-cached-powers.h" +#include "double-conversion-diy-fp.h" +#include "double-conversion-ieee.h" + +// ICU PATCH: Wrap in ICU namespace +U_NAMESPACE_BEGIN + +namespace double_conversion { + +// The minimal and maximal target exponent define the range of w's binary +// exponent, where 'w' is the result of multiplying the input by a cached power +// of ten. +// +// A different range might be chosen on a different platform, to optimize digit +// generation, but a smaller range requires more powers of ten to be cached. +static const int kMinimalTargetExponent = -60; +static const int kMaximalTargetExponent = -32; + + +// Adjusts the last digit of the generated number, and screens out generated +// solutions that may be inaccurate. A solution may be inaccurate if it is +// outside the safe interval, or if we cannot prove that it is closer to the +// input than a neighboring representation of the same length. +// +// Input: * buffer containing the digits of too_high / 10^kappa +// * the buffer's length +// * distance_too_high_w == (too_high - w).f() * unit +// * unsafe_interval == (too_high - too_low).f() * unit +// * rest = (too_high - buffer * 10^kappa).f() * unit +// * ten_kappa = 10^kappa * unit +// * unit = the common multiplier +// Output: returns true if the buffer is guaranteed to contain the closest +// representable number to the input. +// Modifies the generated digits in the buffer to approach (round towards) w. +static bool RoundWeed(Vector<char> buffer, + int length, + uint64_t distance_too_high_w, + uint64_t unsafe_interval, + uint64_t rest, + uint64_t ten_kappa, + uint64_t unit) { + uint64_t small_distance = distance_too_high_w - unit; + uint64_t big_distance = distance_too_high_w + unit; + // Let w_low = too_high - big_distance, and + // w_high = too_high - small_distance. + // Note: w_low < w < w_high + // + // The real w (* unit) must lie somewhere inside the interval + // ]w_low; w_high[ (often written as "(w_low; w_high)") + + // Basically the buffer currently contains a number in the unsafe interval + // ]too_low; too_high[ with too_low < w < too_high + // + // too_high - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + // ^v 1 unit ^ ^ ^ ^ + // boundary_high --------------------- . . . . + // ^v 1 unit . . . . + // - - - - - - - - - - - - - - - - - - - + - - + - - - - - - . . + // . . ^ . . + // . big_distance . . . + // . . . . rest + // small_distance . . . . + // v . . . . + // w_high - - - - - - - - - - - - - - - - - - . . . . + // ^v 1 unit . . . . + // w ---------------------------------------- . . . . + // ^v 1 unit v . . . + // w_low - - - - - - - - - - - - - - - - - - - - - . . . + // . . v + // buffer --------------------------------------------------+-------+-------- + // . . + // safe_interval . + // v . + // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - . + // ^v 1 unit . + // boundary_low ------------------------- unsafe_interval + // ^v 1 unit v + // too_low - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + // + // + // Note that the value of buffer could lie anywhere inside the range too_low + // to too_high. + // + // boundary_low, boundary_high and w are approximations of the real boundaries + // and v (the input number). They are guaranteed to be precise up to one unit. + // In fact the error is guaranteed to be strictly less than one unit. + // + // Anything that lies outside the unsafe interval is guaranteed not to round + // to v when read again. + // Anything that lies inside the safe interval is guaranteed to round to v + // when read again. + // If the number inside the buffer lies inside the unsafe interval but not + // inside the safe interval then we simply do not know and bail out (returning + // false). + // + // Similarly we have to take into account the imprecision of 'w' when finding + // the closest representation of 'w'. If we have two potential + // representations, and one is closer to both w_low and w_high, then we know + // it is closer to the actual value v. + // + // By generating the digits of too_high we got the largest (closest to + // too_high) buffer that is still in the unsafe interval. In the case where + // w_high < buffer < too_high we try to decrement the buffer. + // This way the buffer approaches (rounds towards) w. + // There are 3 conditions that stop the decrementation process: + // 1) the buffer is already below w_high + // 2) decrementing the buffer would make it leave the unsafe interval + // 3) decrementing the buffer would yield a number below w_high and farther + // away than the current number. In other words: + // (buffer{-1} < w_high) && w_high - buffer{-1} > buffer - w_high + // Instead of using the buffer directly we use its distance to too_high. + // Conceptually rest ~= too_high - buffer + // We need to do the following tests in this order to avoid over- and + // underflows. + DOUBLE_CONVERSION_ASSERT(rest <= unsafe_interval); + while (rest < small_distance && // Negated condition 1 + unsafe_interval - rest >= ten_kappa && // Negated condition 2 + (rest + ten_kappa < small_distance || // buffer{-1} > w_high + small_distance - rest >= rest + ten_kappa - small_distance)) { + buffer[length - 1]--; + rest += ten_kappa; + } + + // We have approached w+ as much as possible. We now test if approaching w- + // would require changing the buffer. If yes, then we have two possible + // representations close to w, but we cannot decide which one is closer. + if (rest < big_distance && + unsafe_interval - rest >= ten_kappa && + (rest + ten_kappa < big_distance || + big_distance - rest > rest + ten_kappa - big_distance)) { + return false; + } + + // Weeding test. + // The safe interval is [too_low + 2 ulp; too_high - 2 ulp] + // Since too_low = too_high - unsafe_interval this is equivalent to + // [too_high - unsafe_interval + 4 ulp; too_high - 2 ulp] + // Conceptually we have: rest ~= too_high - buffer + return (2 * unit <= rest) && (rest <= unsafe_interval - 4 * unit); +} + + +// Rounds the buffer upwards if the result is closer to v by possibly adding +// 1 to the buffer. If the precision of the calculation is not sufficient to +// round correctly, return false. +// The rounding might shift the whole buffer in which case the kappa is +// adjusted. For example "99", kappa = 3 might become "10", kappa = 4. +// +// If 2*rest > ten_kappa then the buffer needs to be round up. +// rest can have an error of +/- 1 unit. This function accounts for the +// imprecision and returns false, if the rounding direction cannot be +// unambiguously determined. +// +// Precondition: rest < ten_kappa. +static bool RoundWeedCounted(Vector<char> buffer, + int length, + uint64_t rest, + uint64_t ten_kappa, + uint64_t unit, + int* kappa) { + DOUBLE_CONVERSION_ASSERT(rest < ten_kappa); + // The following tests are done in a specific order to avoid overflows. They + // will work correctly with any uint64 values of rest < ten_kappa and unit. + // + // If the unit is too big, then we don't know which way to round. For example + // a unit of 50 means that the real number lies within rest +/- 50. If + // 10^kappa == 40 then there is no way to tell which way to round. + if (unit >= ten_kappa) return false; + // Even if unit is just half the size of 10^kappa we are already completely + // lost. (And after the previous test we know that the expression will not + // over/underflow.) + if (ten_kappa - unit <= unit) return false; + // If 2 * (rest + unit) <= 10^kappa we can safely round down. + if ((ten_kappa - rest > rest) && (ten_kappa - 2 * rest >= 2 * unit)) { + return true; + } + // If 2 * (rest - unit) >= 10^kappa, then we can safely round up. + if ((rest > unit) && (ten_kappa - (rest - unit) <= (rest - unit))) { + // Increment the last digit recursively until we find a non '9' digit. + buffer[length - 1]++; + for (int i = length - 1; i > 0; --i) { + if (buffer[i] != '0' + 10) break; + buffer[i] = '0'; + buffer[i - 1]++; + } + // If the first digit is now '0'+ 10 we had a buffer with all '9's. With the + // exception of the first digit all digits are now '0'. Simply switch the + // first digit to '1' and adjust the kappa. Example: "99" becomes "10" and + // the power (the kappa) is increased. + if (buffer[0] == '0' + 10) { + buffer[0] = '1'; + (*kappa) += 1; + } + return true; + } + return false; +} + +// Returns the biggest power of ten that is less than or equal to the given +// number. We furthermore receive the maximum number of bits 'number' has. +// +// Returns power == 10^(exponent_plus_one-1) such that +// power <= number < power * 10. +// If number_bits == 0 then 0^(0-1) is returned. +// The number of bits must be <= 32. +// Precondition: number < (1 << (number_bits + 1)). + +// Inspired by the method for finding an integer log base 10 from here: +// http://graphics.stanford.edu/~seander/bithacks.html#IntegerLog10 +static unsigned int const kSmallPowersOfTen[] = + {0, 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, 100000000, + 1000000000}; + +static void BiggestPowerTen(uint32_t number, + int number_bits, + uint32_t* power, + int* exponent_plus_one) { + DOUBLE_CONVERSION_ASSERT(number < (1u << (number_bits + 1))); + // 1233/4096 is approximately 1/lg(10). + int exponent_plus_one_guess = ((number_bits + 1) * 1233 >> 12); + // We increment to skip over the first entry in the kPowersOf10 table. + // Note: kPowersOf10[i] == 10^(i-1). + exponent_plus_one_guess++; + // We don't have any guarantees that 2^number_bits <= number. + if (number < kSmallPowersOfTen[exponent_plus_one_guess]) { + exponent_plus_one_guess--; + } + *power = kSmallPowersOfTen[exponent_plus_one_guess]; + *exponent_plus_one = exponent_plus_one_guess; +} + +// Generates the digits of input number w. +// w is a floating-point number (DiyFp), consisting of a significand and an +// exponent. Its exponent is bounded by kMinimalTargetExponent and +// kMaximalTargetExponent. +// Hence -60 <= w.e() <= -32. +// +// Returns false if it fails, in which case the generated digits in the buffer +// should not be used. +// Preconditions: +// * low, w and high are correct up to 1 ulp (unit in the last place). That +// is, their error must be less than a unit of their last digits. +// * low.e() == w.e() == high.e() +// * low < w < high, and taking into account their error: low~ <= high~ +// * kMinimalTargetExponent <= w.e() <= kMaximalTargetExponent +// Postconditions: returns false if procedure fails. +// otherwise: +// * buffer is not null-terminated, but len contains the number of digits. +// * buffer contains the shortest possible decimal digit-sequence +// such that LOW < buffer * 10^kappa < HIGH, where LOW and HIGH are the +// correct values of low and high (without their error). +// * if more than one decimal representation gives the minimal number of +// decimal digits then the one closest to W (where W is the correct value +// of w) is chosen. +// Remark: this procedure takes into account the imprecision of its input +// numbers. If the precision is not enough to guarantee all the postconditions +// then false is returned. This usually happens rarely (~0.5%). +// +// Say, for the sake of example, that +// w.e() == -48, and w.f() == 0x1234567890abcdef +// w's value can be computed by w.f() * 2^w.e() +// We can obtain w's integral digits by simply shifting w.f() by -w.e(). +// -> w's integral part is 0x1234 +// w's fractional part is therefore 0x567890abcdef. +// Printing w's integral part is easy (simply print 0x1234 in decimal). +// In order to print its fraction we repeatedly multiply the fraction by 10 and +// get each digit. Example the first digit after the point would be computed by +// (0x567890abcdef * 10) >> 48. -> 3 +// The whole thing becomes slightly more complicated because we want to stop +// once we have enough digits. That is, once the digits inside the buffer +// represent 'w' we can stop. Everything inside the interval low - high +// represents w. However we have to pay attention to low, high and w's +// imprecision. +static bool DigitGen(DiyFp low, + DiyFp w, + DiyFp high, + Vector<char> buffer, + int* length, + int* kappa) { + DOUBLE_CONVERSION_ASSERT(low.e() == w.e() && w.e() == high.e()); + DOUBLE_CONVERSION_ASSERT(low.f() + 1 <= high.f() - 1); + DOUBLE_CONVERSION_ASSERT(kMinimalTargetExponent <= w.e() && w.e() <= kMaximalTargetExponent); + // low, w and high are imprecise, but by less than one ulp (unit in the last + // place). + // If we remove (resp. add) 1 ulp from low (resp. high) we are certain that + // the new numbers are outside of the interval we want the final + // representation to lie in. + // Inversely adding (resp. removing) 1 ulp from low (resp. high) would yield + // numbers that are certain to lie in the interval. We will use this fact + // later on. + // We will now start by generating the digits within the uncertain + // interval. Later we will weed out representations that lie outside the safe + // interval and thus _might_ lie outside the correct interval. + uint64_t unit = 1; + DiyFp too_low = DiyFp(low.f() - unit, low.e()); + DiyFp too_high = DiyFp(high.f() + unit, high.e()); + // too_low and too_high are guaranteed to lie outside the interval we want the + // generated number in. + DiyFp unsafe_interval = DiyFp::Minus(too_high, too_low); + // We now cut the input number into two parts: the integral digits and the + // fractionals. We will not write any decimal separator though, but adapt + // kappa instead. + // Reminder: we are currently computing the digits (stored inside the buffer) + // such that: too_low < buffer * 10^kappa < too_high + // We use too_high for the digit_generation and stop as soon as possible. + // If we stop early we effectively round down. + DiyFp one = DiyFp(static_cast<uint64_t>(1) << -w.e(), w.e()); + // Division by one is a shift. + uint32_t integrals = static_cast<uint32_t>(too_high.f() >> -one.e()); + // Modulo by one is an and. + uint64_t fractionals = too_high.f() & (one.f() - 1); + uint32_t divisor; + int divisor_exponent_plus_one; + BiggestPowerTen(integrals, DiyFp::kSignificandSize - (-one.e()), + &divisor, &divisor_exponent_plus_one); + *kappa = divisor_exponent_plus_one; + *length = 0; + // Loop invariant: buffer = too_high / 10^kappa (integer division) + // The invariant holds for the first iteration: kappa has been initialized + // with the divisor exponent + 1. And the divisor is the biggest power of ten + // that is smaller than integrals. + while (*kappa > 0) { + int digit = integrals / divisor; + DOUBLE_CONVERSION_ASSERT(digit <= 9); + buffer[*length] = static_cast<char>('0' + digit); + (*length)++; + integrals %= divisor; + (*kappa)--; + // Note that kappa now equals the exponent of the divisor and that the + // invariant thus holds again. + uint64_t rest = + (static_cast<uint64_t>(integrals) << -one.e()) + fractionals; + // Invariant: too_high = buffer * 10^kappa + DiyFp(rest, one.e()) + // Reminder: unsafe_interval.e() == one.e() + if (rest < unsafe_interval.f()) { + // Rounding down (by not emitting the remaining digits) yields a number + // that lies within the unsafe interval. + return RoundWeed(buffer, *length, DiyFp::Minus(too_high, w).f(), + unsafe_interval.f(), rest, + static_cast<uint64_t>(divisor) << -one.e(), unit); + } + divisor /= 10; + } + + // The integrals have been generated. We are at the point of the decimal + // separator. In the following loop we simply multiply the remaining digits by + // 10 and divide by one. We just need to pay attention to multiply associated + // data (like the interval or 'unit'), too. + // Note that the multiplication by 10 does not overflow, because w.e >= -60 + // and thus one.e >= -60. + DOUBLE_CONVERSION_ASSERT(one.e() >= -60); + DOUBLE_CONVERSION_ASSERT(fractionals < one.f()); + DOUBLE_CONVERSION_ASSERT(DOUBLE_CONVERSION_UINT64_2PART_C(0xFFFFFFFF, FFFFFFFF) / 10 >= one.f()); + for (;;) { + fractionals *= 10; + unit *= 10; + unsafe_interval.set_f(unsafe_interval.f() * 10); + // Integer division by one. + int digit = static_cast<int>(fractionals >> -one.e()); + DOUBLE_CONVERSION_ASSERT(digit <= 9); + buffer[*length] = static_cast<char>('0' + digit); + (*length)++; + fractionals &= one.f() - 1; // Modulo by one. + (*kappa)--; + if (fractionals < unsafe_interval.f()) { + return RoundWeed(buffer, *length, DiyFp::Minus(too_high, w).f() * unit, + unsafe_interval.f(), fractionals, one.f(), unit); + } + } +} + + + +// Generates (at most) requested_digits digits of input number w. +// w is a floating-point number (DiyFp), consisting of a significand and an +// exponent. Its exponent is bounded by kMinimalTargetExponent and +// kMaximalTargetExponent. +// Hence -60 <= w.e() <= -32. +// +// Returns false if it fails, in which case the generated digits in the buffer +// should not be used. +// Preconditions: +// * w is correct up to 1 ulp (unit in the last place). That +// is, its error must be strictly less than a unit of its last digit. +// * kMinimalTargetExponent <= w.e() <= kMaximalTargetExponent +// +// Postconditions: returns false if procedure fails. +// otherwise: +// * buffer is not null-terminated, but length contains the number of +// digits. +// * the representation in buffer is the most precise representation of +// requested_digits digits. +// * buffer contains at most requested_digits digits of w. If there are less +// than requested_digits digits then some trailing '0's have been removed. +// * kappa is such that +// w = buffer * 10^kappa + eps with |eps| < 10^kappa / 2. +// +// Remark: This procedure takes into account the imprecision of its input +// numbers. If the precision is not enough to guarantee all the postconditions +// then false is returned. This usually happens rarely, but the failure-rate +// increases with higher requested_digits. +static bool DigitGenCounted(DiyFp w, + int requested_digits, + Vector<char> buffer, + int* length, + int* kappa) { + DOUBLE_CONVERSION_ASSERT(kMinimalTargetExponent <= w.e() && w.e() <= kMaximalTargetExponent); + DOUBLE_CONVERSION_ASSERT(kMinimalTargetExponent >= -60); + DOUBLE_CONVERSION_ASSERT(kMaximalTargetExponent <= -32); + // w is assumed to have an error less than 1 unit. Whenever w is scaled we + // also scale its error. + uint64_t w_error = 1; + // We cut the input number into two parts: the integral digits and the + // fractional digits. We don't emit any decimal separator, but adapt kappa + // instead. Example: instead of writing "1.2" we put "12" into the buffer and + // increase kappa by 1. + DiyFp one = DiyFp(static_cast<uint64_t>(1) << -w.e(), w.e()); + // Division by one is a shift. + uint32_t integrals = static_cast<uint32_t>(w.f() >> -one.e()); + // Modulo by one is an and. + uint64_t fractionals = w.f() & (one.f() - 1); + uint32_t divisor; + int divisor_exponent_plus_one; + BiggestPowerTen(integrals, DiyFp::kSignificandSize - (-one.e()), + &divisor, &divisor_exponent_plus_one); + *kappa = divisor_exponent_plus_one; + *length = 0; + + // Loop invariant: buffer = w / 10^kappa (integer division) + // The invariant holds for the first iteration: kappa has been initialized + // with the divisor exponent + 1. And the divisor is the biggest power of ten + // that is smaller than 'integrals'. + while (*kappa > 0) { + int digit = integrals / divisor; + DOUBLE_CONVERSION_ASSERT(digit <= 9); + buffer[*length] = static_cast<char>('0' + digit); + (*length)++; + requested_digits--; + integrals %= divisor; + (*kappa)--; + // Note that kappa now equals the exponent of the divisor and that the + // invariant thus holds again. + if (requested_digits == 0) break; + divisor /= 10; + } + + if (requested_digits == 0) { + uint64_t rest = + (static_cast<uint64_t>(integrals) << -one.e()) + fractionals; + return RoundWeedCounted(buffer, *length, rest, + static_cast<uint64_t>(divisor) << -one.e(), w_error, + kappa); + } + + // The integrals have been generated. We are at the point of the decimal + // separator. In the following loop we simply multiply the remaining digits by + // 10 and divide by one. We just need to pay attention to multiply associated + // data (the 'unit'), too. + // Note that the multiplication by 10 does not overflow, because w.e >= -60 + // and thus one.e >= -60. + DOUBLE_CONVERSION_ASSERT(one.e() >= -60); + DOUBLE_CONVERSION_ASSERT(fractionals < one.f()); + DOUBLE_CONVERSION_ASSERT(DOUBLE_CONVERSION_UINT64_2PART_C(0xFFFFFFFF, FFFFFFFF) / 10 >= one.f()); + while (requested_digits > 0 && fractionals > w_error) { + fractionals *= 10; + w_error *= 10; + // Integer division by one. + int digit = static_cast<int>(fractionals >> -one.e()); + DOUBLE_CONVERSION_ASSERT(digit <= 9); + buffer[*length] = static_cast<char>('0' + digit); + (*length)++; + requested_digits--; + fractionals &= one.f() - 1; // Modulo by one. + (*kappa)--; + } + if (requested_digits != 0) return false; + return RoundWeedCounted(buffer, *length, fractionals, one.f(), w_error, + kappa); +} + + +// Provides a decimal representation of v. +// Returns true if it succeeds, otherwise the result cannot be trusted. +// There will be *length digits inside the buffer (not null-terminated). +// If the function returns true then +// v == (double) (buffer * 10^decimal_exponent). +// The digits in the buffer are the shortest representation possible: no +// 0.09999999999999999 instead of 0.1. The shorter representation will even be +// chosen even if the longer one would be closer to v. +// The last digit will be closest to the actual v. That is, even if several +// digits might correctly yield 'v' when read again, the closest will be +// computed. +static bool Grisu3(double v, + FastDtoaMode mode, + Vector<char> buffer, + int* length, + int* decimal_exponent) { + DiyFp w = Double(v).AsNormalizedDiyFp(); + // boundary_minus and boundary_plus are the boundaries between v and its + // closest floating-point neighbors. Any number strictly between + // boundary_minus and boundary_plus will round to v when convert to a double. + // Grisu3 will never output representations that lie exactly on a boundary. + DiyFp boundary_minus, boundary_plus; + if (mode == FAST_DTOA_SHORTEST) { + Double(v).NormalizedBoundaries(&boundary_minus, &boundary_plus); + } else { + DOUBLE_CONVERSION_ASSERT(mode == FAST_DTOA_SHORTEST_SINGLE); + float single_v = static_cast<float>(v); + Single(single_v).NormalizedBoundaries(&boundary_minus, &boundary_plus); + } + DOUBLE_CONVERSION_ASSERT(boundary_plus.e() == w.e()); + DiyFp ten_mk; // Cached power of ten: 10^-k + int mk; // -k + int ten_mk_minimal_binary_exponent = + kMinimalTargetExponent - (w.e() + DiyFp::kSignificandSize); + int ten_mk_maximal_binary_exponent = + kMaximalTargetExponent - (w.e() + DiyFp::kSignificandSize); + PowersOfTenCache::GetCachedPowerForBinaryExponentRange( + ten_mk_minimal_binary_exponent, + ten_mk_maximal_binary_exponent, + &ten_mk, &mk); + DOUBLE_CONVERSION_ASSERT((kMinimalTargetExponent <= w.e() + ten_mk.e() + + DiyFp::kSignificandSize) && + (kMaximalTargetExponent >= w.e() + ten_mk.e() + + DiyFp::kSignificandSize)); + // Note that ten_mk is only an approximation of 10^-k. A DiyFp only contains a + // 64 bit significand and ten_mk is thus only precise up to 64 bits. + + // The DiyFp::Times procedure rounds its result, and ten_mk is approximated + // too. The variable scaled_w (as well as scaled_boundary_minus/plus) are now + // off by a small amount. + // In fact: scaled_w - w*10^k < 1ulp (unit in the last place) of scaled_w. + // In other words: let f = scaled_w.f() and e = scaled_w.e(), then + // (f-1) * 2^e < w*10^k < (f+1) * 2^e + DiyFp scaled_w = DiyFp::Times(w, ten_mk); + DOUBLE_CONVERSION_ASSERT(scaled_w.e() == + boundary_plus.e() + ten_mk.e() + DiyFp::kSignificandSize); + // In theory it would be possible to avoid some recomputations by computing + // the difference between w and boundary_minus/plus (a power of 2) and to + // compute scaled_boundary_minus/plus by subtracting/adding from + // scaled_w. However the code becomes much less readable and the speed + // enhancements are not terrific. + DiyFp scaled_boundary_minus = DiyFp::Times(boundary_minus, ten_mk); + DiyFp scaled_boundary_plus = DiyFp::Times(boundary_plus, ten_mk); + + // DigitGen will generate the digits of scaled_w. Therefore we have + // v == (double) (scaled_w * 10^-mk). + // Set decimal_exponent == -mk and pass it to DigitGen. If scaled_w is not an + // integer than it will be updated. For instance if scaled_w == 1.23 then + // the buffer will be filled with "123" and the decimal_exponent will be + // decreased by 2. + int kappa; + bool result = DigitGen(scaled_boundary_minus, scaled_w, scaled_boundary_plus, + buffer, length, &kappa); + *decimal_exponent = -mk + kappa; + return result; +} + + +// The "counted" version of grisu3 (see above) only generates requested_digits +// number of digits. This version does not generate the shortest representation, +// and with enough requested digits 0.1 will at some point print as 0.9999999... +// Grisu3 is too imprecise for real halfway cases (1.5 will not work) and +// therefore the rounding strategy for halfway cases is irrelevant. +static bool Grisu3Counted(double v, + int requested_digits, + Vector<char> buffer, + int* length, + int* decimal_exponent) { + DiyFp w = Double(v).AsNormalizedDiyFp(); + DiyFp ten_mk; // Cached power of ten: 10^-k + int mk; // -k + int ten_mk_minimal_binary_exponent = + kMinimalTargetExponent - (w.e() + DiyFp::kSignificandSize); + int ten_mk_maximal_binary_exponent = + kMaximalTargetExponent - (w.e() + DiyFp::kSignificandSize); + PowersOfTenCache::GetCachedPowerForBinaryExponentRange( + ten_mk_minimal_binary_exponent, + ten_mk_maximal_binary_exponent, + &ten_mk, &mk); + DOUBLE_CONVERSION_ASSERT((kMinimalTargetExponent <= w.e() + ten_mk.e() + + DiyFp::kSignificandSize) && + (kMaximalTargetExponent >= w.e() + ten_mk.e() + + DiyFp::kSignificandSize)); + // Note that ten_mk is only an approximation of 10^-k. A DiyFp only contains a + // 64 bit significand and ten_mk is thus only precise up to 64 bits. + + // The DiyFp::Times procedure rounds its result, and ten_mk is approximated + // too. The variable scaled_w (as well as scaled_boundary_minus/plus) are now + // off by a small amount. + // In fact: scaled_w - w*10^k < 1ulp (unit in the last place) of scaled_w. + // In other words: let f = scaled_w.f() and e = scaled_w.e(), then + // (f-1) * 2^e < w*10^k < (f+1) * 2^e + DiyFp scaled_w = DiyFp::Times(w, ten_mk); + + // We now have (double) (scaled_w * 10^-mk). + // DigitGen will generate the first requested_digits digits of scaled_w and + // return together with a kappa such that scaled_w ~= buffer * 10^kappa. (It + // will not always be exactly the same since DigitGenCounted only produces a + // limited number of digits.) + int kappa; + bool result = DigitGenCounted(scaled_w, requested_digits, + buffer, length, &kappa); + *decimal_exponent = -mk + kappa; + return result; +} + + +bool FastDtoa(double v, + FastDtoaMode mode, + int requested_digits, + Vector<char> buffer, + int* length, + int* decimal_point) { + DOUBLE_CONVERSION_ASSERT(v > 0); + DOUBLE_CONVERSION_ASSERT(!Double(v).IsSpecial()); + + bool result = false; + int decimal_exponent = 0; + switch (mode) { + case FAST_DTOA_SHORTEST: + case FAST_DTOA_SHORTEST_SINGLE: + result = Grisu3(v, mode, buffer, length, &decimal_exponent); + break; + case FAST_DTOA_PRECISION: + result = Grisu3Counted(v, requested_digits, + buffer, length, &decimal_exponent); + break; + default: + DOUBLE_CONVERSION_UNREACHABLE(); + } + if (result) { + *decimal_point = *length + decimal_exponent; + buffer[*length] = '\0'; + } + return result; +} + +} // namespace double_conversion + +// ICU PATCH: Close ICU namespace +U_NAMESPACE_END +#endif // ICU PATCH: close #if !UCONFIG_NO_FORMATTING |