Adding upstream version 115.7.0esr.upstream/115.7.0esrupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 260 insertions, 0 deletions

diff --git a/js/src/jit/Trampoline.cpp b/js/src/jit/Trampoline.cpp
new file mode 100644
index 0000000000..bb2e81e183
--- /dev/null
+++ b/js/src/jit/Trampoline.cpp
@@ -0,0 +1,260 @@
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ * vim: set ts=8 sts=2 et sw=2 tw=80:
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+#include <initializer_list>
+
+#include "jit/JitFrames.h"
+#include "jit/JitRuntime.h"
+#include "jit/MacroAssembler.h"
+#include "vm/JitActivation.h"
+#include "vm/JSContext.h"
+
+#include "jit/MacroAssembler-inl.h"
+
+using namespace js;
+using namespace js::jit;
+
+void JitRuntime::generateExceptionTailStub(MacroAssembler& masm,
+                                           Label* profilerExitTail,
+                                           Label* bailoutTail) {
+  AutoCreatedBy acb(masm, "JitRuntime::generateExceptionTailStub");
+
+  exceptionTailOffset_ = startTrampolineCode(masm);
+
+  masm.bind(masm.failureLabel());
+  masm.handleFailureWithHandlerTail(profilerExitTail, bailoutTail);
+}
+
+void JitRuntime::generateProfilerExitFrameTailStub(MacroAssembler& masm,
+                                                   Label* profilerExitTail) {
+  AutoCreatedBy acb(masm, "JitRuntime::generateProfilerExitFrameTailStub");
+
+  profilerExitFrameTailOffset_ = startTrampolineCode(masm);
+  masm.bind(profilerExitTail);
+
+  static constexpr size_t CallerFPOffset =
+      CommonFrameLayout::offsetOfCallerFramePtr();
+
+  // Assert the caller frame's type is one of the types we expect.
+  auto emitAssertPrevFrameType = [&masm](
+                                     Register framePtr, Register scratch,
+                                     std::initializer_list<FrameType> types) {
+#ifdef DEBUG
+    masm.loadPtr(Address(framePtr, CommonFrameLayout::offsetOfDescriptor()),
+                 scratch);
+    masm.and32(Imm32(FRAMETYPE_MASK), scratch);
+
+    Label checkOk;
+    for (FrameType type : types) {
+      masm.branch32(Assembler::Equal, scratch, Imm32(type), &checkOk);
+    }
+    masm.assumeUnreachable("Unexpected previous frame");
+    masm.bind(&checkOk);
+#else
+    (void)masm;
+#endif
+  };
+
+  AllocatableGeneralRegisterSet regs(GeneralRegisterSet::All());
+  regs.take(JSReturnOperand);
+  Register scratch = regs.takeAny();
+
+  // The code generated below expects that the current frame pointer points
+  // to an Ion or Baseline frame, at the state it would be immediately before
+  // the frame epilogue and ret(). Thus, after this stub's business is done, it
+  // restores the frame pointer and stack pointer, then executes a ret() and
+  // returns directly to the caller frame, on behalf of the callee script that
+  // jumped to this code.
+  //
+  // Thus the expected state is:
+  //
+  //    [JitFrameLayout] <-- FramePointer
+  //    [frame contents] <-- StackPointer
+  //
+  // The generated jitcode is responsible for overwriting the
+  // jitActivation->lastProfilingFrame field with a pointer to the previous
+  // Ion or Baseline jit-frame that was pushed before this one. It is also
+  // responsible for overwriting jitActivation->lastProfilingCallSite with
+  // the return address into that frame.
+  //
+  // So this jitcode is responsible for "walking up" the jit stack, finding
+  // the previous Ion or Baseline JS frame, and storing its address and the
+  // return address into the appropriate fields on the current jitActivation.
+  //
+  // There are a fixed number of different path types that can lead to the
+  // current frame, which is either a Baseline or Ion frame:
+  //
+  // <Baseline-Or-Ion>
+  // ^
+  // |
+  // ^--- Ion (or Baseline JSOp::Resume)
+  // |
+  // ^--- Baseline Stub <---- Baseline
+  // |
+  // ^--- IonICCall <---- Ion
+  // |
+  // ^--- Arguments Rectifier
+  // |    ^
+  // |    |
+  // |    ^--- Ion
+  // |    |
+  // |    ^--- Baseline Stub <---- Baseline
+  // |    |
+  // |    ^--- Entry Frame (CppToJSJit or WasmToJSJit)
+  // |
+  // ^--- Entry Frame (CppToJSJit or WasmToJSJit)
+  // |
+  // ^--- Entry Frame (BaselineInterpreter)
+  //
+  // NOTE: Keep this in sync with JSJitProfilingFrameIterator::moveToNextFrame!
+
+  Register actReg = regs.takeAny();
+  masm.loadJSContext(actReg);
+  masm.loadPtr(Address(actReg, offsetof(JSContext, profilingActivation_)),
+               actReg);
+
+  Address lastProfilingFrame(actReg,
+                             JitActivation::offsetOfLastProfilingFrame());
+  Address lastProfilingCallSite(actReg,
+                                JitActivation::offsetOfLastProfilingCallSite());
+
+#ifdef DEBUG
+  // Ensure that frame we are exiting is current lastProfilingFrame
+  {
+    masm.loadPtr(lastProfilingFrame, scratch);
+    Label checkOk;
+    masm.branchPtr(Assembler::Equal, scratch, ImmWord(0), &checkOk);
+    masm.branchPtr(Assembler::Equal, FramePointer, scratch, &checkOk);
+    masm.assumeUnreachable(
+        "Mismatch between stored lastProfilingFrame and current frame "
+        "pointer.");
+    masm.bind(&checkOk);
+  }
+#endif
+
+  // Move FP into a scratch register and use that scratch register below, to
+  // allow unwrapping rectifier frames without clobbering FP.
+  Register fpScratch = regs.takeAny();
+  masm.mov(FramePointer, fpScratch);
+
+  Label again;
+  masm.bind(&again);
+
+  // Load the frame descriptor into |scratch|, figure out what to do depending
+  // on its type.
+  masm.loadPtr(Address(fpScratch, JitFrameLayout::offsetOfDescriptor()),
+               scratch);
+  masm.and32(Imm32(FRAMETYPE_MASK), scratch);
+
+  // Handling of each case is dependent on FrameDescriptor.type
+  Label handle_BaselineOrIonJS;
+  Label handle_BaselineStub;
+  Label handle_Rectifier;
+  Label handle_IonICCall;
+  Label handle_Entry;
+
+  // We check for IonJS and BaselineStub first because these are the most common
+  // types. Calls from Baseline are usually from a BaselineStub frame.
+  masm.branch32(Assembler::Equal, scratch, Imm32(FrameType::IonJS),
+                &handle_BaselineOrIonJS);
+  masm.branch32(Assembler::Equal, scratch, Imm32(FrameType::BaselineStub),
+                &handle_BaselineStub);
+  masm.branch32(Assembler::Equal, scratch, Imm32(FrameType::Rectifier),
+                &handle_Rectifier);
+  if (JitOptions.emitInterpreterEntryTrampoline) {
+    masm.branch32(Assembler::Equal, scratch,
+                  Imm32(FrameType::BaselineInterpreterEntry),
+                  &handle_Rectifier);  // Handle this similarly to rectifier.
+  }
+  masm.branch32(Assembler::Equal, scratch, Imm32(FrameType::CppToJSJit),
+                &handle_Entry);
+  masm.branch32(Assembler::Equal, scratch, Imm32(FrameType::BaselineJS),
+                &handle_BaselineOrIonJS);
+  masm.branch32(Assembler::Equal, scratch, Imm32(FrameType::IonICCall),
+                &handle_IonICCall);
+  masm.branch32(Assembler::Equal, scratch, Imm32(FrameType::WasmToJSJit),
+                &handle_Entry);
+
+  masm.assumeUnreachable(
+      "Invalid caller frame type when returning from a JIT frame.");
+
+  masm.bind(&handle_BaselineOrIonJS);
+  {
+    // Returning directly to a Baseline or Ion frame.
+
+    // lastProfilingCallSite := ReturnAddress
+    masm.loadPtr(Address(fpScratch, JitFrameLayout::offsetOfReturnAddress()),
+                 scratch);
+    masm.storePtr(scratch, lastProfilingCallSite);
+
+    // lastProfilingFrame := CallerFrame
+    masm.loadPtr(Address(fpScratch, CallerFPOffset), scratch);
+    masm.storePtr(scratch, lastProfilingFrame);
+
+    masm.moveToStackPtr(FramePointer);
+    masm.pop(FramePointer);
+    masm.ret();
+  }
+
+  // Shared implementation for BaselineStub and IonICCall frames.
+  auto emitHandleStubFrame = [&](FrameType expectedPrevType) {
+    // Load pointer to stub frame and assert type of its caller frame.
+    masm.loadPtr(Address(fpScratch, CallerFPOffset), fpScratch);
+    emitAssertPrevFrameType(fpScratch, scratch, {expectedPrevType});
+
+    // lastProfilingCallSite := StubFrame.ReturnAddress
+    masm.loadPtr(Address(fpScratch, CommonFrameLayout::offsetOfReturnAddress()),
+                 scratch);
+    masm.storePtr(scratch, lastProfilingCallSite);
+
+    // lastProfilingFrame := StubFrame.CallerFrame
+    masm.loadPtr(Address(fpScratch, CallerFPOffset), scratch);
+    masm.storePtr(scratch, lastProfilingFrame);
+
+    masm.moveToStackPtr(FramePointer);
+    masm.pop(FramePointer);
+    masm.ret();
+  };
+
+  masm.bind(&handle_BaselineStub);
+  {
+    // BaselineJS => BaselineStub frame.
+    emitHandleStubFrame(FrameType::BaselineJS);
+  }
+
+  masm.bind(&handle_IonICCall);
+  {
+    // IonJS => IonICCall frame.
+    emitHandleStubFrame(FrameType::IonJS);
+  }
+
+  masm.bind(&handle_Rectifier);
+  {
+    // There can be multiple previous frame types so just "unwrap" the arguments
+    // rectifier frame and try again.
+    masm.loadPtr(Address(fpScratch, CallerFPOffset), fpScratch);
+    emitAssertPrevFrameType(fpScratch, scratch,
+                            {FrameType::IonJS, FrameType::BaselineStub,
+                             FrameType::CppToJSJit, FrameType::WasmToJSJit});
+    masm.jump(&again);
+  }
+
+  masm.bind(&handle_Entry);
+  {
+    // FrameType::CppToJSJit / FrameType::WasmToJSJit
+    //
+    // A fast-path wasm->jit transition frame is an entry frame from the point
+    // of view of the JIT.
+    // Store null into both fields.
+    masm.movePtr(ImmPtr(nullptr), scratch);
+    masm.storePtr(scratch, lastProfilingCallSite);
+    masm.storePtr(scratch, lastProfilingFrame);
+
+    masm.moveToStackPtr(FramePointer);
+    masm.pop(FramePointer);
+    masm.ret();
+  }
+}