Adding upstream version 115.7.0esr.upstream/115.7.0esrupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 348 insertions, 0 deletions

diff --git a/media/libsoundtouch/src/SoundTouch.h b/media/libsoundtouch/src/SoundTouch.h
new file mode 100644
index 0000000000..19c161fed5
--- /dev/null
+++ b/media/libsoundtouch/src/SoundTouch.h
@@ -0,0 +1,348 @@
+//////////////////////////////////////////////////////////////////////////////
+///
+/// SoundTouch - main class for tempo/pitch/rate adjusting routines. 
+///
+/// Notes:
+/// - Initialize the SoundTouch object instance by setting up the sound stream 
+///   parameters with functions 'setSampleRate' and 'setChannels', then set 
+///   desired tempo/pitch/rate settings with the corresponding functions.
+///
+/// - The SoundTouch class behaves like a first-in-first-out pipeline: The 
+///   samples that are to be processed are fed into one of the pipe by calling
+///   function 'putSamples', while the ready processed samples can be read 
+///   from the other end of the pipeline with function 'receiveSamples'.
+/// 
+/// - The SoundTouch processing classes require certain sized 'batches' of 
+///   samples in order to process the sound. For this reason the classes buffer 
+///   incoming samples until there are enough of samples available for 
+///   processing, then they carry out the processing step and consequently
+///   make the processed samples available for outputting.
+/// 
+/// - For the above reason, the processing routines introduce a certain 
+///   'latency' between the input and output, so that the samples input to
+///   SoundTouch may not be immediately available in the output, and neither 
+///   the amount of outputtable samples may not immediately be in direct 
+///   relationship with the amount of previously input samples.
+///
+/// - The tempo/pitch/rate control parameters can be altered during processing.
+///   Please notice though that they aren't currently protected by semaphores,
+///   so in multi-thread application external semaphore protection may be
+///   required.
+///
+/// - This class utilizes classes 'TDStretch' for tempo change (without modifying
+///   pitch) and 'RateTransposer' for changing the playback rate (that is, both 
+///   tempo and pitch in the same ratio) of the sound. The third available control 
+///   'pitch' (change pitch but maintain tempo) is produced by a combination of
+///   combining the two other controls.
+///
+/// Author        : Copyright (c) Olli Parviainen
+/// Author e-mail : oparviai 'at' iki.fi
+/// SoundTouch WWW: http://www.surina.net/soundtouch
+///
+////////////////////////////////////////////////////////////////////////////////
+//
+// License :
+//
+//  SoundTouch audio processing library
+//  Copyright (c) Olli Parviainen
+//
+//  This library is free software; you can redistribute it and/or
+//  modify it under the terms of the GNU Lesser General Public
+//  License as published by the Free Software Foundation; either
+//  version 2.1 of the License, or (at your option) any later version.
+//
+//  This library is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+//  Lesser General Public License for more details.
+//
+//  You should have received a copy of the GNU Lesser General Public
+//  License along with this library; if not, write to the Free Software
+//  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+//
+////////////////////////////////////////////////////////////////////////////////
+
+#ifndef SoundTouch_H
+#define SoundTouch_H
+
+#include "FIFOSamplePipe.h"
+#include "STTypes.h"
+
+namespace soundtouch
+{
+
+/// Soundtouch library version string
+#define SOUNDTOUCH_VERSION          "2.2"
+
+/// SoundTouch library version id
+#define SOUNDTOUCH_VERSION_ID       (20200)
+
+//
+// Available setting IDs for the 'setSetting' & 'get_setting' functions:
+
+/// Enable/disable anti-alias filter in pitch transposer (0 = disable)
+#define SETTING_USE_AA_FILTER       0
+
+/// Pitch transposer anti-alias filter length (8 .. 128 taps, default = 32)
+#define SETTING_AA_FILTER_LENGTH    1
+
+/// Enable/disable quick seeking algorithm in tempo changer routine
+/// (enabling quick seeking lowers CPU utilization but causes a minor sound
+///  quality compromising)
+#define SETTING_USE_QUICKSEEK       2
+
+/// Time-stretch algorithm single processing sequence length in milliseconds. This determines 
+/// to how long sequences the original sound is chopped in the time-stretch algorithm. 
+/// See "STTypes.h" or README for more information.
+#define SETTING_SEQUENCE_MS         3
+
+/// Time-stretch algorithm seeking window length in milliseconds for algorithm that finds the 
+/// best possible overlapping location. This determines from how wide window the algorithm 
+/// may look for an optimal joining location when mixing the sound sequences back together. 
+/// See "STTypes.h" or README for more information.
+#define SETTING_SEEKWINDOW_MS       4
+
+/// Time-stretch algorithm overlap length in milliseconds. When the chopped sound sequences 
+/// are mixed back together, to form a continuous sound stream, this parameter defines over 
+/// how long period the two consecutive sequences are let to overlap each other. 
+/// See "STTypes.h" or README for more information.
+#define SETTING_OVERLAP_MS          5
+
+
+/// Call "getSetting" with this ID to query processing sequence size in samples. 
+/// This value gives approximate value of how many input samples you'll need to 
+/// feed into SoundTouch after initial buffering to get out a new batch of
+/// output samples. 
+///
+/// This value does not include initial buffering at beginning of a new processing 
+/// stream, use SETTING_INITIAL_LATENCY to get the initial buffering size.
+///
+/// Notices: 
+/// - This is read-only parameter, i.e. setSetting ignores this parameter
+/// - This parameter value is not constant but change depending on 
+///   tempo/pitch/rate/samplerate settings.
+#define SETTING_NOMINAL_INPUT_SEQUENCE      6
+
+
+/// Call "getSetting" with this ID to query nominal average processing output 
+/// size in samples. This value tells approcimate value how many output samples 
+/// SoundTouch outputs once it does DSP processing run for a batch of input samples.
+///
+/// Notices: 
+/// - This is read-only parameter, i.e. setSetting ignores this parameter
+/// - This parameter value is not constant but change depending on 
+///   tempo/pitch/rate/samplerate settings.
+#define SETTING_NOMINAL_OUTPUT_SEQUENCE     7
+
+
+/// Call "getSetting" with this ID to query initial processing latency, i.e.
+/// approx. how many samples you'll need to enter to SoundTouch pipeline before 
+/// you can expect to get first batch of ready output samples out. 
+///
+/// After the first output batch, you can then expect to get approx. 
+/// SETTING_NOMINAL_OUTPUT_SEQUENCE ready samples out for every
+/// SETTING_NOMINAL_INPUT_SEQUENCE samples that you enter into SoundTouch.
+///
+/// Example:
+///     processing with parameter -tempo=5
+///     => initial latency = 5509 samples
+///        input sequence  = 4167 samples
+///        output sequence = 3969 samples
+///
+/// Accordingly, you can expect to feed in approx. 5509 samples at beginning of 
+/// the stream, and then you'll get out the first 3969 samples. After that, for 
+/// every approx. 4167 samples that you'll put in, you'll receive again approx. 
+/// 3969 samples out.
+///
+/// This also means that average latency during stream processing is 
+/// INITIAL_LATENCY-OUTPUT_SEQUENCE/2, in the above example case 5509-3969/2 
+/// = 3524 samples
+/// 
+/// Notices: 
+/// - This is read-only parameter, i.e. setSetting ignores this parameter
+/// - This parameter value is not constant but change depending on 
+///   tempo/pitch/rate/samplerate settings.
+#define SETTING_INITIAL_LATENCY             8
+
+
+class SOUNDTOUCH_API SoundTouch : public FIFOProcessor
+{
+private:
+    /// Rate transposer class instance
+    class RateTransposer *pRateTransposer;
+
+    /// Time-stretch class instance
+    class TDStretch *pTDStretch;
+
+    /// Virtual pitch parameter. Effective rate & tempo are calculated from these parameters.
+    double virtualRate;
+
+    /// Virtual pitch parameter. Effective rate & tempo are calculated from these parameters.
+    double virtualTempo;
+
+    /// Virtual pitch parameter. Effective rate & tempo are calculated from these parameters.
+    double virtualPitch;
+
+    /// Flag: Has sample rate been set?
+    bool  bSrateSet;
+
+    /// Accumulator for how many samples in total will be expected as output vs. samples put in,
+    /// considering current processing settings.
+    double samplesExpectedOut;
+
+    /// Accumulator for how many samples in total have been read out from the processing so far
+    long   samplesOutput;
+
+    /// Calculates effective rate & tempo valuescfrom 'virtualRate', 'virtualTempo' and 
+    /// 'virtualPitch' parameters.
+    void calcEffectiveRateAndTempo();
+
+protected :
+    /// Number of channels
+    uint  channels;
+
+    /// Effective 'rate' value calculated from 'virtualRate', 'virtualTempo' and 'virtualPitch'
+    double rate;
+
+    /// Effective 'tempo' value calculated from 'virtualRate', 'virtualTempo' and 'virtualPitch'
+    double tempo;
+
+public:
+    SoundTouch();
+    virtual ~SoundTouch();
+
+    /// Get SoundTouch library version string
+    static const char *getVersionString();
+
+    /// Get SoundTouch library version Id
+    static uint getVersionId();
+
+    /// Sets new rate control value. Normal rate = 1.0, smaller values
+    /// represent slower rate, larger faster rates.
+    void setRate(double newRate);
+
+    /// Sets new tempo control value. Normal tempo = 1.0, smaller values
+    /// represent slower tempo, larger faster tempo.
+    void setTempo(double newTempo);
+
+    /// Sets new rate control value as a difference in percents compared
+    /// to the original rate (-50 .. +100 %)
+    void setRateChange(double newRate);
+
+    /// Sets new tempo control value as a difference in percents compared
+    /// to the original tempo (-50 .. +100 %)
+    void setTempoChange(double newTempo);
+
+    /// Sets new pitch control value. Original pitch = 1.0, smaller values
+    /// represent lower pitches, larger values higher pitch.
+    void setPitch(double newPitch);
+
+    /// Sets pitch change in octaves compared to the original pitch  
+    /// (-1.00 .. +1.00)
+    void setPitchOctaves(double newPitch);
+
+    /// Sets pitch change in semi-tones compared to the original pitch
+    /// (-12 .. +12)
+    void setPitchSemiTones(int newPitch);
+    void setPitchSemiTones(double newPitch);
+
+    /// Sets the number of channels, 1 = mono, 2 = stereo
+    void setChannels(uint numChannels);
+
+    /// Sets sample rate.
+    void setSampleRate(uint srate);
+
+    /// Get ratio between input and output audio durations, useful for calculating
+    /// processed output duration: if you'll process a stream of N samples, then 
+    /// you can expect to get out N * getInputOutputSampleRatio() samples.
+    ///
+    /// This ratio will give accurate target duration ratio for a full audio track, 
+    /// given that the the whole track is processed with same processing parameters.
+    /// 
+    /// If this ratio is applied to calculate intermediate offsets inside a processing
+    /// stream, then this ratio is approximate and can deviate +- some tens of milliseconds 
+    /// from ideal offset, yet by end of the audio stream the duration ratio will become
+    /// exact.
+    ///
+    /// Example: if processing with parameters "-tempo=15 -pitch=-3", the function
+    /// will return value 0.8695652... Now, if processing an audio stream whose duration
+    /// is exactly one million audio samples, then you can expect the processed 
+    /// output duration  be 0.869565 * 1000000 = 869565 samples.
+    double getInputOutputSampleRatio();
+
+    /// Flushes the last samples from the processing pipeline to the output.
+    /// Clears also the internal processing buffers.
+    //
+    /// Note: This function is meant for extracting the last samples of a sound
+    /// stream. This function may introduce additional blank samples in the end
+    /// of the sound stream, and thus it's not recommended to call this function
+    /// in the middle of a sound stream.
+    void flush();
+
+    /// Adds 'numSamples' pcs of samples from the 'samples' memory position into
+    /// the input of the object. Notice that sample rate _has_to_ be set before
+    /// calling this function, otherwise throws a runtime_error exception.
+    virtual void putSamples(
+            const SAMPLETYPE *samples,  ///< Pointer to sample buffer.
+            uint numSamples                         ///< Number of samples in buffer. Notice
+                                                    ///< that in case of stereo-sound a single sample
+                                                    ///< contains data for both channels.
+            );
+
+    /// Output samples from beginning of the sample buffer. Copies requested samples to 
+    /// output buffer and removes them from the sample buffer. If there are less than 
+    /// 'numsample' samples in the buffer, returns all that available.
+    ///
+    /// \return Number of samples returned.
+    virtual uint receiveSamples(SAMPLETYPE *output, ///< Buffer where to copy output samples.
+        uint maxSamples                 ///< How many samples to receive at max.
+        );
+
+    /// Adjusts book-keeping so that given number of samples are removed from beginning of the 
+    /// sample buffer without copying them anywhere. 
+    ///
+    /// Used to reduce the number of samples in the buffer when accessing the sample buffer directly
+    /// with 'ptrBegin' function.
+    virtual uint receiveSamples(uint maxSamples   ///< Remove this many samples from the beginning of pipe.
+        );
+
+    /// Clears all the samples in the object's output and internal processing
+    /// buffers.
+    virtual void clear();
+
+    /// Changes a setting controlling the processing system behaviour. See the
+    /// 'SETTING_...' defines for available setting ID's.
+    /// 
+    /// \return 'true' if the setting was successfully changed
+    bool setSetting(int settingId,   ///< Setting ID number. see SETTING_... defines.
+                    int value        ///< New setting value.
+                    );
+
+    /// Reads a setting controlling the processing system behaviour. See the
+    /// 'SETTING_...' defines for available setting ID's.
+    ///
+    /// \return the setting value.
+    int getSetting(int settingId    ///< Setting ID number, see SETTING_... defines.
+                   ) const;
+
+    /// Returns number of samples currently unprocessed.
+    virtual uint numUnprocessedSamples() const;
+
+    /// Return number of channels
+    uint numChannels() const
+    {
+        return channels;
+    }
+
+    /// Other handy functions that are implemented in the ancestor classes (see
+    /// classes 'FIFOProcessor' and 'FIFOSamplePipe')
+    ///
+    /// - receiveSamples() : Use this function to receive 'ready' processed samples from SoundTouch.
+    /// - numSamples()     : Get number of 'ready' samples that can be received with 
+    ///                      function 'receiveSamples()'
+    /// - isEmpty()        : Returns nonzero if there aren't any 'ready' samples.
+    /// - clear()          : Clears all samples from ready/processing buffers.
+};
+
+}
+#endif