Adding upstream version 115.7.0esr.upstream/115.7.0esrupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 786 insertions, 0 deletions

diff --git a/third_party/aom/av1/common/thread_common.c b/third_party/aom/av1/common/thread_common.c
new file mode 100644
index 0000000000..8df4c9a09d
--- /dev/null
+++ b/third_party/aom/av1/common/thread_common.c
@@ -0,0 +1,786 @@
+/*
+ * Copyright (c) 2016, Alliance for Open Media. All rights reserved
+ *
+ * This source code is subject to the terms of the BSD 2 Clause License and
+ * the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License
+ * was not distributed with this source code in the LICENSE file, you can
+ * obtain it at www.aomedia.org/license/software. If the Alliance for Open
+ * Media Patent License 1.0 was not distributed with this source code in the
+ * PATENTS file, you can obtain it at www.aomedia.org/license/patent.
+ */
+
+#include "config/aom_config.h"
+#include "config/aom_scale_rtcd.h"
+
+#include "aom_dsp/aom_dsp_common.h"
+#include "aom_mem/aom_mem.h"
+#include "av1/common/av1_loopfilter.h"
+#include "av1/common/entropymode.h"
+#include "av1/common/thread_common.h"
+#include "av1/common/reconinter.h"
+
+// Set up nsync by width.
+static INLINE int get_sync_range(int width) {
+  // nsync numbers are picked by testing. For example, for 4k
+  // video, using 4 gives best performance.
+  if (width < 640)
+    return 1;
+  else if (width <= 1280)
+    return 2;
+  else if (width <= 4096)
+    return 4;
+  else
+    return 8;
+}
+
+static INLINE int get_lr_sync_range(int width) {
+#if 0
+  // nsync numbers are picked by testing. For example, for 4k
+  // video, using 4 gives best performance.
+  if (width < 640)
+    return 1;
+  else if (width <= 1280)
+    return 2;
+  else if (width <= 4096)
+    return 4;
+  else
+    return 8;
+#else
+  (void)width;
+  return 1;
+#endif
+}
+
+// Allocate memory for lf row synchronization
+static void loop_filter_alloc(AV1LfSync *lf_sync, AV1_COMMON *cm, int rows,
+                              int width, int num_workers) {
+  lf_sync->rows = rows;
+#if CONFIG_MULTITHREAD
+  {
+    int i, j;
+
+    for (j = 0; j < MAX_MB_PLANE; j++) {
+      CHECK_MEM_ERROR(cm, lf_sync->mutex_[j],
+                      aom_malloc(sizeof(*(lf_sync->mutex_[j])) * rows));
+      if (lf_sync->mutex_[j]) {
+        for (i = 0; i < rows; ++i) {
+          pthread_mutex_init(&lf_sync->mutex_[j][i], NULL);
+        }
+      }
+
+      CHECK_MEM_ERROR(cm, lf_sync->cond_[j],
+                      aom_malloc(sizeof(*(lf_sync->cond_[j])) * rows));
+      if (lf_sync->cond_[j]) {
+        for (i = 0; i < rows; ++i) {
+          pthread_cond_init(&lf_sync->cond_[j][i], NULL);
+        }
+      }
+    }
+
+    CHECK_MEM_ERROR(cm, lf_sync->job_mutex,
+                    aom_malloc(sizeof(*(lf_sync->job_mutex))));
+    if (lf_sync->job_mutex) {
+      pthread_mutex_init(lf_sync->job_mutex, NULL);
+    }
+  }
+#endif  // CONFIG_MULTITHREAD
+  CHECK_MEM_ERROR(cm, lf_sync->lfdata,
+                  aom_malloc(num_workers * sizeof(*(lf_sync->lfdata))));
+  lf_sync->num_workers = num_workers;
+
+  for (int j = 0; j < MAX_MB_PLANE; j++) {
+    CHECK_MEM_ERROR(cm, lf_sync->cur_sb_col[j],
+                    aom_malloc(sizeof(*(lf_sync->cur_sb_col[j])) * rows));
+  }
+  CHECK_MEM_ERROR(
+      cm, lf_sync->job_queue,
+      aom_malloc(sizeof(*(lf_sync->job_queue)) * rows * MAX_MB_PLANE * 2));
+  // Set up nsync.
+  lf_sync->sync_range = get_sync_range(width);
+}
+
+// Deallocate lf synchronization related mutex and data
+void av1_loop_filter_dealloc(AV1LfSync *lf_sync) {
+  if (lf_sync != NULL) {
+    int j;
+#if CONFIG_MULTITHREAD
+    int i;
+    for (j = 0; j < MAX_MB_PLANE; j++) {
+      if (lf_sync->mutex_[j] != NULL) {
+        for (i = 0; i < lf_sync->rows; ++i) {
+          pthread_mutex_destroy(&lf_sync->mutex_[j][i]);
+        }
+        aom_free(lf_sync->mutex_[j]);
+      }
+      if (lf_sync->cond_[j] != NULL) {
+        for (i = 0; i < lf_sync->rows; ++i) {
+          pthread_cond_destroy(&lf_sync->cond_[j][i]);
+        }
+        aom_free(lf_sync->cond_[j]);
+      }
+    }
+    if (lf_sync->job_mutex != NULL) {
+      pthread_mutex_destroy(lf_sync->job_mutex);
+      aom_free(lf_sync->job_mutex);
+    }
+#endif  // CONFIG_MULTITHREAD
+    aom_free(lf_sync->lfdata);
+    for (j = 0; j < MAX_MB_PLANE; j++) {
+      aom_free(lf_sync->cur_sb_col[j]);
+    }
+
+    aom_free(lf_sync->job_queue);
+    // clear the structure as the source of this call may be a resize in which
+    // case this call will be followed by an _alloc() which may fail.
+    av1_zero(*lf_sync);
+  }
+}
+
+static void loop_filter_data_reset(LFWorkerData *lf_data,
+                                   YV12_BUFFER_CONFIG *frame_buffer,
+                                   struct AV1Common *cm, MACROBLOCKD *xd) {
+  struct macroblockd_plane *pd = xd->plane;
+  lf_data->frame_buffer = frame_buffer;
+  lf_data->cm = cm;
+  lf_data->xd = xd;
+  for (int i = 0; i < MAX_MB_PLANE; i++) {
+    memcpy(&lf_data->planes[i].dst, &pd[i].dst, sizeof(lf_data->planes[i].dst));
+    lf_data->planes[i].subsampling_x = pd[i].subsampling_x;
+    lf_data->planes[i].subsampling_y = pd[i].subsampling_y;
+  }
+}
+
+static INLINE void sync_read(AV1LfSync *const lf_sync, int r, int c,
+                             int plane) {
+#if CONFIG_MULTITHREAD
+  const int nsync = lf_sync->sync_range;
+
+  if (r && !(c & (nsync - 1))) {
+    pthread_mutex_t *const mutex = &lf_sync->mutex_[plane][r - 1];
+    pthread_mutex_lock(mutex);
+
+    while (c > lf_sync->cur_sb_col[plane][r - 1] - nsync) {
+      pthread_cond_wait(&lf_sync->cond_[plane][r - 1], mutex);
+    }
+    pthread_mutex_unlock(mutex);
+  }
+#else
+  (void)lf_sync;
+  (void)r;
+  (void)c;
+  (void)plane;
+#endif  // CONFIG_MULTITHREAD
+}
+
+static INLINE void sync_write(AV1LfSync *const lf_sync, int r, int c,
+                              const int sb_cols, int plane) {
+#if CONFIG_MULTITHREAD
+  const int nsync = lf_sync->sync_range;
+  int cur;
+  // Only signal when there are enough filtered SB for next row to run.
+  int sig = 1;
+
+  if (c < sb_cols - 1) {
+    cur = c;
+    if (c % nsync) sig = 0;
+  } else {
+    cur = sb_cols + nsync;
+  }
+
+  if (sig) {
+    pthread_mutex_lock(&lf_sync->mutex_[plane][r]);
+
+    lf_sync->cur_sb_col[plane][r] = cur;
+
+    pthread_cond_broadcast(&lf_sync->cond_[plane][r]);
+    pthread_mutex_unlock(&lf_sync->mutex_[plane][r]);
+  }
+#else
+  (void)lf_sync;
+  (void)r;
+  (void)c;
+  (void)sb_cols;
+  (void)plane;
+#endif  // CONFIG_MULTITHREAD
+}
+
+static void enqueue_lf_jobs(AV1LfSync *lf_sync, AV1_COMMON *cm, int start,
+                            int stop, int plane_start, int plane_end) {
+  int mi_row, plane, dir;
+  AV1LfMTInfo *lf_job_queue = lf_sync->job_queue;
+  lf_sync->jobs_enqueued = 0;
+  lf_sync->jobs_dequeued = 0;
+
+  for (dir = 0; dir < 2; dir++) {
+    for (plane = plane_start; plane < plane_end; plane++) {
+      if (plane == 0 && !(cm->lf.filter_level[0]) && !(cm->lf.filter_level[1]))
+        break;
+      else if (plane == 1 && !(cm->lf.filter_level_u))
+        continue;
+      else if (plane == 2 && !(cm->lf.filter_level_v))
+        continue;
+      for (mi_row = start; mi_row < stop; mi_row += MAX_MIB_SIZE) {
+        lf_job_queue->mi_row = mi_row;
+        lf_job_queue->plane = plane;
+        lf_job_queue->dir = dir;
+        lf_job_queue++;
+        lf_sync->jobs_enqueued++;
+      }
+    }
+  }
+}
+
+AV1LfMTInfo *get_lf_job_info(AV1LfSync *lf_sync) {
+  AV1LfMTInfo *cur_job_info = NULL;
+
+#if CONFIG_MULTITHREAD
+  pthread_mutex_lock(lf_sync->job_mutex);
+
+  if (lf_sync->jobs_dequeued < lf_sync->jobs_enqueued) {
+    cur_job_info = lf_sync->job_queue + lf_sync->jobs_dequeued;
+    lf_sync->jobs_dequeued++;
+  }
+
+  pthread_mutex_unlock(lf_sync->job_mutex);
+#else
+  (void)lf_sync;
+#endif
+
+  return cur_job_info;
+}
+
+// Implement row loopfiltering for each thread.
+static INLINE void thread_loop_filter_rows(
+    const YV12_BUFFER_CONFIG *const frame_buffer, AV1_COMMON *const cm,
+    struct macroblockd_plane *planes, MACROBLOCKD *xd,
+    AV1LfSync *const lf_sync) {
+  const int sb_cols =
+      ALIGN_POWER_OF_TWO(cm->mi_cols, MAX_MIB_SIZE_LOG2) >> MAX_MIB_SIZE_LOG2;
+  int mi_row, mi_col, plane, dir;
+  int r, c;
+
+  while (1) {
+    AV1LfMTInfo *cur_job_info = get_lf_job_info(lf_sync);
+
+    if (cur_job_info != NULL) {
+      mi_row = cur_job_info->mi_row;
+      plane = cur_job_info->plane;
+      dir = cur_job_info->dir;
+      r = mi_row >> MAX_MIB_SIZE_LOG2;
+
+      if (dir == 0) {
+        for (mi_col = 0; mi_col < cm->mi_cols; mi_col += MAX_MIB_SIZE) {
+          c = mi_col >> MAX_MIB_SIZE_LOG2;
+
+          av1_setup_dst_planes(planes, cm->seq_params.sb_size, frame_buffer,
+                               mi_row, mi_col, plane, plane + 1);
+
+          av1_filter_block_plane_vert(cm, xd, plane, &planes[plane], mi_row,
+                                      mi_col);
+          sync_write(lf_sync, r, c, sb_cols, plane);
+        }
+      } else if (dir == 1) {
+        for (mi_col = 0; mi_col < cm->mi_cols; mi_col += MAX_MIB_SIZE) {
+          c = mi_col >> MAX_MIB_SIZE_LOG2;
+
+          // Wait for vertical edge filtering of the top-right block to be
+          // completed
+          sync_read(lf_sync, r, c, plane);
+
+          // Wait for vertical edge filtering of the right block to be
+          // completed
+          sync_read(lf_sync, r + 1, c, plane);
+
+          av1_setup_dst_planes(planes, cm->seq_params.sb_size, frame_buffer,
+                               mi_row, mi_col, plane, plane + 1);
+          av1_filter_block_plane_horz(cm, xd, plane, &planes[plane], mi_row,
+                                      mi_col);
+        }
+      }
+    } else {
+      break;
+    }
+  }
+}
+
+// Row-based multi-threaded loopfilter hook
+static int loop_filter_row_worker(void *arg1, void *arg2) {
+  AV1LfSync *const lf_sync = (AV1LfSync *)arg1;
+  LFWorkerData *const lf_data = (LFWorkerData *)arg2;
+  thread_loop_filter_rows(lf_data->frame_buffer, lf_data->cm, lf_data->planes,
+                          lf_data->xd, lf_sync);
+  return 1;
+}
+
+static void loop_filter_rows_mt(YV12_BUFFER_CONFIG *frame, AV1_COMMON *cm,
+                                MACROBLOCKD *xd, int start, int stop,
+                                int plane_start, int plane_end,
+                                AVxWorker *workers, int nworkers,
+                                AV1LfSync *lf_sync) {
+  const AVxWorkerInterface *const winterface = aom_get_worker_interface();
+  // Number of superblock rows and cols
+  const int sb_rows =
+      ALIGN_POWER_OF_TWO(cm->mi_rows, MAX_MIB_SIZE_LOG2) >> MAX_MIB_SIZE_LOG2;
+  const int num_workers = nworkers;
+  int i;
+
+  if (!lf_sync->sync_range || sb_rows != lf_sync->rows ||
+      num_workers > lf_sync->num_workers) {
+    av1_loop_filter_dealloc(lf_sync);
+    loop_filter_alloc(lf_sync, cm, sb_rows, cm->width, num_workers);
+  }
+
+  // Initialize cur_sb_col to -1 for all SB rows.
+  for (i = 0; i < MAX_MB_PLANE; i++) {
+    memset(lf_sync->cur_sb_col[i], -1,
+           sizeof(*(lf_sync->cur_sb_col[i])) * sb_rows);
+  }
+
+  enqueue_lf_jobs(lf_sync, cm, start, stop, plane_start, plane_end);
+
+  // Set up loopfilter thread data.
+  for (i = 0; i < num_workers; ++i) {
+    AVxWorker *const worker = &workers[i];
+    LFWorkerData *const lf_data = &lf_sync->lfdata[i];
+
+    worker->hook = loop_filter_row_worker;
+    worker->data1 = lf_sync;
+    worker->data2 = lf_data;
+
+    // Loopfilter data
+    loop_filter_data_reset(lf_data, frame, cm, xd);
+
+    // Start loopfiltering
+    if (i == num_workers - 1) {
+      winterface->execute(worker);
+    } else {
+      winterface->launch(worker);
+    }
+  }
+
+  // Wait till all rows are finished
+  for (i = 0; i < num_workers; ++i) {
+    winterface->sync(&workers[i]);
+  }
+}
+
+void av1_loop_filter_frame_mt(YV12_BUFFER_CONFIG *frame, AV1_COMMON *cm,
+                              MACROBLOCKD *xd, int plane_start, int plane_end,
+                              int partial_frame, AVxWorker *workers,
+                              int num_workers, AV1LfSync *lf_sync) {
+  int start_mi_row, end_mi_row, mi_rows_to_filter;
+
+  start_mi_row = 0;
+  mi_rows_to_filter = cm->mi_rows;
+  if (partial_frame && cm->mi_rows > 8) {
+    start_mi_row = cm->mi_rows >> 1;
+    start_mi_row &= 0xfffffff8;
+    mi_rows_to_filter = AOMMAX(cm->mi_rows / 8, 8);
+  }
+  end_mi_row = start_mi_row + mi_rows_to_filter;
+  av1_loop_filter_frame_init(cm, plane_start, plane_end);
+
+  loop_filter_rows_mt(frame, cm, xd, start_mi_row, end_mi_row, plane_start,
+                      plane_end, workers, num_workers, lf_sync);
+}
+
+static INLINE void lr_sync_read(void *const lr_sync, int r, int c, int plane) {
+#if CONFIG_MULTITHREAD
+  AV1LrSync *const loop_res_sync = (AV1LrSync *)lr_sync;
+  const int nsync = loop_res_sync->sync_range;
+
+  if (r && !(c & (nsync - 1))) {
+    pthread_mutex_t *const mutex = &loop_res_sync->mutex_[plane][r - 1];
+    pthread_mutex_lock(mutex);
+
+    while (c > loop_res_sync->cur_sb_col[plane][r - 1] - nsync) {
+      pthread_cond_wait(&loop_res_sync->cond_[plane][r - 1], mutex);
+    }
+    pthread_mutex_unlock(mutex);
+  }
+#else
+  (void)lr_sync;
+  (void)r;
+  (void)c;
+  (void)plane;
+#endif  // CONFIG_MULTITHREAD
+}
+
+static INLINE void lr_sync_write(void *const lr_sync, int r, int c,
+                                 const int sb_cols, int plane) {
+#if CONFIG_MULTITHREAD
+  AV1LrSync *const loop_res_sync = (AV1LrSync *)lr_sync;
+  const int nsync = loop_res_sync->sync_range;
+  int cur;
+  // Only signal when there are enough filtered SB for next row to run.
+  int sig = 1;
+
+  if (c < sb_cols - 1) {
+    cur = c;
+    if (c % nsync) sig = 0;
+  } else {
+    cur = sb_cols + nsync;
+  }
+
+  if (sig) {
+    pthread_mutex_lock(&loop_res_sync->mutex_[plane][r]);
+
+    loop_res_sync->cur_sb_col[plane][r] = cur;
+
+    pthread_cond_broadcast(&loop_res_sync->cond_[plane][r]);
+    pthread_mutex_unlock(&loop_res_sync->mutex_[plane][r]);
+  }
+#else
+  (void)lr_sync;
+  (void)r;
+  (void)c;
+  (void)sb_cols;
+  (void)plane;
+#endif  // CONFIG_MULTITHREAD
+}
+
+// Allocate memory for loop restoration row synchronization
+static void loop_restoration_alloc(AV1LrSync *lr_sync, AV1_COMMON *cm,
+                                   int num_workers, int num_rows_lr,
+                                   int num_planes, int width) {
+  lr_sync->rows = num_rows_lr;
+  lr_sync->num_planes = num_planes;
+#if CONFIG_MULTITHREAD
+  {
+    int i, j;
+
+    for (j = 0; j < num_planes; j++) {
+      CHECK_MEM_ERROR(cm, lr_sync->mutex_[j],
+                      aom_malloc(sizeof(*(lr_sync->mutex_[j])) * num_rows_lr));
+      if (lr_sync->mutex_[j]) {
+        for (i = 0; i < num_rows_lr; ++i) {
+          pthread_mutex_init(&lr_sync->mutex_[j][i], NULL);
+        }
+      }
+
+      CHECK_MEM_ERROR(cm, lr_sync->cond_[j],
+                      aom_malloc(sizeof(*(lr_sync->cond_[j])) * num_rows_lr));
+      if (lr_sync->cond_[j]) {
+        for (i = 0; i < num_rows_lr; ++i) {
+          pthread_cond_init(&lr_sync->cond_[j][i], NULL);
+        }
+      }
+    }
+
+    CHECK_MEM_ERROR(cm, lr_sync->job_mutex,
+                    aom_malloc(sizeof(*(lr_sync->job_mutex))));
+    if (lr_sync->job_mutex) {
+      pthread_mutex_init(lr_sync->job_mutex, NULL);
+    }
+  }
+#endif  // CONFIG_MULTITHREAD
+  CHECK_MEM_ERROR(cm, lr_sync->lrworkerdata,
+                  aom_malloc(num_workers * sizeof(*(lr_sync->lrworkerdata))));
+
+  for (int worker_idx = 0; worker_idx < num_workers; ++worker_idx) {
+    if (worker_idx < num_workers - 1) {
+      CHECK_MEM_ERROR(cm, lr_sync->lrworkerdata[worker_idx].rst_tmpbuf,
+                      (int32_t *)aom_memalign(16, RESTORATION_TMPBUF_SIZE));
+      CHECK_MEM_ERROR(cm, lr_sync->lrworkerdata[worker_idx].rlbs,
+                      aom_malloc(sizeof(RestorationLineBuffers)));
+
+    } else {
+      lr_sync->lrworkerdata[worker_idx].rst_tmpbuf = cm->rst_tmpbuf;
+      lr_sync->lrworkerdata[worker_idx].rlbs = cm->rlbs;
+    }
+  }
+
+  lr_sync->num_workers = num_workers;
+
+  for (int j = 0; j < num_planes; j++) {
+    CHECK_MEM_ERROR(
+        cm, lr_sync->cur_sb_col[j],
+        aom_malloc(sizeof(*(lr_sync->cur_sb_col[j])) * num_rows_lr));
+  }
+  CHECK_MEM_ERROR(
+      cm, lr_sync->job_queue,
+      aom_malloc(sizeof(*(lr_sync->job_queue)) * num_rows_lr * num_planes));
+  // Set up nsync.
+  lr_sync->sync_range = get_lr_sync_range(width);
+}
+
+// Deallocate loop restoration synchronization related mutex and data
+void av1_loop_restoration_dealloc(AV1LrSync *lr_sync, int num_workers) {
+  if (lr_sync != NULL) {
+    int j;
+#if CONFIG_MULTITHREAD
+    int i;
+    for (j = 0; j < MAX_MB_PLANE; j++) {
+      if (lr_sync->mutex_[j] != NULL) {
+        for (i = 0; i < lr_sync->rows; ++i) {
+          pthread_mutex_destroy(&lr_sync->mutex_[j][i]);
+        }
+        aom_free(lr_sync->mutex_[j]);
+      }
+      if (lr_sync->cond_[j] != NULL) {
+        for (i = 0; i < lr_sync->rows; ++i) {
+          pthread_cond_destroy(&lr_sync->cond_[j][i]);
+        }
+        aom_free(lr_sync->cond_[j]);
+      }
+    }
+    if (lr_sync->job_mutex != NULL) {
+      pthread_mutex_destroy(lr_sync->job_mutex);
+      aom_free(lr_sync->job_mutex);
+    }
+#endif  // CONFIG_MULTITHREAD
+    for (j = 0; j < MAX_MB_PLANE; j++) {
+      aom_free(lr_sync->cur_sb_col[j]);
+    }
+
+    aom_free(lr_sync->job_queue);
+
+    if (lr_sync->lrworkerdata) {
+      for (int worker_idx = 0; worker_idx < num_workers - 1; worker_idx++) {
+        LRWorkerData *const workerdata_data =
+            lr_sync->lrworkerdata + worker_idx;
+
+        aom_free(workerdata_data->rst_tmpbuf);
+        aom_free(workerdata_data->rlbs);
+      }
+      aom_free(lr_sync->lrworkerdata);
+    }
+
+    // clear the structure as the source of this call may be a resize in which
+    // case this call will be followed by an _alloc() which may fail.
+    av1_zero(*lr_sync);
+  }
+}
+
+static void enqueue_lr_jobs(AV1LrSync *lr_sync, AV1LrStruct *lr_ctxt,
+                            AV1_COMMON *cm) {
+  FilterFrameCtxt *ctxt = lr_ctxt->ctxt;
+
+  const int num_planes = av1_num_planes(cm);
+  AV1LrMTInfo *lr_job_queue = lr_sync->job_queue;
+  int32_t lr_job_counter[2], num_even_lr_jobs = 0;
+  lr_sync->jobs_enqueued = 0;
+  lr_sync->jobs_dequeued = 0;
+
+  for (int plane = 0; plane < num_planes; plane++) {
+    if (cm->rst_info[plane].frame_restoration_type == RESTORE_NONE) continue;
+    num_even_lr_jobs =
+        num_even_lr_jobs + ((ctxt[plane].rsi->vert_units_per_tile + 1) >> 1);
+  }
+  lr_job_counter[0] = 0;
+  lr_job_counter[1] = num_even_lr_jobs;
+
+  for (int plane = 0; plane < num_planes; plane++) {
+    if (cm->rst_info[plane].frame_restoration_type == RESTORE_NONE) continue;
+    const int is_uv = plane > 0;
+    const int ss_y = is_uv && cm->seq_params.subsampling_y;
+
+    AV1PixelRect tile_rect = ctxt[plane].tile_rect;
+    const int unit_size = ctxt[plane].rsi->restoration_unit_size;
+
+    const int tile_h = tile_rect.bottom - tile_rect.top;
+    const int ext_size = unit_size * 3 / 2;
+
+    int y0 = 0, i = 0;
+    while (y0 < tile_h) {
+      int remaining_h = tile_h - y0;
+      int h = (remaining_h < ext_size) ? remaining_h : unit_size;
+
+      RestorationTileLimits limits;
+      limits.v_start = tile_rect.top + y0;
+      limits.v_end = tile_rect.top + y0 + h;
+      assert(limits.v_end <= tile_rect.bottom);
+      // Offset the tile upwards to align with the restoration processing stripe
+      const int voffset = RESTORATION_UNIT_OFFSET >> ss_y;
+      limits.v_start = AOMMAX(tile_rect.top, limits.v_start - voffset);
+      if (limits.v_end < tile_rect.bottom) limits.v_end -= voffset;
+
+      assert(lr_job_counter[0] <= num_even_lr_jobs);
+
+      lr_job_queue[lr_job_counter[i & 1]].lr_unit_row = i;
+      lr_job_queue[lr_job_counter[i & 1]].plane = plane;
+      lr_job_queue[lr_job_counter[i & 1]].v_start = limits.v_start;
+      lr_job_queue[lr_job_counter[i & 1]].v_end = limits.v_end;
+      lr_job_queue[lr_job_counter[i & 1]].sync_mode = i & 1;
+      if ((i & 1) == 0) {
+        lr_job_queue[lr_job_counter[i & 1]].v_copy_start =
+            limits.v_start + RESTORATION_BORDER;
+        lr_job_queue[lr_job_counter[i & 1]].v_copy_end =
+            limits.v_end - RESTORATION_BORDER;
+        if (i == 0) {
+          assert(limits.v_start == tile_rect.top);
+          lr_job_queue[lr_job_counter[i & 1]].v_copy_start = tile_rect.top;
+        }
+        if (i == (ctxt[plane].rsi->vert_units_per_tile - 1)) {
+          assert(limits.v_end == tile_rect.bottom);
+          lr_job_queue[lr_job_counter[i & 1]].v_copy_end = tile_rect.bottom;
+        }
+      } else {
+        lr_job_queue[lr_job_counter[i & 1]].v_copy_start =
+            AOMMAX(limits.v_start - RESTORATION_BORDER, tile_rect.top);
+        lr_job_queue[lr_job_counter[i & 1]].v_copy_end =
+            AOMMIN(limits.v_end + RESTORATION_BORDER, tile_rect.bottom);
+      }
+      lr_job_counter[i & 1]++;
+      lr_sync->jobs_enqueued++;
+
+      y0 += h;
+      ++i;
+    }
+  }
+}
+
+AV1LrMTInfo *get_lr_job_info(AV1LrSync *lr_sync) {
+  AV1LrMTInfo *cur_job_info = NULL;
+
+#if CONFIG_MULTITHREAD
+  pthread_mutex_lock(lr_sync->job_mutex);
+
+  if (lr_sync->jobs_dequeued < lr_sync->jobs_enqueued) {
+    cur_job_info = lr_sync->job_queue + lr_sync->jobs_dequeued;
+    lr_sync->jobs_dequeued++;
+  }
+
+  pthread_mutex_unlock(lr_sync->job_mutex);
+#else
+  (void)lr_sync;
+#endif
+
+  return cur_job_info;
+}
+
+// Implement row loop restoration for each thread.
+static int loop_restoration_row_worker(void *arg1, void *arg2) {
+  AV1LrSync *const lr_sync = (AV1LrSync *)arg1;
+  LRWorkerData *lrworkerdata = (LRWorkerData *)arg2;
+  AV1LrStruct *lr_ctxt = (AV1LrStruct *)lrworkerdata->lr_ctxt;
+  FilterFrameCtxt *ctxt = lr_ctxt->ctxt;
+  int lr_unit_row;
+  int plane;
+  const int tile_row = LR_TILE_ROW;
+  const int tile_col = LR_TILE_COL;
+  const int tile_cols = LR_TILE_COLS;
+  const int tile_idx = tile_col + tile_row * tile_cols;
+  typedef void (*copy_fun)(const YV12_BUFFER_CONFIG *src_ybc,
+                           YV12_BUFFER_CONFIG *dst_ybc, int hstart, int hend,
+                           int vstart, int vend);
+  static const copy_fun copy_funs[3] = {
+    aom_yv12_partial_copy_y, aom_yv12_partial_copy_u, aom_yv12_partial_copy_v
+  };
+
+  while (1) {
+    AV1LrMTInfo *cur_job_info = get_lr_job_info(lr_sync);
+    if (cur_job_info != NULL) {
+      RestorationTileLimits limits;
+      sync_read_fn_t on_sync_read;
+      sync_write_fn_t on_sync_write;
+      limits.v_start = cur_job_info->v_start;
+      limits.v_end = cur_job_info->v_end;
+      lr_unit_row = cur_job_info->lr_unit_row;
+      plane = cur_job_info->plane;
+      const int unit_idx0 = tile_idx * ctxt[plane].rsi->units_per_tile;
+
+      // sync_mode == 1 implies only sync read is required in LR Multi-threading
+      // sync_mode == 0 implies only sync write is required.
+      on_sync_read =
+          cur_job_info->sync_mode == 1 ? lr_sync_read : av1_lr_sync_read_dummy;
+      on_sync_write = cur_job_info->sync_mode == 0 ? lr_sync_write
+                                                   : av1_lr_sync_write_dummy;
+
+      av1_foreach_rest_unit_in_row(
+          &limits, &(ctxt[plane].tile_rect), lr_ctxt->on_rest_unit, lr_unit_row,
+          ctxt[plane].rsi->restoration_unit_size, unit_idx0,
+          ctxt[plane].rsi->horz_units_per_tile,
+          ctxt[plane].rsi->vert_units_per_tile, plane, &ctxt[plane],
+          lrworkerdata->rst_tmpbuf, lrworkerdata->rlbs, on_sync_read,
+          on_sync_write, lr_sync);
+
+      copy_funs[plane](lr_ctxt->dst, lr_ctxt->frame, ctxt[plane].tile_rect.left,
+                       ctxt[plane].tile_rect.right, cur_job_info->v_copy_start,
+                       cur_job_info->v_copy_end);
+    } else {
+      break;
+    }
+  }
+  return 1;
+}
+
+static void foreach_rest_unit_in_planes_mt(AV1LrStruct *lr_ctxt,
+                                           AVxWorker *workers, int nworkers,
+                                           AV1LrSync *lr_sync, AV1_COMMON *cm) {
+  FilterFrameCtxt *ctxt = lr_ctxt->ctxt;
+
+  const int num_planes = av1_num_planes(cm);
+
+  const AVxWorkerInterface *const winterface = aom_get_worker_interface();
+  int num_rows_lr = 0;
+
+  for (int plane = 0; plane < num_planes; plane++) {
+    if (cm->rst_info[plane].frame_restoration_type == RESTORE_NONE) continue;
+
+    const AV1PixelRect tile_rect = ctxt[plane].tile_rect;
+    const int max_tile_h = tile_rect.bottom - tile_rect.top;
+
+    const int unit_size = cm->rst_info[plane].restoration_unit_size;
+
+    num_rows_lr =
+        AOMMAX(num_rows_lr, av1_lr_count_units_in_tile(unit_size, max_tile_h));
+  }
+
+  const int num_workers = nworkers;
+  int i;
+  assert(MAX_MB_PLANE == 3);
+
+  if (!lr_sync->sync_range || num_rows_lr != lr_sync->rows ||
+      num_workers > lr_sync->num_workers || num_planes != lr_sync->num_planes) {
+    av1_loop_restoration_dealloc(lr_sync, num_workers);
+    loop_restoration_alloc(lr_sync, cm, num_workers, num_rows_lr, num_planes,
+                           cm->width);
+  }
+
+  // Initialize cur_sb_col to -1 for all SB rows.
+  for (i = 0; i < num_planes; i++) {
+    memset(lr_sync->cur_sb_col[i], -1,
+           sizeof(*(lr_sync->cur_sb_col[i])) * num_rows_lr);
+  }
+
+  enqueue_lr_jobs(lr_sync, lr_ctxt, cm);
+
+  // Set up looprestoration thread data.
+  for (i = 0; i < num_workers; ++i) {
+    AVxWorker *const worker = &workers[i];
+    lr_sync->lrworkerdata[i].lr_ctxt = (void *)lr_ctxt;
+    worker->hook = loop_restoration_row_worker;
+    worker->data1 = lr_sync;
+    worker->data2 = &lr_sync->lrworkerdata[i];
+
+    // Start loopfiltering
+    if (i == num_workers - 1) {
+      winterface->execute(worker);
+    } else {
+      winterface->launch(worker);
+    }
+  }
+
+  // Wait till all rows are finished
+  for (i = 0; i < num_workers; ++i) {
+    winterface->sync(&workers[i]);
+  }
+}
+
+void av1_loop_restoration_filter_frame_mt(YV12_BUFFER_CONFIG *frame,
+                                          AV1_COMMON *cm, int optimized_lr,
+                                          AVxWorker *workers, int num_workers,
+                                          AV1LrSync *lr_sync, void *lr_ctxt) {
+  assert(!cm->all_lossless);
+
+  const int num_planes = av1_num_planes(cm);
+
+  AV1LrStruct *loop_rest_ctxt = (AV1LrStruct *)lr_ctxt;
+
+  av1_loop_restoration_filter_frame_init(loop_rest_ctxt, frame, cm,
+                                         optimized_lr, num_planes);
+
+  foreach_rest_unit_in_planes_mt(loop_rest_ctxt, workers, num_workers, lr_sync,
+                                 cm);
+}