Adding upstream version 115.7.0esr.upstream/115.7.0esrupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 690 insertions, 0 deletions

diff --git a/third_party/rust/tokio/src/net/tcp/socket.rs b/third_party/rust/tokio/src/net/tcp/socket.rs
new file mode 100644
index 0000000000..171e240189
--- /dev/null
+++ b/third_party/rust/tokio/src/net/tcp/socket.rs
@@ -0,0 +1,690 @@
+use crate::net::{TcpListener, TcpStream};
+
+use std::fmt;
+use std::io;
+use std::net::SocketAddr;
+
+#[cfg(unix)]
+use std::os::unix::io::{AsRawFd, FromRawFd, IntoRawFd, RawFd};
+#[cfg(windows)]
+use std::os::windows::io::{AsRawSocket, FromRawSocket, IntoRawSocket, RawSocket};
+use std::time::Duration;
+
+cfg_net! {
+    /// A TCP socket that has not yet been converted to a `TcpStream` or
+    /// `TcpListener`.
+    ///
+    /// `TcpSocket` wraps an operating system socket and enables the caller to
+    /// configure the socket before establishing a TCP connection or accepting
+    /// inbound connections. The caller is able to set socket option and explicitly
+    /// bind the socket with a socket address.
+    ///
+    /// The underlying socket is closed when the `TcpSocket` value is dropped.
+    ///
+    /// `TcpSocket` should only be used directly if the default configuration used
+    /// by `TcpStream::connect` and `TcpListener::bind` does not meet the required
+    /// use case.
+    ///
+    /// Calling `TcpStream::connect("127.0.0.1:8080")` is equivalent to:
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     let stream = socket.connect(addr).await?;
+    /// # drop(stream);
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    ///
+    /// Calling `TcpListener::bind("127.0.0.1:8080")` is equivalent to:
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     // On platforms with Berkeley-derived sockets, this allows to quickly
+    ///     // rebind a socket, without needing to wait for the OS to clean up the
+    ///     // previous one.
+    ///     //
+    ///     // On Windows, this allows rebinding sockets which are actively in use,
+    ///     // which allows “socket hijacking”, so we explicitly don't set it here.
+    ///     // https://docs.microsoft.com/en-us/windows/win32/winsock/using-so-reuseaddr-and-so-exclusiveaddruse
+    ///     socket.set_reuseaddr(true)?;
+    ///     socket.bind(addr)?;
+    ///
+    ///     let listener = socket.listen(1024)?;
+    /// # drop(listener);
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    ///
+    /// Setting socket options not explicitly provided by `TcpSocket` may be done by
+    /// accessing the `RawFd`/`RawSocket` using [`AsRawFd`]/[`AsRawSocket`] and
+    /// setting the option with a crate like [`socket2`].
+    ///
+    /// [`RawFd`]: https://doc.rust-lang.org/std/os/unix/io/type.RawFd.html
+    /// [`RawSocket`]: https://doc.rust-lang.org/std/os/windows/io/type.RawSocket.html
+    /// [`AsRawFd`]: https://doc.rust-lang.org/std/os/unix/io/trait.AsRawFd.html
+    /// [`AsRawSocket`]: https://doc.rust-lang.org/std/os/windows/io/trait.AsRawSocket.html
+    /// [`socket2`]: https://docs.rs/socket2/
+    #[cfg_attr(docsrs, doc(alias = "connect_std"))]
+    pub struct TcpSocket {
+        inner: socket2::Socket,
+    }
+}
+
+impl TcpSocket {
+    /// Creates a new socket configured for IPv4.
+    ///
+    /// Calls `socket(2)` with `AF_INET` and `SOCK_STREAM`.
+    ///
+    /// # Returns
+    ///
+    /// On success, the newly created `TcpSocket` is returned. If an error is
+    /// encountered, it is returned instead.
+    ///
+    /// # Examples
+    ///
+    /// Create a new IPv4 socket and start listening.
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     socket.bind(addr)?;
+    ///
+    ///     let listener = socket.listen(128)?;
+    /// # drop(listener);
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn new_v4() -> io::Result<TcpSocket> {
+        TcpSocket::new(socket2::Domain::IPV4)
+    }
+
+    /// Creates a new socket configured for IPv6.
+    ///
+    /// Calls `socket(2)` with `AF_INET6` and `SOCK_STREAM`.
+    ///
+    /// # Returns
+    ///
+    /// On success, the newly created `TcpSocket` is returned. If an error is
+    /// encountered, it is returned instead.
+    ///
+    /// # Examples
+    ///
+    /// Create a new IPv6 socket and start listening.
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "[::1]:8080".parse().unwrap();
+    ///     let socket = TcpSocket::new_v6()?;
+    ///     socket.bind(addr)?;
+    ///
+    ///     let listener = socket.listen(128)?;
+    /// # drop(listener);
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn new_v6() -> io::Result<TcpSocket> {
+        TcpSocket::new(socket2::Domain::IPV6)
+    }
+
+    fn new(domain: socket2::Domain) -> io::Result<TcpSocket> {
+        let ty = socket2::Type::STREAM;
+        #[cfg(any(
+            target_os = "android",
+            target_os = "dragonfly",
+            target_os = "freebsd",
+            target_os = "fuchsia",
+            target_os = "illumos",
+            target_os = "linux",
+            target_os = "netbsd",
+            target_os = "openbsd"
+        ))]
+        let ty = ty.nonblocking();
+        let inner = socket2::Socket::new(domain, ty, Some(socket2::Protocol::TCP))?;
+        #[cfg(not(any(
+            target_os = "android",
+            target_os = "dragonfly",
+            target_os = "freebsd",
+            target_os = "fuchsia",
+            target_os = "illumos",
+            target_os = "linux",
+            target_os = "netbsd",
+            target_os = "openbsd"
+        )))]
+        inner.set_nonblocking(true)?;
+        Ok(TcpSocket { inner })
+    }
+
+    /// Allows the socket to bind to an in-use address.
+    ///
+    /// Behavior is platform specific. Refer to the target platform's
+    /// documentation for more details.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     socket.set_reuseaddr(true)?;
+    ///     socket.bind(addr)?;
+    ///
+    ///     let listener = socket.listen(1024)?;
+    /// # drop(listener);
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn set_reuseaddr(&self, reuseaddr: bool) -> io::Result<()> {
+        self.inner.set_reuse_address(reuseaddr)
+    }
+
+    /// Retrieves the value set for `SO_REUSEADDR` on this socket.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     socket.set_reuseaddr(true)?;
+    ///     assert!(socket.reuseaddr().unwrap());
+    ///     socket.bind(addr)?;
+    ///
+    ///     let listener = socket.listen(1024)?;
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn reuseaddr(&self) -> io::Result<bool> {
+        self.inner.reuse_address()
+    }
+
+    /// Allows the socket to bind to an in-use port. Only available for unix systems
+    /// (excluding Solaris & Illumos).
+    ///
+    /// Behavior is platform specific. Refer to the target platform's
+    /// documentation for more details.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     socket.set_reuseport(true)?;
+    ///     socket.bind(addr)?;
+    ///
+    ///     let listener = socket.listen(1024)?;
+    ///     Ok(())
+    /// }
+    /// ```
+    #[cfg(all(unix, not(target_os = "solaris"), not(target_os = "illumos")))]
+    #[cfg_attr(
+        docsrs,
+        doc(cfg(all(unix, not(target_os = "solaris"), not(target_os = "illumos"))))
+    )]
+    pub fn set_reuseport(&self, reuseport: bool) -> io::Result<()> {
+        self.inner.set_reuse_port(reuseport)
+    }
+
+    /// Allows the socket to bind to an in-use port. Only available for unix systems
+    /// (excluding Solaris & Illumos).
+    ///
+    /// Behavior is platform specific. Refer to the target platform's
+    /// documentation for more details.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     socket.set_reuseport(true)?;
+    ///     assert!(socket.reuseport().unwrap());
+    ///     socket.bind(addr)?;
+    ///
+    ///     let listener = socket.listen(1024)?;
+    ///     Ok(())
+    /// }
+    /// ```
+    #[cfg(all(unix, not(target_os = "solaris"), not(target_os = "illumos")))]
+    #[cfg_attr(
+        docsrs,
+        doc(cfg(all(unix, not(target_os = "solaris"), not(target_os = "illumos"))))
+    )]
+    pub fn reuseport(&self) -> io::Result<bool> {
+        self.inner.reuse_port()
+    }
+
+    /// Sets the size of the TCP send buffer on this socket.
+    ///
+    /// On most operating systems, this sets the `SO_SNDBUF` socket option.
+    pub fn set_send_buffer_size(&self, size: u32) -> io::Result<()> {
+        self.inner.set_send_buffer_size(size as usize)
+    }
+
+    /// Returns the size of the TCP send buffer for this socket.
+    ///
+    /// On most operating systems, this is the value of the `SO_SNDBUF` socket
+    /// option.
+    ///
+    /// Note that if [`set_send_buffer_size`] has been called on this socket
+    /// previously, the value returned by this function may not be the same as
+    /// the argument provided to `set_send_buffer_size`. This is for the
+    /// following reasons:
+    ///
+    /// * Most operating systems have minimum and maximum allowed sizes for the
+    ///   send buffer, and will clamp the provided value if it is below the
+    ///   minimum or above the maximum. The minimum and maximum buffer sizes are
+    ///   OS-dependent.
+    /// * Linux will double the buffer size to account for internal bookkeeping
+    ///   data, and returns the doubled value from `getsockopt(2)`. As per `man
+    ///   7 socket`:
+    ///   > Sets or gets the maximum socket send buffer in bytes. The
+    ///   > kernel doubles this value (to allow space for bookkeeping
+    ///   > overhead) when it is set using `setsockopt(2)`, and this doubled
+    ///   > value is returned by `getsockopt(2)`.
+    ///
+    /// [`set_send_buffer_size`]: #method.set_send_buffer_size
+    pub fn send_buffer_size(&self) -> io::Result<u32> {
+        self.inner.send_buffer_size().map(|n| n as u32)
+    }
+
+    /// Sets the size of the TCP receive buffer on this socket.
+    ///
+    /// On most operating systems, this sets the `SO_RCVBUF` socket option.
+    pub fn set_recv_buffer_size(&self, size: u32) -> io::Result<()> {
+        self.inner.set_recv_buffer_size(size as usize)
+    }
+
+    /// Returns the size of the TCP receive buffer for this socket.
+    ///
+    /// On most operating systems, this is the value of the `SO_RCVBUF` socket
+    /// option.
+    ///
+    /// Note that if [`set_recv_buffer_size`] has been called on this socket
+    /// previously, the value returned by this function may not be the same as
+    /// the argument provided to `set_send_buffer_size`. This is for the
+    /// following reasons:
+    ///
+    /// * Most operating systems have minimum and maximum allowed sizes for the
+    ///   receive buffer, and will clamp the provided value if it is below the
+    ///   minimum or above the maximum. The minimum and maximum buffer sizes are
+    ///   OS-dependent.
+    /// * Linux will double the buffer size to account for internal bookkeeping
+    ///   data, and returns the doubled value from `getsockopt(2)`. As per `man
+    ///   7 socket`:
+    ///   > Sets or gets the maximum socket send buffer in bytes. The
+    ///   > kernel doubles this value (to allow space for bookkeeping
+    ///   > overhead) when it is set using `setsockopt(2)`, and this doubled
+    ///   > value is returned by `getsockopt(2)`.
+    ///
+    /// [`set_recv_buffer_size`]: #method.set_recv_buffer_size
+    pub fn recv_buffer_size(&self) -> io::Result<u32> {
+        self.inner.recv_buffer_size().map(|n| n as u32)
+    }
+
+    /// Sets the linger duration of this socket by setting the SO_LINGER option.
+    ///
+    /// This option controls the action taken when a stream has unsent messages and the stream is
+    /// closed. If SO_LINGER is set, the system shall block the process until it can transmit the
+    /// data or until the time expires.
+    ///
+    /// If SO_LINGER is not specified, and the socket is closed, the system handles the call in a
+    /// way that allows the process to continue as quickly as possible.
+    pub fn set_linger(&self, dur: Option<Duration>) -> io::Result<()> {
+        self.inner.set_linger(dur)
+    }
+
+    /// Reads the linger duration for this socket by getting the `SO_LINGER`
+    /// option.
+    ///
+    /// For more information about this option, see [`set_linger`].
+    ///
+    /// [`set_linger`]: TcpSocket::set_linger
+    pub fn linger(&self) -> io::Result<Option<Duration>> {
+        self.inner.linger()
+    }
+
+    /// Gets the local address of this socket.
+    ///
+    /// Will fail on windows if called before `bind`.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     socket.bind(addr)?;
+    ///     assert_eq!(socket.local_addr().unwrap().to_string(), "127.0.0.1:8080");
+    ///     let listener = socket.listen(1024)?;
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn local_addr(&self) -> io::Result<SocketAddr> {
+        self.inner.local_addr().and_then(convert_address)
+    }
+
+    /// Binds the socket to the given address.
+    ///
+    /// This calls the `bind(2)` operating-system function. Behavior is
+    /// platform specific. Refer to the target platform's documentation for more
+    /// details.
+    ///
+    /// # Examples
+    ///
+    /// Bind a socket before listening.
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     socket.bind(addr)?;
+    ///
+    ///     let listener = socket.listen(1024)?;
+    /// # drop(listener);
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn bind(&self, addr: SocketAddr) -> io::Result<()> {
+        self.inner.bind(&addr.into())
+    }
+
+    /// Establishes a TCP connection with a peer at the specified socket address.
+    ///
+    /// The `TcpSocket` is consumed. Once the connection is established, a
+    /// connected [`TcpStream`] is returned. If the connection fails, the
+    /// encountered error is returned.
+    ///
+    /// [`TcpStream`]: TcpStream
+    ///
+    /// This calls the `connect(2)` operating-system function. Behavior is
+    /// platform specific. Refer to the target platform's documentation for more
+    /// details.
+    ///
+    /// # Examples
+    ///
+    /// Connecting to a peer.
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     let stream = socket.connect(addr).await?;
+    /// # drop(stream);
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    pub async fn connect(self, addr: SocketAddr) -> io::Result<TcpStream> {
+        if let Err(err) = self.inner.connect(&addr.into()) {
+            #[cfg(unix)]
+            if err.raw_os_error() != Some(libc::EINPROGRESS) {
+                return Err(err);
+            }
+            #[cfg(windows)]
+            if err.kind() != io::ErrorKind::WouldBlock {
+                return Err(err);
+            }
+        }
+        #[cfg(unix)]
+        let mio = {
+            use std::os::unix::io::{FromRawFd, IntoRawFd};
+
+            let raw_fd = self.inner.into_raw_fd();
+            unsafe { mio::net::TcpStream::from_raw_fd(raw_fd) }
+        };
+
+        #[cfg(windows)]
+        let mio = {
+            use std::os::windows::io::{FromRawSocket, IntoRawSocket};
+
+            let raw_socket = self.inner.into_raw_socket();
+            unsafe { mio::net::TcpStream::from_raw_socket(raw_socket) }
+        };
+
+        TcpStream::connect_mio(mio).await
+    }
+
+    /// Converts the socket into a `TcpListener`.
+    ///
+    /// `backlog` defines the maximum number of pending connections are queued
+    /// by the operating system at any given time. Connection are removed from
+    /// the queue with [`TcpListener::accept`]. When the queue is full, the
+    /// operating-system will start rejecting connections.
+    ///
+    /// [`TcpListener::accept`]: TcpListener::accept
+    ///
+    /// This calls the `listen(2)` operating-system function, marking the socket
+    /// as a passive socket. Behavior is platform specific. Refer to the target
+    /// platform's documentation for more details.
+    ///
+    /// # Examples
+    ///
+    /// Create a `TcpListener`.
+    ///
+    /// ```no_run
+    /// use tokio::net::TcpSocket;
+    ///
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     let addr = "127.0.0.1:8080".parse().unwrap();
+    ///
+    ///     let socket = TcpSocket::new_v4()?;
+    ///     socket.bind(addr)?;
+    ///
+    ///     let listener = socket.listen(1024)?;
+    /// # drop(listener);
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn listen(self, backlog: u32) -> io::Result<TcpListener> {
+        self.inner.listen(backlog as i32)?;
+        #[cfg(unix)]
+        let mio = {
+            use std::os::unix::io::{FromRawFd, IntoRawFd};
+
+            let raw_fd = self.inner.into_raw_fd();
+            unsafe { mio::net::TcpListener::from_raw_fd(raw_fd) }
+        };
+
+        #[cfg(windows)]
+        let mio = {
+            use std::os::windows::io::{FromRawSocket, IntoRawSocket};
+
+            let raw_socket = self.inner.into_raw_socket();
+            unsafe { mio::net::TcpListener::from_raw_socket(raw_socket) }
+        };
+
+        TcpListener::new(mio)
+    }
+
+    /// Converts a [`std::net::TcpStream`] into a `TcpSocket`. The provided
+    /// socket must not have been connected prior to calling this function. This
+    /// function is typically used together with crates such as [`socket2`] to
+    /// configure socket options that are not available on `TcpSocket`.
+    ///
+    /// [`std::net::TcpStream`]: struct@std::net::TcpStream
+    /// [`socket2`]: https://docs.rs/socket2/
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use tokio::net::TcpSocket;
+    /// use socket2::{Domain, Socket, Type};
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> std::io::Result<()> {
+    ///
+    ///     let socket2_socket = Socket::new(Domain::IPV4, Type::STREAM, None)?;
+    ///
+    ///     let socket = TcpSocket::from_std_stream(socket2_socket.into());
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn from_std_stream(std_stream: std::net::TcpStream) -> TcpSocket {
+        #[cfg(unix)]
+        {
+            use std::os::unix::io::{FromRawFd, IntoRawFd};
+
+            let raw_fd = std_stream.into_raw_fd();
+            unsafe { TcpSocket::from_raw_fd(raw_fd) }
+        }
+
+        #[cfg(windows)]
+        {
+            use std::os::windows::io::{FromRawSocket, IntoRawSocket};
+
+            let raw_socket = std_stream.into_raw_socket();
+            unsafe { TcpSocket::from_raw_socket(raw_socket) }
+        }
+    }
+}
+
+fn convert_address(address: socket2::SockAddr) -> io::Result<SocketAddr> {
+    match address.as_socket() {
+        Some(address) => Ok(address),
+        None => Err(io::Error::new(
+            io::ErrorKind::InvalidInput,
+            "invalid address family (not IPv4 or IPv6)",
+        )),
+    }
+}
+
+impl fmt::Debug for TcpSocket {
+    fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
+        self.inner.fmt(fmt)
+    }
+}
+
+#[cfg(unix)]
+impl AsRawFd for TcpSocket {
+    fn as_raw_fd(&self) -> RawFd {
+        self.inner.as_raw_fd()
+    }
+}
+
+#[cfg(unix)]
+impl FromRawFd for TcpSocket {
+    /// Converts a `RawFd` to a `TcpSocket`.
+    ///
+    /// # Notes
+    ///
+    /// The caller is responsible for ensuring that the socket is in
+    /// non-blocking mode.
+    unsafe fn from_raw_fd(fd: RawFd) -> TcpSocket {
+        let inner = socket2::Socket::from_raw_fd(fd);
+        TcpSocket { inner }
+    }
+}
+
+#[cfg(unix)]
+impl IntoRawFd for TcpSocket {
+    fn into_raw_fd(self) -> RawFd {
+        self.inner.into_raw_fd()
+    }
+}
+
+#[cfg(windows)]
+impl IntoRawSocket for TcpSocket {
+    fn into_raw_socket(self) -> RawSocket {
+        self.inner.into_raw_socket()
+    }
+}
+
+#[cfg(windows)]
+impl AsRawSocket for TcpSocket {
+    fn as_raw_socket(&self) -> RawSocket {
+        self.inner.as_raw_socket()
+    }
+}
+
+#[cfg(windows)]
+impl FromRawSocket for TcpSocket {
+    /// Converts a `RawSocket` to a `TcpStream`.
+    ///
+    /// # Notes
+    ///
+    /// The caller is responsible for ensuring that the socket is in
+    /// non-blocking mode.
+    unsafe fn from_raw_socket(socket: RawSocket) -> TcpSocket {
+        let inner = socket2::Socket::from_raw_socket(socket);
+        TcpSocket { inner }
+    }
+}