diff options
Diffstat (limited to 'media/libopus/include')
| -rw-r--r-- | media/libopus/include/opus.h | 981 | ||||
| -rw-r--r-- | media/libopus/include/opus_custom.h | 343 | ||||
| -rw-r--r-- | media/libopus/include/opus_defines.h | 801 | ||||
| -rw-r--r-- | media/libopus/include/opus_multistream.h | 660 | ||||
| -rw-r--r-- | media/libopus/include/opus_projection.h | 568 | ||||
| -rw-r--r-- | media/libopus/include/opus_types.h | 166 |
6 files changed, 3519 insertions, 0 deletions
diff --git a/media/libopus/include/opus.h b/media/libopus/include/opus.h new file mode 100644 index 0000000000..0c69c627d9 --- /dev/null +++ b/media/libopus/include/opus.h @@ -0,0 +1,981 @@ +/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited + Written by Jean-Marc Valin and Koen Vos */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + * @file opus.h + * @brief Opus reference implementation API + */ + +#ifndef OPUS_H +#define OPUS_H + +#include "opus_types.h" +#include "opus_defines.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @mainpage Opus + * + * The Opus codec is designed for interactive speech and audio transmission over the Internet. + * It is designed by the IETF Codec Working Group and incorporates technology from + * Skype's SILK codec and Xiph.Org's CELT codec. + * + * The Opus codec is designed to handle a wide range of interactive audio applications, + * including Voice over IP, videoconferencing, in-game chat, and even remote live music + * performances. It can scale from low bit-rate narrowband speech to very high quality + * stereo music. Its main features are: + + * @li Sampling rates from 8 to 48 kHz + * @li Bit-rates from 6 kb/s to 510 kb/s + * @li Support for both constant bit-rate (CBR) and variable bit-rate (VBR) + * @li Audio bandwidth from narrowband to full-band + * @li Support for speech and music + * @li Support for mono and stereo + * @li Support for multichannel (up to 255 channels) + * @li Frame sizes from 2.5 ms to 60 ms + * @li Good loss robustness and packet loss concealment (PLC) + * @li Floating point and fixed-point implementation + * + * Documentation sections: + * @li @ref opus_encoder + * @li @ref opus_decoder + * @li @ref opus_repacketizer + * @li @ref opus_multistream + * @li @ref opus_libinfo + * @li @ref opus_custom + */ + +/** @defgroup opus_encoder Opus Encoder + * @{ + * + * @brief This page describes the process and functions used to encode Opus. + * + * Since Opus is a stateful codec, the encoding process starts with creating an encoder + * state. This can be done with: + * + * @code + * int error; + * OpusEncoder *enc; + * enc = opus_encoder_create(Fs, channels, application, &error); + * @endcode + * + * From this point, @c enc can be used for encoding an audio stream. An encoder state + * @b must @b not be used for more than one stream at the same time. Similarly, the encoder + * state @b must @b not be re-initialized for each frame. + * + * While opus_encoder_create() allocates memory for the state, it's also possible + * to initialize pre-allocated memory: + * + * @code + * int size; + * int error; + * OpusEncoder *enc; + * size = opus_encoder_get_size(channels); + * enc = malloc(size); + * error = opus_encoder_init(enc, Fs, channels, application); + * @endcode + * + * where opus_encoder_get_size() returns the required size for the encoder state. Note that + * future versions of this code may change the size, so no assuptions should be made about it. + * + * The encoder state is always continuous in memory and only a shallow copy is sufficient + * to copy it (e.g. memcpy()) + * + * It is possible to change some of the encoder's settings using the opus_encoder_ctl() + * interface. All these settings already default to the recommended value, so they should + * only be changed when necessary. The most common settings one may want to change are: + * + * @code + * opus_encoder_ctl(enc, OPUS_SET_BITRATE(bitrate)); + * opus_encoder_ctl(enc, OPUS_SET_COMPLEXITY(complexity)); + * opus_encoder_ctl(enc, OPUS_SET_SIGNAL(signal_type)); + * @endcode + * + * where + * + * @arg bitrate is in bits per second (b/s) + * @arg complexity is a value from 1 to 10, where 1 is the lowest complexity and 10 is the highest + * @arg signal_type is either OPUS_AUTO (default), OPUS_SIGNAL_VOICE, or OPUS_SIGNAL_MUSIC + * + * See @ref opus_encoderctls and @ref opus_genericctls for a complete list of parameters that can be set or queried. Most parameters can be set or changed at any time during a stream. + * + * To encode a frame, opus_encode() or opus_encode_float() must be called with exactly one frame (2.5, 5, 10, 20, 40 or 60 ms) of audio data: + * @code + * len = opus_encode(enc, audio_frame, frame_size, packet, max_packet); + * @endcode + * + * where + * <ul> + * <li>audio_frame is the audio data in opus_int16 (or float for opus_encode_float())</li> + * <li>frame_size is the duration of the frame in samples (per channel)</li> + * <li>packet is the byte array to which the compressed data is written</li> + * <li>max_packet is the maximum number of bytes that can be written in the packet (4000 bytes is recommended). + * Do not use max_packet to control VBR target bitrate, instead use the #OPUS_SET_BITRATE CTL.</li> + * </ul> + * + * opus_encode() and opus_encode_float() return the number of bytes actually written to the packet. + * The return value <b>can be negative</b>, which indicates that an error has occurred. If the return value + * is 2 bytes or less, then the packet does not need to be transmitted (DTX). + * + * Once the encoder state if no longer needed, it can be destroyed with + * + * @code + * opus_encoder_destroy(enc); + * @endcode + * + * If the encoder was created with opus_encoder_init() rather than opus_encoder_create(), + * then no action is required aside from potentially freeing the memory that was manually + * allocated for it (calling free(enc) for the example above) + * + */ + +/** Opus encoder state. + * This contains the complete state of an Opus encoder. + * It is position independent and can be freely copied. + * @see opus_encoder_create,opus_encoder_init + */ +typedef struct OpusEncoder OpusEncoder; + +/** Gets the size of an <code>OpusEncoder</code> structure. + * @param[in] channels <tt>int</tt>: Number of channels. + * This must be 1 or 2. + * @returns The size in bytes. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_encoder_get_size(int channels); + +/** + */ + +/** Allocates and initializes an encoder state. + * There are three coding modes: + * + * @ref OPUS_APPLICATION_VOIP gives best quality at a given bitrate for voice + * signals. It enhances the input signal by high-pass filtering and + * emphasizing formants and harmonics. Optionally it includes in-band + * forward error correction to protect against packet loss. Use this + * mode for typical VoIP applications. Because of the enhancement, + * even at high bitrates the output may sound different from the input. + * + * @ref OPUS_APPLICATION_AUDIO gives best quality at a given bitrate for most + * non-voice signals like music. Use this mode for music and mixed + * (music/voice) content, broadcast, and applications requiring less + * than 15 ms of coding delay. + * + * @ref OPUS_APPLICATION_RESTRICTED_LOWDELAY configures low-delay mode that + * disables the speech-optimized mode in exchange for slightly reduced delay. + * This mode can only be set on an newly initialized or freshly reset encoder + * because it changes the codec delay. + * + * This is useful when the caller knows that the speech-optimized modes will not be needed (use with caution). + * @param [in] Fs <tt>opus_int32</tt>: Sampling rate of input signal (Hz) + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) in input signal + * @param [in] application <tt>int</tt>: Coding mode (one of @ref OPUS_APPLICATION_VOIP, @ref OPUS_APPLICATION_AUDIO, or @ref OPUS_APPLICATION_RESTRICTED_LOWDELAY) + * @param [out] error <tt>int*</tt>: @ref opus_errorcodes + * @note Regardless of the sampling rate and number channels selected, the Opus encoder + * can switch to a lower audio bandwidth or number of channels if the bitrate + * selected is too low. This also means that it is safe to always use 48 kHz stereo input + * and let the encoder optimize the encoding. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusEncoder *opus_encoder_create( + opus_int32 Fs, + int channels, + int application, + int *error +); + +/** Initializes a previously allocated encoder state + * The memory pointed to by st must be at least the size returned by opus_encoder_get_size(). + * This is intended for applications which use their own allocator instead of malloc. + * @see opus_encoder_create(),opus_encoder_get_size() + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @param [in] st <tt>OpusEncoder*</tt>: Encoder state + * @param [in] Fs <tt>opus_int32</tt>: Sampling rate of input signal (Hz) + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) in input signal + * @param [in] application <tt>int</tt>: Coding mode (one of OPUS_APPLICATION_VOIP, OPUS_APPLICATION_AUDIO, or OPUS_APPLICATION_RESTRICTED_LOWDELAY) + * @retval #OPUS_OK Success or @ref opus_errorcodes + */ +OPUS_EXPORT int opus_encoder_init( + OpusEncoder *st, + opus_int32 Fs, + int channels, + int application +) OPUS_ARG_NONNULL(1); + +/** Encodes an Opus frame. + * @param [in] st <tt>OpusEncoder*</tt>: Encoder state + * @param [in] pcm <tt>opus_int16*</tt>: Input signal (interleaved if 2 channels). length is frame_size*channels*sizeof(opus_int16) + * @param [in] frame_size <tt>int</tt>: Number of samples per channel in the + * input signal. + * This must be an Opus frame size for + * the encoder's sampling rate. + * For example, at 48 kHz the permitted + * values are 120, 240, 480, 960, 1920, + * and 2880. + * Passing in a duration of less than + * 10 ms (480 samples at 48 kHz) will + * prevent the encoder from using the LPC + * or hybrid modes. + * @param [out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_encode( + OpusEncoder *st, + const opus_int16 *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Encodes an Opus frame from floating point input. + * @param [in] st <tt>OpusEncoder*</tt>: Encoder state + * @param [in] pcm <tt>float*</tt>: Input in float format (interleaved if 2 channels), with a normal range of +/-1.0. + * Samples with a range beyond +/-1.0 are supported but will + * be clipped by decoders using the integer API and should + * only be used if it is known that the far end supports + * extended dynamic range. + * length is frame_size*channels*sizeof(float) + * @param [in] frame_size <tt>int</tt>: Number of samples per channel in the + * input signal. + * This must be an Opus frame size for + * the encoder's sampling rate. + * For example, at 48 kHz the permitted + * values are 120, 240, 480, 960, 1920, + * and 2880. + * Passing in a duration of less than + * 10 ms (480 samples at 48 kHz) will + * prevent the encoder from using the LPC + * or hybrid modes. + * @param [out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_encode_float( + OpusEncoder *st, + const float *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Frees an <code>OpusEncoder</code> allocated by opus_encoder_create(). + * @param[in] st <tt>OpusEncoder*</tt>: State to be freed. + */ +OPUS_EXPORT void opus_encoder_destroy(OpusEncoder *st); + +/** Perform a CTL function on an Opus encoder. + * + * Generally the request and subsequent arguments are generated + * by a convenience macro. + * @param st <tt>OpusEncoder*</tt>: Encoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls or + * @ref opus_encoderctls. + * @see opus_genericctls + * @see opus_encoderctls + */ +OPUS_EXPORT int opus_encoder_ctl(OpusEncoder *st, int request, ...) OPUS_ARG_NONNULL(1); +/**@}*/ + +/** @defgroup opus_decoder Opus Decoder + * @{ + * + * @brief This page describes the process and functions used to decode Opus. + * + * The decoding process also starts with creating a decoder + * state. This can be done with: + * @code + * int error; + * OpusDecoder *dec; + * dec = opus_decoder_create(Fs, channels, &error); + * @endcode + * where + * @li Fs is the sampling rate and must be 8000, 12000, 16000, 24000, or 48000 + * @li channels is the number of channels (1 or 2) + * @li error will hold the error code in case of failure (or #OPUS_OK on success) + * @li the return value is a newly created decoder state to be used for decoding + * + * While opus_decoder_create() allocates memory for the state, it's also possible + * to initialize pre-allocated memory: + * @code + * int size; + * int error; + * OpusDecoder *dec; + * size = opus_decoder_get_size(channels); + * dec = malloc(size); + * error = opus_decoder_init(dec, Fs, channels); + * @endcode + * where opus_decoder_get_size() returns the required size for the decoder state. Note that + * future versions of this code may change the size, so no assuptions should be made about it. + * + * The decoder state is always continuous in memory and only a shallow copy is sufficient + * to copy it (e.g. memcpy()) + * + * To decode a frame, opus_decode() or opus_decode_float() must be called with a packet of compressed audio data: + * @code + * frame_size = opus_decode(dec, packet, len, decoded, max_size, 0); + * @endcode + * where + * + * @li packet is the byte array containing the compressed data + * @li len is the exact number of bytes contained in the packet + * @li decoded is the decoded audio data in opus_int16 (or float for opus_decode_float()) + * @li max_size is the max duration of the frame in samples (per channel) that can fit into the decoded_frame array + * + * opus_decode() and opus_decode_float() return the number of samples (per channel) decoded from the packet. + * If that value is negative, then an error has occurred. This can occur if the packet is corrupted or if the audio + * buffer is too small to hold the decoded audio. + * + * Opus is a stateful codec with overlapping blocks and as a result Opus + * packets are not coded independently of each other. Packets must be + * passed into the decoder serially and in the correct order for a correct + * decode. Lost packets can be replaced with loss concealment by calling + * the decoder with a null pointer and zero length for the missing packet. + * + * A single codec state may only be accessed from a single thread at + * a time and any required locking must be performed by the caller. Separate + * streams must be decoded with separate decoder states and can be decoded + * in parallel unless the library was compiled with NONTHREADSAFE_PSEUDOSTACK + * defined. + * + */ + +/** Opus decoder state. + * This contains the complete state of an Opus decoder. + * It is position independent and can be freely copied. + * @see opus_decoder_create,opus_decoder_init + */ +typedef struct OpusDecoder OpusDecoder; + +/** Gets the size of an <code>OpusDecoder</code> structure. + * @param [in] channels <tt>int</tt>: Number of channels. + * This must be 1 or 2. + * @returns The size in bytes. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decoder_get_size(int channels); + +/** Allocates and initializes a decoder state. + * @param [in] Fs <tt>opus_int32</tt>: Sample rate to decode at (Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) to decode + * @param [out] error <tt>int*</tt>: #OPUS_OK Success or @ref opus_errorcodes + * + * Internally Opus stores data at 48000 Hz, so that should be the default + * value for Fs. However, the decoder can efficiently decode to buffers + * at 8, 12, 16, and 24 kHz so if for some reason the caller cannot use + * data at the full sample rate, or knows the compressed data doesn't + * use the full frequency range, it can request decoding at a reduced + * rate. Likewise, the decoder is capable of filling in either mono or + * interleaved stereo pcm buffers, at the caller's request. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusDecoder *opus_decoder_create( + opus_int32 Fs, + int channels, + int *error +); + +/** Initializes a previously allocated decoder state. + * The state must be at least the size returned by opus_decoder_get_size(). + * This is intended for applications which use their own allocator instead of malloc. @see opus_decoder_create,opus_decoder_get_size + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @param [in] st <tt>OpusDecoder*</tt>: Decoder state. + * @param [in] Fs <tt>opus_int32</tt>: Sampling rate to decode to (Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) to decode + * @retval #OPUS_OK Success or @ref opus_errorcodes + */ +OPUS_EXPORT int opus_decoder_init( + OpusDecoder *st, + opus_int32 Fs, + int channels +) OPUS_ARG_NONNULL(1); + +/** Decode an Opus packet. + * @param [in] st <tt>OpusDecoder*</tt>: Decoder state + * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss + * @param [in] len <tt>opus_int32</tt>: Number of bytes in payload* + * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length + * is frame_size*channels*sizeof(opus_int16) + * @param [in] frame_size Number of samples per channel of available space in \a pcm. + * If this is less than the maximum packet duration (120ms; 5760 for 48kHz), this function will + * not be capable of decoding some packets. In the case of PLC (data==NULL) or FEC (decode_fec=1), + * then frame_size needs to be exactly the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the next incoming packet. For the PLC and + * FEC cases, frame_size <b>must</b> be a multiple of 2.5 ms. + * @param [in] decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band forward error correction data be + * decoded. If no such data is available, the frame is decoded as if it were lost. + * @returns Number of decoded samples or @ref opus_errorcodes + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decode( + OpusDecoder *st, + const unsigned char *data, + opus_int32 len, + opus_int16 *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Decode an Opus packet with floating point output. + * @param [in] st <tt>OpusDecoder*</tt>: Decoder state + * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss + * @param [in] len <tt>opus_int32</tt>: Number of bytes in payload + * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length + * is frame_size*channels*sizeof(float) + * @param [in] frame_size Number of samples per channel of available space in \a pcm. + * If this is less than the maximum packet duration (120ms; 5760 for 48kHz), this function will + * not be capable of decoding some packets. In the case of PLC (data==NULL) or FEC (decode_fec=1), + * then frame_size needs to be exactly the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the next incoming packet. For the PLC and + * FEC cases, frame_size <b>must</b> be a multiple of 2.5 ms. + * @param [in] decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band forward error correction data be + * decoded. If no such data is available the frame is decoded as if it were lost. + * @returns Number of decoded samples or @ref opus_errorcodes + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decode_float( + OpusDecoder *st, + const unsigned char *data, + opus_int32 len, + float *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Perform a CTL function on an Opus decoder. + * + * Generally the request and subsequent arguments are generated + * by a convenience macro. + * @param st <tt>OpusDecoder*</tt>: Decoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls or + * @ref opus_decoderctls. + * @see opus_genericctls + * @see opus_decoderctls + */ +OPUS_EXPORT int opus_decoder_ctl(OpusDecoder *st, int request, ...) OPUS_ARG_NONNULL(1); + +/** Frees an <code>OpusDecoder</code> allocated by opus_decoder_create(). + * @param[in] st <tt>OpusDecoder*</tt>: State to be freed. + */ +OPUS_EXPORT void opus_decoder_destroy(OpusDecoder *st); + +/** Parse an opus packet into one or more frames. + * Opus_decode will perform this operation internally so most applications do + * not need to use this function. + * This function does not copy the frames, the returned pointers are pointers into + * the input packet. + * @param [in] data <tt>char*</tt>: Opus packet to be parsed + * @param [in] len <tt>opus_int32</tt>: size of data + * @param [out] out_toc <tt>char*</tt>: TOC pointer + * @param [out] frames <tt>char*[48]</tt> encapsulated frames + * @param [out] size <tt>opus_int16[48]</tt> sizes of the encapsulated frames + * @param [out] payload_offset <tt>int*</tt>: returns the position of the payload within the packet (in bytes) + * @returns number of frames + */ +OPUS_EXPORT int opus_packet_parse( + const unsigned char *data, + opus_int32 len, + unsigned char *out_toc, + const unsigned char *frames[48], + opus_int16 size[48], + int *payload_offset +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5); + +/** Gets the bandwidth of an Opus packet. + * @param [in] data <tt>char*</tt>: Opus packet + * @retval OPUS_BANDWIDTH_NARROWBAND Narrowband (4kHz bandpass) + * @retval OPUS_BANDWIDTH_MEDIUMBAND Mediumband (6kHz bandpass) + * @retval OPUS_BANDWIDTH_WIDEBAND Wideband (8kHz bandpass) + * @retval OPUS_BANDWIDTH_SUPERWIDEBAND Superwideband (12kHz bandpass) + * @retval OPUS_BANDWIDTH_FULLBAND Fullband (20kHz bandpass) + * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_bandwidth(const unsigned char *data) OPUS_ARG_NONNULL(1); + +/** Gets the number of samples per frame from an Opus packet. + * @param [in] data <tt>char*</tt>: Opus packet. + * This must contain at least one byte of + * data. + * @param [in] Fs <tt>opus_int32</tt>: Sampling rate in Hz. + * This must be a multiple of 400, or + * inaccurate results will be returned. + * @returns Number of samples per frame. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_samples_per_frame(const unsigned char *data, opus_int32 Fs) OPUS_ARG_NONNULL(1); + +/** Gets the number of channels from an Opus packet. + * @param [in] data <tt>char*</tt>: Opus packet + * @returns Number of channels + * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_channels(const unsigned char *data) OPUS_ARG_NONNULL(1); + +/** Gets the number of frames in an Opus packet. + * @param [in] packet <tt>char*</tt>: Opus packet + * @param [in] len <tt>opus_int32</tt>: Length of packet + * @returns Number of frames + * @retval OPUS_BAD_ARG Insufficient data was passed to the function + * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_frames(const unsigned char packet[], opus_int32 len) OPUS_ARG_NONNULL(1); + +/** Gets the number of samples of an Opus packet. + * @param [in] packet <tt>char*</tt>: Opus packet + * @param [in] len <tt>opus_int32</tt>: Length of packet + * @param [in] Fs <tt>opus_int32</tt>: Sampling rate in Hz. + * This must be a multiple of 400, or + * inaccurate results will be returned. + * @returns Number of samples + * @retval OPUS_BAD_ARG Insufficient data was passed to the function + * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_samples(const unsigned char packet[], opus_int32 len, opus_int32 Fs) OPUS_ARG_NONNULL(1); + +/** Gets the number of samples of an Opus packet. + * @param [in] dec <tt>OpusDecoder*</tt>: Decoder state + * @param [in] packet <tt>char*</tt>: Opus packet + * @param [in] len <tt>opus_int32</tt>: Length of packet + * @returns Number of samples + * @retval OPUS_BAD_ARG Insufficient data was passed to the function + * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decoder_get_nb_samples(const OpusDecoder *dec, const unsigned char packet[], opus_int32 len) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); + +/** Applies soft-clipping to bring a float signal within the [-1,1] range. If + * the signal is already in that range, nothing is done. If there are values + * outside of [-1,1], then the signal is clipped as smoothly as possible to + * both fit in the range and avoid creating excessive distortion in the + * process. + * @param [in,out] pcm <tt>float*</tt>: Input PCM and modified PCM + * @param [in] frame_size <tt>int</tt> Number of samples per channel to process + * @param [in] channels <tt>int</tt>: Number of channels + * @param [in,out] softclip_mem <tt>float*</tt>: State memory for the soft clipping process (one float per channel, initialized to zero) + */ +OPUS_EXPORT void opus_pcm_soft_clip(float *pcm, int frame_size, int channels, float *softclip_mem); + + +/**@}*/ + +/** @defgroup opus_repacketizer Repacketizer + * @{ + * + * The repacketizer can be used to merge multiple Opus packets into a single + * packet or alternatively to split Opus packets that have previously been + * merged. Splitting valid Opus packets is always guaranteed to succeed, + * whereas merging valid packets only succeeds if all frames have the same + * mode, bandwidth, and frame size, and when the total duration of the merged + * packet is no more than 120 ms. The 120 ms limit comes from the + * specification and limits decoder memory requirements at a point where + * framing overhead becomes negligible. + * + * The repacketizer currently only operates on elementary Opus + * streams. It will not manipualte multistream packets successfully, except in + * the degenerate case where they consist of data from a single stream. + * + * The repacketizing process starts with creating a repacketizer state, either + * by calling opus_repacketizer_create() or by allocating the memory yourself, + * e.g., + * @code + * OpusRepacketizer *rp; + * rp = (OpusRepacketizer*)malloc(opus_repacketizer_get_size()); + * if (rp != NULL) + * opus_repacketizer_init(rp); + * @endcode + * + * Then the application should submit packets with opus_repacketizer_cat(), + * extract new packets with opus_repacketizer_out() or + * opus_repacketizer_out_range(), and then reset the state for the next set of + * input packets via opus_repacketizer_init(). + * + * For example, to split a sequence of packets into individual frames: + * @code + * unsigned char *data; + * int len; + * while (get_next_packet(&data, &len)) + * { + * unsigned char out[1276]; + * opus_int32 out_len; + * int nb_frames; + * int err; + * int i; + * err = opus_repacketizer_cat(rp, data, len); + * if (err != OPUS_OK) + * { + * release_packet(data); + * return err; + * } + * nb_frames = opus_repacketizer_get_nb_frames(rp); + * for (i = 0; i < nb_frames; i++) + * { + * out_len = opus_repacketizer_out_range(rp, i, i+1, out, sizeof(out)); + * if (out_len < 0) + * { + * release_packet(data); + * return (int)out_len; + * } + * output_next_packet(out, out_len); + * } + * opus_repacketizer_init(rp); + * release_packet(data); + * } + * @endcode + * + * Alternatively, to combine a sequence of frames into packets that each + * contain up to <code>TARGET_DURATION_MS</code> milliseconds of data: + * @code + * // The maximum number of packets with duration TARGET_DURATION_MS occurs + * // when the frame size is 2.5 ms, for a total of (TARGET_DURATION_MS*2/5) + * // packets. + * unsigned char *data[(TARGET_DURATION_MS*2/5)+1]; + * opus_int32 len[(TARGET_DURATION_MS*2/5)+1]; + * int nb_packets; + * unsigned char out[1277*(TARGET_DURATION_MS*2/2)]; + * opus_int32 out_len; + * int prev_toc; + * nb_packets = 0; + * while (get_next_packet(data+nb_packets, len+nb_packets)) + * { + * int nb_frames; + * int err; + * nb_frames = opus_packet_get_nb_frames(data[nb_packets], len[nb_packets]); + * if (nb_frames < 1) + * { + * release_packets(data, nb_packets+1); + * return nb_frames; + * } + * nb_frames += opus_repacketizer_get_nb_frames(rp); + * // If adding the next packet would exceed our target, or it has an + * // incompatible TOC sequence, output the packets we already have before + * // submitting it. + * // N.B., The nb_packets > 0 check ensures we've submitted at least one + * // packet since the last call to opus_repacketizer_init(). Otherwise a + * // single packet longer than TARGET_DURATION_MS would cause us to try to + * // output an (invalid) empty packet. It also ensures that prev_toc has + * // been set to a valid value. Additionally, len[nb_packets] > 0 is + * // guaranteed by the call to opus_packet_get_nb_frames() above, so the + * // reference to data[nb_packets][0] should be valid. + * if (nb_packets > 0 && ( + * ((prev_toc & 0xFC) != (data[nb_packets][0] & 0xFC)) || + * opus_packet_get_samples_per_frame(data[nb_packets], 48000)*nb_frames > + * TARGET_DURATION_MS*48)) + * { + * out_len = opus_repacketizer_out(rp, out, sizeof(out)); + * if (out_len < 0) + * { + * release_packets(data, nb_packets+1); + * return (int)out_len; + * } + * output_next_packet(out, out_len); + * opus_repacketizer_init(rp); + * release_packets(data, nb_packets); + * data[0] = data[nb_packets]; + * len[0] = len[nb_packets]; + * nb_packets = 0; + * } + * err = opus_repacketizer_cat(rp, data[nb_packets], len[nb_packets]); + * if (err != OPUS_OK) + * { + * release_packets(data, nb_packets+1); + * return err; + * } + * prev_toc = data[nb_packets][0]; + * nb_packets++; + * } + * // Output the final, partial packet. + * if (nb_packets > 0) + * { + * out_len = opus_repacketizer_out(rp, out, sizeof(out)); + * release_packets(data, nb_packets); + * if (out_len < 0) + * return (int)out_len; + * output_next_packet(out, out_len); + * } + * @endcode + * + * An alternate way of merging packets is to simply call opus_repacketizer_cat() + * unconditionally until it fails. At that point, the merged packet can be + * obtained with opus_repacketizer_out() and the input packet for which + * opus_repacketizer_cat() needs to be re-added to a newly reinitialized + * repacketizer state. + */ + +typedef struct OpusRepacketizer OpusRepacketizer; + +/** Gets the size of an <code>OpusRepacketizer</code> structure. + * @returns The size in bytes. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_repacketizer_get_size(void); + +/** (Re)initializes a previously allocated repacketizer state. + * The state must be at least the size returned by opus_repacketizer_get_size(). + * This can be used for applications which use their own allocator instead of + * malloc(). + * It must also be called to reset the queue of packets waiting to be + * repacketized, which is necessary if the maximum packet duration of 120 ms + * is reached or if you wish to submit packets with a different Opus + * configuration (coding mode, audio bandwidth, frame size, or channel count). + * Failure to do so will prevent a new packet from being added with + * opus_repacketizer_cat(). + * @see opus_repacketizer_create + * @see opus_repacketizer_get_size + * @see opus_repacketizer_cat + * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state to + * (re)initialize. + * @returns A pointer to the same repacketizer state that was passed in. + */ +OPUS_EXPORT OpusRepacketizer *opus_repacketizer_init(OpusRepacketizer *rp) OPUS_ARG_NONNULL(1); + +/** Allocates memory and initializes the new repacketizer with + * opus_repacketizer_init(). + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusRepacketizer *opus_repacketizer_create(void); + +/** Frees an <code>OpusRepacketizer</code> allocated by + * opus_repacketizer_create(). + * @param[in] rp <tt>OpusRepacketizer*</tt>: State to be freed. + */ +OPUS_EXPORT void opus_repacketizer_destroy(OpusRepacketizer *rp); + +/** Add a packet to the current repacketizer state. + * This packet must match the configuration of any packets already submitted + * for repacketization since the last call to opus_repacketizer_init(). + * This means that it must have the same coding mode, audio bandwidth, frame + * size, and channel count. + * This can be checked in advance by examining the top 6 bits of the first + * byte of the packet, and ensuring they match the top 6 bits of the first + * byte of any previously submitted packet. + * The total duration of audio in the repacketizer state also must not exceed + * 120 ms, the maximum duration of a single packet, after adding this packet. + * + * The contents of the current repacketizer state can be extracted into new + * packets using opus_repacketizer_out() or opus_repacketizer_out_range(). + * + * In order to add a packet with a different configuration or to add more + * audio beyond 120 ms, you must clear the repacketizer state by calling + * opus_repacketizer_init(). + * If a packet is too large to add to the current repacketizer state, no part + * of it is added, even if it contains multiple frames, some of which might + * fit. + * If you wish to be able to add parts of such packets, you should first use + * another repacketizer to split the packet into pieces and add them + * individually. + * @see opus_repacketizer_out_range + * @see opus_repacketizer_out + * @see opus_repacketizer_init + * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state to which to + * add the packet. + * @param[in] data <tt>const unsigned char*</tt>: The packet data. + * The application must ensure + * this pointer remains valid + * until the next call to + * opus_repacketizer_init() or + * opus_repacketizer_destroy(). + * @param len <tt>opus_int32</tt>: The number of bytes in the packet data. + * @returns An error code indicating whether or not the operation succeeded. + * @retval #OPUS_OK The packet's contents have been added to the repacketizer + * state. + * @retval #OPUS_INVALID_PACKET The packet did not have a valid TOC sequence, + * the packet's TOC sequence was not compatible + * with previously submitted packets (because + * the coding mode, audio bandwidth, frame size, + * or channel count did not match), or adding + * this packet would increase the total amount of + * audio stored in the repacketizer state to more + * than 120 ms. + */ +OPUS_EXPORT int opus_repacketizer_cat(OpusRepacketizer *rp, const unsigned char *data, opus_int32 len) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); + + +/** Construct a new packet from data previously submitted to the repacketizer + * state via opus_repacketizer_cat(). + * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state from which to + * construct the new packet. + * @param begin <tt>int</tt>: The index of the first frame in the current + * repacketizer state to include in the output. + * @param end <tt>int</tt>: One past the index of the last frame in the + * current repacketizer state to include in the + * output. + * @param[out] data <tt>const unsigned char*</tt>: The buffer in which to + * store the output packet. + * @param maxlen <tt>opus_int32</tt>: The maximum number of bytes to store in + * the output buffer. In order to guarantee + * success, this should be at least + * <code>1276</code> for a single frame, + * or for multiple frames, + * <code>1277*(end-begin)</code>. + * However, <code>1*(end-begin)</code> plus + * the size of all packet data submitted to + * the repacketizer since the last call to + * opus_repacketizer_init() or + * opus_repacketizer_create() is also + * sufficient, and possibly much smaller. + * @returns The total size of the output packet on success, or an error code + * on failure. + * @retval #OPUS_BAD_ARG <code>[begin,end)</code> was an invalid range of + * frames (begin < 0, begin >= end, or end > + * opus_repacketizer_get_nb_frames()). + * @retval #OPUS_BUFFER_TOO_SMALL \a maxlen was insufficient to contain the + * complete output packet. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_repacketizer_out_range(OpusRepacketizer *rp, int begin, int end, unsigned char *data, opus_int32 maxlen) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Return the total number of frames contained in packet data submitted to + * the repacketizer state so far via opus_repacketizer_cat() since the last + * call to opus_repacketizer_init() or opus_repacketizer_create(). + * This defines the valid range of packets that can be extracted with + * opus_repacketizer_out_range() or opus_repacketizer_out(). + * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state containing the + * frames. + * @returns The total number of frames contained in the packet data submitted + * to the repacketizer state. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_repacketizer_get_nb_frames(OpusRepacketizer *rp) OPUS_ARG_NONNULL(1); + +/** Construct a new packet from data previously submitted to the repacketizer + * state via opus_repacketizer_cat(). + * This is a convenience routine that returns all the data submitted so far + * in a single packet. + * It is equivalent to calling + * @code + * opus_repacketizer_out_range(rp, 0, opus_repacketizer_get_nb_frames(rp), + * data, maxlen) + * @endcode + * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state from which to + * construct the new packet. + * @param[out] data <tt>const unsigned char*</tt>: The buffer in which to + * store the output packet. + * @param maxlen <tt>opus_int32</tt>: The maximum number of bytes to store in + * the output buffer. In order to guarantee + * success, this should be at least + * <code>1277*opus_repacketizer_get_nb_frames(rp)</code>. + * However, + * <code>1*opus_repacketizer_get_nb_frames(rp)</code> + * plus the size of all packet data + * submitted to the repacketizer since the + * last call to opus_repacketizer_init() or + * opus_repacketizer_create() is also + * sufficient, and possibly much smaller. + * @returns The total size of the output packet on success, or an error code + * on failure. + * @retval #OPUS_BUFFER_TOO_SMALL \a maxlen was insufficient to contain the + * complete output packet. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_repacketizer_out(OpusRepacketizer *rp, unsigned char *data, opus_int32 maxlen) OPUS_ARG_NONNULL(1); + +/** Pads a given Opus packet to a larger size (possibly changing the TOC sequence). + * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the + * packet to pad. + * @param len <tt>opus_int32</tt>: The size of the packet. + * This must be at least 1. + * @param new_len <tt>opus_int32</tt>: The desired size of the packet after padding. + * This must be at least as large as len. + * @returns an error code + * @retval #OPUS_OK \a on success. + * @retval #OPUS_BAD_ARG \a len was less than 1 or new_len was less than len. + * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet. + */ +OPUS_EXPORT int opus_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len); + +/** Remove all padding from a given Opus packet and rewrite the TOC sequence to + * minimize space usage. + * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the + * packet to strip. + * @param len <tt>opus_int32</tt>: The size of the packet. + * This must be at least 1. + * @returns The new size of the output packet on success, or an error code + * on failure. + * @retval #OPUS_BAD_ARG \a len was less than 1. + * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_packet_unpad(unsigned char *data, opus_int32 len); + +/** Pads a given Opus multi-stream packet to a larger size (possibly changing the TOC sequence). + * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the + * packet to pad. + * @param len <tt>opus_int32</tt>: The size of the packet. + * This must be at least 1. + * @param new_len <tt>opus_int32</tt>: The desired size of the packet after padding. + * This must be at least 1. + * @param nb_streams <tt>opus_int32</tt>: The number of streams (not channels) in the packet. + * This must be at least as large as len. + * @returns an error code + * @retval #OPUS_OK \a on success. + * @retval #OPUS_BAD_ARG \a len was less than 1. + * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet. + */ +OPUS_EXPORT int opus_multistream_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len, int nb_streams); + +/** Remove all padding from a given Opus multi-stream packet and rewrite the TOC sequence to + * minimize space usage. + * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the + * packet to strip. + * @param len <tt>opus_int32</tt>: The size of the packet. + * This must be at least 1. + * @param nb_streams <tt>opus_int32</tt>: The number of streams (not channels) in the packet. + * This must be at least 1. + * @returns The new size of the output packet on success, or an error code + * on failure. + * @retval #OPUS_BAD_ARG \a len was less than 1 or new_len was less than len. + * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_packet_unpad(unsigned char *data, opus_int32 len, int nb_streams); + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_H */ diff --git a/media/libopus/include/opus_custom.h b/media/libopus/include/opus_custom.h new file mode 100644 index 0000000000..2f22d4b35a --- /dev/null +++ b/media/libopus/include/opus_custom.h @@ -0,0 +1,343 @@ +/* Copyright (c) 2007-2008 CSIRO + Copyright (c) 2007-2009 Xiph.Org Foundation + Copyright (c) 2008-2012 Gregory Maxwell + Written by Jean-Marc Valin and Gregory Maxwell */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + @file opus_custom.h + @brief Opus-Custom reference implementation API + */ + +#ifndef OPUS_CUSTOM_H +#define OPUS_CUSTOM_H + +#include "opus_defines.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef CUSTOM_MODES +# define OPUS_CUSTOM_EXPORT OPUS_EXPORT +# define OPUS_CUSTOM_EXPORT_STATIC OPUS_EXPORT +#else +# define OPUS_CUSTOM_EXPORT +# ifdef OPUS_BUILD +# define OPUS_CUSTOM_EXPORT_STATIC static OPUS_INLINE +# else +# define OPUS_CUSTOM_EXPORT_STATIC +# endif +#endif + +/** @defgroup opus_custom Opus Custom + * @{ + * Opus Custom is an optional part of the Opus specification and + * reference implementation which uses a distinct API from the regular + * API and supports frame sizes that are not normally supported.\ Use + * of Opus Custom is discouraged for all but very special applications + * for which a frame size different from 2.5, 5, 10, or 20 ms is needed + * (for either complexity or latency reasons) and where interoperability + * is less important. + * + * In addition to the interoperability limitations the use of Opus custom + * disables a substantial chunk of the codec and generally lowers the + * quality available at a given bitrate. Normally when an application needs + * a different frame size from the codec it should buffer to match the + * sizes but this adds a small amount of delay which may be important + * in some very low latency applications. Some transports (especially + * constant rate RF transports) may also work best with frames of + * particular durations. + * + * Libopus only supports custom modes if they are enabled at compile time. + * + * The Opus Custom API is similar to the regular API but the + * @ref opus_encoder_create and @ref opus_decoder_create calls take + * an additional mode parameter which is a structure produced by + * a call to @ref opus_custom_mode_create. Both the encoder and decoder + * must create a mode using the same sample rate (fs) and frame size + * (frame size) so these parameters must either be signaled out of band + * or fixed in a particular implementation. + * + * Similar to regular Opus the custom modes support on the fly frame size + * switching, but the sizes available depend on the particular frame size in + * use. For some initial frame sizes on a single on the fly size is available. + */ + +/** Contains the state of an encoder. One encoder state is needed + for each stream. It is initialized once at the beginning of the + stream. Do *not* re-initialize the state for every frame. + @brief Encoder state + */ +typedef struct OpusCustomEncoder OpusCustomEncoder; + +/** State of the decoder. One decoder state is needed for each stream. + It is initialized once at the beginning of the stream. Do *not* + re-initialize the state for every frame. + @brief Decoder state + */ +typedef struct OpusCustomDecoder OpusCustomDecoder; + +/** The mode contains all the information necessary to create an + encoder. Both the encoder and decoder need to be initialized + with exactly the same mode, otherwise the output will be + corrupted. The mode MUST NOT BE DESTROYED until the encoders and + decoders that use it are destroyed as well. + @brief Mode configuration + */ +typedef struct OpusCustomMode OpusCustomMode; + +/** Creates a new mode struct. This will be passed to an encoder or + * decoder. The mode MUST NOT BE DESTROYED until the encoders and + * decoders that use it are destroyed as well. + * @param [in] Fs <tt>int</tt>: Sampling rate (8000 to 96000 Hz) + * @param [in] frame_size <tt>int</tt>: Number of samples (per channel) to encode in each + * packet (64 - 1024, prime factorization must contain zero or more 2s, 3s, or 5s and no other primes) + * @param [out] error <tt>int*</tt>: Returned error code (if NULL, no error will be returned) + * @return A newly created mode + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomMode *opus_custom_mode_create(opus_int32 Fs, int frame_size, int *error); + +/** Destroys a mode struct. Only call this after all encoders and + * decoders using this mode are destroyed as well. + * @param [in] mode <tt>OpusCustomMode*</tt>: Mode to be freed. + */ +OPUS_CUSTOM_EXPORT void opus_custom_mode_destroy(OpusCustomMode *mode); + + +#if !defined(OPUS_BUILD) || defined(CELT_ENCODER_C) + +/* Encoder */ +/** Gets the size of an OpusCustomEncoder structure. + * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration + * @param [in] channels <tt>int</tt>: Number of channels + * @returns size + */ +OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_encoder_get_size( + const OpusCustomMode *mode, + int channels +) OPUS_ARG_NONNULL(1); + +# ifdef CUSTOM_MODES +/** Initializes a previously allocated encoder state + * The memory pointed to by st must be the size returned by opus_custom_encoder_get_size. + * This is intended for applications which use their own allocator instead of malloc. + * @see opus_custom_encoder_create(),opus_custom_encoder_get_size() + * To reset a previously initialized state use the OPUS_RESET_STATE CTL. + * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state + * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of + * the stream (must be the same characteristics as used for the + * decoder) + * @param [in] channels <tt>int</tt>: Number of channels + * @return OPUS_OK Success or @ref opus_errorcodes + */ +OPUS_CUSTOM_EXPORT int opus_custom_encoder_init( + OpusCustomEncoder *st, + const OpusCustomMode *mode, + int channels +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); +# endif +#endif + + +/** Creates a new encoder state. Each stream needs its own encoder + * state (can't be shared across simultaneous streams). + * @param [in] mode <tt>OpusCustomMode*</tt>: Contains all the information about the characteristics of + * the stream (must be the same characteristics as used for the + * decoder) + * @param [in] channels <tt>int</tt>: Number of channels + * @param [out] error <tt>int*</tt>: Returns an error code + * @return Newly created encoder state. +*/ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomEncoder *opus_custom_encoder_create( + const OpusCustomMode *mode, + int channels, + int *error +) OPUS_ARG_NONNULL(1); + + +/** Destroys an encoder state. + * @param[in] st <tt>OpusCustomEncoder*</tt>: State to be freed. + */ +OPUS_CUSTOM_EXPORT void opus_custom_encoder_destroy(OpusCustomEncoder *st); + +/** Encodes a frame of audio. + * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state + * @param [in] pcm <tt>float*</tt>: PCM audio in float format, with a normal range of +/-1.0. + * Samples with a range beyond +/-1.0 are supported but will + * be clipped by decoders using the integer API and should + * only be used if it is known that the far end supports + * extended dynamic range. There must be exactly + * frame_size samples per channel. + * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal + * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. + * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame + * (can change from one frame to another) + * @return Number of bytes written to "compressed". + * If negative, an error has occurred (see error codes). It is IMPORTANT that + * the length returned be somehow transmitted to the decoder. Otherwise, no + * decoding is possible. + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode_float( + OpusCustomEncoder *st, + const float *pcm, + int frame_size, + unsigned char *compressed, + int maxCompressedBytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Encodes a frame of audio. + * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state + * @param [in] pcm <tt>opus_int16*</tt>: PCM audio in signed 16-bit format (native endian). + * There must be exactly frame_size samples per channel. + * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal + * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. + * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame + * (can change from one frame to another) + * @return Number of bytes written to "compressed". + * If negative, an error has occurred (see error codes). It is IMPORTANT that + * the length returned be somehow transmitted to the decoder. Otherwise, no + * decoding is possible. + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode( + OpusCustomEncoder *st, + const opus_int16 *pcm, + int frame_size, + unsigned char *compressed, + int maxCompressedBytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Perform a CTL function on an Opus custom encoder. + * + * Generally the request and subsequent arguments are generated + * by a convenience macro. + * @see opus_encoderctls + */ +OPUS_CUSTOM_EXPORT int opus_custom_encoder_ctl(OpusCustomEncoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); + + +#if !defined(OPUS_BUILD) || defined(CELT_DECODER_C) +/* Decoder */ + +/** Gets the size of an OpusCustomDecoder structure. + * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration + * @param [in] channels <tt>int</tt>: Number of channels + * @returns size + */ +OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_decoder_get_size( + const OpusCustomMode *mode, + int channels +) OPUS_ARG_NONNULL(1); + +/** Initializes a previously allocated decoder state + * The memory pointed to by st must be the size returned by opus_custom_decoder_get_size. + * This is intended for applications which use their own allocator instead of malloc. + * @see opus_custom_decoder_create(),opus_custom_decoder_get_size() + * To reset a previously initialized state use the OPUS_RESET_STATE CTL. + * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state + * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of + * the stream (must be the same characteristics as used for the + * encoder) + * @param [in] channels <tt>int</tt>: Number of channels + * @return OPUS_OK Success or @ref opus_errorcodes + */ +OPUS_CUSTOM_EXPORT_STATIC int opus_custom_decoder_init( + OpusCustomDecoder *st, + const OpusCustomMode *mode, + int channels +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); + +#endif + + +/** Creates a new decoder state. Each stream needs its own decoder state (can't + * be shared across simultaneous streams). + * @param [in] mode <tt>OpusCustomMode</tt>: Contains all the information about the characteristics of the + * stream (must be the same characteristics as used for the encoder) + * @param [in] channels <tt>int</tt>: Number of channels + * @param [out] error <tt>int*</tt>: Returns an error code + * @return Newly created decoder state. + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomDecoder *opus_custom_decoder_create( + const OpusCustomMode *mode, + int channels, + int *error +) OPUS_ARG_NONNULL(1); + +/** Destroys a decoder state. + * @param[in] st <tt>OpusCustomDecoder*</tt>: State to be freed. + */ +OPUS_CUSTOM_EXPORT void opus_custom_decoder_destroy(OpusCustomDecoder *st); + +/** Decode an opus custom frame with floating point output + * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state + * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss + * @param [in] len <tt>int</tt>: Number of bytes in payload + * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length + * is frame_size*channels*sizeof(float) + * @param [in] frame_size Number of samples per channel of available space in *pcm. + * @returns Number of decoded samples or @ref opus_errorcodes + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode_float( + OpusCustomDecoder *st, + const unsigned char *data, + int len, + float *pcm, + int frame_size +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Decode an opus custom frame + * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state + * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss + * @param [in] len <tt>int</tt>: Number of bytes in payload + * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length + * is frame_size*channels*sizeof(opus_int16) + * @param [in] frame_size Number of samples per channel of available space in *pcm. + * @returns Number of decoded samples or @ref opus_errorcodes + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode( + OpusCustomDecoder *st, + const unsigned char *data, + int len, + opus_int16 *pcm, + int frame_size +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Perform a CTL function on an Opus custom decoder. + * + * Generally the request and subsequent arguments are generated + * by a convenience macro. + * @see opus_genericctls + */ +OPUS_CUSTOM_EXPORT int opus_custom_decoder_ctl(OpusCustomDecoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_CUSTOM_H */ diff --git a/media/libopus/include/opus_defines.h b/media/libopus/include/opus_defines.h new file mode 100644 index 0000000000..94b9e0d9fc --- /dev/null +++ b/media/libopus/include/opus_defines.h @@ -0,0 +1,801 @@ +/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited + Written by Jean-Marc Valin and Koen Vos */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + * @file opus_defines.h + * @brief Opus reference implementation constants + */ + +#ifndef OPUS_DEFINES_H +#define OPUS_DEFINES_H + +#include "opus_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @defgroup opus_errorcodes Error codes + * @{ + */ +/** No error @hideinitializer*/ +#define OPUS_OK 0 +/** One or more invalid/out of range arguments @hideinitializer*/ +#define OPUS_BAD_ARG -1 +/** Not enough bytes allocated in the buffer @hideinitializer*/ +#define OPUS_BUFFER_TOO_SMALL -2 +/** An internal error was detected @hideinitializer*/ +#define OPUS_INTERNAL_ERROR -3 +/** The compressed data passed is corrupted @hideinitializer*/ +#define OPUS_INVALID_PACKET -4 +/** Invalid/unsupported request number @hideinitializer*/ +#define OPUS_UNIMPLEMENTED -5 +/** An encoder or decoder structure is invalid or already freed @hideinitializer*/ +#define OPUS_INVALID_STATE -6 +/** Memory allocation has failed @hideinitializer*/ +#define OPUS_ALLOC_FAIL -7 +/**@}*/ + +/** @cond OPUS_INTERNAL_DOC */ +/**Export control for opus functions */ + +#ifndef OPUS_EXPORT +# if defined(_WIN32) +# if defined(OPUS_BUILD) && defined(DLL_EXPORT) +# define OPUS_EXPORT __declspec(dllexport) +# else +# define OPUS_EXPORT +# endif +# elif defined(__GNUC__) && defined(OPUS_BUILD) +# define OPUS_EXPORT __attribute__ ((visibility ("default"))) +# else +# define OPUS_EXPORT +# endif +#endif + +# if !defined(OPUS_GNUC_PREREQ) +# if defined(__GNUC__)&&defined(__GNUC_MINOR__) +# define OPUS_GNUC_PREREQ(_maj,_min) \ + ((__GNUC__<<16)+__GNUC_MINOR__>=((_maj)<<16)+(_min)) +# else +# define OPUS_GNUC_PREREQ(_maj,_min) 0 +# endif +# endif + +#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) ) +# if OPUS_GNUC_PREREQ(3,0) +# define OPUS_RESTRICT __restrict__ +# elif (defined(_MSC_VER) && _MSC_VER >= 1400) +# define OPUS_RESTRICT __restrict +# else +# define OPUS_RESTRICT +# endif +#else +# define OPUS_RESTRICT restrict +#endif + +#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) ) +# if OPUS_GNUC_PREREQ(2,7) +# define OPUS_INLINE __inline__ +# elif (defined(_MSC_VER)) +# define OPUS_INLINE __inline +# else +# define OPUS_INLINE +# endif +#else +# define OPUS_INLINE inline +#endif + +/**Warning attributes for opus functions + * NONNULL is not used in OPUS_BUILD to avoid the compiler optimizing out + * some paranoid null checks. */ +#if defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4) +# define OPUS_WARN_UNUSED_RESULT __attribute__ ((__warn_unused_result__)) +#else +# define OPUS_WARN_UNUSED_RESULT +#endif +#if !defined(OPUS_BUILD) && defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4) +# define OPUS_ARG_NONNULL(_x) __attribute__ ((__nonnull__(_x))) +#else +# define OPUS_ARG_NONNULL(_x) +#endif + +/** These are the actual Encoder CTL ID numbers. + * They should not be used directly by applications. + * In general, SETs should be even and GETs should be odd.*/ +#define OPUS_SET_APPLICATION_REQUEST 4000 +#define OPUS_GET_APPLICATION_REQUEST 4001 +#define OPUS_SET_BITRATE_REQUEST 4002 +#define OPUS_GET_BITRATE_REQUEST 4003 +#define OPUS_SET_MAX_BANDWIDTH_REQUEST 4004 +#define OPUS_GET_MAX_BANDWIDTH_REQUEST 4005 +#define OPUS_SET_VBR_REQUEST 4006 +#define OPUS_GET_VBR_REQUEST 4007 +#define OPUS_SET_BANDWIDTH_REQUEST 4008 +#define OPUS_GET_BANDWIDTH_REQUEST 4009 +#define OPUS_SET_COMPLEXITY_REQUEST 4010 +#define OPUS_GET_COMPLEXITY_REQUEST 4011 +#define OPUS_SET_INBAND_FEC_REQUEST 4012 +#define OPUS_GET_INBAND_FEC_REQUEST 4013 +#define OPUS_SET_PACKET_LOSS_PERC_REQUEST 4014 +#define OPUS_GET_PACKET_LOSS_PERC_REQUEST 4015 +#define OPUS_SET_DTX_REQUEST 4016 +#define OPUS_GET_DTX_REQUEST 4017 +#define OPUS_SET_VBR_CONSTRAINT_REQUEST 4020 +#define OPUS_GET_VBR_CONSTRAINT_REQUEST 4021 +#define OPUS_SET_FORCE_CHANNELS_REQUEST 4022 +#define OPUS_GET_FORCE_CHANNELS_REQUEST 4023 +#define OPUS_SET_SIGNAL_REQUEST 4024 +#define OPUS_GET_SIGNAL_REQUEST 4025 +#define OPUS_GET_LOOKAHEAD_REQUEST 4027 +/* #define OPUS_RESET_STATE 4028 */ +#define OPUS_GET_SAMPLE_RATE_REQUEST 4029 +#define OPUS_GET_FINAL_RANGE_REQUEST 4031 +#define OPUS_GET_PITCH_REQUEST 4033 +#define OPUS_SET_GAIN_REQUEST 4034 +#define OPUS_GET_GAIN_REQUEST 4045 /* Should have been 4035 */ +#define OPUS_SET_LSB_DEPTH_REQUEST 4036 +#define OPUS_GET_LSB_DEPTH_REQUEST 4037 +#define OPUS_GET_LAST_PACKET_DURATION_REQUEST 4039 +#define OPUS_SET_EXPERT_FRAME_DURATION_REQUEST 4040 +#define OPUS_GET_EXPERT_FRAME_DURATION_REQUEST 4041 +#define OPUS_SET_PREDICTION_DISABLED_REQUEST 4042 +#define OPUS_GET_PREDICTION_DISABLED_REQUEST 4043 +/* Don't use 4045, it's already taken by OPUS_GET_GAIN_REQUEST */ +#define OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST 4046 +#define OPUS_GET_PHASE_INVERSION_DISABLED_REQUEST 4047 +#define OPUS_GET_IN_DTX_REQUEST 4049 + +/** Defines for the presence of extended APIs. */ +#define OPUS_HAVE_OPUS_PROJECTION_H + +/* Macros to trigger compilation errors when the wrong types are provided to a CTL */ +#define __opus_check_int(x) (((void)((x) == (opus_int32)0)), (opus_int32)(x)) +#define __opus_check_int_ptr(ptr) ((ptr) + ((ptr) - (opus_int32*)(ptr))) +#define __opus_check_uint_ptr(ptr) ((ptr) + ((ptr) - (opus_uint32*)(ptr))) +#define __opus_check_val16_ptr(ptr) ((ptr) + ((ptr) - (opus_val16*)(ptr))) +/** @endcond */ + +/** @defgroup opus_ctlvalues Pre-defined values for CTL interface + * @see opus_genericctls, opus_encoderctls + * @{ + */ +/* Values for the various encoder CTLs */ +#define OPUS_AUTO -1000 /**<Auto/default setting @hideinitializer*/ +#define OPUS_BITRATE_MAX -1 /**<Maximum bitrate @hideinitializer*/ + +/** Best for most VoIP/videoconference applications where listening quality and intelligibility matter most + * @hideinitializer */ +#define OPUS_APPLICATION_VOIP 2048 +/** Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input + * @hideinitializer */ +#define OPUS_APPLICATION_AUDIO 2049 +/** Only use when lowest-achievable latency is what matters most. Voice-optimized modes cannot be used. + * @hideinitializer */ +#define OPUS_APPLICATION_RESTRICTED_LOWDELAY 2051 + +#define OPUS_SIGNAL_VOICE 3001 /**< Signal being encoded is voice */ +#define OPUS_SIGNAL_MUSIC 3002 /**< Signal being encoded is music */ +#define OPUS_BANDWIDTH_NARROWBAND 1101 /**< 4 kHz bandpass @hideinitializer*/ +#define OPUS_BANDWIDTH_MEDIUMBAND 1102 /**< 6 kHz bandpass @hideinitializer*/ +#define OPUS_BANDWIDTH_WIDEBAND 1103 /**< 8 kHz bandpass @hideinitializer*/ +#define OPUS_BANDWIDTH_SUPERWIDEBAND 1104 /**<12 kHz bandpass @hideinitializer*/ +#define OPUS_BANDWIDTH_FULLBAND 1105 /**<20 kHz bandpass @hideinitializer*/ + +#define OPUS_FRAMESIZE_ARG 5000 /**< Select frame size from the argument (default) */ +#define OPUS_FRAMESIZE_2_5_MS 5001 /**< Use 2.5 ms frames */ +#define OPUS_FRAMESIZE_5_MS 5002 /**< Use 5 ms frames */ +#define OPUS_FRAMESIZE_10_MS 5003 /**< Use 10 ms frames */ +#define OPUS_FRAMESIZE_20_MS 5004 /**< Use 20 ms frames */ +#define OPUS_FRAMESIZE_40_MS 5005 /**< Use 40 ms frames */ +#define OPUS_FRAMESIZE_60_MS 5006 /**< Use 60 ms frames */ +#define OPUS_FRAMESIZE_80_MS 5007 /**< Use 80 ms frames */ +#define OPUS_FRAMESIZE_100_MS 5008 /**< Use 100 ms frames */ +#define OPUS_FRAMESIZE_120_MS 5009 /**< Use 120 ms frames */ + +/**@}*/ + + +/** @defgroup opus_encoderctls Encoder related CTLs + * + * These are convenience macros for use with the \c opus_encode_ctl + * interface. They are used to generate the appropriate series of + * arguments for that call, passing the correct type, size and so + * on as expected for each particular request. + * + * Some usage examples: + * + * @code + * int ret; + * ret = opus_encoder_ctl(enc_ctx, OPUS_SET_BANDWIDTH(OPUS_AUTO)); + * if (ret != OPUS_OK) return ret; + * + * opus_int32 rate; + * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&rate)); + * + * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE); + * @endcode + * + * @see opus_genericctls, opus_encoder + * @{ + */ + +/** Configures the encoder's computational complexity. + * The supported range is 0-10 inclusive with 10 representing the highest complexity. + * @see OPUS_GET_COMPLEXITY + * @param[in] x <tt>opus_int32</tt>: Allowed values: 0-10, inclusive. + * + * @hideinitializer */ +#define OPUS_SET_COMPLEXITY(x) OPUS_SET_COMPLEXITY_REQUEST, __opus_check_int(x) +/** Gets the encoder's complexity configuration. + * @see OPUS_SET_COMPLEXITY + * @param[out] x <tt>opus_int32 *</tt>: Returns a value in the range 0-10, + * inclusive. + * @hideinitializer */ +#define OPUS_GET_COMPLEXITY(x) OPUS_GET_COMPLEXITY_REQUEST, __opus_check_int_ptr(x) + +/** Configures the bitrate in the encoder. + * Rates from 500 to 512000 bits per second are meaningful, as well as the + * special values #OPUS_AUTO and #OPUS_BITRATE_MAX. + * The value #OPUS_BITRATE_MAX can be used to cause the codec to use as much + * rate as it can, which is useful for controlling the rate by adjusting the + * output buffer size. + * @see OPUS_GET_BITRATE + * @param[in] x <tt>opus_int32</tt>: Bitrate in bits per second. The default + * is determined based on the number of + * channels and the input sampling rate. + * @hideinitializer */ +#define OPUS_SET_BITRATE(x) OPUS_SET_BITRATE_REQUEST, __opus_check_int(x) +/** Gets the encoder's bitrate configuration. + * @see OPUS_SET_BITRATE + * @param[out] x <tt>opus_int32 *</tt>: Returns the bitrate in bits per second. + * The default is determined based on the + * number of channels and the input + * sampling rate. + * @hideinitializer */ +#define OPUS_GET_BITRATE(x) OPUS_GET_BITRATE_REQUEST, __opus_check_int_ptr(x) + +/** Enables or disables variable bitrate (VBR) in the encoder. + * The configured bitrate may not be met exactly because frames must + * be an integer number of bytes in length. + * @see OPUS_GET_VBR + * @see OPUS_SET_VBR_CONSTRAINT + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Hard CBR. For LPC/hybrid modes at very low bit-rate, this can + * cause noticeable quality degradation.</dd> + * <dt>1</dt><dd>VBR (default). The exact type of VBR is controlled by + * #OPUS_SET_VBR_CONSTRAINT.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_VBR(x) OPUS_SET_VBR_REQUEST, __opus_check_int(x) +/** Determine if variable bitrate (VBR) is enabled in the encoder. + * @see OPUS_SET_VBR + * @see OPUS_GET_VBR_CONSTRAINT + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>Hard CBR.</dd> + * <dt>1</dt><dd>VBR (default). The exact type of VBR may be retrieved via + * #OPUS_GET_VBR_CONSTRAINT.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_VBR(x) OPUS_GET_VBR_REQUEST, __opus_check_int_ptr(x) + +/** Enables or disables constrained VBR in the encoder. + * This setting is ignored when the encoder is in CBR mode. + * @warning Only the MDCT mode of Opus currently heeds the constraint. + * Speech mode ignores it completely, hybrid mode may fail to obey it + * if the LPC layer uses more bitrate than the constraint would have + * permitted. + * @see OPUS_GET_VBR_CONSTRAINT + * @see OPUS_SET_VBR + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Unconstrained VBR.</dd> + * <dt>1</dt><dd>Constrained VBR (default). This creates a maximum of one + * frame of buffering delay assuming a transport with a + * serialization speed of the nominal bitrate.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_VBR_CONSTRAINT(x) OPUS_SET_VBR_CONSTRAINT_REQUEST, __opus_check_int(x) +/** Determine if constrained VBR is enabled in the encoder. + * @see OPUS_SET_VBR_CONSTRAINT + * @see OPUS_GET_VBR + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>Unconstrained VBR.</dd> + * <dt>1</dt><dd>Constrained VBR (default).</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_VBR_CONSTRAINT(x) OPUS_GET_VBR_CONSTRAINT_REQUEST, __opus_check_int_ptr(x) + +/** Configures mono/stereo forcing in the encoder. + * This can force the encoder to produce packets encoded as either mono or + * stereo, regardless of the format of the input audio. This is useful when + * the caller knows that the input signal is currently a mono source embedded + * in a stereo stream. + * @see OPUS_GET_FORCE_CHANNELS + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd> + * <dt>1</dt> <dd>Forced mono</dd> + * <dt>2</dt> <dd>Forced stereo</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_FORCE_CHANNELS(x) OPUS_SET_FORCE_CHANNELS_REQUEST, __opus_check_int(x) +/** Gets the encoder's forced channel configuration. + * @see OPUS_SET_FORCE_CHANNELS + * @param[out] x <tt>opus_int32 *</tt>: + * <dl> + * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd> + * <dt>1</dt> <dd>Forced mono</dd> + * <dt>2</dt> <dd>Forced stereo</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_FORCE_CHANNELS(x) OPUS_GET_FORCE_CHANNELS_REQUEST, __opus_check_int_ptr(x) + +/** Configures the maximum bandpass that the encoder will select automatically. + * Applications should normally use this instead of #OPUS_SET_BANDWIDTH + * (leaving that set to the default, #OPUS_AUTO). This allows the + * application to set an upper bound based on the type of input it is + * providing, but still gives the encoder the freedom to reduce the bandpass + * when the bitrate becomes too low, for better overall quality. + * @see OPUS_GET_MAX_BANDWIDTH + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd> + * <dt>OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd> + * <dt>OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd> + * <dt>OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd> + * <dt>OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband (default)</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_MAX_BANDWIDTH(x) OPUS_SET_MAX_BANDWIDTH_REQUEST, __opus_check_int(x) + +/** Gets the encoder's configured maximum allowed bandpass. + * @see OPUS_SET_MAX_BANDWIDTH + * @param[out] x <tt>opus_int32 *</tt>: Allowed values: + * <dl> + * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband (default)</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_MAX_BANDWIDTH(x) OPUS_GET_MAX_BANDWIDTH_REQUEST, __opus_check_int_ptr(x) + +/** Sets the encoder's bandpass to a specific value. + * This prevents the encoder from automatically selecting the bandpass based + * on the available bitrate. If an application knows the bandpass of the input + * audio it is providing, it should normally use #OPUS_SET_MAX_BANDWIDTH + * instead, which still gives the encoder the freedom to reduce the bandpass + * when the bitrate becomes too low, for better overall quality. + * @see OPUS_GET_BANDWIDTH + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>#OPUS_AUTO</dt> <dd>(default)</dd> + * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_BANDWIDTH(x) OPUS_SET_BANDWIDTH_REQUEST, __opus_check_int(x) + +/** Configures the type of signal being encoded. + * This is a hint which helps the encoder's mode selection. + * @see OPUS_GET_SIGNAL + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>#OPUS_AUTO</dt> <dd>(default)</dd> + * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd> + * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_SIGNAL(x) OPUS_SET_SIGNAL_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured signal type. + * @see OPUS_SET_SIGNAL + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>#OPUS_AUTO</dt> <dd>(default)</dd> + * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd> + * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_SIGNAL(x) OPUS_GET_SIGNAL_REQUEST, __opus_check_int_ptr(x) + + +/** Configures the encoder's intended application. + * The initial value is a mandatory argument to the encoder_create function. + * @see OPUS_GET_APPLICATION + * @param[in] x <tt>opus_int32</tt>: Returns one of the following values: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_APPLICATION(x) OPUS_SET_APPLICATION_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured application. + * @see OPUS_SET_APPLICATION + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_APPLICATION(x) OPUS_GET_APPLICATION_REQUEST, __opus_check_int_ptr(x) + +/** Gets the total samples of delay added by the entire codec. + * This can be queried by the encoder and then the provided number of samples can be + * skipped on from the start of the decoder's output to provide time aligned input + * and output. From the perspective of a decoding application the real data begins this many + * samples late. + * + * The decoder contribution to this delay is identical for all decoders, but the + * encoder portion of the delay may vary from implementation to implementation, + * version to version, or even depend on the encoder's initial configuration. + * Applications needing delay compensation should call this CTL rather than + * hard-coding a value. + * @param[out] x <tt>opus_int32 *</tt>: Number of lookahead samples + * @hideinitializer */ +#define OPUS_GET_LOOKAHEAD(x) OPUS_GET_LOOKAHEAD_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's use of inband forward error correction (FEC). + * @note This is only applicable to the LPC layer + * @see OPUS_GET_INBAND_FEC + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Disable inband FEC (default).</dd> + * <dt>1</dt><dd>Inband FEC enabled. If the packet loss rate is sufficiently high, Opus will automatically switch to SILK even at high rates to enable use of that FEC.</dd> + * <dt>2</dt><dd>Inband FEC enabled, but does not necessarily switch to SILK if we have music.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_INBAND_FEC(x) OPUS_SET_INBAND_FEC_REQUEST, __opus_check_int(x) +/** Gets encoder's configured use of inband forward error correction. + * @see OPUS_SET_INBAND_FEC + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>Inband FEC disabled (default).</dd> + * <dt>1</dt><dd>Inband FEC enabled. If the packet loss rate is sufficiently high, Opus will automatically switch to SILK even at high rates to enable use of that FEC.</dd> + * <dt>2</dt><dd>Inband FEC enabled, but does not necessarily switch to SILK if we have music.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_INBAND_FEC(x) OPUS_GET_INBAND_FEC_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's expected packet loss percentage. + * Higher values trigger progressively more loss resistant behavior in the encoder + * at the expense of quality at a given bitrate in the absence of packet loss, but + * greater quality under loss. + * @see OPUS_GET_PACKET_LOSS_PERC + * @param[in] x <tt>opus_int32</tt>: Loss percentage in the range 0-100, inclusive (default: 0). + * @hideinitializer */ +#define OPUS_SET_PACKET_LOSS_PERC(x) OPUS_SET_PACKET_LOSS_PERC_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured packet loss percentage. + * @see OPUS_SET_PACKET_LOSS_PERC + * @param[out] x <tt>opus_int32 *</tt>: Returns the configured loss percentage + * in the range 0-100, inclusive (default: 0). + * @hideinitializer */ +#define OPUS_GET_PACKET_LOSS_PERC(x) OPUS_GET_PACKET_LOSS_PERC_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's use of discontinuous transmission (DTX). + * @note This is only applicable to the LPC layer + * @see OPUS_GET_DTX + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Disable DTX (default).</dd> + * <dt>1</dt><dd>Enabled DTX.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_DTX(x) OPUS_SET_DTX_REQUEST, __opus_check_int(x) +/** Gets encoder's configured use of discontinuous transmission. + * @see OPUS_SET_DTX + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>DTX disabled (default).</dd> + * <dt>1</dt><dd>DTX enabled.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_DTX(x) OPUS_GET_DTX_REQUEST, __opus_check_int_ptr(x) +/** Configures the depth of signal being encoded. + * + * This is a hint which helps the encoder identify silence and near-silence. + * It represents the number of significant bits of linear intensity below + * which the signal contains ignorable quantization or other noise. + * + * For example, OPUS_SET_LSB_DEPTH(14) would be an appropriate setting + * for G.711 u-law input. OPUS_SET_LSB_DEPTH(16) would be appropriate + * for 16-bit linear pcm input with opus_encode_float(). + * + * When using opus_encode() instead of opus_encode_float(), or when libopus + * is compiled for fixed-point, the encoder uses the minimum of the value + * set here and the value 16. + * + * @see OPUS_GET_LSB_DEPTH + * @param[in] x <tt>opus_int32</tt>: Input precision in bits, between 8 and 24 + * (default: 24). + * @hideinitializer */ +#define OPUS_SET_LSB_DEPTH(x) OPUS_SET_LSB_DEPTH_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured signal depth. + * @see OPUS_SET_LSB_DEPTH + * @param[out] x <tt>opus_int32 *</tt>: Input precision in bits, between 8 and + * 24 (default: 24). + * @hideinitializer */ +#define OPUS_GET_LSB_DEPTH(x) OPUS_GET_LSB_DEPTH_REQUEST, __opus_check_int_ptr(x) + +/** Configures the encoder's use of variable duration frames. + * When variable duration is enabled, the encoder is free to use a shorter frame + * size than the one requested in the opus_encode*() call. + * It is then the user's responsibility + * to verify how much audio was encoded by checking the ToC byte of the encoded + * packet. The part of the audio that was not encoded needs to be resent to the + * encoder for the next call. Do not use this option unless you <b>really</b> + * know what you are doing. + * @see OPUS_GET_EXPERT_FRAME_DURATION + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd> + * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 5 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_80_MS</dt><dd>Use 80 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_100_MS</dt><dd>Use 100 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_120_MS</dt><dd>Use 120 ms frames.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_EXPERT_FRAME_DURATION(x) OPUS_SET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured use of variable duration frames. + * @see OPUS_SET_EXPERT_FRAME_DURATION + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd> + * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 5 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_80_MS</dt><dd>Use 80 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_100_MS</dt><dd>Use 100 ms frames.</dd> + * <dt>OPUS_FRAMESIZE_120_MS</dt><dd>Use 120 ms frames.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_EXPERT_FRAME_DURATION(x) OPUS_GET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int_ptr(x) + +/** If set to 1, disables almost all use of prediction, making frames almost + * completely independent. This reduces quality. + * @see OPUS_GET_PREDICTION_DISABLED + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Enable prediction (default).</dd> + * <dt>1</dt><dd>Disable prediction.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_PREDICTION_DISABLED(x) OPUS_SET_PREDICTION_DISABLED_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured prediction status. + * @see OPUS_SET_PREDICTION_DISABLED + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>Prediction enabled (default).</dd> + * <dt>1</dt><dd>Prediction disabled.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_PREDICTION_DISABLED(x) OPUS_GET_PREDICTION_DISABLED_REQUEST, __opus_check_int_ptr(x) + +/**@}*/ + +/** @defgroup opus_genericctls Generic CTLs + * + * These macros are used with the \c opus_decoder_ctl and + * \c opus_encoder_ctl calls to generate a particular + * request. + * + * When called on an \c OpusDecoder they apply to that + * particular decoder instance. When called on an + * \c OpusEncoder they apply to the corresponding setting + * on that encoder instance, if present. + * + * Some usage examples: + * + * @code + * int ret; + * opus_int32 pitch; + * ret = opus_decoder_ctl(dec_ctx, OPUS_GET_PITCH(&pitch)); + * if (ret == OPUS_OK) return ret; + * + * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE); + * opus_decoder_ctl(dec_ctx, OPUS_RESET_STATE); + * + * opus_int32 enc_bw, dec_bw; + * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&enc_bw)); + * opus_decoder_ctl(dec_ctx, OPUS_GET_BANDWIDTH(&dec_bw)); + * if (enc_bw != dec_bw) { + * printf("packet bandwidth mismatch!\n"); + * } + * @endcode + * + * @see opus_encoder, opus_decoder_ctl, opus_encoder_ctl, opus_decoderctls, opus_encoderctls + * @{ + */ + +/** Resets the codec state to be equivalent to a freshly initialized state. + * This should be called when switching streams in order to prevent + * the back to back decoding from giving different results from + * one at a time decoding. + * @hideinitializer */ +#define OPUS_RESET_STATE 4028 + +/** Gets the final state of the codec's entropy coder. + * This is used for testing purposes, + * The encoder and decoder state should be identical after coding a payload + * (assuming no data corruption or software bugs) + * + * @param[out] x <tt>opus_uint32 *</tt>: Entropy coder state + * + * @hideinitializer */ +#define OPUS_GET_FINAL_RANGE(x) OPUS_GET_FINAL_RANGE_REQUEST, __opus_check_uint_ptr(x) + +/** Gets the encoder's configured bandpass or the decoder's last bandpass. + * @see OPUS_SET_BANDWIDTH + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>#OPUS_AUTO</dt> <dd>(default)</dd> + * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd> + * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_BANDWIDTH(x) OPUS_GET_BANDWIDTH_REQUEST, __opus_check_int_ptr(x) + +/** Gets the sampling rate the encoder or decoder was initialized with. + * This simply returns the <code>Fs</code> value passed to opus_encoder_init() + * or opus_decoder_init(). + * @param[out] x <tt>opus_int32 *</tt>: Sampling rate of encoder or decoder. + * @hideinitializer + */ +#define OPUS_GET_SAMPLE_RATE(x) OPUS_GET_SAMPLE_RATE_REQUEST, __opus_check_int_ptr(x) + +/** If set to 1, disables the use of phase inversion for intensity stereo, + * improving the quality of mono downmixes, but slightly reducing normal + * stereo quality. Disabling phase inversion in the decoder does not comply + * with RFC 6716, although it does not cause any interoperability issue and + * is expected to become part of the Opus standard once RFC 6716 is updated + * by draft-ietf-codec-opus-update. + * @see OPUS_GET_PHASE_INVERSION_DISABLED + * @param[in] x <tt>opus_int32</tt>: Allowed values: + * <dl> + * <dt>0</dt><dd>Enable phase inversion (default).</dd> + * <dt>1</dt><dd>Disable phase inversion.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_SET_PHASE_INVERSION_DISABLED(x) OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST, __opus_check_int(x) +/** Gets the encoder's configured phase inversion status. + * @see OPUS_SET_PHASE_INVERSION_DISABLED + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>Stereo phase inversion enabled (default).</dd> + * <dt>1</dt><dd>Stereo phase inversion disabled.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_PHASE_INVERSION_DISABLED(x) OPUS_GET_PHASE_INVERSION_DISABLED_REQUEST, __opus_check_int_ptr(x) +/** Gets the DTX state of the encoder. + * Returns whether the last encoded frame was either a comfort noise update + * during DTX or not encoded because of DTX. + * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values: + * <dl> + * <dt>0</dt><dd>The encoder is not in DTX.</dd> + * <dt>1</dt><dd>The encoder is in DTX.</dd> + * </dl> + * @hideinitializer */ +#define OPUS_GET_IN_DTX(x) OPUS_GET_IN_DTX_REQUEST, __opus_check_int_ptr(x) + +/**@}*/ + +/** @defgroup opus_decoderctls Decoder related CTLs + * @see opus_genericctls, opus_encoderctls, opus_decoder + * @{ + */ + +/** Configures decoder gain adjustment. + * Scales the decoded output by a factor specified in Q8 dB units. + * This has a maximum range of -32768 to 32767 inclusive, and returns + * OPUS_BAD_ARG otherwise. The default is zero indicating no adjustment. + * This setting survives decoder reset. + * + * gain = pow(10, x/(20.0*256)) + * + * @param[in] x <tt>opus_int32</tt>: Amount to scale PCM signal by in Q8 dB units. + * @hideinitializer */ +#define OPUS_SET_GAIN(x) OPUS_SET_GAIN_REQUEST, __opus_check_int(x) +/** Gets the decoder's configured gain adjustment. @see OPUS_SET_GAIN + * + * @param[out] x <tt>opus_int32 *</tt>: Amount to scale PCM signal by in Q8 dB units. + * @hideinitializer */ +#define OPUS_GET_GAIN(x) OPUS_GET_GAIN_REQUEST, __opus_check_int_ptr(x) + +/** Gets the duration (in samples) of the last packet successfully decoded or concealed. + * @param[out] x <tt>opus_int32 *</tt>: Number of samples (at current sampling rate). + * @hideinitializer */ +#define OPUS_GET_LAST_PACKET_DURATION(x) OPUS_GET_LAST_PACKET_DURATION_REQUEST, __opus_check_int_ptr(x) + +/** Gets the pitch of the last decoded frame, if available. + * This can be used for any post-processing algorithm requiring the use of pitch, + * e.g. time stretching/shortening. If the last frame was not voiced, or if the + * pitch was not coded in the frame, then zero is returned. + * + * This CTL is only implemented for decoder instances. + * + * @param[out] x <tt>opus_int32 *</tt>: pitch period at 48 kHz (or 0 if not available) + * + * @hideinitializer */ +#define OPUS_GET_PITCH(x) OPUS_GET_PITCH_REQUEST, __opus_check_int_ptr(x) + +/**@}*/ + +/** @defgroup opus_libinfo Opus library information functions + * @{ + */ + +/** Converts an opus error code into a human readable string. + * + * @param[in] error <tt>int</tt>: Error number + * @returns Error string + */ +OPUS_EXPORT const char *opus_strerror(int error); + +/** Gets the libopus version string. + * + * Applications may look for the substring "-fixed" in the version string to + * determine whether they have a fixed-point or floating-point build at + * runtime. + * + * @returns Version string + */ +OPUS_EXPORT const char *opus_get_version_string(void); +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_DEFINES_H */ diff --git a/media/libopus/include/opus_multistream.h b/media/libopus/include/opus_multistream.h new file mode 100644 index 0000000000..babcee6905 --- /dev/null +++ b/media/libopus/include/opus_multistream.h @@ -0,0 +1,660 @@ +/* Copyright (c) 2011 Xiph.Org Foundation + Written by Jean-Marc Valin */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + * @file opus_multistream.h + * @brief Opus reference implementation multistream API + */ + +#ifndef OPUS_MULTISTREAM_H +#define OPUS_MULTISTREAM_H + +#include "opus.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @cond OPUS_INTERNAL_DOC */ + +/** Macros to trigger compilation errors when the wrong types are provided to a + * CTL. */ +/**@{*/ +#define __opus_check_encstate_ptr(ptr) ((ptr) + ((ptr) - (OpusEncoder**)(ptr))) +#define __opus_check_decstate_ptr(ptr) ((ptr) + ((ptr) - (OpusDecoder**)(ptr))) +/**@}*/ + +/** These are the actual encoder and decoder CTL ID numbers. + * They should not be used directly by applications. + * In general, SETs should be even and GETs should be odd.*/ +/**@{*/ +#define OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST 5120 +#define OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST 5122 +/**@}*/ + +/** @endcond */ + +/** @defgroup opus_multistream_ctls Multistream specific encoder and decoder CTLs + * + * These are convenience macros that are specific to the + * opus_multistream_encoder_ctl() and opus_multistream_decoder_ctl() + * interface. + * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, and + * @ref opus_decoderctls may be applied to a multistream encoder or decoder as + * well. + * In addition, you may retrieve the encoder or decoder state for an specific + * stream via #OPUS_MULTISTREAM_GET_ENCODER_STATE or + * #OPUS_MULTISTREAM_GET_DECODER_STATE and apply CTLs to it individually. + */ +/**@{*/ + +/** Gets the encoder state for an individual stream of a multistream encoder. + * @param[in] x <tt>opus_int32</tt>: The index of the stream whose encoder you + * wish to retrieve. + * This must be non-negative and less than + * the <code>streams</code> parameter used + * to initialize the encoder. + * @param[out] y <tt>OpusEncoder**</tt>: Returns a pointer to the given + * encoder state. + * @retval OPUS_BAD_ARG The index of the requested stream was out of range. + * @hideinitializer + */ +#define OPUS_MULTISTREAM_GET_ENCODER_STATE(x,y) OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST, __opus_check_int(x), __opus_check_encstate_ptr(y) + +/** Gets the decoder state for an individual stream of a multistream decoder. + * @param[in] x <tt>opus_int32</tt>: The index of the stream whose decoder you + * wish to retrieve. + * This must be non-negative and less than + * the <code>streams</code> parameter used + * to initialize the decoder. + * @param[out] y <tt>OpusDecoder**</tt>: Returns a pointer to the given + * decoder state. + * @retval OPUS_BAD_ARG The index of the requested stream was out of range. + * @hideinitializer + */ +#define OPUS_MULTISTREAM_GET_DECODER_STATE(x,y) OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST, __opus_check_int(x), __opus_check_decstate_ptr(y) + +/**@}*/ + +/** @defgroup opus_multistream Opus Multistream API + * @{ + * + * The multistream API allows individual Opus streams to be combined into a + * single packet, enabling support for up to 255 channels. Unlike an + * elementary Opus stream, the encoder and decoder must negotiate the channel + * configuration before the decoder can successfully interpret the data in the + * packets produced by the encoder. Some basic information, such as packet + * duration, can be computed without any special negotiation. + * + * The format for multistream Opus packets is defined in + * <a href="https://tools.ietf.org/html/rfc7845">RFC 7845</a> + * and is based on the self-delimited Opus framing described in Appendix B of + * <a href="https://tools.ietf.org/html/rfc6716">RFC 6716</a>. + * Normal Opus packets are just a degenerate case of multistream Opus packets, + * and can be encoded or decoded with the multistream API by setting + * <code>streams</code> to <code>1</code> when initializing the encoder or + * decoder. + * + * Multistream Opus streams can contain up to 255 elementary Opus streams. + * These may be either "uncoupled" or "coupled", indicating that the decoder + * is configured to decode them to either 1 or 2 channels, respectively. + * The streams are ordered so that all coupled streams appear at the + * beginning. + * + * A <code>mapping</code> table defines which decoded channel <code>i</code> + * should be used for each input/output (I/O) channel <code>j</code>. This table is + * typically provided as an unsigned char array. + * Let <code>i = mapping[j]</code> be the index for I/O channel <code>j</code>. + * If <code>i < 2*coupled_streams</code>, then I/O channel <code>j</code> is + * encoded as the left channel of stream <code>(i/2)</code> if <code>i</code> + * is even, or as the right channel of stream <code>(i/2)</code> if + * <code>i</code> is odd. Otherwise, I/O channel <code>j</code> is encoded as + * mono in stream <code>(i - coupled_streams)</code>, unless it has the special + * value 255, in which case it is omitted from the encoding entirely (the + * decoder will reproduce it as silence). Each value <code>i</code> must either + * be the special value 255 or be less than <code>streams + coupled_streams</code>. + * + * The output channels specified by the encoder + * should use the + * <a href="https://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-810004.3.9">Vorbis + * channel ordering</a>. A decoder may wish to apply an additional permutation + * to the mapping the encoder used to achieve a different output channel + * order (e.g. for outputing in WAV order). + * + * Each multistream packet contains an Opus packet for each stream, and all of + * the Opus packets in a single multistream packet must have the same + * duration. Therefore the duration of a multistream packet can be extracted + * from the TOC sequence of the first stream, which is located at the + * beginning of the packet, just like an elementary Opus stream: + * + * @code + * int nb_samples; + * int nb_frames; + * nb_frames = opus_packet_get_nb_frames(data, len); + * if (nb_frames < 1) + * return nb_frames; + * nb_samples = opus_packet_get_samples_per_frame(data, 48000) * nb_frames; + * @endcode + * + * The general encoding and decoding process proceeds exactly the same as in + * the normal @ref opus_encoder and @ref opus_decoder APIs. + * See their documentation for an overview of how to use the corresponding + * multistream functions. + */ + +/** Opus multistream encoder state. + * This contains the complete state of a multistream Opus encoder. + * It is position independent and can be freely copied. + * @see opus_multistream_encoder_create + * @see opus_multistream_encoder_init + */ +typedef struct OpusMSEncoder OpusMSEncoder; + +/** Opus multistream decoder state. + * This contains the complete state of a multistream Opus decoder. + * It is position independent and can be freely copied. + * @see opus_multistream_decoder_create + * @see opus_multistream_decoder_init + */ +typedef struct OpusMSDecoder OpusMSDecoder; + +/**\name Multistream encoder functions */ +/**@{*/ + +/** Gets the size of an OpusMSEncoder structure. + * @param streams <tt>int</tt>: The total number of streams to encode from the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams + * to encode. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * encoded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @returns The size in bytes on success, or a negative error code + * (see @ref opus_errorcodes) on error. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_encoder_get_size( + int streams, + int coupled_streams +); + +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_surround_encoder_get_size( + int channels, + int mapping_family +); + + +/** Allocates and initializes a multistream encoder state. + * Call opus_multistream_encoder_destroy() to release + * this object when finished. + * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels in the input signal. + * This must be at most 255. + * It may be greater than the number of + * coded channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams to encode from the + * input. + * This must be no more than the number of channels. + * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams + * to encode. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * encoded channels (<code>streams + + * coupled_streams</code>) must be no + * more than the number of input channels. + * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from + * encoded channels to input channels, as described in + * @ref opus_multistream. As an extra constraint, the + * multistream encoder does not allow encoding coupled + * streams for which one channel is unused since this + * is never a good idea. + * @param application <tt>int</tt>: The target encoder application. + * This must be one of the following: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error + * code (see @ref opus_errorcodes) on + * failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_encoder_create( + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + const unsigned char *mapping, + int application, + int *error +) OPUS_ARG_NONNULL(5); + +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_surround_encoder_create( + opus_int32 Fs, + int channels, + int mapping_family, + int *streams, + int *coupled_streams, + unsigned char *mapping, + int application, + int *error +) OPUS_ARG_NONNULL(4) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6); + +/** Initialize a previously allocated multistream encoder state. + * The memory pointed to by \a st must be at least the size returned by + * opus_multistream_encoder_get_size(). + * This is intended for applications which use their own allocator instead of + * malloc. + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @see opus_multistream_encoder_create + * @see opus_multistream_encoder_get_size + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize. + * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels in the input signal. + * This must be at most 255. + * It may be greater than the number of + * coded channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams to encode from the + * input. + * This must be no more than the number of channels. + * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams + * to encode. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * encoded channels (<code>streams + + * coupled_streams</code>) must be no + * more than the number of input channels. + * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from + * encoded channels to input channels, as described in + * @ref opus_multistream. As an extra constraint, the + * multistream encoder does not allow encoding coupled + * streams for which one channel is unused since this + * is never a good idea. + * @param application <tt>int</tt>: The target encoder application. + * This must be one of the following: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) + * on failure. + */ +OPUS_EXPORT int opus_multistream_encoder_init( + OpusMSEncoder *st, + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + const unsigned char *mapping, + int application +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); + +OPUS_EXPORT int opus_multistream_surround_encoder_init( + OpusMSEncoder *st, + opus_int32 Fs, + int channels, + int mapping_family, + int *streams, + int *coupled_streams, + unsigned char *mapping, + int application +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6) OPUS_ARG_NONNULL(7); + +/** Encodes a multistream Opus frame. + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. + * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved + * samples. + * This must contain + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: Number of samples per channel in the input + * signal. + * This must be an Opus frame size for the + * encoder's sampling rate. + * For example, at 48 kHz the permitted values + * are 120, 240, 480, 960, 1920, and 2880. + * Passing in a duration of less than 10 ms + * (480 samples at 48 kHz) will prevent the + * encoder from using the LPC or hybrid modes. + * @param[out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode( + OpusMSEncoder *st, + const opus_int16 *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Encodes a multistream Opus frame from floating point input. + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. + * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved + * samples with a normal range of + * +/-1.0. + * Samples with a range beyond +/-1.0 + * are supported but will be clipped by + * decoders using the integer API and + * should only be used if it is known + * that the far end supports extended + * dynamic range. + * This must contain + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: Number of samples per channel in the input + * signal. + * This must be an Opus frame size for the + * encoder's sampling rate. + * For example, at 48 kHz the permitted values + * are 120, 240, 480, 960, 1920, and 2880. + * Passing in a duration of less than 10 ms + * (480 samples at 48 kHz) will prevent the + * encoder from using the LPC or hybrid modes. + * @param[out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode_float( + OpusMSEncoder *st, + const float *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Frees an <code>OpusMSEncoder</code> allocated by + * opus_multistream_encoder_create(). + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to be freed. + */ +OPUS_EXPORT void opus_multistream_encoder_destroy(OpusMSEncoder *st); + +/** Perform a CTL function on a multistream Opus encoder. + * + * Generally the request and subsequent arguments are generated by a + * convenience macro. + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls, + * @ref opus_encoderctls, or @ref opus_multistream_ctls. + * @see opus_genericctls + * @see opus_encoderctls + * @see opus_multistream_ctls + */ +OPUS_EXPORT int opus_multistream_encoder_ctl(OpusMSEncoder *st, int request, ...) OPUS_ARG_NONNULL(1); + +/**@}*/ + +/**\name Multistream decoder functions */ +/**@{*/ + +/** Gets the size of an <code>OpusMSDecoder</code> structure. + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @returns The size in bytes on success, or a negative error code + * (see @ref opus_errorcodes) on error. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_decoder_get_size( + int streams, + int coupled_streams +); + +/** Allocates and initializes a multistream decoder state. + * Call opus_multistream_decoder_destroy() to release + * this object when finished. + * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels to output. + * This must be at most 255. + * It may be different from the number of coded + * channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from + * coded channels to output channels, as described in + * @ref opus_multistream. + * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error + * code (see @ref opus_errorcodes) on + * failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSDecoder *opus_multistream_decoder_create( + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + const unsigned char *mapping, + int *error +) OPUS_ARG_NONNULL(5); + +/** Intialize a previously allocated decoder state object. + * The memory pointed to by \a st must be at least the size returned by + * opus_multistream_encoder_get_size(). + * This is intended for applications which use their own allocator instead of + * malloc. + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @see opus_multistream_decoder_create + * @see opus_multistream_deocder_get_size + * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize. + * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels to output. + * This must be at most 255. + * It may be different from the number of coded + * channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from + * coded channels to output channels, as described in + * @ref opus_multistream. + * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) + * on failure. + */ +OPUS_EXPORT int opus_multistream_decoder_init( + OpusMSDecoder *st, + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + const unsigned char *mapping +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); + +/** Decode a multistream Opus packet. + * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. + * @param[in] data <tt>const unsigned char*</tt>: Input payload. + * Use a <code>NULL</code> + * pointer to indicate packet + * loss. + * @param len <tt>opus_int32</tt>: Number of bytes in payload. + * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved + * samples. + * This must contain room for + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: The number of samples per channel of + * available space in \a pcm. + * If this is less than the maximum packet duration + * (120 ms; 5760 for 48kHz), this function will not be capable + * of decoding some packets. In the case of PLC (data==NULL) + * or FEC (decode_fec=1), then frame_size needs to be exactly + * the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the + * next incoming packet. For the PLC and FEC cases, frame_size + * <b>must</b> be a multiple of 2.5 ms. + * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band + * forward error correction data be decoded. + * If no such data is available, the frame is + * decoded as if it were lost. + * @returns Number of samples decoded on success or a negative error code + * (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode( + OpusMSDecoder *st, + const unsigned char *data, + opus_int32 len, + opus_int16 *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Decode a multistream Opus packet with floating point output. + * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. + * @param[in] data <tt>const unsigned char*</tt>: Input payload. + * Use a <code>NULL</code> + * pointer to indicate packet + * loss. + * @param len <tt>opus_int32</tt>: Number of bytes in payload. + * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved + * samples. + * This must contain room for + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: The number of samples per channel of + * available space in \a pcm. + * If this is less than the maximum packet duration + * (120 ms; 5760 for 48kHz), this function will not be capable + * of decoding some packets. In the case of PLC (data==NULL) + * or FEC (decode_fec=1), then frame_size needs to be exactly + * the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the + * next incoming packet. For the PLC and FEC cases, frame_size + * <b>must</b> be a multiple of 2.5 ms. + * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band + * forward error correction data be decoded. + * If no such data is available, the frame is + * decoded as if it were lost. + * @returns Number of samples decoded on success or a negative error code + * (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode_float( + OpusMSDecoder *st, + const unsigned char *data, + opus_int32 len, + float *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Perform a CTL function on a multistream Opus decoder. + * + * Generally the request and subsequent arguments are generated by a + * convenience macro. + * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls, + * @ref opus_decoderctls, or @ref opus_multistream_ctls. + * @see opus_genericctls + * @see opus_decoderctls + * @see opus_multistream_ctls + */ +OPUS_EXPORT int opus_multistream_decoder_ctl(OpusMSDecoder *st, int request, ...) OPUS_ARG_NONNULL(1); + +/** Frees an <code>OpusMSDecoder</code> allocated by + * opus_multistream_decoder_create(). + * @param st <tt>OpusMSDecoder</tt>: Multistream decoder state to be freed. + */ +OPUS_EXPORT void opus_multistream_decoder_destroy(OpusMSDecoder *st); + +/**@}*/ + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_MULTISTREAM_H */ diff --git a/media/libopus/include/opus_projection.h b/media/libopus/include/opus_projection.h new file mode 100644 index 0000000000..9dabf4e85c --- /dev/null +++ b/media/libopus/include/opus_projection.h @@ -0,0 +1,568 @@ +/* Copyright (c) 2017 Google Inc. + Written by Andrew Allen */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + * @file opus_projection.h + * @brief Opus projection reference API + */ + +#ifndef OPUS_PROJECTION_H +#define OPUS_PROJECTION_H + +#include "opus_multistream.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @cond OPUS_INTERNAL_DOC */ + +/** These are the actual encoder and decoder CTL ID numbers. + * They should not be used directly by applications.c + * In general, SETs should be even and GETs should be odd.*/ +/**@{*/ +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST 6001 +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST 6003 +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST 6005 +/**@}*/ + + +/** @endcond */ + +/** @defgroup opus_projection_ctls Projection specific encoder and decoder CTLs + * + * These are convenience macros that are specific to the + * opus_projection_encoder_ctl() and opus_projection_decoder_ctl() + * interface. + * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, + * @ref opus_decoderctls, and @ref opus_multistream_ctls may be applied to a + * projection encoder or decoder as well. + */ +/**@{*/ + +/** Gets the gain (in dB. S7.8-format) of the demixing matrix from the encoder. + * @param[out] x <tt>opus_int32 *</tt>: Returns the gain (in dB. S7.8-format) + * of the demixing matrix. + * @hideinitializer + */ +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST, __opus_check_int_ptr(x) + + +/** Gets the size in bytes of the demixing matrix from the encoder. + * @param[out] x <tt>opus_int32 *</tt>: Returns the size in bytes of the + * demixing matrix. + * @hideinitializer + */ +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST, __opus_check_int_ptr(x) + + +/** Copies the demixing matrix to the supplied pointer location. + * @param[out] x <tt>unsigned char *</tt>: Returns the demixing matrix to the + * supplied pointer location. + * @param y <tt>opus_int32</tt>: The size in bytes of the reserved memory at the + * pointer location. + * @hideinitializer + */ +#define OPUS_PROJECTION_GET_DEMIXING_MATRIX(x,y) OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST, x, __opus_check_int(y) + + +/**@}*/ + +/** Opus projection encoder state. + * This contains the complete state of a projection Opus encoder. + * It is position independent and can be freely copied. + * @see opus_projection_ambisonics_encoder_create + */ +typedef struct OpusProjectionEncoder OpusProjectionEncoder; + + +/** Opus projection decoder state. + * This contains the complete state of a projection Opus decoder. + * It is position independent and can be freely copied. + * @see opus_projection_decoder_create + * @see opus_projection_decoder_init + */ +typedef struct OpusProjectionDecoder OpusProjectionDecoder; + + +/**\name Projection encoder functions */ +/**@{*/ + +/** Gets the size of an OpusProjectionEncoder structure. + * @param channels <tt>int</tt>: The total number of input channels to encode. + * This must be no more than 255. + * @param mapping_family <tt>int</tt>: The mapping family to use for selecting + * the appropriate projection. + * @returns The size in bytes on success, or a negative error code + * (see @ref opus_errorcodes) on error. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_ambisonics_encoder_get_size( + int channels, + int mapping_family +); + + +/** Allocates and initializes a projection encoder state. + * Call opus_projection_encoder_destroy() to release + * this object when finished. + * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels in the input signal. + * This must be at most 255. + * It may be greater than the number of + * coded channels (<code>streams + + * coupled_streams</code>). + * @param mapping_family <tt>int</tt>: The mapping family to use for selecting + * the appropriate projection. + * @param[out] streams <tt>int *</tt>: The total number of streams that will + * be encoded from the input. + * @param[out] coupled_streams <tt>int *</tt>: Number of coupled (2 channel) + * streams that will be encoded from the input. + * @param application <tt>int</tt>: The target encoder application. + * This must be one of the following: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error + * code (see @ref opus_errorcodes) on + * failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionEncoder *opus_projection_ambisonics_encoder_create( + opus_int32 Fs, + int channels, + int mapping_family, + int *streams, + int *coupled_streams, + int application, + int *error +) OPUS_ARG_NONNULL(4) OPUS_ARG_NONNULL(5); + + +/** Initialize a previously allocated projection encoder state. + * The memory pointed to by \a st must be at least the size returned by + * opus_projection_ambisonics_encoder_get_size(). + * This is intended for applications which use their own allocator instead of + * malloc. + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @see opus_projection_ambisonics_encoder_create + * @see opus_projection_ambisonics_encoder_get_size + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to initialize. + * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels in the input signal. + * This must be at most 255. + * It may be greater than the number of + * coded channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams to encode from the + * input. + * This must be no more than the number of channels. + * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams + * to encode. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * encoded channels (<code>streams + + * coupled_streams</code>) must be no + * more than the number of input channels. + * @param application <tt>int</tt>: The target encoder application. + * This must be one of the following: + * <dl> + * <dt>#OPUS_APPLICATION_VOIP</dt> + * <dd>Process signal for improved speech intelligibility.</dd> + * <dt>#OPUS_APPLICATION_AUDIO</dt> + * <dd>Favor faithfulness to the original input.</dd> + * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> + * <dd>Configure the minimum possible coding delay by disabling certain modes + * of operation.</dd> + * </dl> + * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) + * on failure. + */ +OPUS_EXPORT int opus_projection_ambisonics_encoder_init( + OpusProjectionEncoder *st, + opus_int32 Fs, + int channels, + int mapping_family, + int *streams, + int *coupled_streams, + int application +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6); + + +/** Encodes a projection Opus frame. + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state. + * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved + * samples. + * This must contain + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: Number of samples per channel in the input + * signal. + * This must be an Opus frame size for the + * encoder's sampling rate. + * For example, at 48 kHz the permitted values + * are 120, 240, 480, 960, 1920, and 2880. + * Passing in a duration of less than 10 ms + * (480 samples at 48 kHz) will prevent the + * encoder from using the LPC or hybrid modes. + * @param[out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode( + OpusProjectionEncoder *st, + const opus_int16 *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + + +/** Encodes a projection Opus frame from floating point input. + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state. + * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved + * samples with a normal range of + * +/-1.0. + * Samples with a range beyond +/-1.0 + * are supported but will be clipped by + * decoders using the integer API and + * should only be used if it is known + * that the far end supports extended + * dynamic range. + * This must contain + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: Number of samples per channel in the input + * signal. + * This must be an Opus frame size for the + * encoder's sampling rate. + * For example, at 48 kHz the permitted values + * are 120, 240, 480, 960, 1920, and 2880. + * Passing in a duration of less than 10 ms + * (480 samples at 48 kHz) will prevent the + * encoder from using the LPC or hybrid modes. + * @param[out] data <tt>unsigned char*</tt>: Output payload. + * This must contain storage for at + * least \a max_data_bytes. + * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated + * memory for the output + * payload. This may be + * used to impose an upper limit on + * the instant bitrate, but should + * not be used as the only bitrate + * control. Use #OPUS_SET_BITRATE to + * control the bitrate. + * @returns The length of the encoded packet (in bytes) on success or a + * negative error code (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode_float( + OpusProjectionEncoder *st, + const float *pcm, + int frame_size, + unsigned char *data, + opus_int32 max_data_bytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + + +/** Frees an <code>OpusProjectionEncoder</code> allocated by + * opus_projection_ambisonics_encoder_create(). + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to be freed. + */ +OPUS_EXPORT void opus_projection_encoder_destroy(OpusProjectionEncoder *st); + + +/** Perform a CTL function on a projection Opus encoder. + * + * Generally the request and subsequent arguments are generated by a + * convenience macro. + * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls, + * @ref opus_encoderctls, @ref opus_multistream_ctls, or + * @ref opus_projection_ctls + * @see opus_genericctls + * @see opus_encoderctls + * @see opus_multistream_ctls + * @see opus_projection_ctls + */ +OPUS_EXPORT int opus_projection_encoder_ctl(OpusProjectionEncoder *st, int request, ...) OPUS_ARG_NONNULL(1); + + +/**@}*/ + +/**\name Projection decoder functions */ +/**@{*/ + +/** Gets the size of an <code>OpusProjectionDecoder</code> structure. + * @param channels <tt>int</tt>: The total number of output channels. + * This must be no more than 255. + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @returns The size in bytes on success, or a negative error code + * (see @ref opus_errorcodes) on error. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_decoder_get_size( + int channels, + int streams, + int coupled_streams +); + + +/** Allocates and initializes a projection decoder state. + * Call opus_projection_decoder_destroy() to release + * this object when finished. + * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels to output. + * This must be at most 255. + * It may be different from the number of coded + * channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix + * that mapping from coded channels to output channels, + * as described in @ref opus_projection and + * @ref opus_projection_ctls. + * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the + * demixing matrix, as + * described in @ref + * opus_projection_ctls. + * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error + * code (see @ref opus_errorcodes) on + * failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionDecoder *opus_projection_decoder_create( + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + unsigned char *demixing_matrix, + opus_int32 demixing_matrix_size, + int *error +) OPUS_ARG_NONNULL(5); + + +/** Intialize a previously allocated projection decoder state object. + * The memory pointed to by \a st must be at least the size returned by + * opus_projection_decoder_get_size(). + * This is intended for applications which use their own allocator instead of + * malloc. + * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. + * @see opus_projection_decoder_create + * @see opus_projection_deocder_get_size + * @param st <tt>OpusProjectionDecoder*</tt>: Projection encoder state to initialize. + * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). + * This must be one of 8000, 12000, 16000, + * 24000, or 48000. + * @param channels <tt>int</tt>: Number of channels to output. + * This must be at most 255. + * It may be different from the number of coded + * channels (<code>streams + + * coupled_streams</code>). + * @param streams <tt>int</tt>: The total number of streams coded in the + * input. + * This must be no more than 255. + * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled + * (2 channel) streams. + * This must be no larger than the total + * number of streams. + * Additionally, The total number of + * coded channels (<code>streams + + * coupled_streams</code>) must be no + * more than 255. + * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix + * that mapping from coded channels to output channels, + * as described in @ref opus_projection and + * @ref opus_projection_ctls. + * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the + * demixing matrix, as + * described in @ref + * opus_projection_ctls. + * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) + * on failure. + */ +OPUS_EXPORT int opus_projection_decoder_init( + OpusProjectionDecoder *st, + opus_int32 Fs, + int channels, + int streams, + int coupled_streams, + unsigned char *demixing_matrix, + opus_int32 demixing_matrix_size +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); + + +/** Decode a projection Opus packet. + * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state. + * @param[in] data <tt>const unsigned char*</tt>: Input payload. + * Use a <code>NULL</code> + * pointer to indicate packet + * loss. + * @param len <tt>opus_int32</tt>: Number of bytes in payload. + * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved + * samples. + * This must contain room for + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: The number of samples per channel of + * available space in \a pcm. + * If this is less than the maximum packet duration + * (120 ms; 5760 for 48kHz), this function will not be capable + * of decoding some packets. In the case of PLC (data==NULL) + * or FEC (decode_fec=1), then frame_size needs to be exactly + * the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the + * next incoming packet. For the PLC and FEC cases, frame_size + * <b>must</b> be a multiple of 2.5 ms. + * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band + * forward error correction data be decoded. + * If no such data is available, the frame is + * decoded as if it were lost. + * @returns Number of samples decoded on success or a negative error code + * (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode( + OpusProjectionDecoder *st, + const unsigned char *data, + opus_int32 len, + opus_int16 *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + + +/** Decode a projection Opus packet with floating point output. + * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state. + * @param[in] data <tt>const unsigned char*</tt>: Input payload. + * Use a <code>NULL</code> + * pointer to indicate packet + * loss. + * @param len <tt>opus_int32</tt>: Number of bytes in payload. + * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved + * samples. + * This must contain room for + * <code>frame_size*channels</code> + * samples. + * @param frame_size <tt>int</tt>: The number of samples per channel of + * available space in \a pcm. + * If this is less than the maximum packet duration + * (120 ms; 5760 for 48kHz), this function will not be capable + * of decoding some packets. In the case of PLC (data==NULL) + * or FEC (decode_fec=1), then frame_size needs to be exactly + * the duration of audio that is missing, otherwise the + * decoder will not be in the optimal state to decode the + * next incoming packet. For the PLC and FEC cases, frame_size + * <b>must</b> be a multiple of 2.5 ms. + * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band + * forward error correction data be decoded. + * If no such data is available, the frame is + * decoded as if it were lost. + * @returns Number of samples decoded on success or a negative error code + * (see @ref opus_errorcodes) on failure. + */ +OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode_float( + OpusProjectionDecoder *st, + const unsigned char *data, + opus_int32 len, + float *pcm, + int frame_size, + int decode_fec +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + + +/** Perform a CTL function on a projection Opus decoder. + * + * Generally the request and subsequent arguments are generated by a + * convenience macro. + * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state. + * @param request This and all remaining parameters should be replaced by one + * of the convenience macros in @ref opus_genericctls, + * @ref opus_decoderctls, @ref opus_multistream_ctls, or + * @ref opus_projection_ctls. + * @see opus_genericctls + * @see opus_decoderctls + * @see opus_multistream_ctls + * @see opus_projection_ctls + */ +OPUS_EXPORT int opus_projection_decoder_ctl(OpusProjectionDecoder *st, int request, ...) OPUS_ARG_NONNULL(1); + + +/** Frees an <code>OpusProjectionDecoder</code> allocated by + * opus_projection_decoder_create(). + * @param st <tt>OpusProjectionDecoder</tt>: Projection decoder state to be freed. + */ +OPUS_EXPORT void opus_projection_decoder_destroy(OpusProjectionDecoder *st); + + +/**@}*/ + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_PROJECTION_H */ diff --git a/media/libopus/include/opus_types.h b/media/libopus/include/opus_types.h new file mode 100644 index 0000000000..7cf675580f --- /dev/null +++ b/media/libopus/include/opus_types.h @@ -0,0 +1,166 @@ +/* (C) COPYRIGHT 1994-2002 Xiph.Org Foundation */ +/* Modified by Jean-Marc Valin */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ +/* opus_types.h based on ogg_types.h from libogg */ + +/** + @file opus_types.h + @brief Opus reference implementation types +*/ +#ifndef OPUS_TYPES_H +#define OPUS_TYPES_H + +#define opus_int int /* used for counters etc; at least 16 bits */ +#define opus_int64 long long +#define opus_int8 signed char + +#define opus_uint unsigned int /* used for counters etc; at least 16 bits */ +#define opus_uint64 unsigned long long +#define opus_uint8 unsigned char + +/* Use the real stdint.h if it's there (taken from Paul Hsieh's pstdint.h) */ +#if (defined(__STDC__) && __STDC__ && defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L) || (defined(__GNUC__) && (defined(_STDINT_H) || defined(_STDINT_H_)) || defined (HAVE_STDINT_H)) +#include <stdint.h> +# undef opus_int64 +# undef opus_int8 +# undef opus_uint64 +# undef opus_uint8 + typedef int8_t opus_int8; + typedef uint8_t opus_uint8; + typedef int16_t opus_int16; + typedef uint16_t opus_uint16; + typedef int32_t opus_int32; + typedef uint32_t opus_uint32; + typedef int64_t opus_int64; + typedef uint64_t opus_uint64; +#elif defined(_WIN32) + +# if defined(__CYGWIN__) +# include <_G_config.h> + typedef _G_int32_t opus_int32; + typedef _G_uint32_t opus_uint32; + typedef _G_int16 opus_int16; + typedef _G_uint16 opus_uint16; +# elif defined(__MINGW32__) + typedef short opus_int16; + typedef unsigned short opus_uint16; + typedef int opus_int32; + typedef unsigned int opus_uint32; +# elif defined(__MWERKS__) + typedef int opus_int32; + typedef unsigned int opus_uint32; + typedef short opus_int16; + typedef unsigned short opus_uint16; +# else + /* MSVC/Borland */ + typedef __int32 opus_int32; + typedef unsigned __int32 opus_uint32; + typedef __int16 opus_int16; + typedef unsigned __int16 opus_uint16; +# endif + +#elif defined(__MACOS__) + +# include <sys/types.h> + typedef SInt16 opus_int16; + typedef UInt16 opus_uint16; + typedef SInt32 opus_int32; + typedef UInt32 opus_uint32; + +#elif (defined(__APPLE__) && defined(__MACH__)) /* MacOS X Framework build */ + +# include <sys/types.h> + typedef int16_t opus_int16; + typedef u_int16_t opus_uint16; + typedef int32_t opus_int32; + typedef u_int32_t opus_uint32; + +#elif defined(__BEOS__) + + /* Be */ +# include <inttypes.h> + typedef int16 opus_int16; + typedef u_int16 opus_uint16; + typedef int32_t opus_int32; + typedef u_int32_t opus_uint32; + +#elif defined (__EMX__) + + /* OS/2 GCC */ + typedef short opus_int16; + typedef unsigned short opus_uint16; + typedef int opus_int32; + typedef unsigned int opus_uint32; + +#elif defined (DJGPP) + + /* DJGPP */ + typedef short opus_int16; + typedef unsigned short opus_uint16; + typedef int opus_int32; + typedef unsigned int opus_uint32; + +#elif defined(R5900) + + /* PS2 EE */ + typedef int opus_int32; + typedef unsigned opus_uint32; + typedef short opus_int16; + typedef unsigned short opus_uint16; + +#elif defined(__SYMBIAN32__) + + /* Symbian GCC */ + typedef signed short opus_int16; + typedef unsigned short opus_uint16; + typedef signed int opus_int32; + typedef unsigned int opus_uint32; + +#elif defined(CONFIG_TI_C54X) || defined (CONFIG_TI_C55X) + + typedef short opus_int16; + typedef unsigned short opus_uint16; + typedef long opus_int32; + typedef unsigned long opus_uint32; + +#elif defined(CONFIG_TI_C6X) + + typedef short opus_int16; + typedef unsigned short opus_uint16; + typedef int opus_int32; + typedef unsigned int opus_uint32; + +#else + + /* Give up, take a reasonable guess */ + typedef short opus_int16; + typedef unsigned short opus_uint16; + typedef int opus_int32; + typedef unsigned int opus_uint32; + +#endif + +#endif /* OPUS_TYPES_H */ |