path: root/js/src/jit/mips32/Trampoline-mips32.cpp

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 * vim: set ts=8 sts=2 et sw=2 tw=80:
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "mozilla/DebugOnly.h"

#include "jit/Bailouts.h"
#include "jit/BaselineFrame.h"
#include "jit/CalleeToken.h"
#include "jit/JitFrames.h"
#include "jit/JitRuntime.h"
#include "jit/JitSpewer.h"
#include "jit/mips-shared/SharedICHelpers-mips-shared.h"
#include "jit/PerfSpewer.h"
#include "jit/VMFunctions.h"
#include "vm/JitActivation.h"  // js::jit::JitActivation
#include "vm/JSContext.h"
#include "vm/Realm.h"

#include "jit/MacroAssembler-inl.h"

using namespace js;
using namespace js::jit;

static_assert(sizeof(uintptr_t) == sizeof(uint32_t), "Not 64-bit clean.");

struct EnterJITRegs {
  double f30;
  double f28;
  double f26;
  double f24;
  double f22;
  double f20;

  // non-volatile registers.
  uintptr_t ra;
  uintptr_t fp;
  uintptr_t s7;
  uintptr_t s6;
  uintptr_t s5;
  uintptr_t s4;
  uintptr_t s3;
  uintptr_t s2;
  uintptr_t s1;
  uintptr_t s0;
};

struct EnterJITArgs {
  // First 4 argumet placeholders
  void* jitcode;  // <- sp points here when function is entered.
  int maxArgc;
  Value* maxArgv;
  InterpreterFrame* fp;

  // Arguments on stack
  CalleeToken calleeToken;
  JSObject* scopeChain;
  size_t numStackValues;
  Value* vp;
};

static void GenerateReturn(MacroAssembler& masm, int returnCode) {
  MOZ_ASSERT(masm.framePushed() == sizeof(EnterJITRegs));

  // Restore non-volatile registers
  masm.as_lw(s0, StackPointer, offsetof(EnterJITRegs, s0));
  masm.as_lw(s1, StackPointer, offsetof(EnterJITRegs, s1));
  masm.as_lw(s2, StackPointer, offsetof(EnterJITRegs, s2));
  masm.as_lw(s3, StackPointer, offsetof(EnterJITRegs, s3));
  masm.as_lw(s4, StackPointer, offsetof(EnterJITRegs, s4));
  masm.as_lw(s5, StackPointer, offsetof(EnterJITRegs, s5));
  masm.as_lw(s6, StackPointer, offsetof(EnterJITRegs, s6));
  masm.as_lw(s7, StackPointer, offsetof(EnterJITRegs, s7));
  masm.as_lw(fp, StackPointer, offsetof(EnterJITRegs, fp));
  masm.as_lw(ra, StackPointer, offsetof(EnterJITRegs, ra));

  // Restore non-volatile floating point registers
  masm.as_ldc1(f20, StackPointer, offsetof(EnterJITRegs, f20));
  masm.as_ldc1(f22, StackPointer, offsetof(EnterJITRegs, f22));
  masm.as_ldc1(f24, StackPointer, offsetof(EnterJITRegs, f24));
  masm.as_ldc1(f26, StackPointer, offsetof(EnterJITRegs, f26));
  masm.as_ldc1(f28, StackPointer, offsetof(EnterJITRegs, f28));
  masm.as_ldc1(f30, StackPointer, offsetof(EnterJITRegs, f30));

  masm.freeStack(sizeof(EnterJITRegs));

  masm.branch(ra);
}

static void GeneratePrologue(MacroAssembler& masm) {
  // Save non-volatile registers. These must be saved by the trampoline,
  // rather than the JIT'd code, because they are scanned by the conservative
  // scanner.
  masm.reserveStack(sizeof(EnterJITRegs));
  masm.as_sw(s0, StackPointer, offsetof(EnterJITRegs, s0));
  masm.as_sw(s1, StackPointer, offsetof(EnterJITRegs, s1));
  masm.as_sw(s2, StackPointer, offsetof(EnterJITRegs, s2));
  masm.as_sw(s3, StackPointer, offsetof(EnterJITRegs, s3));
  masm.as_sw(s4, StackPointer, offsetof(EnterJITRegs, s4));
  masm.as_sw(s5, StackPointer, offsetof(EnterJITRegs, s5));
  masm.as_sw(s6, StackPointer, offsetof(EnterJITRegs, s6));
  masm.as_sw(s7, StackPointer, offsetof(EnterJITRegs, s7));
  masm.as_sw(fp, StackPointer, offsetof(EnterJITRegs, fp));
  masm.as_sw(ra, StackPointer, offsetof(EnterJITRegs, ra));

  masm.as_sdc1(f20, StackPointer, offsetof(EnterJITRegs, f20));
  masm.as_sdc1(f22, StackPointer, offsetof(EnterJITRegs, f22));
  masm.as_sdc1(f24, StackPointer, offsetof(EnterJITRegs, f24));
  masm.as_sdc1(f26, StackPointer, offsetof(EnterJITRegs, f26));
  masm.as_sdc1(f28, StackPointer, offsetof(EnterJITRegs, f28));
  masm.as_sdc1(f30, StackPointer, offsetof(EnterJITRegs, f30));
}

/*
 * This method generates a trampoline for a c++ function with the following
 * signature:
 *   void enter(void* code, int argc, Value* argv, InterpreterFrame* fp,
 *              CalleeToken calleeToken, JSObject* scopeChain, Value* vp)
 *   ...using standard EABI calling convention
 */
void JitRuntime::generateEnterJIT(JSContext* cx, MacroAssembler& masm) {
  enterJITOffset_ = startTrampolineCode(masm);

  const Register reg_code = a0;
  const Register reg_argc = a1;
  const Register reg_argv = a2;
  const mozilla::DebugOnly<Register> reg_frame = a3;

  MOZ_ASSERT(OsrFrameReg == reg_frame);

  GeneratePrologue(masm);

  const Address slotToken(
      sp, sizeof(EnterJITRegs) + offsetof(EnterJITArgs, calleeToken));
  const Address slotVp(sp, sizeof(EnterJITRegs) + offsetof(EnterJITArgs, vp));

  // Save stack pointer into s4
  masm.movePtr(StackPointer, s4);

  // Load calleeToken into s2.
  masm.loadPtr(slotToken, s2);

  // Save stack pointer as baseline frame.
  masm.movePtr(StackPointer, FramePointer);

  // Load the number of actual arguments into s3.
  masm.loadPtr(slotVp, s3);
  masm.unboxInt32(Address(s3, 0), s3);

  /***************************************************************
  Loop over argv vector, push arguments onto stack in reverse order
  ***************************************************************/

  // if we are constructing, that also needs to include newTarget
  {
    Label noNewTarget;
    masm.branchTest32(Assembler::Zero, s2,
                      Imm32(CalleeToken_FunctionConstructing), &noNewTarget);

    masm.add32(Imm32(1), reg_argc);

    masm.bind(&noNewTarget);
  }

  masm.as_sll(s0, reg_argc, 3);  // s0 = argc * 8
  masm.addPtr(reg_argv, s0);     // s0 = argv + argc * 8

  // Loop over arguments, copying them from an unknown buffer onto the Ion
  // stack so they can be accessed from JIT'ed code.
  Label header, footer;
  // If there aren't any arguments, don't do anything
  masm.ma_b(s0, reg_argv, &footer, Assembler::BelowOrEqual, ShortJump);
  {
    masm.bind(&header);

    masm.subPtr(Imm32(2 * sizeof(uintptr_t)), s0);
    masm.subPtr(Imm32(2 * sizeof(uintptr_t)), StackPointer);

    ValueOperand value = ValueOperand(s6, s7);
    masm.loadValue(Address(s0, 0), value);
    masm.storeValue(value, Address(StackPointer, 0));

    masm.ma_b(s0, reg_argv, &header, Assembler::Above, ShortJump);
  }
  masm.bind(&footer);

  // Create the frame descriptor.
  masm.subPtr(StackPointer, s4);
  masm.makeFrameDescriptor(s4, FrameType::CppToJSJit, JitFrameLayout::Size());

  masm.subPtr(Imm32(2 * sizeof(uintptr_t)), StackPointer);
  masm.storePtr(s3,
                Address(StackPointer, sizeof(uintptr_t)));  // actual arguments
  masm.storePtr(s2, Address(StackPointer, 0));              // callee token

  masm.push(s4);  // descriptor

  CodeLabel returnLabel;
  Label oomReturnLabel;
  {
    // Handle Interpreter -> Baseline OSR.
    AllocatableGeneralRegisterSet regs(GeneralRegisterSet::All());
    MOZ_ASSERT(!regs.has(FramePointer));
    regs.take(OsrFrameReg);
    regs.take(reg_code);
    regs.take(ReturnReg);

    const Address slotNumStackValues(
        FramePointer,
        sizeof(EnterJITRegs) + offsetof(EnterJITArgs, numStackValues));
    const Address slotScopeChain(
        FramePointer,
        sizeof(EnterJITRegs) + offsetof(EnterJITArgs, scopeChain));

    Label notOsr;
    masm.ma_b(OsrFrameReg, OsrFrameReg, &notOsr, Assembler::Zero, ShortJump);

    Register scratch = regs.takeAny();

    Register numStackValues = regs.takeAny();
    masm.load32(slotNumStackValues, numStackValues);

    // Push return address.
    masm.subPtr(Imm32(sizeof(uintptr_t)), StackPointer);
    masm.ma_li(scratch, &returnLabel);
    masm.storePtr(scratch, Address(StackPointer, 0));

    // Push previous frame pointer.
    masm.subPtr(Imm32(sizeof(uintptr_t)), StackPointer);
    masm.storePtr(FramePointer, Address(StackPointer, 0));

    // Reserve frame.
    Register framePtr = FramePointer;
    masm.subPtr(Imm32(BaselineFrame::Size()), StackPointer);
    masm.movePtr(StackPointer, framePtr);

    // Reserve space for locals and stack values.
    masm.ma_sll(scratch, numStackValues, Imm32(3));
    masm.subPtr(scratch, StackPointer);

    // Enter exit frame.
    masm.addPtr(
        Imm32(BaselineFrame::Size() + BaselineFrame::FramePointerOffset),
        scratch);
    masm.makeFrameDescriptor(scratch, FrameType::BaselineJS,
                             ExitFrameLayout::Size());

    // Push frame descriptor and fake return address.
    masm.reserveStack(2 * sizeof(uintptr_t));
    masm.storePtr(
        scratch, Address(StackPointer, sizeof(uintptr_t)));  // Frame descriptor
    masm.storePtr(zero, Address(StackPointer, 0));  // fake return address

    // No GC things to mark, push a bare token.
    masm.loadJSContext(scratch);
    masm.enterFakeExitFrame(scratch, scratch, ExitFrameType::Bare);

    masm.reserveStack(2 * sizeof(uintptr_t));
    masm.storePtr(framePtr,
                  Address(StackPointer, sizeof(uintptr_t)));  // BaselineFrame
    masm.storePtr(reg_code, Address(StackPointer, 0));        // jitcode

    using Fn = bool (*)(BaselineFrame * frame, InterpreterFrame * interpFrame,
                        uint32_t numStackValues);
    masm.setupUnalignedABICall(scratch);
    masm.passABIArg(FramePointer);  // BaselineFrame
    masm.passABIArg(OsrFrameReg);   // InterpreterFrame
    masm.passABIArg(numStackValues);
    masm.callWithABI<Fn, jit::InitBaselineFrameForOsr>(
        MoveOp::GENERAL, CheckUnsafeCallWithABI::DontCheckHasExitFrame);

    regs.add(OsrFrameReg);
    regs.take(JSReturnOperand);
    Register jitcode = regs.takeAny();
    masm.loadPtr(Address(StackPointer, 0), jitcode);
    masm.loadPtr(Address(StackPointer, sizeof(uintptr_t)), framePtr);
    masm.freeStack(2 * sizeof(uintptr_t));

    Label error;
    masm.freeStack(ExitFrameLayout::SizeWithFooter());
    masm.addPtr(Imm32(BaselineFrame::Size()), framePtr);
    masm.branchIfFalseBool(ReturnReg, &error);

    // If OSR-ing, then emit instrumentation for setting lastProfilerFrame
    // if profiler instrumentation is enabled.
    {
      Label skipProfilingInstrumentation;
      Register realFramePtr = numStackValues;
      AbsoluteAddress addressOfEnabled(
          cx->runtime()->geckoProfiler().addressOfEnabled());
      masm.branch32(Assembler::Equal, addressOfEnabled, Imm32(0),
                    &skipProfilingInstrumentation);
      masm.ma_addu(realFramePtr, framePtr, Imm32(sizeof(void*)));
      masm.profilerEnterFrame(realFramePtr, scratch);
      masm.bind(&skipProfilingInstrumentation);
    }

    masm.jump(jitcode);

    // OOM: load error value, discard return address and previous frame
    // pointer and return.
    masm.bind(&error);
    masm.movePtr(framePtr, StackPointer);
    masm.addPtr(Imm32(2 * sizeof(uintptr_t)), StackPointer);
    masm.moveValue(MagicValue(JS_ION_ERROR), JSReturnOperand);
    masm.jump(&oomReturnLabel);

    masm.bind(&notOsr);
    // Load the scope chain in R1.
    MOZ_ASSERT(R1.scratchReg() != reg_code);
    masm.loadPtr(slotScopeChain, R1.scratchReg());
  }

  // The call will push the return address on the stack, thus we check that
  // the stack would be aligned once the call is complete.
  masm.assertStackAlignment(JitStackAlignment, sizeof(uintptr_t));

  // Call the function with pushing return address to stack.
  masm.callJitNoProfiler(reg_code);

  {
    // Interpreter -> Baseline OSR will return here.
    masm.bind(&returnLabel);
    masm.addCodeLabel(returnLabel);
    masm.bind(&oomReturnLabel);
  }

  // s0 <- 8*argc (size of all arguments we pushed on the stack)
  masm.pop(s0);
  masm.rshiftPtr(Imm32(FRAMESIZE_SHIFT), s0);

  // Discard calleeToken, numActualArgs.
  masm.addPtr(Imm32(2 * sizeof(uintptr_t)), StackPointer);

  // Pop arguments off the stack.
  masm.addPtr(s0, StackPointer);

  // Store the returned value into the slotVp
  masm.loadPtr(slotVp, s1);
  masm.storeValue(JSReturnOperand, Address(s1, 0));

  // Restore non-volatile registers and return.
  GenerateReturn(masm, ShortJump);
}

// static
mozilla::Maybe<::JS::ProfilingFrameIterator::RegisterState>
JitRuntime::getCppEntryRegisters(JitFrameLayout* frameStackAddress) {
  // Not supported, or not implemented yet.
  // TODO: Implement along with the corresponding stack-walker changes, in
  // coordination with the Gecko Profiler, see bug 1635987 and follow-ups.
  return mozilla::Nothing{};
}

void JitRuntime::generateInvalidator(MacroAssembler& masm, Label* bailoutTail) {
  invalidatorOffset_ = startTrampolineCode(masm);

  // NOTE: Members ionScript_ and osiPointReturnAddress_ of
  // InvalidationBailoutStack are already on the stack.
  static const uint32_t STACK_DATA_SIZE =
      sizeof(InvalidationBailoutStack) - 2 * sizeof(uintptr_t);

  // Stack has to be alligned here. If not, we will have to fix it.
  masm.checkStackAlignment();

  // Make room for data on stack.
  masm.subPtr(Imm32(STACK_DATA_SIZE), StackPointer);

  // Save general purpose registers
  for (uint32_t i = 0; i < Registers::Total; i++) {
    Address address =
        Address(StackPointer, InvalidationBailoutStack::offsetOfRegs() +
                                  i * sizeof(uintptr_t));
    masm.storePtr(Register::FromCode(i), address);
  }

  // Save floating point registers
  // We can use as_sd because stack is alligned.
  for (uint32_t i = 0; i < FloatRegisters::TotalDouble; i++) {
    masm.as_sdc1(
        FloatRegister::FromIndex(i, FloatRegister::Double), StackPointer,
        InvalidationBailoutStack::offsetOfFpRegs() + i * sizeof(double));
  }

  // Pass pointer to InvalidationBailoutStack structure.
  masm.movePtr(StackPointer, a0);

  // Reserve place for return value and BailoutInfo pointer
  masm.subPtr(Imm32(2 * sizeof(uintptr_t)), StackPointer);
  // Pass pointer to return value.
  masm.ma_addu(a1, StackPointer, Imm32(sizeof(uintptr_t)));
  // Pass pointer to BailoutInfo
  masm.movePtr(StackPointer, a2);

  using Fn = bool (*)(InvalidationBailoutStack * sp, size_t * frameSizeOut,
                      BaselineBailoutInfo * *info);
  masm.setupAlignedABICall();
  masm.passABIArg(a0);
  masm.passABIArg(a1);
  masm.passABIArg(a2);
  masm.callWithABI<Fn, InvalidationBailout>(
      MoveOp::GENERAL, CheckUnsafeCallWithABI::DontCheckOther);

  masm.loadPtr(Address(StackPointer, 0), a2);
  masm.loadPtr(Address(StackPointer, sizeof(uintptr_t)), a1);
  // Remove the return address, the IonScript, the register state
  // (InvaliationBailoutStack) and the space that was allocated for the
  // return value.
  masm.addPtr(Imm32(sizeof(InvalidationBailoutStack) + 2 * sizeof(uintptr_t)),
              StackPointer);
  // remove the space that this frame was using before the bailout
  // (computed by InvalidationBailout)
  masm.addPtr(a1, StackPointer);

  // Jump to shared bailout tail. The BailoutInfo pointer has to be in r2.
  masm.jump(bailoutTail);
}

void JitRuntime::generateArgumentsRectifier(MacroAssembler& masm,
                                            ArgumentsRectifierKind kind) {
  switch (kind) {
    case ArgumentsRectifierKind::Normal:
      argumentsRectifierOffset_ = startTrampolineCode(masm);
      break;
    case ArgumentsRectifierKind::TrialInlining:
      trialInliningArgumentsRectifierOffset_ = startTrampolineCode(masm);
      break;
  }
  masm.pushReturnAddress();

#error "Port changes from bug 1772506"

  Register numActArgsReg = t6;
  Register calleeTokenReg = t7;
  Register numArgsReg = t5;

  // Load the number of actual arguments into numActArgsReg
  masm.loadPtr(
      Address(StackPointer, RectifierFrameLayout::offsetOfNumActualArgs()),
      numActArgsReg);

  // Load the number of |undefined|s to push into t1.
  masm.loadPtr(
      Address(StackPointer, RectifierFrameLayout::offsetOfCalleeToken()),
      calleeTokenReg);

  // Copy the number of actual arguments into s3.
  masm.mov(numActArgsReg, s3);

  masm.mov(calleeTokenReg, numArgsReg);
  masm.andPtr(Imm32(CalleeTokenMask), numArgsReg);
  masm.loadFunctionArgCount(numArgsReg, numArgsReg);

  masm.as_subu(t1, numArgsReg, s3);

  // Get the topmost argument.
  masm.ma_sll(t0, s3, Imm32(3));  // t0 <- nargs * 8
  masm.as_addu(t2, sp, t0);       // t2 <- sp + nargs * 8
  masm.addPtr(Imm32(sizeof(RectifierFrameLayout)), t2);

  {
    Label notConstructing;

    masm.branchTest32(Assembler::Zero, calleeTokenReg,
                      Imm32(CalleeToken_FunctionConstructing),
                      &notConstructing);

    // Add sizeof(Value) to overcome |this|
    masm.subPtr(Imm32(sizeof(Value)), StackPointer);
    masm.load32(Address(t2, NUNBOX32_TYPE_OFFSET + sizeof(Value)), t0);
    masm.store32(t0, Address(StackPointer, NUNBOX32_TYPE_OFFSET));
    masm.load32(Address(t2, NUNBOX32_PAYLOAD_OFFSET + sizeof(Value)), t0);
    masm.store32(t0, Address(StackPointer, NUNBOX32_PAYLOAD_OFFSET));

    // Include the newly pushed newTarget value in the frame size
    // calculated below.
    masm.add32(Imm32(1), numArgsReg);

    masm.bind(&notConstructing);
  }

  // Push undefined.
  masm.moveValue(UndefinedValue(), ValueOperand(t3, t4));
  {
    Label undefLoopTop;
    masm.bind(&undefLoopTop);

    masm.subPtr(Imm32(sizeof(Value)), StackPointer);
    masm.storeValue(ValueOperand(t3, t4), Address(StackPointer, 0));
    masm.sub32(Imm32(1), t1);

    masm.ma_b(t1, t1, &undefLoopTop, Assembler::NonZero, ShortJump);
  }

  // Push arguments, |nargs| + 1 times (to include |this|).
  {
    Label copyLoopTop, initialSkip;

    masm.ma_b(&initialSkip, ShortJump);

    masm.bind(&copyLoopTop);
    masm.subPtr(Imm32(sizeof(Value)), t2);
    masm.sub32(Imm32(1), s3);

    masm.bind(&initialSkip);

    MOZ_ASSERT(sizeof(Value) == 2 * sizeof(uint32_t));
    // Read argument and push to stack.
    masm.subPtr(Imm32(sizeof(Value)), StackPointer);
    masm.load32(Address(t2, NUNBOX32_TYPE_OFFSET), t0);
    masm.store32(t0, Address(StackPointer, NUNBOX32_TYPE_OFFSET));
    masm.load32(Address(t2, NUNBOX32_PAYLOAD_OFFSET), t0);
    masm.store32(t0, Address(StackPointer, NUNBOX32_PAYLOAD_OFFSET));

    masm.ma_b(s3, s3, &copyLoopTop, Assembler::NonZero, ShortJump);
  }

  // translate the framesize from values into bytes
  masm.ma_addu(t0, numArgsReg, Imm32(1));
  masm.lshiftPtr(Imm32(3), t0);

  // Construct sizeDescriptor.
  masm.makeFrameDescriptor(t0, FrameType::Rectifier, JitFrameLayout::Size());

  // Construct JitFrameLayout.
  masm.subPtr(Imm32(3 * sizeof(uintptr_t)), StackPointer);
  // Push actual arguments.
  masm.storePtr(numActArgsReg, Address(StackPointer, 2 * sizeof(uintptr_t)));
  // Push callee token.
  masm.storePtr(calleeTokenReg, Address(StackPointer, sizeof(uintptr_t)));
  // Push frame descriptor.
  masm.storePtr(t0, Address(StackPointer, 0));

  // Call the target function.
  masm.andPtr(Imm32(CalleeTokenMask), calleeTokenReg);
  switch (kind) {
    case ArgumentsRectifierKind::Normal:
      masm.loadJitCodeRaw(calleeTokenReg, t1);
      argumentsRectifierReturnOffset_ = masm.callJitNoProfiler(t1);
      break;
    case ArgumentsRectifierKind::TrialInlining:
      Label noBaselineScript, done;
      masm.loadBaselineJitCodeRaw(calleeTokenReg, t1, &noBaselineScript);
      masm.callJitNoProfiler(t1);
      masm.jump(&done);

      // See BaselineCacheIRCompiler::emitCallInlinedFunction.
      masm.bind(&noBaselineScript);
      masm.loadJitCodeRaw(calleeTokenReg, t1);
      masm.callJitNoProfiler(t1);
      masm.bind(&done);
      break;
  }

  masm.mov(FramePointer, StackPointer);
  masm.pop(FramePointer);
  masm.ret();
}

// NOTE: Members snapshotOffset_ and padding_ of BailoutStack
// are not stored in PushBailoutFrame().
static const uint32_t bailoutDataSize =
    sizeof(BailoutStack) - 2 * sizeof(uintptr_t);
static const uint32_t bailoutInfoOutParamSize = 2 * sizeof(uintptr_t);

/* There are two different stack layouts when doing bailout. They are
 * represented via class BailoutStack.
 *
 * - First case is when bailout is done trough bailout table. In this case
 * table offset is stored in $ra (look at JitRuntime::generateBailoutTable())
 * and thunk code should save it on stack. In this case frameClassId_ cannot
 * be NO_FRAME_SIZE_CLASS_ID. Members snapshotOffset_ and padding_ are not on
 * the stack.
 *
 * - Other case is when bailout is done via out of line code (lazy bailout).
 * In this case frame size is stored in $ra (look at
 * CodeGeneratorMIPS::generateOutOfLineCode()) and thunk code should save it
 * on stack. Other difference is that members snapshotOffset_ and padding_ are
 * pushed to the stack by CodeGeneratorMIPS::visitOutOfLineBailout().
 */
static void PushBailoutFrame(MacroAssembler& masm, Register spArg) {
  // Make sure that alignment is proper.
  masm.checkStackAlignment();

  // Make room for data.
  masm.subPtr(Imm32(bailoutDataSize), StackPointer);

  // Save general purpose registers.
  for (uint32_t i = 0; i < Registers::Total; i++) {
    uint32_t off = BailoutStack::offsetOfRegs() + i * sizeof(uintptr_t);
    masm.storePtr(Register::FromCode(i), Address(StackPointer, off));
  }

#ifdef ENABLE_WASM_SIMD
  // What to do for SIMD?
#  error "Needs more careful logic if SIMD is enabled"
#endif

  // Save floating point registers
  // We can use as_sdc1 because stack is alligned.
  for (uint32_t i = 0; i < FloatRegisters::TotalDouble; i++) {
    masm.as_sdc1(FloatRegister::FromIndex(i, FloatRegister::Double),
                 StackPointer,
                 BailoutStack::offsetOfFpRegs() + i * sizeof(double));
  }

  // Store the frameSize_ stored in ra
  // See: JitRuntime::generateBailoutTable()
  // See: CodeGeneratorMIPS::generateOutOfLineCode()
  masm.storePtr(ra, Address(StackPointer, BailoutStack::offsetOfFrameSize()));

#error "Code needs to be updated"

  // Put pointer to BailoutStack as first argument to the Bailout()
  masm.movePtr(StackPointer, spArg);
}

static void GenerateBailoutThunk(MacroAssembler& masm, Label* bailoutTail) {
  PushBailoutFrame(masm, a0);

  // Put pointer to BailoutInfo
  masm.subPtr(Imm32(bailoutInfoOutParamSize), StackPointer);
  masm.storePtr(ImmPtr(nullptr), Address(StackPointer, 0));
  masm.movePtr(StackPointer, a1);

  using Fn = bool (*)(BailoutStack * sp, BaselineBailoutInfo * *info);
  masm.setupAlignedABICall();
  masm.passABIArg(a0);
  masm.passABIArg(a1);
  masm.callWithABI<Fn, Bailout>(MoveOp::GENERAL,
                                CheckUnsafeCallWithABI::DontCheckOther);

  // Get BailoutInfo pointer
  masm.loadPtr(Address(StackPointer, 0), a2);

  // Remove both the bailout frame and the topmost Ion frame's stack.

  // Load frameSize from stack
  masm.loadPtr(Address(StackPointer, bailoutInfoOutParamSize +
                                         BailoutStack::offsetOfFrameSize()),
               a1);

  // Remove complete BailoutStack class and data after it
  masm.addPtr(Imm32(sizeof(BailoutStack) + bailoutInfoOutParamSize),
              StackPointer);
  // Remove frame size srom stack
  masm.addPtr(a1, StackPointer);

  // Jump to shared bailout tail. The BailoutInfo pointer has to be in a2.
  masm.jump(bailoutTail);
}

JitRuntime::BailoutTable JitRuntime::generateBailoutTable(MacroAssembler& masm,
                                                          Label* bailoutTail,
                                                          uint32_t frameClass) {
  uint32_t offset = startTrampolineCode(masm);

  Label bailout;
  for (size_t i = 0; i < BAILOUT_TABLE_SIZE; i++) {
    // Calculate offset to the end of table
    int32_t offset = (BAILOUT_TABLE_SIZE - i) * BAILOUT_TABLE_ENTRY_SIZE;

    // We use the 'ra' as table offset later in GenerateBailoutThunk
    masm.as_bal(BOffImm16(offset));
    masm.nop();
  }
  masm.bind(&bailout);

  GenerateBailoutThunk(masm, frameClass, bailoutTail);

  return BailoutTable(offset, masm.currentOffset() - offset);
}

void JitRuntime::generateBailoutHandler(MacroAssembler& masm,
                                        Label* bailoutTail) {
  bailoutHandlerOffset_ = startTrampolineCode(masm);

  GenerateBailoutThunk(masm, NO_FRAME_SIZE_CLASS_ID, bailoutTail);
}

bool JitRuntime::generateVMWrapper(JSContext* cx, MacroAssembler& masm,
                                   const VMFunctionData& f, DynFn nativeFun,
                                   uint32_t* wrapperOffset) {
  *wrapperOffset = startTrampolineCode(masm);

  // Avoid conflicts with argument registers while discarding the result after
  // the function call.
  AllocatableGeneralRegisterSet regs(Register::Codes::WrapperMask);

  static_assert(
      (Register::Codes::VolatileMask & ~Register::Codes::WrapperMask) == 0,
      "Wrapper register set should be a superset of Volatile register set.");

  // The context is the first argument; a0 is the first argument register.
  Register cxreg = a0;
  regs.take(cxreg);

  // If it isn't a tail call, then the return address needs to be saved
  if (f.expectTailCall == NonTailCall) {
    masm.pushReturnAddress();
  }

  // We're aligned to an exit frame, so link it up.
  masm.loadJSContext(cxreg);
  masm.enterExitFrame(cxreg, regs.getAny(), &f);

  // Save the base of the argument set stored on the stack.
  Register argsBase = InvalidReg;
  if (f.explicitArgs) {
    argsBase = t1;  // Use temporary register.
    regs.take(argsBase);
    masm.ma_addu(argsBase, StackPointer,
                 Imm32(ExitFrameLayout::SizeWithFooter()));
  }
  uint32_t framePushedBeforeAlignStack = masm.framePushed();
  masm.alignStackPointer();
  masm.setFramePushed(0);

  // Reserve space for the outparameter. Reserve sizeof(Value) for every
  // case so that stack stays aligned.
  uint32_t outParamSize = 0;
  switch (f.outParam) {
    case Type_Value:
      outParamSize = sizeof(Value);
      masm.reserveStack(outParamSize);
      break;

    case Type_Handle: {
      uint32_t pushed = masm.framePushed();
      masm.PushEmptyRooted(f.outParamRootType);
      outParamSize = masm.framePushed() - pushed;
    } break;

    case Type_Bool:
    case Type_Int32:
      MOZ_ASSERT(sizeof(uintptr_t) == sizeof(uint32_t));
      [[fallthrough]];
    case Type_Pointer:
      outParamSize = sizeof(uintptr_t);
      masm.reserveStack(outParamSize);
      break;

    case Type_Double:
      outParamSize = sizeof(double);
      masm.reserveStack(outParamSize);
      break;
    default:
      MOZ_ASSERT(f.outParam == Type_Void);
      break;
  }

  uint32_t outParamOffset = 0;
  if (f.outParam != Type_Void) {
    // Make sure that stack is double aligned after outParam.
    MOZ_ASSERT(outParamSize <= sizeof(double));
    outParamOffset += sizeof(double) - outParamSize;
  }
  // Reserve stack for double sized args that are copied to be aligned.
  outParamOffset += f.doubleByRefArgs() * sizeof(double);

  Register doubleArgs = t0;
  masm.reserveStack(outParamOffset);
  masm.movePtr(StackPointer, doubleArgs);

  masm.setupAlignedABICall();
  masm.passABIArg(cxreg);

  size_t argDisp = 0;
  size_t doubleArgDisp = 0;

  // Copy any arguments.
  for (uint32_t explicitArg = 0; explicitArg < f.explicitArgs; explicitArg++) {
    switch (f.argProperties(explicitArg)) {
      case VMFunctionData::WordByValue:
        masm.passABIArg(MoveOperand(argsBase, argDisp), MoveOp::GENERAL);
        argDisp += sizeof(uint32_t);
        break;
      case VMFunctionData::DoubleByValue:
        // Values should be passed by reference, not by value, so we
        // assert that the argument is a double-precision float.
        MOZ_ASSERT(f.argPassedInFloatReg(explicitArg));
        masm.passABIArg(MoveOperand(argsBase, argDisp), MoveOp::DOUBLE);
        argDisp += sizeof(double);
        break;
      case VMFunctionData::WordByRef:
        masm.passABIArg(
            MoveOperand(argsBase, argDisp, MoveOperand::Kind::EffectiveAddress),
            MoveOp::GENERAL);
        argDisp += sizeof(uint32_t);
        break;
      case VMFunctionData::DoubleByRef:
        // Copy double sized argument to aligned place.
        masm.ma_ldc1WordAligned(ScratchDoubleReg, argsBase, argDisp);
        masm.as_sdc1(ScratchDoubleReg, doubleArgs, doubleArgDisp);
        masm.passABIArg(MoveOperand(doubleArgs, doubleArgDisp,
                                    MoveOperand::Kind::EffectiveAddress),
                        MoveOp::GENERAL);
        doubleArgDisp += sizeof(double);
        argDisp += sizeof(double);
        break;
    }
  }

  MOZ_ASSERT_IF(f.outParam != Type_Void, doubleArgDisp + sizeof(double) ==
                                             outParamOffset + outParamSize);

  // Copy the implicit outparam, if any.
  if (f.outParam != Type_Void) {
    masm.passABIArg(MoveOperand(doubleArgs, outParamOffset,
                                MoveOperand::Kind::EffectiveAddress),
                    MoveOp::GENERAL);
  }

  masm.callWithABI(nativeFun, MoveOp::GENERAL,
                   CheckUnsafeCallWithABI::DontCheckHasExitFrame);

  // Test for failure.
  switch (f.failType()) {
    case Type_Cell:
      masm.branchTestPtr(Assembler::Zero, v0, v0, masm.failureLabel());
      break;
    case Type_Bool:
      // Called functions return bools, which are 0/false and non-zero/true
      masm.branchIfFalseBool(v0, masm.failureLabel());
      break;
    case Type_Void:
      break;
    default:
      MOZ_CRASH("unknown failure kind");
  }

  masm.freeStack(outParamOffset);

  // Load the outparam and free any allocated stack.
  switch (f.outParam) {
    case Type_Handle:
      masm.popRooted(f.outParamRootType, ReturnReg, JSReturnOperand);
      break;

    case Type_Value:
      masm.loadValue(Address(StackPointer, 0), JSReturnOperand);
      masm.freeStack(sizeof(Value));
      break;

    case Type_Int32:
      MOZ_ASSERT(sizeof(uintptr_t) == sizeof(uint32_t));
      [[fallthrough]];
    case Type_Pointer:
      masm.load32(Address(StackPointer, 0), ReturnReg);
      masm.freeStack(sizeof(uintptr_t));
      break;

    case Type_Bool:
      masm.load8ZeroExtend(Address(StackPointer, 0), ReturnReg);
      masm.freeStack(sizeof(uintptr_t));
      break;

    case Type_Double:
      masm.as_ldc1(ReturnDoubleReg, StackPointer, 0);
      masm.freeStack(sizeof(double));
      break;

    default:
      MOZ_ASSERT(f.outParam == Type_Void);
      break;
  }

  masm.restoreStackPointer();
  masm.setFramePushed(framePushedBeforeAlignStack);

  masm.leaveExitFrame();
  masm.retn(Imm32(sizeof(ExitFrameLayout) +
                  f.explicitStackSlots() * sizeof(uintptr_t) +
                  f.extraValuesToPop * sizeof(Value)));

  return true;
}

uint32_t JitRuntime::generatePreBarrier(JSContext* cx, MacroAssembler& masm,
                                        MIRType type) {
  uint32_t offset = startTrampolineCode(masm);

  MOZ_ASSERT(PreBarrierReg == a1);
  Register temp1 = a0;
  Register temp2 = a2;
  Register temp3 = a3;
  masm.push(temp1);
  masm.push(temp2);
  masm.push(temp3);

  Label noBarrier;
  masm.emitPreBarrierFastPath(cx->runtime(), type, temp1, temp2, temp3,
                              &noBarrier);

  // Call into C++ to mark this GC thing.
  masm.pop(temp3);
  masm.pop(temp2);
  masm.pop(temp1);

  LiveRegisterSet save;
  save.set() = RegisterSet(GeneralRegisterSet(Registers::VolatileMask),
                           FloatRegisterSet(FloatRegisters::VolatileMask));
  save.add(ra);
  masm.PushRegsInMask(save);

  masm.movePtr(ImmPtr(cx->runtime()), a0);

  masm.setupUnalignedABICall(a2);
  masm.passABIArg(a0);
  masm.passABIArg(a1);
  masm.callWithABI(JitPreWriteBarrier(type));

  save.take(AnyRegister(ra));
  masm.PopRegsInMask(save);
  masm.ret();

  masm.bind(&noBarrier);
  masm.pop(temp3);
  masm.pop(temp2);
  masm.pop(temp1);
  masm.abiret();

  return offset;
}

void JitRuntime::generateExceptionTailStub(MacroAssembler& masm,
                                           Label* profilerExitTail) {
  exceptionTailOffset_ = startTrampolineCode(masm);

  masm.bind(masm.failureLabel());
  masm.handleFailureWithHandlerTail(profilerExitTail);
}

void JitRuntime::generateBailoutTailStub(MacroAssembler& masm,
                                         Label* bailoutTail) {
  bailoutTailOffset_ = startTrampolineCode(masm);
  masm.bind(bailoutTail);

  masm.generateBailoutTail(a1, a2);
}