Adding upstream version 110.0.1.upstream/110.0.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 316 insertions, 0 deletions

diff --git a/l10n-xh/mail/installer/custom.properties b/l10n-xh/mail/installer/custom.properties
new file mode 100644
index 0000000000..40c8e03b64
--- /dev/null
+++ b/l10n-xh/mail/installer/custom.properties
@@ -0,0 +1,86 @@
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is the Mozilla Installer code.
+#
+# The Initial Developer of the Original Code is Mozilla Foundation
+# Portions created by the Initial Developer are Copyright (C) 2006
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#  Robert Strong <robert.bugzilla@gmail.com>
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 2 or later (the "GPL"), or
+# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+# LOCALIZATION NOTE:
+
+# This file must be saved as UTF8
+
+# Accesskeys are defined by prefixing the letter that is to be used for the
+# accesskey with an ampersand (e.g. &).
+
+# Don't replace ${BrandShortName}, $(^Name), or $(^NameDA) with a custom string.
+
+# Do not replace $BrandShortName, $BrandFullName, or $BrandFullNameDA with a
+# custom string and always use the same one as used by the en-US files.
+# $BrandFullNameDA allows the string to contain an ampersand (e.g. DA stands
+# for double ampersand) and prevents the letter following the ampersand from
+# being used as an accesskey.
+
+# You can use \n to create a newline in the string but only when the string
+# from en-US contains a \n.
+
+OPTIONS_PAGE_TITLE=Setup Type
+OPTIONS_PAGE_SUBTITLE=Choose setup options
+SHORTCUTS_PAGE_TITLE=Set Up Shortcuts
+SHORTCUTS_PAGE_SUBTITLE=Create Program Icons
+SURVEY_TEXT=&Tell us what you thought of ${BrandShortName}
+LAUNCH_TEXT=&Launch $(^Name) now
+CREATE_ICONS_DESC=Create icons for ${BrandShortName}:
+ICONS_DESKTOP=On my &Desktop
+ICONS_STARTMENU=In my &Start Menu Programs folder
+ICONS_QUICKLAUNCH=In my &Quick Launch bar
+WARN_WRITE_ACCESS=You don't have access to write to the installation directory.\n\nClick OK to select a different directory.
+WARN_DISK_SPACE=You don't have sufficient disk space to install to this location.\n\nClick OK to select a different location.
+
+STATUS_INSTALL_APP=Installing ${BrandShortName}...
+STATUS_INSTALL_LANG=Installing Language Files (${AB_CD})...
+STATUS_UNINSTALL_MAIN=Uninstalling ${BrandShortName}...
+STATUS_CLEANUP=Cleaning up the birdcage...
+
+# _DESC strings support approximately 65 characters per line.
+# One line
+OPTIONS_SUMMARY=Choose the type of setup you prefer, then click Next.
+# One line
+OPTION_STANDARD_DESC=${BrandShortName} will be installed with the most common options.
+OPTION_STANDARD_RADIO=&Standard
+# Two lines
+OPTION_CUSTOM_DESC=You may choose individual options to be installed. Recommended for experienced users.
+OPTION_CUSTOM_RADIO=&Custom
+
diff --git a/l10n-xh/mail/installer/mui.properties b/l10n-xh/mail/installer/mui.properties
new file mode 100644
index 0000000000..da5e26cdab
--- /dev/null
+++ b/l10n-xh/mail/installer/mui.properties
@@ -0,0 +1,102 @@
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is the Mozilla Installer code.
+#
+# The Initial Developer of the Original Code is Mozilla Foundation
+# Portions created by the Initial Developer are Copyright (C) 2006
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#  Robert Strong <robert.bugzilla@gmail.com>
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 2 or later (the "GPL"), or
+# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+# To make the l10n tinderboxen see changes to this file you can change a value
+# name by adding - to the end of the name followed by chars (e.g. Branding-2).
+
+# LOCALIZATION NOTE:
+
+# This file must be saved as UTF8
+
+# Accesskeys are defined by prefixing the letter that is to be used for the
+# accesskey with an ampersand (e.g. &).
+
+# Do not replace $(^NameDA) or $(^Name) with a custom string.
+
+# Do not change $(^NameDA) to $(^Name) or $(^Name) to $(^NameDA). NameDA allows
+# Name to contain an ampersand (e.g. DA stands for double ampersand) and
+# prevents the letter following the ampersand being used as an accesskey.
+
+# Do not replace $BrandShortName, $BrandFullName, or $BrandFullNameDA with a
+# custom string and always use the same one as used by the en-US files.
+# $BrandFullNameDA allows the string to contain an ampersand (e.g. DA stands
+# for double ampersand) and prevents the letter following the ampersand from
+# being used as an accesskey.
+
+# You can use \n to create a newline in the string but only when the string
+# from en-US contains a \n.
+MUI_TEXT_WELCOME_INFO_TITLE=Welcome to the $(^NameDA) Setup Wizard
+MUI_TEXT_WELCOME_INFO_TEXT=This wizard will guide you through the installation of $(^NameDA).\n\nIt is recommended that you close all other applications before starting Setup. This will make it possible to update relevant system files without having to reboot your computer.\n\n$_CLICK
+MUI_TEXT_COMPONENTS_TITLE=Choose Components
+MUI_TEXT_COMPONENTS_SUBTITLE=Choose which features of $(^NameDA) you want to install.
+MUI_INNERTEXT_COMPONENTS_DESCRIPTION_TITLE=Description
+MUI_INNERTEXT_COMPONENTS_DESCRIPTION_INFO=Position your mouse over a component to see its description.
+MUI_TEXT_DIRECTORY_TITLE=Choose Install Location
+MUI_TEXT_DIRECTORY_SUBTITLE=Choose the folder in which to install $(^NameDA).
+MUI_TEXT_INSTALLING_TITLE=Installing
+MUI_TEXT_INSTALLING_SUBTITLE=Please wait while $(^NameDA) is being installed.
+MUI_TEXT_FINISH_TITLE=Installation Complete
+MUI_TEXT_FINISH_SUBTITLE=Setup was completed successfully.
+MUI_TEXT_ABORT_TITLE=Installation Aborted
+MUI_TEXT_ABORT_SUBTITLE=Setup was not completed successfully.
+MUI_BUTTONTEXT_FINISH=&Finish
+MUI_TEXT_FINISH_INFO_TITLE=Completing the $(^NameDA) Setup Wizard
+MUI_TEXT_FINISH_INFO_TEXT=$(^NameDA) has been installed on your computer.\n\nClick Finish to close this wizard.
+MUI_TEXT_FINISH_INFO_REBOOT=Your computer must be restarted in order to complete the installation of $(^NameDA). Do you want to reboot now?
+MUI_TEXT_FINISH_REBOOTNOW=Reboot now
+MUI_TEXT_FINISH_REBOOTLATER=I want to manually reboot later
+MUI_TEXT_STARTMENU_TITLE=Choose Start Menu Folder
+MUI_TEXT_STARTMENU_SUBTITLE=Choose a Start Menu folder for the $(^NameDA) shortcuts.
+MUI_INNERTEXT_STARTMENU_TOP=Select the Start Menu folder in which you would like to create the program's shortcuts. You can also enter a name to create a new folder.
+MUI_TEXT_ABORTWARNING=Are you sure you want to quit $(^Name) Setup?
+MUI_UNTEXT_WELCOME_INFO_TITLE=Welcome to the $(^NameDA) Uninstall Wizard
+MUI_UNTEXT_WELCOME_INFO_TEXT=This wizard will guide you through the uninstallation of $(^NameDA).\n\nBefore starting the uninstallation, make sure $(^NameDA) is not running.\n\n$_CLICK
+MUI_UNTEXT_CONFIRM_TITLE=Uninstall $(^NameDA)
+MUI_UNTEXT_CONFIRM_SUBTITLE=Remove $(^NameDA) from your computer.
+MUI_UNTEXT_UNINSTALLING_TITLE=Uninstalling
+MUI_UNTEXT_UNINSTALLING_SUBTITLE=Please wait while $(^NameDA) is being uninstalled.
+MUI_UNTEXT_FINISH_TITLE=Uninstallation Complete
+MUI_UNTEXT_FINISH_SUBTITLE=Uninstall was completed successfully.
+MUI_UNTEXT_ABORT_TITLE=Uninstallation Aborted
+MUI_UNTEXT_ABORT_SUBTITLE=Uninstall was not completed successfully.
+MUI_UNTEXT_FINISH_INFO_TITLE=Completing the $(^NameDA) Uninstall Wizard
+MUI_UNTEXT_FINISH_INFO_TEXT=$(^NameDA) has been uninstalled from your computer.\n\nClick Finish to close this wizard.
+MUI_UNTEXT_FINISH_INFO_REBOOT=Your computer must be restarted in order to complete the uninstallation of $(^NameDA). Do you want to reboot now?
+MUI_UNTEXT_ABORTWARNING=Are you sure you want to quit $(^Name) Uninstall?
diff --git a/l10n-xh/mail/installer/override.properties b/l10n-xh/mail/installer/override.properties
new file mode 100644
index 0000000000..161e3e4053
--- /dev/null
+++ b/l10n-xh/mail/installer/override.properties
@@ -0,0 +1,128 @@
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is the Mozilla Installer code.
+#
+# The Initial Developer of the Original Code is Mozilla Foundation
+# Portions created by the Initial Developer are Copyright (C) 2006
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#  Robert Strong <robert.bugzilla@gmail.com>
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either the GNU General Public License Version 2 or later (the "GPL"), or
+# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+# LOCALIZATION NOTE:
+
+# This file must be saved as UTF8
+
+# Accesskeys are defined by prefixing the letter that is to be used for the
+# accesskey with an ampersand (e.g. &).
+
+# Do not replace $(^NameDA) or $(^Name) with a custom string.
+
+# Do not change $(^NameDA) to $(^Name) or $(^Name) to $(^NameDA). NameDA allows
+# Name to contain an ampersand (e.g. DA stands for double ampersand) and
+# prevents the letter following the ampersand being used as an accesskey.
+
+# Do not replace $BrandShortName, $BrandFullName, or $BrandFullNameDA with a
+# custom string and always use the same one as used by the en-US files.
+# $BrandFullNameDA allows the string to contain an ampersand (e.g. DA stands
+# for double ampersand) and prevents the letter following the ampersand from
+# being used as an accesskey.
+
+# You can use \n to create a newline in the string but only when the string
+# from en-US contains a \n.
+
+# Strings that require a space at the end should be enclosed with double
+# quotes and the double quotes will be removed. To add quotes to the beginning
+# and end of a string enclose the strin with an additional double quote
+# (e.g. ""This will include quotes"").
+
+SetupCaption=$(^Name) Setup
+UninstallCaption=$(^Name) Uninstall
+BackBtn=< &Back
+NextBtn=&Next >
+AcceptBtn=I &accept the terms in the License Agreement
+DontAcceptBtn=I &do not accept the terms in the License Agreement
+InstallBtn=&Install
+UninstallBtn=&Uninstall
+CancelBtn=Cancel
+CloseBtn=&Close
+BrowseBtn=B&rowse...
+ShowDetailsBtn=Show &details
+ClickNext=Click Next to continue.
+ClickInstall=Click Install to start the installation.
+ClickUninstall=Click Uninstall to start the uninstallation.
+Completed=Completed
+LicenseTextRB=Please review the license agreement before installing $(^NameDA). If you accept all terms of the agreement, select the first option below. $_CLICK
+ComponentsText=Check the components you want to install and uncheck the components you don't want to install. $_CLICK
+ComponentsSubText2_NoInstTypes=Select components to install:
+DirText=Setup will install $(^NameDA) in the following folder. To install in a different folder, click Browse and select another folder. $_CLICK
+DirSubText=Destination Folder
+DirBrowseText=Select the folder to install $(^NameDA) in:
+SpaceAvailable="Space available: "
+SpaceRequired="Space required: "
+UninstallingText=$(^NameDA) will be uninstalled from the following folder. $_CLICK
+UninstallingSubText=Uninstalling from:
+FileError=Error opening file for writing: \r\n\r\n$0\r\n\r\nClick Abort to stop the installation,\r\nRetry to try again, or\r\nIgnore to skip this file.
+FileError_NoIgnore=Error opening file for writing: \r\n\r\n$0\r\n\r\nClick Retry to try again, or\r\nCancel to stop the installation.
+CantWrite="Can't write: "
+CopyFailed=Copy failed
+CopyTo="Copy to "
+Registering="Registering: "
+Unregistering="Unregistering: "
+SymbolNotFound="Could not find symbol: "
+CouldNotLoad="Could not load: "
+CreateFolder="Create folder: "
+CreateShortcut="Create shortcut: "
+CreatedUninstaller="Created uninstaller: "
+Delete="Delete file: "
+DeleteOnReboot="Delete on reboot: "
+ErrorCreatingShortcut="Error creating shortcut: "
+ErrorCreating="Error creating: "
+ErrorDecompressing=Error decompressing data! Corrupted installer?
+ErrorRegistering=Error registering DLL
+ExecShell="ExecShell: "
+Exec="Execute: "
+Extract="Extract: "
+ErrorWriting="Extract: error writing to file "
+InvalidOpcode=Installer corrupted: invalid opcode
+NoOLE="No OLE for: "
+OutputFolder="Output folder: "
+RemoveFolder="Remove folder: "
+RenameOnReboot="Rename on reboot: "
+Rename="Rename: "
+Skipped="Skipped: "
+CopyDetails=Copy Details To Clipboard
+LogInstall=Log install process
+Byte=B
+Kilo=K
+Mega=M
+Giga=G