Adding upstream version 110.0.1.upstream/110.0.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

12 files changed, 959 insertions, 0 deletions

diff --git a/testing/web-platform/tests/tools/wptserve/docs/Makefile b/testing/web-platform/tests/tools/wptserve/docs/Makefile
new file mode 100644
index 0000000000..250b6c8647
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/Makefile
@@ -0,0 +1,153 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = _build
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+	-rm -rf $(BUILDDIR)/*
+
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/wptserve.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/wptserve.qhc"
+
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/wptserve"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/wptserve"
+	@echo "# devhelp"
+
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."
diff --git a/testing/web-platform/tests/tools/wptserve/docs/conf.py b/testing/web-platform/tests/tools/wptserve/docs/conf.py
new file mode 100644
index 0000000000..686eb4fc24
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/conf.py
@@ -0,0 +1,242 @@
+#
+# wptserve documentation build configuration file, created by
+# sphinx-quickstart on Wed Aug 14 17:23:24 2013.
+#
+# This file is execfile()d with the current directory set to its containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys, os
+sys.path.insert(0, os.path.abspath(".."))
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration -----------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be extensions
+# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
+extensions = ['sphinx.ext.autodoc', 'sphinx.ext.viewcode']
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+#source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = 'wptserve'
+copyright = '2013, Mozilla Foundation and other wptserve contributers'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = '0.1'
+# The full version, including alpha/beta/rc tags.
+release = '0.1'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+#today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ['_build']
+
+# The reST default role (used for this markup: `text`) to use for all documents.
+#default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+#modindex_common_prefix = []
+
+
+# -- Options for HTML output ---------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+html_theme = 'default'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+#html_theme_path = []
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+#html_title = None
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+#html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+#html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#html_additional_pages = {}
+
+# If false, no module index is generated.
+#html_domain_indices = True
+
+# If false, no index is generated.
+#html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+#html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+#html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'wptservedoc'
+
+
+# -- Options for LaTeX output --------------------------------------------------
+
+latex_elements = {
+# The paper size ('letterpaper' or 'a4paper').
+#'papersize': 'letterpaper',
+
+# The font size ('10pt', '11pt' or '12pt').
+#'pointsize': '10pt',
+
+# Additional stuff for the LaTeX preamble.
+#'preamble': '',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title, author, documentclass [howto/manual]).
+latex_documents = [
+  ('index', 'wptserve.tex', 'wptserve Documentation',
+   'James Graham', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#latex_use_parts = False
+
+# If true, show page references after internal links.
+#latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+#latex_appendices = []
+
+# If false, no module index is generated.
+#latex_domain_indices = True
+
+
+# -- Options for manual page output --------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    ('index', 'wptserve', 'wptserve Documentation',
+     ['James Graham'], 1)
+]
+
+# If true, show URL addresses after external links.
+#man_show_urls = False
+
+
+# -- Options for Texinfo output ------------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+  ('index', 'wptserve', 'wptserve Documentation',
+   'James Graham', 'wptserve', 'One line description of project.',
+   'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+#texinfo_appendices = []
+
+# If false, no module index is generated.
+#texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#texinfo_show_urls = 'footnote'
diff --git a/testing/web-platform/tests/tools/wptserve/docs/handlers.rst b/testing/web-platform/tests/tools/wptserve/docs/handlers.rst
new file mode 100644
index 0000000000..8ecc933288
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/handlers.rst
@@ -0,0 +1,108 @@
+Handlers
+========
+
+Handlers are functions that have the general signature::
+
+  handler(request, response)
+
+It is expected that the handler will use information from
+the request (e.g. the path) either to populate the response
+object with the data to send, or to directly write to the
+output stream via the ResponseWriter instance associated with
+the request. If a handler writes to the output stream then the
+server will not attempt additional writes, i.e. the choice to write
+directly in the handler or not is all-or-nothing.
+
+A number of general-purpose handler functions are provided by default:
+
+.. _handlers.Python:
+
+Python Handlers
+---------------
+
+Python handlers are functions which provide a higher-level API over
+manually updating the response object, by causing the return value of
+the function to provide (part of) the response. There are four
+possible sets of values that may be returned::
+
+
+  ((status_code, reason), headers, content)
+  (status_code, headers, content)
+  (headers, content)
+  content
+
+Here `status_code` is an integer status code, `headers` is a list of (field
+name, value) pairs, and `content` is a string or an iterable returning strings.
+Such a function may also update the response manually. For example one may use
+`response.headers.set` to set a response header, and only return the content.
+One may even use this kind of handler, but manipulate the output socket
+directly, in which case the return value of the function, and the properties of
+the response object, will be ignored.
+
+The most common way to make a user function into a python handler is
+to use the provided `wptserve.handlers.handler` decorator::
+
+  from wptserve.handlers import handler
+
+  @handler
+  def test(request, response):
+      return [("X-Test": "PASS"), ("Content-Type", "text/plain")], "test"
+
+  #Later, assuming we have a Router object called 'router'
+
+  router.register("GET", "/test", test)
+
+JSON Handlers
+-------------
+
+This is a specialisation of the python handler type specifically
+designed to facilitate providing JSON responses. The API is largely
+the same as for a normal python handler, but the `content` part of the
+return value is JSON encoded, and a default Content-Type header of
+`application/json` is added. Again this handler is usually used as a
+decorator::
+
+  from wptserve.handlers import json_handler
+
+  @json_handler
+  def test(request, response):
+      return {"test": "PASS"}
+
+Python File Handlers
+--------------------
+
+Python file handlers are Python files which the server executes in response to
+requests made to the corresponding URL. This is hooked up to a route like
+``("*", "*.py", python_file_handler)``, meaning that any .py file will be
+treated as a handler file (note that this makes it easy to write unsafe
+handlers, particularly when running the server in a web-exposed setting).
+
+The Python files must define a single function `main` with the signature::
+
+  main(request, response)
+
+This function then behaves just like those described in
+:ref:`handlers.Python` above.
+
+asis Handlers
+-------------
+
+These are used to serve files as literal byte streams including the
+HTTP status line, headers and body. In the default configuration this
+handler is invoked for all files with a .asis extension.
+
+File Handlers
+-------------
+
+File handlers are used to serve static files. By default the content
+type of these files is set by examining the file extension. However
+this can be overridden, or additional headers supplied, by providing a
+file with the same name as the file being served but an additional
+.headers suffix, i.e. test.html has its headers set from
+test.html.headers. The format of the .headers file is plaintext, with
+each line containing::
+
+  Header-Name: header_value
+
+In addition headers can be set for a whole directory of files (but not
+subdirectories), using a file called `__dir__.headers`.
diff --git a/testing/web-platform/tests/tools/wptserve/docs/index.rst b/testing/web-platform/tests/tools/wptserve/docs/index.rst
new file mode 100644
index 0000000000..c6157b4f8c
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/index.rst
@@ -0,0 +1,27 @@
+.. wptserve documentation master file, created by
+   sphinx-quickstart on Wed Aug 14 17:23:24 2013.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+wptserve: Web Platform Test Server
+==================================
+
+A python-based HTTP server specifically targeted at being used for
+testing the web platform. This means that extreme flexibility —
+including the possibility of HTTP non-conformance — in the response is
+supported.
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   introduction
+   server
+   router
+   request
+   response
+   stash
+   handlers
+   pipes
+
diff --git a/testing/web-platform/tests/tools/wptserve/docs/introduction.rst b/testing/web-platform/tests/tools/wptserve/docs/introduction.rst
new file mode 100644
index 0000000000..b585a983a2
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/introduction.rst
@@ -0,0 +1,51 @@
+Introduction
+============
+
+wptserve has been designed with the specific goal of making a server
+that is suitable for writing tests for the web platform. This means
+that it cannot use common abstractions over HTTP such as WSGI, since
+these assume that the goal is to generate a well-formed HTTP
+response. Testcases, however, often require precise control of the
+exact bytes sent over the wire and their timing. The full list of
+design goals for the server are:
+
+* Suitable to run on individual test machines and over the public internet.
+
+* Support plain TCP and SSL servers.
+
+* Serve static files with the minimum of configuration.
+
+* Allow headers to be overwritten on a per-file and per-directory
+  basis.
+
+* Full customisation of headers sent (e.g. altering or omitting
+  "mandatory" headers).
+
+* Simple per-client state.
+
+* Complex logic in tests, up to precise control over the individual
+  bytes sent and the timing of sending them.
+
+Request Handling
+----------------
+
+At the high level, the design of the server is based around similar
+concepts to those found in common web frameworks like Django, Pyramid
+or Flask. In particular the lifecycle of a typical request will be
+familiar to users of these systems. Incoming requests are parsed and a
+:doc:`Request <request>` object is constructed. This object is passed
+to a :ref:`Router <router.Interface>` instance, which is
+responsible for mapping the request method and path to a handler
+function. This handler is passed two arguments; the request object and
+a :doc:`Response <response>` object. In cases where only simple
+responses are required, the handler function may fill in the
+properties of the response object and the server will take care of
+constructing the response. However each Response also contains a
+:ref:`ResponseWriter <response.Interface>` which can be
+used to directly control the TCP socket.
+
+By default there are several built-in handler functions that provide a
+higher level API than direct manipulation of the Response
+object. These are documented in :doc:`handlers`.
+
+
diff --git a/testing/web-platform/tests/tools/wptserve/docs/make.bat b/testing/web-platform/tests/tools/wptserve/docs/make.bat
new file mode 100644
index 0000000000..40c71ff5dd
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/make.bat
@@ -0,0 +1,190 @@
+@ECHO OFF
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set BUILDDIR=_build
+set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
+set I18NSPHINXOPTS=%SPHINXOPTS% .
+if NOT "%PAPER%" == "" (
+	set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
+	set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
+)
+
+if "%1" == "" goto help
+
+if "%1" == "help" (
+	:help
+	echo.Please use `make ^<target^>` where ^<target^> is one of
+	echo.  html       to make standalone HTML files
+	echo.  dirhtml    to make HTML files named index.html in directories
+	echo.  singlehtml to make a single large HTML file
+	echo.  pickle     to make pickle files
+	echo.  json       to make JSON files
+	echo.  htmlhelp   to make HTML files and a HTML help project
+	echo.  qthelp     to make HTML files and a qthelp project
+	echo.  devhelp    to make HTML files and a Devhelp project
+	echo.  epub       to make an epub
+	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter
+	echo.  text       to make text files
+	echo.  man        to make manual pages
+	echo.  texinfo    to make Texinfo files
+	echo.  gettext    to make PO message catalogs
+	echo.  changes    to make an overview over all changed/added/deprecated items
+	echo.  linkcheck  to check all external links for integrity
+	echo.  doctest    to run all doctests embedded in the documentation if enabled
+	goto end
+)
+
+if "%1" == "clean" (
+	for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
+	del /q /s %BUILDDIR%\*
+	goto end
+)
+
+if "%1" == "html" (
+	%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The HTML pages are in %BUILDDIR%/html.
+	goto end
+)
+
+if "%1" == "dirhtml" (
+	%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
+	goto end
+)
+
+if "%1" == "singlehtml" (
+	%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
+	goto end
+)
+
+if "%1" == "pickle" (
+	%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can process the pickle files.
+	goto end
+)
+
+if "%1" == "json" (
+	%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can process the JSON files.
+	goto end
+)
+
+if "%1" == "htmlhelp" (
+	%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can run HTML Help Workshop with the ^
+.hhp project file in %BUILDDIR%/htmlhelp.
+	goto end
+)
+
+if "%1" == "qthelp" (
+	%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can run "qcollectiongenerator" with the ^
+.qhcp project file in %BUILDDIR%/qthelp, like this:
+	echo.^> qcollectiongenerator %BUILDDIR%\qthelp\wptserve.qhcp
+	echo.To view the help file:
+	echo.^> assistant -collectionFile %BUILDDIR%\qthelp\wptserve.ghc
+	goto end
+)
+
+if "%1" == "devhelp" (
+	%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished.
+	goto end
+)
+
+if "%1" == "epub" (
+	%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The epub file is in %BUILDDIR%/epub.
+	goto end
+)
+
+if "%1" == "latex" (
+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
+	goto end
+)
+
+if "%1" == "text" (
+	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The text files are in %BUILDDIR%/text.
+	goto end
+)
+
+if "%1" == "man" (
+	%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The manual pages are in %BUILDDIR%/man.
+	goto end
+)
+
+if "%1" == "texinfo" (
+	%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
+	goto end
+)
+
+if "%1" == "gettext" (
+	%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
+	goto end
+)
+
+if "%1" == "changes" (
+	%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.The overview file is in %BUILDDIR%/changes.
+	goto end
+)
+
+if "%1" == "linkcheck" (
+	%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Link check complete; look for any errors in the above output ^
+or in %BUILDDIR%/linkcheck/output.txt.
+	goto end
+)
+
+if "%1" == "doctest" (
+	%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Testing of doctests in the sources finished, look at the ^
+results in %BUILDDIR%/doctest/output.txt.
+	goto end
+)
+
+:end
diff --git a/testing/web-platform/tests/tools/wptserve/docs/pipes.rst b/testing/web-platform/tests/tools/wptserve/docs/pipes.rst
new file mode 100644
index 0000000000..1edbd44867
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/pipes.rst
@@ -0,0 +1,8 @@
+Pipes
+======
+
+:mod:`Interface <wptserve.pipes>`
+---------------------------------
+
+.. automodule:: wptserve.pipes
+   :members:
diff --git a/testing/web-platform/tests/tools/wptserve/docs/request.rst b/testing/web-platform/tests/tools/wptserve/docs/request.rst
new file mode 100644
index 0000000000..ef5b8a0c08
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/request.rst
@@ -0,0 +1,10 @@
+Request
+=======
+
+Request object.
+
+:mod:`Interface <wptserve.request>`
+-----------------------------------
+
+.. automodule:: wptserve.request
+   :members:
diff --git a/testing/web-platform/tests/tools/wptserve/docs/response.rst b/testing/web-platform/tests/tools/wptserve/docs/response.rst
new file mode 100644
index 0000000000..0c2f45ce26
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/response.rst
@@ -0,0 +1,41 @@
+Response
+========
+
+Response object. This object is used to control the response that will
+be sent to the HTTP client. A handler function will take the response
+object and fill in various parts of the response. For example, a plain
+text response with the body 'Some example content' could be produced as::
+
+  def handler(request, response):
+      response.headers.set("Content-Type", "text/plain")
+      response.content = "Some example content"
+
+The response object also gives access to a ResponseWriter, which
+allows direct access to the response socket. For example, one could
+write a similar response but with more explicit control as follows::
+
+  import time
+
+  def handler(request, response):
+      response.add_required_headers = False # Don't implicitly add HTTP headers
+      response.writer.write_status(200)
+      response.writer.write_header("Content-Type", "text/plain")
+      response.writer.write_header("Content-Length", len("Some example content"))
+      response.writer.end_headers()
+      response.writer.write("Some ")
+      time.sleep(1)
+      response.writer.write("example content")
+
+Note that when writing the response directly like this it is always
+necessary to either set the Content-Length header or set
+`response.close_connection = True`. Without one of these, the client
+will not be able to determine where the response body ends and will
+continue to load indefinitely.
+
+.. _response.Interface:
+
+:mod:`Interface <wptserve.response>`
+------------------------------------
+
+.. automodule:: wptserve.response
+   :members:
diff --git a/testing/web-platform/tests/tools/wptserve/docs/router.rst b/testing/web-platform/tests/tools/wptserve/docs/router.rst
new file mode 100644
index 0000000000..986f581922
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/router.rst
@@ -0,0 +1,78 @@
+Router
+======
+
+The router is used to match incoming requests to request handler
+functions. Typically users don't interact with the router directly,
+but instead send a list of routes to register when starting the
+server. However it is also possible to add routes after starting the
+server by calling the `register` method on the server's `router`
+property.
+
+Routes are represented by a three item tuple::
+
+   (methods, path_match, handler)
+
+`methods` is either a string or a list of strings indicating the HTTP
+methods to match. In cases where all methods should match there is a
+special sentinel value `any_method` provided as a property of the
+`router` module that can be used.
+
+`path_match` is an expression that will be evaluated against the
+request path to decide if the handler should match. These expressions
+follow a custom syntax intended to make matching URLs straightforward
+and, in particular, to be easier to use than raw regexp for URL
+matching. There are three possible components of a match expression:
+
+* Literals. These match any character. The special characters \*, \{
+  and \} must be escaped by prefixing them with a \\.
+
+* Match groups. These match any character other than / and save the
+  result as a named group. They are delimited by curly braces; for
+  example::
+
+    {abc}
+
+  would create a match group with the name `abc`.
+
+* Stars. These are denoted with a `*` and match any character
+  including /. There can be at most one star
+  per pattern and it must follow any match groups.
+
+Path expressions always match the entire request path and a leading /
+in the expression is implied even if it is not explicitly
+provided. This means that `/foo` and `foo` are equivalent.
+
+For example, the following pattern matches all requests for resources with the
+extension `.py`::
+
+  *.py
+
+The following expression matches anything directly under `/resources`
+with a `.html` extension, and places the "filename" in the `name`
+group::
+
+  /resources/{name}.html
+
+The groups, including anything that matches a `*` are available in the
+request object through the `route_match` property. This is a
+dictionary mapping the group names, and any match for `*` to the
+matching part of the route. For example, given a route::
+
+  /api/{sub_api}/*
+
+and the request path `/api/test/html/test.html`, `route_match` would
+be::
+
+  {"sub_api": "html", "*": "html/test.html"}
+
+`handler` is a function taking a request and a response object that is
+responsible for constructing the response to the HTTP request. See
+:doc:`handlers` for more details on handler functions.
+
+.. _router.Interface:
+
+:mod:`Interface <wptserve.router>`
+----------------------------------
+
+.. automodule:: wptserve.router
+   :members:
diff --git a/testing/web-platform/tests/tools/wptserve/docs/server.rst b/testing/web-platform/tests/tools/wptserve/docs/server.rst
new file mode 100644
index 0000000000..5688a0a3bc
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/server.rst
@@ -0,0 +1,20 @@
+Server
+======
+
+Basic server classes and router.
+
+The following example creates a server that serves static files from
+the `files` subdirectory of the current directory and causes it to
+run on port 8080 until it is killed::
+
+  from wptserve import server, handlers
+
+  httpd = server.WebTestHttpd(port=8080, doc_root="./files/",
+                              routes=[("GET", "*", handlers.file_handler)])
+  httpd.start(block=True)
+
+:mod:`Interface <wptserve.server>`
+----------------------------------
+
+.. automodule:: wptserve.server
+   :members:
diff --git a/testing/web-platform/tests/tools/wptserve/docs/stash.rst b/testing/web-platform/tests/tools/wptserve/docs/stash.rst
new file mode 100644
index 0000000000..6510a0f59c
--- /dev/null
+++ b/testing/web-platform/tests/tools/wptserve/docs/stash.rst
@@ -0,0 +1,31 @@
+Stash
+=====
+
+Object for storing cross-request state. This is unusual in that keys
+must be UUIDs, in order to prevent different clients setting the same
+key, and values are write-once, read-once to minimize the chances of
+state persisting indefinitely. The stash defines two operations;
+`put`, to add state and `take` to remove state. Furthermore, the view
+of the stash is path-specific; by default a request will only see the
+part of the stash corresponding to its own path.
+
+A typical example of using a stash to store state might be::
+
+  @handler
+  def handler(request, response):
+      # We assume this is a string representing a UUID
+      key = request.GET.first("id")
+
+      if request.method == "POST":
+          request.server.stash.put(key, "Some sample value")
+          return "Added value to stash"
+      else:
+          value = request.server.stash.take(key)
+          assert request.server.stash.take(key) is None
+          return value
+
+:mod:`Interface <wptserve.stash>`
+---------------------------------
+
+.. automodule:: wptserve.stash
+   :members: