Adding upstream version 2.10.34.upstream/2.10.34upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1493 insertions, 0 deletions

diff --git a/docs/gimprc.5.in b/docs/gimprc.5.in
new file mode 100644
index 0000000..3b21a63
--- /dev/null
+++ b/docs/gimprc.5.in
@@ -0,0 +1,1493 @@
+.\" This man-page is auto-generated by gimp --dump-gimprc-manpage.
+
+.TH GIMPRC 5 "Version @GIMP_VERSION@" "GIMP Manual Pages"
+.SH NAME
+gimprc \- gimp configuration file
+.SH DESCRIPTION
+The
+.B gimprc
+file is a configuration file read by GIMP when it starts up.  There
+are two of these: one system-wide one stored in
+@gimpsysconfdir@/gimprc and a per-user @manpage_gimpdir@/gimprc
+which may override system settings.
+
+Comments are introduced by a hash sign (#), and continue until the end
+of the line.  Blank lines are ignored.
+
+The
+.B gimprc
+file associates values with properties.  These properties may be set
+by lisp-like assignments of the form:
+.IP
+\f3(\f2property\-name\ value\f3)\f1
+.TP
+where:
+.TP 10
+.I property\-name
+is one of the property names described below.
+.TP
+.I value
+is the value the property is to be set to.
+.PP
+
+Either spaces or tabs may be used to separate the name from the value.
+.PP
+.SH PROPERTIES
+Valid properties and their default values are:
+
+.TP
+(temp-path "${gimp_temp_dir}")
+
+Sets the folder for temporary storage. Files will appear here during the
+course of running GIMP.  Most files will disappear when GIMP exits, but some
+files are likely to remain, so it is best if this folder not be one that is
+shared by other users.  This is a single folder.
+
+.TP
+(swap-path "${gimp_cache_dir}")
+
+Sets the swap file location. GIMP uses a tile based memory allocation scheme.
+The swap file is used to quickly and easily swap tiles out to disk and back
+in. Be aware that the swap file can easily get very large if GIMP is used with
+large images. Also, things can get horribly slow if the swap file is created
+on a folder that is mounted over NFS.  For these reasons, it may be desirable
+to put your swap file in "/tmp".  This is a single folder.
+
+.TP
+(swap-compression "fast")
+
+The compression method used for tile data stored in the swap file.  This is a
+string value.
+
+.TP
+(num-processors 1)
+
+Sets how many threads GIMP should use for operations that support it.  This is
+an integer value.
+
+.TP
+(tile-cache-size 2g)
+
+When the amount of pixel data exceeds this limit, GIMP will start to swap
+tiles to disk.  This is a lot slower but it makes it possible to work on
+images that wouldn't fit into memory otherwise.  If you have a lot of RAM, you
+may want to set this to a higher value.  The integer size can contain a suffix
+of 'B', 'K', 'M' or 'G' which makes GIMP interpret the size as being specified
+in bytes, kilobytes, megabytes or gigabytes. If no suffix is specified the
+size defaults to being specified in kilobytes.
+
+.TP
+(use-opencl no)
+
+When enabled, uses OpenCL for some operations.  Possible values are yes and
+no.
+
+.TP
+
+Specifies the language to use for the user interface.  This is a string value.
+
+.TP
+(interpolation-type cubic)
+
+Sets the level of interpolation used for scaling and other transformations. 
+Possible values are none, linear, cubic, nohalo and lohalo.
+
+.TP
+(default-threshold 15)
+
+Tools such as fuzzy-select and bucket fill find regions based on a seed-fill
+algorithm.  The seed fill starts at the initially selected pixel and
+progresses in all directions until the difference of pixel intensity from the
+original is greater than a specified threshold. This value represents the
+default threshold.  This is an integer value.
+
+.TP
+(plug-in-path "${gimp_dir}/plug-ins:${gimp_plug_in_dir}/plug-ins")
+
+Sets the plug-in search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(module-path "${gimp_dir}/modules:${gimp_plug_in_dir}/modules")
+
+Sets the module search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(interpreter-path "${gimp_dir}/interpreters:${gimp_plug_in_dir}/interpreters")
+
+Sets the interpreter search path.  This is a colon-separated list of folders
+to search.
+
+.TP
+(environ-path "${gimp_dir}/environ:${gimp_plug_in_dir}/environ")
+
+Sets the environ search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(brush-path "${gimp_dir}/brushes:${gimp_data_dir}/brushes")
+
+Sets the brush search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(brush-path-writable "${gimp_dir}/brushes")
+
+This is a colon-separated list of folders to search.
+
+.TP
+(dynamics-path "${gimp_dir}/dynamics:${gimp_data_dir}/dynamics")
+
+Sets the dynamics search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(dynamics-path-writable "${gimp_dir}/dynamics")
+
+This is a colon-separated list of folders to search.
+
+.TP
+(mypaint-brush-path "@mypaint_brushes_dir@:~/.mypaint/brushes")
+
+Sets the brush search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(mypaint-brush-path-writable "~/.mypaint/brushes")
+
+This is a colon-separated list of folders to search.
+
+.TP
+(pattern-path "${gimp_dir}/patterns:${gimp_data_dir}/patterns")
+
+Sets the pattern search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(pattern-path-writable "${gimp_dir}/patterns")
+
+This is a colon-separated list of folders to search.
+
+.TP
+(palette-path "${gimp_dir}/palettes:${gimp_data_dir}/palettes")
+
+Sets the palette search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(palette-path-writable "${gimp_dir}/palettes")
+
+This is a colon-separated list of folders to search.
+
+.TP
+(gradient-path "${gimp_dir}/gradients:${gimp_data_dir}/gradients")
+
+Sets the gradient search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(gradient-path-writable "${gimp_dir}/gradients")
+
+This is a colon-separated list of folders to search.
+
+.TP
+(tool-preset-path "${gimp_dir}/tool-presets:${gimp_data_dir}/tool-presets")
+
+Sets the dynamics search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(tool-preset-path-writable "${gimp_dir}/tool-presets")
+
+This is a colon-separated list of folders to search.
+
+.TP
+(font-path "${gimp_dir}/fonts:${gimp_data_dir}/fonts")
+
+Where to look for fonts in addition to the system-wide installed fonts.  This
+is a colon-separated list of folders to search.
+
+.TP
+(default-brush "2. Hardness 050")
+
+Specify a default brush.  The brush is searched for in the specified brush
+path.  This is a string value.
+
+.TP
+(default-dynamics "Dynamics Off")
+
+Specify a default dynamics.  The dynamics is searched for in the specified
+dynamics path.  This is a string value.
+
+.TP
+(default-mypaint-brush "Fixme")
+
+Specify a default MyPaint brush.  This is a string value.
+
+.TP
+(default-pattern "Pine")
+
+Specify a default pattern.  This is a string value.
+
+.TP
+(default-palette "Default")
+
+Specify a default palette.  This is a string value.
+
+.TP
+(default-gradient "FG to BG (RGB)")
+
+Specify a default gradient.  This is a string value.
+
+.TP
+(default-tool-preset "Current Options")
+
+Specify a default tool preset.  The tool preset is searched for in the
+specified tool prests path.  This is a string value.
+
+.TP
+(default-font "Sans-serif")
+
+Specify a default font.  This is a string value.
+
+.TP
+(global-brush yes)
+
+When enabled, the selected brush will be used for all tools.  Possible values
+are yes and no.
+
+.TP
+(global-dynamics yes)
+
+When enabled, the selected dynamics will be used for all tools.  Possible
+values are yes and no.
+
+.TP
+(global-pattern yes)
+
+When enabled, the selected pattern will be used for all tools.  Possible
+values are yes and no.
+
+.TP
+(global-palette yes)
+
+When enabled, the selected palette will be used for all tools.  Possible
+values are yes and no.
+
+.TP
+(global-gradient yes)
+
+When enabled, the selected gradient will be used for all tools.  Possible
+values are yes and no.
+
+.TP
+(global-font yes)
+
+When enabled, the selected font will be used for all tools.  Possible values
+are yes and no.
+
+.TP
+(default-image
+    (width 1920)
+    (height 1080)
+    (unit pixels)
+    (xresolution 300)
+    (yresolution 300)
+    (resolution-unit inches)
+    (image-type rgb)
+    (precision u8-gamma)
+    (color-managed yes)
+    (color-profile NULL)
+    (fill-type background)
+    (comment "Created with GIMP"))
+
+Sets the default image in the "File/New" dialog.  This is a parameter list.
+
+.TP
+(default-grid
+    (style solid)
+    (fgcolor (color-rgba 0 0 0 1))
+    (bgcolor (color-rgba 1 1 1 1))
+    (xspacing 10)
+    (yspacing 10)
+    (spacing-unit inches)
+    (xoffset 0)
+    (yoffset 0)
+    (offset-unit inches))
+
+Specify a default image grid.  This is a parameter list.
+
+.TP
+(undo-levels 5)
+
+Sets the minimal number of operations that can be undone. More undo levels are
+kept available until the undo-size limit is reached.  This is an integer
+value.
+
+.TP
+(undo-size 1g)
+
+Sets an upper limit to the memory that is used per image to keep operations on
+the undo stack. Regardless of this setting, at least as many undo-levels as
+configured can be undone.  The integer size can contain a suffix of 'B', 'K',
+\&'M' or 'G' which makes GIMP interpret the size as being specified in bytes,
+kilobytes, megabytes or gigabytes. If no suffix is specified the size defaults
+to being specified in kilobytes.
+
+.TP
+(undo-preview-size large)
+
+Sets the size of the previews in the Undo History.  Possible values are tiny,
+extra-small, small, medium, large, extra-large, huge, enormous and gigantic.
+
+.TP
+(plug-in-history-size 10)
+
+How many recently used filters and plug-ins to keep on the Filters menu.  This
+is an integer value.
+
+.TP
+(pluginrc-path "${gimp_dir}/pluginrc")
+
+Sets the pluginrc search path.  This is a single filename.
+
+.TP
+(layer-previews yes)
+
+Sets whether GIMP should create previews of layers and channels. Previews in
+the layers and channels dialog are nice to have but they can slow things down
+when working with large images.  Possible values are yes and no.
+
+.TP
+(group-layer-previews yes)
+
+Sets whether GIMP should create previews of layer groups. Layer group previews
+are more expensive than ordinary layer previews.  Possible values are yes and
+no.
+
+.TP
+(layer-preview-size medium)
+
+Sets the preview size used for layers and channel previews in newly created
+dialogs.  Possible values are tiny, extra-small, small, medium, large,
+extra-large, huge, enormous and gigantic.
+
+.TP
+(thumbnail-size normal)
+
+Sets the size of the thumbnail shown in the Open dialog.  Possible values are
+none, normal and large.
+
+.TP
+(thumbnail-filesize-limit 4M)
+
+The thumbnail in the Open dialog will be automatically updated if the file
+being previewed is smaller than the size set here.  The integer size can
+contain a suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the size
+as being specified in bytes, kilobytes, megabytes or gigabytes. If no suffix
+is specified the size defaults to being specified in kilobytes.
+
+.TP
+(color-management
+    (mode display)
+    (display-profile-from-gdk no)
+    (display-rendering-intent relative-colorimetric)
+    (display-use-black-point-compensation yes)
+    (display-optimize yes)
+    (simulation-rendering-intent perceptual)
+    (simulation-use-black-point-compensation no)
+    (simulation-optimize yes)
+    (simulation-gamut-check no)
+    (out-of-gamut-color (color-rgb 1 0 1))
+    (show-rgb-u8 no)
+    (show-hsv no)
+    (display-module "CdisplayLcms"))
+
+Defines the color management behavior.  This is a parameter list.
+
+.TP
+(save-document-history yes)
+
+Keep a permanent record of all opened and saved files in the Recent Documents
+list.  Possible values are yes and no.
+
+.TP
+(quick-mask-color (color-rgba 1 0 0 0.5))
+
+Sets the default quick mask color.  The color is specified in the form
+(color-rgba red green blue alpha) with channel values as floats in the range
+of 0.0 to 1.0.
+
+.TP
+(import-promote-float no)
+
+Promote imported images to floating point precision. Does not apply to indexed
+images.  Possible values are yes and no.
+
+.TP
+(import-promote-dither yes)
+
+When promoting imported images to floating point precision, also add minimal
+noise in order to distribute color values a bit.  Possible values are yes and
+no.
+
+.TP
+(import-add-alpha no)
+
+Add an alpha channel to all layers of imported images.  Possible values are
+yes and no.
+
+.TP
+(import-raw-plug-in "")
+
+Which plug-in to use for importing raw digital camera files.  This is a single
+filename.
+
+.TP
+(export-file-type png)
+
+Export file type used by default.  Possible values are png, jpg, ora, psd,
+pdf, tif, bmp and webp.
+
+.TP
+(export-color-profile yes)
+
+Export the image's color profile by default.  Possible values are yes and no.
+
+.TP
+(export-metadata-exif yes)
+
+Export Exif metadata by default.  Possible values are yes and no.
+
+.TP
+(export-metadata-xmp yes)
+
+Export XMP metadata by default.  Possible values are yes and no.
+
+.TP
+(export-metadata-iptc yes)
+
+Export IPTC metadata by default.  Possible values are yes and no.
+
+.TP
+(debug-policy fatal)
+
+Try generating debug data for bug reporting when appropriate.  Possible values
+are warning, critical, fatal and never.
+
+.TP
+(check-updates yes)
+
+Check for availability of GIMP updates through background internet queries. 
+Possible values are yes and no.
+
+.TP
+(check-update-timestamp 0)
+
+Timestamp of the last update check.  (null)
+
+.TP
+(last-release-timestamp 0)
+
+The timestamp for the last known release date.  (null)
+
+.TP
+
+The last known release version of GIMP as queried from official website.  This
+is a string value.
+
+.TP
+(last-revision 0)
+
+The timestamp for the last known release date.  This is an integer value.
+
+.TP
+
+The last known release version of GIMP as queried from official website.  This
+is a string value.
+
+.TP
+(transparency-size medium-checks)
+
+Sets the size of the checkerboard used to display transparency.  Possible
+values are small-checks, medium-checks and large-checks.
+
+.TP
+(transparency-type gray-checks)
+
+Sets the manner in which transparency is displayed in images.  Possible values
+are light-checks, gray-checks, dark-checks, white-only, gray-only and
+black-only.
+
+.TP
+(snap-distance 8)
+
+This is the distance in pixels where Guide and Grid snapping activates.  This
+is an integer value.
+
+.TP
+(marching-ants-speed 200)
+
+Speed of marching ants in the selection outline.  This value is in
+milliseconds (less time indicates faster marching).  This is an integer value.
+
+.TP
+(resize-windows-on-zoom no)
+
+When enabled, the image window will automatically resize itself when zooming
+into and out of images. This setting only takes effect in multi-window mode. 
+Possible values are yes and no.
+
+.TP
+(resize-windows-on-resize no)
+
+When enabled, the image window will automatically resize itself whenever the
+physical image size changes. This setting only takes effect in multi-window
+mode.  Possible values are yes and no.
+
+.TP
+(default-show-all no)
+
+Show full image content by default.  Possible values are yes and no.
+
+.TP
+(default-dot-for-dot yes)
+
+When enabled, this will ensure that each pixel of an image gets mapped to a
+pixel on the screen.  Possible values are yes and no.
+
+.TP
+(initial-zoom-to-fit yes)
+
+When enabled, this will ensure that the full image is visible after a file is
+opened, otherwise it will be displayed with a scale of 1:1.  Possible values
+are yes and no.
+
+.TP
+(cursor-mode tool-crosshair)
+
+Sets the type of mouse pointers to use.  Possible values are tool-icon,
+tool-crosshair and crosshair.
+
+.TP
+(cursor-updating yes)
+
+Context-dependent mouse pointers are helpful.  They are enabled by default. 
+However, they require overhead that you may want to do without.  Possible
+values are yes and no.
+
+.TP
+(show-brush-outline yes)
+
+When enabled, all paint tools will show a preview of the current brush's
+outline.  Possible values are yes and no.
+
+.TP
+(snap-brush-outline no)
+
+When enabled, the brush outline will snap to individual dabs while painting. 
+Possible values are yes and no.
+
+.TP
+(show-paint-tool-cursor yes)
+
+When enabled, the mouse pointer will be shown over the image while using a
+paint tool.  Possible values are yes and no.
+
+.TP
+(image-title-format "%D*%f-%p.%i (%t, %o, %L) %wx%h")
+
+Sets the text to appear in image window titles.  This is a format string;
+certain % character sequences are recognised and expanded as follows:
+.br
+
+.br
+%%  literal percent sign
+.br
+%f  bare filename, or "Untitled"
+.br
+%F  full path to file, or "Untitled"
+.br
+%p  PDB image id
+.br
+%i  view instance number
+.br
+%t  image type (RGB, grayscale, indexed)
+.br
+%z  zoom factor as a percentage
+.br
+%s  source scale factor
+.br
+%d  destination scale factor
+.br
+%Dx expands to x if the image is dirty, the empty string otherwise
+.br
+%Cx expands to x if the image is clean, the empty string otherwise
+.br
+%B  expands to (modified) if the image is dirty, the empty string otherwise
+.br
+%A  expands to (clean) if the image is clean, the empty string otherwise
+.br
+%Nx expands to x if the image is export-dirty, the empty string otherwise
+.br
+%Ex expands to x if the image is export-clean, the empty string otherwise
+.br
+%l  the number of layers
+.br
+%L  the number of layers (long form)
+.br
+%m  memory used by the image
+.br
+%n  the name of the active layer/channel
+.br
+%P  the PDB id of the active layer/channel
+.br
+%w  image width in pixels
+.br
+%W  image width in real-world units
+.br
+%h  image height in pixels
+.br
+%H  image height in real-world units
+.br
+%M  the image size expressed in megapixels
+.br
+%u  unit symbol
+.br
+%U  unit abbreviation
+.br
+%x  the width of the active layer/channel in pixels
+.br
+%X  the width of the active layer/channel in real-world units
+.br
+%y  the height of the active layer/channel in pixels
+.br
+%Y  the height of the active layer/channel in real-world units
+.br
+%o  the name of the image's color profile
+.br
+
+.br
+
+.TP
+(image-status-format "%n (%m)")
+
+Sets the text to appear in image window status bars.  This is a format string;
+certain % character sequences are recognised and expanded as follows:
+.br
+
+.br
+%%  literal percent sign
+.br
+%f  bare filename, or "Untitled"
+.br
+%F  full path to file, or "Untitled"
+.br
+%p  PDB image id
+.br
+%i  view instance number
+.br
+%t  image type (RGB, grayscale, indexed)
+.br
+%z  zoom factor as a percentage
+.br
+%s  source scale factor
+.br
+%d  destination scale factor
+.br
+%Dx expands to x if the image is dirty, the empty string otherwise
+.br
+%Cx expands to x if the image is clean, the empty string otherwise
+.br
+%B  expands to (modified) if the image is dirty, the empty string otherwise
+.br
+%A  expands to (clean) if the image is clean, the empty string otherwise
+.br
+%Nx expands to x if the image is export-dirty, the empty string otherwise
+.br
+%Ex expands to x if the image is export-clean, the empty string otherwise
+.br
+%l  the number of layers
+.br
+%L  the number of layers (long form)
+.br
+%m  memory used by the image
+.br
+%n  the name of the active layer/channel
+.br
+%P  the PDB id of the active layer/channel
+.br
+%w  image width in pixels
+.br
+%W  image width in real-world units
+.br
+%h  image height in pixels
+.br
+%H  image height in real-world units
+.br
+%M  the image size expressed in megapixels
+.br
+%u  unit symbol
+.br
+%U  unit abbreviation
+.br
+%x  the width of the active layer/channel in pixels
+.br
+%X  the width of the active layer/channel in real-world units
+.br
+%y  the height of the active layer/channel in pixels
+.br
+%Y  the height of the active layer/channel in real-world units
+.br
+%o  the name of the image's color profile
+.br
+
+.br
+
+.TP
+(monitor-xresolution 96)
+
+Sets the monitor's horizontal resolution, in dots per inch.  If set to 0,
+forces the X server to be queried for both horizontal and vertical resolution
+information.  This is a float value.
+
+.TP
+(monitor-yresolution 96)
+
+Sets the monitor's vertical resolution, in dots per inch.  If set to 0, forces
+the X server to be queried for both horizontal and vertical resolution
+information.  This is a float value.
+
+.TP
+(monitor-resolution-from-windowing-system yes)
+
+When enabled, GIMP will use the monitor resolution from the windowing system. 
+Possible values are yes and no.
+
+.TP
+(navigation-preview-size medium)
+
+Sets the size of the navigation preview available in the lower right corner of
+the image window.  Possible values are tiny, extra-small, small, medium,
+large, extra-large, huge, enormous and gigantic.
+
+.TP
+(default-view
+    (show-menubar yes)
+    (show-statusbar yes)
+    (show-rulers yes)
+    (show-scrollbars yes)
+    (show-selection yes)
+    (show-layer-boundary yes)
+    (show-canvas-boundary yes)
+    (show-guides yes)
+    (show-grid no)
+    (show-sample-points yes)
+    (snap-to-guides yes)
+    (snap-to-grid no)
+    (snap-to-canvas no)
+    (snap-to-path no)
+    (padding-mode default)
+    (padding-color (color-rgb 1 1 1))
+    (padding-in-show-all no))
+
+Sets the default settings for the image view.  This is a parameter list.
+
+.TP
+(default-fullscreen-view
+    (show-menubar yes)
+    (show-statusbar yes)
+    (show-rulers yes)
+    (show-scrollbars yes)
+    (show-selection yes)
+    (show-layer-boundary yes)
+    (show-canvas-boundary yes)
+    (show-guides yes)
+    (show-grid no)
+    (show-sample-points yes)
+    (snap-to-guides yes)
+    (snap-to-grid no)
+    (snap-to-canvas no)
+    (snap-to-path no)
+    (padding-mode default)
+    (padding-color (color-rgb 1 1 1))
+    (padding-in-show-all no))
+
+Sets the default settings used when an image is viewed in fullscreen mode. 
+This is a parameter list.
+
+.TP
+(activate-on-focus yes)
+
+When enabled, an image will become the active image when its image window
+receives the focus. This is useful for window managers using "click to focus".
+ Possible values are yes and no.
+
+.TP
+(space-bar-action pan)
+
+What to do when the space bar is pressed in the image window.  Possible values
+are none, pan and move.
+
+.TP
+(zoom-quality high)
+
+There's a tradeoff between speed and quality of the zoomed-out display. 
+Possible values are low and high.
+
+.TP
+(use-event-history no)
+
+Bugs in event history buffer are frequent so in case of cursor offset problems
+turning it off helps.  Possible values are yes and no.
+
+.TP
+(edit-non-visible no)
+
+When enabled, non-visible layers can be edited as normal.  Possible values are
+yes and no.
+
+.TP
+(move-tool-changes-active no)
+
+If enabled, the move tool sets the edited layer or path as active.  This used
+to be the default behaviour in older versions.  Possible values are yes and
+no.
+
+.TP
+(filter-tool-max-recent 10)
+
+How many recent settings to keep around in filter tools.  This is an integer
+value.
+
+.TP
+(filter-tool-use-last-settings no)
+
+Default to the last used settings in filter tools.  Possible values are yes
+and no.
+
+.TP
+(filter-tool-show-color-options no)
+
+Show advanced color options in filter tools.  Possible values are yes and no.
+
+.TP
+(trust-dirty-flag no)
+
+When enabled, GIMP will not save an image if it has not been changed since it
+was opened.  Possible values are yes and no.
+
+.TP
+(save-device-status yes)
+
+Remember the current tool, pattern, color, and brush across GIMP sessions. 
+Possible values are yes and no.
+
+.TP
+(devices-share-tool no)
+
+When enabled, the same tool and tool options will be used for all input
+devices. No tool switching will occur when the input device changes.  Possible
+values are yes and no.
+
+.TP
+(save-session-info yes)
+
+Save the positions and sizes of the main dialogs when GIMP exits.  Possible
+values are yes and no.
+
+.TP
+(restore-session yes)
+
+Let GIMP try to restore your last saved session on each startup.  Possible
+values are yes and no.
+
+.TP
+(restore-monitor no)
+
+When enabled, GIMP will try to restore windows on the monitor they were open
+before.  When disabled, windows will appear on the currently used monitor. 
+Possible values are yes and no.
+
+.TP
+(save-tool-options yes)
+
+Save the tool options when GIMP exits.  Possible values are yes and no.
+
+.TP
+(compact-sliders yes)
+
+Use compact style for sliders.  Possible values are yes and no.
+
+.TP
+(show-tooltips yes)
+
+Show a tooltip when the pointer hovers over an item.  Possible values are yes
+and no.
+
+.TP
+(tearoff-menus yes)
+
+When enabled, menus can be torn off.  Possible values are yes and no.
+
+.TP
+(can-change-accels no)
+
+When enabled, you can change keyboard shortcuts for menu items by hitting a
+key combination while the menu item is highlighted.  Possible values are yes
+and no.
+
+.TP
+(save-accels yes)
+
+Save changed keyboard shortcuts when GIMP exits.  Possible values are yes and
+no.
+
+.TP
+(restore-accels yes)
+
+Restore saved keyboard shortcuts on each GIMP startup.  Possible values are
+yes and no.
+
+.TP
+(last-opened-size 10)
+
+How many recently opened image filenames to keep on the File menu.  This is an
+integer value.
+
+.TP
+(max-new-image-size 128M)
+
+GIMP will warn the user if an attempt is made to create an image that would
+take more memory than the size specified here.  The integer size can contain a
+suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the size as being
+specified in bytes, kilobytes, megabytes or gigabytes. If no suffix is
+specified the size defaults to being specified in kilobytes.
+
+.TP
+(toolbox-color-area yes)
+
+Show the current foreground and background colors in the toolbox.  Possible
+values are yes and no.
+
+.TP
+(toolbox-foo-area no)
+
+Show the currently selected brush, pattern and gradient in the toolbox. 
+Possible values are yes and no.
+
+.TP
+(toolbox-image-area no)
+
+Show the currently active image in the toolbox.  Possible values are yes and
+no.
+
+.TP
+(toolbox-wilber yes)
+
+Show the GIMP mascot at the top of the toolbox.  Possible values are yes and
+no.
+
+.TP
+(toolbox-groups yes)
+
+Use a single toolbox button for grouped tools.  Possible values are yes and
+no.
+
+.TP
+(toolbox-group-menu-mode hover-single-column)
+
+Menu mode of grouped tools.  Possible values are click, hover and
+hover-single-column.
+
+.TP
+(theme-path "${gimp_dir}/themes:${gimp_data_dir}/themes")
+
+Sets the theme search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(theme "Dark")
+
+The name of the theme to use.  This is a string value.
+
+.TP
+(icon-theme-path "${gimp_dir}/icons:${gimp_data_dir}/icons")
+
+Sets the icon theme search path.  This is a colon-separated list of folders to
+search.
+
+.TP
+(icon-theme "Symbolic")
+
+The name of the icon theme to use.  This is a string value.
+
+.TP
+(icon-size auto)
+
+The size of the icons to use.  Possible values are auto, theme, small, medium,
+large and huge.
+
+.TP
+(use-help yes)
+
+When enabled, pressing F1 will open the help browser.  Possible values are yes
+and no.
+
+.TP
+(show-help-button yes)
+
+When enabled, dialogs will show a help button that gives access to the related
+help page.  Without this button, the help page can still be reached by
+pressing F1.  Possible values are yes and no.
+
+.TP
+(help-locales "")
+
+Specifies the language preferences used by the help system. This is a
+colon-separated list of language identifiers with decreasing priority. If
+empty, the language is taken from the user's locale setting.  This is a string
+value.
+
+.TP
+(help-browser web-browser)
+
+Sets the browser used by the help system.  Possible values are gimp and
+web-browser.
+
+.TP
+(search-show-unavailable-actions no)
+
+When enabled, a search of actions will also return inactive actions.  Possible
+values are yes and no.
+
+.TP
+(action-history-size 100)
+
+The maximum number of actions saved in history.  This is an integer value.
+
+.TP
+(user-manual-online no)
+
+When enabled, the online user manual will be used by the help system.
+Otherwise the locally installed copy is used.  Possible values are yes and no.
+
+.TP
+(user-manual-online-uri "https://docs.gimp.org/2.10")
+
+The location of the online user manual. This is used if 'user-manual-online'
+is enabled.  This is a string value.
+
+.TP
+(dock-window-hint utility)
+
+The window type hint that is set on dock windows and the toolbox window. This
+may affect the way your window manager decorates and handles these windows. 
+Possible values are normal, utility and keep-above.
+
+.TP
+(cursor-handedness right)
+
+Sets the handedness for cursor positioning.  Possible values are left and
+right.
+
+.TP
+(playground-npd-tool no)
+
+Enable the N-Point Deformation tool.  Possible values are yes and no.
+
+.TP
+(playground-seamless-clone-tool no)
+
+Enable the Seamless Clone tool.  Possible values are yes and no.
+
+.TP
+(color-profile-policy ask)
+
+How to handle embedded color profiles when opening a file.  Possible values
+are ask, keep and convert.
+
+.TP
+
+Sets the default folder path for all color profile file dialogs.  This is a
+single filename.
+
+.TP
+(image-convert-profile-intent relative-colorimetric)
+
+Sets the default rendering intent for the 'Convert to Color Profile' dialog. 
+Possible values are perceptual, relative-colorimetric, saturation and
+absolute-colorimetric.
+
+.TP
+(image-convert-profile-black-point-compensation yes)
+
+Sets the default 'Black Point Compensation' state for the 'Convert to Color
+Profile' dialog.  Possible values are yes and no.
+
+.TP
+(image-convert-precision-layer-dither-method none)
+
+Sets the default layer dithering method for the 'Convert Precision' dialog. 
+Possible values are none, floyd-steinberg, bayer, random, random-covariant,
+add, add-covariant, xor, xor-covariant, blue-noise and blue-noise-covariant.
+
+.TP
+(image-convert-precision-text-layer-dither-method none)
+
+Sets the default text layer dithering method for the 'Convert Precision'
+dialog.  Possible values are none, floyd-steinberg, bayer, random,
+random-covariant, add, add-covariant, xor, xor-covariant, blue-noise and
+blue-noise-covariant.
+
+.TP
+(image-convert-precision-channel-dither-method none)
+
+Sets the default channel dithering method for the 'Convert Precision' dialog. 
+Possible values are none, floyd-steinberg, bayer, random, random-covariant,
+add, add-covariant, xor, xor-covariant, blue-noise and blue-noise-covariant.
+
+.TP
+(image-convert-indexed-palette-type generate)
+
+Sets the default palette type for the 'Convert to Indexed' dialog.  Possible
+values are generate, web, mono and custom.
+
+.TP
+(image-convert-indexed-max-colors 256)
+
+Sets the default maximum number of colors for the 'Convert to Indexed' dialog.
+ This is an integer value.
+
+.TP
+(image-convert-indexed-remove-duplicates yes)
+
+Sets the default 'Remove duplicate colors' state for the 'Convert to Indexed'
+dialog.  Possible values are yes and no.
+
+.TP
+(image-convert-indexed-dither-type none)
+
+Sets the default dithering type for the 'Convert to Indexed' dialog.  Possible
+values are none, fs, fs-lowbleed and fixed.
+
+.TP
+(image-convert-indexed-dither-alpha no)
+
+Sets the default 'Dither alpha' state for the 'Convert to Indexed' dialog. 
+Possible values are yes and no.
+
+.TP
+(image-convert-indexed-dither-text-layers no)
+
+Sets the default 'Dither text layers' state for the 'Convert to Indexed'
+dialog.  Possible values are yes and no.
+
+.TP
+(image-resize-fill-type transparent)
+
+Sets the default fill type for the 'Canvas Size' dialog.  Possible values are
+foreground, background, white, transparent and pattern.
+
+.TP
+(image-resize-layer-set none)
+
+Sets the default set of layers to resize for the 'Canvas Size' dialog. 
+Possible values are none, all, image-sized, visible and linked.
+
+.TP
+(image-resize-resize-text-layers no)
+
+Sets the default 'Resize text layers' state for the 'Canvas Size' dialog. 
+Possible values are yes and no.
+
+.TP
+(layer-new-name "Layer")
+
+Sets the default layer name for the 'New Layer' dialog.  This is a string
+value.
+
+.TP
+(layer-new-mode normal)
+
+Sets the default mode for the 'New Layer' dialog.  Possible values are
+normal-legacy, dissolve, behind-legacy, multiply-legacy, screen-legacy,
+overlay-legacy, difference-legacy, addition-legacy, subtract-legacy,
+darken-only-legacy, lighten-only-legacy, hsv-hue-legacy,
+hsv-saturation-legacy, hsl-color-legacy, hsv-value-legacy, divide-legacy,
+dodge-legacy, burn-legacy, hardlight-legacy, softlight-legacy,
+grain-extract-legacy, grain-merge-legacy, color-erase-legacy, overlay,
+lch-hue, lch-chroma, lch-color, lch-lightness, normal, behind, multiply,
+screen, difference, addition, subtract, darken-only, lighten-only, hsv-hue,
+hsv-saturation, hsl-color, hsv-value, divide, dodge, burn, hardlight,
+softlight, grain-extract, grain-merge, vivid-light, pin-light, linear-light,
+hard-mix, exclusion, linear-burn, luma-darken-only, luma-lighten-only,
+luminance, color-erase, erase, merge, split, pass-through, replace and
+anti-erase.
+
+.TP
+(layer-new-blend-space auto)
+
+Sets the default blend space for the 'New Layer' dialog.  Possible values are
+auto, rgb-linear, rgb-perceptual and lab.
+
+.TP
+(layer-new-composite-space auto)
+
+Sets the default composite space for the 'New Layer' dialog.  Possible values
+are auto, rgb-linear, rgb-perceptual and lab.
+
+.TP
+(layer-new-composite-mode auto)
+
+Sets the default composite mode for the 'New Layer' dialog.  Possible values
+are auto, union, clip-to-backdrop, clip-to-layer and intersection.
+
+.TP
+(layer-new-opacity 1)
+
+Sets the default opacity for the 'New Layer' dialog.  This is a float value.
+
+.TP
+(layer-new-fill-type transparent)
+
+Sets the default fill type for the 'New Layer' dialog.  Possible values are
+foreground, background, white, transparent and pattern.
+
+.TP
+(layer-resize-fill-type transparent)
+
+Sets the default fill type for the 'Layer Boundary Size' dialog.  Possible
+values are foreground, background, white, transparent and pattern.
+
+.TP
+(layer-add-mask-type white)
+
+Sets the default mask for the 'Add Layer Mask' dialog.  Possible values are
+white, black, alpha, alpha-transfer, selection, copy and channel.
+
+.TP
+(layer-add-mask-invert no)
+
+Sets the default 'invert mask' state for the 'Add Layer Mask' dialog. 
+Possible values are yes and no.
+
+.TP
+(layer-merge-type expand-as-necessary)
+
+Sets the default merge type for the 'Merge Visible Layers' dialog.  Possible
+values are expand-as-necessary, clip-to-image, clip-to-bottom-layer and
+flatten-image.
+
+.TP
+(layer-merge-active-group-only yes)
+
+Sets the default 'Active group only' for the 'Merge Visible Layers' dialog. 
+Possible values are yes and no.
+
+.TP
+(layer-merge-discard-invisible no)
+
+Sets the default 'Discard invisible' for the 'Merge Visible Layers' dialog. 
+Possible values are yes and no.
+
+.TP
+(channel-new-name "Channel")
+
+Sets the default channel name for the 'New Channel' dialog.  This is a string
+value.
+
+.TP
+(channel-new-color (color-rgba 0 0 0 0.5))
+
+Sets the default color and opacity for the 'New Channel' dialog.  The color is
+specified in the form (color-rgba red green blue alpha) with channel values as
+floats in the range of 0.0 to 1.0.
+
+.TP
+(path-new-name "Path")
+
+Sets the default path name for the 'New Path' dialog.  This is a string value.
+
+.TP
+
+Sets the default folder path for the 'Export Path' dialog.  This is a single
+filename.
+
+.TP
+(path-export-active-only yes)
+
+Sets the default 'Export the active path' state for the 'Export Path' dialog. 
+Possible values are yes and no.
+
+.TP
+
+Sets the default folder path for the 'Import Path' dialog.  This is a single
+filename.
+
+.TP
+(path-import-merge no)
+
+Sets the default 'Merge imported paths' state for the 'Import Path' dialog. 
+Possible values are yes and no.
+
+.TP
+(path-import-scale no)
+
+Sets the default 'Scale imported paths to fit size' state for the 'Import
+Path' dialog.  Possible values are yes and no.
+
+.TP
+(selection-feather-radius 5)
+
+Sets the default feather radius for the 'Feather Selection' dialog.  This is a
+float value.
+
+.TP
+(selection-feather-edge-lock yes)
+
+Sets the default 'Selected areas continue outside the image' setting for the
+\&'Feather Selection' dialog.  Possible values are yes and no.
+
+.TP
+(selection-grow-radius 1)
+
+Sets the default grow radius for the 'Grow Selection' dialog.  This is a float
+value.
+
+.TP
+(selection-shrink-radius 1)
+
+Sets the default shrink radius for the 'Shrink Selection' dialog.  This is a
+float value.
+
+.TP
+(selection-shrink-edge-lock no)
+
+Sets the default 'Selected areas continue outside the image' setting for the
+\&'Shrink Selection' dialog.  Possible values are yes and no.
+
+.TP
+(selection-border-radius 5)
+
+Sets the default border radius for the 'Border Selection' dialog.  This is a
+float value.
+
+.TP
+(selection-border-style smooth)
+
+Sets the default border style for the 'Border Selection' dialog.  Possible
+values are hard, smooth and feathered.
+
+.TP
+(selection-border-edge-lock no)
+
+Sets the default 'Selected areas continue outside the image' setting for the
+\&'Border Selection' dialog.  Possible values are yes and no.
+
+.TP
+(fill-options
+    (style solid)
+    (antialias yes)
+    (feather no)
+    (feather-radius 10))
+
+The default fill options for the fill dialogs.  This is a parameter list.
+
+.TP
+(stroke-options
+    (style solid)
+    (antialias yes)
+    (feather no)
+    (feather-radius 10)
+    (method line)
+    (width 6)
+    (unit pixels)
+    (cap-style butt)
+    (join-style miter)
+    (miter-limit 10)
+    (dash-offset 0)
+    (dash-info 0)
+    (emulate-brush-dynamics no))
+
+The default stroke options for the stroke dialogs.  This is a parameter list.
+
+.TP
+(fractalexplorer-path "${gimp_dir}/fractalexplorer:${gimp_data_dir}/fractalexplorer")
+
+Where to search for fractals used by the Fractal Explorer plug-in.  This is a
+colon-separated list of folders to search.
+
+.TP
+(gfig-path "${gimp_dir}/gfig:${gimp_data_dir}/gfig")
+
+Where to search for Gfig figures used by the Gfig plug-in.  This is a
+colon-separated list of folders to search.
+
+.TP
+(gflare-path "${gimp_dir}/gflare:${gimp_data_dir}/gflare")
+
+Where to search for gflares used by the GFlare plug-in.  This is a
+colon-separated list of folders to search.
+
+.TP
+(gimpressionist-path "${gimp_dir}/gimpressionist:${gimp_data_dir}/gimpressionist")
+
+Where to search for data used by the Gimpressionist plug-in.  This is a
+colon-separated list of folders to search.
+
+.TP
+(script-fu-path "${gimp_dir}/scripts:${gimp_data_dir}/scripts")
+
+This path will be searched for scripts when the Script-Fu plug-in is run. 
+This is a colon-separated list of folders to search.
+
+.PP
+.SH PATH EXPANSION
+Strings of type PATH are expanded in a manner similar to
+.BR bash (1).
+Specifically: tilde (~) is expanded to the user's home directory. Note that
+the bash feature of being able to refer to other user's home directories
+by writing ~userid/ is not valid in this file.
+
+${variable} is expanded to the current value of an environment variable.
+There are a few variables that are pre-defined:
+.TP
+.I gimp_dir
+The personal gimp directory which is set to the value of the environment
+variable GIMP2_DIRECTORY or to @manpage_gimpdir@.
+.TP
+.I gimp_data_dir
+Base for paths to shareable data, which is set to the value of the
+environment variable GIMP2_DATADIR or to the compiled-in default value
+@gimpdatadir@.
+.TP
+.I gimp_plug_in_dir
+Base to paths for architecture-specific plug-ins and modules, which is set
+to the value of the environment variable GIMP2_PLUGINDIR or to the
+compiled-in default value @gimpplugindir@.
+.TP
+.I gimp_sysconf_dir
+Path to configuration files, which is set to the value of the environment
+variable GIMP2_SYSCONFDIR or to the compiled-in default value 
+@gimpsysconfdir@.
+.TP
+.I gimp_cache_dir
+Path to cached files, which is set to the value of the environment
+variable GIMP2_CACHEDIR or to the system default for per-user cached files.
+.TP
+.I gimp_temp_dir
+Path to temporary files, which is set to the value of the environment
+variable GIMP2_TEMPDIR or to the system default for temporary files.
+
+.SH FILES
+.TP
+.I @gimpsysconfdir@/gimprc
+System-wide configuration file
+.TP
+.I @manpage_gimpdir@/gimprc
+Per-user configuration file
+
+.SH "SEE ALSO"
+.BR gimp (1)