diff options
Diffstat (limited to 't/test-lib-functions.sh')
| -rw-r--r-- | t/test-lib-functions.sh | 1877 |
1 files changed, 1877 insertions, 0 deletions
diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh new file mode 100644 index 0000000..796093a --- /dev/null +++ b/t/test-lib-functions.sh @@ -0,0 +1,1877 @@ +# Library of functions shared by all tests scripts, included by +# test-lib.sh. +# +# Copyright (c) 2005 Junio C Hamano +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/ . + +# The semantics of the editor variables are that of invoking +# sh -c "$EDITOR \"$@\"" files ... +# +# If our trash directory contains shell metacharacters, they will be +# interpreted if we just set $EDITOR directly, so do a little dance with +# environment variables to work around this. +# +# In particular, quoting isn't enough, as the path may contain the same quote +# that we're using. +test_set_editor () { + FAKE_EDITOR="$1" + export FAKE_EDITOR + EDITOR='"$FAKE_EDITOR"' + export EDITOR +} + +test_decode_color () { + awk ' + function name(n) { + if (n == 0) return "RESET"; + if (n == 1) return "BOLD"; + if (n == 2) return "FAINT"; + if (n == 3) return "ITALIC"; + if (n == 7) return "REVERSE"; + if (n == 30) return "BLACK"; + if (n == 31) return "RED"; + if (n == 32) return "GREEN"; + if (n == 33) return "YELLOW"; + if (n == 34) return "BLUE"; + if (n == 35) return "MAGENTA"; + if (n == 36) return "CYAN"; + if (n == 37) return "WHITE"; + if (n == 40) return "BLACK"; + if (n == 41) return "BRED"; + if (n == 42) return "BGREEN"; + if (n == 43) return "BYELLOW"; + if (n == 44) return "BBLUE"; + if (n == 45) return "BMAGENTA"; + if (n == 46) return "BCYAN"; + if (n == 47) return "BWHITE"; + } + { + while (match($0, /\033\[[0-9;]*m/) != 0) { + printf "%s<", substr($0, 1, RSTART-1); + codes = substr($0, RSTART+2, RLENGTH-3); + if (length(codes) == 0) + printf "%s", name(0) + else { + n = split(codes, ary, ";"); + sep = ""; + for (i = 1; i <= n; i++) { + printf "%s%s", sep, name(ary[i]); + sep = ";" + } + } + printf ">"; + $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1); + } + print + } + ' +} + +lf_to_nul () { + perl -pe 'y/\012/\000/' +} + +nul_to_q () { + perl -pe 'y/\000/Q/' +} + +q_to_nul () { + perl -pe 'y/Q/\000/' +} + +q_to_cr () { + tr Q '\015' +} + +q_to_tab () { + tr Q '\011' +} + +qz_to_tab_space () { + tr QZ '\011\040' +} + +append_cr () { + sed -e 's/$/Q/' | tr Q '\015' +} + +remove_cr () { + tr '\015' Q | sed -e 's/Q$//' +} + +# In some bourne shell implementations, the "unset" builtin returns +# nonzero status when a variable to be unset was not set in the first +# place. +# +# Use sane_unset when that should not be considered an error. + +sane_unset () { + unset "$@" + return 0 +} + +test_tick () { + if test -z "${test_tick+set}" + then + test_tick=1112911993 + else + test_tick=$(($test_tick + 60)) + fi + GIT_COMMITTER_DATE="$test_tick -0700" + GIT_AUTHOR_DATE="$test_tick -0700" + export GIT_COMMITTER_DATE GIT_AUTHOR_DATE +} + +# Stop execution and start a shell. This is useful for debugging tests. +# +# Be sure to remove all invocations of this command before submitting. +# WARNING: the shell invoked by this helper does not have the same environment +# as the one running the tests (shell variables and functions are not +# available, and the options below further modify the environment). As such, +# commands copied from a test script might behave differently than when +# running the test. +# +# Usage: test_pause [options] +# -t +# Use your original TERM instead of test-lib.sh's "dumb". +# This usually restores color output in the invoked shell. +# -s +# Invoke $SHELL instead of $TEST_SHELL_PATH. +# -h +# Use your original HOME instead of test-lib.sh's "$TRASH_DIRECTORY". +# This allows you to use your regular shell environment and Git aliases. +# CAUTION: running commands copied from a test script into the paused shell +# might result in files in your HOME being overwritten. +# -a +# Shortcut for -t -s -h + +test_pause () { + PAUSE_TERM=$TERM && + PAUSE_SHELL=$TEST_SHELL_PATH && + PAUSE_HOME=$HOME && + while test $# != 0 + do + case "$1" in + -t) + PAUSE_TERM="$USER_TERM" + ;; + -s) + PAUSE_SHELL="$SHELL" + ;; + -h) + PAUSE_HOME="$USER_HOME" + ;; + -a) + PAUSE_TERM="$USER_TERM" + PAUSE_SHELL="$SHELL" + PAUSE_HOME="$USER_HOME" + ;; + *) + break + ;; + esac + shift + done && + TERM="$PAUSE_TERM" HOME="$PAUSE_HOME" "$PAUSE_SHELL" <&6 >&5 2>&7 +} + +# Wrap git with a debugger. Adding this to a command can make it easier +# to understand what is going on in a failing test. +# +# Usage: debug [options] <git command> +# -d <debugger> +# --debugger=<debugger> +# Use <debugger> instead of GDB +# -t +# Use your original TERM instead of test-lib.sh's "dumb". +# This usually restores color output in the debugger. +# WARNING: the command being debugged might behave differently than when +# running the test. +# +# Examples: +# debug git checkout master +# debug --debugger=nemiver git $ARGS +# debug -d "valgrind --tool=memcheck --track-origins=yes" git $ARGS +debug () { + GIT_DEBUGGER=1 && + DEBUG_TERM=$TERM && + while test $# != 0 + do + case "$1" in + -t) + DEBUG_TERM="$USER_TERM" + ;; + -d) + GIT_DEBUGGER="$2" && + shift + ;; + --debugger=*) + GIT_DEBUGGER="${1#*=}" + ;; + *) + break + ;; + esac + shift + done && + + dotfiles=".gdbinit .lldbinit" + + for dotfile in $dotfiles + do + dotfile="$USER_HOME/$dotfile" && + test -f "$dotfile" && cp "$dotfile" "$HOME" || : + done && + + TERM="$DEBUG_TERM" GIT_DEBUGGER="${GIT_DEBUGGER}" "$@" <&6 >&5 2>&7 && + + for dotfile in $dotfiles + do + rm -f "$HOME/$dotfile" + done +} + +# Usage: test_commit [options] <message> [<file> [<contents> [<tag>]]] +# -C <dir>: +# Run all git commands in directory <dir> +# --notick +# Do not call test_tick before making a commit +# --append +# Use ">>" instead of ">" when writing "<contents>" to "<file>" +# --printf +# Use "printf" instead of "echo" when writing "<contents>" to +# "<file>", use this to write escape sequences such as "\0", a +# trailing "\n" won't be added automatically. This option +# supports nothing but the FORMAT of printf(1), i.e. no custom +# ARGUMENT(s). +# --signoff +# Invoke "git commit" with --signoff +# --author <author> +# Invoke "git commit" with --author <author> +# --no-tag +# Do not tag the resulting commit +# --annotate +# Create an annotated tag with "--annotate -m <message>". Calls +# test_tick between making the commit and tag, unless --notick +# is given. +# +# This will commit a file with the given contents and the given commit +# message, and tag the resulting commit with the given tag name. +# +# <file>, <contents>, and <tag> all default to <message>. + +test_commit () { + local notick= && + local echo=echo && + local append= && + local author= && + local signoff= && + local indir= && + local tag=light && + while test $# != 0 + do + case "$1" in + --notick) + notick=yes + ;; + --printf) + echo=printf + ;; + --append) + append=yes + ;; + --author) + author="$2" + shift + ;; + --signoff) + signoff="$1" + ;; + --date) + notick=yes + GIT_COMMITTER_DATE="$2" + GIT_AUTHOR_DATE="$2" + shift + ;; + -C) + indir="$2" + shift + ;; + --no-tag) + tag=none + ;; + --annotate) + tag=annotate + ;; + *) + break + ;; + esac + shift + done && + indir=${indir:+"$indir"/} && + local file=${2:-"$1.t"} && + if test -n "$append" + then + $echo "${3-$1}" >>"$indir$file" + else + $echo "${3-$1}" >"$indir$file" + fi && + git ${indir:+ -C "$indir"} add -- "$file" && + if test -z "$notick" + then + test_tick + fi && + git ${indir:+ -C "$indir"} commit \ + ${author:+ --author "$author"} \ + $signoff -m "$1" && + case "$tag" in + none) + ;; + light) + git ${indir:+ -C "$indir"} tag "${4:-$1}" + ;; + annotate) + if test -z "$notick" + then + test_tick + fi && + git ${indir:+ -C "$indir"} tag -a -m "$1" "${4:-$1}" + ;; + esac +} + +# Call test_merge with the arguments "<message> <commit>", where <commit> +# can be a tag pointing to the commit-to-merge. + +test_merge () { + label="$1" && + shift && + test_tick && + git merge -m "$label" "$@" && + git tag "$label" +} + +# Efficiently create <nr> commits, each with a unique number (from 1 to <nr> +# by default) in the commit message. +# +# Usage: test_commit_bulk [options] <nr> +# -C <dir>: +# Run all git commands in directory <dir> +# --ref=<n>: +# ref on which to create commits (default: HEAD) +# --start=<n>: +# number commit messages from <n> (default: 1) +# --message=<msg>: +# use <msg> as the commit mesasge (default: "commit %s") +# --filename=<fn>: +# modify <fn> in each commit (default: %s.t) +# --contents=<string>: +# place <string> in each file (default: "content %s") +# --id=<string>: +# shorthand to use <string> and %s in message, filename, and contents +# +# The message, filename, and contents strings are evaluated by printf, with the +# first "%s" replaced by the current commit number. So you can do: +# +# test_commit_bulk --filename=file --contents="modification %s" +# +# to have every commit touch the same file, but with unique content. +# +test_commit_bulk () { + tmpfile=.bulk-commit.input + indir=. + ref=HEAD + n=1 + message='commit %s' + filename='%s.t' + contents='content %s' + while test $# -gt 0 + do + case "$1" in + -C) + indir=$2 + shift + ;; + --ref=*) + ref=${1#--*=} + ;; + --start=*) + n=${1#--*=} + ;; + --message=*) + message=${1#--*=} + ;; + --filename=*) + filename=${1#--*=} + ;; + --contents=*) + contents=${1#--*=} + ;; + --id=*) + message="${1#--*=} %s" + filename="${1#--*=}-%s.t" + contents="${1#--*=} %s" + ;; + -*) + BUG "invalid test_commit_bulk option: $1" + ;; + *) + break + ;; + esac + shift + done + total=$1 + + add_from= + if git -C "$indir" rev-parse --quiet --verify "$ref" + then + add_from=t + fi + + while test "$total" -gt 0 + do + test_tick && + echo "commit $ref" + printf 'author %s <%s> %s\n' \ + "$GIT_AUTHOR_NAME" \ + "$GIT_AUTHOR_EMAIL" \ + "$GIT_AUTHOR_DATE" + printf 'committer %s <%s> %s\n' \ + "$GIT_COMMITTER_NAME" \ + "$GIT_COMMITTER_EMAIL" \ + "$GIT_COMMITTER_DATE" + echo "data <<EOF" + printf "$message\n" $n + echo "EOF" + if test -n "$add_from" + then + echo "from $ref^0" + add_from= + fi + printf "M 644 inline $filename\n" $n + echo "data <<EOF" + printf "$contents\n" $n + echo "EOF" + echo + n=$((n + 1)) + total=$((total - 1)) + done >"$tmpfile" + + git -C "$indir" \ + -c fastimport.unpacklimit=0 \ + fast-import <"$tmpfile" || return 1 + + # This will be left in place on failure, which may aid debugging. + rm -f "$tmpfile" + + # If we updated HEAD, then be nice and update the index and working + # tree, too. + if test "$ref" = "HEAD" + then + git -C "$indir" checkout -f HEAD || return 1 + fi + +} + +# This function helps systems where core.filemode=false is set. +# Use it instead of plain 'chmod +x' to set or unset the executable bit +# of a file in the working directory and add it to the index. + +test_chmod () { + chmod "$@" && + git update-index --add "--chmod=$@" +} + +# Get the modebits from a file or directory, ignoring the setgid bit (g+s). +# This bit is inherited by subdirectories at their creation. So we remove it +# from the returning string to prevent callers from having to worry about the +# state of the bit in the test directory. +# +test_modebits () { + ls -ld "$1" | sed -e 's|^\(..........\).*|\1|' \ + -e 's|^\(......\)S|\1-|' -e 's|^\(......\)s|\1x|' +} + +# Unset a configuration variable, but don't fail if it doesn't exist. +test_unconfig () { + config_dir= + if test "$1" = -C + then + shift + config_dir=$1 + shift + fi + git ${config_dir:+-C "$config_dir"} config --unset-all "$@" + config_status=$? + case "$config_status" in + 5) # ok, nothing to unset + config_status=0 + ;; + esac + return $config_status +} + +# Set git config, automatically unsetting it after the test is over. +test_config () { + config_dir= + if test "$1" = -C + then + shift + config_dir=$1 + shift + fi + test_when_finished "test_unconfig ${config_dir:+-C '$config_dir'} '$1'" && + git ${config_dir:+-C "$config_dir"} config "$@" +} + +test_config_global () { + test_when_finished "test_unconfig --global '$1'" && + git config --global "$@" +} + +write_script () { + { + echo "#!${2-"$SHELL_PATH"}" && + cat + } >"$1" && + chmod +x "$1" +} + +# Usage: test_hook [options] <hook-name> <<-\EOF +# +# -C <dir>: +# Run all git commands in directory <dir> +# --setup +# Setup a hook for subsequent tests, i.e. don't remove it in a +# "test_when_finished" +# --clobber +# Overwrite an existing <hook-name>, if it exists. Implies +# --setup (i.e. the "test_when_finished" is assumed to have been +# set up already). +# --disable +# Disable (chmod -x) an existing <hook-name>, which must exist. +# --remove +# Remove (rm -f) an existing <hook-name>, which must exist. +test_hook () { + setup= && + clobber= && + disable= && + remove= && + indir= && + while test $# != 0 + do + case "$1" in + -C) + indir="$2" && + shift + ;; + --setup) + setup=t + ;; + --clobber) + clobber=t + ;; + --disable) + disable=t + ;; + --remove) + remove=t + ;; + -*) + BUG "invalid argument: $1" + ;; + *) + break + ;; + esac && + shift + done && + + git_dir=$(git -C "$indir" rev-parse --absolute-git-dir) && + hook_dir="$git_dir/hooks" && + hook_file="$hook_dir/$1" && + if test -n "$disable$remove" + then + test_path_is_file "$hook_file" && + if test -n "$disable" + then + chmod -x "$hook_file" + elif test -n "$remove" + then + rm -f "$hook_file" + fi && + return 0 + fi && + if test -z "$clobber" + then + test_path_is_missing "$hook_file" + fi && + if test -z "$setup$clobber" + then + test_when_finished "rm \"$hook_file\"" + fi && + write_script "$hook_file" +} + +# Use test_set_prereq to tell that a particular prerequisite is available. +# The prerequisite can later be checked for in two ways: +# +# - Explicitly using test_have_prereq. +# +# - Implicitly by specifying the prerequisite tag in the calls to +# test_expect_{success,failure} +# +# The single parameter is the prerequisite tag (a simple word, in all +# capital letters by convention). + +test_unset_prereq () { + ! test_have_prereq "$1" || + satisfied_prereq="${satisfied_prereq% $1 *} ${satisfied_prereq#* $1 }" +} + +test_set_prereq () { + if test -n "$GIT_TEST_FAIL_PREREQS_INTERNAL" + then + case "$1" in + # The "!" case is handled below with + # test_unset_prereq() + !*) + ;; + # List of things we can't easily pretend to not support + SYMLINKS) + ;; + # Inspecting whether GIT_TEST_FAIL_PREREQS is on + # should be unaffected. + FAIL_PREREQS) + ;; + *) + return + esac + fi + + case "$1" in + !*) + test_unset_prereq "${1#!}" + ;; + *) + satisfied_prereq="$satisfied_prereq$1 " + ;; + esac +} +satisfied_prereq=" " +lazily_testable_prereq= lazily_tested_prereq= + +# Usage: test_lazy_prereq PREREQ 'script' +test_lazy_prereq () { + lazily_testable_prereq="$lazily_testable_prereq$1 " + eval test_prereq_lazily_$1=\$2 +} + +test_run_lazy_prereq_ () { + script=' +mkdir -p "$TRASH_DIRECTORY/prereq-test-dir-'"$1"'" && +( + cd "$TRASH_DIRECTORY/prereq-test-dir-'"$1"'" &&'"$2"' +)' + say >&3 "checking prerequisite: $1" + say >&3 "$script" + test_eval_ "$script" + eval_ret=$? + rm -rf "$TRASH_DIRECTORY/prereq-test-dir-$1" + if test "$eval_ret" = 0; then + say >&3 "prerequisite $1 ok" + else + say >&3 "prerequisite $1 not satisfied" + fi + return $eval_ret +} + +test_have_prereq () { + # prerequisites can be concatenated with ',' + save_IFS=$IFS + IFS=, + set -- $* + IFS=$save_IFS + + total_prereq=0 + ok_prereq=0 + missing_prereq= + + for prerequisite + do + case "$prerequisite" in + !*) + negative_prereq=t + prerequisite=${prerequisite#!} + ;; + *) + negative_prereq= + esac + + case " $lazily_tested_prereq " in + *" $prerequisite "*) + ;; + *) + case " $lazily_testable_prereq " in + *" $prerequisite "*) + eval "script=\$test_prereq_lazily_$prerequisite" && + if test_run_lazy_prereq_ "$prerequisite" "$script" + then + test_set_prereq $prerequisite + fi + lazily_tested_prereq="$lazily_tested_prereq$prerequisite " + esac + ;; + esac + + total_prereq=$(($total_prereq + 1)) + case "$satisfied_prereq" in + *" $prerequisite "*) + satisfied_this_prereq=t + ;; + *) + satisfied_this_prereq= + esac + + case "$satisfied_this_prereq,$negative_prereq" in + t,|,t) + ok_prereq=$(($ok_prereq + 1)) + ;; + *) + # Keep a list of missing prerequisites; restore + # the negative marker if necessary. + prerequisite=${negative_prereq:+!}$prerequisite + + # Abort if this prereq was marked as required + if test -n "$GIT_TEST_REQUIRE_PREREQ" + then + case " $GIT_TEST_REQUIRE_PREREQ " in + *" $prerequisite "*) + BAIL_OUT "required prereq $prerequisite failed" + ;; + esac + fi + + if test -z "$missing_prereq" + then + missing_prereq=$prerequisite + else + missing_prereq="$prerequisite,$missing_prereq" + fi + esac + done + + test $total_prereq = $ok_prereq +} + +test_declared_prereq () { + case ",$test_prereq," in + *,$1,*) + return 0 + ;; + esac + return 1 +} + +test_verify_prereq () { + test -z "$test_prereq" || + expr >/dev/null "$test_prereq" : '[A-Z0-9_,!]*$' || + BUG "'$test_prereq' does not look like a prereq" +} + +test_expect_failure () { + test_start_ "$@" + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= + test "$#" = 2 || + BUG "not 2 or 3 parameters to test-expect-failure" + test_verify_prereq + export test_prereq + if ! test_skip "$@" + then + test -n "$test_skip_test_preamble" || + say >&3 "checking known breakage of $TEST_NUMBER.$test_count '$1': $2" + if test_run_ "$2" expecting_failure + then + test_known_broken_ok_ "$1" + else + test_known_broken_failure_ "$1" + fi + fi + test_finish_ +} + +test_expect_success () { + test_start_ "$@" + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= + test "$#" = 2 || + BUG "not 2 or 3 parameters to test-expect-success" + test_verify_prereq + export test_prereq + if ! test_skip "$@" + then + test -n "$test_skip_test_preamble" || + say >&3 "expecting success of $TEST_NUMBER.$test_count '$1': $2" + if test_run_ "$2" + then + test_ok_ "$1" + else + test_failure_ "$@" + fi + fi + test_finish_ +} + +# debugging-friendly alternatives to "test [-f|-d|-e]" +# The commands test the existence or non-existence of $1 +test_path_is_file () { + test "$#" -ne 1 && BUG "1 param" + if ! test -f "$1" + then + echo "File $1 doesn't exist" + false + fi +} + +test_path_is_file_not_symlink () { + test "$#" -ne 1 && BUG "1 param" + test_path_is_file "$1" && + if test -h "$1" + then + echo "$1 shouldn't be a symbolic link" + false + fi +} + +test_path_is_dir () { + test "$#" -ne 1 && BUG "1 param" + if ! test -d "$1" + then + echo "Directory $1 doesn't exist" + false + fi +} + +test_path_is_dir_not_symlink () { + test "$#" -ne 1 && BUG "1 param" + test_path_is_dir "$1" && + if test -h "$1" + then + echo "$1 shouldn't be a symbolic link" + false + fi +} + +test_path_exists () { + test "$#" -ne 1 && BUG "1 param" + if ! test -e "$1" + then + echo "Path $1 doesn't exist" + false + fi +} + +test_path_is_symlink () { + test "$#" -ne 1 && BUG "1 param" + if ! test -h "$1" + then + echo "Symbolic link $1 doesn't exist" + false + fi +} + +# Check if the directory exists and is empty as expected, barf otherwise. +test_dir_is_empty () { + test "$#" -ne 1 && BUG "1 param" + test_path_is_dir "$1" && + if test -n "$(ls -a1 "$1" | grep -E -v '^\.\.?$')" + then + echo "Directory '$1' is not empty, it contains:" + ls -la "$1" + return 1 + fi +} + +# Check if the file exists and has a size greater than zero +test_file_not_empty () { + test "$#" = 2 && BUG "2 param" + if ! test -s "$1" + then + echo "'$1' is not a non-empty file." + false + fi +} + +test_path_is_missing () { + test "$#" -ne 1 && BUG "1 param" + if test -e "$1" + then + echo "Path exists:" + ls -ld "$1" + false + fi +} + +# test_line_count checks that a file has the number of lines it +# ought to. For example: +# +# test_expect_success 'produce exactly one line of output' ' +# do something >output && +# test_line_count = 1 output +# ' +# +# is like "test $(wc -l <output) = 1" except that it passes the +# output through when the number of lines is wrong. + +test_line_count () { + if test $# != 3 + then + BUG "not 3 parameters to test_line_count" + elif ! test $(wc -l <"$3") "$1" "$2" + then + echo "test_line_count: line count for $3 !$1 $2" + cat "$3" + return 1 + fi +} + +# SYNOPSIS: +# test_stdout_line_count <bin-ops> <value> <cmd> [<args>...] +# +# test_stdout_line_count checks that the output of a command has the number +# of lines it ought to. For example: +# +# test_stdout_line_count = 3 git ls-files -u +# test_stdout_line_count -gt 10 ls +test_stdout_line_count () { + local ops val trashdir && + if test "$#" -le 3 + then + BUG "expect 3 or more arguments" + fi && + ops="$1" && + val="$2" && + shift 2 && + if ! trashdir="$(git rev-parse --git-dir)/trash"; then + BUG "expect to be run inside a worktree" + fi && + mkdir -p "$trashdir" && + "$@" >"$trashdir/output" && + test_line_count "$ops" "$val" "$trashdir/output" +} + + +test_file_size () { + test "$#" -ne 1 && BUG "1 param" + test-tool path-utils file-size "$1" +} + +# Returns success if a comma separated string of keywords ($1) contains a +# given keyword ($2). +# Examples: +# `list_contains "foo,bar" bar` returns 0 +# `list_contains "foo" bar` returns 1 + +list_contains () { + case ",$1," in + *,$2,*) + return 0 + ;; + esac + return 1 +} + +# Returns success if the arguments indicate that a command should be +# accepted by test_must_fail(). If the command is run with env, the env +# and its corresponding variable settings will be stripped before we +# test the command being run. +test_must_fail_acceptable () { + if test "$1" = "env" + then + shift + while test $# -gt 0 + do + case "$1" in + *?=*) + shift + ;; + *) + break + ;; + esac + done + fi + + case "$1" in + git|__git*|test-tool|test_terminal) + return 0 + ;; + *) + return 1 + ;; + esac +} + +# This is not among top-level (test_expect_success | test_expect_failure) +# but is a prefix that can be used in the test script, like: +# +# test_expect_success 'complain and die' ' +# do something && +# do something else && +# test_must_fail git checkout ../outerspace +# ' +# +# Writing this as "! git checkout ../outerspace" is wrong, because +# the failure could be due to a segv. We want a controlled failure. +# +# Accepts the following options: +# +# ok=<signal-name>[,<...>]: +# Don't treat an exit caused by the given signal as error. +# Multiple signals can be specified as a comma separated list. +# Currently recognized signal names are: sigpipe, success. +# (Don't use 'success', use 'test_might_fail' instead.) +# +# Do not use this to run anything but "git" and other specific testable +# commands (see test_must_fail_acceptable()). We are not in the +# business of vetting system supplied commands -- in other words, this +# is wrong: +# +# test_must_fail grep pattern output +# +# Instead use '!': +# +# ! grep pattern output + +test_must_fail () { + case "$1" in + ok=*) + _test_ok=${1#ok=} + shift + ;; + *) + _test_ok= + ;; + esac + if ! test_must_fail_acceptable "$@" + then + echo >&7 "test_must_fail: only 'git' is allowed: $*" + return 1 + fi + "$@" 2>&7 + exit_code=$? + if test $exit_code -eq 0 && ! list_contains "$_test_ok" success + then + echo >&4 "test_must_fail: command succeeded: $*" + return 1 + elif test_match_signal 13 $exit_code && list_contains "$_test_ok" sigpipe + then + return 0 + elif test $exit_code -gt 129 && test $exit_code -le 192 + then + echo >&4 "test_must_fail: died by signal $(($exit_code - 128)): $*" + return 1 + elif test $exit_code -eq 127 + then + echo >&4 "test_must_fail: command not found: $*" + return 1 + elif test $exit_code -eq 126 + then + echo >&4 "test_must_fail: valgrind error: $*" + return 1 + fi + return 0 +} 7>&2 2>&4 + +# Similar to test_must_fail, but tolerates success, too. This is +# meant to be used in contexts like: +# +# test_expect_success 'some command works without configuration' ' +# test_might_fail git config --unset all.configuration && +# do something +# ' +# +# Writing "git config --unset all.configuration || :" would be wrong, +# because we want to notice if it fails due to segv. +# +# Accepts the same options as test_must_fail. + +test_might_fail () { + test_must_fail ok=success "$@" 2>&7 +} 7>&2 2>&4 + +# Similar to test_must_fail and test_might_fail, but check that a +# given command exited with a given exit code. Meant to be used as: +# +# test_expect_success 'Merge with d/f conflicts' ' +# test_expect_code 1 git merge "merge msg" B master +# ' + +test_expect_code () { + want_code=$1 + shift + "$@" 2>&7 + exit_code=$? + if test $exit_code = $want_code + then + return 0 + fi + + echo >&4 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" + return 1 +} 7>&2 2>&4 + +# test_cmp is a helper function to compare actual and expected output. +# You can use it like: +# +# test_expect_success 'foo works' ' +# echo expected >expected && +# foo >actual && +# test_cmp expected actual +# ' +# +# This could be written as either "cmp" or "diff -u", but: +# - cmp's output is not nearly as easy to read as diff -u +# - not all diff versions understand "-u" + +test_cmp () { + test "$#" -ne 2 && BUG "2 param" + eval "$GIT_TEST_CMP" '"$@"' +} + +# Check that the given config key has the expected value. +# +# test_cmp_config [-C <dir>] <expected-value> +# [<git-config-options>...] <config-key> +# +# for example to check that the value of core.bar is foo +# +# test_cmp_config foo core.bar +# +test_cmp_config () { + local GD && + if test "$1" = "-C" + then + shift && + GD="-C $1" && + shift + fi && + printf "%s\n" "$1" >expect.config && + shift && + git $GD config "$@" >actual.config && + test_cmp expect.config actual.config +} + +# test_cmp_bin - helper to compare binary files + +test_cmp_bin () { + test "$#" -ne 2 && BUG "2 param" + cmp "$@" +} + +# Wrapper for grep which used to be used for +# GIT_TEST_GETTEXT_POISON=false. Only here as a shim for other +# in-flight changes. Should not be used and will be removed soon. +test_i18ngrep () { + eval "last_arg=\${$#}" + + test -f "$last_arg" || + BUG "test_i18ngrep requires a file to read as the last parameter" + + if test $# -lt 2 || + { test "x!" = "x$1" && test $# -lt 3 ; } + then + BUG "too few parameters to test_i18ngrep" + fi + + if test "x!" = "x$1" + then + shift + ! grep "$@" && return 0 + + echo >&4 "error: '! grep $@' did find a match in:" + else + grep "$@" && return 0 + + echo >&4 "error: 'grep $@' didn't find a match in:" + fi + + if test -s "$last_arg" + then + cat >&4 "$last_arg" + else + echo >&4 "<File '$last_arg' is empty>" + fi + + return 1 +} + +# Call any command "$@" but be more verbose about its +# failure. This is handy for commands like "test" which do +# not output anything when they fail. +verbose () { + "$@" && return 0 + echo >&4 "command failed: $(git rev-parse --sq-quote "$@")" + return 1 +} + +# Check if the file expected to be empty is indeed empty, and barfs +# otherwise. + +test_must_be_empty () { + test "$#" -ne 1 && BUG "1 param" + test_path_is_file "$1" && + if test -s "$1" + then + echo "'$1' is not empty, it contains:" + cat "$1" + return 1 + fi +} + +# Tests that its two parameters refer to the same revision, or if '!' is +# provided first, that its other two parameters refer to different +# revisions. +test_cmp_rev () { + local op='=' wrong_result=different + + if test $# -ge 1 && test "x$1" = 'x!' + then + op='!=' + wrong_result='the same' + shift + fi + if test $# != 2 + then + BUG "test_cmp_rev requires two revisions, but got $#" + else + local r1 r2 + r1=$(git rev-parse --verify "$1") && + r2=$(git rev-parse --verify "$2") || return 1 + + if ! test "$r1" "$op" "$r2" + then + cat >&4 <<-EOF + error: two revisions point to $wrong_result objects: + '$1': $r1 + '$2': $r2 + EOF + return 1 + fi + fi +} + +# Compare paths respecting core.ignoreCase +test_cmp_fspath () { + if test "x$1" = "x$2" + then + return 0 + fi + + if test true != "$(git config --get --type=bool core.ignorecase)" + then + return 1 + fi + + test "x$(echo "$1" | tr A-Z a-z)" = "x$(echo "$2" | tr A-Z a-z)" +} + +# Print a sequence of integers in increasing order, either with +# two arguments (start and end): +# +# test_seq 1 5 -- outputs 1 2 3 4 5 one line at a time +# +# or with one argument (end), in which case it starts counting +# from 1. + +test_seq () { + case $# in + 1) set 1 "$@" ;; + 2) ;; + *) BUG "not 1 or 2 parameters to test_seq" ;; + esac + test_seq_counter__=$1 + while test "$test_seq_counter__" -le "$2" + do + echo "$test_seq_counter__" + test_seq_counter__=$(( $test_seq_counter__ + 1 )) + done +} + +# This function can be used to schedule some commands to be run +# unconditionally at the end of the test to restore sanity: +# +# test_expect_success 'test core.capslock' ' +# git config core.capslock true && +# test_when_finished "git config --unset core.capslock" && +# hello world +# ' +# +# That would be roughly equivalent to +# +# test_expect_success 'test core.capslock' ' +# git config core.capslock true && +# hello world +# git config --unset core.capslock +# ' +# +# except that the greeting and config --unset must both succeed for +# the test to pass. +# +# Note that under --immediate mode, no clean-up is done to help diagnose +# what went wrong. + +test_when_finished () { + # We cannot detect when we are in a subshell in general, but by + # doing so on Bash is better than nothing (the test will + # silently pass on other shells). + test "${BASH_SUBSHELL-0}" = 0 || + BUG "test_when_finished does nothing in a subshell" + test_cleanup="{ $* + } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" +} + +# This function can be used to schedule some commands to be run +# unconditionally at the end of the test script, e.g. to stop a daemon: +# +# test_expect_success 'test git daemon' ' +# git daemon & +# daemon_pid=$! && +# test_atexit 'kill $daemon_pid' && +# hello world +# ' +# +# The commands will be executed before the trash directory is removed, +# i.e. the atexit commands will still be able to access any pidfiles or +# socket files. +# +# Note that these commands will be run even when a test script run +# with '--immediate' fails. Be careful with your atexit commands to +# minimize any changes to the failed state. + +test_atexit () { + # We cannot detect when we are in a subshell in general, but by + # doing so on Bash is better than nothing (the test will + # silently pass on other shells). + test "${BASH_SUBSHELL-0}" = 0 || + BUG "test_atexit does nothing in a subshell" + test_atexit_cleanup="{ $* + } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_atexit_cleanup" +} + +# Deprecated wrapper for "git init", use "git init" directly instead +# Usage: test_create_repo <directory> +test_create_repo () { + git init "$@" +} + +# This function helps on symlink challenged file systems when it is not +# important that the file system entry is a symbolic link. +# Use test_ln_s_add instead of "ln -s x y && git add y" to add a +# symbolic link entry y to the index. + +test_ln_s_add () { + if test_have_prereq SYMLINKS + then + ln -s "$1" "$2" && + git update-index --add "$2" + else + printf '%s' "$1" >"$2" && + ln_s_obj=$(git hash-object -w "$2") && + git update-index --add --cacheinfo 120000 $ln_s_obj "$2" && + # pick up stat info from the file + git update-index "$2" + fi +} + +# This function writes out its parameters, one per line +test_write_lines () { + printf "%s\n" "$@" +} + +perl () { + command "$PERL_PATH" "$@" 2>&7 +} 7>&2 2>&4 + +# Given the name of an environment variable with a bool value, normalize +# its value to a 0 (true) or 1 (false or empty string) return code. +# +# test_bool_env GIT_TEST_HTTPD <default-value> +# +# Return with code corresponding to the given default value if the variable +# is unset. +# Abort the test script if either the value of the variable or the default +# are not valid bool values. + +test_bool_env () { + if test $# != 2 + then + BUG "test_bool_env requires two parameters (variable name and default value)" + fi + + git env--helper --type=bool --default="$2" --exit-code "$1" + ret=$? + case $ret in + 0|1) # unset or valid bool value + ;; + *) # invalid bool value or something unexpected + error >&7 "test_bool_env requires bool values both for \$$1 and for the default fallback" + ;; + esac + return $ret +} + +# Exit the test suite, either by skipping all remaining tests or by +# exiting with an error. If our prerequisite variable $1 falls back +# on a default assume we were opportunistically trying to set up some +# tests and we skip. If it is explicitly "true", then we report a failure. +# +# The error/skip message should be given by $2. +# +test_skip_or_die () { + if ! test_bool_env "$1" false + then + skip_all=$2 + test_done + fi + error "$2" +} + +# The following mingw_* functions obey POSIX shell syntax, but are actually +# bash scripts, and are meant to be used only with bash on Windows. + +# A test_cmp function that treats LF and CRLF equal and avoids to fork +# diff when possible. +mingw_test_cmp () { + # Read text into shell variables and compare them. If the results + # are different, use regular diff to report the difference. + local test_cmp_a= test_cmp_b= + + # When text came from stdin (one argument is '-') we must feed it + # to diff. + local stdin_for_diff= + + # Since it is difficult to detect the difference between an + # empty input file and a failure to read the files, we go straight + # to diff if one of the inputs is empty. + if test -s "$1" && test -s "$2" + then + # regular case: both files non-empty + mingw_read_file_strip_cr_ test_cmp_a <"$1" + mingw_read_file_strip_cr_ test_cmp_b <"$2" + elif test -s "$1" && test "$2" = - + then + # read 2nd file from stdin + mingw_read_file_strip_cr_ test_cmp_a <"$1" + mingw_read_file_strip_cr_ test_cmp_b + stdin_for_diff='<<<"$test_cmp_b"' + elif test "$1" = - && test -s "$2" + then + # read 1st file from stdin + mingw_read_file_strip_cr_ test_cmp_a + mingw_read_file_strip_cr_ test_cmp_b <"$2" + stdin_for_diff='<<<"$test_cmp_a"' + fi + test -n "$test_cmp_a" && + test -n "$test_cmp_b" && + test "$test_cmp_a" = "$test_cmp_b" || + eval "diff -u \"\$@\" $stdin_for_diff" +} + +# $1 is the name of the shell variable to fill in +mingw_read_file_strip_cr_ () { + # Read line-wise using LF as the line separator + # and use IFS to strip CR. + local line + while : + do + if IFS=$'\r' read -r -d $'\n' line + then + # good + line=$line$'\n' + else + # we get here at EOF, but also if the last line + # was not terminated by LF; in the latter case, + # some text was read + if test -z "$line" + then + # EOF, really + break + fi + fi + eval "$1=\$$1\$line" + done +} + +# Like "env FOO=BAR some-program", but run inside a subshell, which means +# it also works for shell functions (though those functions cannot impact +# the environment outside of the test_env invocation). +test_env () { + ( + while test $# -gt 0 + do + case "$1" in + *=*) + eval "${1%%=*}=\${1#*=}" + eval "export ${1%%=*}" + shift + ;; + *) + "$@" 2>&7 + exit + ;; + esac + done + ) +} 7>&2 2>&4 + +# Returns true if the numeric exit code in "$2" represents the expected signal +# in "$1". Signals should be given numerically. +test_match_signal () { + if test "$2" = "$((128 + $1))" + then + # POSIX + return 0 + elif test "$2" = "$((256 + $1))" + then + # ksh + return 0 + fi + return 1 +} + +# Read up to "$1" bytes (or to EOF) from stdin and write them to stdout. +test_copy_bytes () { + perl -e ' + my $len = $ARGV[1]; + while ($len > 0) { + my $s; + my $nread = sysread(STDIN, $s, $len); + die "cannot read: $!" unless defined($nread); + last unless $nread; + print $s; + $len -= $nread; + } + ' - "$1" +} + +# run "$@" inside a non-git directory +nongit () { + test -d non-repo || + mkdir non-repo || + return 1 + + ( + GIT_CEILING_DIRECTORIES=$(pwd) && + export GIT_CEILING_DIRECTORIES && + cd non-repo && + "$@" 2>&7 + ) +} 7>&2 2>&4 + +# These functions are historical wrappers around "test-tool pkt-line" +# for older tests. Use "test-tool pkt-line" itself in new tests. +packetize () { + if test $# -gt 0 + then + packet="$*" + printf '%04x%s' "$((4 + ${#packet}))" "$packet" + else + test-tool pkt-line pack + fi +} + +packetize_raw () { + test-tool pkt-line pack-raw-stdin +} + +depacketize () { + test-tool pkt-line unpack +} + +# Converts base-16 data into base-8. The output is given as a sequence of +# escaped octals, suitable for consumption by 'printf'. +hex2oct () { + perl -ne 'printf "\\%03o", hex for /../g' +} + +# Set the hash algorithm in use to $1. Only useful when testing the testsuite. +test_set_hash () { + test_hash_algo="$1" +} + +# Detect the hash algorithm in use. +test_detect_hash () { + test_hash_algo="${GIT_TEST_DEFAULT_HASH:-sha1}" +} + +# Load common hash metadata and common placeholder object IDs for use with +# test_oid. +test_oid_init () { + test -n "$test_hash_algo" || test_detect_hash && + test_oid_cache <"$TEST_DIRECTORY/oid-info/hash-info" && + test_oid_cache <"$TEST_DIRECTORY/oid-info/oid" +} + +# Load key-value pairs from stdin suitable for use with test_oid. Blank lines +# and lines starting with "#" are ignored. Keys must be shell identifier +# characters. +# +# Examples: +# rawsz sha1:20 +# rawsz sha256:32 +test_oid_cache () { + local tag rest k v && + + { test -n "$test_hash_algo" || test_detect_hash; } && + while read tag rest + do + case $tag in + \#*) + continue;; + ?*) + # non-empty + ;; + *) + # blank line + continue;; + esac && + + k="${rest%:*}" && + v="${rest#*:}" && + + if ! expr "$k" : '[a-z0-9][a-z0-9]*$' >/dev/null + then + BUG 'bad hash algorithm' + fi && + eval "test_oid_${k}_$tag=\"\$v\"" + done +} + +# Look up a per-hash value based on a key ($1). The value must have been loaded +# by test_oid_init or test_oid_cache. +test_oid () { + local algo="${test_hash_algo}" && + + case "$1" in + --hash=*) + algo="${1#--hash=}" && + shift;; + *) + ;; + esac && + + local var="test_oid_${algo}_$1" && + + # If the variable is unset, we must be missing an entry for this + # key-hash pair, so exit with an error. + if eval "test -z \"\${$var+set}\"" + then + BUG "undefined key '$1'" + fi && + eval "printf '%s' \"\${$var}\"" +} + +# Insert a slash into an object ID so it can be used to reference a location +# under ".git/objects". For example, "deadbeef..." becomes "de/adbeef..". +test_oid_to_path () { + local basename=${1#??} + echo "${1%$basename}/$basename" +} + +# Parse oids from git ls-files --staged output +test_parse_ls_files_stage_oids () { + awk '{print $2}' - +} + +# Parse oids from git ls-tree output +test_parse_ls_tree_oids () { + awk '{print $3}' - +} + +# Choose a port number based on the test script's number and store it in +# the given variable name, unless that variable already contains a number. +test_set_port () { + local var=$1 port + + if test $# -ne 1 || test -z "$var" + then + BUG "test_set_port requires a variable name" + fi + + eval port=\$$var + case "$port" in + "") + # No port is set in the given env var, use the test + # number as port number instead. + # Remove not only the leading 't', but all leading zeros + # as well, so the arithmetic below won't (mis)interpret + # a test number like '0123' as an octal value. + port=${this_test#${this_test%%[1-9]*}} + if test "${port:-0}" -lt 1024 + then + # root-only port, use a larger one instead. + port=$(($port + 10000)) + fi + ;; + *[!0-9]*|0*) + error >&7 "invalid port number: $port" + ;; + *) + # The user has specified the port. + ;; + esac + + # Make sure that parallel '--stress' test jobs get different + # ports. + port=$(($port + ${GIT_TEST_STRESS_JOB_NR:-0})) + eval $var=$port +} + +# Tests for the hidden file attribute on Windows +test_path_is_hidden () { + test_have_prereq MINGW || + BUG "test_path_is_hidden can only be used on Windows" + + # Use the output of `attrib`, ignore the absolute path + case "$("$SYSTEMROOT"/system32/attrib "$1")" in *H*?:*) return 0;; esac + return 1 +} + +# Check that the given command was invoked as part of the +# trace2-format trace on stdin. +# +# test_subcommand [!] <command> <args>... < <trace> +# +# For example, to look for an invocation of "git upload-pack +# /path/to/repo" +# +# GIT_TRACE2_EVENT=event.log git fetch ... && +# test_subcommand git upload-pack "$PATH" <event.log +# +# If the first parameter passed is !, this instead checks that +# the given command was not called. +# +test_subcommand () { + local negate= + if test "$1" = "!" + then + negate=t + shift + fi + + local expr=$(printf '"%s",' "$@") + expr="${expr%,}" + + if test -n "$negate" + then + ! grep "\[$expr\]" + else + grep "\[$expr\]" + fi +} + +# Check that the given command was invoked as part of the +# trace2-format trace on stdin. +# +# test_region [!] <category> <label> git <command> <args>... +# +# For example, to look for trace2_region_enter("index", "do_read_index", repo) +# in an invocation of "git checkout HEAD~1", run +# +# GIT_TRACE2_EVENT="$(pwd)/trace.txt" GIT_TRACE2_EVENT_NESTING=10 \ +# git checkout HEAD~1 && +# test_region index do_read_index <trace.txt +# +# If the first parameter passed is !, this instead checks that +# the given region was not entered. +# +test_region () { + local expect_exit=0 + if test "$1" = "!" + then + expect_exit=1 + shift + fi + + grep -e '"region_enter".*"category":"'"$1"'","label":"'"$2"\" "$3" + exitcode=$? + + if test $exitcode != $expect_exit + then + return 1 + fi + + grep -e '"region_leave".*"category":"'"$1"'","label":"'"$2"\" "$3" + exitcode=$? + + if test $exitcode != $expect_exit + then + return 1 + fi + + return 0 +} + +# Print the destination of symlink(s) provided as arguments. Basically +# the same as the readlink command, but it's not available everywhere. +test_readlink () { + perl -le 'print readlink($_) for @ARGV' "$@" +} + +# Set mtime to a fixed "magic" timestamp in mid February 2009, before we +# run an operation that may or may not touch the file. If the file was +# touched, its timestamp will not accidentally have such an old timestamp, +# as long as your filesystem clock is reasonably correct. To verify the +# timestamp, follow up with test_is_magic_mtime. +# +# An optional increment to the magic timestamp may be specified as second +# argument. +test_set_magic_mtime () { + local inc=${2:-0} && + local mtime=$((1234567890 + $inc)) && + test-tool chmtime =$mtime "$1" && + test_is_magic_mtime "$1" $inc +} + +# Test whether the given file has the "magic" mtime set. This is meant to +# be used in combination with test_set_magic_mtime. +# +# An optional increment to the magic timestamp may be specified as second +# argument. Usually, this should be the same increment which was used for +# the associated test_set_magic_mtime. +test_is_magic_mtime () { + local inc=${2:-0} && + local mtime=$((1234567890 + $inc)) && + echo $mtime >.git/test-mtime-expect && + test-tool chmtime --get "$1" >.git/test-mtime-actual && + test_cmp .git/test-mtime-expect .git/test-mtime-actual + local ret=$? + rm -f .git/test-mtime-expect + rm -f .git/test-mtime-actual + return $ret +} + +# Given two filenames, parse both using 'git config --list --file' +# and compare the sorted output of those commands. Useful when +# wanting to ignore whitespace differences and sorting concerns. +test_cmp_config_output () { + git config --list --file="$1" >config-expect && + git config --list --file="$2" >config-actual && + sort config-expect >sorted-expect && + sort config-actual >sorted-actual && + test_cmp sorted-expect sorted-actual +} |