Adding debian version 2.06-13+deb12u1.debian/2.06-13+deb12u1debian

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 553 insertions, 0 deletions

diff --git a/debian/grub-extras/disabled/gpxe/src/drivers/net/3c595.c b/debian/grub-extras/disabled/gpxe/src/drivers/net/3c595.c
new file mode 100644
index 0000000..07c85d0
--- /dev/null
+++ b/debian/grub-extras/disabled/gpxe/src/drivers/net/3c595.c
@@ -0,0 +1,553 @@
+/*
+* 3c595.c -- 3COM 3C595 Fast Etherlink III PCI driver for etherboot
+*
+* Copyright (C) 2000 Shusuke Nisiyama <shu@athena.qe.eng.hokudai.ac.jp>
+* All rights reserved.
+* Mar. 14, 2000
+*
+*  This software may be used, modified, copied, distributed, and sold, in
+*  both source and binary form provided that the above copyright and these
+*  terms are retained. Under no circumstances are the authors responsible for
+*  the proper functioning of this software, nor do the authors assume any
+*  responsibility for damages incurred with its use.
+*
+* This code is based on Martin Renters' etherboot-4.4.3 3c509.c and 
+* Herb Peyerl's FreeBSD 3.4-RELEASE if_vx.c driver.
+*
+*  Copyright (C) 1993-1994, David Greenman, Martin Renters.
+*  Copyright (C) 1993-1995, Andres Vega Garcia.
+*  Copyright (C) 1995, Serge Babkin.
+*
+*  Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
+*
+* timlegge	08-24-2003	Add Multicast Support
+*/
+
+FILE_LICENCE ( BSD2 );
+
+/* #define EDEBUG */
+
+#include "etherboot.h"
+#include "nic.h"
+#include <gpxe/pci.h>
+#include <gpxe/ethernet.h>
+#include "3c595.h"
+
+static struct nic_operations t595_operations;
+
+static unsigned short	eth_nic_base;
+static unsigned short	vx_connector, vx_connectors;
+
+static struct connector_entry {
+  int bit;
+  char *name;
+} conn_tab[VX_CONNECTORS] = {
+#define CONNECTOR_UTP   0
+  { 0x08, "utp"},
+#define CONNECTOR_AUI   1
+  { 0x20, "aui"},
+/* dummy */
+  { 0, "???"},
+#define CONNECTOR_BNC   3
+  { 0x10, "bnc"},
+#define CONNECTOR_TX    4
+  { 0x02, "tx"},
+#define CONNECTOR_FX    5
+  { 0x04, "fx"},
+#define CONNECTOR_MII   6
+  { 0x40, "mii"},
+  { 0, "???"}
+};
+
+static void vxgetlink(void);
+static void vxsetlink(void);
+
+/**************************************************************************
+ETH_RESET - Reset adapter
+***************************************************************************/
+static void t595_reset(struct nic *nic)
+{
+	int i;
+
+	/***********************************************************
+			Reset 3Com 595 card
+	*************************************************************/
+
+	/* stop card */
+	outw(RX_DISABLE, BASE + VX_COMMAND);
+	outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+	outw(TX_DISABLE, BASE + VX_COMMAND);
+	outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
+	udelay(8000);
+	outw(RX_RESET, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+	outw(TX_RESET, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+	outw(C_INTR_LATCH, BASE + VX_COMMAND);
+	outw(SET_RD_0_MASK, BASE + VX_COMMAND);
+	outw(SET_INTR_MASK, BASE + VX_COMMAND);
+	outw(SET_RX_FILTER, BASE + VX_COMMAND);
+
+	/*
+	* initialize card
+	*/
+	VX_BUSY_WAIT;
+
+	GO_WINDOW(0);
+
+	/* Disable the card */
+/*	outw(0, BASE + VX_W0_CONFIG_CTRL); */
+
+	/* Configure IRQ to none */
+/*	outw(SET_IRQ(0), BASE + VX_W0_RESOURCE_CFG); */
+
+	/* Enable the card */
+/*	outw(ENABLE_DRQ_IRQ, BASE + VX_W0_CONFIG_CTRL); */
+
+	GO_WINDOW(2);
+
+	/* Reload the ether_addr. */
+	for (i = 0; i < ETH_ALEN; i++)
+		outb(nic->node_addr[i], BASE + VX_W2_ADDR_0 + i);
+
+	outw(RX_RESET, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+	outw(TX_RESET, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+	/* Window 1 is operating window */
+	GO_WINDOW(1);
+	for (i = 0; i < 31; i++)
+		inb(BASE + VX_W1_TX_STATUS);
+
+	outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+		S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+	outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+		S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+
+/*
+ * Attempt to get rid of any stray interrupts that occured during
+ * configuration.  On the i386 this isn't possible because one may
+ * already be queued.  However, a single stray interrupt is
+ * unimportant.
+ */
+
+	outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
+
+	outw(SET_RX_FILTER | FIL_INDIVIDUAL |
+	    FIL_BRDCST|FIL_MULTICAST, BASE + VX_COMMAND);
+
+	vxsetlink();
+/*{
+	int i,j;
+	i = CONNECTOR_TX;
+	GO_WINDOW(3);
+	j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
+	outl(BASE + VX_W3_INTERNAL_CFG, j | (i <<INTERNAL_CONNECTOR_BITS));
+        GO_WINDOW(4);
+        outw(LINKBEAT_ENABLE, BASE + VX_W4_MEDIA_TYPE);
+        GO_WINDOW(1);
+}*/
+
+	/* start tranciever and receiver */
+	outw(RX_ENABLE, BASE + VX_COMMAND);
+	outw(TX_ENABLE, BASE + VX_COMMAND);
+
+}
+
+/**************************************************************************
+ETH_TRANSMIT - Transmit a frame
+***************************************************************************/
+static char padmap[] = {
+	0, 3, 2, 1};
+
+static void t595_transmit(
+struct nic *nic,
+const char *d,			/* Destination */
+unsigned int t,			/* Type */
+unsigned int s,			/* size */
+const char *p)			/* Packet */
+{
+	register int len;
+	int pad;
+	int status;
+
+#ifdef EDEBUG
+	printf("{l=%d,t=%hX}",s+ETH_HLEN,t);
+#endif
+
+	/* swap bytes of type */
+	t= htons(t);
+
+	len=s+ETH_HLEN; /* actual length of packet */
+	pad = padmap[len & 3];
+
+	/*
+	* The 3c595 automatically pads short packets to minimum ethernet length,
+	* but we drop packets that are too large. Perhaps we should truncate
+	* them instead?
+	*/
+	if (len + pad > ETH_FRAME_LEN) {
+		return;
+	}
+
+	/* drop acknowledgements */
+	while(( status=inb(BASE + VX_W1_TX_STATUS) )& TXS_COMPLETE ) {
+		if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
+			outw(TX_RESET, BASE + VX_COMMAND);
+			outw(TX_ENABLE, BASE + VX_COMMAND);
+		}
+
+		outb(0x0, BASE + VX_W1_TX_STATUS);
+	}
+
+	while (inw(BASE + VX_W1_FREE_TX) < len + pad + 4) {
+		/* no room in FIFO */
+	}
+
+	outw(len, BASE + VX_W1_TX_PIO_WR_1);
+	outw(0x0, BASE + VX_W1_TX_PIO_WR_1);	/* Second dword meaningless */
+
+	/* write packet */
+	outsw(BASE + VX_W1_TX_PIO_WR_1, d, ETH_ALEN/2);
+	outsw(BASE + VX_W1_TX_PIO_WR_1, nic->node_addr, ETH_ALEN/2);
+	outw(t, BASE + VX_W1_TX_PIO_WR_1);
+	outsw(BASE + VX_W1_TX_PIO_WR_1, p, s / 2);
+	if (s & 1)
+		outb(*(p+s - 1), BASE + VX_W1_TX_PIO_WR_1);
+
+	while (pad--)
+		outb(0, BASE + VX_W1_TX_PIO_WR_1);	/* Padding */
+
+        /* wait for Tx complete */
+        while((inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS) != 0)
+                ;
+}
+
+/**************************************************************************
+ETH_POLL - Wait for a frame
+***************************************************************************/
+static int t595_poll(struct nic *nic, int retrieve)
+{
+	/* common variables */
+	/* variables for 3C595 */
+	short status, cst;
+	register short rx_fifo;
+
+	cst=inw(BASE + VX_STATUS);
+
+#ifdef EDEBUG
+	if(cst & 0x1FFF)
+		printf("-%hX-",cst);
+#endif
+
+	if( (cst & S_RX_COMPLETE)==0 ) {
+		/* acknowledge  everything */
+		outw(ACK_INTR | cst, BASE + VX_COMMAND);
+		outw(C_INTR_LATCH, BASE + VX_COMMAND);
+
+		return 0;
+	}
+
+	status = inw(BASE + VX_W1_RX_STATUS);
+#ifdef EDEBUG
+	printf("*%hX*",status);
+#endif
+
+	if (status & ERR_RX) {
+		outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
+		return 0;
+	}
+
+	rx_fifo = status & RX_BYTES_MASK;
+	if (rx_fifo==0)
+		return 0;
+
+	if ( ! retrieve ) return 1;
+
+		/* read packet */
+#ifdef EDEBUG
+	printf("[l=%d",rx_fifo);
+#endif
+	insw(BASE + VX_W1_RX_PIO_RD_1, nic->packet, rx_fifo / 2);
+	if(rx_fifo & 1)
+		nic->packet[rx_fifo-1]=inb(BASE + VX_W1_RX_PIO_RD_1);
+	nic->packetlen=rx_fifo;
+
+	while(1) {
+		status = inw(BASE + VX_W1_RX_STATUS);
+#ifdef EDEBUG
+		printf("*%hX*",status);
+#endif
+		rx_fifo = status & RX_BYTES_MASK;
+
+		if(rx_fifo>0) {
+			insw(BASE + VX_W1_RX_PIO_RD_1, nic->packet+nic->packetlen, rx_fifo / 2);
+			if(rx_fifo & 1)
+				nic->packet[nic->packetlen+rx_fifo-1]=inb(BASE + VX_W1_RX_PIO_RD_1);
+			nic->packetlen+=rx_fifo;
+#ifdef EDEBUG
+			printf("+%d",rx_fifo);
+#endif
+		}
+		if(( status & RX_INCOMPLETE )==0) {
+#ifdef EDEBUG
+			printf("=%d",nic->packetlen);
+#endif
+			break;
+		}
+		udelay(1000);
+	}
+
+	/* acknowledge reception of packet */
+	outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
+	while (inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS);
+#ifdef EDEBUG
+{
+	unsigned short type = 0;	/* used by EDEBUG */
+	type = (nic->packet[12]<<8) | nic->packet[13];
+	if(nic->packet[0]+nic->packet[1]+nic->packet[2]+nic->packet[3]+nic->packet[4]+
+	    nic->packet[5] == 0xFF*ETH_ALEN)
+		printf(",t=%hX,b]",type);
+	else
+		printf(",t=%hX]",type);
+}
+#endif
+	return 1;
+}
+
+
+/*************************************************************************
+	3Com 595 - specific routines
+**************************************************************************/
+
+static int
+eeprom_rdy()
+{
+	int i;
+
+	for (i = 0; is_eeprom_busy(BASE) && i < MAX_EEPROMBUSY; i++)
+		udelay(1000);
+	if (i >= MAX_EEPROMBUSY) {
+	        /* printf("3c595: eeprom failed to come ready.\n"); */
+		printf("3c595: eeprom is busy.\n"); /* memory in EPROM is tight */
+		return (0);
+	}
+	return (1);
+}
+
+/*
+ * get_e: gets a 16 bits word from the EEPROM. we must have set the window
+ * before
+ */
+static int
+get_e(offset)
+int offset;
+{
+	if (!eeprom_rdy())
+		return (0xffff);
+	outw(EEPROM_CMD_RD | offset, BASE + VX_W0_EEPROM_COMMAND);
+	if (!eeprom_rdy())
+		return (0xffff);
+	return (inw(BASE + VX_W0_EEPROM_DATA));
+}
+
+static void            
+vxgetlink(void)
+{
+    int n, k;
+
+    GO_WINDOW(3);
+    vx_connectors = inw(BASE + VX_W3_RESET_OPT) & 0x7f;
+    for (n = 0, k = 0; k < VX_CONNECTORS; k++) {
+      if (vx_connectors & conn_tab[k].bit) {
+        if (n > 0) {
+          printf("/");
+	}
+        printf("%s", conn_tab[k].name );
+        n++;
+      }
+    }
+    if (vx_connectors == 0) {
+        printf("no connectors!");
+        return;
+    }
+    GO_WINDOW(3);
+    vx_connector = (inl(BASE + VX_W3_INTERNAL_CFG) 
+                        & INTERNAL_CONNECTOR_MASK) 
+                        >> INTERNAL_CONNECTOR_BITS;
+    if (vx_connector & 0x10) {
+        vx_connector &= 0x0f;
+        printf("[*%s*]", conn_tab[vx_connector].name);
+        printf(": disable 'auto select' with DOS util!");
+    } else {
+        printf("[*%s*]", conn_tab[vx_connector].name);
+    }
+}
+
+static void            
+vxsetlink(void)
+{       
+    int i, j;
+    char *reason, *warning;
+    static char prev_conn = -1;
+
+    if (prev_conn == -1) {
+        prev_conn = vx_connector;
+    }
+
+    i = vx_connector;       /* default in EEPROM */
+    reason = "default";
+    warning = 0;
+
+    if ((vx_connectors & conn_tab[vx_connector].bit) == 0) {
+        warning = "strange connector type in EEPROM.";
+        reason = "forced";
+        i = CONNECTOR_UTP;
+    }
+
+        if (warning != 0) {
+            printf("warning: %s\n", warning);
+        }
+        printf("selected %s. (%s)\n", conn_tab[i].name, reason);
+
+    /* Set the selected connector. */
+    GO_WINDOW(3);
+    j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
+    outl(j | (i <<INTERNAL_CONNECTOR_BITS), BASE + VX_W3_INTERNAL_CFG);
+
+    /* First, disable all. */
+    outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
+    udelay(8000);
+    GO_WINDOW(4);
+    outw(0, BASE + VX_W4_MEDIA_TYPE);
+
+    /* Second, enable the selected one. */
+    switch(i) {
+      case CONNECTOR_UTP:
+        GO_WINDOW(4);
+        outw(ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE);
+        break;
+      case CONNECTOR_BNC:
+        outw(START_TRANSCEIVER,BASE + VX_COMMAND);
+        udelay(8000);
+        break;
+      case CONNECTOR_TX:
+      case CONNECTOR_FX:
+        GO_WINDOW(4);
+        outw(LINKBEAT_ENABLE, BASE + VX_W4_MEDIA_TYPE);
+        break;
+      default:  /* AUI and MII fall here */
+        break;
+    }
+    GO_WINDOW(1); 
+}
+
+static void t595_disable ( struct nic *nic ) {
+
+	t595_reset(nic);
+
+	outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
+	udelay(8000);
+	GO_WINDOW(4);
+	outw(0, BASE + VX_W4_MEDIA_TYPE);
+	GO_WINDOW(1);
+}
+
+static void t595_irq(struct nic *nic __unused, irq_action_t action __unused)
+{
+  switch ( action ) {
+  case DISABLE :
+    break;
+  case ENABLE :
+    break;
+  case FORCE :
+    break;
+  }
+}
+
+/**************************************************************************
+ETH_PROBE - Look for an adapter
+***************************************************************************/
+static int t595_probe ( struct nic *nic, struct pci_device *pci ) {
+
+	int i;
+	unsigned short *p;
+
+	if (pci->ioaddr == 0)
+		return 0;
+	eth_nic_base = pci->ioaddr;
+
+	nic->irqno  = 0;
+	nic->ioaddr = pci->ioaddr;
+
+	GO_WINDOW(0);
+	outw(GLOBAL_RESET, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+	vxgetlink();
+
+/*
+	printf("\nEEPROM:");
+	for (i = 0; i < (EEPROMSIZE/2); i++) {
+	  printf("%hX:", get_e(i));
+	}
+	printf("\n");
+*/
+	/*
+	* Read the station address from the eeprom
+	*/
+	p = (unsigned short *) nic->node_addr;
+	for (i = 0; i < 3; i++) {
+		GO_WINDOW(0);
+		p[i] = htons(get_e(EEPROM_OEM_ADDR_0 + i));
+		GO_WINDOW(2);
+		outw(ntohs(p[i]), BASE + VX_W2_ADDR_0 + (i * 2));
+	}
+
+	DBG ( "Ethernet address: %s\n", eth_ntoa (nic->node_addr) );
+
+	t595_reset(nic);
+	nic->nic_op	= &t595_operations;
+	return 1;
+
+}
+
+static struct nic_operations t595_operations = {
+	.connect	= dummy_connect,
+	.poll		= t595_poll,
+	.transmit	= t595_transmit,
+	.irq		= t595_irq,
+
+};
+
+static struct pci_device_id t595_nics[] = {
+PCI_ROM(0x10b7, 0x5900, "3c590",           "3Com590", 0),		/* Vortex 10Mbps */
+PCI_ROM(0x10b7, 0x5950, "3c595",           "3Com595", 0),		/* Vortex 100baseTx */
+PCI_ROM(0x10b7, 0x5951, "3c595-1",         "3Com595", 0),		/* Vortex 100baseT4 */
+PCI_ROM(0x10b7, 0x5952, "3c595-2",         "3Com595", 0),		/* Vortex 100base-MII */
+PCI_ROM(0x10b7, 0x9000, "3c900-tpo",       "3Com900-TPO", 0),	/* 10 Base TPO */
+PCI_ROM(0x10b7, 0x9001, "3c900-t4",        "3Com900-Combo", 0),	/* 10/100 T4 */
+PCI_ROM(0x10b7, 0x9004, "3c900b-tpo",      "3Com900B-TPO", 0),	/* 10 Base TPO */
+PCI_ROM(0x10b7, 0x9005, "3c900b-combo",    "3Com900B-Combo", 0),	/* 10 Base Combo */
+PCI_ROM(0x10b7, 0x9006, "3c900b-tpb2",     "3Com900B-2/T", 0),	/* 10 Base TP and Base2 */
+PCI_ROM(0x10b7, 0x900a, "3c900b-fl",       "3Com900B-FL", 0),	/* 10 Base F */
+PCI_ROM(0x10b7, 0x9800, "3c980-cyclone-1", "3Com980-Cyclone", 0),	/* Cyclone */
+PCI_ROM(0x10b7, 0x9805, "3c9805-1",        "3Com9805", 0),		/* Dual Port Server Cyclone */
+PCI_ROM(0x10b7, 0x7646, "3csoho100-tx-1",  "3CSOHO100-TX", 0),	/* Hurricane */
+PCI_ROM(0x10b7, 0x4500, "3c450-1",         "3Com450 HomePNA Tornado", 0),
+};
+
+PCI_DRIVER ( t595_driver, t595_nics, PCI_NO_CLASS );
+
+DRIVER ( "3C595", nic_driver, pci_driver, t595_driver,
+	 t595_probe, t595_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */