10 files changed, 993 insertions, 0 deletions
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/README b/grub-core/lib/libgcrypt/mpi/alpha/README
new file mode 100644
index 0000000..55c0a29
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/README
@@ -0,0 +1,53 @@
+This directory contains mpn functions optimized for DEC Alpha processors.
+
+RELEVANT OPTIMIZATION ISSUES
+
+EV4
+
+1. This chip has very limited store bandwidth.  The on-chip L1 cache is
+write-through, and a cache line is transfered from the store buffer to the
+off-chip L2 in as much 15 cycles on most systems.  This delay hurts
+mpn_add_n, mpn_sub_n, mpn_lshift, and mpn_rshift.
+
+2. Pairing is possible between memory instructions and integer arithmetic
+instructions.
+
+3. mulq and umulh is documented to have a latency of 23 cycles, but 2 of
+these cycles are pipelined.  Thus, multiply instructions can be issued at a
+rate of one each 21nd cycle.
+
+EV5
+
+1. The memory bandwidth of this chip seems excellent, both for loads and
+stores.  Even when the working set is larger than the on-chip L1 and L2
+caches, the perfromance remain almost unaffected.
+
+2. mulq has a measured latency of 13 cycles and an issue rate of 1 each 8th
+cycle.  umulh has a measured latency of 15 cycles and an issue rate of 1
+each 10th cycle.  But the exact timing is somewhat confusing.
+
+3. mpn_add_n.  With 4-fold unrolling, we need 37 instructions, whereof 12
+   are memory operations.  This will take at least
+	ceil(37/2) [dual issue] + 1 [taken branch] = 20 cycles
+   We have 12 memory cycles, plus 4 after-store conflict cycles, or 16 data
+   cache cycles, which should be completely hidden in the 20 issue cycles.
+   The computation is inherently serial, with these dependencies:
+     addq
+     /   \
+   addq  cmpult
+     |     |
+   cmpult  |
+       \  /
+        or
+   I.e., there is a 4 cycle path for each limb, making 16 cycles the absolute
+   minimum.  We could replace the `or' with a cmoveq/cmovne, which would save
+   a cycle on EV5, but that might waste a cycle on EV4.  Also, cmov takes 2
+   cycles.
+     addq
+     /   \
+   addq  cmpult
+     |      \
+   cmpult -> cmovne
+
+STATUS
+
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/distfiles b/grub-core/lib/libgcrypt/mpi/alpha/distfiles
new file mode 100644
index 0000000..f2ab9fc
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/distfiles
@@ -0,0 +1,11 @@
+README
+mpih-add1.S
+mpih-sub1.S
+mpih-mul1.S
+mpih-mul2.S
+mpih-mul3.S
+mpih-lshift.S
+mpih-rshift.S
+
+udiv-qrnnd.S
+
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/mpih-add1.S b/grub-core/lib/libgcrypt/mpi/alpha/mpih-add1.S
new file mode 100644
index 0000000..50dbb2b
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/mpih-add1.S
@@ -0,0 +1,124 @@
+/* alpha  add_n -- Add two limb vectors of the same length > 0 and store
+ *		   sum in a third limb vector.
+ * Copyright (C) 1995, 1998, 2001, 2002 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Libgcrypt is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * Libgcrypt is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+
+
+/*******************
+ *  mpi_limb_t
+ *  _gcry_mpih_add_n( mpi_ptr_t res_ptr,	($16)
+ *		   mpi_ptr_t s1_ptr,	($17)
+ *		   mpi_ptr_t s2_ptr,	($18)
+ *		   mpi_size_t size)	($19)
+ */
+
+
+	.set	noreorder
+	.set	noat
+.text
+	.align	3
+	.globl	_gcry_mpih_add_n
+	.ent	_gcry_mpih_add_n
+_gcry_mpih_add_n:
+	.frame	$30,0,$26,0
+
+	ldq	$3,0($17)
+	ldq	$4,0($18)
+
+	subq	$19,1,$19
+	and	$19,4-1,$2	# number of limbs in first loop
+	bis	$31,$31,$0
+	beq	$2,.L0		# if multiple of 4 limbs, skip first loop
+
+	subq	$19,$2,$19
+
+.Loop0: subq	$2,1,$2
+	ldq	$5,8($17)
+	addq	$4,$0,$4
+	ldq	$6,8($18)
+	cmpult	$4,$0,$1
+	addq	$3,$4,$4
+	cmpult	$4,$3,$0
+	stq	$4,0($16)
+	or	$0,$1,$0
+
+	addq	$17,8,$17
+	addq	$18,8,$18
+	bis	$5,$5,$3
+	bis	$6,$6,$4
+	addq	$16,8,$16
+	bne	$2,.Loop0
+
+.L0:	beq	$19,.Lend
+
+	.align	3
+.Loop:	subq	$19,4,$19
+
+	ldq	$5,8($17)
+	addq	$4,$0,$4
+	ldq	$6,8($18)
+	cmpult	$4,$0,$1
+	addq	$3,$4,$4
+	cmpult	$4,$3,$0
+	stq	$4,0($16)
+	or	$0,$1,$0
+
+	ldq	$3,16($17)
+	addq	$6,$0,$6
+	ldq	$4,16($18)
+	cmpult	$6,$0,$1
+	addq	$5,$6,$6
+	cmpult	$6,$5,$0
+	stq	$6,8($16)
+	or	$0,$1,$0
+
+	ldq	$5,24($17)
+	addq	$4,$0,$4
+	ldq	$6,24($18)
+	cmpult	$4,$0,$1
+	addq	$3,$4,$4
+	cmpult	$4,$3,$0
+	stq	$4,16($16)
+	or	$0,$1,$0
+
+	ldq	$3,32($17)
+	addq	$6,$0,$6
+	ldq	$4,32($18)
+	cmpult	$6,$0,$1
+	addq	$5,$6,$6
+	cmpult	$6,$5,$0
+	stq	$6,24($16)
+	or	$0,$1,$0
+
+	addq	$17,32,$17
+	addq	$18,32,$18
+	addq	$16,32,$16
+	bne	$19,.Loop
+
+.Lend:	addq	$4,$0,$4
+	cmpult	$4,$0,$1
+	addq	$3,$4,$4
+	cmpult	$4,$3,$0
+	stq	$4,0($16)
+	or	$0,$1,$0
+	ret	$31,($26),1
+
+	.end	_gcry_mpih_add_n
+
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/mpih-lshift.S b/grub-core/lib/libgcrypt/mpi/alpha/mpih-lshift.S
new file mode 100644
index 0000000..ded4b15
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/mpih-lshift.S
@@ -0,0 +1,122 @@
+/* alpha - left shift
+ *
+ *      Copyright (C) 1994, 1995, 1998, 2001,
+ *                    2002  Free Software Foundation, Inc.
+ *
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Libgcrypt is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * Libgcrypt is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ */
+
+
+
+/*******************
+ * mpi_limb_t
+ * _gcry_mpih_lshift( mpi_ptr_t wp,	(r16)
+ *		   mpi_ptr_t up,	(r17)
+ *		   mpi_size_t usize,	(r18)
+ *		   unsigned cnt)	(r19)
+ *
+ * This code runs at 4.8 cycles/limb on the 21064.  With infinite unrolling,
+ * it would take 4 cycles/limb.  It should be possible to get down to 3
+ * cycles/limb since both ldq and stq can be paired with the other used
+ * instructions.  But there are many restrictions in the 21064 pipeline that
+ * makes it hard, if not impossible, to get down to 3 cycles/limb:
+ *
+ * 1. ldq has a 3 cycle delay, srl and sll have a 2 cycle delay.
+ * 2. Only aligned instruction pairs can be paired.
+ * 3. The store buffer or silo might not be able to deal with the bandwidth.
+ */
+
+	.set	noreorder
+	.set	noat
+.text
+	.align	3
+	.globl	_gcry_mpih_lshift
+	.ent	_gcry_mpih_lshift
+_gcry_mpih_lshift:
+	.frame	$30,0,$26,0
+
+	s8addq	$18,$17,$17	# make r17 point at end of s1
+	ldq	$4,-8($17)	# load first limb
+	subq	$17,8,$17
+	subq	$31,$19,$7
+	s8addq	$18,$16,$16	# make r16 point at end of RES
+	subq	$18,1,$18
+	and	$18,4-1,$20	# number of limbs in first loop
+	srl	$4,$7,$0	# compute function result
+
+	beq	$20,.L0
+	subq	$18,$20,$18
+
+	.align	3
+.Loop0:
+	ldq	$3,-8($17)
+	subq	$16,8,$16
+	subq	$17,8,$17
+	subq	$20,1,$20
+	sll	$4,$19,$5
+	srl	$3,$7,$6
+	bis	$3,$3,$4
+	bis	$5,$6,$8
+	stq	$8,0($16)
+	bne	$20,.Loop0
+
+.L0:	beq	$18,.Lend
+
+	.align	3
+.Loop:	ldq	$3,-8($17)
+	subq	$16,32,$16
+	subq	$18,4,$18
+	sll	$4,$19,$5
+	srl	$3,$7,$6
+
+	ldq	$4,-16($17)
+	sll	$3,$19,$1
+	bis	$5,$6,$8
+	stq	$8,24($16)
+	srl	$4,$7,$2
+
+	ldq	$3,-24($17)
+	sll	$4,$19,$5
+	bis	$1,$2,$8
+	stq	$8,16($16)
+	srl	$3,$7,$6
+
+	ldq	$4,-32($17)
+	sll	$3,$19,$1
+	bis	$5,$6,$8
+	stq	$8,8($16)
+	srl	$4,$7,$2
+
+	subq	$17,32,$17
+	bis	$1,$2,$8
+	stq	$8,0($16)
+
+	bgt	$18,.Loop
+
+.Lend:	sll	$4,$19,$8
+	stq	$8,-8($16)
+	ret	$31,($26),1
+	.end	_gcry_mpih_lshift
+
+
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/mpih-mul1.S b/grub-core/lib/libgcrypt/mpi/alpha/mpih-mul1.S
new file mode 100644
index 0000000..cd91b10
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/mpih-mul1.S
@@ -0,0 +1,90 @@
+/* Alpha 21064 mpih-mul1.S -- Multiply a limb vector with a limb and store
+ *			      the result in a second limb vector.
+ *
+ *      Copyright (C) 1992, 1994, 1995, 1998, 
+ *                    2001, 2002 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Libgcrypt is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * Libgcrypt is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+
+/*******************
+ * mpi_limb_t
+ * _gcry_mpih_mul_1( mpi_ptr_t res_ptr,	(r16)
+ *		  mpi_ptr_t s1_ptr,	(r17)
+ *		  mpi_size_t s1_size,	(r18)
+ *		  mpi_limb_t s2_limb)	(r19)
+ *
+ * This code runs at 42 cycles/limb on the EV4 and 18 cycles/limb on the EV5.
+ *
+ * To improve performance for long multiplications, we would use
+ * 'fetch' for S1 and 'fetch_m' for RES.  It's not obvious how to use
+ * these instructions without slowing down the general code: 1. We can
+ * only have two prefetches in operation at any time in the Alpha
+ * architecture.  2. There will seldom be any special alignment
+ * between RES_PTR and S1_PTR.	Maybe we can simply divide the current
+ * loop into an inner and outer loop, having the inner loop handle
+ * exactly one prefetch block?
+ */
+
+	.set	noreorder
+	.set	noat
+.text
+	.align	3
+	.globl	_gcry_mpih_mul_1
+	.ent	_gcry_mpih_mul_1 2
+_gcry_mpih_mul_1:
+	.frame	$30,0,$26
+
+	ldq	$2,0($17)	# $2 = s1_limb
+	subq	$18,1,$18	# size--
+	mulq	$2,$19,$3	# $3 = prod_low
+	bic	$31,$31,$4	# clear cy_limb
+	umulh	$2,$19,$0	# $0 = prod_high
+	beq	$18,Lend1	# jump if size was == 1
+	ldq	$2,8($17)	# $2 = s1_limb
+	subq	$18,1,$18	# size--
+	stq	$3,0($16)
+	beq	$18,Lend2	# jump if size was == 2
+
+	.align	3
+Loop:	mulq	$2,$19,$3	# $3 = prod_low
+	addq	$4,$0,$0	# cy_limb = cy_limb + 'cy'
+	subq	$18,1,$18	# size--
+	umulh	$2,$19,$4	# $4 = cy_limb
+	ldq	$2,16($17)	# $2 = s1_limb
+	addq	$17,8,$17	# s1_ptr++
+	addq	$3,$0,$3	# $3 = cy_limb + prod_low
+	stq	$3,8($16)
+	cmpult	$3,$0,$0	# $0 = carry from (cy_limb + prod_low)
+	addq	$16,8,$16	# res_ptr++
+	bne	$18,Loop
+
+Lend2:	mulq	$2,$19,$3	# $3 = prod_low
+	addq	$4,$0,$0	# cy_limb = cy_limb + 'cy'
+	umulh	$2,$19,$4	# $4 = cy_limb
+	addq	$3,$0,$3	# $3 = cy_limb + prod_low
+	cmpult	$3,$0,$0	# $0 = carry from (cy_limb + prod_low)
+	stq	$3,8($16)
+	addq	$4,$0,$0	# cy_limb = prod_high + cy
+	ret	$31,($26),1
+Lend1:	stq	$3,0($16)
+	ret	$31,($26),1
+
+	.end	_gcry_mpih_mul_1
+
+
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/mpih-mul2.S b/grub-core/lib/libgcrypt/mpi/alpha/mpih-mul2.S
new file mode 100644
index 0000000..5eb6b98
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/mpih-mul2.S
@@ -0,0 +1,97 @@
+/* Alpha 21064 addmul_1 -- Multiply a limb vector with a limb and add
+ *			   the result to a second limb vector.
+ *
+ *      Copyright (C) 1992, 1994, 1995, 1998,
+ *                    2001, 2002 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Libgcrypt is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * Libgcrypt is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+
+/*******************
+ * mpi_limb_t
+ * _gcry_mpih_addmul_1( mpi_ptr_t res_ptr,      (r16)
+ *		     mpi_ptr_t s1_ptr,	     (r17)
+ *		     mpi_size_t s1_size,     (r18)
+ *		     mpi_limb_t s2_limb)     (r19)
+ *
+ * This code runs at 42 cycles/limb on EV4 and 18 cycles/limb on EV5.
+ */
+
+
+	.set	noreorder
+	.set	noat
+.text
+	.align	3
+	.globl	_gcry_mpih_addmul_1
+	.ent	_gcry_mpih_addmul_1 2
+_gcry_mpih_addmul_1:
+	.frame	$30,0,$26
+
+	ldq	$2,0($17)	# $2 = s1_limb
+	addq	$17,8,$17	# s1_ptr++
+	subq	$18,1,$18	# size--
+	mulq	$2,$19,$3	# $3 = prod_low
+	ldq	$5,0($16)	# $5 = *res_ptr
+	umulh	$2,$19,$0	# $0 = prod_high
+	beq	$18,.Lend1	# jump if size was == 1
+	ldq	$2,0($17)	# $2 = s1_limb
+	addq	$17,8,$17	# s1_ptr++
+	subq	$18,1,$18	# size--
+	addq	$5,$3,$3
+	cmpult	$3,$5,$4
+	stq	$3,0($16)
+	addq	$16,8,$16	# res_ptr++
+	beq	$18,.Lend2	# jump if size was == 2
+
+	.align	3
+.Loop:	mulq	$2,$19,$3	# $3 = prod_low
+	ldq	$5,0($16)	# $5 = *res_ptr
+	addq	$4,$0,$0	# cy_limb = cy_limb + 'cy'
+	subq	$18,1,$18	# size--
+	umulh	$2,$19,$4	# $4 = cy_limb
+	ldq	$2,0($17)	# $2 = s1_limb
+	addq	$17,8,$17	# s1_ptr++
+	addq	$3,$0,$3	# $3 = cy_limb + prod_low
+	cmpult	$3,$0,$0	# $0 = carry from (cy_limb + prod_low)
+	addq	$5,$3,$3
+	cmpult	$3,$5,$5
+	stq	$3,0($16)
+	addq	$16,8,$16	# res_ptr++
+	addq	$5,$0,$0	# combine carries
+	bne	$18,.Loop
+
+.Lend2: mulq	$2,$19,$3	# $3 = prod_low
+	ldq	$5,0($16)	# $5 = *res_ptr
+	addq	$4,$0,$0	# cy_limb = cy_limb + 'cy'
+	umulh	$2,$19,$4	# $4 = cy_limb
+	addq	$3,$0,$3	# $3 = cy_limb + prod_low
+	cmpult	$3,$0,$0	# $0 = carry from (cy_limb + prod_low)
+	addq	$5,$3,$3
+	cmpult	$3,$5,$5
+	stq	$3,0($16)
+	addq	$5,$0,$0	# combine carries
+	addq	$4,$0,$0	# cy_limb = prod_high + cy
+	ret	$31,($26),1
+.Lend1: addq	$5,$3,$3
+	cmpult	$3,$5,$5
+	stq	$3,0($16)
+	addq	$0,$5,$0
+	ret	$31,($26),1
+
+	.end	_gcry_mpih_addmul_1
+
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/mpih-mul3.S b/grub-core/lib/libgcrypt/mpi/alpha/mpih-mul3.S
new file mode 100644
index 0000000..7d5d2af
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/mpih-mul3.S
@@ -0,0 +1,95 @@
+/* Alpha 21064	submul_1 -- Multiply a limb vector with a limb and
+ *			    subtract the result from a second limb vector.
+ *      Copyright (C) 1992, 1994, 1995, 1998, 
+ *                    2001, 2002 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Libgcrypt is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * Libgcrypt is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+
+/*******************
+ * mpi_limb_t
+ * _gcry_mpih_submul_1( mpi_ptr_t res_ptr,      (r16   )
+ *		     mpi_ptr_t s1_ptr,	     (r17   )
+ *		     mpi_size_t s1_size,     (r18   )
+ *		     mpi_limb_t s2_limb)     (r19   )
+ *
+ * This code runs at 42 cycles/limb on EV4 and 18 cycles/limb on EV5.
+ */
+
+	.set	noreorder
+	.set	noat
+.text
+	.align	3
+	.globl	_gcry_mpih_submul_1
+	.ent	_gcry_mpih_submul_1 2
+_gcry_mpih_submul_1:
+	.frame	$30,0,$26
+
+	ldq	$2,0($17)	# $2 = s1_limb
+	addq	$17,8,$17	# s1_ptr++
+	subq	$18,1,$18	# size--
+	mulq	$2,$19,$3	# $3 = prod_low
+	ldq	$5,0($16)	# $5 = *res_ptr
+	umulh	$2,$19,$0	# $0 = prod_high
+	beq	$18,.Lend1	# jump if size was == 1
+	ldq	$2,0($17)	# $2 = s1_limb
+	addq	$17,8,$17	# s1_ptr++
+	subq	$18,1,$18	# size--
+	subq	$5,$3,$3
+	cmpult	$5,$3,$4
+	stq	$3,0($16)
+	addq	$16,8,$16	# res_ptr++
+	beq	$18,.Lend2	# jump if size was == 2
+
+	.align	3
+.Loop:	mulq	$2,$19,$3	# $3 = prod_low
+	ldq	$5,0($16)	# $5 = *res_ptr
+	addq	$4,$0,$0	# cy_limb = cy_limb + 'cy'
+	subq	$18,1,$18	# size--
+	umulh	$2,$19,$4	# $4 = cy_limb
+	ldq	$2,0($17)	# $2 = s1_limb
+	addq	$17,8,$17	# s1_ptr++
+	addq	$3,$0,$3	# $3 = cy_limb + prod_low
+	cmpult	$3,$0,$0	# $0 = carry from (cy_limb + prod_low)
+	subq	$5,$3,$3
+	cmpult	$5,$3,$5
+	stq	$3,0($16)
+	addq	$16,8,$16	# res_ptr++
+	addq	$5,$0,$0	# combine carries
+	bne	$18,.Loop
+
+.Lend2: mulq	$2,$19,$3	# $3 = prod_low
+	ldq	$5,0($16)	# $5 = *res_ptr
+	addq	$4,$0,$0	# cy_limb = cy_limb + 'cy'
+	umulh	$2,$19,$4	# $4 = cy_limb
+	addq	$3,$0,$3	# $3 = cy_limb + prod_low
+	cmpult	$3,$0,$0	# $0 = carry from (cy_limb + prod_low)
+	subq	$5,$3,$3
+	cmpult	$5,$3,$5
+	stq	$3,0($16)
+	addq	$5,$0,$0	# combine carries
+	addq	$4,$0,$0	# cy_limb = prod_high + cy
+	ret	$31,($26),1
+.Lend1: subq	$5,$3,$3
+	cmpult	$5,$3,$5
+	stq	$3,0($16)
+	addq	$0,$5,$0
+	ret	$31,($26),1
+
+	.end	_gcry_mpih_submul_1
+
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/mpih-rshift.S b/grub-core/lib/libgcrypt/mpi/alpha/mpih-rshift.S
new file mode 100644
index 0000000..f0c9814
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/mpih-rshift.S
@@ -0,0 +1,118 @@
+/* alpha    rshift
+ *      Copyright (C) 1994, 1995, 1998, 1999,
+ *                    2000, 2001, 2002 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Libgcrypt is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * Libgcrypt is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ */
+
+
+
+
+/*******************
+ * mpi_limb_t
+ * _gcry_mpih_rshift( mpi_ptr_t wp,	(r16)
+ *		   mpi_ptr_t up,	(r17)
+ *		   mpi_size_t usize,	(r18)
+ *		   unsigned cnt)	(r19)
+ *
+ * This code runs at 4.8 cycles/limb on the 21064.  With infinite unrolling,
+ * it would take 4 cycles/limb.  It should be possible to get down to 3
+ * cycles/limb since both ldq and stq can be paired with the other used
+ * instructions.  But there are many restrictions in the 21064 pipeline that
+ * makes it hard, if not impossible, to get down to 3 cycles/limb:
+ *
+ * 1. ldq has a 3 cycle delay, srl and sll have a 2 cycle delay.
+ * 2. Only aligned instruction pairs can be paired.
+ * 3. The store buffer or silo might not be able to deal with the bandwidth.
+ */
+
+	.set	noreorder
+	.set	noat
+.text
+	.align	3
+	.globl	_gcry_mpih_rshift
+	.ent	_gcry_mpih_rshift
+_gcry_mpih_rshift:
+	.frame	$30,0,$26,0
+
+	ldq	$4,0($17)	# load first limb
+	addq	$17,8,$17
+	subq	$31,$19,$7
+	subq	$18,1,$18
+	and	$18,4-1,$20	# number of limbs in first loop
+	sll	$4,$7,$0	# compute function result
+
+	beq	$20,.R0
+	subq	$18,$20,$18
+
+	.align	3
+.Roop0:
+	ldq	$3,0($17)
+	addq	$16,8,$16
+	addq	$17,8,$17
+	subq	$20,1,$20
+	srl	$4,$19,$5
+	sll	$3,$7,$6
+	bis	$3,$3,$4
+	bis	$5,$6,$8
+	stq	$8,-8($16)
+	bne	$20,.Roop0
+
+.R0:	beq	$18,.Rend
+
+	.align	3
+.Roop:	ldq	$3,0($17)
+	addq	$16,32,$16
+	subq	$18,4,$18
+	srl	$4,$19,$5
+	sll	$3,$7,$6
+
+	ldq	$4,8($17)
+	srl	$3,$19,$1
+	bis	$5,$6,$8
+	stq	$8,-32($16)
+	sll	$4,$7,$2
+
+	ldq	$3,16($17)
+	srl	$4,$19,$5
+	bis	$1,$2,$8
+	stq	$8,-24($16)
+	sll	$3,$7,$6
+
+	ldq	$4,24($17)
+	srl	$3,$19,$1
+	bis	$5,$6,$8
+	stq	$8,-16($16)
+	sll	$4,$7,$2
+
+	addq	$17,32,$17
+	bis	$1,$2,$8
+	stq	$8,-8($16)
+
+	bgt	$18,.Roop
+
+.Rend:	srl	$4,$19,$8
+	stq	$8,0($16)
+	ret	$31,($26),1
+	.end	_gcry_mpih_rshift
+
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/mpih-sub1.S b/grub-core/lib/libgcrypt/mpi/alpha/mpih-sub1.S
new file mode 100644
index 0000000..9a64446
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/mpih-sub1.S
@@ -0,0 +1,124 @@
+/* Alpha  sub_n -- Subtract two limb vectors of the same length > 0 and
+ *		  store difference in a third limb vector.
+ *      Copyright (C) 1995, 1998, 
+ *                    2001, 2002 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Libgcrypt is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * Libgcrypt is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+
+/*******************
+ *  mpi_limb_t
+ *  _gcry_mpih_sub_n( mpi_ptr_t res_ptr,	(r16)
+ *		   mpi_ptr_t s1_ptr,	(r17)
+ *		   mpi_ptr_t s2_ptr,	(r18)
+ *		   mpi_size_t size)	(r19)
+ */
+
+	.set	noreorder
+	.set	noat
+.text
+	.align	3
+	.globl	_gcry_mpih_sub_n
+	.ent	_gcry_mpih_sub_n
+_gcry_mpih_sub_n:
+	.frame	$30,0,$26,0
+
+	ldq	$3,0($17)
+	ldq	$4,0($18)
+
+	subq	$19,1,$19
+	and	$19,4-1,$2	# number of limbs in first loop
+	bis	$31,$31,$0
+	beq	$2,.L0		# if multiple of 4 limbs, skip first loop
+
+	subq	$19,$2,$19
+
+.Loop0: subq	$2,1,$2
+	ldq	$5,8($17)
+	addq	$4,$0,$4
+	ldq	$6,8($18)
+	cmpult	$4,$0,$1
+	subq	$3,$4,$4
+	cmpult	$3,$4,$0
+	stq	$4,0($16)
+	or	$0,$1,$0
+
+	addq	$17,8,$17
+	addq	$18,8,$18
+	bis	$5,$5,$3
+	bis	$6,$6,$4
+	addq	$16,8,$16
+	bne	$2,.Loop0
+
+.L0:	beq	$19,.Lend
+
+	.align	3
+.Loop:	subq	$19,4,$19
+
+	ldq	$5,8($17)
+	addq	$4,$0,$4
+	ldq	$6,8($18)
+	cmpult	$4,$0,$1
+	subq	$3,$4,$4
+	cmpult	$3,$4,$0
+	stq	$4,0($16)
+	or	$0,$1,$0
+
+	ldq	$3,16($17)
+	addq	$6,$0,$6
+	ldq	$4,16($18)
+	cmpult	$6,$0,$1
+	subq	$5,$6,$6
+	cmpult	$5,$6,$0
+	stq	$6,8($16)
+	or	$0,$1,$0
+
+	ldq	$5,24($17)
+	addq	$4,$0,$4
+	ldq	$6,24($18)
+	cmpult	$4,$0,$1
+	subq	$3,$4,$4
+	cmpult	$3,$4,$0
+	stq	$4,16($16)
+	or	$0,$1,$0
+
+	ldq	$3,32($17)
+	addq	$6,$0,$6
+	ldq	$4,32($18)
+	cmpult	$6,$0,$1
+	subq	$5,$6,$6
+	cmpult	$5,$6,$0
+	stq	$6,24($16)
+	or	$0,$1,$0
+
+	addq	$17,32,$17
+	addq	$18,32,$18
+	addq	$16,32,$16
+	bne	$19,.Loop
+
+.Lend:	addq	$4,$0,$4
+	cmpult	$4,$0,$1
+	subq	$3,$4,$4
+	cmpult	$3,$4,$0
+	stq	$4,0($16)
+	or	$0,$1,$0
+	ret	$31,($26),1
+
+	.end	_gcry_mpih_sub_n
+
+
diff --git a/grub-core/lib/libgcrypt/mpi/alpha/udiv-qrnnd.S b/grub-core/lib/libgcrypt/mpi/alpha/udiv-qrnnd.S
new file mode 100644
index 0000000..dd0c52d
--- /dev/null
+++ b/grub-core/lib/libgcrypt/mpi/alpha/udiv-qrnnd.S
@@ -0,0 +1,159 @@
+/* Alpha 21064 __udiv_qrnnd
+ *
+ *      Copyright (C) 1992, 1994, 1995, 1998,
+ *                    2001, 2002 Free Software Foundation, Inc.
+ *
+ * This file is part of Libgcrypt.
+ *
+ * Libgcrypt is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * Libgcrypt is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ */
+
+
+
+	.set noreorder
+	.set noat
+.text
+	.align	3
+	.globl	__udiv_qrnnd
+	.ent	__udiv_qrnnd
+__udiv_qrnnd:
+	.frame $30,0,$26,0
+	.prologue 0
+#define cnt	$2
+#define tmp	$3
+#define rem_ptr $16
+#define n1	$17
+#define n0	$18
+#define d	$19
+#define qb	$20
+
+	ldiq	cnt,16
+	blt	d,.Largedivisor
+
+.Loop1: cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	subq	cnt,1,cnt
+	bgt	cnt,.Loop1
+	stq	n1,0(rem_ptr)
+	bis	$31,n0,$0
+	ret	$31,($26),1
+
+.Largedivisor:
+	and	n0,1,$4
+
+	srl	n0,1,n0
+	sll	n1,63,tmp
+	or	tmp,n0,n0
+	srl	n1,1,n1
+
+	and	d,1,$6
+	srl	d,1,$5
+	addq	$5,$6,$5
+
+.Loop2: cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	subq	cnt,1,cnt
+	bgt	cnt,.Loop2
+
+	addq	n1,n1,n1
+	addq	$4,n1,n1
+	bne	$6,.LOdd
+	stq	n1,0(rem_ptr)
+	bis	$31,n0,$0
+	ret	$31,($26),1
+
+.LOdd:
+	/* q' in n0. r' in n1 */
+	addq	n1,n0,n1
+	cmpult	n1,n0,tmp	# tmp := carry from addq
+	beq	tmp,.LLp6
+	addq	n0,1,n0
+	subq	n1,d,n1
+.LLp6:	cmpult	n1,d,tmp
+	bne	tmp,.LLp7
+	addq	n0,1,n0
+	subq	n1,d,n1
+.LLp7:
+	stq	n1,0(rem_ptr)
+	bis	$31,n0,$0
+	ret	$31,($26),1
+
+	.end	__udiv_qrnnd