Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 219 insertions, 0 deletions

diff --git a/offapi/com/sun/star/sdb/application/CopyTableWizard.idl b/offapi/com/sun/star/sdb/application/CopyTableWizard.idl
new file mode 100644
index 000000000..eb7e4b689
--- /dev/null
+++ b/offapi/com/sun/star/sdb/application/CopyTableWizard.idl
@@ -0,0 +1,219 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef __com_sun_star_sdb_application_CopyTableWizard_idl__
+#define __com_sun_star_sdb_application_CopyTableWizard_idl__
+
+#include <com/sun/star/sdb/application/XCopyTableWizard.idl>
+#include <com/sun/star/beans/XPropertySet.idl>
+#include <com/sun/star/lang/IllegalArgumentException.idl>
+#include <com/sun/star/lang/WrappedTargetException.idl>
+#include <com/sun/star/task/XInteractionHandler.idl>
+#include <com/sun/star/sdbc/SQLException.idl>
+
+
+module com { module sun { module star { module sdb { module application {
+
+
+/** describes a wizard which can be used to copy table like data from one
+    database to another.
+
+    <dl>
+    <dt><b><a name="interaction"></a>Interactions</b></dt>
+    <dd>
+        <p>There are various cases where the wizard needs to interact with the user (except of
+        course the obvious case to display and operate the wizard dialog itself). For those cases,
+        an interaction handler is needed, which is used for
+        <ul>
+            <li>fulfilling parameter requests. This might become necessary if the copy source
+            describes a parametrized query.</li>
+            <li>user interaction in case copying a row fails. If no copy table listener is
+            registered at the wizard, or none of the registered listener handles an error during
+            copying a row, or a registered listeners explicitly tells the wizard to ask the user
+            how to handle the error, then the interaction handler is used together with the
+            error (an <code>SQLException</code>, usually) that happened.</li>
+            <li>displaying other errors which happen during copying, in particular errors in
+            creating the target table or view.</li>
+        </ul></p>
+
+        <p>When you do not specify an interaction handler by using the
+        createWithInteractionHandler() constructor, the wizard will use the interaction
+        handler associated with the copy target, i.e. the interaction handler specified when loading
+        the document which the copy target refers to. If the copy target cannot be associated with
+        a database document (e.g. because it is a mere <code>ConnectionResource</code>, or a connection
+        not obtained from a data source), or if the copy target's database document cannot provide
+        an interaction handler, a newly-created instance of an interaction handler is used.</p>
+
+        <p>There's one exception to the above, however: Upon creating the copy table wizard,
+        the copy source and the copy target descriptors are used to create a Connection. For any
+        interaction during this phase - including, for instance, necessary authentication -, the
+        interaction handler of the respective data source is used, no matter what you specified
+        in createWithInteractionHandler(). Only if there is no such interaction
+        handler, the processing described above, to find another handler, is applied.</p>
+    </dd>
+    </dl>
+
+    @see ::com::sun::star::sdb::ParametersRequest
+    @see XCopyTableWizard::addCopyTableListener
+    @see CopyTableContinuation
+    @see ::com::sun::star::document::MediaDescriptor::InteractionHandler
+    @see ::com::sun::star::sdb::DatabaseDocument
+    @see ::com::sun::star::sdb::DataSource
+    @see ::com::sun::star::sdb::DataAccessDescriptor::ConnectionResource
+    @see ::com::sun::star::sdb::InteractionHandler
+
+    @since OOo 2.4
+ */
+service CopyTableWizard : XCopyTableWizard
+{
+    /** creates an executable wizard dialog, which is to guide the user through copying
+        a table from one database to another.
+
+        <p>At creation time, an attempt will be made to obtain the connections described
+        by Source resp. Dest. Failing to do so will result in an
+        exception.</p>
+
+        <p>If the connection has been newly created by the wizard (e.g. because the
+        data access descriptor specified a <code>DataSource</code> instead of an <code>ActiveConnection</code>),
+        then this connection will be disposed upon disposal of the wizard.</p>
+
+        @param Source
+            the com::sun::star::sdb::DataAccessDescriptor describing the
+            data to copy.
+
+            <p>The following members of the <code>DataAccessDescriptor</code> are supported, and evaluated
+            in the given order:
+            <ol><li><code>ActiveConnection</code></li>
+                <li><code>DataSourceName</code></li>
+                <li><code>DatabaseLocation</code></li>
+                <li><code>ConnectionResource</code></li>
+                <li><code>ConnectionInfo</code></li>
+                <li><code>Command</code></li>
+                <li><code>CommandType</code></li>
+            </ol>
+            The first 5 items are used to obtain the connection, the last two to determine which
+            of the connection's objects is to be copied. Note that <code>Command</code> and <code>CommandType</code>
+            are required.</p>
+
+            <p>Additionally to the obvious restrictions (such as that creating a view is not possible
+            if the copy source and the copy destination denote different databases), the following restrictions
+            apply to the settings, and possible combinations:
+            <ul><li>Only com::sun::star::sdb::CommandType::TABLE and
+                com::sun::star::sdb::CommandType::QUERY are supported.</li>
+
+                <li>If you specify a <code>ConnectionResource</code>, or an
+                <code>ActiveConnection</code> which implements a com::sun::star::sdbc::Connection only
+                (as opposed to a com::sun::star::sdb::Connection), then the resulting connection is
+                not able to provide queries, thus a command type <code>QUERY</code> will be rejected.</li>
+
+                <li><code>Filter</code>, <code>Order</code>, <code>HavingClause</code> and <code>GroupBy</code>
+                are unsupported at the moment.</li>
+            </ul>
+            Violating any of the above restrictions will result in an error at creation time.</p>
+
+        @param Destination
+            the com::sun::star::sdb::DataAccessDescriptor describing the
+            target for the copy operation.
+
+            <p>Only <code>DataSourceName</code>, <code>DatabaseLocation</code>, <code>ActiveConnection</code>
+            are supported, effectively describing the target connection to copy the data to. They're evaluated
+            in the order mentioned here, so if multiple of the are present, only the first one is evaluated.</p>
+
+            <p>Also, at the moment the connection which is implied by either of the settings above
+            must support the com::sun::star::sdb::Connection service. In particular,
+            it is not sufficient to pass an SDBC-level connection.</p>
+
+            <p>Note that creating a view (see CopyTableOperation::CreateAsView) is
+            not supported if the target connection is an SDBC-level connection only.</p>
+
+        @throws ::com::sun::star::lang::IllegalArgumentException
+            if
+            <ul><li>either <code>Source</code> or <code>Destination</code> is `NULL`</li>
+                <li>either <code>Source</code> or <code>Destination</code> are not sufficient
+                    to describe a database connection.</li>
+                <li><code>Source</code> is not sufficient to describe the to-be-copied data</li>
+                <li>either <code>Source</code> or <code>Destination</code> contain unsupported settings.</li>
+            </ul>
+
+        @throws ::com::sun::star::sdbc::SQLException
+            if an error occurs during obtaining the source or destination connection. Those errors
+            are passed unchanged to the creator of the wizard.
+
+        @throws ::com::sun::star::lang::WrappedTargetException
+            if an error other than the ones mentioned above occurs while extracting the necessary
+            information from any of the data access descriptors. For instance, this might
+            be a com::sun::star::sdbc::SQLException thrown upon connecting
+            to a data source described by the descriptor's <code>DataSourceName</code> member.
+
+        @see ::com::sun::star::sdb::DataAccessDescriptor
+    */
+    create(
+        [in] ::com::sun::star::beans::XPropertySet Source,
+        [in] ::com::sun::star::beans::XPropertySet Destination
+    )
+        raises  (   ::com::sun::star::lang::IllegalArgumentException
+                ,   ::com::sun::star::sdbc::SQLException
+                ,   ::com::sun::star::lang::WrappedTargetException
+                );
+
+    /** creates an executable wizard dialog, which is to guide the user through copying
+        a table from one database to another.
+
+        <p>The only difference to the create() constructor is that
+        <code>createWithInteractionHandler</code> takes an additional argument, which
+        can be used to intercept interactions (such as error messages) during the wizard
+        run.</p>
+
+        @param Source
+            the com::sun::star::sdb::DataAccessDescriptor describing the
+            source for the copy operation.
+
+        @param Destination
+            the com::sun::star::sdb::DataAccessDescriptor describing the
+            target for the copy operation.
+
+        @param InteractionHandler
+            specifies an interaction handler to use when user input is required.
+
+            <p>When specifying this parameter, you should use an implementation
+            supporting the com::sun::star::sdb::InteractionHandler, since
+            the general-purpose com::sun::star::task::InteractionHandler cannot
+            handle all requests described <a href="#interaction">above</a>.</p>
+
+        @see ::com::sun::star::sdb::InteractionHandler
+    */
+    createWithInteractionHandler(
+        [in] ::com::sun::star::beans::XPropertySet Source,
+        [in] ::com::sun::star::beans::XPropertySet Destination,
+        [in] ::com::sun::star::task::XInteractionHandler InteractionHandler
+    )
+        raises  (   ::com::sun::star::lang::IllegalArgumentException
+                ,   ::com::sun::star::sdbc::SQLException
+                ,   ::com::sun::star::lang::WrappedTargetException
+                );
+
+};
+
+
+}; }; }; }; };
+
+
+#endif
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */